From 39ac0979de635c8be94e1353afde65524ac1ed03 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sat, 23 Jan 2016 22:37:17 +0200 Subject: [PATCH] ARM: dts: kirkwood: provide template for RS-232/485 configuration for OpenRD Some OpenRD boards have RS-232 and RS-486 connectors wired, but using them needs a custom DTB as the current DTB configures SD card slot instead. This patch adds documentation into the DTS on how to change the configuration. Signed-off-by: Aaro Koskinen Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-openrd.dtsi | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi index f65b727..24f1d30 100644 --- a/arch/arm/boot/dts/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -40,7 +40,7 @@ pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; pinctrl-names = "default"; - pmx_select28: pmx-select-rs232-rs484 { + pmx_select28: pmx-select-rs232-rs485 { marvell,pins = "mpp28"; marvell,function = "gpio"; }; @@ -65,10 +65,39 @@ status = "okay"; cd-gpios = <&gpio0 29 9>; }; + gpio@10100 { + p28 { + gpio-hog; + gpios = <28 GPIO_ACTIVE_HIGH>; + /* + * SelRS232or485 selects between RS-232 or RS-485 + * mode for the second UART. + * + * Low: RS-232 + * High: RS-485 + * + * To use the second UART, you need to change also + * the SelUARTorSD. + */ + output-low; + line-name = "SelRS232or485"; + }; + }; gpio@10140 { p2 { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; + /* + * SelUARTorSD selects between the second UART + * (serial@12100) and SD (mvsdio@90000). + * + * Low: UART + * High: SD + * + * When changing this line make sure the newly + * selected device node is enabled and the + * previously selected device node is disabled. + */ output-high; /* Select SD by default */ line-name = "SelUARTorSD"; }; -- 2.7.4