From 38a829a389e33d571a3c599fa762d88b3d1f72c4 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 3 Apr 2019 12:23:59 +0200 Subject: [PATCH] dmaengine: at_xdmac: only monitor overflow errors for peripheral xfer The overflow error flag (ROI: Request Overflow Error) is only relevant for the case when the channel handles a peripheral synchronized transfer. Not in the case of memory to memory transfer where there is no hardware request signal. Remove the use of this interrupt source in such a case. It's based on the first descriptor which holds the configuration for the whole linked list transfer. Signed-off-by: Nicolas Ferre Acked-by: Ludovic Desroches Signed-off-by: Vinod Koul --- drivers/dma/at_xdmac.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index 1dd7eda..06cbe54 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -308,6 +308,11 @@ static inline int at_xdmac_csize(u32 maxburst) return csize; }; +static inline bool at_xdmac_chan_is_peripheral_xfer(u32 cfg) +{ + return cfg & AT_XDMAC_CC_TYPE_PER_TRAN; +} + static inline u8 at_xdmac_get_dwidth(u32 cfg) { return (cfg & AT_XDMAC_CC_DWIDTH_MASK) >> AT_XDMAC_CC_DWIDTH_OFFSET; @@ -389,7 +394,13 @@ static void at_xdmac_start_xfer(struct at_xdmac_chan *atchan, at_xdmac_chan_read(atchan, AT_XDMAC_CUBC)); at_xdmac_chan_write(atchan, AT_XDMAC_CID, 0xffffffff); - reg = AT_XDMAC_CIE_RBEIE | AT_XDMAC_CIE_WBEIE | AT_XDMAC_CIE_ROIE; + reg = AT_XDMAC_CIE_RBEIE | AT_XDMAC_CIE_WBEIE; + /* + * Request Overflow Error is only for peripheral synchronized transfers + */ + if (at_xdmac_chan_is_peripheral_xfer(first->lld.mbr_cfg)) + reg |= AT_XDMAC_CIE_ROIE; + /* * There is no end of list when doing cyclic dma, we need to get * an interrupt after each periods. -- 2.7.4