From 44388c7ead4b2bae9f82bc0862475640c50f357d Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 5 Nov 2007 15:52:11 -0800 Subject: [PATCH] sky2: dont change LED after autoneg Don't need to change LED's after auto negotiation, the chip sets them correctly. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index eaab3d8..3c08db4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1820,29 +1820,6 @@ static void sky2_link_up(struct sky2_port *sky2) sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); - if (hw->flags & SKY2_HW_NEWER_PHY) { - u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); - u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */ - - switch(sky2->speed) { - case SPEED_10: - led |= PHY_M_LEDC_INIT_CTRL(7); - break; - - case SPEED_100: - led |= PHY_M_LEDC_STA1_CTRL(7); - break; - - case SPEED_1000: - led |= PHY_M_LEDC_STA0_CTRL(7); - break; - } - - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } - if (netif_msg_link(sky2)) printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", -- 2.7.4