From 3df034081021fa4b6967ce3364bc7d867ec1c870 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 1 Feb 2018 10:34:32 +0100 Subject: [PATCH] usb: gadget: udc: atmel: convert to use GPIO descriptors Use GPIO descriptors instead of relying on the old method. Include irq.h header since it is needed and was indirectly included through of_gpio.h. Reviewed-by: Linus Walleij Signed-off-by: Ludovic Desroches Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 51 ++++++++++++++------------------- drivers/usb/gadget/udc/atmel_usba_udc.h | 4 ++- 2 files changed, 25 insertions(+), 30 deletions(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 1c4d52d..27c1639 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -23,7 +23,8 @@ #include #include #include -#include +#include +#include #include "atmel_usba_udc.h" #define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \ @@ -415,8 +416,8 @@ static inline void usba_int_enb_set(struct usba_udc *udc, u32 val) static int vbus_is_present(struct usba_udc *udc) { - if (gpio_is_valid(udc->vbus_pin)) - return gpio_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted; + if (udc->vbus_pin) + return gpiod_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted; /* No Vbus detection: Assume always present */ return 1; @@ -1975,8 +1976,8 @@ static int atmel_usba_start(struct usb_gadget *gadget, mutex_lock(&udc->vbus_mutex); - if (gpio_is_valid(udc->vbus_pin)) - enable_irq(gpio_to_irq(udc->vbus_pin)); + if (udc->vbus_pin) + enable_irq(gpiod_to_irq(udc->vbus_pin)); /* If Vbus is present, enable the controller and wait for reset */ udc->vbus_prev = vbus_is_present(udc); @@ -1990,8 +1991,8 @@ static int atmel_usba_start(struct usb_gadget *gadget, return 0; err: - if (gpio_is_valid(udc->vbus_pin)) - disable_irq(gpio_to_irq(udc->vbus_pin)); + if (udc->vbus_pin) + disable_irq(gpiod_to_irq(udc->vbus_pin)); mutex_unlock(&udc->vbus_mutex); @@ -2006,8 +2007,8 @@ static int atmel_usba_stop(struct usb_gadget *gadget) { struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); - if (gpio_is_valid(udc->vbus_pin)) - disable_irq(gpio_to_irq(udc->vbus_pin)); + if (udc->vbus_pin) + disable_irq(gpiod_to_irq(udc->vbus_pin)); if (fifo_mode == 0) udc->configured_ep = 1; @@ -2054,7 +2055,6 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, { u32 val; const char *name; - enum of_gpio_flags flags; struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; struct device_node *pp; @@ -2074,9 +2074,9 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, udc->num_ep = 0; - udc->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0, - &flags); - udc->vbus_pin_inverted = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0; + udc->vbus_pin = devm_gpiod_get_optional(&pdev->dev, "atmel,vbus", + GPIOD_IN); + udc->vbus_pin_inverted = gpiod_is_active_low(udc->vbus_pin); if (fifo_mode == 0) { pp = NULL; @@ -2247,7 +2247,6 @@ static int usba_udc_probe(struct platform_device *pdev) udc->pdev = pdev; udc->pclk = pclk; udc->hclk = hclk; - udc->vbus_pin = -ENODEV; platform_set_drvdata(pdev, udc); @@ -2277,24 +2276,18 @@ static int usba_udc_probe(struct platform_device *pdev) } udc->irq = irq; - if (gpio_is_valid(udc->vbus_pin)) { - if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) { - irq_set_status_flags(gpio_to_irq(udc->vbus_pin), - IRQ_NOAUTOEN); - ret = devm_request_threaded_irq(&pdev->dev, - gpio_to_irq(udc->vbus_pin), NULL, + if (udc->vbus_pin) { + irq_set_status_flags(gpiod_to_irq(udc->vbus_pin), IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(&pdev->dev, + gpiod_to_irq(udc->vbus_pin), NULL, usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, "atmel_usba_udc", udc); if (ret) { - udc->vbus_pin = -ENODEV; + udc->vbus_pin = NULL; dev_warn(&udc->pdev->dev, "failed to request vbus irq; " "assuming always on\n"); } - } else { - /* gpio_request fail so use -EINVAL for gpio_is_valid */ - udc->vbus_pin = -EINVAL; - } } ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); @@ -2346,9 +2339,9 @@ static int usba_udc_suspend(struct device *dev) * Device may wake up. We stay clocked if we failed * to request vbus irq, assuming always on. */ - if (gpio_is_valid(udc->vbus_pin)) { + if (udc->vbus_pin) { usba_stop(udc); - enable_irq_wake(gpio_to_irq(udc->vbus_pin)); + enable_irq_wake(gpiod_to_irq(udc->vbus_pin)); } out: @@ -2364,8 +2357,8 @@ static int usba_udc_resume(struct device *dev) if (!udc->driver) return 0; - if (device_may_wakeup(dev) && gpio_is_valid(udc->vbus_pin)) - disable_irq_wake(gpio_to_irq(udc->vbus_pin)); + if (device_may_wakeup(dev) && udc->vbus_pin) + disable_irq_wake(gpiod_to_irq(udc->vbus_pin)); /* If Vbus is present, enable the controller and wait for reset */ mutex_lock(&udc->vbus_mutex); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index 860a00a..969ce8f 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -7,6 +7,8 @@ #ifndef __LINUX_USB_GADGET_USBA_UDC_H__ #define __LINUX_USB_GADGET_USBA_UDC_H__ +#include + /* USB register offsets */ #define USBA_CTRL 0x0000 #define USBA_FNUM 0x0004 @@ -323,7 +325,7 @@ struct usba_udc { struct platform_device *pdev; const struct usba_udc_errata *errata; int irq; - int vbus_pin; + struct gpio_desc *vbus_pin; int vbus_pin_inverted; int num_ep; int configured_ep; -- 2.7.4