From 41b4a7dfd391b5826492a89c702420b97dc02334 Mon Sep 17 00:00:00 2001 From: supriya karanth Date: Thu, 6 Dec 2012 11:12:48 +0530 Subject: [PATCH] usb: musb: set TXMAXP and AUTOSET for full speed bulk in device mode commit bb3a2ef2eb8cfaea335dcb3426350df7f3d48069 upstream. The TXMAXP register is not set correctly for full speed bulk case when the can_bulk_split() is used. Without this PIO transfers will not take place correctly The "mult" factor needs to be updated correctly for the can_bulk_split() case The AUTOSET bit in the TXCSR is not being set if the "mult" factor is greater than 0 for the High Bandwidth ISO case. But the "mult" factor is also greater than 0 in case of Full speed bulk transfers with the packet splitting in TXMAXP register Without the AUTOSET the DMA transfers will not progress in mode1 [ balbi@ti.com : add braces to both branches ] Signed-off-by: supriya karanth Signed-off-by: Praveena NADAHALLY Acked-by: Linus Walleij Signed-off-by: Felipe Balbi Cc: ian coolidge Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 95918da..49e3728 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -401,7 +401,19 @@ static void txstate(struct musb *musb, struct musb_request *req) csr |= (MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); - if (!musb_ep->hb_mult) + /* + * Enable Autoset according to table + * below + * bulk_split hb_mult Autoset_Enable + * 0 0 Yes(Normal) + * 0 >0 No(High BW ISO) + * 1 0 Yes(HS bulk) + * 1 >0 Yes(FS bulk) + */ + if (!musb_ep->hb_mult || + (musb_ep->hb_mult && + can_bulk_split(musb, + musb_ep->type))) csr |= MUSB_TXCSR_AUTOSET; } csr &= ~MUSB_TXCSR_P_UNDERRUN; @@ -1100,11 +1112,15 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set TXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - if (musb->double_buffer_not_ok) + if (musb->double_buffer_not_ok) { musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); - else + } else { + if (can_bulk_split(musb, musb_ep->type)) + musb_ep->hb_mult = (hw_ep->max_packet_sz_tx / + musb_ep->packet_sz) - 1; musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + } csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) -- 2.7.4