From 359d5a85a758906087801d7b3d3536a984211dec Mon Sep 17 00:00:00 2001 From: Wesley Cheng Date: Wed, 17 Aug 2022 11:23:51 -0700 Subject: [PATCH] usb: dwc3: Do not service EP0 and conndone events if soft disconnected There are some operations that need to be ignored if there is a soft disconnect in progress. This is to avoid having a pending EP0 transfer in progress while attempting to stop active transfers and halting the controller. There were several instances seen where a soft disconnect was able to occur during early link negotiation, i.e. bus reset/conndone, which leads to the conndone handler re-configuring EPs while attempting to halt the controller, as DEP flags are cleared as part of the soft disconnect path. ep0out: cmd 'Start New Configuration' ep0out: cmd 'Set Endpoint Transfer Resource' ep0in: cmd 'Set Endpoint Transfer Resource' ep1out: cmd 'Set Endpoint Transfer Resource' ... event (00030601): Suspend [U3] event (00000101): Reset [U0] ep0out: req ffffff87e5c9e100 length 0/0 zsI ==> 0 event (00000201): Connection Done [U0] ep0out: cmd 'Start New Configuration' ep0out: cmd 'Set Endpoint Transfer Resource' In addition, if a soft disconnect occurs, EP0 events are still allowed to process, however, it will stall/restart during the SETUP phase. The host is still able to query for the DATA phase, leading to a xfernotready(DATA) event. Since none of the SETUP transfer parameters are populated, the xfernotready is treated as a "wrong direction" error, leading to a duplicate stall/restart routine. Add the proper softconnect/connected checks in sequences that are potentially involved during soft disconnect processing. Reviewed-by: Thinh Nguyen Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/20220817182359.13550-2-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/ep0.c | 6 ++++-- drivers/usb/dwc3/gadget.c | 3 +++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 197af63..33cee00 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -197,7 +197,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, int ret; spin_lock_irqsave(&dwc->lock, flags); - if (!dep->endpoint.desc || !dwc->pullups_connected) { + if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) { dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", dep->name); ret = -ESHUTDOWN; @@ -815,7 +815,7 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, int ret = -EINVAL; u32 len; - if (!dwc->gadget_driver || !dwc->connected) + if (!dwc->gadget_driver || !dwc->softconnect || !dwc->connected) goto out; trace_dwc3_ctrl_req(ctrl); @@ -1118,6 +1118,8 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc, { switch (event->status) { case DEPEVT_STATUS_CONTROL_DATA: + if (!dwc->softconnect || !dwc->connected) + return; /* * We already have a DATA transfer in the controller's cache, * if we receive a XferNotReady(DATA) we will ignore it, unless diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7767803..406bd4d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3865,6 +3865,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) u8 lanes = 1; u8 speed; + if (!dwc->softconnect) + return; + reg = dwc3_readl(dwc->regs, DWC3_DSTS); speed = reg & DWC3_DSTS_CONNECTSPD; dwc->speed = speed; -- 2.7.4