From 3ee9bc12342cf546313d300808ff47d7dbb8e7db Mon Sep 17 00:00:00 2001 From: Brad Love Date: Tue, 6 Mar 2018 14:15:34 -0500 Subject: [PATCH] media: cx25840: Use subdev host data for PLL override The cx25840 driver currently configures 885, 887, and 888 using default divisors for each chip. This check to see if the cx23885 driver has passed the cx25840 a non-default clock rate for a specific chip. If a cx23885 board has left clk_freq at 0, the clock default values will be used to configure the PLLs. This patch only has effect on 888 boards who set clk_freq to 25M. Signed-off-by: Brad Love Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/cx25840/cx25840-core.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c index 98be63a..b168bf3 100644 --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -463,8 +463,13 @@ static void cx23885_initialize(struct i2c_client *client) { DEFINE_WAIT(wait); struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u32 clk_freq = 0; struct workqueue_struct *q; + /* cx23885 sets hostdata to clk_freq pointer */ + if (v4l2_get_subdev_hostdata(&state->sd)) + clk_freq = *((u32 *)v4l2_get_subdev_hostdata(&state->sd)); + /* * Come out of digital power down * The CX23888, at least, needs this, otherwise registers aside from @@ -500,8 +505,13 @@ static void cx23885_initialize(struct i2c_client *client) * 50.0 MHz * (0xb + 0xe8ba26/0x2000000)/4 = 5 * 28.636363 MHz * 572.73 MHz before post divide */ - /* HVR1850 or 50MHz xtal */ - cx25840_write(client, 0x2, 0x71); + if (clk_freq == 25000000) { + /* 888/ImpactVCBe or 25Mhz xtal */ + ; /* nothing to do */ + } else { + /* HVR1850 or 50MHz xtal */ + cx25840_write(client, 0x2, 0x71); + } cx25840_write4(client, 0x11c, 0x01d1744c); cx25840_write4(client, 0x118, 0x00000416); cx25840_write4(client, 0x404, 0x0010253e); @@ -544,9 +554,15 @@ static void cx23885_initialize(struct i2c_client *client) /* HVR1850 */ switch (state->id) { case CX23888_AV: - /* 888/HVR1250 specific */ - cx25840_write4(client, 0x10c, 0x13333333); - cx25840_write4(client, 0x108, 0x00000515); + if (clk_freq == 25000000) { + /* 888/ImpactVCBe or 25MHz xtal */ + cx25840_write4(client, 0x10c, 0x01b6db7b); + cx25840_write4(client, 0x108, 0x00000512); + } else { + /* 888/HVR1250 or 50MHz xtal */ + cx25840_write4(client, 0x10c, 0x13333333); + cx25840_write4(client, 0x108, 0x00000515); + } break; default: cx25840_write4(client, 0x10c, 0x002be2c9); @@ -576,7 +592,7 @@ static void cx23885_initialize(struct i2c_client *client) * 368.64 MHz before post divide * 122.88 MHz / 0xa = 12.288 MHz */ - /* HVR1850 or 50MHz xtal */ + /* HVR1850 or 50MHz xtal or 25MHz xtal */ cx25840_write4(client, 0x114, 0x017dbf48); cx25840_write4(client, 0x110, 0x000a030e); break; -- 2.7.4