From 4367d763698c5c7c2c0e540f0508e48b337c7d8a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 24 Mar 2023 10:47:44 +0100 Subject: [PATCH] arm64: dts: qcom: sc8280xp-x13s: enable alternate touchpad Enable both touchpad nodes in the devictree and let the HID driver determine which one is actually populated (by attempting to read from each i2c address). Ideally this would not be needed and the boot firmware should instead enable only the node for the populated touchpad, but this is unlikely to ever be realised for the X13s. Note that the pin configuration must currently be moved to the parent i2c-bus node even though only one of these nodes will ever be successfully probed on a specific device (e.g. to allow them to be probed in parallel). Signed-off-by: Johan Hovold Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230324094744.20448-1-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 0d1e49d..19d5ac6 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -603,7 +603,7 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&i2c21_default>; + pinctrl-0 = <&i2c21_default>, <&tpad_default>; status = "okay"; @@ -616,12 +616,7 @@ vdd-supply = <&vreg_misc_3p3>; vddl-supply = <&vreg_s10b>; - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; - wakeup-source; - - status = "disabled"; }; touchpad@2c { @@ -633,9 +628,6 @@ vdd-supply = <&vreg_misc_3p3>; vddl-supply = <&vreg_s10b>; - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; - wakeup-source; }; -- 2.7.4