From 3b12ca798e022192fb451e9e5ef1bb147f21c413 Mon Sep 17 00:00:00 2001 From: Eliav Farber Date: Thu, 8 Sep 2022 15:24:45 +0000 Subject: [PATCH] hwmon: (mr75203) add support for series 6 temperature equation MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The current equation used in code is aligned to series 5: T = G + H * (n / cal5 - 0.5) + J * F Where: G = 60, H = 200, cal5 = 4094, J = -0.1, F = frequency clock in MHz Series 6 has a slightly different equation: T = G + H * (n / cal5 - 0.5) and a different set of coefficients: G = 57.4, H = 249.4, cal5 = 4096 This change supports equation and coefficients for both series. (for series 6, J is set to 0). The series is determined according to “moortec,ts-series” property in the device tree. If absent, series 5 is assumed to be the default. Signed-off-by: Eliav Farber Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220908152449.35457-18-farbere@amazon.com Signed-off-by: Guenter Roeck --- drivers/hwmon/mr75203.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 62 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c index 5ee1666..ce00349 100644 --- a/drivers/hwmon/mr75203.c +++ b/drivers/hwmon/mr75203.c @@ -115,6 +115,15 @@ #define PVT_SERIES5_J_CONST -100 #define PVT_SERIES5_CAL5_CONST 4094 +/* Temperature coefficients for series 6 */ +#define PVT_SERIES6_H_CONST 249400 +#define PVT_SERIES6_G_CONST 57400 +#define PVT_SERIES6_J_CONST 0 +#define PVT_SERIES6_CAL5_CONST 4096 + +#define TEMPERATURE_SENSOR_SERIES_5 5 +#define TEMPERATURE_SENSOR_SERIES_6 6 + #define PRE_SCALER_X1 1 #define PRE_SCALER_X2 2 @@ -147,6 +156,13 @@ struct voltage_channels { u8 max; }; +struct temp_coeff { + u32 h; + u32 g; + u32 cal5; + s32 j; +}; + struct pvt_device { struct regmap *c_map; struct regmap *t_map; @@ -156,6 +172,7 @@ struct pvt_device { struct reset_control *rst; struct voltage_device *vd; struct voltage_channels vm_channels; + struct temp_coeff ts_coeff; u32 t_num; u32 p_num; u32 v_num; @@ -186,10 +203,12 @@ static long pvt_calc_temp(struct pvt_device *pvt, u32 nbs) * Convert the register value to degrees centigrade temperature: * T = G + H * (n / cal5 - 0.5) + J * F */ - s64 tmp = PVT_SERIES5_G_CONST + - PVT_SERIES5_H_CONST * (s64)nbs / PVT_SERIES5_CAL5_CONST - - PVT_SERIES5_H_CONST / 2 + - PVT_SERIES5_J_CONST * (s64)pvt->ip_freq / HZ_PER_MHZ; + struct temp_coeff *ts_coeff = &pvt->ts_coeff; + + s64 tmp = ts_coeff->g + + ts_coeff->h * (s64)nbs / ts_coeff->cal5 - + ts_coeff->h / 2 + + ts_coeff->j * (s64)pvt->ip_freq / HZ_PER_MHZ; return clamp_val(tmp, PVT_TEMP_MIN_mC, PVT_TEMP_MAX_mC); } @@ -658,6 +677,41 @@ out: return ret; } +static int pvt_set_temp_coeff(struct device *dev, struct pvt_device *pvt) +{ + struct temp_coeff *ts_coeff = &pvt->ts_coeff; + u32 series; + int ret; + + /* Incase ts-series property is not defined, use default 5. */ + ret = device_property_read_u32(dev, "moortec,ts-series", &series); + if (ret) + series = TEMPERATURE_SENSOR_SERIES_5; + + switch (series) { + case TEMPERATURE_SENSOR_SERIES_5: + ts_coeff->h = PVT_SERIES5_H_CONST; + ts_coeff->g = PVT_SERIES5_G_CONST; + ts_coeff->j = PVT_SERIES5_J_CONST; + ts_coeff->cal5 = PVT_SERIES5_CAL5_CONST; + break; + case TEMPERATURE_SENSOR_SERIES_6: + ts_coeff->h = PVT_SERIES6_H_CONST; + ts_coeff->g = PVT_SERIES6_G_CONST; + ts_coeff->j = PVT_SERIES6_J_CONST; + ts_coeff->cal5 = PVT_SERIES6_CAL5_CONST; + break; + default: + dev_err(dev, "invalid temperature sensor series (%u)\n", + series); + return -EINVAL; + } + + dev_dbg(dev, "temperature sensor series = %u\n", series); + + return 0; +} + static int mr75203_probe(struct platform_device *pdev) { u32 ts_num, vm_num, pd_num, ch_num, val, index, i; @@ -728,6 +782,10 @@ static int mr75203_probe(struct platform_device *pdev) if (ret) return ret; + ret = pvt_set_temp_coeff(dev, pvt); + if (ret) + return ret; + temp_config = devm_kcalloc(dev, ts_num + 1, sizeof(*temp_config), GFP_KERNEL); if (!temp_config) -- 2.7.4