From 378eeda70cc27194f0f718b4c65b8ba147259910 Mon Sep 17 00:00:00 2001 From: Steve Hay Date: Sat, 10 Sep 2011 17:21:58 +0100 Subject: [PATCH] The Borland Chainsaw Massacre Remove support for the Borland C++ compiler on Win32, as agreed here: http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2011-09/msg00034.html --- MANIFEST | 3 - NetWare/Makefile | 3 +- NetWare/nw5iop.h | 8 - NetWare/nw5thread.h | 2 +- Porting/checkcfgvar.pl | 1 - Porting/exercise_makedef.pl | 2 +- Porting/makerel | 1 - README.win32 | 52 +- doio.c | 3 - dosish.h | 5 - ext/Errno/Errno_pm.PL | 10 +- ext/IPC-Open3/t/IPC-Open2.t | 6 +- ext/IPC-Open3/t/IPC-Open3.t | 4 +- ext/POSIX/POSIX.xs | 3 - ext/POSIX/lib/POSIX.pm | 2 +- hints/uwin.sh | 3 +- lib/ExtUtils/t/Embed.t | 7 - lib/File/DosGlob.pm | 7 +- makedef.pl | 6 +- perlio.c | 21 +- t/op/taint.t | 16 - t/win32/system.t | 18 - toke.c | 6 - win32/config.bc | 1086 ---------- win32/config_H.bc | 4698 ------------------------------------------- win32/config_sh.PL | 11 +- win32/fcrypt.c | 4 - win32/makefile.mk | 150 +- win32/perlhost.h | 16 - win32/perllib.c | 2 +- win32/sync_ext.pl | 71 - win32/win32.c | 188 +- win32/win32.h | 32 - win32/win32iop-o.h | 9 - win32/win32iop.h | 10 +- win32/win32sck.c | 2 - win32/win32thread.h | 15 +- win32/wince.c | 3 - win32/wincesck.c | 2 - x2p/a2p.c | 2 +- x2p/a2p.h | 13 - 41 files changed, 53 insertions(+), 6450 deletions(-) delete mode 100644 win32/config.bc delete mode 100644 win32/config_H.bc delete mode 100644 win32/sync_ext.pl diff --git a/MANIFEST b/MANIFEST index 4a33fc5..925d083 100644 --- a/MANIFEST +++ b/MANIFEST @@ -5252,12 +5252,10 @@ win32/ce-helpers/compile.bat WinCE port win32/ce-helpers/comp.pl WinCE port win32/ce-helpers/makedist.pl WinCE port win32/ce-helpers/registry.bat WinCE port -win32/config.bc Win32 base line config.sh (Borland C++ build) win32/config.ce WinCE port win32/config.gc Win32 base line config.sh (MinGW build) win32/config.gc64 Win64 base line config.sh (MinGW build) win32/config.gc64nox Win64 base line config.sh (MinGW build) -win32/config_H.bc Win32 config header (Borland C++ build) win32/config_H.ce WinCE port win32/config_H.gc Win32 config header (MinGW build) win32/config_H.gc64 Win64 config header (MinGW build) @@ -5292,7 +5290,6 @@ win32/perlmaince.c WinCE port win32/perl.rc WinCE port win32/pod.mak Win32 port win32/runperl.c Win32 port -win32/sync_ext.pl Win32 port win32/vdir.h Perl "host" virtual directory manager for CE win32/vmem.h Perl "host" memory manager for CE win32/win32.c Win32 port diff --git a/NetWare/Makefile b/NetWare/Makefile index 9074787..2ddc3bc 100644 --- a/NetWare/Makefile +++ b/NetWare/Makefile @@ -864,8 +864,7 @@ all : .cleanoldfiles .\nwconfig.h $(CONFIGPM) $(NLM_NAME) $(EXTENSION_NLM) $(EXT $(MINIPERL) -I..\lib config_sh.PL $(NW_CFG_VARS) config.nw5 > ..\config.sh # this target is for when changes to the main config.sh happen -# edit config.{b,v,g,w}c and make this target once for each supported -# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) +# edit config.wc and make this target regen_config_h: perl config_sh.PL $(NW_CFG_VARS) $(NW_CFGSH_TMPL) > ..\config.sh cd .. diff --git a/NetWare/nw5iop.h b/NetWare/nw5iop.h index 391c899..0026b32 100644 --- a/NetWare/nw5iop.h +++ b/NetWare/nw5iop.h @@ -191,14 +191,6 @@ END_EXTERN_C #undef uname #undef wait -#ifdef __BORLANDC__ -#undef ungetc -#undef getc -#undef putc -#undef getchar -#undef putchar -#undef fileno -#endif #define environ (*nw_environ()) diff --git a/NetWare/nw5thread.h b/NetWare/nw5thread.h index 6bdba24..b1a2534 100644 --- a/NetWare/nw5thread.h +++ b/NetWare/nw5thread.h @@ -154,7 +154,7 @@ typedef unsigned long perl_mutex; #endif //#if 0 //Following has to be defined CHKSGP -#if defined(PERLDLL) && defined(USE_DECLSPEC_THREAD) && (!defined(__BORLANDC__) || defined(_DLL)) +#if defined(PERLDLL) && defined(USE_DECLSPEC_THREAD) extern __declspec(thread) void *PL_current_context; #define PERL_SET_CONTEXT(t) (PL_current_context = t) #define PERL_GET_CONTEXT PL_current_context diff --git a/Porting/checkcfgvar.pl b/Porting/checkcfgvar.pl index f080085..5c3bc2e 100755 --- a/Porting/checkcfgvar.pl +++ b/Porting/checkcfgvar.pl @@ -40,7 +40,6 @@ my @CFG = ( "uconfig.sh", "uconfig64.sh", "plan9/config_sh.sample", - "win32/config.bc", "win32/config.gc", "win32/config.gc64", "win32/config.gc64nox", diff --git a/Porting/exercise_makedef.pl b/Porting/exercise_makedef.pl index 5d2628c..4003410 100644 --- a/Porting/exercise_makedef.pl +++ b/Porting/exercise_makedef.pl @@ -52,7 +52,7 @@ my @args = (platform => [map {"PLATFORM=$_"} qw(aix win32 wince os2 netware vms cflags => ['', 'CCFLAGS=-Dperl=rules -Dzzz'], Deq => ['', '-Dbeer=foamy'], D => ['', '-DPERL_IMPLICIT_SYS'], - cctype => ['', map {"CCTYPE=$_"} qw (MSVC60 GCC BORLAND)], + cctype => ['', map {"CCTYPE=$_"} qw (MSVC60 GCC)], filetype => ['', 'FILETYPE=def', 'FILETYPE=imp'], targ_dir => ['', 'TARG_DIR=t/../'], ); diff --git a/Porting/makerel b/Porting/makerel index 0f94b88..a38c8f9 100755 --- a/Porting/makerel +++ b/Porting/makerel @@ -155,7 +155,6 @@ my @writables = qw( win32/Makefile win32/Makefile.ce win32/makefile.mk - win32/config_H.bc win32/config_H.gc win32/config_H.vc utils/Makefile diff --git a/README.win32 b/README.win32 index 106d699..f7549ae 100644 --- a/README.win32 +++ b/README.win32 @@ -39,7 +39,6 @@ additional software to run (other than what came with your operating system). Currently, this port is capable of using one of the following compilers on the Intel x86 architecture: - Borland C++ version 5.02 or later Microsoft Visual C++ version 6.0 or later Gcc by mingw.org gcc version 3.2 or later Gcc by mingw-w64.sf.net gcc version 4.4.3 or later @@ -62,14 +61,11 @@ that are also supported by perl's makefile. =back -The Borland C++ and Microsoft Visual C++ compilers are also now being given -away free. The Borland compiler is available as "Borland C++ Compiler Free -Command Line Tools" and is the same compiler that ships with the full -"Borland C++ Builder" product. The Microsoft compiler is available as -"Visual C++ Toolkit 2003" or "Visual C++ 2005/2008/2010 Express Edition" (and -also as part of the ".NET Framework SDK") and is the same compiler that ships -with "Visual C++ .NET 2003 Professional" or "Visual C++ 2005/2008/2010 -Professional" respectively. +The Microsoft Visual C++ compilers are also now being given away free. They are +available as "Visual C++ Toolkit 2003" or "Visual C++ 2005/2008/2010 Express +Edition" (and also as part of the ".NET Framework SDK") and are the same +compilers that ship with "Visual C++ .NET 2003 Professional" or "Visual C++ +2005/2008/2010 Professional" respectively. This port can also be built on IA64/AMD64 using: @@ -100,7 +96,7 @@ See L below for general hints about this. You need a "make" program to build the sources. If you are using Visual C++ or the Windows SDK tools, nmake will work. Builds using -the Borland compiler or gcc need dmake. +the gcc need dmake. dmake is a freely available make that has very nice macro features and parallelability. @@ -111,16 +107,6 @@ L Fetch and install dmake somewhere on your path. -There exists a minor coexistence problem with dmake and Borland C++ -compilers. Namely, if a distribution has C files named with mixed -case letters, they will be compiled into appropriate .obj-files named -with all lowercase letters, and every time dmake is invoked -to bring files up to date, it will try to recompile such files again. -For example, Tk distribution has a lot of such files, resulting in -needless recompiles every time dmake is invoked. To avoid this, you -may use the script "sync_ext.pl" after a successful build. It is -available in the win32 subdirectory of the Perl source distribution. - =item Command Shell Use the default "cmd" shell that comes with Windows. Some versions of the @@ -131,14 +117,6 @@ shell. Make sure the path to the build directory does not contain spaces. The build usually works in this circumstance, but some tests will fail. -=item Borland C++ - -If you are using the Borland compiler, you will need dmake. -(The make that Borland supplies is seriously crippled and will not -work for MakeMaker builds.) - -See L above. - =item Microsoft Visual C++ The nmake that comes with Visual C++ will suffice for building. @@ -409,20 +387,6 @@ spaces. So don't do that. If you are running the tests from a emacs shell window, you may see failures in op/stat.t. Run "dmake test-notty" in that case. -If you're using the Borland compiler, you may see a failure in op/taint.t -arising from the inability to find the Borland Runtime DLLs on the system -default path. You will need to copy the DLLs reported by the messages -from where Borland chose to install it, into the Windows system directory -(usually somewhere like C:\WINDOWS\SYSTEM32) and rerun the test. - -If you're using Borland compiler versions 5.2 and below, you may run into -problems finding the correct header files when building extensions. For -example, building the "Tk" extension may fail because both perl and Tk -contain a header file called "patchlevel.h". The latest Borland compiler -(v5.5) is free of this misbehaviour, and it even supports an -option -VI- for backward (bugward) compatibility for using the old Borland -search algorithm to locate header files. - If you run the tests on a FAT partition, you may see some failures for C related tests (I, I ...). Testing on NTFS avoids these errors. @@ -913,8 +877,6 @@ and borrowed from the Hip Communications port that was available at the time. Various people have made numerous and sundry hacks since then. -Borland support was added in 5.004_01 (Gurusamy Sarathy). - GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons). Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp). @@ -925,6 +887,6 @@ Win9x support was added in 5.6 (Benjamin Stuhl). Support for 64-bit Windows added in 5.8 (ActiveState Corp). -Last updated: 18 November 2010 +Last updated: 10 September 2011 =cut diff --git a/doio.c b/doio.c index e2c879c..4626da1 100644 --- a/doio.c +++ b/doio.c @@ -861,10 +861,7 @@ Perl_nextargv(pTHX_ register GV *gv) #ifdef HAS_FCHMOD (void)fchmod(PL_lastfd,PL_filemode); #else -# if !(defined(WIN32) && defined(__BORLANDC__)) - /* Borland runtime creates a readonly file! */ (void)PerlLIO_chmod(PL_oldname,PL_filemode); -# endif #endif if (fileuid != PL_statbuf.st_uid || filegid != PL_statbuf.st_gid) { #ifdef HAS_FCHOWN diff --git a/dosish.h b/dosish.h index 59bf122..fe8b16b 100644 --- a/dosish.h +++ b/dosish.h @@ -88,12 +88,7 @@ * information. */ #if defined(WIN64) || defined(USE_LARGE_FILES) -# if defined(__BORLANDC__) /* buk */ -# include -# define Stat_t struct stati64 -# else #define Stat_t struct _stati64 -# endif #else #if defined(UNDER_CE) #define Stat_t struct xcestat diff --git a/ext/Errno/Errno_pm.PL b/ext/Errno/Errno_pm.PL index 56bc815..7cd7a24 100644 --- a/ext/Errno/Errno_pm.PL +++ b/ext/Errno/Errno_pm.PL @@ -2,7 +2,7 @@ use ExtUtils::MakeMaker; use Config; use strict; -our $VERSION = "1.13"; +our $VERSION = "1.14"; my %err = (); my %wsa = (); @@ -184,13 +184,7 @@ sub get_files { die "Cannot exec $cpp"; } - my $pat; - if (($IsMSWin32 || $^O eq 'NetWare') and $Config{cc} =~ /^bcc/i) { - $pat = '^/\*\s+(.+)\s+\d+\s*:\s+\*/'; - } - else { - $pat = '^#\s*(?:line)?\s*\d+\s+"([^"]+)"'; - } + my $pat = '^#\s*(?:line)?\s*\d+\s+"([^"]+)"'; while() { if ($^O eq 'os2' or $IsMSWin32 or $^O eq 'NetWare') { if (/$pat/o) { diff --git a/ext/IPC-Open3/t/IPC-Open2.t b/ext/IPC-Open3/t/IPC-Open2.t index fecb209..e0be5db 100644 --- a/ext/IPC-Open3/t/IPC-Open2.t +++ b/ext/IPC-Open3/t/IPC-Open2.t @@ -4,10 +4,10 @@ use Config; BEGIN { require Test::More; if (!$Config{'d_fork'} - # open2/3 supported on win32 (but not Borland due to CRT bugs) - && (($^O ne 'MSWin32' && $^O ne 'NetWare') || $Config{'cc'} =~ /^bcc/i)) + # open2/3 supported on win32 + && $^O ne 'MSWin32' && $^O ne 'NetWare') { - Test::More->import(skip_all => 'open2/3 not available with MSWin32+Netware+cc=bcc'); + Test::More->import(skip_all => 'open2/3 not available with MSWin32+Netware'); exit 0; } # make warnings fatal diff --git a/ext/IPC-Open3/t/IPC-Open3.t b/ext/IPC-Open3/t/IPC-Open3.t index 0ecb841..7b85b82 100644 --- a/ext/IPC-Open3/t/IPC-Open3.t +++ b/ext/IPC-Open3/t/IPC-Open3.t @@ -3,8 +3,8 @@ BEGIN { require Config; import Config; if (!$Config{'d_fork'} - # open2/3 supported on win32 (but not Borland due to CRT bugs) - && (($^O ne 'MSWin32' && $^O ne 'NetWare') || $Config{'cc'} =~ /^bcc/i)) + # open2/3 supported on win32 + && $^O ne 'MSWin32' && $^O ne 'NetWare') { print "1..0\n"; exit 0; diff --git a/ext/POSIX/POSIX.xs b/ext/POSIX/POSIX.xs index 8dc1f5a..41f53d9 100644 --- a/ext/POSIX/POSIX.xs +++ b/ext/POSIX/POSIX.xs @@ -160,9 +160,6 @@ char *tzname[] = { "" , "" }; # define ttyname(a) (char*)not_here("ttyname") # define sigset_t long # define pid_t long -# ifdef __BORLANDC__ -# define tzname _tzname -# endif # ifdef _MSC_VER # define mode_t short # endif diff --git a/ext/POSIX/lib/POSIX.pm b/ext/POSIX/lib/POSIX.pm index 75785f8..149ad32 100644 --- a/ext/POSIX/lib/POSIX.pm +++ b/ext/POSIX/lib/POSIX.pm @@ -4,7 +4,7 @@ use warnings; our ($AUTOLOAD, %SIGRT); -our $VERSION = '1.25'; +our $VERSION = '1.26'; require XSLoader; diff --git a/hints/uwin.sh b/hints/uwin.sh index 9f7eb4e..0c70b52 100644 --- a/hints/uwin.sh +++ b/hints/uwin.sh @@ -46,8 +46,7 @@ # __UWIN__ added so it could be used in ext/POSIX/POSIX.xs # to protect against either tzname definition. According to Dave Korn -#dgk gcc on uwin also predefined _UWIN as does the borland and digital -#dgk mars compiler. +#dgk gcc on uwin also predefined _UWIN as does the digital mars compiler. #dgk #dgk Only ncc does not define _UWIN and this is intentional. ncc is used #dgk to build binaries that do not require the uwin runtime. diff --git a/lib/ExtUtils/t/Embed.t b/lib/ExtUtils/t/Embed.t index 2aece54..269b20a 100644 --- a/lib/ExtUtils/t/Embed.t +++ b/lib/ExtUtils/t/Embed.t @@ -20,7 +20,6 @@ $| = 1; print "1..9\n"; my $cc = $Config{'cc'}; my $cl = ($^O eq 'MSWin32' && $cc eq 'cl'); -my $borl = ($^O eq 'MSWin32' && $cc eq 'bcc32'); my $skip_exe = $^O eq 'os2' && $Config{ldflags} =~ /(? $exe); } @@ -94,9 +90,6 @@ if ($^O eq 'VMS') { if $^O eq 'os2' and $Config{ldflags} =~ /(?flags |= _F_BIN; - else - fp->flags &= ~_F_BIN; -# endif return 1; } else @@ -3241,9 +3224,7 @@ PerlIOStdio_invalidate_fileno(pTHX_ FILE *f) f->_file = -1; return 1; # elif defined(WIN32) -# if defined(__BORLANDC__) - f->fd = PerlLIO_dup(fileno(f)); -# elif defined(UNDER_CE) +# if defined(UNDER_CE) /* WIN_CE does not have access to FILE internals, it hardly has FILE structure at all */ diff --git a/t/op/taint.t b/t/op/taint.t index 02eac80..47e9303 100644 --- a/t/op/taint.t +++ b/t/op/taint.t @@ -137,22 +137,6 @@ my $TEST = 'TEST'; { $ENV{'DCL$PATH'} = '' if $Is_VMS; - if ($Is_MSWin32 && $Config{ccname} =~ /bcc32/ && ! -f 'cc3250mt.dll') { - my $bcc_dir; - foreach my $dir (split /$Config{path_sep}/, $ENV{PATH}) { - if (-f "$dir/cc3250mt.dll") { - $bcc_dir = $dir and last; - } - } - if (defined $bcc_dir) { - require File::Copy; - File::Copy::copy("$bcc_dir/cc3250mt.dll", '.') or - die "$0: failed to copy cc3250mt.dll: $!\n"; - eval q{ - END { unlink "cc3250mt.dll" } - }; - } - } $ENV{PATH} = ($Is_Cygwin) ? '/usr/bin' : ''; delete @ENV{@MoreEnv}; $ENV{TERM} = 'dumb'; diff --git a/t/win32/system.t b/t/win32/system.t index 324035b..ba09210 100644 --- a/t/win32/system.t +++ b/t/win32/system.t @@ -34,28 +34,10 @@ open(my $F, ">$testdir/$exename.c") or die "Can't create $testdir/$exename.c: $!"; print $F <<'EOT'; #include -#ifdef __BORLANDC__ -#include -#endif int main(int ac, char **av) { int i; -#ifdef __BORLANDC__ - char *s = GetCommandLine(); - int j=0; - av[0] = s; - if (s[0]=='"') { - for(;s[++j]!='"';) - ; - av[0]++; - } - else { - for(;s[++j]!=' ';) - ; - } - s[j]=0; -#endif for (i = 0; i < ac; i++) printf("[%s]", av[i]); printf("\n"); diff --git a/toke.c b/toke.c index cc09ad0..59177d6 100644 --- a/toke.c +++ b/toke.c @@ -6978,12 +6978,6 @@ Perl_yylex(pTHX) #else if (PerlLIO_setmode(PerlIO_fileno(PL_rsfp), O_TEXT) != -1) { #endif /* NETWARE */ -#ifdef PERLIO_IS_STDIO /* really? */ -# if defined(__BORLANDC__) - /* XXX see note in do_binmode() */ - ((FILE*)PL_rsfp)->flags &= ~_F_BIN; -# endif -#endif if (loc > 0) PerlIO_seek(PL_rsfp, loc, 0); } diff --git a/win32/config.bc b/win32/config.bc deleted file mode 100644 index 2dc5063..0000000 --- a/win32/config.bc +++ /dev/null @@ -1,1086 +0,0 @@ -## Configured by: ~cf_email~ -## Target system: WIN32 -Author='' -Date='$Date' -Header='' -Id='$Id' -Locker='' -Log='$Log' -RCSfile='$RCSfile' -Revision='$Revision' -Source='' -State='' -_a='.lib' -_exe='.exe' -_o='.obj' -afs='false' -afsroot='/afs' -alignbytes='8' -ansi2knr='' -aphostname='' -api_revision='~PERL_API_REVISION~' -api_subversion='~PERL_API_SUBVERSION~' -api_version='~PERL_API_VERSION~' -api_versionstring='~PERL_API_REVISION~.~PERL_API_VERSION~.~PERL_API_SUBVERSION~' -ar='tlib /P128' -archlib='~INST_TOP~~INST_VER~\lib~INST_ARCH~' -archlibexp='~INST_TOP~~INST_VER~\lib~INST_ARCH~' -archname64='' -archname='MSWin32' -archobjs='' -asctime_r_proto='0' -awk='awk' -baserev='5' -bash='' -bin='~INST_TOP~~INST_VER~\bin~INST_ARCH~' -binexp='~INST_TOP~~INST_VER~\bin~INST_ARCH~' -bison='' -byacc='byacc' -byteorder='1234' -c='' -castflags='0' -cat='type' -cc='bcc32' -cccdlflags=' ' -ccdlflags='-tWD' -ccflags='-DWIN32' -ccflags_uselargefiles='' -ccname='~cc~' -ccsymbols='' -ccversion='' -cf_by='nobody' -cf_email='nobody@no.where.net' -cf_time='' -charbits='8' -chgrp='' -chmod='' -chown='' -clocktype='clock_t' -comm='' -compress='' -contains='grep' -cp='copy' -cpio='' -cpp='cpp32 -oCON' -cpp_stuff='42' -cppccsymbols='' -cppflags='-DWIN32' -cpplast='' -cppminus='' -cpprun='cpp32 -oCON' -cppstdin='cppstdin' -cppsymbols='' -crypt_r_proto='0' -cryptlib='' -csh='undef' -ctermid_r_proto='0' -ctime_r_proto='0' -d_Gconvert='gcvt((x),(n),(b))' -d_PRIEUldbl='undef' -d_PRIFUldbl='undef' -d_PRIGUldbl='undef' -d_PRIXU64='undef' -d_PRId64='undef' -d_PRIeldbl='undef' -d_PRIfldbl='undef' -d_PRIgldbl='undef' -d_PRIi64='undef' -d_PRIo64='undef' -d_PRIu64='undef' -d_PRIx64='undef' -d_SCNfldbl='undef' -d__fwalk='undef' -d_access='define' -d_accessx='undef' -d_aintl='undef' -d_alarm='define' -d_archlib='define' -d_asctime64='undef' -d_asctime_r='undef' -d_atolf='undef' -d_atoll='undef' -d_attribute_deprecated='undef' -d_attribute_format='undef' -d_attribute_malloc='undef' -d_attribute_nonnull='undef' -d_attribute_noreturn='undef' -d_attribute_pure='undef' -d_attribute_unused='undef' -d_attribute_warn_unused_result='undef' -d_bcmp='undef' -d_bcopy='undef' -d_bsd='define' -d_bsdgetpgrp='undef' -d_bsdsetpgrp='undef' -d_builtin_choose_expr='undef' -d_builtin_expect='undef' -d_bzero='undef' -d_c99_variadic_macros='undef' -d_casti32='define' -d_castneg='define' -d_charvspr='undef' -d_chown='undef' -d_chroot='undef' -d_chsize='define' -d_class='undef' -d_clearenv='undef' -d_closedir='define' -d_cmsghdr_s='undef' -d_const='define' -d_copysignl='undef' -d_cplusplus='undef' -d_crypt='define' -d_crypt_r='undef' -d_csh='undef' -d_ctermid='undef' -d_ctermid_r='undef' -d_ctime64='undef' -d_ctime_r='undef' -d_cuserid='undef' -d_dbl_dig='define' -d_dbminitproto='undef' -d_difftime64='undef' -d_difftime='define' -d_dir_dd_fd='undef' -d_dirfd='undef' -d_dirnamlen='define' -d_dlerror='define' -d_dlopen='define' -d_dlsymun='undef' -d_dosuid='undef' -d_drand48_r='undef' -d_drand48proto='undef' -d_dup2='define' -d_eaccess='undef' -d_endgrent='undef' -d_endgrent_r='undef' -d_endhent='undef' -d_endhostent_r='undef' -d_endnent='undef' -d_endnetent_r='undef' -d_endpent='undef' -d_endprotoent_r='undef' -d_endpwent='undef' -d_endpwent_r='undef' -d_endsent='undef' -d_endservent_r='undef' -d_eofnblk='define' -d_eunice='undef' -d_faststdio='define' -d_fchdir='undef' -d_fchmod='undef' -d_fchown='undef' -d_fcntl_can_lock='undef' -d_fcntl='undef' -d_fd_macros='define' -d_fd_set='define' -d_fds_bits='define' -d_fgetpos='define' -d_finitel='undef' -d_finite='undef' -d_flexfnam='define' -d_flock='define' -d_flockproto='define' -d_fork='undef' -d_fp_class='undef' -d_fpathconf='undef' -d_fpclass='undef' -d_fpclassify='undef' -d_fpclassl='undef' -d_fpos64_t='undef' -d_frexpl='undef' -d_fs_data_s='undef' -d_fseeko='undef' -d_fsetpos='define' -d_fstatfs='undef' -d_fstatvfs='undef' -d_fsync='undef' -d_ftello='undef' -d_ftime='define' -d_futimes='undef' -d_gdbm_ndbm_h_uses_prototypes='undef' -d_gdbmndbm_h_uses_prototypes='undef' -d_getaddrinfo='undef' -d_getcwd='define' -d_getespwnam='undef' -d_getfsstat='undef' -d_getgrent='undef' -d_getgrent_r='undef' -d_getgrgid_r='undef' -d_getgrnam_r='undef' -d_getgrps='undef' -d_gethbyaddr='define' -d_gethbyname='define' -d_gethent='undef' -d_gethname='define' -d_gethostbyaddr_r='undef' -d_gethostbyname_r='undef' -d_gethostent_r='undef' -d_gethostprotos='define' -d_getitimer='undef' -d_getlogin='define' -d_getlogin_r='undef' -d_getmnt='undef' -d_getmntent='undef' -d_getnameinfo='undef' -d_getnbyaddr='undef' -d_getnbyname='undef' -d_getnent='undef' -d_getnetbyaddr_r='undef' -d_getnetbyname_r='undef' -d_getnetent_r='undef' -d_getnetprotos='undef' -d_getpagsz='undef' -d_getpbyname='define' -d_getpbynumber='define' -d_getpent='undef' -d_getpgid='undef' -d_getpgrp2='undef' -d_getpgrp='undef' -d_getppid='undef' -d_getprior='undef' -d_getprotobyname_r='undef' -d_getprotobynumber_r='undef' -d_getprotoent_r='undef' -d_getprotoprotos='define' -d_getprpwnam='undef' -d_getpwent='undef' -d_getpwent_r='undef' -d_getpwnam_r='undef' -d_getpwuid_r='undef' -d_getsbyname='define' -d_getsbyport='define' -d_getsent='undef' -d_getservbyname_r='undef' -d_getservbyport_r='undef' -d_getservent_r='undef' -d_getservprotos='define' -d_getspnam='undef' -d_getspnam_r='undef' -d_gettimeod='define' -d_gmtime64='undef' -d_gmtime_r='undef' -d_gnulibc='undef' -d_grpasswd='undef' -d_hasmntopt='undef' -d_htonl='define' -d_ilogbl='undef' -d_inc_version_list='undef' -d_index='undef' -d_inetaton='undef' -d_inetntop='undef' -d_inetpton='undef' -d_int64_t='undef' -d_isascii='define' -d_isfinite='undef' -d_isinf='undef' -d_isnan='define' -d_isnanl='undef' -d_killpg='define' -d_lchown='undef' -d_ldbl_dig='define' -d_libm_lib_version='undef' -d_link='define' -d_localtime64='undef' -d_localtime_r='undef' -d_localtime_r_needs_tzset='undef' -d_locconv='define' -d_lockf='undef' -d_longdbl='define' -d_longlong='undef' -d_lseekproto='define' -d_lstat='undef' -d_madvise='undef' -d_malloc_good_size='undef' -d_malloc_size='undef' -d_mblen='define' -d_mbstowcs='define' -d_mbtowc='define' -d_memchr='define' -d_memcmp='define' -d_memcpy='define' -d_memmove='define' -d_memset='define' -d_mkdir='define' -d_mkdtemp='undef' -d_mkfifo='undef' -d_mkstemp='undef' -d_mkstemps='undef' -d_mktime64='undef' -d_mktime='define' -d_mmap='undef' -d_modfl='undef' -d_modfl_pow32_bug='undef' -d_modflproto='undef' -d_mprotect='undef' -d_msgctl='undef' -d_msg_ctrunc='undef' -d_msg_dontroute='undef' -d_msgget='undef' -d_msghdr_s='undef' -d_msg_oob='undef' -d_msg_peek='undef' -d_msg_proxy='undef' -d_msgrcv='undef' -d_msgsnd='undef' -d_msg='undef' -d_msync='undef' -d_munmap='undef' -d_mymalloc='undef' -d_ndbm='undef' -d_ndbm_h_uses_prototypes='undef' -d_nice='undef' -d_nl_langinfo='undef' -d_nv_preserves_uv='define' -d_nv_zero_is_allbits_zero='define' -d_off64_t='undef' -d_old_pthread_create_joinable='undef' -d_oldpthreads='undef' -d_oldsock='undef' -d_open3='undef' -d_pathconf='undef' -d_pause='define' -d_perl_otherlibdirs='undef' -d_phostname='undef' -d_pipe='define' -d_poll='undef' -d_portable='define' -d_prctl='undef' -d_prctl_set_name='undef' -d_printf_format_null='undef' -d_procselfexe='undef' -d_pseudofork='undef' -d_pthread_atfork='undef' -d_pthread_attr_setscope='undef' -d_pthread_yield='undef' -d_pwage='undef' -d_pwchange='undef' -d_pwclass='undef' -d_pwcomment='undef' -d_pwexpire='undef' -d_pwgecos='undef' -d_pwpasswd='undef' -d_pwquota='undef' -d_qgcvt='undef' -d_quad='define' -d_random_r='undef' -d_readdir64_r='undef' -d_readdir='define' -d_readdir_r='undef' -d_readlink='undef' -d_readv='undef' -d_recvmsg='undef' -d_rename='define' -d_rewinddir='define' -d_rmdir='define' -d_safebcpy='undef' -d_safemcpy='undef' -d_sanemcmp='define' -d_sbrkproto='undef' -d_scalbnl='undef' -d_sched_yield='undef' -d_scm_rights='undef' -d_seekdir='define' -d_select='define' -d_sem='undef' -d_semctl='undef' -d_semctl_semid_ds='undef' -d_semctl_semun='undef' -d_semget='undef' -d_semop='undef' -d_sendmsg='undef' -d_setegid='undef' -d_seteuid='undef' -d_setgrent='undef' -d_setgrent_r='undef' -d_setgrps='undef' -d_sethent='undef' -d_sethostent_r='undef' -d_setitimer='undef' -d_setlinebuf='undef' -d_setlocale='define' -d_setlocale_r='undef' -d_setnent='undef' -d_setnetent_r='undef' -d_setpent='undef' -d_setpgid='undef' -d_setpgrp2='undef' -d_setpgrp='undef' -d_setprior='undef' -d_setproctitle='undef' -d_setprotoent_r='undef' -d_setpwent='undef' -d_setpwent_r='undef' -d_setregid='undef' -d_setresgid='undef' -d_setresuid='undef' -d_setreuid='undef' -d_setrgid='undef' -d_setruid='undef' -d_setsent='undef' -d_setservent_r='undef' -d_setsid='undef' -d_setvbuf='define' -d_sfio='undef' -d_shm='undef' -d_shmat='undef' -d_shmatprototype='undef' -d_shmctl='undef' -d_shmdt='undef' -d_shmget='undef' -d_sigaction='undef' -d_signbit='undef' -d_sigprocmask='undef' -d_sigsetjmp='undef' -d_sin6_scope_id='define' -d_sitearch='define' -d_snprintf='define' -d_sockaddr_sa_len='undef' -d_sockatmark='undef' -d_sockatmarkproto='undef' -d_socket='define' -d_socklen_t='undef' -d_sockpair='undef' -d_socks5_init='undef' -d_sprintf_returns_strlen='define' -d_sqrtl='undef' -d_srand48_r='undef' -d_srandom_r='undef' -d_sresgproto='undef' -d_sresuproto='undef' -d_statblks='undef' -d_static_inline='undef' -d_statfs_f_flags='undef' -d_statfs_s='undef' -d_statvfs='undef' -d_stdio_cnt_lval='define' -d_stdio_ptr_lval='define' -d_stdio_ptr_lval_nochange_cnt='define' -d_stdio_ptr_lval_sets_cnt='undef' -d_stdio_stream_array='undef' -d_stdiobase='define' -d_stdstdio='define' -d_strchr='define' -d_strcoll='define' -d_strctcpy='define' -d_strerrm='strerror(e)' -d_strerror='define' -d_strerror_r='undef' -d_strftime='define' -d_strlcat='undef' -d_strlcpy='undef' -d_strtod='define' -d_strtol='define' -d_strtold='undef' -d_strtoll='undef' -d_strtoq='undef' -d_strtoul='define' -d_strtoull='undef' -d_strtouq='undef' -d_strxfrm='define' -d_suidsafe='undef' -d_symlink='undef' -d_syscall='undef' -d_syscallproto='undef' -d_sysconf='undef' -d_sysernlst='' -d_syserrlst='define' -d_system='define' -d_tcgetpgrp='undef' -d_tcsetpgrp='undef' -d_telldir='define' -d_telldirproto='define' -d_time='define' -d_timegm='undef' -d_times='define' -d_tm_tm_gmtoff='undef' -d_tm_tm_zone='undef' -d_tmpnam_r='undef' -d_truncate='undef' -d_ttyname_r='undef' -d_tzname='define' -d_u32align='define' -d_ualarm='undef' -d_umask='define' -d_uname='define' -d_union_semun='define' -d_unordered='undef' -d_unsetenv='undef' -d_usleep='undef' -d_usleepproto='undef' -d_ustat='undef' -d_vendorarch='undef' -d_vendorbin='undef' -d_vendorlib='undef' -d_vendorscript='undef' -d_vfork='undef' -d_void_closedir='undef' -d_voidsig='define' -d_voidtty='' -d_volatile='define' -d_vprintf='define' -d_vsnprintf='define' -d_wait4='undef' -d_waitpid='define' -d_wcstombs='define' -d_wctomb='define' -d_writev='undef' -d_xenix='undef' -date='date' -db_hashtype='int' -db_prefixtype='int' -db_version_major='0' -db_version_minor='0' -db_version_patch='0' -defvoidused='15' -direntrytype='struct direct' -dlext='dll' -dlsrc='dl_win32.xs' -doublesize='8' -drand01='(rand()/(double)((unsigned)1< - * or defines the symbol DBL_DIG, which is the number - * of significant digits in a double precision number. If this - * symbol is not defined, a guess of 15 is usually pretty good. - */ -#define HAS_DBL_DIG /**/ - -/* HAS_DIFFTIME: - * This symbol, if defined, indicates that the difftime routine is - * available. - */ -#define HAS_DIFFTIME /**/ - -/* HAS_DLERROR: - * This symbol, if defined, indicates that the dlerror routine is - * available to return a string describing the last error that - * occurred from a call to dlopen(), dlclose() or dlsym(). - */ -#define HAS_DLERROR /**/ - -/* HAS_DUP2: - * This symbol, if defined, indicates that the dup2 routine is - * available to duplicate file descriptors. - */ -#define HAS_DUP2 /**/ - -/* HAS_FCHMOD: - * This symbol, if defined, indicates that the fchmod routine is available - * to change mode of opened files. If unavailable, use chmod(). - */ -/*#define HAS_FCHMOD / **/ - -/* HAS_FCHOWN: - * This symbol, if defined, indicates that the fchown routine is available - * to change ownership of opened files. If unavailable, use chown(). - */ -/*#define HAS_FCHOWN / **/ - -/* HAS_FCNTL: - * This symbol, if defined, indicates to the C program that - * the fcntl() function exists. - */ -/*#define HAS_FCNTL / **/ - -/* HAS_FGETPOS: - * This symbol, if defined, indicates that the fgetpos routine is - * available to get the file position indicator, similar to ftell(). - */ -#define HAS_FGETPOS /**/ - -/* HAS_FLOCK: - * This symbol, if defined, indicates that the flock routine is - * available to do file locking. - */ -#define HAS_FLOCK /**/ - -/* HAS_FORK: - * This symbol, if defined, indicates that the fork routine is - * available. - */ -/*#define HAS_FORK / **/ - -/* HAS_FSETPOS: - * This symbol, if defined, indicates that the fsetpos routine is - * available to set the file position indicator, similar to fseek(). - */ -#define HAS_FSETPOS /**/ - -/* HAS_GETTIMEOFDAY: - * This symbol, if defined, indicates that the gettimeofday() system - * call is available for a sub-second accuracy clock. Usually, the file - * needs to be included (see I_SYS_RESOURCE). - * The type "Timeval" should be used to refer to "struct timeval". - */ -#define HAS_GETTIMEOFDAY /**/ -#ifdef HAS_GETTIMEOFDAY -#define Timeval struct timeval /* Structure used by gettimeofday() */ -#endif - -/* HAS_GETGROUPS: - * This symbol, if defined, indicates that the getgroups() routine is - * available to get the list of process groups. If unavailable, multiple - * groups are probably not supported. - */ -/*#define HAS_GETGROUPS / **/ - -/* HAS_GETLOGIN: - * This symbol, if defined, indicates that the getlogin routine is - * available to get the login name. - */ -#define HAS_GETLOGIN /**/ - -/* HAS_GETPGID: - * This symbol, if defined, indicates to the C program that - * the getpgid(pid) function is available to get the - * process group id. - */ -/*#define HAS_GETPGID / **/ - -/* HAS_GETPGRP2: - * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) - * routine is available to get the current process group. - */ -/*#define HAS_GETPGRP2 / **/ - -/* HAS_GETPPID: - * This symbol, if defined, indicates that the getppid routine is - * available to get the parent process ID. - */ -/*#define HAS_GETPPID / **/ - -/* HAS_GETPRIORITY: - * This symbol, if defined, indicates that the getpriority routine is - * available to get a process's priority. - */ -/*#define HAS_GETPRIORITY / **/ - -/* HAS_INET_ATON: - * This symbol, if defined, indicates to the C program that the - * inet_aton() function is available to parse IP address "dotted-quad" - * strings. - */ -/*#define HAS_INET_ATON / **/ - -/* HAS_KILLPG: - * This symbol, if defined, indicates that the killpg routine is available - * to kill process groups. If unavailable, you probably should use kill - * with a negative process number. - */ -#define HAS_KILLPG /**/ - -/* HAS_LINK: - * This symbol, if defined, indicates that the link routine is - * available to create hard links. - */ -#define HAS_LINK /**/ - -/* HAS_LOCALECONV: - * This symbol, if defined, indicates that the localeconv routine is - * available for numeric and monetary formatting conventions. - */ -#define HAS_LOCALECONV /**/ - -/* HAS_LOCKF: - * This symbol, if defined, indicates that the lockf routine is - * available to do file locking. - */ -/*#define HAS_LOCKF / **/ - -/* HAS_LSTAT: - * This symbol, if defined, indicates that the lstat routine is - * available to do file stats on symbolic links. - */ -/*#define HAS_LSTAT / **/ - -/* HAS_MBLEN: - * This symbol, if defined, indicates that the mblen routine is available - * to find the number of bytes in a multibye character. - */ -#define HAS_MBLEN /**/ - -/* HAS_MBSTOWCS: - * This symbol, if defined, indicates that the mbstowcs routine is - * available to covert a multibyte string into a wide character string. - */ -#define HAS_MBSTOWCS /**/ - -/* HAS_MBTOWC: - * This symbol, if defined, indicates that the mbtowc routine is available - * to covert a multibyte to a wide character. - */ -#define HAS_MBTOWC /**/ - -/* HAS_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * to compare blocks of memory. - */ -#define HAS_MEMCMP /**/ - -/* HAS_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy blocks of memory. - */ -#define HAS_MEMCPY /**/ - -/* HAS_MEMMOVE: - * This symbol, if defined, indicates that the memmove routine is available - * to copy potentially overlapping blocks of memory. This should be used - * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your - * own version. - */ -#define HAS_MEMMOVE /**/ - -/* HAS_MEMSET: - * This symbol, if defined, indicates that the memset routine is available - * to set blocks of memory. - */ -#define HAS_MEMSET /**/ - -/* HAS_MKDIR: - * This symbol, if defined, indicates that the mkdir routine is available - * to create directories. Otherwise you should fork off a new process to - * exec /bin/mkdir. - */ -#define HAS_MKDIR /**/ - -/* HAS_MKFIFO: - * This symbol, if defined, indicates that the mkfifo routine is - * available to create FIFOs. Otherwise, mknod should be able to - * do it for you. However, if mkfifo is there, mknod might require - * super-user privileges which mkfifo will not. - */ -/*#define HAS_MKFIFO / **/ - -/* HAS_MKTIME: - * This symbol, if defined, indicates that the mktime routine is - * available. - */ -#define HAS_MKTIME /**/ - -/* HAS_MSYNC: - * This symbol, if defined, indicates that the msync system call is - * available to synchronize a mapped file. - */ -/*#define HAS_MSYNC / **/ - -/* HAS_MUNMAP: - * This symbol, if defined, indicates that the munmap system call is - * available to unmap a region, usually mapped by mmap(). - */ -/*#define HAS_MUNMAP / **/ - -/* HAS_NICE: - * This symbol, if defined, indicates that the nice routine is - * available. - */ -/*#define HAS_NICE / **/ - -/* HAS_PATHCONF: - * This symbol, if defined, indicates that pathconf() is available - * to determine file-system related limits and options associated - * with a given filename. - */ -/* HAS_FPATHCONF: - * This symbol, if defined, indicates that pathconf() is available - * to determine file-system related limits and options associated - * with a given open file descriptor. - */ -/*#define HAS_PATHCONF / **/ -/*#define HAS_FPATHCONF / **/ - -/* HAS_PAUSE: - * This symbol, if defined, indicates that the pause routine is - * available to suspend a process until a signal is received. - */ -#define HAS_PAUSE /**/ - -/* HAS_PIPE: - * This symbol, if defined, indicates that the pipe routine is - * available to create an inter-process channel. - */ -#define HAS_PIPE /**/ - -/* HAS_POLL: - * This symbol, if defined, indicates that the poll routine is - * available to poll active file descriptors. Please check I_POLL and - * I_SYS_POLL to know which header should be included as well. - */ -/*#define HAS_POLL / **/ - -/* HAS_READDIR: - * This symbol, if defined, indicates that the readdir routine is - * available to read directory entries. You may have to include - * . See I_DIRENT. - */ -#define HAS_READDIR /**/ - -/* HAS_SEEKDIR: - * This symbol, if defined, indicates that the seekdir routine is - * available. You may have to include . See I_DIRENT. - */ -#define HAS_SEEKDIR /**/ - -/* HAS_TELLDIR: - * This symbol, if defined, indicates that the telldir routine is - * available. You may have to include . See I_DIRENT. - */ -#define HAS_TELLDIR /**/ - -/* HAS_REWINDDIR: - * This symbol, if defined, indicates that the rewinddir routine is - * available. You may have to include . See I_DIRENT. - */ -#define HAS_REWINDDIR /**/ - -/* HAS_READLINK: - * This symbol, if defined, indicates that the readlink routine is - * available to read the value of a symbolic link. - */ -/*#define HAS_READLINK / **/ - -/* HAS_RENAME: - * This symbol, if defined, indicates that the rename routine is available - * to rename files. Otherwise you should do the unlink(), link(), unlink() - * trick. - */ -#define HAS_RENAME /**/ - -/* HAS_RMDIR: - * This symbol, if defined, indicates that the rmdir routine is - * available to remove directories. Otherwise you should fork off a - * new process to exec /bin/rmdir. - */ -#define HAS_RMDIR /**/ - -/* HAS_SELECT: - * This symbol, if defined, indicates that the select routine is - * available to select active file descriptors. If the timeout field - * is used, may need to be included. - */ -#define HAS_SELECT /**/ - -/* HAS_SETEGID: - * This symbol, if defined, indicates that the setegid routine is available - * to change the effective gid of the current program. - */ -/*#define HAS_SETEGID / **/ - -/* HAS_SETEUID: - * This symbol, if defined, indicates that the seteuid routine is available - * to change the effective uid of the current program. - */ -/*#define HAS_SETEUID / **/ - -/* HAS_SETGROUPS: - * This symbol, if defined, indicates that the setgroups() routine is - * available to set the list of process groups. If unavailable, multiple - * groups are probably not supported. - */ -/*#define HAS_SETGROUPS / **/ - -/* HAS_SETLINEBUF: - * This symbol, if defined, indicates that the setlinebuf routine is - * available to change stderr or stdout from block-buffered or unbuffered - * to a line-buffered mode. - */ -/*#define HAS_SETLINEBUF / **/ - -/* HAS_SETLOCALE: - * This symbol, if defined, indicates that the setlocale routine is - * available to handle locale-specific ctype implementations. - */ -#define HAS_SETLOCALE /**/ - -/* HAS_SETPGID: - * This symbol, if defined, indicates that the setpgid(pid, gpid) - * routine is available to set process group ID. - */ -/*#define HAS_SETPGID / **/ - -/* HAS_SETPGRP2: - * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) - * routine is available to set the current process group. - */ -/*#define HAS_SETPGRP2 / **/ - -/* HAS_SETPRIORITY: - * This symbol, if defined, indicates that the setpriority routine is - * available to set a process's priority. - */ -/*#define HAS_SETPRIORITY / **/ - -/* HAS_SETREGID: - * This symbol, if defined, indicates that the setregid routine is - * available to change the real and effective gid of the current - * process. - */ -/* HAS_SETRESGID: - * This symbol, if defined, indicates that the setresgid routine is - * available to change the real, effective and saved gid of the current - * process. - */ -/*#define HAS_SETREGID / **/ -/*#define HAS_SETRESGID / **/ - -/* HAS_SETREUID: - * This symbol, if defined, indicates that the setreuid routine is - * available to change the real and effective uid of the current - * process. - */ -/* HAS_SETRESUID: - * This symbol, if defined, indicates that the setresuid routine is - * available to change the real, effective and saved uid of the current - * process. - */ -/*#define HAS_SETREUID / **/ -/*#define HAS_SETRESUID / **/ - -/* HAS_SETRGID: - * This symbol, if defined, indicates that the setrgid routine is available - * to change the real gid of the current program. - */ -/*#define HAS_SETRGID / **/ - -/* HAS_SETRUID: - * This symbol, if defined, indicates that the setruid routine is available - * to change the real uid of the current program. - */ -/*#define HAS_SETRUID / **/ - -/* HAS_SETSID: - * This symbol, if defined, indicates that the setsid routine is - * available to set the process group ID. - */ -/*#define HAS_SETSID / **/ - -/* HAS_STRCHR: - * This symbol is defined to indicate that the strchr()/strrchr() - * functions are available for string searching. If not, try the - * index()/rindex() pair. - */ -/* HAS_INDEX: - * This symbol is defined to indicate that the index()/rindex() - * functions are available for string searching. - */ -#define HAS_STRCHR /**/ -/*#define HAS_INDEX / **/ - -/* HAS_STRCOLL: - * This symbol, if defined, indicates that the strcoll routine is - * available to compare strings using collating information. - */ -#define HAS_STRCOLL /**/ - -/* HAS_STRTOD: - * This symbol, if defined, indicates that the strtod routine is - * available to provide better numeric string conversion than atof(). - */ -#define HAS_STRTOD /**/ - -/* HAS_STRTOL: - * This symbol, if defined, indicates that the strtol routine is available - * to provide better numeric string conversion than atoi() and friends. - */ -#define HAS_STRTOL /**/ - -/* HAS_STRXFRM: - * This symbol, if defined, indicates that the strxfrm() routine is - * available to transform strings. - */ -#define HAS_STRXFRM /**/ - -/* HAS_SYMLINK: - * This symbol, if defined, indicates that the symlink routine is available - * to create symbolic links. - */ -/*#define HAS_SYMLINK / **/ - -/* HAS_SYSCALL: - * This symbol, if defined, indicates that the syscall routine is - * available to call arbitrary system calls. If undefined, that's tough. - */ -/*#define HAS_SYSCALL / **/ - -/* HAS_SYSCONF: - * This symbol, if defined, indicates that sysconf() is available - * to determine system related limits and options. - */ -/*#define HAS_SYSCONF / **/ - -/* HAS_SYSTEM: - * This symbol, if defined, indicates that the system routine is - * available to issue a shell command. - */ -#define HAS_SYSTEM /**/ - -/* HAS_TCGETPGRP: - * This symbol, if defined, indicates that the tcgetpgrp routine is - * available to get foreground process group ID. - */ -/*#define HAS_TCGETPGRP / **/ - -/* HAS_TCSETPGRP: - * This symbol, if defined, indicates that the tcsetpgrp routine is - * available to set foreground process group ID. - */ -/*#define HAS_TCSETPGRP / **/ - -/* HAS_TRUNCATE: - * This symbol, if defined, indicates that the truncate routine is - * available to truncate files. - */ -/*#define HAS_TRUNCATE / **/ - -/* HAS_TZNAME: - * This symbol, if defined, indicates that the tzname[] array is - * available to access timezone names. - */ -#define HAS_TZNAME /**/ - -/* HAS_UMASK: - * This symbol, if defined, indicates that the umask routine is - * available to set and get the value of the file creation mask. - */ -#define HAS_UMASK /**/ - -/* HAS_USLEEP: - * This symbol, if defined, indicates that the usleep routine is - * available to let the process sleep on a sub-second accuracy. - */ -/*#define HAS_USLEEP / **/ - -/* HAS_WAIT4: - * This symbol, if defined, indicates that wait4() exists. - */ -/*#define HAS_WAIT4 / **/ - -/* HAS_WAITPID: - * This symbol, if defined, indicates that the waitpid routine is - * available to wait for child process. - */ -#define HAS_WAITPID /**/ - -/* HAS_WCSTOMBS: - * This symbol, if defined, indicates that the wcstombs routine is - * available to convert wide character strings to multibyte strings. - */ -#define HAS_WCSTOMBS /**/ - -/* HAS_WCTOMB: - * This symbol, if defined, indicates that the wctomb routine is available - * to covert a wide character to a multibyte. - */ -#define HAS_WCTOMB /**/ - -/* Groups_t: - * This symbol holds the type used for the second argument to - * getgroups() and setgroups(). Usually, this is the same as - * gidtype (gid_t) , but sometimes it isn't. - * It can be int, ushort, gid_t, etc... - * It may be necessary to include to get any - * typedef'ed information. This is only required if you have - * getgroups() or setgroups().. - */ -#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) -#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */ -#endif - -/* I_ARPA_INET: - * This symbol, if defined, indicates to the C program that it should - * include to get inet_addr and friends declarations. - */ -#define I_ARPA_INET /**/ - -/* I_DBM: - * This symbol, if defined, indicates that exists and should - * be included. - */ -/* I_RPCSVC_DBM: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_DBM / **/ -#define I_RPCSVC_DBM /**/ - -/* I_DLFCN: - * This symbol, if defined, indicates that exists and should - * be included. - */ -#define I_DLFCN /**/ - -/* I_FCNTL: - * This manifest constant tells the C program to include . - */ -#define I_FCNTL /**/ - -/* I_FLOAT: - * This symbol, if defined, indicates to the C program that it should - * include to get definition of symbols like DBL_MAX or - * DBL_MIN, i.e. machine dependent floating point values. - */ -#define I_FLOAT /**/ - -/* I_GDBM: - * This symbol, if defined, indicates that exists and should - * be included. - */ -/*#define I_GDBM / **/ - -/* I_LIMITS: - * This symbol, if defined, indicates to the C program that it should - * include to get definition of symbols like WORD_BIT or - * LONG_MAX, i.e. machine dependant limitations. - */ -#define I_LIMITS /**/ - -/* I_LOCALE: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#define I_LOCALE /**/ - -/* I_MATH: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#define I_MATH /**/ - -/* I_MEMORY: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_MEMORY / **/ - -/* I_NETINET_IN: - * This symbol, if defined, indicates to the C program that it should - * include . Otherwise, you may try . - */ -/*#define I_NETINET_IN / **/ - -/* I_SFIO: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_SFIO / **/ - -/* I_STDDEF: - * This symbol, if defined, indicates that exists and should - * be included. - */ -#define I_STDDEF /**/ - -/* I_STDLIB: - * This symbol, if defined, indicates that exists and should - * be included. - */ -#define I_STDLIB /**/ - -/* I_STRING: - * This symbol, if defined, indicates to the C program that it should - * include (USG systems) instead of (BSD systems). - */ -#define I_STRING /**/ - -/* I_SYS_DIR: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_SYS_DIR / **/ - -/* I_SYS_FILE: - * This symbol, if defined, indicates to the C program that it should - * include to get definition of R_OK and friends. - */ -/*#define I_SYS_FILE / **/ - -/* I_SYS_IOCTL: - * This symbol, if defined, indicates that exists and should - * be included. Otherwise, include or . - */ -/* I_SYS_SOCKIO: - * This symbol, if defined, indicates the should be included - * to get socket ioctl options, like SIOCATMARK. - */ -/*#define I_SYS_IOCTL / **/ -/*#define I_SYS_SOCKIO / **/ - -/* I_SYS_NDIR: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_SYS_NDIR / **/ - -/* I_SYS_PARAM: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_SYS_PARAM / **/ - -/* I_SYS_POLL: - * This symbol, if defined, indicates that the program may include - * . When I_POLL is also defined, it's probably safest - * to only include . - */ -/*#define I_SYS_POLL / **/ - -/* I_SYS_RESOURCE: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_SYS_RESOURCE / **/ - -/* I_SYS_SELECT: - * This symbol, if defined, indicates to the C program that it should - * include in order to get definition of struct timeval. - */ -/*#define I_SYS_SELECT / **/ - -/* I_SYS_STAT: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#define I_SYS_STAT /**/ - -/* I_SYS_TIMES: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_SYS_TIMES / **/ - -/* I_SYS_TYPES: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#define I_SYS_TYPES /**/ - -/* I_SYS_UN: - * This symbol, if defined, indicates to the C program that it should - * include to get UNIX domain socket definitions. - */ -/*#define I_SYS_UN / **/ - -/* I_SYS_WAIT: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_SYS_WAIT / **/ - -/* I_TERMIO: - * This symbol, if defined, indicates that the program should include - * rather than . There are also differences in - * the ioctl() calls that depend on the value of this symbol. - */ -/* I_TERMIOS: - * This symbol, if defined, indicates that the program should include - * the POSIX termios.h rather than sgtty.h or termio.h. - * There are also differences in the ioctl() calls that depend on the - * value of this symbol. - */ -/* I_SGTTY: - * This symbol, if defined, indicates that the program should include - * rather than . There are also differences in - * the ioctl() calls that depend on the value of this symbol. - */ -/*#define I_TERMIO / **/ -/*#define I_TERMIOS / **/ -/*#define I_SGTTY / **/ - -/* I_UNISTD: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_UNISTD / **/ - -/* I_UTIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#define I_UTIME /**/ - -/* I_VALUES: - * This symbol, if defined, indicates to the C program that it should - * include to get definition of symbols like MINFLOAT or - * MAXLONG, i.e. machine dependant limitations. Probably, you - * should use instead, if it is available. - */ -/*#define I_VALUES / **/ - -/* I_VFORK: - * This symbol, if defined, indicates to the C program that it should - * include vfork.h. - */ -/*#define I_VFORK / **/ - -/* CAN_VAPROTO: - * This variable is defined on systems supporting prototype declaration - * of functions with a variable number of arguments. - */ -/* _V: - * This macro is used to declare function parameters in prototypes for - * functions with a variable number of parameters. Use double parentheses. - * For example: - * - * int printf _V((char *fmt, ...)); - * - * Remember to use the plain simple _() macro when declaring a function - * with no variable number of arguments, since it might be possible to - * have a non-effect _V() macro and still get prototypes via _(). - */ -/*#define CAN_VAPROTO / **/ -#ifdef CAN_VAPROTO -#define _V(args) args -#else -#define _V(args) () -#endif - -/* INTSIZE: - * This symbol contains the value of sizeof(int) so that the C - * preprocessor can make decisions based on it. - */ -/* LONGSIZE: - * This symbol contains the value of sizeof(long) so that the C - * preprocessor can make decisions based on it. - */ -/* SHORTSIZE: - * This symbol contains the value of sizeof(short) so that the C - * preprocessor can make decisions based on it. - */ -#define INTSIZE 4 /**/ -#define LONGSIZE 4 /**/ -#define SHORTSIZE 2 /**/ - -/* MULTIARCH: - * This symbol, if defined, signifies that the build - * process will produce some binary files that are going to be - * used in a cross-platform environment. This is the case for - * example with the NeXT "fat" binaries that contain executables - * for several CPUs. - */ -/*#define MULTIARCH / **/ - -/* HAS_QUAD: - * This symbol, if defined, tells that there's a 64-bit integer type, - * Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one - * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, QUAD_IS_INT64_T, - * or QUAD_IS___INT64. - */ -#define HAS_QUAD /**/ -#ifdef HAS_QUAD -# define Quad_t __int64 /**/ -# define Uquad_t unsigned __int64 /**/ -# define QUADKIND 5 /**/ -# define QUAD_IS_INT 1 -# define QUAD_IS_LONG 2 -# define QUAD_IS_LONG_LONG 3 -# define QUAD_IS_INT64_T 4 -# define QUAD_IS___INT64 5 -#endif - -/* USE_CROSS_COMPILE: - * This symbol, if defined, indicates that Perl is being cross-compiled. - */ -/* PERL_TARGETARCH: - * This symbol, if defined, indicates the target architecture - * Perl has been cross-compiled to. Undefined if not a cross-compile. - */ -#ifndef USE_CROSS_COMPILE -/*#define USE_CROSS_COMPILE / **/ -#define PERL_TARGETARCH "" /**/ -#endif - -/* MEM_ALIGNBYTES: - * This symbol contains the number of bytes required to align a - * double, or a long double when applicable. Usual values are 2, - * 4 and 8. The default is eight, for safety. - */ -#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) -# define MEM_ALIGNBYTES 8 -#else -#define MEM_ALIGNBYTES 8 -#endif - -/* ARCHLIB: - * This variable, if defined, holds the name of the directory in - * which the user wants to put architecture-dependent public - * library files for perl5. It is most often a local directory - * such as /usr/local/lib. Programs using this variable must be - * prepared to deal with filename expansion. If ARCHLIB is the - * same as PRIVLIB, it is not defined, since presumably the - * program already searches PRIVLIB. - */ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define ARCHLIB "c:\\perl\\lib" /**/ -/*#define ARCHLIB_EXP "" / **/ - -/* ARCHNAME: - * This symbol holds a string representing the architecture name. - * It may be used to construct an architecture-dependant pathname - * where library files may be held under a private library, for - * instance. - */ -#define ARCHNAME "MSWin32-x86" /**/ - -/* BIN: - * This symbol holds the path of the bin directory where the package will - * be installed. Program must be prepared to deal with ~name substitution. - */ -/* BIN_EXP: - * This symbol is the filename expanded version of the BIN symbol, for - * programs that do not want to deal with that at run-time. - */ -/* PERL_RELOCATABLE_INC: - * This symbol, if defined, indicates that we'd like to relocate entries - * in @INC at run time based on the location of the perl binary. - */ -#define BIN "c:\\perl\\bin" /**/ -#define BIN_EXP "c:\\perl\\bin" /**/ -#define PERL_RELOCATABLE_INC "undef" /**/ - -/* BYTEORDER: - * This symbol holds the hexadecimal constant defined in byteorder, - * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc... - * If the compiler supports cross-compiling or multiple-architecture - * binaries (eg. on NeXT systems), use compiler-defined macros to - * determine the byte order. - * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture - * Binaries (MAB) on either big endian or little endian machines. - * The endian-ness is available at compile-time. This only matters - * for perl, where the config.h can be generated and installed on - * one system, and used by a different architecture to build an - * extension. Older versions of NeXT that might not have - * defined either *_ENDIAN__ were all on Motorola 680x0 series, - * so the default case (for NeXT) is big endian to catch them. - * This might matter for NeXT 3.0. - */ -#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) -# ifdef __LITTLE_ENDIAN__ -# if LONGSIZE == 4 -# define BYTEORDER 0x1234 -# else -# if LONGSIZE == 8 -# define BYTEORDER 0x12345678 -# endif -# endif -# else -# ifdef __BIG_ENDIAN__ -# if LONGSIZE == 4 -# define BYTEORDER 0x4321 -# else -# if LONGSIZE == 8 -# define BYTEORDER 0x87654321 -# endif -# endif -# endif -# endif -# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) -# define BYTEORDER 0x4321 -# endif -#else -#define BYTEORDER 0x1234 /* large digits for MSB */ -#endif /* NeXT */ - -/* CHARBITS: - * This symbol contains the size of a char, so that the C preprocessor - * can make decisions based on it. - */ -#define CHARBITS 8 /**/ - -/* HAS_ACCESSX: - * This symbol, if defined, indicates that the accessx routine is - * available to do extended access checks. - */ -/*#define HAS_ACCESSX / **/ - -/* HAS_ASCTIME_R: - * This symbol, if defined, indicates that the asctime_r routine - * is available to asctime re-entrantly. - */ -/* ASCTIME_R_PROTO: - * This symbol encodes the prototype of asctime_r. - * It is zero if d_asctime_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r - * is defined. - */ -/*#define HAS_ASCTIME_R / **/ -#define ASCTIME_R_PROTO 0 /**/ - -/* CASTI32: - * This symbol is defined if the C compiler can cast negative - * or large floating point numbers to 32-bit ints. - */ -#define CASTI32 /**/ - -/* CASTNEGFLOAT: - * This symbol is defined if the C compiler can cast negative - * numbers to unsigned longs, ints and shorts. - */ -/* CASTFLAGS: - * This symbol contains flags that say what difficulties the compiler - * has casting odd floating values to unsigned long: - * 0 = ok - * 1 = couldn't cast < 0 - * 2 = couldn't cast >= 0x80000000 - * 4 = couldn't cast in argument expression list - */ -#define CASTNEGFLOAT /**/ -#define CASTFLAGS 0 /**/ - -/* VOID_CLOSEDIR: - * This symbol, if defined, indicates that the closedir() routine - * does not return a value. - */ -/*#define VOID_CLOSEDIR / **/ - -/* HAS_CRYPT_R: - * This symbol, if defined, indicates that the crypt_r routine - * is available to crypt re-entrantly. - */ -/* CRYPT_R_PROTO: - * This symbol encodes the prototype of crypt_r. - * It is zero if d_crypt_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r - * is defined. - */ -/*#define HAS_CRYPT_R / **/ -#define CRYPT_R_PROTO 0 /**/ - -/* HAS_CTERMID_R: - * This symbol, if defined, indicates that the ctermid_r routine - * is available to ctermid re-entrantly. - */ -/* CTERMID_R_PROTO: - * This symbol encodes the prototype of ctermid_r. - * It is zero if d_ctermid_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r - * is defined. - */ -/*#define HAS_CTERMID_R / **/ -#define CTERMID_R_PROTO 0 /**/ - -/* HAS_CTIME_R: - * This symbol, if defined, indicates that the ctime_r routine - * is available to ctime re-entrantly. - */ -/* CTIME_R_PROTO: - * This symbol encodes the prototype of ctime_r. - * It is zero if d_ctime_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r - * is defined. - */ -/*#define HAS_CTIME_R / **/ -#define CTIME_R_PROTO 0 /**/ - -/* HAS_DRAND48_R: - * This symbol, if defined, indicates that the drand48_r routine - * is available to drand48 re-entrantly. - */ -/* DRAND48_R_PROTO: - * This symbol encodes the prototype of drand48_r. - * It is zero if d_drand48_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r - * is defined. - */ -/*#define HAS_DRAND48_R / **/ -#define DRAND48_R_PROTO 0 /**/ - -/* HAS_EACCESS: - * This symbol, if defined, indicates that the eaccess routine is - * available to do extended access checks. - */ -/*#define HAS_EACCESS / **/ - -/* HAS_ENDGRENT_R: - * This symbol, if defined, indicates that the endgrent_r routine - * is available to endgrent re-entrantly. - */ -/* ENDGRENT_R_PROTO: - * This symbol encodes the prototype of endgrent_r. - * It is zero if d_endgrent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r - * is defined. - */ -/*#define HAS_ENDGRENT_R / **/ -#define ENDGRENT_R_PROTO 0 /**/ - -/* HAS_ENDHOSTENT_R: - * This symbol, if defined, indicates that the endhostent_r routine - * is available to endhostent re-entrantly. - */ -/* ENDHOSTENT_R_PROTO: - * This symbol encodes the prototype of endhostent_r. - * It is zero if d_endhostent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r - * is defined. - */ -/*#define HAS_ENDHOSTENT_R / **/ -#define ENDHOSTENT_R_PROTO 0 /**/ - -/* HAS_ENDNETENT_R: - * This symbol, if defined, indicates that the endnetent_r routine - * is available to endnetent re-entrantly. - */ -/* ENDNETENT_R_PROTO: - * This symbol encodes the prototype of endnetent_r. - * It is zero if d_endnetent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r - * is defined. - */ -/*#define HAS_ENDNETENT_R / **/ -#define ENDNETENT_R_PROTO 0 /**/ - -/* HAS_ENDPROTOENT_R: - * This symbol, if defined, indicates that the endprotoent_r routine - * is available to endprotoent re-entrantly. - */ -/* ENDPROTOENT_R_PROTO: - * This symbol encodes the prototype of endprotoent_r. - * It is zero if d_endprotoent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r - * is defined. - */ -/*#define HAS_ENDPROTOENT_R / **/ -#define ENDPROTOENT_R_PROTO 0 /**/ - -/* HAS_ENDPWENT_R: - * This symbol, if defined, indicates that the endpwent_r routine - * is available to endpwent re-entrantly. - */ -/* ENDPWENT_R_PROTO: - * This symbol encodes the prototype of endpwent_r. - * It is zero if d_endpwent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r - * is defined. - */ -/*#define HAS_ENDPWENT_R / **/ -#define ENDPWENT_R_PROTO 0 /**/ - -/* HAS_ENDSERVENT_R: - * This symbol, if defined, indicates that the endservent_r routine - * is available to endservent re-entrantly. - */ -/* ENDSERVENT_R_PROTO: - * This symbol encodes the prototype of endservent_r. - * It is zero if d_endservent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r - * is defined. - */ -/*#define HAS_ENDSERVENT_R / **/ -#define ENDSERVENT_R_PROTO 0 /**/ - -/* HAS_FD_SET: - * This symbol, when defined, indicates presence of the fd_set typedef - * in - */ -#define HAS_FD_SET /**/ - -/* Gconvert: - * This preprocessor macro is defined to convert a floating point - * number to a string without a trailing decimal point. This - * emulates the behavior of sprintf("%g"), but is sometimes much more - * efficient. If gconvert() is not available, but gcvt() drops the - * trailing decimal point, then gcvt() is used. If all else fails, - * a macro using sprintf("%g") is used. Arguments for the Gconvert - * macro are: value, number of digits, whether trailing zeros should - * be retained, and the output buffer. - * The usual values are: - * d_Gconvert='gconvert((x),(n),(t),(b))' - * d_Gconvert='gcvt((x),(n),(b))' - * d_Gconvert='sprintf((b),"%.*g",(n),(x))' - * The last two assume trailing zeros should not be kept. - */ -#define Gconvert(x,n,t,b) gcvt((x),(n),(b)) - -/* HAS_GETGRENT_R: - * This symbol, if defined, indicates that the getgrent_r routine - * is available to getgrent re-entrantly. - */ -/* GETGRENT_R_PROTO: - * This symbol encodes the prototype of getgrent_r. - * It is zero if d_getgrent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r - * is defined. - */ -/*#define HAS_GETGRENT_R / **/ -#define GETGRENT_R_PROTO 0 /**/ - -/* HAS_GETGRGID_R: - * This symbol, if defined, indicates that the getgrgid_r routine - * is available to getgrgid re-entrantly. - */ -/* GETGRGID_R_PROTO: - * This symbol encodes the prototype of getgrgid_r. - * It is zero if d_getgrgid_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r - * is defined. - */ -/*#define HAS_GETGRGID_R / **/ -#define GETGRGID_R_PROTO 0 /**/ - -/* HAS_GETGRNAM_R: - * This symbol, if defined, indicates that the getgrnam_r routine - * is available to getgrnam re-entrantly. - */ -/* GETGRNAM_R_PROTO: - * This symbol encodes the prototype of getgrnam_r. - * It is zero if d_getgrnam_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r - * is defined. - */ -/*#define HAS_GETGRNAM_R / **/ -#define GETGRNAM_R_PROTO 0 /**/ - -/* HAS_GETHOSTBYADDR_R: - * This symbol, if defined, indicates that the gethostbyaddr_r routine - * is available to gethostbyaddr re-entrantly. - */ -/* GETHOSTBYADDR_R_PROTO: - * This symbol encodes the prototype of gethostbyaddr_r. - * It is zero if d_gethostbyaddr_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r - * is defined. - */ -/*#define HAS_GETHOSTBYADDR_R / **/ -#define GETHOSTBYADDR_R_PROTO 0 /**/ - -/* HAS_GETHOSTBYNAME_R: - * This symbol, if defined, indicates that the gethostbyname_r routine - * is available to gethostbyname re-entrantly. - */ -/* GETHOSTBYNAME_R_PROTO: - * This symbol encodes the prototype of gethostbyname_r. - * It is zero if d_gethostbyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r - * is defined. - */ -/*#define HAS_GETHOSTBYNAME_R / **/ -#define GETHOSTBYNAME_R_PROTO 0 /**/ - -/* HAS_GETHOSTENT_R: - * This symbol, if defined, indicates that the gethostent_r routine - * is available to gethostent re-entrantly. - */ -/* GETHOSTENT_R_PROTO: - * This symbol encodes the prototype of gethostent_r. - * It is zero if d_gethostent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r - * is defined. - */ -/*#define HAS_GETHOSTENT_R / **/ -#define GETHOSTENT_R_PROTO 0 /**/ - -/* HAS_GETLOGIN_R: - * This symbol, if defined, indicates that the getlogin_r routine - * is available to getlogin re-entrantly. - */ -/* GETLOGIN_R_PROTO: - * This symbol encodes the prototype of getlogin_r. - * It is zero if d_getlogin_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r - * is defined. - */ -/*#define HAS_GETLOGIN_R / **/ -#define GETLOGIN_R_PROTO 0 /**/ - -/* HAS_GETNETBYADDR_R: - * This symbol, if defined, indicates that the getnetbyaddr_r routine - * is available to getnetbyaddr re-entrantly. - */ -/* GETNETBYADDR_R_PROTO: - * This symbol encodes the prototype of getnetbyaddr_r. - * It is zero if d_getnetbyaddr_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r - * is defined. - */ -/*#define HAS_GETNETBYADDR_R / **/ -#define GETNETBYADDR_R_PROTO 0 /**/ - -/* HAS_GETNETBYNAME_R: - * This symbol, if defined, indicates that the getnetbyname_r routine - * is available to getnetbyname re-entrantly. - */ -/* GETNETBYNAME_R_PROTO: - * This symbol encodes the prototype of getnetbyname_r. - * It is zero if d_getnetbyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r - * is defined. - */ -/*#define HAS_GETNETBYNAME_R / **/ -#define GETNETBYNAME_R_PROTO 0 /**/ - -/* HAS_GETNETENT_R: - * This symbol, if defined, indicates that the getnetent_r routine - * is available to getnetent re-entrantly. - */ -/* GETNETENT_R_PROTO: - * This symbol encodes the prototype of getnetent_r. - * It is zero if d_getnetent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r - * is defined. - */ -/*#define HAS_GETNETENT_R / **/ -#define GETNETENT_R_PROTO 0 /**/ - -/* HAS_GETPAGESIZE: - * This symbol, if defined, indicates that the getpagesize system call - * is available to get system page size, which is the granularity of - * many memory management calls. - */ -/*#define HAS_GETPAGESIZE / **/ - -/* HAS_GETPROTOBYNAME_R: - * This symbol, if defined, indicates that the getprotobyname_r routine - * is available to getprotobyname re-entrantly. - */ -/* GETPROTOBYNAME_R_PROTO: - * This symbol encodes the prototype of getprotobyname_r. - * It is zero if d_getprotobyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r - * is defined. - */ -/*#define HAS_GETPROTOBYNAME_R / **/ -#define GETPROTOBYNAME_R_PROTO 0 /**/ - -/* HAS_GETPROTOBYNUMBER_R: - * This symbol, if defined, indicates that the getprotobynumber_r routine - * is available to getprotobynumber re-entrantly. - */ -/* GETPROTOBYNUMBER_R_PROTO: - * This symbol encodes the prototype of getprotobynumber_r. - * It is zero if d_getprotobynumber_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r - * is defined. - */ -/*#define HAS_GETPROTOBYNUMBER_R / **/ -#define GETPROTOBYNUMBER_R_PROTO 0 /**/ - -/* HAS_GETPROTOENT_R: - * This symbol, if defined, indicates that the getprotoent_r routine - * is available to getprotoent re-entrantly. - */ -/* GETPROTOENT_R_PROTO: - * This symbol encodes the prototype of getprotoent_r. - * It is zero if d_getprotoent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r - * is defined. - */ -/*#define HAS_GETPROTOENT_R / **/ -#define GETPROTOENT_R_PROTO 0 /**/ - -/* HAS_GETPWENT_R: - * This symbol, if defined, indicates that the getpwent_r routine - * is available to getpwent re-entrantly. - */ -/* GETPWENT_R_PROTO: - * This symbol encodes the prototype of getpwent_r. - * It is zero if d_getpwent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r - * is defined. - */ -/*#define HAS_GETPWENT_R / **/ -#define GETPWENT_R_PROTO 0 /**/ - -/* HAS_GETPWNAM_R: - * This symbol, if defined, indicates that the getpwnam_r routine - * is available to getpwnam re-entrantly. - */ -/* GETPWNAM_R_PROTO: - * This symbol encodes the prototype of getpwnam_r. - * It is zero if d_getpwnam_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r - * is defined. - */ -/*#define HAS_GETPWNAM_R / **/ -#define GETPWNAM_R_PROTO 0 /**/ - -/* HAS_GETPWUID_R: - * This symbol, if defined, indicates that the getpwuid_r routine - * is available to getpwuid re-entrantly. - */ -/* GETPWUID_R_PROTO: - * This symbol encodes the prototype of getpwuid_r. - * It is zero if d_getpwuid_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r - * is defined. - */ -/*#define HAS_GETPWUID_R / **/ -#define GETPWUID_R_PROTO 0 /**/ - -/* HAS_GETSERVBYNAME_R: - * This symbol, if defined, indicates that the getservbyname_r routine - * is available to getservbyname re-entrantly. - */ -/* GETSERVBYNAME_R_PROTO: - * This symbol encodes the prototype of getservbyname_r. - * It is zero if d_getservbyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r - * is defined. - */ -/*#define HAS_GETSERVBYNAME_R / **/ -#define GETSERVBYNAME_R_PROTO 0 /**/ - -/* HAS_GETSERVBYPORT_R: - * This symbol, if defined, indicates that the getservbyport_r routine - * is available to getservbyport re-entrantly. - */ -/* GETSERVBYPORT_R_PROTO: - * This symbol encodes the prototype of getservbyport_r. - * It is zero if d_getservbyport_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r - * is defined. - */ -/*#define HAS_GETSERVBYPORT_R / **/ -#define GETSERVBYPORT_R_PROTO 0 /**/ - -/* HAS_GETSERVENT_R: - * This symbol, if defined, indicates that the getservent_r routine - * is available to getservent re-entrantly. - */ -/* GETSERVENT_R_PROTO: - * This symbol encodes the prototype of getservent_r. - * It is zero if d_getservent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r - * is defined. - */ -/*#define HAS_GETSERVENT_R / **/ -#define GETSERVENT_R_PROTO 0 /**/ - -/* HAS_GETSPNAM_R: - * This symbol, if defined, indicates that the getspnam_r routine - * is available to getspnam re-entrantly. - */ -/* GETSPNAM_R_PROTO: - * This symbol encodes the prototype of getspnam_r. - * It is zero if d_getspnam_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r - * is defined. - */ -/*#define HAS_GETSPNAM_R / **/ -#define GETSPNAM_R_PROTO 0 /**/ - -/* HAS_GMTIME_R: - * This symbol, if defined, indicates that the gmtime_r routine - * is available to gmtime re-entrantly. - */ -/* GMTIME_R_PROTO: - * This symbol encodes the prototype of gmtime_r. - * It is zero if d_gmtime_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r - * is defined. - */ -/*#define HAS_GMTIME_R / **/ -#define GMTIME_R_PROTO 0 /**/ - -/* HAS_GNULIBC: - * This symbol, if defined, indicates to the C program that - * the GNU C library is being used. A better check is to use - * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc. - */ -/*#define HAS_GNULIBC / **/ -#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) -# define _GNU_SOURCE -#endif - -/* HAS_ISASCII: - * This manifest constant lets the C program know that isascii - * is available. - */ -#define HAS_ISASCII /**/ - -/* HAS_LCHOWN: - * This symbol, if defined, indicates that the lchown routine is - * available to operate on a symbolic link (instead of following the - * link). - */ -/*#define HAS_LCHOWN / **/ - -/* HAS_LOCALTIME_R: - * This symbol, if defined, indicates that the localtime_r routine - * is available to localtime re-entrantly. - */ -/* LOCALTIME_R_NEEDS_TZSET: - * Many libc's localtime_r implementations do not call tzset, - * making them differ from localtime(), and making timezone - * changes using \undef{TZ} without explicitly calling tzset - * impossible. This symbol makes us call tzset before localtime_r - */ -/*#define LOCALTIME_R_NEEDS_TZSET / **/ -#ifdef LOCALTIME_R_NEEDS_TZSET -#define L_R_TZSET tzset(), -#else -#define L_R_TZSET -#endif - -/* LOCALTIME_R_PROTO: - * This symbol encodes the prototype of localtime_r. - * It is zero if d_localtime_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r - * is defined. - */ -/*#define HAS_LOCALTIME_R / **/ -#define LOCALTIME_R_PROTO 0 /**/ - -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. - */ -/*#define HAS_OPEN3 / **/ - -/* OLD_PTHREAD_CREATE_JOINABLE: - * This symbol, if defined, indicates how to create pthread - * in joinable (aka undetached) state. NOTE: not defined - * if pthread.h already has defined PTHREAD_CREATE_JOINABLE - * (the new version of the constant). - * If defined, known values are PTHREAD_CREATE_UNDETACHED - * and __UNDETACHED. - */ -/*#define OLD_PTHREAD_CREATE_JOINABLE / **/ - -/* HAS_PTHREAD_ATFORK: - * This symbol, if defined, indicates that the pthread_atfork routine - * is available to setup fork handlers. - */ -/*#define HAS_PTHREAD_ATFORK / **/ - -/* HAS_PTHREAD_YIELD: - * This symbol, if defined, indicates that the pthread_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/* SCHED_YIELD: - * This symbol defines the way to yield the execution of - * the current thread. Known ways are sched_yield, - * pthread_yield, and pthread_yield with NULL. - */ -/* HAS_SCHED_YIELD: - * This symbol, if defined, indicates that the sched_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/*#define HAS_PTHREAD_YIELD / **/ -#define SCHED_YIELD /**/ -/*#define HAS_SCHED_YIELD / **/ - -/* HAS_RANDOM_R: - * This symbol, if defined, indicates that the random_r routine - * is available to random re-entrantly. - */ -/* RANDOM_R_PROTO: - * This symbol encodes the prototype of random_r. - * It is zero if d_random_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r - * is defined. - */ -/*#define HAS_RANDOM_R / **/ -#define RANDOM_R_PROTO 0 /**/ - -/* HAS_READDIR64_R: - * This symbol, if defined, indicates that the readdir64_r routine - * is available to readdir64 re-entrantly. - */ -/* READDIR64_R_PROTO: - * This symbol encodes the prototype of readdir64_r. - * It is zero if d_readdir64_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r - * is defined. - */ -/*#define HAS_READDIR64_R / **/ -#define READDIR64_R_PROTO 0 /**/ - -/* HAS_READDIR_R: - * This symbol, if defined, indicates that the readdir_r routine - * is available to readdir re-entrantly. - */ -/* READDIR_R_PROTO: - * This symbol encodes the prototype of readdir_r. - * It is zero if d_readdir_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r - * is defined. - */ -/*#define HAS_READDIR_R / **/ -#define READDIR_R_PROTO 0 /**/ - -/* HAS_SAFE_BCOPY: - * This symbol, if defined, indicates that the bcopy routine is available - * to copy potentially overlapping memory blocks. Normally, you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -/*#define HAS_SAFE_BCOPY / **/ - -/* HAS_SAFE_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy potentially overlapping memory blocks. If you need to - * copy overlapping memory blocks, you should check HAS_MEMMOVE and - * use memmove() instead, if available. - */ -/*#define HAS_SAFE_MEMCPY / **/ - -/* HAS_SANE_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * and can be used to compare relative magnitudes of chars with their high - * bits set. If it is not defined, roll your own version. - */ -#define HAS_SANE_MEMCMP /**/ - -/* HAS_SETGRENT_R: - * This symbol, if defined, indicates that the setgrent_r routine - * is available to setgrent re-entrantly. - */ -/* SETGRENT_R_PROTO: - * This symbol encodes the prototype of setgrent_r. - * It is zero if d_setgrent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r - * is defined. - */ -/*#define HAS_SETGRENT_R / **/ -#define SETGRENT_R_PROTO 0 /**/ - -/* HAS_SETHOSTENT_R: - * This symbol, if defined, indicates that the sethostent_r routine - * is available to sethostent re-entrantly. - */ -/* SETHOSTENT_R_PROTO: - * This symbol encodes the prototype of sethostent_r. - * It is zero if d_sethostent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r - * is defined. - */ -/*#define HAS_SETHOSTENT_R / **/ -#define SETHOSTENT_R_PROTO 0 /**/ - -/* HAS_SETLOCALE_R: - * This symbol, if defined, indicates that the setlocale_r routine - * is available to setlocale re-entrantly. - */ -/* SETLOCALE_R_PROTO: - * This symbol encodes the prototype of setlocale_r. - * It is zero if d_setlocale_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r - * is defined. - */ -/*#define HAS_SETLOCALE_R / **/ -#define SETLOCALE_R_PROTO 0 /**/ - -/* HAS_SETNETENT_R: - * This symbol, if defined, indicates that the setnetent_r routine - * is available to setnetent re-entrantly. - */ -/* SETNETENT_R_PROTO: - * This symbol encodes the prototype of setnetent_r. - * It is zero if d_setnetent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r - * is defined. - */ -/*#define HAS_SETNETENT_R / **/ -#define SETNETENT_R_PROTO 0 /**/ - -/* HAS_SETPROTOENT_R: - * This symbol, if defined, indicates that the setprotoent_r routine - * is available to setprotoent re-entrantly. - */ -/* SETPROTOENT_R_PROTO: - * This symbol encodes the prototype of setprotoent_r. - * It is zero if d_setprotoent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r - * is defined. - */ -/*#define HAS_SETPROTOENT_R / **/ -#define SETPROTOENT_R_PROTO 0 /**/ - -/* HAS_SETPWENT_R: - * This symbol, if defined, indicates that the setpwent_r routine - * is available to setpwent re-entrantly. - */ -/* SETPWENT_R_PROTO: - * This symbol encodes the prototype of setpwent_r. - * It is zero if d_setpwent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r - * is defined. - */ -/*#define HAS_SETPWENT_R / **/ -#define SETPWENT_R_PROTO 0 /**/ - -/* HAS_SETSERVENT_R: - * This symbol, if defined, indicates that the setservent_r routine - * is available to setservent re-entrantly. - */ -/* SETSERVENT_R_PROTO: - * This symbol encodes the prototype of setservent_r. - * It is zero if d_setservent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r - * is defined. - */ -/*#define HAS_SETSERVENT_R / **/ -#define SETSERVENT_R_PROTO 0 /**/ - -/* HAS_SIGACTION: - * This symbol, if defined, indicates that Vr4's sigaction() routine - * is available. - */ -/*#define HAS_SIGACTION / **/ - -/* HAS_SIGSETJMP: - * This variable indicates to the C program that the sigsetjmp() - * routine is available to save the calling process's registers - * and stack environment for later use by siglongjmp(), and - * to optionally save the process's signal mask. See - * Sigjmp_buf, Sigsetjmp, and Siglongjmp. - */ -/* Sigjmp_buf: - * This is the buffer type to be used with Sigsetjmp and Siglongjmp. - */ -/* Sigsetjmp: - * This macro is used in the same way as sigsetjmp(), but will invoke - * traditional setjmp() if sigsetjmp isn't available. - * See HAS_SIGSETJMP. - */ -/* Siglongjmp: - * This macro is used in the same way as siglongjmp(), but will invoke - * traditional longjmp() if siglongjmp isn't available. - * See HAS_SIGSETJMP. - */ -/*#define HAS_SIGSETJMP / **/ -#ifdef HAS_SIGSETJMP -#define Sigjmp_buf sigjmp_buf -#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) -#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) -#else -#define Sigjmp_buf jmp_buf -#define Sigsetjmp(buf,save_mask) setjmp((buf)) -#define Siglongjmp(buf,retval) longjmp((buf),(retval)) -#endif - -/* HAS_SRAND48_R: - * This symbol, if defined, indicates that the srand48_r routine - * is available to srand48 re-entrantly. - */ -/* SRAND48_R_PROTO: - * This symbol encodes the prototype of srand48_r. - * It is zero if d_srand48_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r - * is defined. - */ -/*#define HAS_SRAND48_R / **/ -#define SRAND48_R_PROTO 0 /**/ - -/* HAS_SRANDOM_R: - * This symbol, if defined, indicates that the srandom_r routine - * is available to srandom re-entrantly. - */ -/* SRANDOM_R_PROTO: - * This symbol encodes the prototype of srandom_r. - * It is zero if d_srandom_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r - * is defined. - */ -/*#define HAS_SRANDOM_R / **/ -#define SRANDOM_R_PROTO 0 /**/ - -/* USE_STDIO_PTR: - * This symbol is defined if the _ptr and _cnt fields (or similar) - * of the stdio FILE structure can be used to access the stdio buffer - * for a file handle. If this is defined, then the FILE_ptr(fp) - * and FILE_cnt(fp) macros will also be defined and should be used - * to access these fields. - */ -/* FILE_ptr: - * This macro is used to access the _ptr field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_PTR_LVALUE: - * This symbol is defined if the FILE_ptr macro can be used as an - * lvalue. - */ -/* FILE_cnt: - * This macro is used to access the _cnt field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_CNT_LVALUE: - * This symbol is defined if the FILE_cnt macro can be used as an - * lvalue. - */ -/* STDIO_PTR_LVAL_SETS_CNT: - * This symbol is defined if using the FILE_ptr macro as an lvalue - * to increase the pointer by n has the side effect of decreasing the - * value of File_cnt(fp) by n. - */ -/* STDIO_PTR_LVAL_NOCHANGE_CNT: - * This symbol is defined if using the FILE_ptr macro as an lvalue - * to increase the pointer by n leaves File_cnt(fp) unchanged. - */ -#define USE_STDIO_PTR /**/ -#ifdef USE_STDIO_PTR -#define FILE_ptr(fp) ((fp)->curp) -#define STDIO_PTR_LVALUE /**/ -#define FILE_cnt(fp) ((fp)->level) -#define STDIO_CNT_LVALUE /**/ -/*#define STDIO_PTR_LVAL_SETS_CNT / **/ -#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/ -#endif - -/* USE_STDIO_BASE: - * This symbol is defined if the _base field (or similar) of the - * stdio FILE structure can be used to access the stdio buffer for - * a file handle. If this is defined, then the FILE_base(fp) macro - * will also be defined and should be used to access this field. - * Also, the FILE_bufsiz(fp) macro will be defined and should be used - * to determine the number of bytes in the buffer. USE_STDIO_BASE - * will never be defined unless USE_STDIO_PTR is. - */ -/* FILE_base: - * This macro is used to access the _base field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_BASE is defined. - */ -/* FILE_bufsiz: - * This macro is used to determine the number of bytes in the I/O - * buffer pointed to by _base field (or equivalent) of the FILE - * structure pointed to its argument. This macro will always be defined - * if USE_STDIO_BASE is defined. - */ -#define USE_STDIO_BASE /**/ -#ifdef USE_STDIO_BASE -#define FILE_base(fp) ((fp)->buffer) -#define FILE_bufsiz(fp) ((fp)->level + (fp)->curp - (fp)->buffer) -#endif - -/* HAS_STRERROR_R: - * This symbol, if defined, indicates that the strerror_r routine - * is available to strerror re-entrantly. - */ -/* STRERROR_R_PROTO: - * This symbol encodes the prototype of strerror_r. - * It is zero if d_strerror_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r - * is defined. - */ -/*#define HAS_STRERROR_R / **/ -#define STRERROR_R_PROTO 0 /**/ - -/* HAS_TMPNAM_R: - * This symbol, if defined, indicates that the tmpnam_r routine - * is available to tmpnam re-entrantly. - */ -/* TMPNAM_R_PROTO: - * This symbol encodes the prototype of tmpnam_r. - * It is zero if d_tmpnam_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r - * is defined. - */ -/*#define HAS_TMPNAM_R / **/ -#define TMPNAM_R_PROTO 0 /**/ - -/* HAS_TTYNAME_R: - * This symbol, if defined, indicates that the ttyname_r routine - * is available to ttyname re-entrantly. - */ -/* TTYNAME_R_PROTO: - * This symbol encodes the prototype of ttyname_r. - * It is zero if d_ttyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r - * is defined. - */ -/*#define HAS_TTYNAME_R / **/ -#define TTYNAME_R_PROTO 0 /**/ - -/* HAS_VPRINTF: - * This symbol, if defined, indicates that the vprintf routine is available - * to printf with a pointer to an argument list. If unavailable, you - * may need to write your own, probably in terms of _doprnt(). - */ -/* USE_CHAR_VSPRINTF: - * This symbol is defined if this system has vsprintf() returning type - * (char*). The trend seems to be to declare it as "int vsprintf()". It - * is up to the package author to declare vsprintf correctly based on the - * symbol. - */ -#define HAS_VPRINTF /**/ -/*#define USE_CHAR_VSPRINTF / **/ - -/* DOUBLESIZE: - * This symbol contains the size of a double, so that the C preprocessor - * can make decisions based on it. - */ -#define DOUBLESIZE 8 /**/ - -/* I_MACH_CTHREADS: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_MACH_CTHREADS / **/ - -/* I_PTHREAD: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_PTHREAD / **/ - -/* I_SYS_ACCESS: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_SYS_ACCESS / **/ - -/* I_SYS_SECURITY: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_SYS_SECURITY / **/ - -/* I_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME_KERNEL: - * This symbol, if defined, indicates to the C program that it should - * include with KERNEL defined. - */ -/* HAS_TM_TM_ZONE: - * This symbol, if defined, indicates to the C program that - * the struct tm has a tm_zone field. - */ -/* HAS_TM_TM_GMTOFF: - * This symbol, if defined, indicates to the C program that - * the struct tm has a tm_gmtoff field. - */ -#define I_TIME /**/ -/*#define I_SYS_TIME / **/ -/*#define I_SYS_TIME_KERNEL / **/ -/*#define HAS_TM_TM_ZONE / **/ -/*#define HAS_TM_TM_GMTOFF / **/ - -/* PERL_INC_VERSION_LIST: - * This variable specifies the list of subdirectories in over - * which perl.c:incpush() and lib/lib.pm will automatically - * search when adding directories to @INC, in a format suitable - * for a C initialization string. See the inc_version_list entry - * in Porting/Glossary for more details. - */ -/*#define PERL_INC_VERSION_LIST 0 / **/ - -/* INSTALL_USR_BIN_PERL: - * This symbol, if defined, indicates that Perl is to be installed - * also as /usr/bin/perl. - */ -/*#define INSTALL_USR_BIN_PERL / **/ - -/* VAL_O_NONBLOCK: - * This symbol is to be used during open() or fcntl(F_SETFL) to turn on - * non-blocking I/O for the file descriptor. Note that there is no way - * back, i.e. you cannot turn it blocking again this way. If you wish to - * alternatively switch between blocking and non-blocking, use the - * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. - */ -/* VAL_EAGAIN: - * This symbol holds the errno error code set by read() when no data was - * present on the non-blocking file descriptor. - */ -/* RD_NODATA: - * This symbol holds the return code from read() when no data is present - * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is - * not defined, then you can't distinguish between no data and EOF by - * issuing a read(). You'll have to find another way to tell for sure! - */ -/* EOF_NONBLOCK: - * This symbol, if defined, indicates to the C program that a read() on - * a non-blocking file descriptor will return 0 on EOF, and not the value - * held in RD_NODATA (-1 usually, in that case!). - */ -#define VAL_O_NONBLOCK O_NONBLOCK -#define VAL_EAGAIN EAGAIN -#define RD_NODATA -1 -#define EOF_NONBLOCK - -/* PERL_OTHERLIBDIRS: - * This variable contains a colon-separated set of paths for the perl - * binary to search for additional library files or modules. - * These directories will be tacked to the end of @INC. - * Perl will automatically search below each path for version- - * and architecture-specific directories. See PERL_INC_VERSION_LIST - * for more details. - */ -/*#define PERL_OTHERLIBDIRS "" / **/ - -/* PRIVLIB: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - */ -/* PRIVLIB_EXP: - * This symbol contains the ~name expanded version of PRIVLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define PRIVLIB "c:\\perl\\lib" /**/ -#define PRIVLIB_EXP (win32_get_privlib(PERL_VERSION_STRING, NULL)) /**/ - -/* PTRSIZE: - * This symbol contains the size of a pointer, so that the C preprocessor - * can make decisions based on it. It will be sizeof(void *) if - * the compiler supports (void *); otherwise it will be - * sizeof(char *). - */ -#define PTRSIZE 4 /**/ - -/* Drand01: - * This macro is to be used to generate uniformly distributed - * random numbers over the range [0., 1.[. You may have to supply - * an 'extern double drand48();' in your program since SunOS 4.1.3 - * doesn't provide you with anything relevant in its headers. - * See HAS_DRAND48_PROTO. - */ -/* Rand_seed_t: - * This symbol defines the type of the argument of the - * random seed function. - */ -/* seedDrand01: - * This symbol defines the macro to be used in seeding the - * random number generator (see Drand01). - */ -/* RANDBITS: - * This symbol indicates how many bits are produced by the - * function used to generate normalized random numbers. - * Values include 15, 16, 31, and 48. - */ -#define Drand01() (rand()/(double)((unsigned)1< or - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). - */ -#define SSize_t int /* signed count of bytes */ - -/* USE_ITHREADS: - * This symbol, if defined, indicates that Perl should be built to - * use the interpreter-based threading implementation. - */ -/* USE_5005THREADS: - * This symbol, if defined, indicates that Perl should be built to - * use the 5.005-based threading implementation. - * Only valid up to 5.8.x. - */ -/* OLD_PTHREADS_API: - * This symbol, if defined, indicates that Perl should - * be built to use the old draft POSIX threads API. - */ -/* USE_REENTRANT_API: - * This symbol, if defined, indicates that Perl should - * try to use the various _r versions of library functions. - * This is extremely experimental. - */ -/*#define USE_5005THREADS / **/ -/*#define USE_ITHREADS / **/ -#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) -#define USE_THREADS /* until src is revised*/ -#endif -/*#define OLD_PTHREADS_API / **/ -/*#define USE_REENTRANT_API / **/ - -/* PERL_VENDORARCH: - * If defined, this symbol contains the name of a private library. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. - * It may have a ~ on the front. - * The standard distribution will put nothing in this directory. - * Vendors who distribute perl may wish to place their own - * architecture-dependent modules and extensions in this directory with - * MakeMaker Makefile.PL INSTALLDIRS=vendor - * or equivalent. See INSTALL for details. - */ -/* PERL_VENDORARCH_EXP: - * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/*#define PERL_VENDORARCH "" / **/ -/*#define PERL_VENDORARCH_EXP "" / **/ - -/* PERL_VENDORLIB_EXP: - * This symbol contains the ~name expanded version of VENDORLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/* PERL_VENDORLIB_STEM: - * This define is PERL_VENDORLIB_EXP with any trailing version-specific component - * removed. The elements in inc_version_list (inc_version_list.U) can - * be tacked onto this variable to generate a list of directories to search. - */ -/*#define PERL_VENDORLIB_EXP "" / **/ -/*#define PERL_VENDORLIB_STEM "" / **/ - -/* HAS_STATIC_INLINE: - * This symbol, if defined, indicates that the C compiler supports - * C99-style static inline. That is, the function can't be called - * from another translation unit. - */ -/* PERL_STATIC_INLINE: - * This symbol gives the best-guess incantation to use for static - * inline functions. If HAS_STATIC_INLINE is defined, this will - * give C99-style inline. If HAS_STATIC_INLINE is not defined, - * this will give a plain 'static'. It will always be defined - * to something that gives static linkage. - * Possibilities include - * static inline (c99) - * static __inline__ (gcc -ansi) - * static __inline (MSVC) - * static _inline (older MSVC) - * static (c89 compilers) - */ -/*#define HAS_STATIC_INLINE / **/ -#define PERL_STATIC_INLINE static /**/ - -/* EBCDIC: - * This symbol, if defined, indicates that this system uses - * EBCDIC encoding. - */ -/*#define EBCDIC / **/ - -/* OSNAME: - * This symbol contains the name of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. - */ -/* OSVERS: - * This symbol contains the version of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. - */ -#define OSNAME "MSWin32" /**/ -#define OSVERS "5.1" /**/ - -/* CAT2: - * This macro concatenates 2 tokens together. - */ -/* STRINGIFY: - * This macro surrounds its token with double quotes. - */ -#if 42 == 1 -#define CAT2(a,b) a/**/b -#define STRINGIFY(a) "a" -#endif -#if 42 == 42 -#define PeRl_CaTiFy(a, b) a ## b -#define PeRl_StGiFy(a) #a -#define CAT2(a,b) PeRl_CaTiFy(a,b) -#define StGiFy(a) PeRl_StGiFy(a) -#define STRINGIFY(a) PeRl_StGiFy(a) -#endif -#if 42 != 1 && 42 != 42 -#include "Bletch: How does this C preprocessor concatenate tokens?" -#endif - -/* CPPSTDIN: - * This symbol contains the first part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. Typical value of "cc -E" or "/lib/cpp", but it can also - * call a wrapper. See CPPRUN. - */ -/* CPPMINUS: - * This symbol contains the second part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. This symbol will have the value "-" if CPPSTDIN needs a minus - * to specify standard input, otherwise the value is "". - */ -/* CPPRUN: - * This symbol contains the string which will invoke a C preprocessor on - * the standard input and produce to standard output. It needs to end - * with CPPLAST, after all other preprocessor flags have been specified. - * The main difference with CPPSTDIN is that this program will never be a - * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is - * available directly to the user. Note that it may well be different from - * the preprocessor used to compile the C program. - */ -/* CPPLAST: - * This symbol is intended to be used along with CPPRUN in the same manner - * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". - */ -#define CPPSTDIN "cppstdin" -#define CPPMINUS "" -#define CPPRUN "cpp32 -oCON" -#define CPPLAST "" - -/* HAS_ACCESS: - * This manifest constant lets the C program know that the access() - * system call is available to check for accessibility using real UID/GID. - * (always present on UNIX.) - */ -#define HAS_ACCESS /**/ - -/* HASATTRIBUTE_FORMAT: - * Can we handle GCC attribute for checking printf-style formats - */ -/* PRINTF_FORMAT_NULL_OK: - * Allows __printf__ format to be null when checking printf-style - */ -/* HASATTRIBUTE_MALLOC: - * Can we handle GCC attribute for malloc-style functions. - */ -/* HASATTRIBUTE_NONNULL: - * Can we handle GCC attribute for nonnull function parms. - */ -/* HASATTRIBUTE_NORETURN: - * Can we handle GCC attribute for functions that do not return - */ -/* HASATTRIBUTE_PURE: - * Can we handle GCC attribute for pure functions - */ -/* HASATTRIBUTE_UNUSED: - * Can we handle GCC attribute for unused variables and arguments - */ -/* HASATTRIBUTE_DEPRECATED: - * Can we handle GCC attribute for marking deprecated APIs - */ -/* HASATTRIBUTE_WARN_UNUSED_RESULT: - * Can we handle GCC attribute for warning on unused results - */ -/*#define HASATTRIBUTE_DEPRECATED / **/ -/*#define HASATTRIBUTE_FORMAT / **/ -/*#define PRINTF_FORMAT_NULL_OK / **/ -/*#define HASATTRIBUTE_NORETURN / **/ -/*#define HASATTRIBUTE_MALLOC / **/ -/*#define HASATTRIBUTE_NONNULL / **/ -/*#define HASATTRIBUTE_PURE / **/ -/*#define HASATTRIBUTE_UNUSED / **/ -/*#define HASATTRIBUTE_WARN_UNUSED_RESULT / **/ - -/* HASCONST: - * This symbol, if defined, indicates that this C compiler knows about - * the const type. There is no need to actually test for that symbol - * within your programs. The mere use of the "const" keyword will - * trigger the necessary tests. - */ -#define HASCONST /**/ -#ifndef HASCONST -#define const -#endif - -/* HAS_CSH: - * This symbol, if defined, indicates that the C-shell exists. - */ -/* CSH: - * This symbol, if defined, contains the full pathname of csh. - */ -/*#define HAS_CSH / **/ -#ifdef HAS_CSH -#define CSH "" /**/ -#endif - -/* SETUID_SCRIPTS_ARE_SECURE_NOW: - * This symbol, if defined, indicates that the bug that prevents - * setuid scripts from being secure is not present in this kernel. - */ -/* DOSUID: - * This symbol, if defined, indicates that the C program should - * check the script that it is executing for setuid/setgid bits, and - * attempt to emulate setuid/setgid on systems that have disabled - * setuid #! scripts because the kernel can't do it securely. - * It is up to the package designer to make sure that this emulation - * is done securely. Among other things, it should do an fstat on - * the script it just opened to make sure it really is a setuid/setgid - * script, it should make sure the arguments passed correspond exactly - * to the argument on the #! line, and it should not trust any - * subprocesses to which it must pass the filename rather than the - * file descriptor of the script to be executed. - */ -/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/ -/*#define DOSUID / **/ - -/* HAS_ENDGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the group database. - */ -/*#define HAS_ENDGRENT / **/ - -/* HAS_ENDHOSTENT: - * This symbol, if defined, indicates that the endhostent() routine is - * available to close whatever was being used for host queries. - */ -/*#define HAS_ENDHOSTENT / **/ - -/* HAS_ENDNETENT: - * This symbol, if defined, indicates that the endnetent() routine is - * available to close whatever was being used for network queries. - */ -/*#define HAS_ENDNETENT / **/ - -/* HAS_ENDPROTOENT: - * This symbol, if defined, indicates that the endprotoent() routine is - * available to close whatever was being used for protocol queries. - */ -/*#define HAS_ENDPROTOENT / **/ - -/* HAS_ENDPWENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the passwd database. - */ -/*#define HAS_ENDPWENT / **/ - -/* HAS_ENDSERVENT: - * This symbol, if defined, indicates that the endservent() routine is - * available to close whatever was being used for service queries. - */ -/*#define HAS_ENDSERVENT / **/ - -/* FLEXFILENAMES: - * This symbol, if defined, indicates that the system supports filenames - * longer than 14 characters. - */ -#define FLEXFILENAMES /**/ - -/* HAS_GETGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for sequential access of the group database. - */ -/*#define HAS_GETGRENT / **/ - -/* HAS_GETHOSTBYADDR: - * This symbol, if defined, indicates that the gethostbyaddr() routine is - * available to look up hosts by their IP addresses. - */ -#define HAS_GETHOSTBYADDR /**/ - -/* HAS_GETHOSTBYNAME: - * This symbol, if defined, indicates that the gethostbyname() routine is - * available to look up host names in some data base or other. - */ -#define HAS_GETHOSTBYNAME /**/ - -/* HAS_GETHOSTENT: - * This symbol, if defined, indicates that the gethostent() routine is - * available to look up host names in some data base or another. - */ -/*#define HAS_GETHOSTENT / **/ - -/* HAS_GETHOSTNAME: - * This symbol, if defined, indicates that the C program may use the - * gethostname() routine to derive the host name. See also HAS_UNAME - * and PHOSTNAME. - */ -/* HAS_UNAME: - * This symbol, if defined, indicates that the C program may use the - * uname() routine to derive the host name. See also HAS_GETHOSTNAME - * and PHOSTNAME. - */ -/* PHOSTNAME: - * This symbol, if defined, indicates the command to feed to the - * popen() routine to derive the host name. See also HAS_GETHOSTNAME - * and HAS_UNAME. Note that the command uses a fully qualified path, - * so that it is safe even if used by a process with super-user - * privileges. - */ -/* HAS_PHOSTNAME: - * This symbol, if defined, indicates that the C program may use the - * contents of PHOSTNAME as a command to feed to the popen() routine - * to derive the host name. - */ -#define HAS_GETHOSTNAME /**/ -#define HAS_UNAME /**/ -/*#define HAS_PHOSTNAME / **/ -#ifdef HAS_PHOSTNAME -#define PHOSTNAME "" /* How to get the host name */ -#endif - -/* HAS_GETNETBYADDR: - * This symbol, if defined, indicates that the getnetbyaddr() routine is - * available to look up networks by their IP addresses. - */ -/*#define HAS_GETNETBYADDR / **/ - -/* HAS_GETNETBYNAME: - * This symbol, if defined, indicates that the getnetbyname() routine is - * available to look up networks by their names. - */ -/*#define HAS_GETNETBYNAME / **/ - -/* HAS_GETNETENT: - * This symbol, if defined, indicates that the getnetent() routine is - * available to look up network names in some data base or another. - */ -/*#define HAS_GETNETENT / **/ - -/* HAS_GETPROTOENT: - * This symbol, if defined, indicates that the getprotoent() routine is - * available to look up protocols in some data base or another. - */ -/*#define HAS_GETPROTOENT / **/ - -/* HAS_GETPGRP: - * This symbol, if defined, indicates that the getpgrp routine is - * available to get the current process group. - */ -/* USE_BSD_GETPGRP: - * This symbol, if defined, indicates that getpgrp needs one - * arguments whereas USG one needs none. - */ -/*#define HAS_GETPGRP / **/ -/*#define USE_BSD_GETPGRP / **/ - -/* HAS_GETPROTOBYNAME: - * This symbol, if defined, indicates that the getprotobyname() - * routine is available to look up protocols by their name. - */ -/* HAS_GETPROTOBYNUMBER: - * This symbol, if defined, indicates that the getprotobynumber() - * routine is available to look up protocols by their number. - */ -#define HAS_GETPROTOBYNAME /**/ -#define HAS_GETPROTOBYNUMBER /**/ - -/* HAS_GETPWENT: - * This symbol, if defined, indicates that the getpwent routine is - * available for sequential access of the passwd database. - * If this is not available, the older getpw() function may be available. - */ -/*#define HAS_GETPWENT / **/ - -/* HAS_GETSERVENT: - * This symbol, if defined, indicates that the getservent() routine is - * available to look up network services in some data base or another. - */ -/*#define HAS_GETSERVENT / **/ - -/* HAS_GETSERVBYNAME: - * This symbol, if defined, indicates that the getservbyname() - * routine is available to look up services by their name. - */ -/* HAS_GETSERVBYPORT: - * This symbol, if defined, indicates that the getservbyport() - * routine is available to look up services by their port. - */ -#define HAS_GETSERVBYNAME /**/ -#define HAS_GETSERVBYPORT /**/ - -/* HAS_HTONL: - * This symbol, if defined, indicates that the htonl() routine (and - * friends htons() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_HTONS: - * This symbol, if defined, indicates that the htons() routine (and - * friends htonl() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHL: - * This symbol, if defined, indicates that the ntohl() routine (and - * friends htonl() htons() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHS: - * This symbol, if defined, indicates that the ntohs() routine (and - * friends htonl() htons() ntohl()) are available to do network - * order byte swapping. - */ -#define HAS_HTONL /**/ -#define HAS_HTONS /**/ -#define HAS_NTOHL /**/ -#define HAS_NTOHS /**/ - -/* HAS_LONG_DOUBLE: - * This symbol will be defined if the C compiler supports long - * doubles. - */ -/* LONG_DOUBLESIZE: - * This symbol contains the size of a long double, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long doubles. - */ -#define HAS_LONG_DOUBLE /**/ -#ifdef HAS_LONG_DOUBLE -#define LONG_DOUBLESIZE 10 /**/ -#endif - -/* HAS_LONG_LONG: - * This symbol will be defined if the C compiler supports long long. - */ -/* LONGLONGSIZE: - * This symbol contains the size of a long long, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long long. - */ -/*#define HAS_LONG_LONG / **/ -#ifdef HAS_LONG_LONG -#define LONGLONGSIZE 8 /**/ -#endif - -/* HAS_MEMCHR: - * This symbol, if defined, indicates that the memchr routine is available - * to locate characters within a C string. - */ -#define HAS_MEMCHR /**/ - -/* HAS_MKSTEMP: - * This symbol, if defined, indicates that the mkstemp routine is - * available to exclusively create and open a uniquely named - * temporary file. - */ -/*#define HAS_MKSTEMP / **/ - -/* HAS_MMAP: - * This symbol, if defined, indicates that the mmap system call is - * available to map a file into memory. - */ -/* Mmap_t: - * This symbol holds the return type of the mmap() system call - * (and simultaneously the type of the first argument). - * Usually set to 'void *' or 'caddr_t'. - */ -/*#define HAS_MMAP / **/ -#define Mmap_t void * /**/ - -/* HAS_MSG: - * This symbol, if defined, indicates that the entire msg*(2) library is - * supported (IPC mechanism based on message queues). - */ -/*#define HAS_MSG / **/ - -/* HAS_SEM: - * This symbol, if defined, indicates that the entire sem*(2) library is - * supported. - */ -/*#define HAS_SEM / **/ - -/* HAS_SETGRENT: - * This symbol, if defined, indicates that the setgrent routine is - * available for initializing sequential access of the group database. - */ -/*#define HAS_SETGRENT / **/ - -/* HAS_SETHOSTENT: - * This symbol, if defined, indicates that the sethostent() routine is - * available. - */ -/*#define HAS_SETHOSTENT / **/ - -/* HAS_SETNETENT: - * This symbol, if defined, indicates that the setnetent() routine is - * available. - */ -/*#define HAS_SETNETENT / **/ - -/* HAS_SETPROTOENT: - * This symbol, if defined, indicates that the setprotoent() routine is - * available. - */ -/*#define HAS_SETPROTOENT / **/ - -/* HAS_SETPGRP: - * This symbol, if defined, indicates that the setpgrp routine is - * available to set the current process group. - */ -/* USE_BSD_SETPGRP: - * This symbol, if defined, indicates that setpgrp needs two - * arguments whereas USG one needs none. See also HAS_SETPGID - * for a POSIX interface. - */ -/*#define HAS_SETPGRP / **/ -/*#define USE_BSD_SETPGRP / **/ - -/* HAS_SETPWENT: - * This symbol, if defined, indicates that the setpwent routine is - * available for initializing sequential access of the passwd database. - */ -/*#define HAS_SETPWENT / **/ - -/* HAS_SETSERVENT: - * This symbol, if defined, indicates that the setservent() routine is - * available. - */ -/*#define HAS_SETSERVENT / **/ - -/* HAS_SETVBUF: - * This symbol, if defined, indicates that the setvbuf routine is - * available to change buffering on an open stdio stream. - * to a line-buffered mode. - */ -#define HAS_SETVBUF /**/ - -/* HAS_SHM: - * This symbol, if defined, indicates that the entire shm*(2) library is - * supported. - */ -/*#define HAS_SHM / **/ - -/* Shmat_t: - * This symbol holds the return type of the shmat() system call. - * Usually set to 'void *' or 'char *'. - */ -/* HAS_SHMAT_PROTOTYPE: - * This symbol, if defined, indicates that the sys/shm.h includes - * a prototype for shmat(). Otherwise, it is up to the program to - * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess, - * but not always right so it should be emitted by the program only - * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. - */ -#define Shmat_t void * /**/ -/*#define HAS_SHMAT_PROTOTYPE / **/ - -/* HAS_SOCKET: - * This symbol, if defined, indicates that the BSD socket interface is - * supported. - */ -/* HAS_SOCKETPAIR: - * This symbol, if defined, indicates that the BSD socketpair() call is - * supported. - */ -/* HAS_MSG_CTRUNC: - * This symbol, if defined, indicates that the MSG_CTRUNC is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_DONTROUTE: - * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_OOB: - * This symbol, if defined, indicates that the MSG_OOB is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_PEEK: - * This symbol, if defined, indicates that the MSG_PEEK is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_PROXY: - * This symbol, if defined, indicates that the MSG_PROXY is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_SCM_RIGHTS: - * This symbol, if defined, indicates that the SCM_RIGHTS is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_SOCKADDR_SA_LEN: - * This symbol, if defined, indicates that the struct sockaddr - * structure has a member called sa_len, indicating the length of - * the structure. - */ -/* HAS_SIN6_SCOPE_ID: - * This symbol, if defined, indicates that the struct sockaddr_in6 - * structure has a member called sin6_scope_id. - */ -#define HAS_SOCKET /**/ -/*#define HAS_SOCKETPAIR / **/ -/*#define HAS_SOCKADDR_SA_LEN / **/ -/*#define HAS_MSG_CTRUNC / **/ -/*#define HAS_MSG_DONTROUTE / **/ -/*#define HAS_MSG_OOB / **/ -/*#define HAS_MSG_PEEK / **/ -/*#define HAS_MSG_PROXY / **/ -/*#define HAS_SCM_RIGHTS / **/ -#define HAS_SIN6_SCOPE_ID /**/ - -/* USE_STAT_BLOCKS: - * This symbol is defined if this system has a stat structure declaring - * st_blksize and st_blocks. - */ -#ifndef USE_STAT_BLOCKS -/*#define USE_STAT_BLOCKS / **/ -#endif - -/* USE_STRUCT_COPY: - * This symbol, if defined, indicates that this C compiler knows how - * to copy structures. If undefined, you'll need to use a block copy - * routine of some sort instead. - */ -#define USE_STRUCT_COPY /**/ - -/* HAS_STRERROR: - * This symbol, if defined, indicates that the strerror routine is - * available to translate error numbers to strings. See the writeup - * of Strerror() in this file before you try to define your own. - */ -/* HAS_SYS_ERRLIST: - * This symbol, if defined, indicates that the sys_errlist array is - * available to translate error numbers to strings. The extern int - * sys_nerr gives the size of that table. - */ -/* Strerror: - * This preprocessor symbol is defined as a macro if strerror() is - * not available to translate error numbers to strings but sys_errlist[] - * array is there. - */ -#define HAS_STRERROR /**/ -#define HAS_SYS_ERRLIST /**/ -#define Strerror(e) strerror(e) - -/* HAS_STRTOUL: - * This symbol, if defined, indicates that the strtoul routine is - * available to provide conversion of strings to unsigned long. - */ -#define HAS_STRTOUL /**/ - -/* HAS_UNION_SEMUN: - * This symbol, if defined, indicates that the union semun is - * defined by including . If not, the user code - * probably needs to define it as: - * union semun { - * int val; - * struct semid_ds *buf; - * unsigned short *array; - * } - */ -/* USE_SEMCTL_SEMUN: - * This symbol, if defined, indicates that union semun is - * used for semctl IPC_STAT. - */ -/* USE_SEMCTL_SEMID_DS: - * This symbol, if defined, indicates that struct semid_ds * is - * used for semctl IPC_STAT. - */ -#define HAS_UNION_SEMUN /**/ -/*#define USE_SEMCTL_SEMUN / **/ -/*#define USE_SEMCTL_SEMID_DS / **/ - -/* HAS_VFORK: - * This symbol, if defined, indicates that vfork() exists. - */ -/*#define HAS_VFORK / **/ - -/* HAS_PSEUDOFORK: - * This symbol, if defined, indicates that an emulation of the - * fork routine is available. - */ -/*#define HAS_PSEUDOFORK / **/ - -/* Signal_t: - * This symbol's value is either "void" or "int", corresponding to the - * appropriate return type of a signal handler. Thus, you can declare - * a signal handler using "Signal_t (*handler)()", and define the - * handler using "Signal_t handler(sig)". - */ -#define Signal_t void /* Signal handler's return type */ - -/* HASVOLATILE: - * This symbol, if defined, indicates that this C compiler knows about - * the volatile declaration. - */ -#define HASVOLATILE /**/ -#ifndef HASVOLATILE -#define volatile -#endif - -/* I_DIRENT: - * This symbol, if defined, indicates to the C program that it should - * include . Using this symbol also triggers the definition - * of the Direntry_t define which ends up being 'struct dirent' or - * 'struct direct' depending on the availability of . - */ -/* DIRNAMLEN: - * This symbol, if defined, indicates to the C program that the length - * of directory entry names is provided by a d_namlen field. Otherwise - * you need to do strlen() on the d_name field. - */ -/* Direntry_t: - * This symbol is set to 'struct direct' or 'struct dirent' depending on - * whether dirent is available or not. You should use this pseudo type to - * portably declare your directory entries. - */ -#define I_DIRENT /**/ -#define DIRNAMLEN /**/ -#define Direntry_t struct direct - -/* I_GRP: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* GRPASSWD: - * This symbol, if defined, indicates to the C program that struct group - * in contains gr_passwd. - */ -/*#define I_GRP / **/ -/*#define GRPASSWD / **/ - -/* I_NDBM: - * This symbol, if defined, indicates that exists and should - * be included. - */ -/* I_GDBMNDBM: - * This symbol, if defined, indicates that exists and should - * be included. This was the location of the ndbm.h compatibility file - * in RedHat 7.1. - */ -/* I_GDBM_NDBM: - * This symbol, if defined, indicates that exists and should - * be included. This is the location of the ndbm.h compatibility file - * in Debian 4.0. - */ -/* NDBM_H_USES_PROTOTYPES: - * This symbol, if defined, indicates that uses real ANSI C - * prototypes instead of K&R style function declarations without any - * parameter information. While ANSI C prototypes are supported in C++, - * K&R style function declarations will yield errors. - */ -/* GDBMNDBM_H_USES_PROTOTYPES: - * This symbol, if defined, indicates that uses real ANSI C - * prototypes instead of K&R style function declarations without any - * parameter information. While ANSI C prototypes are supported in C++, - * K&R style function declarations will yield errors. - */ -/* GDBM_NDBM_H_USES_PROTOTYPES: - * This symbol, if defined, indicates that uses real ANSI C - * prototypes instead of K&R style function declarations without any - * parameter information. While ANSI C prototypes are supported in C++, - * K&R style function declarations will yield errors. - */ -/*#define I_NDBM / **/ -/*#define I_GDBMNDBM / **/ -/*#define I_GDBM_NDBM / **/ -/*#define NDBM_H_USES_PROTOTYPES / **/ -/*#define GDBMNDBM_H_USES_PROTOTYPES / **/ -/*#define GDBM_NDBM_H_USES_PROTOTYPES / **/ - -/* I_NETDB: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_NETDB / **/ - -/* I_NET_ERRNO: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_NET_ERRNO / **/ - -/* I_PWD: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* PWQUOTA: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_quota. - */ -/* PWAGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_age. - */ -/* PWCHANGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_change. - */ -/* PWCLASS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_class. - */ -/* PWEXPIRE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_expire. - */ -/* PWCOMMENT: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_comment. - */ -/* PWGECOS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_gecos. - */ -/* PWPASSWD: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_passwd. - */ -/*#define I_PWD / **/ -/*#define PWQUOTA / **/ -/*#define PWAGE / **/ -/*#define PWCHANGE / **/ -/*#define PWCLASS / **/ -/*#define PWEXPIRE / **/ -/*#define PWCOMMENT / **/ -/*#define PWGECOS / **/ -/*#define PWPASSWD / **/ - -/* I_SYSUIO: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SYSUIO / **/ - -/* I_STDARG: - * This symbol, if defined, indicates that exists and should - * be included. - */ -/* I_VARARGS: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#define I_STDARG /**/ -/*#define I_VARARGS / **/ - -/* Free_t: - * This variable contains the return type of free(). It is usually - * void, but occasionally int. - */ -/* Malloc_t: - * This symbol is the type of pointer returned by malloc and realloc. - */ -#define Malloc_t void * /**/ -#define Free_t void /**/ - -/* PERL_MALLOC_WRAP: - * This symbol, if defined, indicates that we'd like malloc wrap checks. - */ -#define PERL_MALLOC_WRAP /**/ - -/* MYMALLOC: - * This symbol, if defined, indicates that we're using our own malloc. - */ -/*#define MYMALLOC / **/ - -/* CAN_PROTOTYPE: - * If defined, this macro indicates that the C compiler can handle - * function prototypes. - */ -/* _: - * This macro is used to declare function parameters for folks who want - * to make declarations with prototypes using a different style than - * the above macros. Use double parentheses. For example: - * - * int main _((int argc, char *argv[])); - */ -#define CAN_PROTOTYPE /**/ -#ifdef CAN_PROTOTYPE -#define _(args) args -#else -#define _(args) () -#endif - -/* SH_PATH: - * This symbol contains the full pathname to the shell used on this - * on this system to execute Bourne shell scripts. Usually, this will be - * /bin/sh, though it's possible that some systems will have /bin/ksh, - * /bin/pdksh, /bin/ash, /bin/bash, or even something such as - * D:/bin/sh.exe. - */ -#define SH_PATH "cmd /x /c" /**/ - -/* SIG_NAME: - * This symbol contains a list of signal names in order of - * signal number. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". - * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, - * etc., where nn is the actual signal number (e.g. NUM37). - * The signal number for sig_name[i] is stored in sig_num[i]. - * The last element is 0 to terminate the list with a NULL. This - * corresponds to the 0 at the end of the sig_name_init list. - * Note that this variable is initialized from the sig_name_init, - * not from sig_name (which is unused). - */ -/* SIG_NUM: - * This symbol contains a list of signal numbers, in the same order as the - * SIG_NAME list. It is suitable for static array initialization, as in: - * int sig_num[] = { SIG_NUM }; - * The signals in the list are separated with commas, and the indices - * within that list and the SIG_NAME list match, so it's easy to compute - * the signal name from a number or vice versa at the price of a small - * dynamic linear lookup. - * Duplicates are allowed, but are moved to the end of the list. - * The signal number corresponding to sig_name[i] is sig_number[i]. - * if (i < NSIG) then sig_number[i] == i. - * The last element is 0, corresponding to the 0 at the end of - * the sig_name_init list. - * Note that this variable is initialized from the sig_num_init, - * not from sig_num (which is unused). - */ -/* SIG_SIZE: - * This variable contains the number of elements of the SIG_NAME - * and SIG_NUM arrays, excluding the final NULL entry. - */ -#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "USR1", "USR2", "CHLD", "NUM19", "USR3", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/ -#define SIG_NUM 0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 18, 0 /**/ -#define SIG_SIZE 27 /**/ - -/* STDCHAR: - * This symbol is defined to be the type of char used in stdio.h. - * It has the values "unsigned char" or "char". - */ -#define STDCHAR unsigned char /**/ - -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = supports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. - */ -#ifndef VOIDUSED -#define VOIDUSED 15 -#endif -#define VOIDFLAGS 15 -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif - -/* PERL_USE_DEVEL: - * This symbol, if defined, indicates that Perl was configured with - * -Dusedevel, to enable development features. This should not be - * done for production builds. - */ -/*#define PERL_USE_DEVEL / **/ - -/* HAS_ATOLF: - * This symbol, if defined, indicates that the atolf routine is - * available to convert strings into long doubles. - */ -/*#define HAS_ATOLF / **/ - -/* HAS_ATOLL: - * This symbol, if defined, indicates that the atoll routine is - * available to convert strings into long longs. - */ -/*#define HAS_ATOLL / **/ - -/* HAS__FWALK: - * This symbol, if defined, indicates that the _fwalk system call is - * available to apply a function to all the file handles. - */ -/*#define HAS__FWALK / **/ - -/* HAS_AINTL: - * This symbol, if defined, indicates that the aintl routine is - * available. If copysignl is also present we can emulate modfl. - */ -/*#define HAS_AINTL / **/ - -/* HAS_BUILTIN_CHOOSE_EXPR: - * Can we handle GCC builtin for compile-time ternary-like expressions - */ -/* HAS_BUILTIN_EXPECT: - * Can we handle GCC builtin for telling that certain values are more - * likely - */ -/*#define HAS_BUILTIN_EXPECT / **/ -/*#define HAS_BUILTIN_CHOOSE_EXPR / **/ - -/* HAS_C99_VARIADIC_MACROS: - * If defined, the compiler supports C99 variadic macros. - */ -/*#define HAS_C99_VARIADIC_MACROS / **/ - -/* HAS_CLASS: - * This symbol, if defined, indicates that the class routine is - * available to classify doubles. Available for example in AIX. - * The returned values are defined in and are: - * - * FP_PLUS_NORM Positive normalized, nonzero - * FP_MINUS_NORM Negative normalized, nonzero - * FP_PLUS_DENORM Positive denormalized, nonzero - * FP_MINUS_DENORM Negative denormalized, nonzero - * FP_PLUS_ZERO +0.0 - * FP_MINUS_ZERO -0.0 - * FP_PLUS_INF +INF - * FP_MINUS_INF -INF - * FP_NANS Signaling Not a Number (NaNS) - * FP_NANQ Quiet Not a Number (NaNQ) - */ -/*#define HAS_CLASS / **/ - -/* HAS_CLEARENV: - * This symbol, if defined, indicates that the clearenv () routine is - * available for use. - */ -/*#define HAS_CLEARENV / **/ - -/* HAS_STRUCT_CMSGHDR: - * This symbol, if defined, indicates that the struct cmsghdr - * is supported. - */ -/*#define HAS_STRUCT_CMSGHDR / **/ - -/* HAS_COPYSIGNL: - * This symbol, if defined, indicates that the copysignl routine is - * available. If aintl is also present we can emulate modfl. - */ -/*#define HAS_COPYSIGNL / **/ - -/* USE_CPLUSPLUS: - * This symbol, if defined, indicates that a C++ compiler was - * used to compiled Perl and will be used to compile extensions. - */ -/*#define USE_CPLUSPLUS / **/ - -/* HAS_DBMINIT_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the dbminit() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern int dbminit(char *); - */ -/*#define HAS_DBMINIT_PROTO / **/ - -/* HAS_DIR_DD_FD: - * This symbol, if defined, indicates that the the DIR* dirstream - * structure contains a member variable named dd_fd. - */ -/*#define HAS_DIR_DD_FD / **/ - -/* HAS_DIRFD: - * This manifest constant lets the C program know that dirfd - * is available. - */ -/*#define HAS_DIRFD / **/ - -/* DLSYM_NEEDS_UNDERSCORE: - * This symbol, if defined, indicates that we need to prepend an - * underscore to the symbol name before calling dlsym(). This only - * makes sense if you *have* dlsym, which we will presume is the - * case if you're using dl_dlopen.xs. - */ -/*#define DLSYM_NEEDS_UNDERSCORE / **/ - -/* HAS_FAST_STDIO: - * This symbol, if defined, indicates that the "fast stdio" - * is available to manipulate the stdio buffers directly. - */ -#define HAS_FAST_STDIO /**/ - -/* HAS_FCHDIR: - * This symbol, if defined, indicates that the fchdir routine is - * available to change directory using a file descriptor. - */ -/*#define HAS_FCHDIR / **/ - -/* FCNTL_CAN_LOCK: - * This symbol, if defined, indicates that fcntl() can be used - * for file locking. Normally on Unix systems this is defined. - * It may be undefined on VMS. - */ -/*#define FCNTL_CAN_LOCK / **/ - -/* HAS_FINITE: - * This symbol, if defined, indicates that the finite routine is - * available to check whether a double is finite (non-infinity non-NaN). - */ -/*#define HAS_FINITE / **/ - -/* HAS_FINITEL: - * This symbol, if defined, indicates that the finitel routine is - * available to check whether a long double is finite - * (non-infinity non-NaN). - */ -/*#define HAS_FINITEL / **/ - -/* HAS_FLOCK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the flock() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern int flock(int, int); - */ -#define HAS_FLOCK_PROTO /**/ - -/* HAS_FP_CLASS: - * This symbol, if defined, indicates that the fp_class routine is - * available to classify doubles. Available for example in Digital UNIX. - * The returned values are defined in and are: - * - * FP_SNAN Signaling NaN (Not-a-Number) - * FP_QNAN Quiet NaN (Not-a-Number) - * FP_POS_INF +infinity - * FP_NEG_INF -infinity - * FP_POS_NORM Positive normalized - * FP_NEG_NORM Negative normalized - * FP_POS_DENORM Positive denormalized - * FP_NEG_DENORM Negative denormalized - * FP_POS_ZERO +0.0 (positive zero) - * FP_NEG_ZERO -0.0 (negative zero) - */ -/*#define HAS_FP_CLASS / **/ - -/* HAS_FPCLASS: - * This symbol, if defined, indicates that the fpclass routine is - * available to classify doubles. Available for example in Solaris/SVR4. - * The returned values are defined in and are: - * - * FP_SNAN signaling NaN - * FP_QNAN quiet NaN - * FP_NINF negative infinity - * FP_PINF positive infinity - * FP_NDENORM negative denormalized non-zero - * FP_PDENORM positive denormalized non-zero - * FP_NZERO negative zero - * FP_PZERO positive zero - * FP_NNORM negative normalized non-zero - * FP_PNORM positive normalized non-zero - */ -/*#define HAS_FPCLASS / **/ - -/* HAS_FPCLASSIFY: - * This symbol, if defined, indicates that the fpclassify routine is - * available to classify doubles. Available for example in HP-UX. - * The returned values are defined in and are - * - * FP_NORMAL Normalized - * FP_ZERO Zero - * FP_INFINITE Infinity - * FP_SUBNORMAL Denormalized - * FP_NAN NaN - * - */ -/*#define HAS_FPCLASSIFY / **/ - -/* HAS_FPCLASSL: - * This symbol, if defined, indicates that the fpclassl routine is - * available to classify long doubles. Available for example in IRIX. - * The returned values are defined in and are: - * - * FP_SNAN signaling NaN - * FP_QNAN quiet NaN - * FP_NINF negative infinity - * FP_PINF positive infinity - * FP_NDENORM negative denormalized non-zero - * FP_PDENORM positive denormalized non-zero - * FP_NZERO negative zero - * FP_PZERO positive zero - * FP_NNORM negative normalized non-zero - * FP_PNORM positive normalized non-zero - */ -/*#define HAS_FPCLASSL / **/ - -/* HAS_FPOS64_T: - * This symbol will be defined if the C compiler supports fpos64_t. - */ -/*#define HAS_FPOS64_T / **/ - -/* HAS_FREXPL: - * This symbol, if defined, indicates that the frexpl routine is - * available to break a long double floating-point number into - * a normalized fraction and an integral power of 2. - */ -/*#define HAS_FREXPL / **/ - -/* HAS_STRUCT_FS_DATA: - * This symbol, if defined, indicates that the struct fs_data - * to do statfs() is supported. - */ -/*#define HAS_STRUCT_FS_DATA / **/ - -/* HAS_FSEEKO: - * This symbol, if defined, indicates that the fseeko routine is - * available to fseek beyond 32 bits (useful for ILP32 hosts). - */ -/*#define HAS_FSEEKO / **/ - -/* HAS_FSTATFS: - * This symbol, if defined, indicates that the fstatfs routine is - * available to stat filesystems by file descriptors. - */ -/*#define HAS_FSTATFS / **/ - -/* HAS_FSYNC: - * This symbol, if defined, indicates that the fsync routine is - * available to write a file's modified data and attributes to - * permanent storage. - */ -/*#define HAS_FSYNC / **/ - -/* HAS_FTELLO: - * This symbol, if defined, indicates that the ftello routine is - * available to ftell beyond 32 bits (useful for ILP32 hosts). - */ -/*#define HAS_FTELLO / **/ - -/* HAS_FUTIMES: - * This symbol, if defined, indicates that the futimes routine is - * available to change file descriptor time stamps with struct timevals. - */ -/*#define HAS_FUTIMES / **/ - -/* HAS_GETADDRINFO: - * This symbol, if defined, indicates that the getaddrinfo() function - * is available for use. - */ -/*#define HAS_GETADDRINFO / **/ - -/* HAS_GETCWD: - * This symbol, if defined, indicates that the getcwd routine is - * available to get the current working directory. - */ -#define HAS_GETCWD /**/ - -/* HAS_GETESPWNAM: - * This symbol, if defined, indicates that the getespwnam system call is - * available to retrieve enhanced (shadow) password entries by name. - */ -/*#define HAS_GETESPWNAM / **/ - -/* HAS_GETFSSTAT: - * This symbol, if defined, indicates that the getfsstat routine is - * available to stat filesystems in bulk. - */ -/*#define HAS_GETFSSTAT / **/ - -/* HAS_GETITIMER: - * This symbol, if defined, indicates that the getitimer routine is - * available to return interval timers. - */ -/*#define HAS_GETITIMER / **/ - -/* HAS_GETMNT: - * This symbol, if defined, indicates that the getmnt routine is - * available to get filesystem mount info by filename. - */ -/*#define HAS_GETMNT / **/ - -/* HAS_GETMNTENT: - * This symbol, if defined, indicates that the getmntent routine is - * available to iterate through mounted file systems to get their info. - */ -/*#define HAS_GETMNTENT / **/ - -/* HAS_GETNAMEINFO: - * This symbol, if defined, indicates that the getnameinfo() function - * is available for use. - */ -/*#define HAS_GETNAMEINFO / **/ - -/* HAS_GETPRPWNAM: - * This symbol, if defined, indicates that the getprpwnam system call is - * available to retrieve protected (shadow) password entries by name. - */ -/*#define HAS_GETPRPWNAM / **/ - -/* HAS_GETSPNAM: - * This symbol, if defined, indicates that the getspnam system call is - * available to retrieve SysV shadow password entries by name. - */ -/*#define HAS_GETSPNAM / **/ - -/* HAS_HASMNTOPT: - * This symbol, if defined, indicates that the hasmntopt routine is - * available to query the mount options of file systems. - */ -/*#define HAS_HASMNTOPT / **/ - -/* HAS_ILOGBL: - * This symbol, if defined, indicates that the ilogbl routine is - * available. If scalbnl is also present we can emulate frexpl. - */ -/*#define HAS_ILOGBL / **/ - -/* HAS_INETNTOP: - * This symbol, if defined, indicates that the inet_ntop() function - * is available to parse IPv4 and IPv6 strings. - */ -/*#define HAS_INETNTOP / **/ - -/* HAS_INETPTON: - * This symbol, if defined, indicates that the inet_pton() function - * is available to parse IPv4 and IPv6 strings. - */ -/*#define HAS_INETPTON / **/ - -/* HAS_INT64_T: - * This symbol will defined if the C compiler supports int64_t. - * Usually the needs to be included, but sometimes - * is enough. - */ -/*#define HAS_INT64_T / **/ - -/* HAS_ISFINITE: - * This symbol, if defined, indicates that the isfinite routine is - * available to check whether a double is finite (non-infinity non-NaN). - */ -/*#define HAS_ISFINITE / **/ - -/* HAS_ISINF: - * This symbol, if defined, indicates that the isinf routine is - * available to check whether a double is an infinity. - */ -/*#define HAS_ISINF / **/ - -/* HAS_ISNAN: - * This symbol, if defined, indicates that the isnan routine is - * available to check whether a double is a NaN. - */ -#define HAS_ISNAN /**/ - -/* HAS_ISNANL: - * This symbol, if defined, indicates that the isnanl routine is - * available to check whether a long double is a NaN. - */ -/*#define HAS_ISNANL / **/ - -/* HAS_LDBL_DIG: - * This symbol, if defined, indicates that this system's - * or defines the symbol LDBL_DIG, which is the number - * of significant digits in a long double precision number. Unlike - * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. - */ -#define HAS_LDBL_DIG /**/ - -/* LIBM_LIB_VERSION: - * This symbol, if defined, indicates that libm exports _LIB_VERSION - * and that math.h defines the enum to manipulate it. - */ -/*#define LIBM_LIB_VERSION / **/ - -/* HAS_MADVISE: - * This symbol, if defined, indicates that the madvise system call is - * available to map a file into memory. - */ -/*#define HAS_MADVISE / **/ - -/* HAS_MALLOC_SIZE: - * This symbol, if defined, indicates that the malloc_size - * routine is available for use. - */ -/*#define HAS_MALLOC_SIZE / **/ - -/* HAS_MALLOC_GOOD_SIZE: - * This symbol, if defined, indicates that the malloc_good_size - * routine is available for use. - */ -/*#define HAS_MALLOC_GOOD_SIZE / **/ - -/* HAS_MKDTEMP: - * This symbol, if defined, indicates that the mkdtemp routine is - * available to exclusively create a uniquely named temporary directory. - */ -/*#define HAS_MKDTEMP / **/ - -/* HAS_MKSTEMPS: - * This symbol, if defined, indicates that the mkstemps routine is - * available to exclusively create and open a uniquely named - * (with a suffix) temporary file. - */ -/*#define HAS_MKSTEMPS / **/ - -/* HAS_MODFL: - * This symbol, if defined, indicates that the modfl routine is - * available to split a long double x into a fractional part f and - * an integer part i such that |f| < 1.0 and (f + i) = x. - */ -/* HAS_MODFL_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the modfl() function. Otherwise, it is up - * to the program to supply one. - */ -/* HAS_MODFL_POW32_BUG: - * This symbol, if defined, indicates that the modfl routine is - * broken for long doubles >= pow(2, 32). - * For example from 4294967303.150000 one would get 4294967302.000000 - * and 1.150000. The bug has been seen in certain versions of glibc, - * release 2.2.2 is known to be okay. - */ -/*#define HAS_MODFL / **/ -/*#define HAS_MODFL_PROTO / **/ -/*#define HAS_MODFL_POW32_BUG / **/ - -/* HAS_MPROTECT: - * This symbol, if defined, indicates that the mprotect system call is - * available to modify the access protection of a memory mapped file. - */ -/*#define HAS_MPROTECT / **/ - -/* HAS_STRUCT_MSGHDR: - * This symbol, if defined, indicates that the struct msghdr - * is supported. - */ -/*#define HAS_STRUCT_MSGHDR / **/ - -/* HAS_NL_LANGINFO: - * This symbol, if defined, indicates that the nl_langinfo routine is - * available to return local data. You will also need - * and therefore I_LANGINFO. - */ -/*#define HAS_NL_LANGINFO / **/ - -/* HAS_OFF64_T: - * This symbol will be defined if the C compiler supports off64_t. - */ -/*#define HAS_OFF64_T / **/ - -/* HAS_PRCTL: - * This symbol, if defined, indicates that the prctl routine is - * available to set process title. - */ -/* HAS_PRCTL_SET_NAME: - * This symbol, if defined, indicates that the prctl routine is - * available to set process title and supports PR_SET_NAME. - */ -/*#define HAS_PRCTL / **/ -/*#define HAS_PRCTL_SET_NAME / **/ - -/* HAS_PROCSELFEXE: - * This symbol is defined if PROCSELFEXE_PATH is a symlink - * to the absolute pathname of the executing program. - */ -/* PROCSELFEXE_PATH: - * If HAS_PROCSELFEXE is defined this symbol is the filename - * of the symbolic link pointing to the absolute pathname of - * the executing program. - */ -/*#define HAS_PROCSELFEXE / **/ -#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH) -#define PROCSELFEXE_PATH /**/ -#endif - -/* HAS_PTHREAD_ATTR_SETSCOPE: - * This symbol, if defined, indicates that the pthread_attr_setscope - * system call is available to set the contention scope attribute of - * a thread attribute object. - */ -/*#define HAS_PTHREAD_ATTR_SETSCOPE / **/ - -/* HAS_READV: - * This symbol, if defined, indicates that the readv routine is - * available to do gather reads. You will also need - * and there I_SYSUIO. - */ -/*#define HAS_READV / **/ - -/* HAS_RECVMSG: - * This symbol, if defined, indicates that the recvmsg routine is - * available to send structured socket messages. - */ -/*#define HAS_RECVMSG / **/ - -/* HAS_SBRK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the sbrk() function. Otherwise, it is up - * to the program to supply one. Good guesses are - * extern void* sbrk(int); - * extern void* sbrk(size_t); - */ -/*#define HAS_SBRK_PROTO / **/ - -/* HAS_SCALBNL: - * This symbol, if defined, indicates that the scalbnl routine is - * available. If ilogbl is also present we can emulate frexpl. - */ -/*#define HAS_SCALBNL / **/ - -/* HAS_SENDMSG: - * This symbol, if defined, indicates that the sendmsg routine is - * available to send structured socket messages. - */ -/*#define HAS_SENDMSG / **/ - -/* HAS_SETITIMER: - * This symbol, if defined, indicates that the setitimer routine is - * available to set interval timers. - */ -/*#define HAS_SETITIMER / **/ - -/* HAS_SETPROCTITLE: - * This symbol, if defined, indicates that the setproctitle routine is - * available to set process title. - */ -/*#define HAS_SETPROCTITLE / **/ - -/* USE_SFIO: - * This symbol, if defined, indicates that sfio should - * be used. - */ -/*#define USE_SFIO / **/ - -/* HAS_SIGNBIT: - * This symbol, if defined, indicates that the signbit routine is - * available to check if the given number has the sign bit set. - * This should include correct testing of -0.0. This will only be set - * if the signbit() routine is safe to use with the NV type used internally - * in perl. Users should call Perl_signbit(), which will be #defined to - * the system's signbit() function or macro if this symbol is defined. - */ -/*#define HAS_SIGNBIT / **/ - -/* HAS_SIGPROCMASK: - * This symbol, if defined, indicates that the sigprocmask - * system call is available to examine or change the signal mask - * of the calling process. - */ -/*#define HAS_SIGPROCMASK / **/ - -/* USE_SITECUSTOMIZE: - * This symbol, if defined, indicates that sitecustomize should - * be used. - */ -#ifndef USE_SITECUSTOMIZE -/*#define USE_SITECUSTOMIZE / **/ -#endif - -/* HAS_SNPRINTF: - * This symbol, if defined, indicates that the snprintf () library - * function is available for use. - */ -/* HAS_VSNPRINTF: - * This symbol, if defined, indicates that the vsnprintf () library - * function is available for use. - */ -#define HAS_SNPRINTF /**/ -#define HAS_VSNPRINTF /**/ - -/* HAS_SOCKATMARK: - * This symbol, if defined, indicates that the sockatmark routine is - * available to test whether a socket is at the out-of-band mark. - */ -/*#define HAS_SOCKATMARK / **/ - -/* HAS_SOCKATMARK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the sockatmark() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern int sockatmark(int); - */ -/*#define HAS_SOCKATMARK_PROTO / **/ - -/* HAS_SOCKS5_INIT: - * This symbol, if defined, indicates that the socks5_init routine is - * available to initialize SOCKS 5. - */ -/*#define HAS_SOCKS5_INIT / **/ - -/* SPRINTF_RETURNS_STRLEN: - * This variable defines whether sprintf returns the length of the string - * (as per the ANSI spec). Some C libraries retain compatibility with - * pre-ANSI C and return a pointer to the passed in buffer; for these - * this variable will be undef. - */ -#define SPRINTF_RETURNS_STRLEN /**/ - -/* HAS_SQRTL: - * This symbol, if defined, indicates that the sqrtl routine is - * available to do long double square roots. - */ -/*#define HAS_SQRTL / **/ - -/* HAS_SETRESGID_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the setresgid() function. Otherwise, it is up - * to the program to supply one. Good guesses are - * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid); - */ -/*#define HAS_SETRESGID_PROTO / **/ - -/* HAS_SETRESUID_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the setresuid() function. Otherwise, it is up - * to the program to supply one. Good guesses are - * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid); - */ -/*#define HAS_SETRESUID_PROTO / **/ - -/* HAS_STRUCT_STATFS_F_FLAGS: - * This symbol, if defined, indicates that the struct statfs - * does have the f_flags member containing the mount flags of - * the filesystem containing the file. - * This kind of struct statfs is coming from (BSD 4.3), - * not from (SYSV). Older BSDs (like Ultrix) do not - * have statfs() and struct statfs, they have ustat() and getmnt() - * with struct ustat and struct fs_data. - */ -/*#define HAS_STRUCT_STATFS_F_FLAGS / **/ - -/* HAS_STRUCT_STATFS: - * This symbol, if defined, indicates that the struct statfs - * to do statfs() is supported. - */ -/*#define HAS_STRUCT_STATFS / **/ - -/* HAS_FSTATVFS: - * This symbol, if defined, indicates that the fstatvfs routine is - * available to stat filesystems by file descriptors. - */ -/*#define HAS_FSTATVFS / **/ - -/* HAS_STRFTIME: - * This symbol, if defined, indicates that the strftime routine is - * available to do time formatting. - */ -#define HAS_STRFTIME /**/ - -/* HAS_STRLCAT: - * This symbol, if defined, indicates that the strlcat () routine is - * available to do string concatenation. - */ -/*#define HAS_STRLCAT / **/ - -/* HAS_STRLCPY: - * This symbol, if defined, indicates that the strlcpy () routine is - * available to do string copying. - */ -/*#define HAS_STRLCPY / **/ - -/* HAS_STRTOLD: - * This symbol, if defined, indicates that the strtold routine is - * available to convert strings to long doubles. - */ -/*#define HAS_STRTOLD / **/ - -/* HAS_STRTOLL: - * This symbol, if defined, indicates that the strtoll routine is - * available to convert strings to long longs. - */ -/*#define HAS_STRTOLL / **/ - -/* HAS_STRTOQ: - * This symbol, if defined, indicates that the strtoq routine is - * available to convert strings to long longs (quads). - */ -/*#define HAS_STRTOQ / **/ - -/* HAS_STRTOULL: - * This symbol, if defined, indicates that the strtoull routine is - * available to convert strings to unsigned long longs. - */ -/*#define HAS_STRTOULL / **/ - -/* HAS_STRTOUQ: - * This symbol, if defined, indicates that the strtouq routine is - * available to convert strings to unsigned long longs (quads). - */ -/*#define HAS_STRTOUQ / **/ - -/* HAS_SYSCALL_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the syscall() function. Otherwise, it is up - * to the program to supply one. Good guesses are - * extern int syscall(int, ...); - * extern int syscall(long, ...); - */ -/*#define HAS_SYSCALL_PROTO / **/ - -/* HAS_TELLDIR_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the telldir() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern long telldir(DIR*); - */ -#define HAS_TELLDIR_PROTO /**/ - -/* HAS_CTIME64: - * This symbol, if defined, indicates that the ctime64 () routine is - * available to do the 64bit variant of ctime () - */ -/* HAS_LOCALTIME64: - * This symbol, if defined, indicates that the localtime64 () routine is - * available to do the 64bit variant of localtime () - */ -/* HAS_GMTIME64: - * This symbol, if defined, indicates that the gmtime64 () routine is - * available to do the 64bit variant of gmtime () - */ -/* HAS_MKTIME64: - * This symbol, if defined, indicates that the mktime64 () routine is - * available to do the 64bit variant of mktime () - */ -/* HAS_DIFFTIME64: - * This symbol, if defined, indicates that the difftime64 () routine is - * available to do the 64bit variant of difftime () - */ -/* HAS_ASCTIME64: - * This symbol, if defined, indicates that the asctime64 () routine is - * available to do the 64bit variant of asctime () - */ -/*#define HAS_CTIME64 / **/ -/*#define HAS_LOCALTIME64 / **/ -/*#define HAS_GMTIME64 / **/ -/*#define HAS_MKTIME64 / **/ -/*#define HAS_DIFFTIME64 / **/ -/*#define HAS_ASCTIME64 / **/ - -/* HAS_TIMEGM: - * This symbol, if defined, indicates that the timegm routine is - * available to do the opposite of gmtime () - */ -/*#define HAS_TIMEGM / **/ - -/* U32_ALIGNMENT_REQUIRED: - * This symbol, if defined, indicates that you must access - * character data through U32-aligned pointers. - */ -#ifndef U32_ALIGNMENT_REQUIRED -#define U32_ALIGNMENT_REQUIRED /**/ -#endif - -/* HAS_UALARM: - * This symbol, if defined, indicates that the ualarm routine is - * available to do alarms with microsecond granularity. - */ -/*#define HAS_UALARM / **/ - -/* HAS_UNORDERED: - * This symbol, if defined, indicates that the unordered routine is - * available to check whether two doubles are unordered - * (effectively: whether either of them is NaN) - */ -/*#define HAS_UNORDERED / **/ - -/* HAS_UNSETENV: - * This symbol, if defined, indicates that the unsetenv () routine is - * available for use. - */ -/*#define HAS_UNSETENV / **/ - -/* HAS_USLEEP_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the usleep() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern int usleep(useconds_t); - */ -/*#define HAS_USLEEP_PROTO / **/ - -/* HAS_USTAT: - * This symbol, if defined, indicates that the ustat system call is - * available to query file system statistics by dev_t. - */ -/*#define HAS_USTAT / **/ - -/* HAS_WRITEV: - * This symbol, if defined, indicates that the writev routine is - * available to do scatter writes. - */ -/*#define HAS_WRITEV / **/ - -/* USE_DYNAMIC_LOADING: - * This symbol, if defined, indicates that dynamic loading of - * some sort is available. - */ -#define USE_DYNAMIC_LOADING /**/ - -/* FFLUSH_NULL: - * This symbol, if defined, tells that fflush(NULL) does flush - * all pending stdio output. - */ -/* FFLUSH_ALL: - * This symbol, if defined, tells that to flush - * all pending stdio output one must loop through all - * the stdio file handles stored in an array and fflush them. - * Note that if fflushNULL is defined, fflushall will not - * even be probed for and will be left undefined. - */ -#define FFLUSH_NULL /**/ -/*#define FFLUSH_ALL / **/ - -/* I_ASSERT: - * This symbol, if defined, indicates that exists and - * could be included by the C program to get the assert() macro. - */ -#define I_ASSERT /**/ - -/* I_CRYPT: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_CRYPT / **/ - -/* DB_Prefix_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is u_int32_t. - */ -/* DB_Hash_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is size_t. - */ -/* DB_VERSION_MAJOR_CFG: - * This symbol, if defined, defines the major version number of - * Berkeley DB found in the header when Perl was configured. - */ -/* DB_VERSION_MINOR_CFG: - * This symbol, if defined, defines the minor version number of - * Berkeley DB found in the header when Perl was configured. - * For DB version 1 this is always 0. - */ -/* DB_VERSION_PATCH_CFG: - * This symbol, if defined, defines the patch version number of - * Berkeley DB found in the header when Perl was configured. - * For DB version 1 this is always 0. - */ -#define DB_Hash_t int /**/ -#define DB_Prefix_t int /**/ -#define DB_VERSION_MAJOR_CFG 0 /**/ -#define DB_VERSION_MINOR_CFG 0 /**/ -#define DB_VERSION_PATCH_CFG 0 /**/ - -/* I_FP: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_FP / **/ - -/* I_FP_CLASS: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_FP_CLASS / **/ - -/* I_IEEEFP: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_IEEEFP / **/ - -/* I_INTTYPES: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_INTTYPES / **/ - -/* I_LANGINFO: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_LANGINFO / **/ - -/* I_LIBUTIL: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_LIBUTIL / **/ - -/* I_MALLOCMALLOC: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_MALLOCMALLOC / **/ - -/* I_MNTENT: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_MNTENT / **/ - -/* I_NETINET_TCP: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_NETINET_TCP / **/ - -/* I_POLL: - * This symbol, if defined, indicates that exists and - * should be included. (see also HAS_POLL) - */ -/*#define I_POLL / **/ - -/* I_PROT: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_PROT / **/ - -/* I_SHADOW: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SHADOW / **/ - -/* I_SOCKS: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SOCKS / **/ - -/* I_SUNMATH: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SUNMATH / **/ - -/* I_SYSLOG: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SYSLOG / **/ - -/* I_SYSMODE: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SYSMODE / **/ - -/* I_SYS_MOUNT: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SYS_MOUNT / **/ - -/* I_SYS_STATFS: - * This symbol, if defined, indicates that exists. - */ -/*#define I_SYS_STATFS / **/ - -/* I_SYS_STATVFS: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SYS_STATVFS / **/ - -/* I_SYSUTSNAME: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SYSUTSNAME / **/ - -/* I_SYS_VFS: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_SYS_VFS / **/ - -/* I_USTAT: - * This symbol, if defined, indicates that exists and - * should be included. - */ -/*#define I_USTAT / **/ - -/* PERL_PRIfldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'f') for output. - */ -/* PERL_PRIgldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'g') for output. - */ -/* PERL_PRIeldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'e') for output. - */ -/* PERL_SCNfldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'f') for input. - */ -/*#define PERL_PRIfldbl "Lf" / **/ -/*#define PERL_PRIgldbl "Lg" / **/ -/*#define PERL_PRIeldbl "Le" / **/ -/*#define PERL_SCNfldbl "Lf" / **/ - -/* PERL_MAD: - * This symbol, if defined, indicates that the Misc Attribution - * Declaration code should be conditionally compiled. - */ -/*#define PERL_MAD / **/ - -/* NEED_VA_COPY: - * This symbol, if defined, indicates that the system stores - * the variable argument list datatype, va_list, in a format - * that cannot be copied by simple assignment, so that some - * other means must be used when copying is required. - * As such systems vary in their provision (or non-provision) - * of copying mechanisms, handy.h defines a platform- - * independent macro, Perl_va_copy(src, dst), to do the job. - */ -/*#define NEED_VA_COPY / **/ - -/* IVTYPE: - * This symbol defines the C type used for Perl's IV. - */ -/* UVTYPE: - * This symbol defines the C type used for Perl's UV. - */ -/* I8TYPE: - * This symbol defines the C type used for Perl's I8. - */ -/* U8TYPE: - * This symbol defines the C type used for Perl's U8. - */ -/* I16TYPE: - * This symbol defines the C type used for Perl's I16. - */ -/* U16TYPE: - * This symbol defines the C type used for Perl's U16. - */ -/* I32TYPE: - * This symbol defines the C type used for Perl's I32. - */ -/* U32TYPE: - * This symbol defines the C type used for Perl's U32. - */ -/* I64TYPE: - * This symbol defines the C type used for Perl's I64. - */ -/* U64TYPE: - * This symbol defines the C type used for Perl's U64. - */ -/* NVTYPE: - * This symbol defines the C type used for Perl's NV. - */ -/* IVSIZE: - * This symbol contains the sizeof(IV). - */ -/* UVSIZE: - * This symbol contains the sizeof(UV). - */ -/* I8SIZE: - * This symbol contains the sizeof(I8). - */ -/* U8SIZE: - * This symbol contains the sizeof(U8). - */ -/* I16SIZE: - * This symbol contains the sizeof(I16). - */ -/* U16SIZE: - * This symbol contains the sizeof(U16). - */ -/* I32SIZE: - * This symbol contains the sizeof(I32). - */ -/* U32SIZE: - * This symbol contains the sizeof(U32). - */ -/* I64SIZE: - * This symbol contains the sizeof(I64). - */ -/* U64SIZE: - * This symbol contains the sizeof(U64). - */ -/* NVSIZE: - * This symbol contains the sizeof(NV). - */ -/* NV_PRESERVES_UV: - * This symbol, if defined, indicates that a variable of type NVTYPE - * can preserve all the bits of a variable of type UVTYPE. - */ -/* NV_PRESERVES_UV_BITS: - * This symbol contains the number of bits a variable of type NVTYPE - * can preserve of a variable of type UVTYPE. - */ -/* NV_OVERFLOWS_INTEGERS_AT: - * This symbol gives the largest integer value that NVs can hold. This - * value + 1.0 cannot be stored accurately. It is expressed as constant - * floating point expression to reduce the chance of decimal/binary - * conversion issues. If it can not be determined, the value 0 is given. - */ -/* NV_ZERO_IS_ALLBITS_ZERO: - * This symbol, if defined, indicates that a variable of type NVTYPE - * stores 0.0 in memory as all bits zero. - */ -#define IVTYPE long /**/ -#define UVTYPE unsigned long /**/ -#define I8TYPE char /**/ -#define U8TYPE unsigned char /**/ -#define I16TYPE short /**/ -#define U16TYPE unsigned short /**/ -#define I32TYPE long /**/ -#define U32TYPE unsigned long /**/ -#ifdef HAS_QUAD -#define I64TYPE __int64 /**/ -#define U64TYPE unsigned __int64 /**/ -#endif -#define NVTYPE double /**/ -#define IVSIZE 4 /**/ -#define UVSIZE 4 /**/ -#define I8SIZE 1 /**/ -#define U8SIZE 1 /**/ -#define I16SIZE 2 /**/ -#define U16SIZE 2 /**/ -#define I32SIZE 4 /**/ -#define U32SIZE 4 /**/ -#ifdef HAS_QUAD -#define I64SIZE 8 /**/ -#define U64SIZE 8 /**/ -#endif -#define NVSIZE 8 /**/ -#define NV_PRESERVES_UV -#define NV_PRESERVES_UV_BITS 32 -#define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0 -#define NV_ZERO_IS_ALLBITS_ZERO -#if UVSIZE == 8 -# ifdef BYTEORDER -# if BYTEORDER == 0x1234 -# undef BYTEORDER -# define BYTEORDER 0x12345678 -# else -# if BYTEORDER == 0x4321 -# undef BYTEORDER -# define BYTEORDER 0x87654321 -# endif -# endif -# endif -#endif - -/* IVdf: - * This symbol defines the format string used for printing a Perl IV - * as a signed decimal integer. - */ -/* UVuf: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned decimal integer. - */ -/* UVof: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned octal integer. - */ -/* UVxf: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned hexadecimal integer in lowercase abcdef. - */ -/* UVXf: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned hexadecimal integer in uppercase ABCDEF. - */ -/* NVef: - * This symbol defines the format string used for printing a Perl NV - * using %e-ish floating point format. - */ -/* NVff: - * This symbol defines the format string used for printing a Perl NV - * using %f-ish floating point format. - */ -/* NVgf: - * This symbol defines the format string used for printing a Perl NV - * using %g-ish floating point format. - */ -#define IVdf "ld" /**/ -#define UVuf "lu" /**/ -#define UVof "lo" /**/ -#define UVxf "lx" /**/ -#define UVXf "lX" /**/ -#define NVef "e" /**/ -#define NVff "f" /**/ -#define NVgf "g" /**/ - -/* SELECT_MIN_BITS: - * This symbol holds the minimum number of bits operated by select. - * That is, if you do select(n, ...), how many bits at least will be - * cleared in the masks if some activity is detected. Usually this - * is either n or 32*ceil(n/32), especially many little-endians do - * the latter. This is only useful if you have select(), naturally. - */ -#define SELECT_MIN_BITS 32 /**/ - -/* ST_INO_SIZE: - * This variable contains the size of struct stat's st_ino in bytes. - */ -/* ST_INO_SIGN: - * This symbol holds the signedess of struct stat's st_ino. - * 1 for unsigned, -1 for signed. - */ -#define ST_INO_SIGN 1 /* st_ino sign */ -#define ST_INO_SIZE 4 /* st_ino size */ - -/* STARTPERL: - * This variable contains the string to put in front of a perl - * script to make sure (one hopes) that it runs with perl and not - * some shell. - */ -#define STARTPERL "#!perl" /**/ - -/* HAS_STDIO_STREAM_ARRAY: - * This symbol, if defined, tells that there is an array - * holding the stdio streams. - */ -/* STDIO_STREAM_ARRAY: - * This symbol tells the name of the array holding the stdio streams. - * Usual values include _iob, __iob, and __sF. - */ -/*#define HAS_STDIO_STREAM_ARRAY / **/ -#ifdef HAS_STDIO_STREAM_ARRAY -#define STDIO_STREAM_ARRAY -#endif - -/* GMTIME_MAX: - * This symbol contains the maximum value for the time_t offset that - * the system function gmtime () accepts, and defaults to 0 - */ -/* GMTIME_MIN: - * This symbol contains the minimum value for the time_t offset that - * the system function gmtime () accepts, and defaults to 0 - */ -/* LOCALTIME_MAX: - * This symbol contains the maximum value for the time_t offset that - * the system function localtime () accepts, and defaults to 0 - */ -/* LOCALTIME_MIN: - * This symbol contains the minimum value for the time_t offset that - * the system function localtime () accepts, and defaults to 0 - */ -#define GMTIME_MAX 2147483647 /**/ -#define GMTIME_MIN 0 /**/ -#define LOCALTIME_MAX 2147483647 /**/ -#define LOCALTIME_MIN 0 /**/ - -/* USE_64_BIT_INT: - * This symbol, if defined, indicates that 64-bit integers should - * be used when available. If not defined, the native integers - * will be employed (be they 32 or 64 bits). The minimal possible - * 64-bitness is used, just enough to get 64-bit integers into Perl. - * This may mean using for example "long longs", while your memory - * may still be limited to 2 gigabytes. - */ -/* USE_64_BIT_ALL: - * This symbol, if defined, indicates that 64-bit integers should - * be used when available. If not defined, the native integers - * will be used (be they 32 or 64 bits). The maximal possible - * 64-bitness is employed: LP64 or ILP64, meaning that you will - * be able to use more than 2 gigabytes of memory. This mode is - * even more binary incompatible than USE_64_BIT_INT. You may not - * be able to run the resulting executable in a 32-bit CPU at all or - * you may need at least to reboot your OS to 64-bit mode. - */ -#ifndef USE_64_BIT_INT -/*#define USE_64_BIT_INT / **/ -#endif -#ifndef USE_64_BIT_ALL -/*#define USE_64_BIT_ALL / **/ -#endif - -/* USE_DTRACE: - * This symbol, if defined, indicates that Perl should - * be built with support for DTrace. - */ -/*#define USE_DTRACE / **/ - -/* USE_FAST_STDIO: - * This symbol, if defined, indicates that Perl should - * be built to use 'fast stdio'. - * Defaults to define in Perls 5.8 and earlier, to undef later. - */ -#ifndef USE_FAST_STDIO -/*#define USE_FAST_STDIO / **/ -#endif - -/* USE_LARGE_FILES: - * This symbol, if defined, indicates that large file support - * should be used when available. - */ -#ifndef USE_LARGE_FILES -/*#define USE_LARGE_FILES / **/ -#endif - -/* USE_LONG_DOUBLE: - * This symbol, if defined, indicates that long doubles should - * be used when available. - */ -#ifndef USE_LONG_DOUBLE -/*#define USE_LONG_DOUBLE / **/ -#endif - -/* USE_MORE_BITS: - * This symbol, if defined, indicates that 64-bit interfaces and - * long doubles should be used when available. - */ -#ifndef USE_MORE_BITS -/*#define USE_MORE_BITS / **/ -#endif - -/* MULTIPLICITY: - * This symbol, if defined, indicates that Perl should - * be built to use multiplicity. - */ -#ifndef MULTIPLICITY -/*#define MULTIPLICITY / **/ -#endif - -/* USE_PERLIO: - * This symbol, if defined, indicates that the PerlIO abstraction should - * be used throughout. If not defined, stdio should be - * used in a fully backward compatible manner. - */ -#ifndef USE_PERLIO -/*#define USE_PERLIO / **/ -#endif - -/* USE_SOCKS: - * This symbol, if defined, indicates that Perl should - * be built to use socks. - */ -#ifndef USE_SOCKS -/*#define USE_SOCKS / **/ -#endif - -/* HAS_DRAND48_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the drand48() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern double drand48(void); - */ -/*#define HAS_DRAND48_PROTO / **/ - -/* HAS_GETHOST_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for gethostent(), gethostbyname(), and - * gethostbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#define HAS_GETHOST_PROTOS /**/ - -/* HAS_GETNET_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getnetent(), getnetbyname(), and - * getnetbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -/*#define HAS_GETNET_PROTOS / **/ - -/* HAS_GETPROTO_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getprotoent(), getprotobyname(), and - * getprotobyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#define HAS_GETPROTO_PROTOS /**/ - -/* HAS_GETSERV_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getservent(), getservbyname(), and - * getservbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#define HAS_GETSERV_PROTOS /**/ - -/* HAS_LSEEK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the lseek() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern off_t lseek(int, off_t, int); - */ -#define HAS_LSEEK_PROTO /**/ - -/* Netdb_host_t: - * This symbol holds the type used for the 1st argument - * to gethostbyaddr(). - */ -/* Netdb_hlen_t: - * This symbol holds the type used for the 2nd argument - * to gethostbyaddr(). - */ -/* Netdb_name_t: - * This symbol holds the type used for the argument to - * gethostbyname(). - */ -/* Netdb_net_t: - * This symbol holds the type used for the 1st argument to - * getnetbyaddr(). - */ -#define Netdb_host_t char * /**/ -#define Netdb_hlen_t int /**/ -#define Netdb_name_t char * /**/ -#define Netdb_net_t long /**/ - -/* Select_fd_set_t: - * This symbol holds the type used for the 2nd, 3rd, and 4th - * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET - * is defined, and 'int *' otherwise. This is only useful if you - * have select(), of course. - */ -#define Select_fd_set_t Perl_fd_set * /**/ - -/* Sock_size_t: - * This symbol holds the type used for the size argument of - * various socket calls (just the base type, not the pointer-to). - */ -#define Sock_size_t int /**/ - -/* HAS_TIME: - * This symbol, if defined, indicates that the time() routine exists. - */ -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case should be - * included). - */ -#define HAS_TIME /**/ -#define Time_t time_t /* Time type */ - -/* HAS_TIMES: - * This symbol, if defined, indicates that the times() routine exists. - * Note that this became obsolete on some systems (SUNOS), which now - * use getrusage(). It may be necessary to include . - */ -#define HAS_TIMES /**/ - -/* Fpos_t: - * This symbol holds the type used to declare file positions in libc. - * It can be fpos_t, long, uint, etc... It may be necessary to include - * to get any typedef'ed information. - */ -#define Fpos_t fpos_t /* File position type */ - -/* Gid_t_f: - * This symbol defines the format string used for printing a Gid_t. - */ -#define Gid_t_f "d" /**/ - -/* Gid_t_sign: - * This symbol holds the signedess of a Gid_t. - * 1 for unsigned, -1 for signed. - */ -#define Gid_t_sign -1 /* GID sign */ - -/* Gid_t_size: - * This symbol holds the size of a Gid_t in bytes. - */ -#define Gid_t_size 4 /* GID size */ - -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. It can be int, ushort, - * gid_t, etc... It may be necessary to include to get - * any typedef'ed information. - */ -#define Gid_t gid_t /* Type for getgid(), etc... */ - -/* Off_t: - * This symbol holds the type used to declare offsets in the kernel. - * It can be int, long, off_t, etc... It may be necessary to include - * to get any typedef'ed information. - */ -/* LSEEKSIZE: - * This symbol holds the number of bytes used by the Off_t. - */ -/* Off_t_size: - * This symbol holds the number of bytes used by the Off_t. - */ -#define Off_t long /* type */ -#define LSEEKSIZE 4 /* size */ -#define Off_t_size 4 /* size */ - -/* Mode_t: - * This symbol holds the type used to declare file modes - * for systems calls. It is usually mode_t, but may be - * int or unsigned short. It may be necessary to include - * to get any typedef'ed information. - */ -#define Mode_t mode_t /* file mode parameter for system calls */ - -/* Pid_t: - * This symbol holds the type used to declare process ids in the kernel. - * It can be int, uint, pid_t, etc... It may be necessary to include - * to get any typedef'ed information. - */ -#define Pid_t int /* PID type */ - -/* Size_t_size: - * This symbol holds the size of a Size_t in bytes. - */ -#define Size_t_size 4 /**/ - -/* Size_t: - * This symbol holds the type used to declare length parameters - * for string functions. It is usually size_t, but may be - * unsigned long, int, etc. It may be necessary to include - * to get any typedef'ed information. - */ -#define Size_t size_t /* length parameter for string functions */ - -/* Uid_t_f: - * This symbol defines the format string used for printing a Uid_t. - */ -#define Uid_t_f "d" /**/ - -/* Uid_t_sign: - * This symbol holds the signedess of a Uid_t. - * 1 for unsigned, -1 for signed. - */ -#define Uid_t_sign -1 /* UID sign */ - -/* Uid_t_size: - * This symbol holds the size of a Uid_t in bytes. - */ -#define Uid_t_size 4 /* UID size */ - -/* Uid_t: - * This symbol holds the type used to declare user ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * to get any typedef'ed information. - */ -#define Uid_t uid_t /* UID type */ - -#endif diff --git a/win32/config_sh.PL b/win32/config_sh.PL index 2c319b5..9b26027 100644 --- a/win32/config_sh.PL +++ b/win32/config_sh.PL @@ -90,15 +90,11 @@ else { } if (exists $opt{cc}) { - # cl and bcc32 version detection borrowed from Test::Smoke's configsmoke.pl + # cl version detection borrowed from Test::Smoke's configsmoke.pl if ($opt{cc} eq 'cl') { my $output = `cl --version 2>&1`; $opt{ccversion} = $output =~ /^.*Version\s+([\d.]+)/ ? $1 : '?'; } - elsif ($opt{cc} eq 'bcc32') { - my $output = `bcc32 --version 2>&1`; - $opt{ccversion} = $output =~ /([\d.]+)/ ? $1 : '?'; - } elsif ($opt{cc} =~ /\bgcc\b/) { chomp($opt{gccversion} = `$opt{cc} -dumpversion`); } @@ -120,9 +116,8 @@ unless (defined $ENV{SYSTEMROOT}) { # SystemRoot has been introduced by WinNT # change the lseeksize and lseektype from their canned default values (which # are set-up for a non-uselargefiles build) if we are building with -# uselargefiles. don't do this for bcc32: the code contains special handling -# for bcc32 and the lseeksize and lseektype should not be changed. -if ($opt{uselargefiles} eq 'define' and $opt{cc} ne 'bcc32') { +# uselargefiles. +if ($opt{uselargefiles} eq 'define') { $opt{lseeksize} = 8; if ($opt{cc} eq 'cl') { $opt{lseektype} = '__int64'; diff --git a/win32/fcrypt.c b/win32/fcrypt.c index ff132d3..4c9f273 100644 --- a/win32/fcrypt.c +++ b/win32/fcrypt.c @@ -9,10 +9,6 @@ * eay@psych.psy.uq.oz.au */ -#if defined(__BORLANDC__) -#pragma warn -8004 /* "'foo' is assigned a value that is never used" */ -#endif - typedef unsigned char des_cblock[8]; typedef struct des_ks_struct diff --git a/win32/makefile.mk b/win32/makefile.mk index 945ca9e..f23d8fa 100644 --- a/win32/makefile.mk +++ b/win32/makefile.mk @@ -2,7 +2,6 @@ # Makefile to build perl on Windows using DMAKE. # Supported compilers: # Microsoft Visual C++ 6.0 or later -# Borland C++ 5.02 or later # MinGW with gcc-3.2 or later # Windows SDK 64-bit compiler and tools # @@ -117,19 +116,10 @@ USE_LARGE_FILES *= define #CCTYPE = MSVC100FREE # Visual C++ 2010 (aka Visual C++ 10.x) (full version) #CCTYPE = MSVC100 -# Borland 5.02 or later -#CCTYPE *= BORLAND # MinGW or mingw-w64 with gcc-3.2 or later CCTYPE *= GCC # -# uncomment this if your Borland compiler is older than v5.4. -#BCCOLD *= define -# -# uncomment this if you want to use Borland's VCL as your CRT -#BCCVCL *= define - -# # uncomment this if you are compiling under Windows 95/98 and command.com # (not needed if you're running under 4DOS/NT 6.01 or later) #IS_WIN95 *= define @@ -191,9 +181,7 @@ CCTYPE *= GCC # so you may have to set CCHOME explicitly (spaces in the path name should # not be quoted) # -.IF "$(CCTYPE)" == "BORLAND" -CCHOME *= C:\Borland\BCC55 -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" CCHOME *= C:\MinGW .ELSE CCHOME *= $(MSVCDIR) @@ -400,65 +388,7 @@ INST_HTML = $(INST_TOP)$(INST_VER)\html .USESHELL : -.IF "$(CCTYPE)" == "BORLAND" - -CC = bcc32 -.IF "$(BCCOLD)" != "define" -LINK32 = ilink32 -.ELSE -LINK32 = tlink32 -.ENDIF -LIB32 = tlib /a /P128 -IMPLIB = implib -c -RSC = brcc32 - -# -# Options -# -INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)" -#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch -DEFINES = -DWIN32 -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -P - -LIBC = cw32mti.lib - -# same libs as MSVC, except Borland doesn't have oldnames.lib -LIBFILES = \ - kernel32.lib user32.lib gdi32.lib winspool.lib \ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ - netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \ - version.lib odbc32.lib odbccp32.lib comctl32.lib \ - import32.lib $(LIBC) - -.IF "$(CFG)" == "Debug" -OPTIMIZE = -v -D_RTLDLL -DDEBUGGING -LINK_DBG = -v -.ELSE -OPTIMIZE = -O2 -D_RTLDLL -LINK_DBG = -.ENDIF - -EXTRACFLAGS = -CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \ - $(PCHFLAGS) $(OPTIMIZE) -LINK_FLAGS = $(LINK_DBG) -x -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \ - -L"$(CCLIBDIR)\PSDK" -OBJOUT_FLAG = -o -EXEOUT_FLAG = -e -LIBOUT_FLAG = -.IF "$(BCCOLD)" != "define" -LINK_FLAGS += -Gn -DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410 -.END -.IF "$(BCCVCL)" == "define" -LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib -LINK_FLAGS += -L"$(CCLIBDIR)\Release" -.END - - -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" .IF "$(GCCCROSS)" == "define" ARCHPREFIX = x86_64-w64-mingw32- @@ -670,10 +600,7 @@ LKPOST = ) $(NOOP) $(o).dll: -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def - $(IMPLIB) $(*B).lib $@ -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES) $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@ .ELSE @@ -729,7 +656,6 @@ PERLDEP = perldll.def PL2BAT = bin\pl2bat.pl -GLOBBAT = bin\perlglob.bat UTILS = \ ..\utils\h2ph \ @@ -768,12 +694,7 @@ UTILS = \ bin\perlglob.pl \ bin\search.pl -.IF "$(CCTYPE)" == "BORLAND" - -CFGSH_TMPL = config.bc -CFGH_TMPL = config_H.bc - -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" .IF "$(WIN64)" == "define" .IF "$(GCCCROSS)" == "define" @@ -1096,11 +1017,7 @@ CHECKDMAKE : .ENDIF $(GLOBEXE) : perlglob$(o) -.IF "$(CCTYPE)" == "BORLAND" - $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c - $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \ - "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib, -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES) .ELSE $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ @@ -1133,8 +1050,6 @@ config.w32 : $(CFGSH_TMPL) # this target to regenerate config_H.gc. # unfortunately, some further manual editing is also then required to restore all # the special _MSC_VER handling that is otherwise lost. -# repeat for config.bc and config_H.bc (using BORLAND), except that there is no -# _MSC_VER stuff in that case. regen_config_h: $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \ $(CFGSH_TMPL) > ..\config.sh @@ -1157,12 +1072,7 @@ $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) -.IF "$(CCTYPE)" == "BORLAND" - if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \ - cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL) - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(MINI_OBJ),$@,,$(LIBFILES),) -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST)) .ELSE @@ -1211,12 +1121,7 @@ perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibs $(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpd -ap $(BLINK_FLAGS) \ - @$(mktmp c0d32$(o) $(PERLDLL_OBJ),$@,, \ - $(shell @type Extensions_static) $(LIBFILES),perldll.def) - $(IMPLIB) $*.lib $@ -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(PERLDLL_OBJ) \ $(shell @type Extensions_static) \ @@ -1240,11 +1145,7 @@ $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static $(XCOPY) $(PERLIMPLIB) $(COREDIR) $(PERLSTATICLIB): Extensions_static -.IF "$(CCTYPE)" == "BORLAND" - $(LIB32) $(LIB_FLAGS) $@ \ - @$(mktmp $(shell @type Extensions_static) \ - $(PERLDLL_OBJ)) -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" # XXX: It would be nice if MinGW's ar accepted a temporary file, but this # doesn't seem to work: # $(LIB32) $(LIB_FLAGS) $@ \ @@ -1282,10 +1183,7 @@ $(MINIMOD) : $(MINIPERL) ..\minimod.pl $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions $(MINIPERL) -I..\lib ..\x2p\find2perl.PL $(MINIPERL) -I..\lib ..\x2p\s2p.PL -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(X2P_OBJ),$@,,$(LIBFILES),) -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" $(LINK32) -v -o $@ $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST)) .ELSE @@ -1304,10 +1202,7 @@ $(BITCOUNT_H) : $(GENUUDMAP) $(GENUUDMAP_OBJ) : ..\mg_raw.h $(GENUUDMAP) : $(GENUUDMAP_OBJ) -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(GENUUDMAP_OBJ),$@,,$(LIBFILES),) -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" $(LINK32) -v -o $@ $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST)) .ELSE @@ -1329,11 +1224,7 @@ perlmainst$(o) : perlmainst.c $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(PERLEXE_OBJ),$@,, \ - $(PERLIMPLIB) $(LIBFILES),,$(PERLEXE_RES)) -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) .ELSE @@ -1345,12 +1236,7 @@ $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES) -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(PERLEXEST_OBJ),$@,, \ - $(shell @type Extensions_static) $(PERLSTATICLIB) $(LIBFILES),, \ - $(PERLEXE_RES)) -.ELIF "$(CCTYPE)" == "GCC" +.IF "$(CCTYPE)" == "GCC" $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(shell @type Extensions_static) \ $(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) \ @@ -1594,11 +1480,7 @@ minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils $(XCOPY) $(MINIPERL) ..\t\$(NULL) if exist ..\t\perl.exe del /f ..\t\perl.exe rename ..\t\miniperl.exe perl.exe -.IF "$(CCTYPE)" == "BORLAND" - $(XCOPY) $(GLOBBAT) ..\t\$(NULL) -.ELSE $(XCOPY) $(GLOBEXE) ..\t\$(NULL) -.ENDIF attrib -r ..\t\*.* cd ..\t && \ $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t @@ -1606,11 +1488,7 @@ minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils test-prep : all utils ..\pod\perltoc.pod $(XCOPY) $(PERLEXE) ..\t\$(NULL) $(XCOPY) $(PERLDLL) ..\t\$(NULL) -.IF "$(CCTYPE)" == "BORLAND" - $(XCOPY) $(GLOBBAT) ..\t\$(NULL) -.ELSE $(XCOPY) $(GLOBEXE) ..\t\$(NULL) -.ENDIF .IF "$(CCTYPE)" == "GCC" # If building with gcc versions 4.x.x or greater, then @@ -1649,11 +1527,7 @@ test-notty : test-prep _test : $(RIGHTMAKE) $(XCOPY) $(PERLEXE) ..\t\$(NULL) $(XCOPY) $(PERLDLL) ..\t\$(NULL) -.IF "$(CCTYPE)" == "BORLAND" - $(XCOPY) $(GLOBBAT) ..\t\$(NULL) -.ELSE $(XCOPY) $(GLOBEXE) ..\t\$(NULL) -.ENDIF set PERL_STATIC_EXT=$(STATIC_EXT) && \ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES) diff --git a/win32/perlhost.h b/win32/perlhost.h index 677da4d..02ecf10 100644 --- a/win32/perlhost.h +++ b/win32/perlhost.h @@ -840,21 +840,6 @@ PerlStdIOFdupopen(struct IPerlStdIO* piPerl, FILE* pf) int fileno = win32_dup(win32_fileno(pf)); /* open the file in the same mode */ -#ifdef __BORLANDC__ - if((pf)->flags & _F_READ) { - mode[0] = 'r'; - mode[1] = 0; - } - else if((pf)->flags & _F_WRIT) { - mode[0] = 'a'; - mode[1] = 0; - } - else if((pf)->flags & _F_RDWR) { - mode[0] = 'r'; - mode[1] = '+'; - mode[2] = 0; - } -#else if((pf)->_flag & _IOREAD) { mode[0] = 'r'; mode[1] = 0; @@ -868,7 +853,6 @@ PerlStdIOFdupopen(struct IPerlStdIO* piPerl, FILE* pf) mode[1] = '+'; mode[2] = 0; } -#endif /* it appears that the binmode is attached to the * file descriptor so binmode files will be handled diff --git a/win32/perllib.c b/win32/perllib.c index 526a4a1..e838d0c 100644 --- a/win32/perllib.c +++ b/win32/perllib.c @@ -281,7 +281,7 @@ RunPerl(int argc, char **argv, char **env) } #endif - /* At least the Borland RTL wants to free argv[] after main() returns. */ + /* Some RTLs may want to free argv[] after main() returns. */ argv[0] = arg0; if (ansi) win32_free(ansi); diff --git a/win32/sync_ext.pl b/win32/sync_ext.pl deleted file mode 100644 index cb09285..0000000 --- a/win32/sync_ext.pl +++ /dev/null @@ -1,71 +0,0 @@ -=begin comment - -Synchronize filename cases for extensions. - -This script could be used to perform following renaming: -if there exist file, for example, "FiLeNaME.c" and -filename.obj then it renames "filename.obj" to "FiLeNaME.obj". -There is a problem when some compilers (e.g.Borland) generate -such .obj files and then "make" process will not treat them -as dependant and already maked files. - -This script takes two arguments - first and second extensions to -synchronize filename cases with. - -There may be specified following options: - --verbose <== say everything what is going on - --recurse <== recurse subdirectories - --dummy <== do not perform actual renaming - --say-subdir -Every such option can be specified with an optional "no" prefix to negate it. - -Typically, it is invoked as: - perl sync_ext.pl c obj --verbose - -=cut - -use strict; - -my ($ext1, $ext2) = map {quotemeta} grep {!/^--/} @ARGV; -my %opts = ( - #defaults - 'verbose' => 0, - 'recurse' => 1, - 'dummy' => 0, - 'say-subdir' => 0, - #options itself - (map {/^--([\-_\w]+)=(.*)$/} @ARGV), # --opt=smth - (map {/^no-?(.*)$/i?($1=>0):($_=>1)} map {/^--([\-_\w]+)$/} @ARGV), # --opt --no-opt --noopt - ); - -my $sp = ''; -sub xx { - opendir DIR, '.'; - my @t = readdir DIR; - my @f = map {/^(.*)\.$ext1$/i} @t; - my %f = map {lc($_)=>$_} map {/^(.*)\.$ext2$/i} @t; - for (@f) { - my $lc = lc($_); - if (exists $f{$lc} and $f{$lc} ne $_) { - print STDERR "$sp$f{$lc}.$ext2 <==> $_.$ext1\n" if $opts{verbose}; - if ($opts{dummy}) { - print STDERR "ren $f{$lc}.$ext2 $_.$ext2\n"; - } - else { - system "ren $f{$lc}.$ext2 $_.$ext2"; - } - } - } - if ($opts{recurse}) { - for (grep {-d&&!/^\.\.?$/} @t) { - print STDERR "$sp\\$_\n" if $opts{'say-subdir'}; - $sp .= ' '; - chdir $_ or die; - xx(); - chdir ".." or die; - chop $sp; - } - } -} - -xx(); diff --git a/win32/win32.c b/win32/win32.c index e67a735..89413fc 100644 --- a/win32/win32.c +++ b/win32/win32.c @@ -89,11 +89,6 @@ int _fcloseall(); END_EXTERN_C #endif -#if defined(__BORLANDC__) -# define _stat stat -# define _utimbuf utimbuf -#endif - #define EXECF_EXEC 1 #define EXECF_SPAWN 2 #define EXECF_SPAWN_NOWAIT 3 @@ -137,16 +132,6 @@ END_EXTERN_C static OSVERSIONINFO g_osver = {0, 0, 0, 0, 0, ""}; -#ifdef __BORLANDC__ -/* Silence STDERR grumblings from Borland's math library. */ -DllExport int -_matherr(struct _exception *a) -{ - PERL_UNUSED_VAR(a); - return 1; -} -#endif - /* VS2005 (MSC version 14) provides a mechanism to set an invalid * parameter handler. This functionality is not available in the * 64-bit compiler from the Platform SDK, which unfortunately also @@ -1483,8 +1468,8 @@ win32_stat(const char *path, Stat_t *sbuf) } if (S_ISDIR(sbuf->st_mode)) { /* Ensure the "write" bit is switched off in the mode for - * directories with the read-only attribute set. Borland (at least) - * switches it on for directories, which is technically correct + * directories with the read-only attribute set. Some compilers + * switch it on for directories, which is technically correct * (directories are indeed always writable unless denied by DACLs), * but we want stat() and -w to reflect the state of the read-only * attribute for symmetry with chmod(). */ @@ -1493,29 +1478,6 @@ win32_stat(const char *path, Stat_t *sbuf) sbuf->st_mode &= ~S_IWRITE; } } -#ifdef __BORLANDC__ - if (S_ISDIR(sbuf->st_mode)) { - sbuf->st_mode |= S_IEXEC; - } - else if (S_ISREG(sbuf->st_mode)) { - int perms; - if (l >= 4 && path[l-4] == '.') { - const char *e = path + l - 3; - if (strnicmp(e,"exe",3) - && strnicmp(e,"bat",3) - && strnicmp(e,"com",3) - && strnicmp(e,"cmd",3)) - sbuf->st_mode &= ~S_IEXEC; - else - sbuf->st_mode |= S_IEXEC; - } - else - sbuf->st_mode &= ~S_IEXEC; - /* Propagate permissions to _group_ and _others_ */ - perms = sbuf->st_mode & (S_IREAD|S_IWRITE|S_IEXEC); - sbuf->st_mode |= (perms>>3) | (perms>>6); - } -#endif } return res; } @@ -1997,8 +1959,7 @@ win32_uname(struct utsname *name) char *arch; GetSystemInfo(&info); -#if (defined(__BORLANDC__)&&(__BORLANDC__<=0x520)) \ - || (defined(__MINGW32__) && !defined(_ANONYMOUS_UNION) && !defined(__MINGW_EXTENSION)) +#if (defined(__MINGW32__) && !defined(_ANONYMOUS_UNION) && !defined(__MINGW_EXTENSION)) procarch = info.u.s.wProcessorArchitecture; #else procarch = info.wProcessorArchitecture; @@ -2464,7 +2425,7 @@ win32_feof(FILE *fp) DllExport char * win32_strerror(int e) { -#if !defined __BORLANDC__ && !defined __MINGW32__ /* compiler intolerance */ +#if !defined __MINGW32__ /* compiler intolerance */ extern int sys_nerr; #endif @@ -2662,14 +2623,10 @@ DllExport Off_t win32_ftell(FILE *pf) { #if defined(WIN64) || defined(USE_LARGE_FILES) -#if defined(__BORLANDC__) /* buk */ - return win32_tell( fileno( pf ) ); -#else fpos_t pos; if (fgetpos(pf, &pos)) return -1; return (Off_t)pos; -#endif #else return ftell(pf); #endif @@ -2679,13 +2636,6 @@ DllExport int win32_fseek(FILE *pf, Off_t offset,int origin) { #if defined(WIN64) || defined(USE_LARGE_FILES) -#if defined(__BORLANDC__) /* buk */ - return win32_lseek( - fileno(pf), - offset, - origin - ); -#else fpos_t pos; switch (origin) { case SEEK_CUR: @@ -2705,7 +2655,6 @@ win32_fseek(FILE *pf, Off_t offset,int origin) return -1; } return fsetpos(pf, &offset); -#endif #else return fseek(pf, (long)offset, origin); #endif @@ -2714,25 +2663,13 @@ win32_fseek(FILE *pf, Off_t offset,int origin) DllExport int win32_fgetpos(FILE *pf,fpos_t *p) { -#if defined(__BORLANDC__) && defined(USE_LARGE_FILES) /* buk */ - if( win32_tell(fileno(pf)) == -1L ) { - errno = EBADF; - return -1; - } - return 0; -#else return fgetpos(pf, p); -#endif } DllExport int win32_fsetpos(FILE *pf,const fpos_t *p) { -#if defined(__BORLANDC__) && defined(USE_LARGE_FILES) /* buk */ - return win32_lseek(fileno(pf), *p, SEEK_CUR); -#else return fsetpos(pf, p); -#endif } DllExport void @@ -2762,9 +2699,6 @@ win32_tmpfd(void) if (fh != INVALID_HANDLE_VALUE) { int fd = win32_open_osfhandle((intptr_t)fh, 0); if (fd >= 0) { -#if defined(__BORLANDC__) - setmode(fd,O_BINARY); -#endif DEBUG_p(PerlIO_printf(Perl_debug_log, "Created tmpfile=%s\n",filename)); return fd; @@ -2794,50 +2728,10 @@ win32_abort(void) DllExport int win32_fstat(int fd, Stat_t *sbufptr) { -#ifdef __BORLANDC__ - /* A file designated by filehandle is not shown as accessible - * for write operations, probably because it is opened for reading. - * --Vadim Konovalov - */ - BY_HANDLE_FILE_INFORMATION bhfi; -# if defined(WIN64) || defined(USE_LARGE_FILES) - /* Borland 5.5.1 has a 64-bit stat, but only a 32-bit fstat */ - struct stat tmp; - int rc = fstat(fd,&tmp); - - sbufptr->st_dev = tmp.st_dev; - sbufptr->st_ino = tmp.st_ino; - sbufptr->st_mode = tmp.st_mode; - sbufptr->st_nlink = tmp.st_nlink; - sbufptr->st_uid = tmp.st_uid; - sbufptr->st_gid = tmp.st_gid; - sbufptr->st_rdev = tmp.st_rdev; - sbufptr->st_size = tmp.st_size; - sbufptr->st_atime = tmp.st_atime; - sbufptr->st_mtime = tmp.st_mtime; - sbufptr->st_ctime = tmp.st_ctime; -# else - int rc = fstat(fd,sbufptr); -# endif - - if (GetFileInformationByHandle((HANDLE)_get_osfhandle(fd), &bhfi)) { -# if defined(WIN64) || defined(USE_LARGE_FILES) - sbufptr->st_size = ((__int64)bhfi.nFileSizeHigh << 32) | bhfi.nFileSizeLow ; -# endif - sbufptr->st_mode &= 0xFE00; - if (bhfi.dwFileAttributes & FILE_ATTRIBUTE_READONLY) - sbufptr->st_mode |= (S_IREAD + (S_IREAD >> 3) + (S_IREAD >> 6)); - else - sbufptr->st_mode |= ((S_IREAD|S_IWRITE) + ((S_IREAD|S_IWRITE) >> 3) - + ((S_IREAD|S_IWRITE) >> 6)); - } - return rc; -#else -# if defined(WIN64) || defined(USE_LARGE_FILES) +#if defined(WIN64) || defined(USE_LARGE_FILES) return _fstati64(fd, sbufptr); -# else +#else return fstat(fd, sbufptr); -# endif #endif } @@ -3129,23 +3023,7 @@ DllExport Off_t win32_lseek(int fd, Off_t offset, int origin) { #if defined(WIN64) || defined(USE_LARGE_FILES) -#if defined(__BORLANDC__) /* buk */ - LARGE_INTEGER pos; - pos.QuadPart = offset; - pos.LowPart = SetFilePointer( - (HANDLE)_get_osfhandle(fd), - pos.LowPart, - &pos.HighPart, - origin - ); - if (pos.LowPart == INVALID_SET_FILE_POINTER && GetLastError() != NO_ERROR) { - pos.QuadPart = -1; - } - - return pos.QuadPart; -#else return _lseeki64(fd, offset, origin); -#endif #else return lseek(fd, (long)offset, origin); #endif @@ -3155,24 +3033,7 @@ DllExport Off_t win32_tell(int fd) { #if defined(WIN64) || defined(USE_LARGE_FILES) -#if defined(__BORLANDC__) /* buk */ - LARGE_INTEGER pos; - pos.QuadPart = 0; - pos.LowPart = SetFilePointer( - (HANDLE)_get_osfhandle(fd), - pos.LowPart, - &pos.HighPart, - FILE_CURRENT - ); - if (pos.LowPart == INVALID_SET_FILE_POINTER && GetLastError() != NO_ERROR) { - pos.QuadPart = -1; - } - - return pos.QuadPart; - /* return tell(fd); */ -#else return _telli64(fd); -#endif #else return tell(fd); #endif @@ -3774,17 +3635,9 @@ win32_execv(const char *cmdname, const char *const *argv) /* if this is a pseudo-forked child, we just want to spawn * the new program, and return */ if (w32_pseudo_id) -# ifdef __BORLANDC__ - return spawnv(P_WAIT, cmdname, (char *const *)argv); -# else return spawnv(P_WAIT, cmdname, argv); -# endif #endif -#ifdef __BORLANDC__ - return execv(cmdname, (char *const *)argv); -#else return execv(cmdname, argv); -#endif } DllExport int @@ -3804,11 +3657,7 @@ win32_execvp(const char *cmdname, const char *const *argv) return status; } #endif -#ifdef __BORLANDC__ - return execvp(cmdname, (char *const *)argv); -#else return execvp(cmdname, argv); -#endif } DllExport void @@ -4027,21 +3876,6 @@ win32_fdupopen(FILE *pf) int fileno = win32_dup(win32_fileno(pf)); /* open the file in the same mode */ -#ifdef __BORLANDC__ - if((pf)->flags & _F_READ) { - mode[0] = 'r'; - mode[1] = 0; - } - else if((pf)->flags & _F_WRIT) { - mode[0] = 'a'; - mode[1] = 0; - } - else if((pf)->flags & _F_RDWR) { - mode[0] = 'r'; - mode[1] = '+'; - mode[2] = 0; - } -#else if((pf)->_flag & _IOREAD) { mode[0] = 'r'; mode[1] = 0; @@ -4055,7 +3889,6 @@ win32_fdupopen(FILE *pf) mode[1] = '+'; mode[2] = 0; } -#endif /* it appears that the binmode is attached to the * file descriptor so binmode files will be handled @@ -4129,12 +3962,7 @@ Perl_init_os_extras(void) /* Initialize Win32CORE if it has been statically linked. */ void (*pfn_init)(pTHX); -#if defined(__BORLANDC__) - /* makedef.pl seems to have given up on fixing this issue in the .def file */ - pfn_init = (void (*)(pTHX))GetProcAddress((HMODULE)w32_perldll_handle, "_init_Win32CORE"); -#else pfn_init = (void (*)(pTHX))GetProcAddress((HMODULE)w32_perldll_handle, "init_Win32CORE"); -#endif if (pfn_init) pfn_init(aTHX); @@ -4298,7 +4126,7 @@ ansify_path(void) */ SetEnvironmentVariableA("PATH", ansi_path+5); /* We are intentionally leaking the ansi_path string here because - * the Borland runtime library puts it directly into the environ + * the some runtime libraries puts it directly into the environ * array. The Microsoft runtime library seems to make a copy, * but will leak the copy should it be replaced again later. * Since this code is only called once during PERL_SYS_INIT this @@ -4319,7 +4147,7 @@ Perl_win32_init(int *argcp, char ***argvp) #endif /* Disable floating point errors, Perl will trap the ones we * care about. VC++ RTL defaults to switching these off - * already, but the Borland RTL doesn't. Since we don't + * already, but some RTLs don't. Since we don't * want to be at the vendor's whim on the default, we set * it explicitly here. */ diff --git a/win32/win32.h b/win32/win32.h index 4c58b8c..e906266 100644 --- a/win32/win32.h +++ b/win32/win32.h @@ -200,38 +200,6 @@ struct utsname { # define PERL_BITFIELD32 unsigned int #endif -#ifdef __BORLANDC__ /* Borland C++ */ - -#if (__BORLANDC__ <= 0x520) -#define _access access -#define _chdir chdir -#endif - -#define _getpid getpid -#define wcsicmp _wcsicmp -#include - -#ifndef DllMain -#define DllMain DllEntryPoint -#endif - -#pragma warn -8004 /* "'foo' is assigned a value that is never used" */ -#pragma warn -8008 /* "condition is always true/false" */ -#pragma warn -8012 /* "comparing signed and unsigned values" */ -#pragma warn -8027 /* "functions containing %s are not expanded inline" */ -#pragma warn -8057 /* "parameter 'foo' is never used" */ -#pragma warn -8060 /* "possibly incorrect assignment" */ -#pragma warn -8066 /* "unreachable code" */ -#pragma warn -8071 /* "conversion may lose significant digits" */ -#pragma warn -8080 /* "'foo' is declared but never used" */ - -/* Borland C thinks that a pointer to a member variable is 12 bytes in size. */ -#define PERL_MEMBER_PTR_SIZE 12 - -#define isnan _isnan - -#endif - #ifdef _MSC_VER /* Microsoft Visual C++ */ #ifndef UNDER_CE diff --git a/win32/win32iop-o.h b/win32/win32iop-o.h index 57b073b..6633f7a 100644 --- a/win32/win32iop-o.h +++ b/win32/win32iop-o.h @@ -178,15 +178,6 @@ END_EXTERN_C #undef uname #undef wait -#ifdef __BORLANDC__ -#undef ungetc -#undef getc -#undef putc -#undef getchar -#undef putchar -#undef fileno -#endif - #define stderr win32_stderr() #define stdout win32_stdout() #define stdin win32_stdin() diff --git a/win32/win32iop.h b/win32/win32iop.h index 4520790..373e3e3 100644 --- a/win32/win32iop.h +++ b/win32/win32iop.h @@ -190,15 +190,7 @@ END_EXTERN_C #undef uname #undef wait -#ifdef __BORLANDC__ -#undef ungetc -#undef getc -#undef putc -#undef getchar -#undef putchar -#endif - -#if defined(__MINGW32__) || defined(__BORLANDC__) +#if defined(__MINGW32__) #undef fileno #endif diff --git a/win32/win32sck.c b/win32/win32sck.c index 22cc72e..4ceb03c 100644 --- a/win32/win32sck.c +++ b/win32/win32sck.c @@ -738,11 +738,9 @@ win32_savecopyservent(struct servent*d, struct servent*s, const char *proto) d->s_name = s->s_name; d->s_aliases = s->s_aliases; d->s_port = s->s_port; -#ifndef __BORLANDC__ /* Buggy on WinNT-with-Borland-WSOCK */ if (s->s_proto && strlen(s->s_proto)) d->s_proto = s->s_proto; else -#endif if (proto && strlen(proto)) d->s_proto = (char *)proto; else diff --git a/win32/win32thread.h b/win32/win32thread.h index c6f9309..9af3aa3 100644 --- a/win32/win32thread.h +++ b/win32/win32thread.h @@ -109,10 +109,9 @@ typedef HANDLE perl_mutex; /* XXX Docs mention that the RTL versions of thread creation routines * should be used, but that advice only seems applicable when the RTL - * is not in a DLL. RTL DLLs in both Borland and VC seem to do all of - * the init/deinit required upon DLL_THREAD_ATTACH/DETACH. So we seem - * to be completely safe using straight Win32 API calls, rather than - * the much braindamaged RTL calls. + * is not in a DLL. RTL DLLs seem to do all of the init/deinit required + * upon DLL_THREAD_ATTACH/DETACH. So we seem to be completely safe using + * straight Win32 API calls, rather than the much braindamaged RTL calls. * * _beginthread() in the RTLs call CloseHandle() just after the thread * function returns, which means: 1) we have a race on our hands @@ -123,11 +122,7 @@ typedef HANDLE perl_mutex; */ #ifdef USE_RTL_THREAD_API # include -# if defined(__BORLANDC__) - /* Borland RTL doesn't allow a return value from thread function! */ -# define THREAD_RET_TYPE void _USERENTRY -# define THREAD_RET_CAST(p) ((void)(thr->i.retv = (void *)(p))) -# elif defined (_MSC_VER) +# if defined (_MSC_VER) # define THREAD_RET_TYPE unsigned __stdcall # define THREAD_RET_CAST(p) ((unsigned)(p)) # else @@ -145,7 +140,7 @@ typedef THREAD_RET_TYPE thread_func_t(void *); START_EXTERN_C -#if defined(PERLDLL) && defined(USE_DECLSPEC_THREAD) && (!defined(__BORLANDC__) || defined(_DLL)) +#if defined(PERLDLL) && defined(USE_DECLSPEC_THREAD) extern __declspec(thread) void *PL_current_context; #define PERL_SET_CONTEXT(t) (PL_current_context = t) #define PERL_GET_CONTEXT PL_current_context diff --git a/win32/wince.c b/win32/wince.c index b9163d7..8a87219 100644 --- a/win32/wince.c +++ b/win32/wince.c @@ -1498,9 +1498,6 @@ win32_tmpfd(void) if (fh != INVALID_HANDLE_VALUE) { int fd = win32_open_osfhandle((intptr_t)fh, 0); if (fd >= 0) { -#if defined(__BORLANDC__) - setmode(fd,O_BINARY); -#endif DEBUG_p(PerlIO_printf(Perl_debug_log, "Created tmpfile=%s\n",filename)); return fd; diff --git a/win32/wincesck.c b/win32/wincesck.c index 7f9e0df..9ef025d 100644 --- a/win32/wincesck.c +++ b/win32/wincesck.c @@ -483,11 +483,9 @@ win32_savecopyservent(struct servent*d, struct servent*s, const char *proto) d->s_name = s->s_name; d->s_aliases = s->s_aliases; d->s_port = s->s_port; -#ifndef __BORLANDC__ /* Buggy on Win95 and WinNT-with-Borland-WSOCK */ if (!IsWin95() && s->s_proto && strlen(s->s_proto)) d->s_proto = s->s_proto; else -#endif if (proto && strlen(proto)) d->s_proto = (char *)proto; else diff --git a/x2p/a2p.c b/x2p/a2p.c index 4186cdf..1a7a778 100644 --- a/x2p/a2p.c +++ b/x2p/a2p.c @@ -2181,7 +2181,7 @@ int yyparse (void); #define YYERROR goto yyerrlab #if YYDEBUG -# if defined(WIN32) && !defined(__BORLANDC__) +# if defined(WIN32) EXTERN_C _CRTIMP char *getenv(const char *); # else EXTERN_C char *getenv(const char *); diff --git a/x2p/a2p.h b/x2p/a2p.h index 3a01df5..af3c6e3 100644 --- a/x2p/a2p.h +++ b/x2p/a2p.h @@ -30,19 +30,6 @@ # ifndef STANDARD_C # define STANDARD_C # endif -# if defined(__BORLANDC__) -# pragma warn -ccc -# pragma warn -rch -# pragma warn -sig -# pragma warn -pia -# pragma warn -par -# pragma warn -aus -# pragma warn -use -# pragma warn -csu -# pragma warn -pro -# elif defined(_MSC_VER) -# elif defined(__MINGW32__) -# endif #endif /* Use all the "standard" definitions? */ -- 2.7.4