From 3a8ee006fb19680c444993a99a4fe3a64dd40a39 Mon Sep 17 00:00:00 2001 From: Gary Benson Date: Thu, 19 Jun 2014 10:53:12 +0100 Subject: [PATCH] Create nat/i386-dregs.c This commit moves code to be shared from i386-{nat,low}.[ch] into a new file, nat/i386-dregs.c. gdb/ 2014-06-19 Gary Benson * nat/i386-dregs.c: New file. * Makefile.in (i386-dregs.o): New rule. * config/i386/cygwin.mh (NATDEPFILES): Add i386-dregs.o. * config/i386/cygwin64.mh (NATDEPFILES): Likewise. * config/i386/darwin.mh (NATDEPFILES): Likewise. * config/i386/fbsd.mh (NATDEPFILES): Likewise. * config/i386/fbsd64.mh (NATDEPFILES): Likewise. * config/i386/go32.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/i386/mingw.mh (NATDEPFILES): Likewise. * config/i386/mingw64.mh (NATDEPFILES): Likewise. * i386-nat.h (debug_hw_points): New declaration. * i386-nat.c (breakpoint.h): Remove include. (command.h): Likewise. (target.h): Likewise. (gdb_assert.h): Likewise. (debug_hw_points): Made nonstatic. (debug_printf): Now in i386-dregs.c. (TARGET_HAS_DR_LEN_8): Likewise. (DR_CONTROL_SHIFT): Likewise. (DR_CONTROL_SIZE): Likewise. (DR_RW_EXECUTE): Likewise. (DR_RW_WRITE): Likewise. (DR_RW_READ): Likewise. (DR_RW_IORW): Likewise. (DR_LEN_1): Likewise. (DR_LEN_2): Likewise. (DR_LEN_4): Likewise. (DR_LEN_8): Likewise. (DR_LOCAL_ENABLE_SHIFT): Likewise. (DR_GLOBAL_ENABLE_SHIFT): Likewise. (DR_ENABLE_SIZE): Likewise. (DR_LOCAL_SLOWDOWN): Likewise. (DR_GLOBAL_SLOWDOWN): Likewise. (DR_CONTROL_RESERVED): Likewise. (I386_DR_CONTROL_MASK): Likewise. (I386_DR_VACANT): Likewise. (I386_DR_LOCAL_ENABLE): Likewise. (I386_DR_GLOBAL_ENABLE): Likewise. (I386_DR_DISABLE): Likewise. (I386_DR_SET_RW_LEN): Likewise. (I386_DR_GET_RW_LEN): Likewise. (I386_DR_WATCH_HIT): Likewise. (i386_wp_op_t): Likewise. (i386_show_dr): Likewise. (i386_length_and_rw_bits): Likewise. (i386_insert_aligned_watchpoint): Likewise. (i386_remove_aligned_watchpoint): Likewise. (i386_handle_nonaligned_watchpoint): Likewise. (i386_update_inferior_debug_regs): Likewise. (i386_insert_watchpoint): Use i386_dr_insert_watchpoint. (i386_remove_watchpoint): Use i386_dr_remove_watchpoint. (i386_region_ok_for_watchpoint): Use i386_dr_region_ok_for_watchpoint. (i386_stopped_data_address): Use i386_dr_stopped_data_address. gdb/gdbserver/ 2014-06-19 Gary Benson * Makefile.in (i386-dregs.o): New rule. * configure.srv: Add i386-dregs.o to all targets using i386-low.o. * i386-low.c (target.h): Remove include. (TARGET_HAS_DR_LEN_8): Now in i386-dregs.c. (DR_CONTROL_SHIFT): Likewise. (DR_CONTROL_SIZE): Likewise. (DR_RW_EXECUTE): Likewise. (DR_RW_WRITE): Likewise. (DR_RW_READ): Likewise. (DR_RW_IORW): Likewise. (DR_LEN_1): Likewise. (DR_LEN_2): Likewise. (DR_LEN_4): Likewise. (DR_LEN_8): Likewise. (DR_LOCAL_ENABLE_SHIFT): Likewise. (DR_GLOBAL_ENABLE_SHIFT): Likewise. (DR_ENABLE_SIZE): Likewise. (DR_LOCAL_SLOWDOWN): Likewise. (DR_GLOBAL_SLOWDOWN): Likewise. (DR_CONTROL_RESERVED): Likewise. (I386_DR_CONTROL_MASK): Likewise. (I386_DR_VACANT): Likewise. (I386_DR_LOCAL_ENABLE): Likewise. (I386_DR_GLOBAL_ENABLE): Likewise. (I386_DR_DISABLE): Likewise. (I386_DR_SET_RW_LEN): Likewise. (I386_DR_GET_RW_LEN): Likewise. (I386_DR_WATCH_HIT): Likewise. (i386_wp_op_t): Likewise. (i386_show_dr): Likewise. (i386_length_and_rw_bits): Likewise. (i386_insert_aligned_watchpoint): Likewise. (i386_remove_aligned_watchpoint): Likewise. (i386_handle_nonaligned_watchpoint): Likewise. i386_update_inferior_debug_regs(): Likewise. (i386_dr_insert_watchpoint): Likewise. (i386_dr_remove_watchpoint): Likewise. (i386_dr_region_ok_for_watchpoint): Likewise. (i386_dr_stopped_data_address): Likewise. (i386_dr_stopped_by_watchpoint): Likewise. --- gdb/ChangeLog | 59 +++++ gdb/Makefile.in | 4 + gdb/config/i386/cygwin.mh | 2 +- gdb/config/i386/cygwin64.mh | 2 +- gdb/config/i386/darwin.mh | 2 +- gdb/config/i386/fbsd.mh | 2 +- gdb/config/i386/fbsd64.mh | 2 +- gdb/config/i386/go32.mh | 2 +- gdb/config/i386/linux.mh | 2 +- gdb/config/i386/linux64.mh | 2 +- gdb/config/i386/mingw.mh | 2 +- gdb/config/i386/mingw64.mh | 2 +- gdb/gdbserver/ChangeLog | 43 +++ gdb/gdbserver/Makefile.in | 4 + gdb/gdbserver/configure.srv | 14 +- gdb/gdbserver/i386-low.c | 587 ----------------------------------------- gdb/i386-nat.c | 534 +------------------------------------- gdb/i386-nat.h | 3 + gdb/nat/i386-dregs.c | 617 ++++++++++++++++++++++++++++++++++++++++++++ 19 files changed, 752 insertions(+), 1133 deletions(-) create mode 100644 gdb/nat/i386-dregs.c diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 0ffb849..1d1dcad 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5 +1,64 @@ 2014-06-19 Gary Benson + * nat/i386-dregs.c: New file. + * Makefile.in (i386-dregs.o): New rule. + * config/i386/cygwin.mh (NATDEPFILES): Add i386-dregs.o. + * config/i386/cygwin64.mh (NATDEPFILES): Likewise. + * config/i386/darwin.mh (NATDEPFILES): Likewise. + * config/i386/fbsd.mh (NATDEPFILES): Likewise. + * config/i386/fbsd64.mh (NATDEPFILES): Likewise. + * config/i386/go32.mh (NATDEPFILES): Likewise. + * config/i386/linux.mh (NATDEPFILES): Likewise. + * config/i386/linux64.mh (NATDEPFILES): Likewise. + * config/i386/mingw.mh (NATDEPFILES): Likewise. + * config/i386/mingw64.mh (NATDEPFILES): Likewise. + * i386-nat.h (debug_hw_points): New declaration. + * i386-nat.c (breakpoint.h): Remove include. + (command.h): Likewise. + (target.h): Likewise. + (gdb_assert.h): Likewise. + (debug_hw_points): Made nonstatic. + (debug_printf): Now in i386-dregs.c. + (TARGET_HAS_DR_LEN_8): Likewise. + (DR_CONTROL_SHIFT): Likewise. + (DR_CONTROL_SIZE): Likewise. + (DR_RW_EXECUTE): Likewise. + (DR_RW_WRITE): Likewise. + (DR_RW_READ): Likewise. + (DR_RW_IORW): Likewise. + (DR_LEN_1): Likewise. + (DR_LEN_2): Likewise. + (DR_LEN_4): Likewise. + (DR_LEN_8): Likewise. + (DR_LOCAL_ENABLE_SHIFT): Likewise. + (DR_GLOBAL_ENABLE_SHIFT): Likewise. + (DR_ENABLE_SIZE): Likewise. + (DR_LOCAL_SLOWDOWN): Likewise. + (DR_GLOBAL_SLOWDOWN): Likewise. + (DR_CONTROL_RESERVED): Likewise. + (I386_DR_CONTROL_MASK): Likewise. + (I386_DR_VACANT): Likewise. + (I386_DR_LOCAL_ENABLE): Likewise. + (I386_DR_GLOBAL_ENABLE): Likewise. + (I386_DR_DISABLE): Likewise. + (I386_DR_SET_RW_LEN): Likewise. + (I386_DR_GET_RW_LEN): Likewise. + (I386_DR_WATCH_HIT): Likewise. + (i386_wp_op_t): Likewise. + (i386_show_dr): Likewise. + (i386_length_and_rw_bits): Likewise. + (i386_insert_aligned_watchpoint): Likewise. + (i386_remove_aligned_watchpoint): Likewise. + (i386_handle_nonaligned_watchpoint): Likewise. + (i386_update_inferior_debug_regs): Likewise. + (i386_insert_watchpoint): Use i386_dr_insert_watchpoint. + (i386_remove_watchpoint): Use i386_dr_remove_watchpoint. + (i386_region_ok_for_watchpoint): + Use i386_dr_region_ok_for_watchpoint. + (i386_stopped_data_address): Use i386_dr_stopped_data_address. + +2014-06-19 Gary Benson + * i386-nat.c (i386_insert_hw_breakpoint): Use i386_insert_watchpoint. (i386_remove_hw_breakpoint): Use i386_remove_watchpoint. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index d17774a..f4dd406 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -2178,6 +2178,10 @@ waitstatus.o: ${srcdir}/target/waitstatus.c # Need to explicitly specify the compile rule as make will do nothing # or try to compile the object file into the sub-directory. +i386-dregs.o: ${srcdir}/nat/i386-dregs.c + $(COMPILE) $(srcdir)/nat/i386-dregs.c + $(POSTCOMPILE) + linux-waitpid.o: ${srcdir}/nat/linux-waitpid.c $(COMPILE) $(srcdir)/nat/linux-waitpid.c $(POSTCOMPILE) diff --git a/gdb/config/i386/cygwin.mh b/gdb/config/i386/cygwin.mh index b704158..07f06f2 100644 --- a/gdb/config/i386/cygwin.mh +++ b/gdb/config/i386/cygwin.mh @@ -1,3 +1,3 @@ MH_CFLAGS= -NATDEPFILES= i386-nat.o windows-nat.o i386-windows-nat.o +NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o i386-windows-nat.o XM_CLIBS= diff --git a/gdb/config/i386/cygwin64.mh b/gdb/config/i386/cygwin64.mh index 1c21fc6..5ce3095 100644 --- a/gdb/config/i386/cygwin64.mh +++ b/gdb/config/i386/cygwin64.mh @@ -17,4 +17,4 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . */ -NATDEPFILES= i386-nat.o windows-nat.o amd64-windows-nat.o +NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o amd64-windows-nat.o diff --git a/gdb/config/i386/darwin.mh b/gdb/config/i386/darwin.mh index 190d56c..bd4d57e 100644 --- a/gdb/config/i386/darwin.mh +++ b/gdb/config/i386/darwin.mh @@ -1,4 +1,4 @@ # Host: IA86 running Darwin NATDEPFILES = fork-child.o darwin-nat.o \ - i386-darwin-nat.o i386-nat.o amd64-nat.o darwin-nat-info.o + i386-darwin-nat.o i386-nat.o i386-dregs.o amd64-nat.o darwin-nat-info.o diff --git a/gdb/config/i386/fbsd.mh b/gdb/config/i386/fbsd.mh index 2c9cd9a..7aa6a69 100644 --- a/gdb/config/i386/fbsd.mh +++ b/gdb/config/i386/fbsd.mh @@ -1,6 +1,6 @@ # Host: FreeBSD/i386 NATDEPFILES= fork-child.o inf-ptrace.o \ - fbsd-nat.o i386-nat.o i386bsd-nat.o i386fbsd-nat.o \ + fbsd-nat.o i386-nat.o i386-dregs.o i386bsd-nat.o i386fbsd-nat.o \ bsd-kvm.o NAT_FILE= nm-fbsd.h HAVE_NATIVE_GCORE_HOST = 1 diff --git a/gdb/config/i386/fbsd64.mh b/gdb/config/i386/fbsd64.mh index c719a17..c37f460 100644 --- a/gdb/config/i386/fbsd64.mh +++ b/gdb/config/i386/fbsd64.mh @@ -1,7 +1,7 @@ # Host: FreeBSD/amd64 NATDEPFILES= fork-child.o inf-ptrace.o \ fbsd-nat.o amd64-nat.o amd64bsd-nat.o amd64fbsd-nat.o \ - bsd-kvm.o i386-nat.o + bsd-kvm.o i386-nat.o i386-dregs.o HAVE_NATIVE_GCORE_HOST = 1 LOADLIBES= -lkvm diff --git a/gdb/config/i386/go32.mh b/gdb/config/i386/go32.mh index 9cebf01..1b8ce86 100644 --- a/gdb/config/i386/go32.mh +++ b/gdb/config/i386/go32.mh @@ -3,7 +3,7 @@ # We include several header files from config/djgpp MH_CFLAGS= -I$(srcdir)/config/djgpp -NATDEPFILES= go32-nat.o i386-nat.o +NATDEPFILES= go32-nat.o i386-nat.o i386-dregs.o HOST_IPC= CC= gcc diff --git a/gdb/config/i386/linux.mh b/gdb/config/i386/linux.mh index 10a2584..be18dcf 100644 --- a/gdb/config/i386/linux.mh +++ b/gdb/config/i386/linux.mh @@ -2,7 +2,7 @@ NAT_FILE= config/nm-linux.h NATDEPFILES= inf-ptrace.o fork-child.o \ - i386-nat.o i386-linux-nat.o \ + i386-nat.o i386-dregs.o i386-linux-nat.o \ proc-service.o linux-thread-db.o \ linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \ linux-btrace.o linux-waitpid.o diff --git a/gdb/config/i386/linux64.mh b/gdb/config/i386/linux64.mh index 686c363..3126b75 100644 --- a/gdb/config/i386/linux64.mh +++ b/gdb/config/i386/linux64.mh @@ -1,6 +1,6 @@ # Host: GNU/Linux x86-64 NATDEPFILES= inf-ptrace.o fork-child.o \ - i386-nat.o amd64-nat.o amd64-linux-nat.o \ + i386-nat.o i386-dregs.o amd64-nat.o amd64-linux-nat.o \ linux-nat.o linux-osdata.o \ proc-service.o linux-thread-db.o linux-fork.o \ linux-procfs.o linux-ptrace.o linux-btrace.o \ diff --git a/gdb/config/i386/mingw.mh b/gdb/config/i386/mingw.mh index b704158..07f06f2 100644 --- a/gdb/config/i386/mingw.mh +++ b/gdb/config/i386/mingw.mh @@ -1,3 +1,3 @@ MH_CFLAGS= -NATDEPFILES= i386-nat.o windows-nat.o i386-windows-nat.o +NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o i386-windows-nat.o XM_CLIBS= diff --git a/gdb/config/i386/mingw64.mh b/gdb/config/i386/mingw64.mh index ba6fd9f..740f508 100644 --- a/gdb/config/i386/mingw64.mh +++ b/gdb/config/i386/mingw64.mh @@ -1 +1 @@ -NATDEPFILES= i386-nat.o windows-nat.o amd64-windows-nat.o +NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o amd64-windows-nat.o diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog index 4f5f1cd..dda84f9 100644 --- a/gdb/gdbserver/ChangeLog +++ b/gdb/gdbserver/ChangeLog @@ -1,5 +1,48 @@ 2014-06-19 Gary Benson + * Makefile.in (i386-dregs.o): New rule. + * configure.srv: Add i386-dregs.o to all targets using i386-low.o. + * i386-low.c (target.h): Remove include. + (TARGET_HAS_DR_LEN_8): Now in i386-dregs.c. + (DR_CONTROL_SHIFT): Likewise. + (DR_CONTROL_SIZE): Likewise. + (DR_RW_EXECUTE): Likewise. + (DR_RW_WRITE): Likewise. + (DR_RW_READ): Likewise. + (DR_RW_IORW): Likewise. + (DR_LEN_1): Likewise. + (DR_LEN_2): Likewise. + (DR_LEN_4): Likewise. + (DR_LEN_8): Likewise. + (DR_LOCAL_ENABLE_SHIFT): Likewise. + (DR_GLOBAL_ENABLE_SHIFT): Likewise. + (DR_ENABLE_SIZE): Likewise. + (DR_LOCAL_SLOWDOWN): Likewise. + (DR_GLOBAL_SLOWDOWN): Likewise. + (DR_CONTROL_RESERVED): Likewise. + (I386_DR_CONTROL_MASK): Likewise. + (I386_DR_VACANT): Likewise. + (I386_DR_LOCAL_ENABLE): Likewise. + (I386_DR_GLOBAL_ENABLE): Likewise. + (I386_DR_DISABLE): Likewise. + (I386_DR_SET_RW_LEN): Likewise. + (I386_DR_GET_RW_LEN): Likewise. + (I386_DR_WATCH_HIT): Likewise. + (i386_wp_op_t): Likewise. + (i386_show_dr): Likewise. + (i386_length_and_rw_bits): Likewise. + (i386_insert_aligned_watchpoint): Likewise. + (i386_remove_aligned_watchpoint): Likewise. + (i386_handle_nonaligned_watchpoint): Likewise. + i386_update_inferior_debug_regs(): Likewise. + (i386_dr_insert_watchpoint): Likewise. + (i386_dr_remove_watchpoint): Likewise. + (i386_dr_region_ok_for_watchpoint): Likewise. + (i386_dr_stopped_data_address): Likewise. + (i386_dr_stopped_by_watchpoint): Likewise. + +2014-06-19 Gary Benson + * i386-low.c (i386_dr_show): Renamed to i386_show_dr and made static. All uses updated. (i386_dr_length_and_rw_bits): Renamed to diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in index cbf36ab..76d8965 100644 --- a/gdb/gdbserver/Makefile.in +++ b/gdb/gdbserver/Makefile.in @@ -551,6 +551,10 @@ mips-linux-watch.o: ../common/mips-linux-watch.c # Native object files rules from ../nat +i386-dregs.o: ../nat/i386-dregs.c + $(COMPILE) $< + $(POSTCOMPILE) + linux-waitpid.o: ../nat/linux-waitpid.c $(COMPILE) $< $(POSTCOMPILE) diff --git a/gdb/gdbserver/configure.srv b/gdb/gdbserver/configure.srv index 097c7b4..8ff9c28 100644 --- a/gdb/gdbserver/configure.srv +++ b/gdb/gdbserver/configure.srv @@ -99,7 +99,7 @@ case "${target}" in srv_linux_thread_db=yes ;; i[34567]86-*-cygwin*) srv_regobj="$srv_i386_regobj" - srv_tgtobj="i386-low.o win32-low.o win32-i386-low.o" + srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o" srv_xmlfiles="$srv_i386_xmlfiles" ;; i[34567]86-*-linux*) srv_regobj="$srv_i386_linux_regobj" @@ -108,7 +108,7 @@ case "${target}" in srv_regobj="$srv_regobj $srv_amd64_linux_regobj" srv_xmlfiles="${srv_xmlfiles} $srv_amd64_linux_xmlfiles" fi - srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i387-fp.o" + srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i386-dregs.o i387-fp.o" srv_tgtobj="${srv_tgtobj} linux-btrace.o" srv_linux_usrregs=yes srv_linux_regsets=yes @@ -125,7 +125,7 @@ case "${target}" in ;; i[34567]86-*-mingw32ce*) srv_regobj="$srv_i386_regobj" - srv_tgtobj="i386-low.o win32-low.o win32-i386-low.o" + srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o" srv_tgtobj="${srv_tgtobj} wincecompat.o" srv_xmlfiles="$srv_i386_xmlfiles" # hostio_last_error implementation is in win32-low.c @@ -134,7 +134,7 @@ case "${target}" in srv_mingwce=yes ;; i[34567]86-*-mingw*) srv_regobj="$srv_i386_regobj" - srv_tgtobj="i386-low.o win32-low.o win32-i386-low.o" + srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o" srv_xmlfiles="$srv_i386_xmlfiles" srv_mingw=yes ;; @@ -315,7 +315,7 @@ case "${target}" in srv_linux_thread_db=yes ;; x86_64-*-linux*) srv_regobj="$srv_amd64_linux_regobj $srv_i386_linux_regobj" - srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i387-fp.o" + srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i386-dregs.o i387-fp.o" srv_tgtobj="${srv_tgtobj} linux-btrace.o" srv_xmlfiles="$srv_i386_linux_xmlfiles $srv_amd64_linux_xmlfiles" srv_linux_usrregs=yes # This is for i386 progs. @@ -325,12 +325,12 @@ case "${target}" in ipa_obj="${ipa_amd64_linux_regobj} linux-amd64-ipa.o" ;; x86_64-*-mingw*) srv_regobj="$srv_amd64_regobj" - srv_tgtobj="i386-low.o i387-fp.o win32-low.o win32-i386-low.o" + srv_tgtobj="i386-low.o i386-dregs.o i387-fp.o win32-low.o win32-i386-low.o" srv_xmlfiles="$srv_i386_xmlfiles $srv_amd64_xmlfiles" srv_mingw=yes ;; x86_64-*-cygwin*) srv_regobj="$srv_amd64_regobj" - srv_tgtobj="i386-low.o i387-fp.o win32-low.o win32-i386-low.o" + srv_tgtobj="i386-low.o i386-dregs.o i387-fp.o win32-low.o win32-i386-low.o" srv_xmlfiles="$srv_i386_xmlfiles" ;; diff --git a/gdb/gdbserver/i386-low.c b/gdb/gdbserver/i386-low.c index c913c53..845c3b0 100644 --- a/gdb/gdbserver/i386-low.c +++ b/gdb/gdbserver/i386-low.c @@ -18,132 +18,8 @@ along with this program. If not, see . */ #include "server.h" -#include "target.h" #include "i386-low.h" -/* Support for hardware watchpoints and breakpoints using the i386 - debug registers. - - This provides several functions for inserting and removing - hardware-assisted breakpoints and watchpoints, testing if one or - more of the watchpoints triggered and at what address, checking - whether a given region can be watched, etc. - - The functions below implement debug registers sharing by reference - counts, and allow to watch regions up to 16 bytes long. */ - -/* Support for 8-byte wide hw watchpoints. */ -#define TARGET_HAS_DR_LEN_8 (i386_get_debug_register_length () == 8) - -/* DR7 Debug Control register fields. */ - -/* How many bits to skip in DR7 to get to R/W and LEN fields. */ -#define DR_CONTROL_SHIFT 16 -/* How many bits in DR7 per R/W and LEN field for each watchpoint. */ -#define DR_CONTROL_SIZE 4 - -/* Watchpoint/breakpoint read/write fields in DR7. */ -#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */ -#define DR_RW_WRITE (0x1) /* Break on data writes. */ -#define DR_RW_READ (0x3) /* Break on data reads or writes. */ - -/* This is here for completeness. No platform supports this - functionality yet (as of March 2001). Note that the DE flag in the - CR4 register needs to be set to support this. */ -#ifndef DR_RW_IORW -#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */ -#endif - -/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift - is so we could OR this with the read/write field defined above. */ -#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */ -#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */ -#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */ -#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */ - -/* Local and Global Enable flags in DR7. - - When the Local Enable flag is set, the breakpoint/watchpoint is - enabled only for the current task; the processor automatically - clears this flag on every task switch. When the Global Enable flag - is set, the breakpoint/watchpoint is enabled for all tasks; the - processor never clears this flag. - - Currently, all watchpoint are locally enabled. If you need to - enable them globally, read the comment which pertains to this in - i386_insert_aligned_watchpoint below. */ -#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */ -#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */ -#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */ - -/* Local and global exact breakpoint enable flags (a.k.a. slowdown - flags). These are only required on i386, to allow detection of the - exact instruction which caused a watchpoint to break; i486 and - later processors do that automatically. We set these flags for - backwards compatibility. */ -#define DR_LOCAL_SLOWDOWN (0x100) -#define DR_GLOBAL_SLOWDOWN (0x200) - -/* Fields reserved by Intel. This includes the GD (General Detect - Enable) flag, which causes a debug exception to be generated when a - MOV instruction accesses one of the debug registers. - - FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */ -#define DR_CONTROL_RESERVED (0xFC00) - -/* Auxiliary helper macros. */ - -/* A value that masks all fields in DR7 that are reserved by Intel. */ -#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED) - -/* The I'th debug register is vacant if its Local and Global Enable - bits are reset in the Debug Control register. */ -#define I386_DR_VACANT(state, i) \ - (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0) - -/* Locally enable the break/watchpoint in the I'th debug register. */ -#define I386_DR_LOCAL_ENABLE(state, i) \ - do { \ - (state)->dr_control_mirror |= \ - (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \ - } while (0) - -/* Globally enable the break/watchpoint in the I'th debug register. */ -#define I386_DR_GLOBAL_ENABLE(state, i) \ - do { \ - (state)->dr_control_mirror |= \ - (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \ - } while (0) - -/* Disable the break/watchpoint in the I'th debug register. */ -#define I386_DR_DISABLE(state, i) \ - do { \ - (state)->dr_control_mirror &= \ - ~(3 << (DR_ENABLE_SIZE * (i))); \ - } while (0) - -/* Set in DR7 the RW and LEN fields for the I'th debug register. */ -#define I386_DR_SET_RW_LEN(state, i, rwlen) \ - do { \ - (state)->dr_control_mirror &= \ - ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \ - (state)->dr_control_mirror |= \ - ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \ - } while (0) - -/* Get from DR7 the RW and LEN fields for the I'th debug register. */ -#define I386_DR_GET_RW_LEN(dr7, i) \ - (((dr7) \ - >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f) - -/* Did the watchpoint whose address is in the I'th register break? */ -#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i))) - -/* Types of operations supported by i386_handle_nonaligned_watchpoint. */ -typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t; - -/* Implementation. */ - /* Clear the reference counts and forget everything we knew about the debug registers. */ @@ -160,466 +36,3 @@ i386_low_init_dregs (struct i386_debug_reg_state *state) state->dr_control_mirror = 0; state->dr_status_mirror = 0; } - -/* Print the values of the mirrored debug registers. */ - -static void -i386_show_dr (struct i386_debug_reg_state *state, - const char *func, CORE_ADDR addr, - int len, enum target_hw_bp_type type) -{ - int i; - - debug_printf ("%s", func); - if (addr || len) - debug_printf (" (addr=%s, len=%d, type=%s)", - phex (addr, 8), len, - type == hw_write ? "data-write" - : (type == hw_read ? "data-read" - : (type == hw_access ? "data-read/write" - : (type == hw_execute ? "instruction-execute" - /* FIXME: if/when I/O read/write - watchpoints are supported, add them - here. */ - : "??unknown??")))); - debug_printf (":\n"); - debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n", - phex (state->dr_control_mirror, 8), - phex (state->dr_status_mirror, 8)); - ALL_DEBUG_REGISTERS (i) - { - debug_printf ("\ -\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n", - i, phex (state->dr_mirror[i], - i386_get_debug_register_length ()), - state->dr_ref_count[i], - i + 1, phex (state->dr_mirror[i + 1], - i386_get_debug_register_length ()), - state->dr_ref_count[i + 1]); - i++; - } -} - -/* Return the value of a 4-bit field for DR7 suitable for watching a - region of LEN bytes for accesses of type TYPE. LEN is assumed to - have the value of 1, 2, or 4. */ - -static unsigned -i386_length_and_rw_bits (int len, enum target_hw_bp_type type) -{ - unsigned rw; - - switch (type) - { - case hw_execute: - rw = DR_RW_EXECUTE; - break; - case hw_write: - rw = DR_RW_WRITE; - break; - case hw_read: - internal_error (__FILE__, __LINE__, - _("The i386 doesn't support " - "data-read watchpoints.\n")); - case hw_access: - rw = DR_RW_READ; - break; -#if 0 - /* Not yet supported. */ - case hw_io_access: - rw = DR_RW_IORW; - break; -#endif - default: - internal_error (__FILE__, __LINE__, _("\ -Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"), - (int) type); - } - - switch (len) - { - case 1: - return (DR_LEN_1 | rw); - case 2: - return (DR_LEN_2 | rw); - case 4: - return (DR_LEN_4 | rw); - case 8: - if (TARGET_HAS_DR_LEN_8) - return (DR_LEN_8 | rw); - /* ELSE FALL THROUGH */ - default: - internal_error (__FILE__, __LINE__, _("\ -Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len); - } -} - -/* Insert a watchpoint at address ADDR, which is assumed to be aligned - according to the length of the region to watch. LEN_RW_BITS is the - value of the bits from DR7 which describes the length and access - type of the region to be watched by this watchpoint. Return 0 on - success, -1 on failure. */ - -static int -i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state, - CORE_ADDR addr, unsigned len_rw_bits) -{ - int i; - - if (!i386_dr_low_can_set_addr () || !i386_dr_low_can_set_control ()) - return -1; - - /* First, look for an occupied debug register with the same address - and the same RW and LEN definitions. If we find one, we can - reuse it for this watchpoint as well (and save a register). */ - ALL_DEBUG_REGISTERS (i) - { - if (!I386_DR_VACANT (state, i) - && state->dr_mirror[i] == addr - && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits) - { - state->dr_ref_count[i]++; - return 0; - } - } - - /* Next, look for a vacant debug register. */ - ALL_DEBUG_REGISTERS (i) - { - if (I386_DR_VACANT (state, i)) - break; - } - - /* No more debug registers! */ - if (i >= DR_NADDR) - return -1; - - /* Now set up the register I to watch our region. */ - - /* Record the info in our local mirrored array. */ - state->dr_mirror[i] = addr; - state->dr_ref_count[i] = 1; - I386_DR_SET_RW_LEN (state, i, len_rw_bits); - /* Note: we only enable the watchpoint locally, i.e. in the current - task. Currently, no i386 target allows or supports global - watchpoints; however, if any target would want that in the - future, GDB should probably provide a command to control whether - to enable watchpoints globally or locally, and the code below - should use global or local enable and slow-down flags as - appropriate. */ - I386_DR_LOCAL_ENABLE (state, i); - state->dr_control_mirror |= DR_LOCAL_SLOWDOWN; - state->dr_control_mirror &= I386_DR_CONTROL_MASK; - - return 0; -} - -/* Remove a watchpoint at address ADDR, which is assumed to be aligned - according to the length of the region to watch. LEN_RW_BITS is the - value of the bits from DR7 which describes the length and access - type of the region watched by this watchpoint. Return 0 on - success, -1 on failure. */ - -static int -i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state, - CORE_ADDR addr, unsigned len_rw_bits) -{ - int i, retval = -1; - - ALL_DEBUG_REGISTERS (i) - { - if (!I386_DR_VACANT (state, i) - && state->dr_mirror[i] == addr - && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits) - { - if (--state->dr_ref_count[i] == 0) /* No longer in use? */ - { - /* Reset our mirror. */ - state->dr_mirror[i] = 0; - I386_DR_DISABLE (state, i); - } - retval = 0; - } - } - - return retval; -} - -/* Insert or remove a (possibly non-aligned) watchpoint, or count the - number of debug registers required to watch a region at address - ADDR whose length is LEN for accesses of type TYPE. Return 0 on - successful insertion or removal, a positive number when queried - about the number of registers, or -1 on failure. If WHAT is not a - valid value, bombs through internal_error. */ - -static int -i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state, - i386_wp_op_t what, CORE_ADDR addr, int len, - enum target_hw_bp_type type) -{ - int retval = 0; - int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4; - - static const int size_try_array[8][8] = - { - {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */ - {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */ - {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */ - {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */ - {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */ - {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */ - {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */ - {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */ - }; - - while (len > 0) - { - int align = addr % max_wp_len; - /* Four (eight on AMD64) is the maximum length a debug register - can watch. */ - int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1); - int size = size_try_array[try][align]; - - if (what == WP_COUNT) - { - /* size_try_array[] is defined such that each iteration - through the loop is guaranteed to produce an address and a - size that can be watched with a single debug register. - Thus, for counting the registers required to watch a - region, we simply need to increment the count on each - iteration. */ - retval++; - } - else - { - unsigned len_rw = i386_length_and_rw_bits (size, type); - - if (what == WP_INSERT) - retval = i386_insert_aligned_watchpoint (state, addr, len_rw); - else if (what == WP_REMOVE) - retval = i386_remove_aligned_watchpoint (state, addr, len_rw); - else - internal_error (__FILE__, __LINE__, _("\ -Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"), - (int) what); - if (retval) - break; - } - - addr += size; - len -= size; - } - - return retval; -} - -/* Update the inferior debug registers state, in STATE, with the - new debug registers state, in NEW_STATE. */ - -static void -i386_update_inferior_debug_regs (struct i386_debug_reg_state *state, - struct i386_debug_reg_state *new_state) -{ - int i; - - ALL_DEBUG_REGISTERS (i) - { - if (I386_DR_VACANT (new_state, i) != I386_DR_VACANT (state, i)) - i386_dr_low_set_addr (new_state, i); - else - gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]); - } - - if (new_state->dr_control_mirror != state->dr_control_mirror) - i386_dr_low_set_control (new_state); - - *state = *new_state; -} - -/* Insert a watchpoint to watch a memory region which starts at - address ADDR and whose length is LEN bytes. Watch memory accesses - of the type TYPE. Return 0 on success, -1 on failure. */ - -int -i386_dr_insert_watchpoint (struct i386_debug_reg_state *state, - enum target_hw_bp_type type, - CORE_ADDR addr, int len) -{ - int retval; - /* Work on a local copy of the debug registers, and on success, - commit the change back to the inferior. */ - struct i386_debug_reg_state local_state = *state; - - if (type == hw_read) - return 1; /* unsupported */ - - if (((len != 1 && len != 2 && len != 4) - && !(TARGET_HAS_DR_LEN_8 && len == 8)) - || addr % len != 0) - { - retval = i386_handle_nonaligned_watchpoint (&local_state, - WP_INSERT, - addr, len, type); - } - else - { - unsigned len_rw = i386_length_and_rw_bits (len, type); - - retval = i386_insert_aligned_watchpoint (&local_state, - addr, len_rw); - } - - if (retval == 0) - i386_update_inferior_debug_regs (state, &local_state); - - if (debug_hw_points) - i386_show_dr (state, "insert_watchpoint", addr, len, type); - - return retval; -} - -/* Remove a watchpoint that watched the memory region which starts at - address ADDR, whose length is LEN bytes, and for accesses of the - type TYPE. Return 0 on success, -1 on failure. */ - -int -i386_dr_remove_watchpoint (struct i386_debug_reg_state *state, - enum target_hw_bp_type type, - CORE_ADDR addr, int len) -{ - int retval; - /* Work on a local copy of the debug registers, and on success, - commit the change back to the inferior. */ - struct i386_debug_reg_state local_state = *state; - - if (((len != 1 && len != 2 && len != 4) - && !(TARGET_HAS_DR_LEN_8 && len == 8)) - || addr % len != 0) - { - retval = i386_handle_nonaligned_watchpoint (&local_state, - WP_REMOVE, - addr, len, type); - } - else - { - unsigned len_rw = i386_length_and_rw_bits (len, type); - - retval = i386_remove_aligned_watchpoint (&local_state, - addr, len_rw); - } - - if (retval == 0) - i386_update_inferior_debug_regs (state, &local_state); - - if (debug_hw_points) - i386_show_dr (state, "remove_watchpoint", addr, len, type); - - return retval; -} - -/* Return non-zero if we can watch a memory region that starts at - address ADDR and whose length is LEN bytes. */ - -int -i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state, - CORE_ADDR addr, int len) -{ - int nregs; - - /* Compute how many aligned watchpoints we would need to cover this - region. */ - nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT, - addr, len, hw_write); - return nregs <= DR_NADDR ? 1 : 0; -} - -/* If the inferior has some break/watchpoint that triggered, set the - address associated with that break/watchpoint and return non-zero. - Otherwise, return zero. */ - -int -i386_dr_stopped_data_address (struct i386_debug_reg_state *state, - CORE_ADDR *addr_p) -{ - CORE_ADDR addr = 0; - int i; - int rc = 0; - /* The current thread's DR_STATUS. We always need to read this to - check whether some watchpoint caused the trap. */ - unsigned status; - /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a - data breakpoint trap. Only fetch it when necessary, to avoid an - unnecessary extra syscall when no watchpoint triggered. */ - int control_p = 0; - unsigned control = 0; - - /* In non-stop/async, threads can be running while we change the - global dr_mirror (and friends). Say, we set a watchpoint, and - let threads resume. Now, say you delete the watchpoint, or - add/remove watchpoints such that dr_mirror changes while threads - are running. On targets that support non-stop, - inserting/deleting watchpoints updates the global dr_mirror only. - It does not update the real thread's debug registers; that's only - done prior to resume. Instead, if threads are running when the - mirror changes, a temporary and transparent stop on all threads - is forced so they can get their copy of the debug registers - updated on re-resume. Now, say, a thread hit a watchpoint before - having been updated with the new dr_mirror contents, and we - haven't yet handled the corresponding SIGTRAP. If we trusted - dr_mirror below, we'd mistake the real trapped address (from the - last time we had updated debug registers in the thread) with - whatever was currently in dr_mirror. So to fix this, dr_mirror - always represents intention, what we _want_ threads to have in - debug registers. To get at the address and cause of the trap, we - need to read the state the thread still has in its debug - registers. - - In sum, always get the current debug register values the current - thread has, instead of trusting the global mirror. If the thread - was running when we last changed watchpoints, the mirror no - longer represents what was set in this thread's debug - registers. */ - status = i386_dr_low_get_status (); - - ALL_DEBUG_REGISTERS (i) - { - if (!I386_DR_WATCH_HIT (status, i)) - continue; - - if (!control_p) - { - control = i386_dr_low_get_control (); - control_p = 1; - } - - /* This second condition makes sure DRi is set up for a data - watchpoint, not a hardware breakpoint. The reason is that - GDB doesn't call the target_stopped_data_address method - except for data watchpoints. In other words, I'm being - paranoiac. */ - if (I386_DR_GET_RW_LEN (control, i) != 0) - { - addr = i386_dr_low_get_addr (i); - rc = 1; - if (debug_hw_points) - i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write); - } - } - - if (debug_hw_points && addr == 0) - i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write); - - if (rc) - *addr_p = addr; - return rc; -} - -/* Return non-zero if the inferior has some watchpoint that triggered. - Otherwise return zero. */ - -int -i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state) -{ - CORE_ADDR addr = 0; - return i386_dr_stopped_data_address (state, &addr); -} diff --git a/gdb/i386-nat.c b/gdb/i386-nat.c index c956583..750b878 100644 --- a/gdb/i386-nat.c +++ b/gdb/i386-nat.c @@ -19,11 +19,7 @@ #include "defs.h" #include "i386-nat.h" -#include "breakpoint.h" -#include "command.h" #include "gdbcmd.h" -#include "target.h" -#include "gdb_assert.h" #include "inferior.h" /* Support for hardware watchpoints and breakpoints using the i386 @@ -38,122 +34,11 @@ counts, and allow to watch regions up to 16 bytes long. */ /* Whether or not to print the mirrored debug registers. */ -static int debug_hw_points; - -/* Function used for printing mirrored debug registers. */ -#define debug_printf(fmt, args...) \ - fprintf_unfiltered (gdb_stdlog, fmt, ##args); +int debug_hw_points; /* Low-level function vector. */ struct i386_dr_low_type i386_dr_low; -/* Support for 8-byte wide hw watchpoints. */ -#define TARGET_HAS_DR_LEN_8 (i386_get_debug_register_length () == 8) - -/* DR7 Debug Control register fields. */ - -/* How many bits to skip in DR7 to get to R/W and LEN fields. */ -#define DR_CONTROL_SHIFT 16 -/* How many bits in DR7 per R/W and LEN field for each watchpoint. */ -#define DR_CONTROL_SIZE 4 - -/* Watchpoint/breakpoint read/write fields in DR7. */ -#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */ -#define DR_RW_WRITE (0x1) /* Break on data writes. */ -#define DR_RW_READ (0x3) /* Break on data reads or writes. */ - -/* This is here for completeness. No platform supports this - functionality yet (as of March 2001). Note that the DE flag in the - CR4 register needs to be set to support this. */ -#ifndef DR_RW_IORW -#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */ -#endif - -/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift - is so we could OR this with the read/write field defined above. */ -#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */ -#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */ -#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */ -#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */ - -/* Local and Global Enable flags in DR7. - - When the Local Enable flag is set, the breakpoint/watchpoint is - enabled only for the current task; the processor automatically - clears this flag on every task switch. When the Global Enable flag - is set, the breakpoint/watchpoint is enabled for all tasks; the - processor never clears this flag. - - Currently, all watchpoint are locally enabled. If you need to - enable them globally, read the comment which pertains to this in - i386_insert_aligned_watchpoint below. */ -#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */ -#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */ -#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */ - -/* Local and global exact breakpoint enable flags (a.k.a. slowdown - flags). These are only required on i386, to allow detection of the - exact instruction which caused a watchpoint to break; i486 and - later processors do that automatically. We set these flags for - backwards compatibility. */ -#define DR_LOCAL_SLOWDOWN (0x100) -#define DR_GLOBAL_SLOWDOWN (0x200) - -/* Fields reserved by Intel. This includes the GD (General Detect - Enable) flag, which causes a debug exception to be generated when a - MOV instruction accesses one of the debug registers. - - FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */ -#define DR_CONTROL_RESERVED (0xFC00) - -/* Auxiliary helper macros. */ - -/* A value that masks all fields in DR7 that are reserved by Intel. */ -#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED) - -/* The I'th debug register is vacant if its Local and Global Enable - bits are reset in the Debug Control register. */ -#define I386_DR_VACANT(state, i) \ - (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0) - -/* Locally enable the break/watchpoint in the I'th debug register. */ -#define I386_DR_LOCAL_ENABLE(state, i) \ - do { \ - (state)->dr_control_mirror |= \ - (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \ - } while (0) - -/* Globally enable the break/watchpoint in the I'th debug register. */ -#define I386_DR_GLOBAL_ENABLE(state, i) \ - do { \ - (state)->dr_control_mirror |= \ - (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \ - } while (0) - -/* Disable the break/watchpoint in the I'th debug register. */ -#define I386_DR_DISABLE(state, i) \ - do { \ - (state)->dr_control_mirror &= \ - ~(3 << (DR_ENABLE_SIZE * (i))); \ - } while (0) - -/* Set in DR7 the RW and LEN fields for the I'th debug register. */ -#define I386_DR_SET_RW_LEN(state, i, rwlen) \ - do { \ - (state)->dr_control_mirror &= \ - ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \ - (state)->dr_control_mirror |= \ - ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \ - } while (0) - -/* Get from DR7 the RW and LEN fields for the I'th debug register. */ -#define I386_DR_GET_RW_LEN(dr7, i) \ - (((dr7) \ - >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f) - -/* Did the watchpoint whose address is in the I'th register break? */ -#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i))) - /* Per-process data. We don't bind this to a per-inferior registry because of targets like x86 GNU/Linux that need to keep track of processes that aren't bound to any inferior (e.g., fork children, @@ -252,11 +137,6 @@ i386_forget_process (pid_t pid) } } -/* Types of operations supported by i386_handle_nonaligned_watchpoint. */ -typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t; - -/* Implementation. */ - /* Clear the reference counts and forget everything we knew about the debug registers. */ @@ -267,281 +147,6 @@ i386_cleanup_dregs (void) i386_forget_process (ptid_get_pid (inferior_ptid)); } -/* Print the values of the mirrored debug registers. */ - -static void -i386_show_dr (struct i386_debug_reg_state *state, - const char *func, CORE_ADDR addr, - int len, enum target_hw_bp_type type) -{ - int i; - - debug_printf ("%s", func); - if (addr || len) - debug_printf (" (addr=%s, len=%d, type=%s)", - phex (addr, 8), len, - type == hw_write ? "data-write" - : (type == hw_read ? "data-read" - : (type == hw_access ? "data-read/write" - : (type == hw_execute ? "instruction-execute" - /* FIXME: if/when I/O read/write - watchpoints are supported, add them - here. */ - : "??unknown??")))); - debug_printf (":\n"); - debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n", - phex (state->dr_control_mirror, 8), - phex (state->dr_status_mirror, 8)); - ALL_DEBUG_REGISTERS (i) - { - debug_printf ("\ -\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n", - i, phex (state->dr_mirror[i], - i386_get_debug_register_length ()), - state->dr_ref_count[i], - i + 1, phex (state->dr_mirror[i + 1], - i386_get_debug_register_length ()), - state->dr_ref_count[i + 1]); - i++; - } -} - -/* Return the value of a 4-bit field for DR7 suitable for watching a - region of LEN bytes for accesses of type TYPE. LEN is assumed to - have the value of 1, 2, or 4. */ - -static unsigned -i386_length_and_rw_bits (int len, enum target_hw_bp_type type) -{ - unsigned rw; - - switch (type) - { - case hw_execute: - rw = DR_RW_EXECUTE; - break; - case hw_write: - rw = DR_RW_WRITE; - break; - case hw_read: - internal_error (__FILE__, __LINE__, - _("The i386 doesn't support " - "data-read watchpoints.\n")); - case hw_access: - rw = DR_RW_READ; - break; -#if 0 - /* Not yet supported. */ - case hw_io_access: - rw = DR_RW_IORW; - break; -#endif - default: - internal_error (__FILE__, __LINE__, _("\ -Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"), - (int) type); - } - - switch (len) - { - case 1: - return (DR_LEN_1 | rw); - case 2: - return (DR_LEN_2 | rw); - case 4: - return (DR_LEN_4 | rw); - case 8: - if (TARGET_HAS_DR_LEN_8) - return (DR_LEN_8 | rw); - /* ELSE FALL THROUGH */ - default: - internal_error (__FILE__, __LINE__, _("\ -Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len); - } -} - -/* Insert a watchpoint at address ADDR, which is assumed to be aligned - according to the length of the region to watch. LEN_RW_BITS is the - value of the bits from DR7 which describes the length and access - type of the region to be watched by this watchpoint. Return 0 on - success, -1 on failure. */ - -static int -i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state, - CORE_ADDR addr, unsigned len_rw_bits) -{ - int i; - - if (!i386_dr_low_can_set_addr () || !i386_dr_low_can_set_control ()) - return -1; - - /* First, look for an occupied debug register with the same address - and the same RW and LEN definitions. If we find one, we can - reuse it for this watchpoint as well (and save a register). */ - ALL_DEBUG_REGISTERS (i) - { - if (!I386_DR_VACANT (state, i) - && state->dr_mirror[i] == addr - && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits) - { - state->dr_ref_count[i]++; - return 0; - } - } - - /* Next, look for a vacant debug register. */ - ALL_DEBUG_REGISTERS (i) - { - if (I386_DR_VACANT (state, i)) - break; - } - - /* No more debug registers! */ - if (i >= DR_NADDR) - return -1; - - /* Now set up the register I to watch our region. */ - - /* Record the info in our local mirrored array. */ - state->dr_mirror[i] = addr; - state->dr_ref_count[i] = 1; - I386_DR_SET_RW_LEN (state, i, len_rw_bits); - /* Note: we only enable the watchpoint locally, i.e. in the current - task. Currently, no i386 target allows or supports global - watchpoints; however, if any target would want that in the - future, GDB should probably provide a command to control whether - to enable watchpoints globally or locally, and the code below - should use global or local enable and slow-down flags as - appropriate. */ - I386_DR_LOCAL_ENABLE (state, i); - state->dr_control_mirror |= DR_LOCAL_SLOWDOWN; - state->dr_control_mirror &= I386_DR_CONTROL_MASK; - - return 0; -} - -/* Remove a watchpoint at address ADDR, which is assumed to be aligned - according to the length of the region to watch. LEN_RW_BITS is the - value of the bits from DR7 which describes the length and access - type of the region watched by this watchpoint. Return 0 on - success, -1 on failure. */ - -static int -i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state, - CORE_ADDR addr, unsigned len_rw_bits) -{ - int i, retval = -1; - - ALL_DEBUG_REGISTERS (i) - { - if (!I386_DR_VACANT (state, i) - && state->dr_mirror[i] == addr - && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits) - { - if (--state->dr_ref_count[i] == 0) /* No longer in use? */ - { - /* Reset our mirror. */ - state->dr_mirror[i] = 0; - I386_DR_DISABLE (state, i); - } - retval = 0; - } - } - - return retval; -} - -/* Insert or remove a (possibly non-aligned) watchpoint, or count the - number of debug registers required to watch a region at address - ADDR whose length is LEN for accesses of type TYPE. Return 0 on - successful insertion or removal, a positive number when queried - about the number of registers, or -1 on failure. If WHAT is not a - valid value, bombs through internal_error. */ - -static int -i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state, - i386_wp_op_t what, CORE_ADDR addr, int len, - enum target_hw_bp_type type) -{ - int retval = 0; - int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4; - - static const int size_try_array[8][8] = - { - {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */ - {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */ - {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */ - {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */ - {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */ - {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */ - {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */ - {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */ - }; - - while (len > 0) - { - int align = addr % max_wp_len; - /* Four (eight on AMD64) is the maximum length a debug register - can watch. */ - int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1); - int size = size_try_array[try][align]; - - if (what == WP_COUNT) - { - /* size_try_array[] is defined such that each iteration - through the loop is guaranteed to produce an address and a - size that can be watched with a single debug register. - Thus, for counting the registers required to watch a - region, we simply need to increment the count on each - iteration. */ - retval++; - } - else - { - unsigned len_rw = i386_length_and_rw_bits (size, type); - - if (what == WP_INSERT) - retval = i386_insert_aligned_watchpoint (state, addr, len_rw); - else if (what == WP_REMOVE) - retval = i386_remove_aligned_watchpoint (state, addr, len_rw); - else - internal_error (__FILE__, __LINE__, _("\ -Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"), - (int) what); - if (retval) - break; - } - - addr += size; - len -= size; - } - - return retval; -} - -/* Update the inferior debug registers state, in STATE, with the - new debug registers state, in NEW_STATE. */ - -static void -i386_update_inferior_debug_regs (struct i386_debug_reg_state *state, - struct i386_debug_reg_state *new_state) -{ - int i; - - ALL_DEBUG_REGISTERS (i) - { - if (I386_DR_VACANT (new_state, i) != I386_DR_VACANT (state, i)) - i386_dr_low_set_addr (new_state, i); - else - gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]); - } - - if (new_state->dr_control_mirror != state->dr_control_mirror) - i386_dr_low_set_control (new_state); - - *state = *new_state; -} - /* Insert a watchpoint to watch a memory region which starts at address ADDR and whose length is LEN bytes. Watch memory accesses of the type TYPE. Return 0 on success, -1 on failure. */ @@ -553,37 +158,8 @@ i386_insert_watchpoint (struct target_ops *self, { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); - int retval; - /* Work on a local copy of the debug registers, and on success, - commit the change back to the inferior. */ - struct i386_debug_reg_state local_state = *state; - - if (type == hw_read) - return 1; /* unsupported */ - - if (((len != 1 && len != 2 && len != 4) - && !(TARGET_HAS_DR_LEN_8 && len == 8)) - || addr % len != 0) - { - retval = i386_handle_nonaligned_watchpoint (&local_state, - WP_INSERT, - addr, len, type); - } - else - { - unsigned len_rw = i386_length_and_rw_bits (len, type); - - retval = i386_insert_aligned_watchpoint (&local_state, - addr, len_rw); - } - - if (retval == 0) - i386_update_inferior_debug_regs (state, &local_state); - if (debug_hw_points) - i386_show_dr (state, "insert_watchpoint", addr, len, type); - - return retval; + return i386_dr_insert_watchpoint (state, type, addr, len); } /* Remove a watchpoint that watched the memory region which starts at @@ -596,34 +172,8 @@ i386_remove_watchpoint (struct target_ops *self, { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); - int retval; - /* Work on a local copy of the debug registers, and on success, - commit the change back to the inferior. */ - struct i386_debug_reg_state local_state = *state; - - if (((len != 1 && len != 2 && len != 4) - && !(TARGET_HAS_DR_LEN_8 && len == 8)) - || addr % len != 0) - { - retval = i386_handle_nonaligned_watchpoint (&local_state, - WP_REMOVE, - addr, len, type); - } - else - { - unsigned len_rw = i386_length_and_rw_bits (len, type); - - retval = i386_remove_aligned_watchpoint (&local_state, - addr, len_rw); - } - if (retval == 0) - i386_update_inferior_debug_regs (state, &local_state); - - if (debug_hw_points) - i386_show_dr (state, "remove_watchpoint", addr, len, type); - - return retval; + return i386_dr_remove_watchpoint (state, type, addr, len); } /* Return non-zero if we can watch a memory region that starts at @@ -635,13 +185,8 @@ i386_region_ok_for_watchpoint (struct target_ops *self, { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); - int nregs; - /* Compute how many aligned watchpoints we would need to cover this - region. */ - nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT, - addr, len, hw_write); - return nregs <= DR_NADDR ? 1 : 0; + return i386_dr_region_ok_for_watchpoint (state, addr, len); } /* If the inferior has some break/watchpoint that triggered, set the @@ -653,77 +198,8 @@ i386_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p) { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); - CORE_ADDR addr = 0; - int i; - int rc = 0; - /* The current thread's DR_STATUS. We always need to read this to - check whether some watchpoint caused the trap. */ - unsigned status; - /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a - data breakpoint trap. Only fetch it when necessary, to avoid an - unnecessary extra syscall when no watchpoint triggered. */ - int control_p = 0; - unsigned control = 0; - - /* In non-stop/async, threads can be running while we change the - global dr_mirror (and friends). Say, we set a watchpoint, and - let threads resume. Now, say you delete the watchpoint, or - add/remove watchpoints such that dr_mirror changes while threads - are running. On targets that support non-stop, - inserting/deleting watchpoints updates the global dr_mirror only. - It does not update the real thread's debug registers; that's only - done prior to resume. Instead, if threads are running when the - mirror changes, a temporary and transparent stop on all threads - is forced so they can get their copy of the debug registers - updated on re-resume. Now, say, a thread hit a watchpoint before - having been updated with the new dr_mirror contents, and we - haven't yet handled the corresponding SIGTRAP. If we trusted - dr_mirror below, we'd mistake the real trapped address (from the - last time we had updated debug registers in the thread) with - whatever was currently in dr_mirror. So to fix this, dr_mirror - always represents intention, what we _want_ threads to have in - debug registers. To get at the address and cause of the trap, we - need to read the state the thread still has in its debug - registers. - - In sum, always get the current debug register values the current - thread has, instead of trusting the global mirror. If the thread - was running when we last changed watchpoints, the mirror no - longer represents what was set in this thread's debug - registers. */ - status = i386_dr_low_get_status (); - - ALL_DEBUG_REGISTERS (i) - { - if (!I386_DR_WATCH_HIT (status, i)) - continue; - - if (!control_p) - { - control = i386_dr_low_get_control (); - control_p = 1; - } - - /* This second condition makes sure DRi is set up for a data - watchpoint, not a hardware breakpoint. The reason is that - GDB doesn't call the target_stopped_data_address method - except for data watchpoints. In other words, I'm being - paranoiac. */ - if (I386_DR_GET_RW_LEN (control, i) != 0) - { - addr = i386_dr_low_get_addr (i); - rc = 1; - if (debug_hw_points) - i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write); - } - } - - if (debug_hw_points && addr == 0) - i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write); - if (rc) - *addr_p = addr; - return rc; + return i386_dr_stopped_data_address (state, addr_p); } /* Return non-zero if the inferior has some watchpoint that triggered. diff --git a/gdb/i386-nat.h b/gdb/i386-nat.h index f20b013..4a213b32 100644 --- a/gdb/i386-nat.h +++ b/gdb/i386-nat.h @@ -27,6 +27,9 @@ /* Hardware-assisted breakpoints and watchpoints. */ +/* Whether or not to print the mirrored debug registers. */ +extern int debug_hw_points; + /* Add watchpoint methods to the provided target_ops. Targets using i386 family debug registers for watchpoints should call this. */ diff --git a/gdb/nat/i386-dregs.c b/gdb/nat/i386-dregs.c new file mode 100644 index 0000000..0067a90 --- /dev/null +++ b/gdb/nat/i386-dregs.c @@ -0,0 +1,617 @@ +/* Debug register code for the i386. + + Copyright (C) 2001-2014 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#ifdef GDBSERVER +#include "server.h" +#include "i386-low.h" +#else +#include "defs.h" +#include "i386-nat.h" +#include "inferior.h" +#endif + +/* Support for hardware watchpoints and breakpoints using the i386 + debug registers. + + This provides several functions for inserting and removing + hardware-assisted breakpoints and watchpoints, testing if one or + more of the watchpoints triggered and at what address, checking + whether a given region can be watched, etc. + + The functions below implement debug registers sharing by reference + counts, and allow to watch regions up to 16 bytes long. */ + +/* Support for 8-byte wide hw watchpoints. */ +#define TARGET_HAS_DR_LEN_8 (i386_get_debug_register_length () == 8) + +/* DR7 Debug Control register fields. */ + +/* How many bits to skip in DR7 to get to R/W and LEN fields. */ +#define DR_CONTROL_SHIFT 16 +/* How many bits in DR7 per R/W and LEN field for each watchpoint. */ +#define DR_CONTROL_SIZE 4 + +/* Watchpoint/breakpoint read/write fields in DR7. */ +#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */ +#define DR_RW_WRITE (0x1) /* Break on data writes. */ +#define DR_RW_READ (0x3) /* Break on data reads or writes. */ + +/* This is here for completeness. No platform supports this + functionality yet (as of March 2001). Note that the DE flag in the + CR4 register needs to be set to support this. */ +#ifndef DR_RW_IORW +#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */ +#endif + +/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift + is so we could OR this with the read/write field defined above. */ +#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */ +#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */ +#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */ +#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */ + +/* Local and Global Enable flags in DR7. + + When the Local Enable flag is set, the breakpoint/watchpoint is + enabled only for the current task; the processor automatically + clears this flag on every task switch. When the Global Enable flag + is set, the breakpoint/watchpoint is enabled for all tasks; the + processor never clears this flag. + + Currently, all watchpoint are locally enabled. If you need to + enable them globally, read the comment which pertains to this in + i386_insert_aligned_watchpoint below. */ +#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */ +#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */ +#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */ + +/* Local and global exact breakpoint enable flags (a.k.a. slowdown + flags). These are only required on i386, to allow detection of the + exact instruction which caused a watchpoint to break; i486 and + later processors do that automatically. We set these flags for + backwards compatibility. */ +#define DR_LOCAL_SLOWDOWN (0x100) +#define DR_GLOBAL_SLOWDOWN (0x200) + +/* Fields reserved by Intel. This includes the GD (General Detect + Enable) flag, which causes a debug exception to be generated when a + MOV instruction accesses one of the debug registers. + + FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */ +#define DR_CONTROL_RESERVED (0xFC00) + +/* Auxiliary helper macros. */ + +/* A value that masks all fields in DR7 that are reserved by Intel. */ +#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED) + +/* The I'th debug register is vacant if its Local and Global Enable + bits are reset in the Debug Control register. */ +#define I386_DR_VACANT(state, i) \ + (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0) + +/* Locally enable the break/watchpoint in the I'th debug register. */ +#define I386_DR_LOCAL_ENABLE(state, i) \ + do { \ + (state)->dr_control_mirror |= \ + (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \ + } while (0) + +/* Globally enable the break/watchpoint in the I'th debug register. */ +#define I386_DR_GLOBAL_ENABLE(state, i) \ + do { \ + (state)->dr_control_mirror |= \ + (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \ + } while (0) + +/* Disable the break/watchpoint in the I'th debug register. */ +#define I386_DR_DISABLE(state, i) \ + do { \ + (state)->dr_control_mirror &= \ + ~(3 << (DR_ENABLE_SIZE * (i))); \ + } while (0) + +/* Set in DR7 the RW and LEN fields for the I'th debug register. */ +#define I386_DR_SET_RW_LEN(state, i, rwlen) \ + do { \ + (state)->dr_control_mirror &= \ + ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \ + (state)->dr_control_mirror |= \ + ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \ + } while (0) + +/* Get from DR7 the RW and LEN fields for the I'th debug register. */ +#define I386_DR_GET_RW_LEN(dr7, i) \ + (((dr7) \ + >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f) + +/* Did the watchpoint whose address is in the I'th register break? */ +#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i))) + +/* Types of operations supported by i386_handle_nonaligned_watchpoint. */ +typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t; + +/* Print debugging messages. */ +#ifndef GDBSERVER +#define debug_printf(fmt, args...) \ + fprintf_unfiltered (gdb_stdlog, fmt, ##args); +#endif + +/* Print the values of the mirrored debug registers. */ + +static void +i386_show_dr (struct i386_debug_reg_state *state, + const char *func, CORE_ADDR addr, + int len, enum target_hw_bp_type type) +{ + int i; + + debug_printf ("%s", func); + if (addr || len) + debug_printf (" (addr=%s, len=%d, type=%s)", + phex (addr, 8), len, + type == hw_write ? "data-write" + : (type == hw_read ? "data-read" + : (type == hw_access ? "data-read/write" + : (type == hw_execute ? "instruction-execute" + /* FIXME: if/when I/O read/write + watchpoints are supported, add them + here. */ + : "??unknown??")))); + debug_printf (":\n"); + debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n", + phex (state->dr_control_mirror, 8), + phex (state->dr_status_mirror, 8)); + ALL_DEBUG_REGISTERS (i) + { + debug_printf ("\ +\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n", + i, phex (state->dr_mirror[i], + i386_get_debug_register_length ()), + state->dr_ref_count[i], + i + 1, phex (state->dr_mirror[i + 1], + i386_get_debug_register_length ()), + state->dr_ref_count[i + 1]); + i++; + } +} + +/* Return the value of a 4-bit field for DR7 suitable for watching a + region of LEN bytes for accesses of type TYPE. LEN is assumed to + have the value of 1, 2, or 4. */ + +static unsigned +i386_length_and_rw_bits (int len, enum target_hw_bp_type type) +{ + unsigned rw; + + switch (type) + { + case hw_execute: + rw = DR_RW_EXECUTE; + break; + case hw_write: + rw = DR_RW_WRITE; + break; + case hw_read: + internal_error (__FILE__, __LINE__, + _("The i386 doesn't support " + "data-read watchpoints.\n")); + case hw_access: + rw = DR_RW_READ; + break; +#if 0 + /* Not yet supported. */ + case hw_io_access: + rw = DR_RW_IORW; + break; +#endif + default: + internal_error (__FILE__, __LINE__, _("\ +Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"), + (int) type); + } + + switch (len) + { + case 1: + return (DR_LEN_1 | rw); + case 2: + return (DR_LEN_2 | rw); + case 4: + return (DR_LEN_4 | rw); + case 8: + if (TARGET_HAS_DR_LEN_8) + return (DR_LEN_8 | rw); + /* ELSE FALL THROUGH */ + default: + internal_error (__FILE__, __LINE__, _("\ +Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len); + } +} + +/* Insert a watchpoint at address ADDR, which is assumed to be aligned + according to the length of the region to watch. LEN_RW_BITS is the + value of the bits from DR7 which describes the length and access + type of the region to be watched by this watchpoint. Return 0 on + success, -1 on failure. */ + +static int +i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state, + CORE_ADDR addr, unsigned len_rw_bits) +{ + int i; + + if (!i386_dr_low_can_set_addr () || !i386_dr_low_can_set_control ()) + return -1; + + /* First, look for an occupied debug register with the same address + and the same RW and LEN definitions. If we find one, we can + reuse it for this watchpoint as well (and save a register). */ + ALL_DEBUG_REGISTERS (i) + { + if (!I386_DR_VACANT (state, i) + && state->dr_mirror[i] == addr + && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits) + { + state->dr_ref_count[i]++; + return 0; + } + } + + /* Next, look for a vacant debug register. */ + ALL_DEBUG_REGISTERS (i) + { + if (I386_DR_VACANT (state, i)) + break; + } + + /* No more debug registers! */ + if (i >= DR_NADDR) + return -1; + + /* Now set up the register I to watch our region. */ + + /* Record the info in our local mirrored array. */ + state->dr_mirror[i] = addr; + state->dr_ref_count[i] = 1; + I386_DR_SET_RW_LEN (state, i, len_rw_bits); + /* Note: we only enable the watchpoint locally, i.e. in the current + task. Currently, no i386 target allows or supports global + watchpoints; however, if any target would want that in the + future, GDB should probably provide a command to control whether + to enable watchpoints globally or locally, and the code below + should use global or local enable and slow-down flags as + appropriate. */ + I386_DR_LOCAL_ENABLE (state, i); + state->dr_control_mirror |= DR_LOCAL_SLOWDOWN; + state->dr_control_mirror &= I386_DR_CONTROL_MASK; + + return 0; +} + +/* Remove a watchpoint at address ADDR, which is assumed to be aligned + according to the length of the region to watch. LEN_RW_BITS is the + value of the bits from DR7 which describes the length and access + type of the region watched by this watchpoint. Return 0 on + success, -1 on failure. */ + +static int +i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state, + CORE_ADDR addr, unsigned len_rw_bits) +{ + int i, retval = -1; + + ALL_DEBUG_REGISTERS (i) + { + if (!I386_DR_VACANT (state, i) + && state->dr_mirror[i] == addr + && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits) + { + if (--state->dr_ref_count[i] == 0) /* No longer in use? */ + { + /* Reset our mirror. */ + state->dr_mirror[i] = 0; + I386_DR_DISABLE (state, i); + } + retval = 0; + } + } + + return retval; +} + +/* Insert or remove a (possibly non-aligned) watchpoint, or count the + number of debug registers required to watch a region at address + ADDR whose length is LEN for accesses of type TYPE. Return 0 on + successful insertion or removal, a positive number when queried + about the number of registers, or -1 on failure. If WHAT is not a + valid value, bombs through internal_error. */ + +static int +i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state, + i386_wp_op_t what, CORE_ADDR addr, int len, + enum target_hw_bp_type type) +{ + int retval = 0; + int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4; + + static const int size_try_array[8][8] = + { + {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */ + {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */ + {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */ + {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */ + {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */ + {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */ + {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */ + {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */ + }; + + while (len > 0) + { + int align = addr % max_wp_len; + /* Four (eight on AMD64) is the maximum length a debug register + can watch. */ + int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1); + int size = size_try_array[try][align]; + + if (what == WP_COUNT) + { + /* size_try_array[] is defined such that each iteration + through the loop is guaranteed to produce an address and a + size that can be watched with a single debug register. + Thus, for counting the registers required to watch a + region, we simply need to increment the count on each + iteration. */ + retval++; + } + else + { + unsigned len_rw = i386_length_and_rw_bits (size, type); + + if (what == WP_INSERT) + retval = i386_insert_aligned_watchpoint (state, addr, len_rw); + else if (what == WP_REMOVE) + retval = i386_remove_aligned_watchpoint (state, addr, len_rw); + else + internal_error (__FILE__, __LINE__, _("\ +Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"), + (int) what); + if (retval) + break; + } + + addr += size; + len -= size; + } + + return retval; +} + +/* Update the inferior debug registers state, in STATE, with the + new debug registers state, in NEW_STATE. */ + +static void +i386_update_inferior_debug_regs (struct i386_debug_reg_state *state, + struct i386_debug_reg_state *new_state) +{ + int i; + + ALL_DEBUG_REGISTERS (i) + { + if (I386_DR_VACANT (new_state, i) != I386_DR_VACANT (state, i)) + i386_dr_low_set_addr (new_state, i); + else + gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]); + } + + if (new_state->dr_control_mirror != state->dr_control_mirror) + i386_dr_low_set_control (new_state); + + *state = *new_state; +} + +/* Insert a watchpoint to watch a memory region which starts at + address ADDR and whose length is LEN bytes. Watch memory accesses + of the type TYPE. Return 0 on success, -1 on failure. */ + +int +i386_dr_insert_watchpoint (struct i386_debug_reg_state *state, + enum target_hw_bp_type type, + CORE_ADDR addr, int len) +{ + int retval; + /* Work on a local copy of the debug registers, and on success, + commit the change back to the inferior. */ + struct i386_debug_reg_state local_state = *state; + + if (type == hw_read) + return 1; /* unsupported */ + + if (((len != 1 && len != 2 && len != 4) + && !(TARGET_HAS_DR_LEN_8 && len == 8)) + || addr % len != 0) + { + retval = i386_handle_nonaligned_watchpoint (&local_state, + WP_INSERT, + addr, len, type); + } + else + { + unsigned len_rw = i386_length_and_rw_bits (len, type); + + retval = i386_insert_aligned_watchpoint (&local_state, + addr, len_rw); + } + + if (retval == 0) + i386_update_inferior_debug_regs (state, &local_state); + + if (debug_hw_points) + i386_show_dr (state, "insert_watchpoint", addr, len, type); + + return retval; +} + +/* Remove a watchpoint that watched the memory region which starts at + address ADDR, whose length is LEN bytes, and for accesses of the + type TYPE. Return 0 on success, -1 on failure. */ + +int +i386_dr_remove_watchpoint (struct i386_debug_reg_state *state, + enum target_hw_bp_type type, + CORE_ADDR addr, int len) +{ + int retval; + /* Work on a local copy of the debug registers, and on success, + commit the change back to the inferior. */ + struct i386_debug_reg_state local_state = *state; + + if (((len != 1 && len != 2 && len != 4) + && !(TARGET_HAS_DR_LEN_8 && len == 8)) + || addr % len != 0) + { + retval = i386_handle_nonaligned_watchpoint (&local_state, + WP_REMOVE, + addr, len, type); + } + else + { + unsigned len_rw = i386_length_and_rw_bits (len, type); + + retval = i386_remove_aligned_watchpoint (&local_state, + addr, len_rw); + } + + if (retval == 0) + i386_update_inferior_debug_regs (state, &local_state); + + if (debug_hw_points) + i386_show_dr (state, "remove_watchpoint", addr, len, type); + + return retval; +} + +/* Return non-zero if we can watch a memory region that starts at + address ADDR and whose length is LEN bytes. */ + +int +i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state, + CORE_ADDR addr, int len) +{ + int nregs; + + /* Compute how many aligned watchpoints we would need to cover this + region. */ + nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT, + addr, len, hw_write); + return nregs <= DR_NADDR ? 1 : 0; +} + +/* If the inferior has some break/watchpoint that triggered, set the + address associated with that break/watchpoint and return non-zero. + Otherwise, return zero. */ + +int +i386_dr_stopped_data_address (struct i386_debug_reg_state *state, + CORE_ADDR *addr_p) +{ + CORE_ADDR addr = 0; + int i; + int rc = 0; + /* The current thread's DR_STATUS. We always need to read this to + check whether some watchpoint caused the trap. */ + unsigned status; + /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a + data breakpoint trap. Only fetch it when necessary, to avoid an + unnecessary extra syscall when no watchpoint triggered. */ + int control_p = 0; + unsigned control = 0; + + /* In non-stop/async, threads can be running while we change the + global dr_mirror (and friends). Say, we set a watchpoint, and + let threads resume. Now, say you delete the watchpoint, or + add/remove watchpoints such that dr_mirror changes while threads + are running. On targets that support non-stop, + inserting/deleting watchpoints updates the global dr_mirror only. + It does not update the real thread's debug registers; that's only + done prior to resume. Instead, if threads are running when the + mirror changes, a temporary and transparent stop on all threads + is forced so they can get their copy of the debug registers + updated on re-resume. Now, say, a thread hit a watchpoint before + having been updated with the new dr_mirror contents, and we + haven't yet handled the corresponding SIGTRAP. If we trusted + dr_mirror below, we'd mistake the real trapped address (from the + last time we had updated debug registers in the thread) with + whatever was currently in dr_mirror. So to fix this, dr_mirror + always represents intention, what we _want_ threads to have in + debug registers. To get at the address and cause of the trap, we + need to read the state the thread still has in its debug + registers. + + In sum, always get the current debug register values the current + thread has, instead of trusting the global mirror. If the thread + was running when we last changed watchpoints, the mirror no + longer represents what was set in this thread's debug + registers. */ + status = i386_dr_low_get_status (); + + ALL_DEBUG_REGISTERS (i) + { + if (!I386_DR_WATCH_HIT (status, i)) + continue; + + if (!control_p) + { + control = i386_dr_low_get_control (); + control_p = 1; + } + + /* This second condition makes sure DRi is set up for a data + watchpoint, not a hardware breakpoint. The reason is that + GDB doesn't call the target_stopped_data_address method + except for data watchpoints. In other words, I'm being + paranoiac. */ + if (I386_DR_GET_RW_LEN (control, i) != 0) + { + addr = i386_dr_low_get_addr (i); + rc = 1; + if (debug_hw_points) + i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write); + } + } + + if (debug_hw_points && addr == 0) + i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write); + + if (rc) + *addr_p = addr; + return rc; +} + +/* Return non-zero if the inferior has some watchpoint that triggered. + Otherwise return zero. */ + +int +i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state) +{ + CORE_ADDR addr = 0; + return i386_dr_stopped_data_address (state, &addr); +} -- 2.7.4