From 3b2bf2bc18439cf73b14f5f009f0845d478a30c5 Mon Sep 17 00:00:00 2001
From: Priit Laes <plaes@plaes.org>
Date: Sun, 20 Dec 2015 20:35:55 +0200
Subject: [PATCH] staging: fbtft: Use standard MIPI DCS command defines for
 hx8340bn

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/fbtft/fb_hx8340bn.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/fbtft/fb_hx8340bn.c b/drivers/staging/fbtft/fb_hx8340bn.c
index e1ed177..ea680e5 100644
--- a/drivers/staging/fbtft/fb_hx8340bn.c
+++ b/drivers/staging/fbtft/fb_hx8340bn.c
@@ -25,6 +25,7 @@
 #include <linux/vmalloc.h>
 #include <linux/spi/spi.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -89,12 +90,12 @@ static int init_display(struct fbtft_par *par)
 	   This command is used to define the format of RGB picture data,
 	   which is to be transfer via the system and RGB interface. */
 	/* RGB interface: 16 Bit/Pixel	*/
-	write_reg(par, 0x3A, 0x05);
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);
 
 	/* Display on (29h)
 	   This command is used to recover from DISPLAY OFF mode.
 	   Output from the Frame Memory is enabled. */
-	write_reg(par, 0x29);
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 	mdelay(10);
 
 	return 0;
@@ -102,9 +103,9 @@ static int init_display(struct fbtft_par *par)
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	write_reg(par, FBTFT_CASET, 0x00, xs, 0x00, xe);
-	write_reg(par, FBTFT_RASET, 0x00, ys, 0x00, ye);
-	write_reg(par, FBTFT_RAMWR);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, xs, 0x00, xe);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, 0x00, ys, 0x00, ye);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 static int set_var(struct fbtft_par *par)
@@ -116,16 +117,19 @@ static int set_var(struct fbtft_par *par)
 #define MV BIT(5)
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, par->bgr << 3);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, par->bgr << 3);
 		break;
 	case 270:
-		write_reg(par, 0x36, MX | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MV | (par->bgr << 3));
 		break;
 	case 180:
-		write_reg(par, 0x36, MX | MY | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MY | (par->bgr << 3));
 		break;
 	case 90:
-		write_reg(par, 0x36, MY | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MY | MV | (par->bgr << 3));
 		break;
 	}
 
@@ -154,7 +158,8 @@ static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 		for (j = 0; j < par->gamma.num_values; j++)
 			CURVE(i, j) &= mask[i * par->gamma.num_values + j];
 
-	write_reg(par, 0x26, 1 << CURVE(1, 14)); /* Gamma Set (26h) */
+	/* Gamma Set (26h) */
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 1 << CURVE(1, 14));
 
 	if (CURVE(1, 14))
 		return 0; /* only GC0 can be customized */
-- 
2.7.4