From 440bca81f0aaff58f16e75dc779a8e3da6bc2af4 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 25 May 2020 13:39:59 +0200 Subject: [PATCH] configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit) This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Matthias Brugger --- configs/rpi_4_defconfig | 9 +++++++++ configs/rpi_arm64_defconfig | 8 +++++++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig index f0301dc..b42efe6 100644 --- a/configs/rpi_4_defconfig +++ b/configs/rpi_4_defconfig @@ -6,6 +6,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_SIZE=0x4000 CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set @@ -13,6 +15,8 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y CONFIG_OF_BOARD=y CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" @@ -26,12 +30,17 @@ CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_BCM2835=y CONFIG_DM_ETH=y CONFIG_BCMGENET=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_BRCMSTB=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB=y CONFIG_DM_USB=y CONFIG_DM_USB_GADGET=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig index d16c238..0feea7f 100644 --- a/configs/rpi_arm64_defconfig +++ b/configs/rpi_arm64_defconfig @@ -7,13 +7,14 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y -CONFIG_PREBOOT="usb start" +CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y CONFIG_OF_BOARD=y @@ -26,11 +27,16 @@ CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_BCM2835=y CONFIG_DM_ETH=y CONFIG_BCMGENET=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_BRCMSTB=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y CONFIG_USB_DWC2=y CONFIG_USB_KEYBOARD=y CONFIG_USB_HOST_ETHER=y -- 2.7.4