From 427de05cf20f6b3bbcc79a6f3511fa13797fbdbe Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Wed, 19 Apr 2017 20:13:46 -0300 Subject: [PATCH] [media] au8522: rework setup of audio routing The original code was based on my reverse engineering of an I2C trace of the Windows driver. Now that I know what the registers actually do, restructure the code a bit, removing some unneeded register programming and fixing the sequencing of operations. This reduces the time it takes to change inputs from 1300ms down to 600ms (as measured by "time v4l2-ctl -i 0") Note this does not address outstanding issues related to the management of the module clocks and power control for the various blocks, which will be done in a separate patch. Signed-off-by: Devin Heitmueller Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/au8522_decoder.c | 29 ++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/media/dvb-frontends/au8522_decoder.c b/drivers/media/dvb-frontends/au8522_decoder.c index 7811717..281b5ac 100644 --- a/drivers/media/dvb-frontends/au8522_decoder.c +++ b/drivers/media/dvb-frontends/au8522_decoder.c @@ -418,28 +418,29 @@ static void set_audio_input(struct au8522_state *state) lpfilter_coef[i].reg_val[0]); } - /* Setup audio */ - au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00); - au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00); - au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00); - msleep(150); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x00); - msleep(10); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, - AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); - msleep(50); + /* Set the volume */ au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F); au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F); au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0xff); - msleep(80); - au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F); - au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F); + + /* Not sure what this does */ au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO); + + /* Setup the audio mode to stereo DBX */ au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x82); msleep(70); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09); + + /* Start the audio processing module */ + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x9d); + + /* Set the audio frequency to 48 KHz */ au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03); + + /* Set the I2S parameters (WS, LSB, mode, sample rate */ au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0xc2); + + /* Enable the I2S output */ + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09); } /* ----------------------------------------------------------------------- */ -- 2.7.4