From 434ef35095d6d9da013d4d8f3777ffd99cce699a Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 1 Oct 2021 18:15:31 +0300 Subject: [PATCH] selftests: net: mscc: ocelot: add a test for egress VLAN modification For this test we are exercising the VCAP ES0 block's ability to match on a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived from VID_A_VAL plus the classified VLAN. $eth3.200 is the generator port $eth0 is the bridged DUT port that receives $eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300 on egress via VCAP ES0 $eth2 is the port that receives from the DUT port $eth1 Since the egress rewriting happens outside the bridging service, VID 300 does not need to be in the bridge VLAN table of $eth1. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- .../drivers/net/ocelot/tc_flower_chains.sh | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh index 4711313..eaf8a04 100755 --- a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh +++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh @@ -285,6 +285,44 @@ test_vlan_ingress_modify() ip link set br0 type bridge vlan_filtering 0 } +test_vlan_egress_modify() +{ + printf "Testing egress VLAN modification.. " + + tc qdisc add dev $eth1 clsact + + ip link set br0 type bridge vlan_filtering 1 + bridge vlan add dev $eth0 vid 200 + bridge vlan add dev $eth1 vid 200 + + tc filter add dev $eth1 egress chain $(ES0) pref 3 \ + protocol 802.1Q flower skip_sw vlan_id 200 vlan_prio 0 \ + action vlan modify id 300 priority 7 + + tcpdump_start $eth2 + + $MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip + + sleep 1 + + tcpdump_stop + + if tcpdump_show | grep -q "$eth3_mac > $eth2_mac, .* vlan 300"; then + echo "OK" + else + echo "FAIL" + fi + + tcpdump_cleanup + + tc filter del dev $eth1 egress chain $(ES0) pref 3 + tc qdisc del dev $eth1 clsact + + bridge vlan del dev $eth0 vid 200 + bridge vlan del dev $eth1 vid 200 + ip link set br0 type bridge vlan_filtering 0 +} + test_skbedit_priority() { local num_pkts=100 @@ -310,6 +348,7 @@ ALL_TESTS=" test_vlan_pop test_vlan_push test_vlan_ingress_modify + test_vlan_egress_modify test_skbedit_priority " -- 2.7.4