From 4050360f964694a3ac0c83badd1a441207c86889 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 29 Jun 2018 13:47:38 -0500 Subject: [PATCH] PCI: rcar: Shut the PHY down in failpath If anything fails past phy_init_fn() and the system is a Gen3 with a PHY, the PHY will be left on and inited. This is caused by the phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3() function, which starts the PHY, yet has no counterpart in the failpath. Add that counterpart. Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support") Signed-off-by: Marek Vasut Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Geert Uytterhoeven Acked-by: Simon Horman Cc: Geert Uytterhoeven Cc: Phil Edworthy Cc: Wolfram Sang --- drivers/pci/controller/pcie-rcar.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c index 874d75c..8b0d320 100644 --- a/drivers/pci/controller/pcie-rcar.c +++ b/drivers/pci/controller/pcie-rcar.c @@ -1165,7 +1165,7 @@ static int rcar_pcie_probe(struct platform_device *pdev) if (rcar_pcie_hw_init(pcie)) { dev_info(dev, "PCIe link down\n"); err = -ENODEV; - goto err_clk_disable; + goto err_phy_shutdown; } data = rcar_pci_read_reg(pcie, MACSR); @@ -1177,7 +1177,7 @@ static int rcar_pcie_probe(struct platform_device *pdev) dev_err(dev, "failed to enable MSI support: %d\n", err); - goto err_clk_disable; + goto err_phy_shutdown; } } @@ -1191,6 +1191,12 @@ err_msi_teardown: if (IS_ENABLED(CONFIG_PCI_MSI)) rcar_pcie_teardown_msi(pcie); +err_phy_shutdown: + if (pcie->phy) { + phy_power_off(pcie->phy); + phy_exit(pcie->phy); + } + err_clk_disable: clk_disable_unprepare(pcie->bus_clk); -- 2.7.4