From 35579f7e91b80b22fd072757c962e2c85b7bf948 Mon Sep 17 00:00:00 2001 From: Jeongmo Yang Date: Fri, 23 Jan 2015 17:56:56 +0900 Subject: [PATCH] Update for Tizen 3.0 Change-Id: Ifdc0aad0e74d9aec95d6c4457c8ac923f97f9aa1 Signed-off-by: Jeongmo Yang --- AUTHORS | 0 LICENSE.APLv2.0 | 0 NOTICE | 0 mmfw-sysconf-cleansdk-e4x12.manifest | 5 - mmfw-sysconf-cleansdk-e4x12/etc/pulse/client.conf | 33 --- mmfw-sysconf-cleansdk-e4x12/etc/pulse/daemon.conf | 81 ------ mmfw-sysconf-cleansdk-e4x12/etc/pulse/system.pa | 68 ----- .../usr/etc/gst-openmax.conf | 55 ---- .../usr/etc/mmfw_player.ini | 97 ------- .../usr/etc/mmfw_player_audio_effect.ini | 17 -- .../alsa-mixer/paths/analog-input-aux.conf | 62 ----- .../alsa-mixer/paths/analog-input-fm.conf | 62 ----- .../alsa-mixer/paths/analog-input-linein.conf | 61 ----- .../alsa-mixer/paths/analog-input-mic-line.conf | 63 ----- .../alsa-mixer/paths/analog-input-mic.conf | 63 ----- .../alsa-mixer/paths/analog-input-mic.conf.common | 63 ----- .../alsa-mixer/paths/analog-input-tvtuner.conf | 62 ----- .../alsa-mixer/paths/analog-input-video.conf | 61 ----- .../pulseaudio/alsa-mixer/paths/analog-input.conf | 54 ---- .../alsa-mixer/paths/analog-input.conf.common | 294 --------------------- .../paths/analog-output-headphones-2.conf | 82 ------ .../alsa-mixer/paths/analog-output-headphones.conf | 82 ------ .../paths/analog-output-lfe-on-mono.conf | 85 ------ .../alsa-mixer/paths/analog-output-mono.conf | 82 ------ .../alsa-mixer/paths/analog-output-speaker.conf | 94 ------- .../pulseaudio/alsa-mixer/paths/analog-output.conf | 92 ------- .../alsa-mixer/paths/analog-output.conf.common | 128 --------- .../alsa-mixer/profile-sets/default.conf | 144 ---------- .../profile-sets/native-instruments-audio4dj.conf | 91 ------- .../profile-sets/native-instruments-audio8dj.conf | 162 ------------ mmfw-sysconf-cleansdk-target/etc/asound.conf | 23 -- mmfw-sysconf-cleansdk-target/etc/pulse/default.pa | 137 ---------- .../usr/etc/gst-openmax.conf | 55 ---- .../usr/etc/mmfw_camcorder.ini | 104 -------- .../usr/etc/mmfw_camcorder_dev_video_pri.ini | 177 ------------- .../usr/etc/mmfw_camcorder_dev_video_sec.ini | 170 ------------ .../usr/etc/mmfw_player.ini | 97 ------- mmfw-sysconf-simulator.manifest | 0 mmfw-sysconf-simulator/etc/pulse/default.pa | 0 mmfw-sysconf-simulator/etc/pulse/system.pa | 0 ...get.manifest => mmfw-sysconf-target-u3.manifest | 0 .../etc/asound.conf | 2 +- .../etc/pulse/client.conf | 6 +- .../etc/pulse/daemon.conf | 16 +- .../etc/pulse/default.pa | 68 +++-- .../etc/pulse/system.pa | 41 ++- .../opt/system/mmfw_audio_volume.ini | 45 ++++ mmfw-sysconf-target-u3/usr/etc/gst-openmax.conf | 143 ++++++++++ mmfw-sysconf-target-u3/usr/etc/gst-tz-openmax.conf | 140 ++++++++++ mmfw-sysconf-target-u3/usr/etc/mmfw_avsystem.ini | 8 + .../usr/etc/mmfw_camcorder.ini | 40 +-- .../usr/etc/mmfw_camcorder_dev_video_pri.ini | 67 ++--- mmfw-sysconf-target-u3/usr/etc/mmfw_player.ini | 127 +++++++++ .../usr/etc/mmfw_player_audio_effect.ini | 0 .../alsa-mixer/paths/analog-input-aux.conf | 0 .../alsa-mixer/paths/analog-input-fm.conf | 0 .../alsa-mixer/paths/analog-input-linein.conf | 0 .../alsa-mixer/paths/analog-input-mic-line.conf | 0 .../alsa-mixer/paths/analog-input-mic.conf | 0 .../alsa-mixer/paths/analog-input-mic.conf.common | 0 .../alsa-mixer/paths/analog-input-tvtuner.conf | 0 .../alsa-mixer/paths/analog-input-video.conf | 0 .../pulseaudio/alsa-mixer/paths/analog-input.conf | 0 .../alsa-mixer/paths/analog-input.conf.common | 0 .../paths/analog-output-headphones-2.conf | 0 .../alsa-mixer/paths/analog-output-headphones.conf | 0 .../paths/analog-output-lfe-on-mono.conf | 0 .../alsa-mixer/paths/analog-output-mono.conf | 0 .../alsa-mixer/paths/analog-output-speaker.conf | 0 .../pulseaudio/alsa-mixer/paths/analog-output.conf | 0 .../alsa-mixer/paths/analog-output.conf.common | 0 .../alsa-mixer/profile-sets/default.conf | 0 .../profile-sets/native-instruments-audio4dj.conf | 0 .../profile-sets/native-instruments-audio8dj.conf | 0 .../alsa-mixer/profile-sets/tizen_usb.conf | 120 +++++++++ packaging/mmfw-sysconf-cleansdk-e4x12.spec | 37 --- packaging/mmfw-sysconf-cleansdk-target.spec | 37 --- packaging/mmfw-sysconf-simulator.spec | 37 --- packaging/mmfw-sysconf.spec | 108 +++++++- 79 files changed, 823 insertions(+), 3225 deletions(-) mode change 100755 => 100644 AUTHORS mode change 100755 => 100644 LICENSE.APLv2.0 mode change 100755 => 100644 NOTICE delete mode 100755 mmfw-sysconf-cleansdk-e4x12.manifest delete mode 100644 mmfw-sysconf-cleansdk-e4x12/etc/pulse/client.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/etc/pulse/daemon.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/etc/pulse/system.pa delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/etc/gst-openmax.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_player.ini delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_player_audio_effect.ini delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf delete mode 100644 mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf delete mode 100644 mmfw-sysconf-cleansdk-target/etc/asound.conf delete mode 100644 mmfw-sysconf-cleansdk-target/etc/pulse/default.pa delete mode 100644 mmfw-sysconf-cleansdk-target/usr/etc/gst-openmax.conf delete mode 100644 mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder.ini delete mode 100644 mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder_dev_video_pri.ini delete mode 100644 mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder_dev_video_sec.ini delete mode 100644 mmfw-sysconf-cleansdk-target/usr/etc/mmfw_player.ini mode change 100755 => 100644 mmfw-sysconf-simulator.manifest mode change 100644 => 100755 mmfw-sysconf-simulator/etc/pulse/default.pa mode change 100644 => 100755 mmfw-sysconf-simulator/etc/pulse/system.pa rename mmfw-sysconf-cleansdk-target.manifest => mmfw-sysconf-target-u3.manifest (100%) mode change 100755 => 100644 rename {mmfw-sysconf-cleansdk-e4x12 => mmfw-sysconf-target-u3}/etc/asound.conf (97%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/etc/pulse/client.conf (87%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/etc/pulse/daemon.conf (87%) rename {mmfw-sysconf-cleansdk-e4x12 => mmfw-sysconf-target-u3}/etc/pulse/default.pa (69%) mode change 100644 => 100755 rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/etc/pulse/system.pa (58%) mode change 100644 => 100755 create mode 100644 mmfw-sysconf-target-u3/opt/system/mmfw_audio_volume.ini create mode 100644 mmfw-sysconf-target-u3/usr/etc/gst-openmax.conf create mode 100644 mmfw-sysconf-target-u3/usr/etc/gst-tz-openmax.conf create mode 100644 mmfw-sysconf-target-u3/usr/etc/mmfw_avsystem.ini rename {mmfw-sysconf-cleansdk-e4x12 => mmfw-sysconf-target-u3}/usr/etc/mmfw_camcorder.ini (79%) rename {mmfw-sysconf-cleansdk-e4x12 => mmfw-sysconf-target-u3}/usr/etc/mmfw_camcorder_dev_video_pri.ini (80%) create mode 100644 mmfw-sysconf-target-u3/usr/etc/mmfw_player.ini rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/etc/mmfw_player_audio_effect.ini (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf (100%) rename {mmfw-sysconf-cleansdk-target => mmfw-sysconf-target-u3}/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf (100%) create mode 100644 mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf delete mode 100644 packaging/mmfw-sysconf-cleansdk-e4x12.spec delete mode 100644 packaging/mmfw-sysconf-cleansdk-target.spec delete mode 100644 packaging/mmfw-sysconf-simulator.spec diff --git a/AUTHORS b/AUTHORS old mode 100755 new mode 100644 diff --git a/LICENSE.APLv2.0 b/LICENSE.APLv2.0 old mode 100755 new mode 100644 diff --git a/NOTICE b/NOTICE old mode 100755 new mode 100644 diff --git a/mmfw-sysconf-cleansdk-e4x12.manifest b/mmfw-sysconf-cleansdk-e4x12.manifest deleted file mode 100755 index a76fdba..0000000 --- a/mmfw-sysconf-cleansdk-e4x12.manifest +++ /dev/null @@ -1,5 +0,0 @@ - - - - - diff --git a/mmfw-sysconf-cleansdk-e4x12/etc/pulse/client.conf b/mmfw-sysconf-cleansdk-e4x12/etc/pulse/client.conf deleted file mode 100644 index 1ce9863..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/etc/pulse/client.conf +++ /dev/null @@ -1,33 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 -# USA. - -## Configuration file for PulseAudio clients. See pulse-client.conf(5) for -## more information. Default values a commented out. Use either ; or # for -## commenting. - -; default-sink = -; default-source = -; default-server = - -; autospawn = yes -; daemon-binary = /usr/bin/pulseaudio -; extra-arguments = --log-target=syslog - -; cookie-file = - -; enable-shm = yes -shm-size-bytes = 4194304 # setting this 0 will use the system-default, usually 64 MiB diff --git a/mmfw-sysconf-cleansdk-e4x12/etc/pulse/daemon.conf b/mmfw-sysconf-cleansdk-e4x12/etc/pulse/daemon.conf deleted file mode 100644 index 28b95c1..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/etc/pulse/daemon.conf +++ /dev/null @@ -1,81 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 -# USA. - -## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for -## more information. Default values a commented out. Use either ; or # for -## commenting. - -; daemonize = no -; fail = yes -; allow-module-loading = yes -; allow-exit = yes -; use-pid-file = yes -; system-instance = no -; enable-shm = yes -; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB -; lock-memory = no -; cpu-limit = no - -; high-priority = yes -; nice-level = -11 - -realtime-scheduling = yes -realtime-priority = 5 - -; exit-idle-time = 20 -; scache-idle-time = 20 - -; dl-search-path = (depends on architecture) - -; load-default-script-file = yes -; default-script-file = - -log-target = dlog-color -; log-level = notice -; log-meta = no -; log-time = no -; log-backtrace = 0 - -resample-method = ffmpeg -; enable-remixing = yes -; enable-lfe-remixing = no - -; flat-volumes = yes - -; rlimit-fsize = -1 -; rlimit-data = -1 -; rlimit-stack = -1 -; rlimit-core = -1 -; rlimit-as = -1 -; rlimit-rss = -1 -; rlimit-nproc = -1 -; rlimit-nofile = 256 -; rlimit-memlock = -1 -; rlimit-locks = -1 -; rlimit-sigpending = -1 -; rlimit-msgqueue = -1 -; rlimit-nice = 31 -; rlimit-rtprio = 9 -; rlimit-rttime = 1000000 - -; default-sample-format = s16le -; default-sample-rate = 44100 -; default-sample-channels = 2 -; default-channel-map = front-left,front-right - -; default-fragments = 4 -; default-fragment-size-msec = 25 diff --git a/mmfw-sysconf-cleansdk-e4x12/etc/pulse/system.pa b/mmfw-sysconf-cleansdk-e4x12/etc/pulse/system.pa deleted file mode 100644 index 8e4d955..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/etc/pulse/system.pa +++ /dev/null @@ -1,68 +0,0 @@ -#!/usr/bin/pulseaudio -nF -# -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify it -# under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -# This startup script is used only if PulseAudio is started in system -# mode. - -### Automatically load driver modules depending on the hardware available -.ifexists module-hal-detect.so -#load-module module-hal-detect -.else -### Alternatively use the static hardware detection module (for systems that -### lack HAL support) -#load-module module-detect -load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,3 -load-module module-alsa-source source_name=alsa_input.0.analog-stereo device=hw:0,0 -.endif - -### Load several protocols -.ifexists module-esound-protocol-unix.so -load-module module-esound-protocol-unix -.endif -load-module module-native-protocol-unix - -load-module module-bluetooth-discover - -### Custom policy module to route between bt<=speaker -load-module module-policy - -### Automatically restore the volume of streams and devices -#load-module module-stream-restore -#load-module module-device-restore - -### Automatically restore the default sink/source when changed by the user during runtime -load-module module-default-device-restore - -### Automatically move streams to the default sink if the sink they are -### connected to dies, similar for sources -load-module module-rescue-streams - -### Make sure we always have a sink around, even if it is a null sink. -load-module module-always-sink - -### Automatically suspend sinks/sources that become idle for too long -load-module module-suspend-on-idle - -### Enable positioned event sounds -#load-module module-position-event-sounds - -### Set default source (not to use alsa_sink monitor which is index 0) -set-default-source alsa_input.0.analog-stereo - -load-module module-remap-sink sink_name=mono_alsa master=alsa_output.0.analog-stereo channels=1 -load-sample camera-shutter /usr/share/sounds/mm-camcorder/capture_shutter_02.wav diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/etc/gst-openmax.conf b/mmfw-sysconf-cleansdk-e4x12/usr/etc/gst-openmax.conf deleted file mode 100644 index ed6f3db..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/etc/gst-openmax.conf +++ /dev/null @@ -1,55 +0,0 @@ -omx_mpeg4dec, - type=GstOmxMpeg4Dec, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.MPEG4.Decoder, - sink="video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-divx, divxversion=(int)[4,5], width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-xvid, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-3ivx, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_h264dec, - type=GstOmxH264Dec, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.AVC.Decoder, - sink="video/x-h264, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_h263dec, - type=GstOmxH263Dec, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.H263.Decoder, - sink="video/x-h263, variant=(string)itu, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_wmvdec, - type=GstOmxWmvDec, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.WMV.Decoder, - sink="video/x-wmv, wmvversion=(int)3, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_mpeg4enc, - type=GstOmxMpeg4Enc, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.MPEG4.Encoder, - sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_h264enc, - type=GstOmxH264Enc, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.AVC.Encoder, - sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-h264, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_h263enc, - type=GstOmxH263Enc, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.H263.Encoder, - sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-h263, variant=(string)itu, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_player.ini b/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_player.ini deleted file mode 100644 index a151618..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_player.ini +++ /dev/null @@ -1,97 +0,0 @@ -[general] - -; if disabled typefind element will used directely -use decodebin = no ; async state change problem exist - -use sink handler = yes - -disable segtrap = yes ; same effect with --gst-disable-segtrap - -; set default videosink element according to video surface type(X, EVAS, NULL) -videosink element x = xvimagesink -videosink element evas = evaspixmapsink -videosink element fake = fakesink - -video converter element = ffmpegcolorspace - -audiosink element = avsysaudiosink - -drmsrc element = filesrc - -; if yes. gstreamer will not update registry -skip rescan = yes -delay before repeat = 50 ; msec - -; comma separated list of tocken which elemnts has it in it's name will not be used -element exclude keyword = - -async start = yes - -multiple codec supported = yes - -; parameters for initializing gstreamer -gstparam1 = -gstparam2 = -gstparam3 = -gstparam4 = -gstparam5 = - -; generating dot file representing pipeline state -generate dot = no - -; parameter for clock provide in audiosink -provide clock = yes - -; allowed timeout for changing pipeline state -live state change timeout = 30 ; sec -localplayback state change timeout = 10 ; sec - -; delay in msec for sending EOS -eos delay = 150 ; msec - - -[http streaming] - -httpsrc element = souphttpsrc - -; if set, use file or not use memory for buffering -http file buffer path = /opt/usr/media - -http buffering limit = 99.0 ; percent - -http max size bytes = 1048576 ; bytes - -http buffering time = 1.2 - -http timeout = 30 ; sec - - -[rtsp streaming] - -rtspsrc element = rtspsrc - -rtsp buffering time = 5000; msec - -rtsp rebuffering time = 15000; msec - -rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging - -rtsp error concealment = yes - - -[hw accelation] -use video hw accel = no - - -[priority] - -use priority setting = no - -demux = 95 - -videosink = 96 - -audiosink = 97 - -ringbuffer = 98 - diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_player_audio_effect.ini b/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_player_audio_effect.ini deleted file mode 100644 index 1394608..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_player_audio_effect.ini +++ /dev/null @@ -1,17 +0,0 @@ -[audio effect] -; name of audio effect element -audio effect element = audioeq - -; preset audio effect setting -audio effect preset = no - -; custom audio effect setting (EQ/extension) -audio effect custom = yes -audio effect custom list = 0 - -audio effect custom eq band num = 7 ; number of EQ bands -audio effect custom eq band width = 33, 90, 242, 649, 1743, 4676, 12544 ; list of each EQ band width (Hz) -audio effect custom eq band freq = 36, 98, 265, 711, 1907, 5117, 13727 ; list of each EQ band central frequency (Hz) - -audio effect custom min list = -12 ; list of minimum level value (the first element is for EQ, others for extension effect) -audio effect custom max list = 12 ; list of maximum level value (the first element is for EQ, others for extension effect) diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf deleted file mode 100644 index db78eb4..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf +++ /dev/null @@ -1,62 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; For devices where an 'Aux' element exists -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 90 -name = analog-input - -[Element Capture] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Mic] -switch = off -volume = off - -[Element Line] -switch = off -volume = off - -[Element Aux] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Video] -switch = off -volume = off - -[Element Mic/Line] -switch = off -volume = off - -[Element TV Tuner] -switch = off -volume = off - -[Element FM] -switch = off -volume = off - -.include analog-input.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf deleted file mode 100644 index baf674a..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf +++ /dev/null @@ -1,62 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; For devices where an 'FM' element exists -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 70 -name = analog-input-radio - -[Element Capture] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Mic] -switch = off -volume = off - -[Element Line] -switch = off -volume = off - -[Element Aux] -switch = off -volume = off - -[Element Video] -switch = off -volume = off - -[Element Mic/Line] -switch = off -volume = off - -[Element TV Tuner] -switch = off -volume = off - -[Element FM] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -.include analog-input.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf deleted file mode 100644 index 4be5722..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf +++ /dev/null @@ -1,61 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; For devices where a 'Line' element exists -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 90 - -[Element Capture] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Mic] -switch = off -volume = off - -[Element Line] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Aux] -switch = off -volume = off - -[Element Video] -switch = off -volume = off - -[Element Mic/Line] -switch = off -volume = off - -[Element TV Tuner] -switch = off -volume = off - -[Element FM] -switch = off -volume = off - -.include analog-input.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf deleted file mode 100644 index f7f3085..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf +++ /dev/null @@ -1,63 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; For devices where a 'Mic/Line' element exists -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 90 -name = analog-input - -[Element Capture] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Mic] -switch = off -volume = off - -[Element Line] -switch = off -volume = off - -[Element Aux] -switch = off -volume = off - -[Element Video] -switch = off -volume = off - -[Element Mic/Line] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element TV Tuner] -switch = off -volume = off - -[Element FM] -switch = off -volume = off - -.include analog-input.conf.common -.include analog-input-mic.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf deleted file mode 100644 index 2a36f2f..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf +++ /dev/null @@ -1,63 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; For devices where a 'Mic' element exists -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 100 -name = analog-input-microphone - -[Element Capture] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Mic] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Line] -switch = off -volume = off - -[Element Aux] -switch = off -volume = off - -[Element Video] -switch = off -volume = off - -[Element Mic/Line] -switch = off -volume = off - -[Element TV Tuner] -switch = off -volume = off - -[Element FM] -switch = off -volume = off - -.include analog-input.conf.common -.include analog-input-mic.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common deleted file mode 100644 index b35e7af..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common +++ /dev/null @@ -1,63 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Common element for all microphone inputs -; -; See analog-output.conf.common for an explanation on the directives - -;;; 'Mic Select' - -[Element Mic Select] -enumeration = select - -[Option Mic Select:Mic1] -name = input-microphone -priority = 20 - -[Option Mic Select:Mic2] -name = input-microphone -priority = 19 - -;;; Various Boosts - -[Element Mic Boost (+20dB)] -switch = select -volume = merge - -[Option Mic Boost (+20dB):on] -name = input-boost-on - -[Option Mic Boost (+20dB):off] -name = input-boost-off - -[Element Mic Boost] -switch = select -volume = merge - -[Option Mic Boost:on] -name = input-boost-on - -[Option Mic Boost:off] -name = input-boost-off - -[Element Front Mic Boost] -switch = select - -[Option Front Mic Boost:on] -name = input-boost-on - -[Option Front Mic Boost:off] -name = input-boost-off diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf deleted file mode 100644 index 8531ec7..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf +++ /dev/null @@ -1,62 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; For devices where a 'TV Tuner' element exists -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 70 -name = analog-input-video - -[Element Capture] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Mic] -switch = off -volume = off - -[Element Line] -switch = off -volume = off - -[Element Aux] -switch = off -volume = off - -[Element Video] -switch = off -volume = off - -[Element Mic/Line] -switch = off -volume = off - -[Element TV Tuner] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element FM] -switch = off -volume = off - -.include analog-input.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf deleted file mode 100644 index 74c76f0..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf +++ /dev/null @@ -1,61 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; For devices where a 'Video' element exists -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 70 - -[Element Capture] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Mic] -switch = off -volume = off - -[Element Line] -switch = off -volume = off - -[Element Aux] -switch = off -volume = off - -[Element Video] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Mic/Line] -switch = off -volume = off - -[Element TV Tuner] -switch = off -volume = off - -[Element FM] -switch = off -volume = off - -.include analog-input.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf deleted file mode 100644 index 5055f90..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf +++ /dev/null @@ -1,54 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; A fallback for devices that lack seperate Mic/Line/Aux/Video/TV -; Tuner/FM elements -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 100 - -[Element Capture] -required = volume -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Mic] -required-absent = any - -[Element Line] -required-absent = any - -[Element Aux] -required-absent = any - -[Element Video] -required-absent = any - -[Element Mic/Line] -required-absent = any - -[Element TV Tuner] -required-absent = any - -[Element FM] -required-absent = any - -.include analog-input.conf.common -.include analog-input-mic.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common deleted file mode 100644 index 951e11f..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common +++ /dev/null @@ -1,294 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Mixer path for PulseAudio's ALSA backend, common elements for all -; input paths. If multiple options by the same id are discovered they -; will be suffixed with a number to distuingish them, in the same -; order they appear here. -; -; Source selection should use the following names: -; -; input -- If we don't know the exact kind of input -; input-microphone -; input-microphone-internal -; input-microphone-external -; input-linein -; input-video -; input-radio -; input-docking-microphone -; input-docking-linein -; input-docking -; -; We explicitly don't want to wrap the following sources: -; -; CD -; Synth/MIDI -; Phone -; Mix -; Digital/SPDIF -; Master -; PC Speaker -; -; See analog-output.conf.common for an explanation on the directives - -;;; 'Input Source Select' - -[Element Input Source Select] -enumeration = select - -[Option Input Source Select:Input1] -name = input -priority = 10 - -[Option Input Source Select:Input2] -name = input -priority = 5 - -;;; 'Input Source' - -[Element Input Source] -enumeration = select - -[Option Input Source:Mic] -name = input-microphone -priority = 20 - -[Option Input Source:Microphone] -name = input-microphone -priority = 20 - -[Option Input Source:Front Mic] -name = input-microphone -priority = 19 - -[Option Input Source:Front Microphone] -name = input-microphone -priority = 19 - -[Option Input Source:Internal Mic] -name = input-microphone -priority = 19 - -[Option Input Source:Line] -name = input-linein -priority = 18 - -[Option Input Source:Line-In] -name = input-linein -priority = 18 - -[Option Input Source:Line In] -name = input-linein -priority = 18 - -[Option Input Source:Docking-Station] -name = input-docking -priority = 17 - -[Option Input Source:AUX IN] -name = input -priority = 10 - -;;; 'Capture Source' - -[Element Capture Source] -enumeration = select - -[Option Capture Source:TV Tuner] -name = input-video - -[Option Capture Source:FM] -name = input-radio - -[Option Capture Source:Mic/Line] -name = input - -[Option Capture Source:Line/Mic] -name = input - -[Option Capture Source:Mic] -name = input-microphone - -[Option Capture Source:Microphone] -name = input-microphone - -[Option Capture Source:Int Mic] -name = input-microphone-internal - -[Option Capture Source:Int DMic] -name = input-microphone-internal - -[Option Capture Source:Internal Mic] -name = input-microphone-internal - -[Option Capture Source:iMic] -name = input-microphone-internal - -[Option Capture Source:i-Mic] -name = input-microphone-internal - -[Option Capture Source:Internal Microphone] -name = input-microphone-internal - -[Option Capture Source:Front Mic] -name = input-microphone - -[Option Capture Source:Front Microphone] -name = input-microphone - -[Option Capture Source:Rear Mic] -name = input-microphone - -[Option Capture Source:Mic1] -name = input-microphone - -[Option Capture Source:Mic2] -name = input-microphone - -[Option Capture Source:D-Mic] -name = input-microphone - -[Option Capture Source:IntMic] -name = input-microphone-internal - -[Option Capture Source:ExtMic] -name = input-microphone-external - -[Option Capture Source:Ext Mic] -name = input-microphone-external - -[Option Capture Source:E-Mic] -name = input-microphone-external - -[Option Capture Source:e-Mic] -name = input-microphone-external - -[Option Capture Source:LineIn] -name = input-linein - -[Option Capture Source:Analog] -name = input - -[Option Capture Source:Line] -name = input-linein - -[Option Capture Source:Line-In] -name = input-linein - -[Option Capture Source:Line In] -name = input-linein - -[Option Capture Source:Video] -name = input-video - -[Option Capture Source:Aux] -name = input - -[Option Capture Source:Aux0] -name = input - -[Option Capture Source:Aux1] -name = input - -[Option Capture Source:Aux2] -name = input - -[Option Capture Source:Aux3] -name = input - -[Option Capture Source:AUX IN] -name = input - -[Option Capture Source:Aux In] -name = input - -[Option Capture Source:AOUT] -name = input - -[Option Capture Source:AUX] -name = input - -[Option Capture Source:Cam Mic] -name = input-microphone - -[Option Capture Source:Digital Mic] -name = input-microphone - -[Option Capture Source:Digital Mic 1] -name = input-microphone - -[Option Capture Source:Digital Mic 2] -name = input-microphone - -[Option Capture Source:Analog Inputs] -name = input - -[Option Capture Source:Unknown1] -name = input - -[Option Capture Source:Unknown2] -name = input - -[Option Capture Source:Docking-Station] -name = input-docking - -[Option Capture Source:Dock Mic] -name = input-docking-microphone - -;;; 'Mic Jack Mode' - -[Element Mic Jack Mode] -enumeration = select - -[Option Mic Jack Mode:Mic In] -name = input-microphone - -[Option Mic Jack Mode:Line In] -name = input-linein - -;;; 'Digital Input Source' - -[Element Digital Input Source] -enumeration = select - -[Option Digital Input Source:Analog Inputs] -name = input - -[Option Digital Input Source:Digital Mic 1] -name = input-microphone - -[Option Digital Input Source:Digital Mic 2] -name = input-microphone - -;;; Various Boosts - -[Element Capture Boost] -switch = select - -[Option Capture Boost:on] -name = input-boost-on - -[Option Capture Boost:off] -name = input-boost-off - -[Element Auto Gain Control] -switch = select - -[Option Auto Gain Control:on] -name = input-agc-on - -[Option Auto Gain Control:off] -name = input-agc-off diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf deleted file mode 100644 index f2fd31c..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf +++ /dev/null @@ -1,82 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Path for mixers that have a 'Headphone2' control -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 89 - -[Element Hardware Master] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master Mono] -switch = off -volume = off - -; This profile path is intended to control the second headphones, not -; the first headphones. But it should not hurt if we leave the -; headphone jack enabled nonetheless. -[Element Headphone] -switch = mute -volume = zero - -[Element Headphone2] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Speaker] -switch = off -volume = off - -[Element Front] -switch = off -volume = off - -[Element Rear] -switch = off -volume = off - -[Element Surround] -switch = off -volume = off - -[Element Side] -switch = off -volume = off - -[Element Center] -switch = off -volume = off - -[Element LFE] -switch = off -volume = off - -.include analog-output.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf deleted file mode 100644 index 2131cfe..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf +++ /dev/null @@ -1,82 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Path for mixers that have a 'Headphone' control -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 90 - -[Element Hardware Master] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master Mono] -switch = off -volume = off - -[Element Headphone] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -; This profile path is intended to control the first headphones, not -; the second headphones. But it should not hurt if we leave the second -; headphone jack enabled nonetheless. -[Element Headphone2] -switch = mute -volume = zero - -[Element Speaker] -switch = off -volume = off - -[Element Front] -switch = off -volume = off - -[Element Rear] -switch = off -volume = off - -[Element Surround] -switch = off -volume = off - -[Element Side] -switch = off -volume = off - -[Element Center] -switch = off -volume = off - -[Element LFE] -switch = off -volume = off - -.include analog-output.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf deleted file mode 100644 index 0a43e27..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf +++ /dev/null @@ -1,85 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Intended for usage in laptops that have a seperate LFE speaker -; connected to the Master mono connector -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 40 - -[Element Hardware Master] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master] -switch = mute -volume = merge -override-map.1 = all-no-lfe -override-map.2 = all-left,all-right - -[Element Master Mono] -required = any -switch = mute -volume = merge -override-map.1 = lfe -override-map.2 = lfe,lfe - -; This profile path is intended to control the speaker, not the -; headphones. But it should not hurt if we leave the headphone jack -; enabled nonetheless. -[Element Headphone] -switch = mute -volume = zero - -[Element Headphone2] -switch = mute -volume = zero - -[Element Speaker] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Front] -switch = off -volume = off - -[Element Rear] -switch = off -volume = off - -[Element Surround] -switch = off -volume = off - -[Element Side] -switch = off -volume = off - -[Element Center] -switch = off -volume = off - -[Element LFE] -switch = off -volume = off - -.include analog-output.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf deleted file mode 100644 index 542edc4..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf +++ /dev/null @@ -1,82 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Intended for usage on boards that have a seperate Mono output plug. -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 50 - -[Element Hardware Master] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master] -switch = off -volume = off - -[Element Master Mono] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -; This profile path is intended to control the speaker, not the -; headphones. But it should not hurt if we leave the headphone jack -; enabled nonetheless. -[Element Headphone] -switch = mute -volume = zero - -[Element Headphone2] -switch = mute -volume = zero - -[Element Speaker] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Front] -switch = off -volume = off - -[Element Rear] -switch = off -volume = off - -[Element Surround] -switch = off -volume = off - -[Element Side] -switch = off -volume = off - -[Element Center] -switch = off -volume = off - -[Element LFE] -switch = off -volume = off - -.include analog-output.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf deleted file mode 100644 index aea7853..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf +++ /dev/null @@ -1,94 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Path for mixers that have a 'Speaker' control -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 100 - -[Element Hardware Master] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master] -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master Mono] -switch = off -volume = off - -; This profile path is intended to control the speaker, not the -; headphones. But it should not hurt if we leave the headphone jack -; enabled nonetheless. -[Element Headphone] -switch = mute -volume = zero - -[Element Headphone2] -switch = mute -volume = zero - -[Element Speaker] -required = any -switch = mute -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Front] -switch = mute -volume = merge -override-map.1 = all-front -override-map.2 = front-left,front-right - -[Element Rear] -switch = mute -volume = merge -override-map.1 = all-rear -override-map.2 = rear-left,rear-right - -[Element Surround] -switch = mute -volume = merge -override-map.1 = all-rear -override-map.2 = rear-left,rear-right - -[Element Side] -switch = mute -volume = merge -override-map.1 = all-side -override-map.2 = side-left,side-right - -[Element Center] -switch = mute -volume = merge -override-map.1 = all-center -override-map.2 = all-center,all-center - -[Element LFE] -switch = mute -volume = merge -override-map.1 = lfe -override-map.2 = lfe,lfe - -.include analog-output.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf deleted file mode 100644 index fc30800..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf +++ /dev/null @@ -1,92 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Intended for the 'default' output. Note that a-o-speaker.conf has a -; higher priority than this -; -; See analog-output.conf.common for an explanation on the directives - -[General] -priority = 99 - -[Element Hardware Master] -switch = ignore -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master] -switch = ignore -volume = ignore -override-map.1 = all -override-map.2 = all-left,all-right - -[Element Master Mono] -switch = off -volume = off - -; This profile path is intended to control the default output, not the -; headphones. But it should not hurt if we leave the headphone jack -; enabled nonetheless. -[Element Headphone] -switch = ignore -volume = zero - -[Element Headphone2] -switch = ignore -volume = zero - -[Element Speaker] -switch = ignore -volume = off - -[Element Front] -switch = ignore -volume = merge -override-map.1 = all-front -override-map.2 = front-left,front-right - -[Element Rear] -switch = ignore -volume = merge -override-map.1 = all-rear -override-map.2 = rear-left,rear-right - -[Element Surround] -switch = ignore -volume = merge -override-map.1 = all-rear -override-map.2 = rear-left,rear-right - -[Element Side] -switch = ignore -volume = merge -override-map.1 = all-side -override-map.2 = side-left,side-right - -[Element Center] -switch = ignore -volume = merge -override-map.1 = all-center -override-map.2 = all-center,all-center - -[Element LFE] -switch = ignore -volume = merge -override-map.1 = lfe -override-map.2 = lfe,lfe - -.include analog-output.conf.common diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common deleted file mode 100644 index 3204846..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common +++ /dev/null @@ -1,128 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Common part of all paths - -; So here's generally how mixer paths are used by PA: PA goes through -; a mixer path file from top to bottom and checks if a mixer element -; described therein exists. If so it is added to the list of mixer -; elements PA will control, keeping the order it read them in. If a -; mixer element described here has set the required= or -; required-absent= directives a path might not be accepted as valid -; and is ignored in its entirety (see below). However usually if a -; element listed here is missing this one element is ignored but not -; the entire path. -; -; When a device shall be muted/unmuted *all* elements listed in a path -; file with "switch = mute" will be toggled. -; -; When a device shall change its volume, PA will got through the list -; of all elements with "volume = merge" and set the volume on the -; first element. If that element does not support dB volumes, this is -; where the story ends. If it does support dB volumes, PA divides the -; requested volume by the volume that was set on this element, and -; then go on to the next element with "volume = merge" and then set -; that there, and so on. That way the first volume element in the -; path will be the one that does the 'biggest' part of the overall -; volume adjustment, with the remaining elements usually being set to -; some value next to 0dB. This logic makes sure we get the full range -; over all volume sliders and a very high granularity of volumes -; already in hardware. -; -; All switches and enumerations set to "select" are exposed via the -; "port" functionality of sinks/sources. Basically every possible -; switch setting and every possible enumeration setting will be -; combined and made into a "port". So make sure you don't list too -; many switches/enums for exposing, because the number of ports might -; rise exponentially. -; -; Only one path can be selected at a time. All paths that are valid -; for an audio device will be exposed as "port" for the sink/source. - - -; [General] -; priority = ... # Priority for this path -; description = ... -; -; [Option ...:...] # For each option of an enumeration or switch element -; # that shall be exposed as a sink/source port. Needs to -; # be named after the Element, followed by a colon, followed -; # by the option name, resp. on/off if the element is a switch. -; name = ... # Logical name to use in the path identifier -; priority = ... # Priority if this is made into a device port -; -; [Element ...] # For each element that we shall control -; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available, -; # otherwise don't consider this path valid for the card -; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not -; # available, otherwise don't consider this path valid for the card -; -; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status, -; # always set it to off, always to on, or make it selectable as port. -; # If set to 'select' you need to define an Option section for on -; # and off -; volume = ignore | merge | off | zero # What to do with this volume: ignore it, merge it into the device -; # volume slider, always set it to the lowest value possible, or always -; # set it to 0 dB (for whatever that means) -; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable -; # via device ports. If set to 'select' you need to define an Option section -; # for each of the items you want to expose -; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be -; # set the direction of the PCM device is opened as. Generally this doesn't need to be set -; # unless you have a broken driver that has playback controls marked for capture or vice -; # versa -; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too? -; -; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel -; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels -; # Override maps should list for each element channel which high-level channels it controls via a -; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left", -; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of -; # channels in a mask - -[Element PCM] -switch = ignore -volume = merge -override-map.1 = all -override-map.2 = all-left,all-right - -[Element External Amplifier] -switch = select - -[Option External Amplifier:on] -name = output-amplifier-on -priority = 10 - -[Option External Amplifier:off] -name = output-amplifier-off -priority = 0 - -;;; 'Analog Output' - -[Element Analog Output] -enumeration = select - -[Option Analog Output:Speakers] -name = output-speaker -priority = 10 - -[Option Analog Output:Headphones] -name = output-headphones -priority = 9 - -[Option Analog Output:FP Headphones] -name = output-headphones -priority = 8 diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf deleted file mode 100644 index 9838138..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf +++ /dev/null @@ -1,144 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Default profile definitions for the ALSA backend of PulseAudio. This -; is used as fallback for all cards that have no special mapping -; assigned. (and should be good enough for the vast majority of -; cards). Use the udev property PULSE_PROFILE_SET to assign a -; different profile set than this one to a device. So what is this -; about? Simply, what we do here is map ALSA devices to how they are -; exposed in PA. We say which ALSA device string to use to open a -; device, which channel mapping to use then, and which mixer path to -; use. This is encoded in a 'mapping'. Multiple of these mappings can -; be bound together in a 'profile' which is then directly exposed in -; the UI as a card profile. Each mapping assigned to a profile will -; result in one sink/source to be created if the profile is selected -; for the card. - -; [General] -; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate -; # them by combining every input mapping with every output mapping. -; -; [Mapping id] -; device-strings = ... # ALSA device string. %f will be replaced by the card identifier. -; channel-map = ... # Channel mapping to use for this device -; description = ... -; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed. -; # If multiple are found to be working they will be available as device ports -; paths-output = ... -; element-input = ... # Instead of configuring a full mixer path simply configure a single -; # mixer element for volume/mute handling -; element-output = ... -; priority = ... -; direction = any | input | output # Only useful for? -; -; [Profile id] -; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be -; # defined in this file too -; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be -; # defined in this file too -; description = ... -; priority = ... # Numeric value to deduce priority for this profile -; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile -; # will be assumed as working without probing. Makes initialization -; # a bit faster but only works if the card is really known well. - -[General] -auto-profiles = yes - -[Mapping analog-mono] -device-strings = hw:0 -channel-map = mono -paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono -paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line -priority = 1 - -[Mapping analog-stereo] -device-strings = front:%f hw:0 -channel-map = left,right -paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono -paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line -priority = 10 - -[Mapping analog-surround-40] -device-strings = surround40:%f -channel-map = front-left,front-right,rear-left,rear-right -paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono -priority = 7 -direction = output - -[Mapping analog-surround-41] -device-strings = surround41:%f -channel-map = front-left,front-right,rear-left,rear-right,lfe -paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono -priority = 8 -direction = output - -[Mapping analog-surround-50] -device-strings = surround50:%f -channel-map = front-left,front-right,rear-left,rear-right,front-center -paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono -priority = 7 -direction = output - -[Mapping analog-surround-51] -device-strings = surround51:%f -channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe -paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono -priority = 8 -direction = output - -[Mapping analog-surround-71] -device-strings = surround71:%f -channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right -description = Analog Surround 7.1 -paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono -priority = 7 -direction = output - -[Mapping iec958-stereo] -device-strings = iec958:%f -channel-map = left,right -priority = 5 - -[Mapping iec958-surround-40] -device-strings = iec958:%f -channel-map = front-left,front-right,rear-left,rear-right -priority = 1 - -[Mapping iec958-ac3-surround-40] -device-strings = a52:%f -channel-map = front-left,front-right,rear-left,rear-right -priority = 2 -direction = output - -[Mapping iec958-ac3-surround-51] -device-strings = a52:%f -channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe -priority = 3 -direction = output - -[Mapping hdmi-stereo] -device-strings = hdmi:%f -channel-map = left,right -priority = 4 -direction = output - -; An example for defining multiple-sink profiles -#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] -#description = Foobar -#output-mappings = analog-stereo iec958-stereo -#input-mappings = analog-stereo diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf deleted file mode 100644 index 2b83530..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf +++ /dev/null @@ -1,91 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Native Instruments Audio 4 DJ -; -; This card has two stereo pairs of input and two stereo pairs of -; output, named channels A and B. Channel B has an additional -; Headphone connector. -; -; We knowingly only define a subset of the theoretically possible -; mapping combinations as profiles here. -; -; See default.conf for an explanation on the directives used here. - -[General] -auto-profiles = no - -[Mapping analog-stereo-a] -description = Analog Stereo Channel A -device-strings = hw:%f,0,0 -channel-map = left,right - -[Mapping analog-stereo-b-output] -description = Analog Stereo Channel B (Headphones) -device-strings = hw:%f,0,1 -channel-map = left,right -direction = output - -[Mapping analog-stereo-b-input] -description = Analog Stereo Channel B -device-strings = hw:%f,0,1 -channel-map = left,right -direction = input - -[Profile output:analog-stereo-all+input:analog-stereo-all] -description = Analog Stereo Duplex Channels A, B (Headphones) -output-mappings = analog-stereo-a analog-stereo-b-output -input-mappings = analog-stereo-a analog-stereo-b-input -priority = 100 -skip-probe = yes - -[Profile output:analog-stereo-a+input:analog-stereo-a] -description = Analog Stereo Duplex Channel A -output-mappings = analog-stereo-a -input-mappings = analog-stereo-a -priority = 40 -skip-probe = yes - -[Profile output:analog-stereo-b+input:analog-stereo-b] -description = Analog Stereo Duplex Channel B (Headphones) -output-mappings = analog-stereo-b-output -input-mappings = analog-stereo-b-input -priority = 50 -skip-probe = yes - -[Profile output:analog-stereo-a] -description = Analog Stereo Output Channel A -output-mappings = analog-stereo-a -priority = 5 -skip-probe = yes - -[Profile output:analog-stereo-b] -description = Analog Stereo Output Channel B (Headphones) -output-mappings = analog-stereo-b-output -priority = 6 -skip-probe = yes - -[Profile input:analog-stereo-a] -description = Analog Stereo Input Channel A -input-mappings = analog-stereo-a -priority = 2 -skip-probe = yes - -[Profile input:analog-stereo-b] -description = Analog Stereo Input Channel B -input-mappings = analog-stereo-b-input -priority = 1 -skip-probe = yes diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf b/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf deleted file mode 100644 index 3fe3cc5..0000000 --- a/mmfw-sysconf-cleansdk-e4x12/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf +++ /dev/null @@ -1,162 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -; Native Instruments Audio 8 DJ -; -; This card has four stereo pairs of input and four stereo pairs of -; output, named channels A to D. Channel C has an additional Mic/Line -; connector, channel D an additional Headphone connector. -; -; We knowingly only define a subset of the theoretically possible -; mapping combinations as profiles here. -; -; See default.conf for an explanation on the directives used here. - -[General] -auto-profiles = no - -[Mapping analog-stereo-a] -description = Analog Stereo Channel A -device-strings = hw:%f,0,0 -channel-map = left,right - -[Mapping analog-stereo-b] -description = Analog Stereo Channel B -device-strings = hw:%f,0,1 -channel-map = left,right - -# Since we want to set a different description for channel C's/D's input -# and output we define two seperate mappings for them -[Mapping analog-stereo-c-output] -description = Analog Stereo Channel C -device-strings = hw:%f,0,2 -channel-map = left,right -direction = output - -[Mapping analog-stereo-c-input] -description = Analog Stereo Channel C (Line/Mic) -device-strings = hw:%f,0,2 -channel-map = left,right -direction = input - -[Mapping analog-stereo-d-output] -description = Analog Stereo Channel D (Headphones) -device-strings = hw:%f,0,3 -channel-map = left,right -direction = output - -[Mapping analog-stereo-d-input] -description = Analog Stereo Channel D -device-strings = hw:%f,0,3 -channel-map = left,right -direction = input - -[Profile output:analog-stereo-all+input:analog-stereo-all] -description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones) -output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output -input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input -priority = 100 -skip-probe = yes - -[Profile output:analog-stereo-d+input:analog-stereo-c] -description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input -output-mappings = analog-stereo-d-output -input-mappings = analog-stereo-c-input -priority = 90 -skip-probe = yes - -[Profile output:analog-stereo-c-d+input:analog-stereo-c-d] -description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic) -output-mappings = analog-stereo-c-output analog-stereo-d-output -input-mappings = analog-stereo-c-input analog-stereo-d-input -priority = 80 -skip-probe = yes - -[Profile output:analog-stereo-a+input:analog-stereo-a] -description = Analog Stereo Duplex Channel A -output-mappings = analog-stereo-a -input-mappings = analog-stereo-a -priority = 50 -skip-probe = yes - -[Profile output:analog-stereo-b+input:analog-stereo-b] -description = Analog Stereo Duplex Channel B -output-mappings = analog-stereo-b -input-mappings = analog-stereo-b -priority = 40 -skip-probe = yes - -[Profile output:analog-stereo-c+input:analog-stereo-c] -description = Analog Stereo Duplex Channel C (Line/Mic) -output-mappings = analog-stereo-c-output -input-mappings = analog-stereo-c-input -priority = 60 -skip-probe = yes - -[Profile output:analog-stereo-d+input:analog-stereo-d] -description = Analog Stereo Duplex Channel D (Headphones) -output-mappings = analog-stereo-d-output -input-mappings = analog-stereo-d-input -priority = 70 -skip-probe = yes - -[Profile output:analog-stereo-a] -description = Analog Stereo Output Channel A -output-mappings = analog-stereo-a -priority = 6 -skip-probe = yes - -[Profile output:analog-stereo-b] -description = Analog Stereo Output Channel B -output-mappings = analog-stereo-b -priority = 5 -skip-probe = yes - -[Profile output:analog-stereo-c] -description = Analog Stereo Output Channel C -output-mappings = analog-stereo-c-output -priority = 7 -skip-probe = yes - -[Profile output:analog-stereo-d] -description = Analog Stereo Output Channel D (Headphones) -output-mappings = analog-stereo-d-output -priority = 8 -skip-probe = yes - -[Profile input:analog-stereo-a] -description = Analog Stereo Input Channel A -input-mappings = analog-stereo-a -priority = 2 -skip-probe = yes - -[Profile input:analog-stereo-b] -description = Analog Stereo Input Channel B -input-mappings = analog-stereo-b -priority = 1 -skip-probe = yes - -[Profile input:analog-stereo-c] -description = Analog Stereo Input Channel C (Line/Mic) -input-mappings = analog-stereo-c-input -priority = 4 -skip-probe = yes - -[Profile input:analog-stereo-d] -description = Analog Stereo Input Channel D -input-mappings = analog-stereo-d-input -priority = 3 -skip-probe = yes diff --git a/mmfw-sysconf-cleansdk-target/etc/asound.conf b/mmfw-sysconf-cleansdk-target/etc/asound.conf deleted file mode 100644 index f38749a..0000000 --- a/mmfw-sysconf-cleansdk-target/etc/asound.conf +++ /dev/null @@ -1,23 +0,0 @@ -# default sound configuration for c210 - -pcm. !default { - type hw - card 0 -} - -ctl. !default { - type hw - card 0 -} - -pcm. AIF2{ - type hw - card 0 - device 1 -} - -pcm. AIF3{ - type hw - card 0 - device 3 -} diff --git a/mmfw-sysconf-cleansdk-target/etc/pulse/default.pa b/mmfw-sysconf-cleansdk-target/etc/pulse/default.pa deleted file mode 100644 index e0737e8..0000000 --- a/mmfw-sysconf-cleansdk-target/etc/pulse/default.pa +++ /dev/null @@ -1,137 +0,0 @@ -#!/usr/bin/pulseaudio -nF -# -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify it -# under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -# This startup script is used only if PulseAudio is started per-user -# (i.e. not in system mode) - -.nofail - -### Load something into the sample cache -#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav -#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav -#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav -#load-sample-lazy pulse-access /usr/share/sounds/generic.wav - -.fail - -### Automatically restore the volume of streams and devices -load-module module-device-restore -load-module module-stream-restore -load-module module-card-restore - -### Automatically augment property information from .desktop files -### stored in /usr/share/application -load-module module-augment-properties - -### Load audio drivers statically (it's probably better to not load -### these drivers manually, but instead use module-hal-detect -- -### see below -- for doing this automatically) -#load-module module-alsa-sink -#load-module module-alsa-source device=hw:1,0 -#load-module module-oss device="/dev/dsp" sink_name=output source_name=input -#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input -#load-module module-null-sink -#load-module module-pipe-sink - -### Automatically load driver modules depending on the hardware available -.ifexists module-udev-detect.so -#load-module module-udev-detect -.else -### Alternatively use the static hardware detection module (for systems that -### lack udev support) -#load-module module-detect -.endif - -### Automatically load driver modules for Bluetooth hardware -.ifexists module-bluetooth-discover.so -load-module module-bluetooth-discover -.endif - -### Load several protocols -.ifexists module-esound-protocol-unix.so -load-module module-esound-protocol-unix -.endif -load-module module-native-protocol-unix - -### Network access (may be configured with paprefs, so leave this commented -### here if you plan to use paprefs) -#load-module module-esound-protocol-tcp -#load-module module-native-protocol-tcp -#load-module module-zeroconf-publish - -### Load the RTP reciever module (also configured via paprefs, see above) -#load-module module-rtp-recv - -### Load the RTP sender module (also configured via paprefs, see above) -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink" -#load-module module-rtp-send source=rtp.monitor - -### Load additional modules from GConf settings. This can be configured with the paprefs tool. -### Please keep in mind that the modules configured by paprefs might conflict with manually -### loaded modules. -.ifexists module-gconf.so -.nofail -load-module module-gconf -.fail -.endif - -### Automatically restore the default sink/source when changed by the user during runtime -load-module module-default-device-restore - -### Automatically move streams to the default sink if the sink they are -### connected to dies, similar for sources -load-module module-rescue-streams - -### Make sure we always have a sink around, even if it is a null sink. -load-module module-always-sink - -### Honour intended role device property -load-module module-intended-roles - -### Automatically suspend sinks/sources that become idle for too long -load-module module-suspend-on-idle - -### If autoexit on idle is enabled we want to make sure we only quit -### when no local session needs us anymore. -load-module module-console-kit - -### Enable positioned event sounds -load-module module-position-event-sounds - -### Cork music streams when a phone stream is active -load-module module-cork-music-on-phone - -# X11 modules should not be started from default.pa so that one daemon -# can be shared by multiple sessions. - -### Load X11 bell module -#load-module module-x11-bell sample=bell-windowing-system - -### Register ourselves in the X11 session manager -#load-module module-x11-xsmp - -### Publish connection data in the X11 root window -#.ifexists module-x11-publish.so -#.nofail -#load-module module-x11-publish -#.fail -#.endif - -### Make some devices default -#set-default-sink output -#set-default-source input diff --git a/mmfw-sysconf-cleansdk-target/usr/etc/gst-openmax.conf b/mmfw-sysconf-cleansdk-target/usr/etc/gst-openmax.conf deleted file mode 100644 index ed6f3db..0000000 --- a/mmfw-sysconf-cleansdk-target/usr/etc/gst-openmax.conf +++ /dev/null @@ -1,55 +0,0 @@ -omx_mpeg4dec, - type=GstOmxMpeg4Dec, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.MPEG4.Decoder, - sink="video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-divx, divxversion=(int)[4,5], width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-xvid, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-3ivx, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_h264dec, - type=GstOmxH264Dec, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.AVC.Decoder, - sink="video/x-h264, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_h263dec, - type=GstOmxH263Dec, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.H263.Decoder, - sink="video/x-h263, variant=(string)itu, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_wmvdec, - type=GstOmxWmvDec, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.WMV.Decoder, - sink="video/x-wmv, wmvversion=(int)3, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_mpeg4enc, - type=GstOmxMpeg4Enc, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.MPEG4.Encoder, - sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_h264enc, - type=GstOmxH264Enc, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.AVC.Encoder, - sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-h264, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; - -omx_h263enc, - type=GstOmxH263Enc, - library-name=libSEC_OMX_Core.so.0, - component-name=OMX.SEC.H263.Encoder, - sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - src="video/x-h263, variant=(string)itu, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];", - rank=256; diff --git a/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder.ini b/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder.ini deleted file mode 100644 index 3f988c7..0000000 --- a/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder.ini +++ /dev/null @@ -1,104 +0,0 @@ -; < Camera/Camcorder Configure Main INI file > -; -; - aquila_FUJITSU_M5MOLS -; -; - Header List - -; 1. General -; 2. VideoInput -; 3. AudioInput -; 4. VideoOutput -; 5. Capture -; 6. Record -; 7. VideoEncoder -; 8. AudioEncoder -; 9. ImageEncoder -; 10. Mux -; -; - Note - -; If you want to add a new header, -; add a new enum value to "enum ConfigureCategoryMain" -; and new default table for it in mm_camcorder_configure.c/.h -; - -[General] -SyncStateChange = 1 -;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE -;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE -ModelName = GT-TIZEN -;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE - -[VideoInput] -UseConfCtrl = 1 -ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini -ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini -VideosrcElement = camerasrc | 2,0 | do-timestamp,1 | num-alloc-buf,7 -UseVideoscale = 0 -VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1 -UseZeroCopyFormat = 1 -DeviceCount = 2 - -[AudioInput] -AudiosrcElement = avsysaudiosrc | 3,0 | do-timestamp,1 | slave-method,3 | latency,0 -AudiomodemsrcElement = audiotestsrc | 2,0 | do-timestamp,1 | slave-method,3 - -[VideoOutput] -; DisplayDevice -;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT -DisplayDevice = 0 || 0 -; Videosink -;;; 0: X surface, 1: Evas surface, 2: GL surface, 3: NULL surface -Videosink = 0,1,3 || 0 -VideosinkElementX = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0 -VideosinkElementEvas = evasimagesink | 4,0 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0 -VideosinkElementNull = fakesink | 3,0 | qos,0 | sync,0 | enable-last-buffer,0 -UseVideoscale = 0 -VideoscaleElement = fimcconvert | 1,0 | rotang,90 - -[VideoEncoder] -H263 = omx_h263enc | 0,0 -H264 = omx_h264enc | 0,0 -MPEG4 = omx_mpeg4enc | 0,0 - -[AudioEncoder] -AMR = amrnbenc | 0,0 -AAC = ffenc_aac | 0,0 -WAVE = wavenc | 0,0 - -[ImageEncoder] -JPEG = secjpeg_enc | 0,0 -;PNG = pngenc | 0,0 - -[Capture] -UseEncodebin = 0 -UseCaptureMode = 0 -VideoscaleElement = videoscale | 1,0 | method,1 - -[Record] -UseAudioEncoderQueue = 1 -UseVideoEncoderQueue = 1 -VideoProfile = 0 -VideoAutoAudioConvert = 1 -VideoAutoAudioResample = 0 -VideoAutoColorSpace = 0 -AudioProfile = 1 -AudioAutoAudioConvert = 1 -AudioAutoAudioResample = 0 -AudioAutoColorSpace = 0 -ImageProfile = 2 -ImageAutoAudioConvert = 0 -ImageAutoAudioResample = 0 -ImageAutoColorSpace = 1 -RecordsinkElement = filesink | 1,0 | async,0 -UseNoiseSuppressor = 0 -DropVideoFrame = 0 -PassFirstVideoFrame = 0 - -[Mux] -3GP = ffmux_3gp | 0,0 -AMR = ffmux_amr | 0,0 -MP4 = ffmux_mp4 | 0,0 -AVI = avimux | 0,0 -MATROSKA = matroskamux | 0,0 -WAV = wavenc | 0,0 -AAC = ffmux_adts | 0,0 - diff --git a/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder_dev_video_pri.ini b/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder_dev_video_pri.ini deleted file mode 100644 index bac2ea9..0000000 --- a/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder_dev_video_pri.ini +++ /dev/null @@ -1,177 +0,0 @@ -; < Camera/Camcorder Configure Control INI file > -; -; - aquila_FUJITSU_M5MOLS -; -; - Header List - -; 1. Camera -; 2. Strobe -; 3. Effect -; 4. Photograph -; 5. Capture -; 6. Detect -; -; - Note - -; If you want to add a new header, -; add a new enum value to "enum ConfigureCategoryControl" -; and new default table for it in mm_camcorder_configure.c/.h -; - -[Camera] -; Input index - real setting value -;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA -; Input index - MSL value(convert array index) -;;; -1:NONE, 0:CAMERA0, 1:CAMERA1 -InputIndex = 0,-255 || 0 -DeviceName = m5mols_c210 -PreviewResolution = 176,144 | 320,240 | 640,480 | 720,480 | 800,480 | 1280,720 | 1920,1080 || 640,480 -CaptureResolution = 640,480 | 1280,720 | 1920,1080 | 2048,1536 | 3264,1960 | 3264,2448 || 3264,2448 -FPS = 0,8,15,24,25,30,60,120 || 30 -; PictureForamt - MSL value -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED -PictureFormat = 0,4,7 || 0 -Overlay = 0,1 || 1 -; Recommend display rotation -;;; 0:NONE, 1:90, 2:180, 3:270 -RecommendDisplayRotation = 3 -; Recommend preview format for capture -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY -RecommendPreviewFormatCapture = 0 -; Recommend preview format for record -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY -RecommendPreviewFormatRecord = 0 -; Recommend preview resolution -;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9) -RecommendPreviewResolution = 640,480 | 800,480 || 640,480 -; Camera facing direction -;;; 0:REAR, 1:FRONT -FacingDirection = 0 - - -[Strobe] -;StrobeControl - Not support -;StrobeCapabilities - Not support -; Strobe mode - real setting value -;;; 0:BASE, 1:OFF, 2:AUTO, 3:ON, 4:TORCH, 5:MAX -; Strobe mode - MSL value(convert array index) -;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT -StrobeMode = 1,-255,-255,-255,-255,-255,-255,-255 || 1 -;StrobeStatus - Not support -;StrobeEV - Not support - - -[Effect] -Brightness = 0,8 || 4 -;Contrast = 1,7 || 4 -Saturation = 0,4 || 2 -Sharpness = 0,4 || 2 - -; White balance - real setting value -;;; 0:BASE, 1:AUTO, 2:SUNNY, 3:CLOUDY, 4:TUNGSTEN, 5:FLUORESCENT -; White balance - MSL value(convert array index) -;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM -WhiteBalance = -255,1,2,3,5,4,-255,-255,-255,-255 || 1 - -; Color tone - real setting value -;;; 1:NONE, 2:BNW, 3:SEPIA, 4:AQUA, 6:NEGATIVE -; Color tone - MSL value(convert array index) -;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED, -;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED, -;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW -ColorTone = 1,-255,3,6,-255,-255,4,-255,-255,2,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0 - -; Flip - real setting value -;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL -; Flip - MSL value(convert array index) -;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE -;Flip = 2,1,0 || 0 - -; Wide Dynamic Range - real setting value -;;; 0:OFF, 1:ON -; Wide Dynamic Range - MSL value(convert array index) -;;; 0:OFF, 1:ON, 2:AUTO -WDR = 0,1,-255 || 0 - - -[Photograph] -;LensInit = 0,1 || 0 -DigitalZoom = 0,30 || 0 -OpticalZoom = 0,0 || 0 - -; Focus mode - real setting value -;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS -; Focus mode - MSL value(convert array index) -;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS -FocusMode = -255,-255,0,-255,3,-255 || 3 - -; Auto focus type - real setting value -;;; 0:NORMAL, 1:MACRO, 2:FULL -; Auto focus - MSL value(convert array index) -;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL -AFType = -255,0,1,-255 || 0 - -; Auto exposure type - real setting value -;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX -; Auto exposure mode - MSL value(convert array index) -;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2 -AEType = -255,1,2,-255,-255,3,-255,-255,-255 || 1 - -;ExposureValue - Not support -;FNumber - Not support -;ShutterSpeed - Not support - -; ISO - real setting value -;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600(Not Supported), 7:SPORTS(Not Supported), 8:NIGHT(Not Supported), 9:MOVIE(Not Supported) -; ISO - MSL value(convert array index) -;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200 -ISO = 0,1,2,3,4,5,-255,-255 || 0 - -; Program mode - real setting value -;;; 0:BASE, 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN, -;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT -; Program mode - MSL value(convert array index) -;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE, -;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT -ProgramMode = 1,2,5,6,7,-255,9,10,11,3,12,13,-255,14,4 || 1 - -; Anti-handshake - real setting value -;;; N/A -; Anti-handshake - MSL value(convert array index) -;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON -AntiHandshake = 0,-255,-255,-255 || 0 - -; Video-stabilization - real setting value -;;; 0:OFF, 1:ON -; Video-stabilization - MSL value(convert array index) -;;; 0:OFF, 1:ON -VideoStabilization = 0 || 0 - -; Face zoom mode -;;; 0:OFF, 1:ON -FaceZoomMode = 0 || 0 -; Face zoom level -FaceZoomLevel = 0,0 || 0 - - -[Capture] -; Output mode -;;; No need to convert -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED -OutputMode = 0,4,7,13 || 13 -JpegQuality = 0,100 || 50 -MultishotNumber = 1,255 || 1 -SensorEncodedCapture = 1 -; Support HDR -;;; 0: OFF, 1: ON, 2: ON and Original -SupportHDR = 0,-255,-255 || 0 - - -[Detect] -; Detect mode -;;; No need to convert -;;; 0:OFF, 1:ON -DetectMode = 0 || 0 -;DetectNumber - Not support -;DetectFocusSelect - Not support -;DetectSelectNumber - Not support -;DetectStatus - Not support - diff --git a/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder_dev_video_sec.ini b/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder_dev_video_sec.ini deleted file mode 100644 index e82c20d..0000000 --- a/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_camcorder_dev_video_sec.ini +++ /dev/null @@ -1,170 +0,0 @@ -; < Camera/Camcorder Configure Control INI file > -; -; - aquila_FUJITSU_M5MOLS - VGA camera -; -; - Header List - -; 1. Camera -; 2. Strobe -; 3. Effect -; 4. Photograph -; 5. Capture -; 6. Detect -; -; - Note - -; If you want to add a new header, -; add a new enum value to "enum ConfigureCategoryControl" -; and new default table for it in mm_camcorder_configure.c/.h -; - -[Camera] -; Input index - real setting value -;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA -; Input index - MSL value(convert array index) -;;; -1:NONE, 0:CAMERA0, 1:CAMERA1 -InputIndex = -255,1 || 1 -DeviceName = m4mo_VGA_c210 -PreviewResolution = 176,144 | 320,240 | 352,288 | 640,480 || 640,480 -CaptureResolution = 176,144 | 320,240 | 352,288 | 640,480 || 640,480 -FPS = 0,8,15,25,30 || 30 -; PictureForamt - MSL value -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED -PictureFormat = 0,4,7 || 0 -Overlay = 0,1 || 1 -; Recommend display rotation -;;; 0:NONE, 1:90, 2:180, 3:270 -RecommendDisplayRotation = 3 -; Recommend preview format for capture -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY -RecommendPreviewFormatCapture = 0 -; Recommend preview format for record -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY -RecommendPreviewFormatRecord = 0 -; Recommend preview resolution -;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9) -RecommendPreviewResolution = 640,480 | 352,288 || 640,480 -; Camera facing direction -;;; 0:REAR, 1:FRONT -FacingDirection = 1 - - -[Strobe] -;StrobeControl - Not support -;StrobeCapabilities - Not support -; Strobe mode - real setting value -;;; N/A -; Strobe mode - MSL value(convert array index) -;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT -StrobeMode = 0,-255,-255,-255,-255,-255,-255,-255 || 0 -;StrobeStatus - Not support -;StrobeEV - Not support - - -[Effect] -Brightness = -4,4 || 0 -;Contrast - Not support -;Saturation - Not support -;Sharpness - Not support - -; White balance - real setting value -;;; N/A -; White balance - MSL value(convert array index) -;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM -WhiteBalance = -255,0,-255,-255,-255,-255,-255,-255,-255,-255 || 0 - -; Color tone - real setting value -;;; N/A -; Color tone - MSL value(convert array index) -;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED, -;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED, -;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW -ColorTone = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0 - -; Wide Dynamic Range - real setting value -;;; N/A -; Wide Dynamic Range - MSL value(convert array index) -;;; 0:OFF, 1:ON, 2:AUTO -WDR = 0,-255,-255 || 0 - - -[Photograph] -;LensInit - Not support -DigitalZoom = 0,0 || 0 -OpticalZoom = 0,0 || 0 - -; Focus mode - real setting value -;;; N/A -; Focus mode - MSL value(convert array index) -;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS -FocusMode = -255,0,-255,-255,-255,-255 || 0 - -; Auto focus type - real setting value -;;; N/A -; Auto focus - MSL value(convert array index) -;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL -AFType = 0,-255,-255,-255 || 0 - -; Auto exposure type - real setting value -;;; N/A -; Auto exposure mode - MSL value(convert array index) -;;; 0:OFF, 1:ALL, 2:CENTER1, 3:CENTER2, 4:CENTER3, 5:SPOT1, 6:SPOT2, 7:CUSTOM1, 8:CUSTOM2 -AEType = -255,0,-255,-255,-255,-255,-255,-255,-255 || 0 - -;ExposureValue - Not support -;FNumber - Not support -;ShutterSpeed - Not support - -; ISO - real setting value -;;; N/A -; ISO - MSL value(convert array index) -;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200 -ISO = 0,-255,-255,-255,-255,-255,-255,-255 || 0 - -; Program mode - real setting value -;;; N/A -; Program mode - MSL value(convert array index) -;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE, -;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT -ProgramMode = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0 - -; Anti-handshake - real setting value -;;; N/A -; Anti-handshake - MSL value(convert array index) -;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON -AntiHandshake = 0,-255,-255,-255 || 0 - -; Video-stabilization - real setting value -;;; 0:OFF, 1:ON -; Video-stabilization - MSL value(convert array index) -;;; 0:OFF, 1:ON -VideoStabilization = 0 || 0 - -; Face zoom mode -;;; 0:OFF, 1:ON -FaceZoomMode = 0 || 0 -; Face zoom level -FaceZoomLevel = 0,0 || 0 - - -[Capture] -; Output mode -;;; No need to convert -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED -OutputMode = 0,4,7,13 || 13 -JpegQuality = 0,100 || 50 -MultishotNumber = 1,255 || 1 -SensorEncodedCapture = 0 -; Support HDR -;;; 0: OFF, 1: ON, 2: ON and Original -SupportHDR = 0,-255,-255 || 0 - - -[Detect] -; Detect mode -;;; No need to convert -;;; 0:OFF, 1:ON -DetectMode = 0 || 0 -;DetectNumber - Not support -;DetectFocusSelect - Not support -;DetectSelectNumber - Not support -;DetectStatus - Not support - diff --git a/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_player.ini b/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_player.ini deleted file mode 100644 index a151618..0000000 --- a/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_player.ini +++ /dev/null @@ -1,97 +0,0 @@ -[general] - -; if disabled typefind element will used directely -use decodebin = no ; async state change problem exist - -use sink handler = yes - -disable segtrap = yes ; same effect with --gst-disable-segtrap - -; set default videosink element according to video surface type(X, EVAS, NULL) -videosink element x = xvimagesink -videosink element evas = evaspixmapsink -videosink element fake = fakesink - -video converter element = ffmpegcolorspace - -audiosink element = avsysaudiosink - -drmsrc element = filesrc - -; if yes. gstreamer will not update registry -skip rescan = yes -delay before repeat = 50 ; msec - -; comma separated list of tocken which elemnts has it in it's name will not be used -element exclude keyword = - -async start = yes - -multiple codec supported = yes - -; parameters for initializing gstreamer -gstparam1 = -gstparam2 = -gstparam3 = -gstparam4 = -gstparam5 = - -; generating dot file representing pipeline state -generate dot = no - -; parameter for clock provide in audiosink -provide clock = yes - -; allowed timeout for changing pipeline state -live state change timeout = 30 ; sec -localplayback state change timeout = 10 ; sec - -; delay in msec for sending EOS -eos delay = 150 ; msec - - -[http streaming] - -httpsrc element = souphttpsrc - -; if set, use file or not use memory for buffering -http file buffer path = /opt/usr/media - -http buffering limit = 99.0 ; percent - -http max size bytes = 1048576 ; bytes - -http buffering time = 1.2 - -http timeout = 30 ; sec - - -[rtsp streaming] - -rtspsrc element = rtspsrc - -rtsp buffering time = 5000; msec - -rtsp rebuffering time = 15000; msec - -rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging - -rtsp error concealment = yes - - -[hw accelation] -use video hw accel = no - - -[priority] - -use priority setting = no - -demux = 95 - -videosink = 96 - -audiosink = 97 - -ringbuffer = 98 - diff --git a/mmfw-sysconf-simulator.manifest b/mmfw-sysconf-simulator.manifest old mode 100755 new mode 100644 diff --git a/mmfw-sysconf-simulator/etc/pulse/default.pa b/mmfw-sysconf-simulator/etc/pulse/default.pa old mode 100644 new mode 100755 diff --git a/mmfw-sysconf-simulator/etc/pulse/system.pa b/mmfw-sysconf-simulator/etc/pulse/system.pa old mode 100644 new mode 100755 diff --git a/mmfw-sysconf-cleansdk-target.manifest b/mmfw-sysconf-target-u3.manifest old mode 100755 new mode 100644 similarity index 100% rename from mmfw-sysconf-cleansdk-target.manifest rename to mmfw-sysconf-target-u3.manifest diff --git a/mmfw-sysconf-cleansdk-e4x12/etc/asound.conf b/mmfw-sysconf-target-u3/etc/asound.conf similarity index 97% rename from mmfw-sysconf-cleansdk-e4x12/etc/asound.conf rename to mmfw-sysconf-target-u3/etc/asound.conf index 6181b18..f717a3e 100644 --- a/mmfw-sysconf-cleansdk-e4x12/etc/asound.conf +++ b/mmfw-sysconf-target-u3/etc/asound.conf @@ -3,7 +3,7 @@ pcm. !default { playback.pcm { type hw card 0 - device 3 + device 0 } capture.pcm { type hw diff --git a/mmfw-sysconf-cleansdk-target/etc/pulse/client.conf b/mmfw-sysconf-target-u3/etc/pulse/client.conf similarity index 87% rename from mmfw-sysconf-cleansdk-target/etc/pulse/client.conf rename to mmfw-sysconf-target-u3/etc/pulse/client.conf index 1ce9863..b78d121 100644 --- a/mmfw-sysconf-cleansdk-target/etc/pulse/client.conf +++ b/mmfw-sysconf-target-u3/etc/pulse/client.conf @@ -16,12 +16,13 @@ # USA. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for -## more information. Default values a commented out. Use either ; or # for +## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = +; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio @@ -31,3 +32,6 @@ ; enable-shm = yes shm-size-bytes = 4194304 # setting this 0 will use the system-default, usually 64 MiB + +; auto-connect-localhost = no +; auto-connect-display = no diff --git a/mmfw-sysconf-cleansdk-target/etc/pulse/daemon.conf b/mmfw-sysconf-target-u3/etc/pulse/daemon.conf similarity index 87% rename from mmfw-sysconf-cleansdk-target/etc/pulse/daemon.conf rename to mmfw-sysconf-target-u3/etc/pulse/daemon.conf index 28b95c1..65a446d 100644 --- a/mmfw-sysconf-cleansdk-target/etc/pulse/daemon.conf +++ b/mmfw-sysconf-target-u3/etc/pulse/daemon.conf @@ -16,15 +16,16 @@ # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for -## more information. Default values a commented out. Use either ; or # for +## more information. Default values are commented out. Use either ; or # for ## commenting. -; daemonize = no +daemonize = yes ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes -; system-instance = no +system-instance = yes +; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no @@ -42,10 +43,10 @@ realtime-priority = 5 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes -; default-script-file = +; default-script-file = /etc/pulse/default.pa -log-target = dlog-color -; log-level = notice +log-target = dlog +log-level = debug ; log-meta = no ; log-time = no ; log-backtrace = 0 @@ -54,7 +55,7 @@ resample-method = ffmpeg ; enable-remixing = yes ; enable-lfe-remixing = no -; flat-volumes = yes +flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 @@ -74,6 +75,7 @@ resample-method = ffmpeg ; default-sample-format = s16le ; default-sample-rate = 44100 +alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right diff --git a/mmfw-sysconf-cleansdk-e4x12/etc/pulse/default.pa b/mmfw-sysconf-target-u3/etc/pulse/default.pa old mode 100644 new mode 100755 similarity index 69% rename from mmfw-sysconf-cleansdk-e4x12/etc/pulse/default.pa rename to mmfw-sysconf-target-u3/etc/pulse/default.pa index e0737e8..cac0b9e --- a/mmfw-sysconf-cleansdk-e4x12/etc/pulse/default.pa +++ b/mmfw-sysconf-target-u3/etc/pulse/default.pa @@ -38,26 +38,34 @@ load-module module-card-restore ### stored in /usr/share/application load-module module-augment-properties -### Load audio drivers statically (it's probably better to not load -### these drivers manually, but instead use module-hal-detect -- -### see below -- for doing this automatically) +### Load audio drivers statically +### (it's probably better to not load these drivers manually, but instead +### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 -#load-module module-oss device="/dev/dsp" sink_name=output source_name=input -#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so -#load-module module-udev-detect +load-module module-udev-detect .else -### Alternatively use the static hardware detection module (for systems that -### lack udev support) -#load-module module-detect +### Use the static hardware detection module (for systems that lack udev support) +load-module module-detect +.endif + +### Automatically connect sink and source if JACK server is present +.ifexists module-jackdbus-detect.so +.nofail +load-module module-jackdbus-detect channels=2 +.fail .endif ### Automatically load driver modules for Bluetooth hardware +.ifexists module-bluetooth-policy.so +load-module module-bluetooth-policy +.endif + .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif @@ -72,13 +80,12 @@ load-module module-native-protocol-unix ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp -#load-module module-zeroconf-publish -### Load the RTP reciever module (also configured via paprefs, see above) +### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink" +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. @@ -90,7 +97,10 @@ load-module module-gconf .fail .endif -### Automatically restore the default sink/source when changed by the user during runtime +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are @@ -108,29 +118,33 @@ load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. +.ifexists module-console-kit.so load-module module-console-kit +.endif +.ifexists module-systemd-login.so +load-module module-systemd-login +.endif ### Enable positioned event sounds load-module module-position-event-sounds -### Cork music streams when a phone stream is active -load-module module-cork-music-on-phone +### Cork music/video streams when a phone stream is active +load-module module-role-cork -# X11 modules should not be started from default.pa so that one daemon -# can be shared by multiple sessions. +### Modules to allow autoloading of filters (such as echo cancellation) +### on demand. module-filter-heuristics tries to determine what filters +### make sense, and module-filter-apply does the heavy-lifting of +### loading modules and rerouting streams. +load-module module-filter-heuristics +load-module module-filter-apply -### Load X11 bell module -#load-module module-x11-bell sample=bell-windowing-system +### Load DBus protocol +.ifexists module-dbus-protocol.so +load-module module-dbus-protocol +.endif -### Register ourselves in the X11 session manager -#load-module module-x11-xsmp -### Publish connection data in the X11 root window -#.ifexists module-x11-publish.so -#.nofail -#load-module module-x11-publish -#.fail -#.endif +load-module module-switch-on-port-available ### Make some devices default #set-default-sink output diff --git a/mmfw-sysconf-cleansdk-target/etc/pulse/system.pa b/mmfw-sysconf-target-u3/etc/pulse/system.pa old mode 100644 new mode 100755 similarity index 58% rename from mmfw-sysconf-cleansdk-target/etc/pulse/system.pa rename to mmfw-sysconf-target-u3/etc/pulse/system.pa index 3d8a925..1600bd0 --- a/mmfw-sysconf-cleansdk-target/etc/pulse/system.pa +++ b/mmfw-sysconf-target-u3/etc/pulse/system.pa @@ -19,12 +19,21 @@ # This startup script is used only if PulseAudio is started in system # mode. +### Custom policy module to route between bt<=speaker +load-module module-policy + +#load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,0 fragment_size=8192 +#load-module module-alsa-source source_name=alsa_input.0.analog-stereo device=hw:0,0 fragment_size=8192 +#load-module module-alsa-source source_name=alsa_input.8.analog-stereo device=hw:0,8 mmap=0 +#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 tsched_buffer_size=2048576 +#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 fragment_size=8192 mmap=1 +load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,1 fragment_size=8192 mmap=1 tsched=1 tsched_buffer_size=262144 fixed_latency_range=1 + ### Automatically load driver modules depending on the hardware available -.ifexists module-hal-detect.so -#load-module module-hal-detect +.ifexists module-udev-detect.so +load-module module-udev-detect .else -### Alternatively use the static hardware detection module (for systems that -### lack HAL support) +### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif @@ -34,18 +43,26 @@ load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix -load-module module-bluetooth-discover +load-module module-bluetooth-policy -### Custom policy module to route between bt<=speaker -load-module module-policy +load-module module-bluetooth-discover +#load-module module-bluetooth-discover enable_scmst=true ### Automatically restore the volume of streams and devices #load-module module-stream-restore #load-module module-device-restore -### Automatically restore the default sink/source when changed by the user during runtime +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value load-module module-default-device-restore +.ifexists module-dbus-protocol.so +### If you want to allow TCP connections, set access to "remote" or "local,remote". +load-module module-dbus-protocol access=local +.endif + ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams @@ -54,13 +71,15 @@ load-module module-rescue-streams load-module module-always-sink ### Automatically suspend sinks/sources that become idle for too long -load-module module-suspend-on-idle +load-module module-suspend-on-idle timeout=1 ### Enable positioned event sounds #load-module module-position-event-sounds ### Set default source (not to use alsa_sink monitor which is index 0) -set-default-source alsa_input.0.analog-stereo +#set-default-source alsa_input.0.analog-stereo -load-module module-remap-sink sink_name=mono_alsa master=alsa_output.0.analog-stereo channels=1 +load-module module-null-sink +load-module module-remap-sink sink_name=mono_alsa master=alsa_output.1.analog-stereo channels=1 load-sample camera-shutter /usr/share/sounds/mm-camcorder/capture_shutter_02.wav +load-sample recording-stop /usr/share/sounds/mm-camcorder/recording_stop_01.wav diff --git a/mmfw-sysconf-target-u3/opt/system/mmfw_audio_volume.ini b/mmfw-sysconf-target-u3/opt/system/mmfw_audio_volume.ini new file mode 100644 index 0000000..1718563 --- /dev/null +++ b/mmfw-sysconf-target-u3/opt/system/mmfw_audio_volume.ini @@ -0,0 +1,45 @@ + +[speaker] +system = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000 +notification = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000 +alarm = 0.00000, 0.00891, 0.01413, 0.02239, 0.03162, 0.03981, 0.05012, 0.06310, 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +ringtone = 0.00000, 0.00891, 0.01413, 0.02239, 0.03162, 0.03981, 0.05012, 0.06310, 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +media = 0.00000, 0.00891, 0.01413, 0.02239, 0.03162, 0.03981, 0.05012, 0.06310, 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +call = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +voip = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +voice = 0.00000, 0.00891, 0.01413, 0.02239, 0.03162, 0.03981, 0.05012, 0.06310, 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +gain = 0.10000, 0.90000, 0.69104, 1.00000, 1.00000, 1.00000, 1.00000, 0.79370, 0.96549 + +[headset] +system = 0.00000, 0.01259, 0.01585, 0.01995, 0.02512, 0.03162, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623 +notification = 0.00000, 0.00398, 0.00501, 0.00631, 0.00794, 0.01000, 0.01259, 0.01585, 0.01995, 0.02512, 0.03162, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000 +alarm = 0.00000, 0.00398, 0.00501, 0.00631, 0.00794, 0.01000, 0.01259, 0.01585, 0.01995, 0.02512, 0.03162, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000 +ringtone = 0.00000, 0.00398, 0.00501, 0.00631, 0.00794, 0.01000, 0.01259, 0.01585, 0.01995, 0.02512, 0.03162, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000 +media = 0.00000, 0.00398, 0.00794, 0.01585, 0.03162, 0.05623, 0.07943, 0.11220, 0.14125, 0.17783, 0.22387, 0.28184, 0.35481, 0.50119, 0.70795, 1.00000 +call = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +voip = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +voice = 0.00000, 0.00398, 0.00794, 0.01585, 0.03162, 0.05623, 0.07943, 0.11220, 0.14125, 0.17783, 0.22387, 0.28184, 0.35481, 0.50119, 0.70795, 1.00000 +gain = 0.10000, 0.92832, 1.00000, 1.00000, 0.79370, 0.79370, 0.36840, 0.92832, 1.00000 + +[btheadset] +system = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000 +notification = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000 +alarm = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +ringtone = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000 +media = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +call = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +voip = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +voice = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +gain = 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000 + +[hdmi] +system = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000 +notification = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000 +alarm = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +ringtone = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000 +media = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +call = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +voip = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +voice = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000 +gain = 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000 + diff --git a/mmfw-sysconf-target-u3/usr/etc/gst-openmax.conf b/mmfw-sysconf-target-u3/usr/etc/gst-openmax.conf new file mode 100644 index 0000000..92a0e70 --- /dev/null +++ b/mmfw-sysconf-target-u3/usr/etc/gst-openmax.conf @@ -0,0 +1,143 @@ +omx_mpeg2dec, + type=GstOmxMpeg2Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.mp2, + sink="video/mpeg, mpegversion=(int)[1,2], systemstream=false, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max]; ", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_mpeg4dec, + type=GstOmxMpeg4Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.mp4, + sink="video/x-msmpeg, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], format=(fourcc){DIV3}; video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max]; video/x-divx, divxversion=(int)[4,5], width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max]; video/x-xvid, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max]; video/x-3ivx, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_h264dec, + type=GstOmxH264Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.avc, + sink="video/x-h264, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_h263dec, + type=GstOmxH263Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.h263, + sink="video/x-h263, variant=(string)itu, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_wmvdec, + type=GstOmxWmvDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.wmv, + sink="video/x-wmv, wmvversion=(int)3, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_vp8dec, + type=GstOmxVp8Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.vp8, + sink="video/x-vp8, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_rvdec, + type=GstOmxRvDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.rv, + sink="video/x-pn-realvideo, rmversion=(int)[3,4], format=(fourcc){RV30,RV40}, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_avsdec, + type=GstOmxAvsDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.avs, + sink="video/x-avs, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_mjpegdec, + type=GstOmxMjpegDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mjpeg, + sink="video/x-jpeg, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_mp3dec, + type=GstOmxMp3Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/mpeg, mpegversion=(int)1, layer=(int)[1,3], parsed=true", + src="audio/x-raw-int", + rank=257; + +omx_aacdec, + type=GstOmxAacDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-aac;audio/mpeg, mpegversion=(int){2,4}, framed=true", + src="audio/x-raw-int, hassubdata=true", + rank=257; + +omx_ac3dec, + type=GstOmxAc3Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-ac3, framed=true;audio/x-eac3, framed=true;audio/ac3, framed=true", + src="audio/x-raw-int, hassubdata=true", + rank=257; + +omx_adpcmdec, + type=GstOmxAdpcmDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-adpcm", + src="audio/x-raw-int", + rank=257; + +omx_wmadec, + type=GstOmxWmaDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-wma", + src="audio/x-raw-int", + rank=257; + +omx_dtsdec, + type=GstOmxDtsDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-dts, framed=true", + src="audio/x-raw-int, hassubdata=true", + rank=257; + +omx_vorbisdec, + type=GstOmxVorbisDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-vorbis", + src="audio/x-raw-int", + rank=257; + +omx_radec, + type=GstOmxRaDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-pn-realaudio", + src="audio/x-raw-int", + rank=257; + +omx_g711dec, + type=GstOmxG711Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-alaw; audio/x-mulaw", + src="audio/x-raw-int", + rank=257; diff --git a/mmfw-sysconf-target-u3/usr/etc/gst-tz-openmax.conf b/mmfw-sysconf-target-u3/usr/etc/gst-tz-openmax.conf new file mode 100644 index 0000000..4decb28 --- /dev/null +++ b/mmfw-sysconf-target-u3/usr/etc/gst-tz-openmax.conf @@ -0,0 +1,140 @@ +omx_tz_mpeg2dec, + type=GstOmxTZMpeg2Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.mp2, + sink="video/mpeg, mpegversion=(int)[1,2], systemstream=false, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true; ", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_tz_mpeg4dec, + type=GstOmxTZMpeg4Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.mp4, + sink="video/x-msmpeg, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], format=(fourcc){DIV3}, secure=(boolean)true; video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true; video/x-divx, divxversion=(int)[4,5], width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true; video/x-xvid, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true; video/x-3ivx, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; +omx_tz_h264dec, + type=GstOmxTZH264Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.avc, + sink="video/x-h264, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_tz_h263dec, + type=GstOmxTZH263Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.h263, + sink="video/x-h263, variant=(string)itu, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_tz_wmvdec, + type=GstOmxTZWmvDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.wmv, + sink="video/x-wmv, wmvversion=(int)3, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_tz_vp8dec, + type=GstOmxTZVp8Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.vp8, + sink="video/x-vp8, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_tz_rvdec, + type=GstOmxTZRvDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.rv, + sink="video/x-pn-realvideo, rmversion=(int)[3,4], format=(fourcc){RV30,RV40}, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_tz_avsdec, + type=GstOmxTZAvsDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mfc.avs, + sink="video/x-avs, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_tz_mjpegdec, + type=GstOmxTZMjpegDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.video_decoder.mjpeg, + sink="video/x-jpeg, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;", + src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];", + rank=257; + +omx_tz_mp3dec, + type=GstOmxTZMp3Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/mpeg, mpegversion=(int)1, layer=(int)[1,3], parsed=true, secure=(boolean)true", + src="audio/x-raw-int", + rank=257; + +omx_tz_aacdec, + type=GstOmxTZAacDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-aac;audio/mpeg, mpegversion=(int){2,4}, framed=true, secure=(boolean)true", + src="audio/x-raw-int", + rank=257; +omx_tz_ac3dec, + type=GstOmxTZAc3Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-ac3,secure=(boolean)true;audio/x-eac3,secure=(boolean)true;audio/ac3,secure=(boolean)true;", + src="audio/x-raw-int", + rank=257; +omx_tz_adpcmdec, + type=GstOmxTZAdpcmDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-adpcm, secure=(boolean)true", + src="audio/x-raw-int", + rank=257; + +omx_tz_wmadec, + type=GstOmxTZWmaDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-wma, secure=(boolean)true", + src="audio/x-raw-int", + rank=257; + +omx_tz_dtsdec, + type=GstOmxTZDtsDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-dts, framed=true, secure=(boolean)true", + src="audio/x-raw-int", + rank=257; + +omx_tz_vorbisdec, + type=GstOmxTZVorbisDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-vorbis, secure=(boolean)true", + src="audio/x-raw-int", + rank=257; + +omx_tz_radec, + type=GstOmxTZRaDec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-pn-realaudio, secure=(boolean)true", + src="audio/x-raw-int", + rank=257; + +omx_tz_g711dec, + type=GstOmxTZG711Dec, + library-name=libSDP_OMX_Core.so.0, + component-name=OMX.SDP.AUDANY.Decoder, + sink="audio/x-alaw, secure=(boolean)true; audio/x-mulaw, secure=(boolean)true", + src="audio/x-raw-int", + rank=257; diff --git a/mmfw-sysconf-target-u3/usr/etc/mmfw_avsystem.ini b/mmfw-sysconf-target-u3/usr/etc/mmfw_avsystem.ini new file mode 100644 index 0000000..0742c30 --- /dev/null +++ b/mmfw-sysconf-target-u3/usr/etc/mmfw_avsystem.ini @@ -0,0 +1,8 @@ +[aif] + +control aif before path set = no + +[debug] + +gain debug mode = no + diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_camcorder.ini b/mmfw-sysconf-target-u3/usr/etc/mmfw_camcorder.ini similarity index 79% rename from mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_camcorder.ini rename to mmfw-sysconf-target-u3/usr/etc/mmfw_camcorder.ini index e62993e..80d2e82 100644 --- a/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_camcorder.ini +++ b/mmfw-sysconf-target-u3/usr/etc/mmfw_camcorder.ini @@ -28,14 +28,16 @@ ModelName = GT-TIZEN [VideoInput] UseConfCtrl = 1 ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini -VideosrcElement = camerasrc | 2,0 | do-timestamp,1 | num-alloc-buf,7 -UseVideoscale = 0 +ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini +VideosrcElement = v4l2src | 1,0 | do-timestamp,1 +UseVideoscale = 1 VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1 -UseZeroCopyFormat = 1 +UseZeroCopyFormat = 0 DeviceCount = 1 [AudioInput] -AudiosrcElement = avsysaudiosrc | 3,0 | do-timestamp,1 | slave-method,3 | latency,0 +AudiosrcElement = audiotestsrc | 4,0 | do-timestamp,1 | slave-method,3 | latency,0 | is-live,1 +;AudiosrcElement = alsasrc | 3,0 | do-timestamp,1 | slave-method,3 | latency,0 AudiomodemsrcElement = voicedatasrcbin | 0,0 [VideoOutput] @@ -47,39 +49,38 @@ DisplayDevice = 0 || 0 DisplayMode = 0,1,2 || 0 ; Videosink ;;; 0: X surface, 1: Evas surface, 2: GL surface, 3: NULL surface -Videosink = 0,1,3 || 0 +Videosink = 0,1,3 || 1 VideosinkElementX = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0 VideosinkElementEvas = evasimagesink | 4,0 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0 VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-buffer,0 | show-preroll-frame,0 -UseVideoscale = 0 -VideoscaleElement = fimcconvert | 1,0 | rotang,90 +UseVideoscale = 1 +VideoscaleElement = fimcconvert | 1,0 | rotang,0 +;VideoscaleElement = videoscale [VideoEncoder] -H263 = omx_h263enc | 0,0 -H264 = omx_h264enc | 0,0 -MPEG4 = omx_mpeg4enc | 0,0 +MPEG4 = avenc_mpeg4 | 0,0 [AudioEncoder] AMR = amrnbenc | 0,0 -AAC = ffenc_aac | 0,0 +AAC = avenc_aac | 1,0 | compliance,-2 WAVE = wavenc | 0,0 [ImageEncoder] -JPEG = secjpeg_enc | 0,0 +JPEG = jpegenc | 0,0 ;PNG = pngenc | 0,0 [Capture] -UseEncodebin = 0 +UseEncodebin = 1 UseCaptureMode = 0 VideoscaleElement = videoscale | 1,0 | method,1 [Record] UseAudioEncoderQueue = 1 -UseVideoEncoderQueue = 1 +UseVideoEncoderQueue = 0 VideoProfile = 0 VideoAutoAudioConvert = 1 VideoAutoAudioResample = 0 -VideoAutoColorSpace = 0 +VideoAutoColorSpace = 1 AudioProfile = 1 AudioAutoAudioConvert = 1 AudioAutoAudioResample = 0 @@ -94,11 +95,12 @@ DropVideoFrame = 0 PassFirstVideoFrame = 0 [Mux] -3GP = ffmux_3gp | 0,0 -AMR = ffmux_amr | 0,0 -MP4 = ffmux_mp4 | 0,0 +3GP = avmux_3gp | 0,0 +AMR = avmux_amr | 0,0 +MP4 = avmux_mp4 | 0,0 AVI = avimux | 0,0 MATROSKA = matroskamux | 0,0 WAV = wavenc | 0,0 -AAC = ffmux_adts | 0,0 +AAC = avmux_adts | 0,0 +M2TS = mpegtsmux | 0,0 diff --git a/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_camcorder_dev_video_pri.ini b/mmfw-sysconf-target-u3/usr/etc/mmfw_camcorder_dev_video_pri.ini similarity index 80% rename from mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_camcorder_dev_video_pri.ini rename to mmfw-sysconf-target-u3/usr/etc/mmfw_camcorder_dev_video_pri.ini index 0370ee6..c671e5a 100644 --- a/mmfw-sysconf-cleansdk-e4x12/usr/etc/mmfw_camcorder_dev_video_pri.ini +++ b/mmfw-sysconf-target-u3/usr/etc/mmfw_camcorder_dev_video_pri.ini @@ -20,26 +20,27 @@ ; Input index - MSL value(convert array index) ;;; -1:NONE, 0:CAMERA0, 1:CAMERA1 InputIndex = 0,-255 || 0 -DeviceName = S5C73M3 -PreviewResolution = 176,144 | 320,240 | 640,480 | 960,720 | 1280,720 | 1920,1080 || 640,480 -CaptureResolution = 640,480 | 1280,720 | 2048,1152 | 2048,1536 | 3264,1836 | 3264,2176 | 3264,2448 || 3264,2448 -FPS = 0,8,15,24,25,30,60,120 || 30 +DeviceName = USB_CAMERA +PreviewResolution = 320,240 | 640,480 || 320,240 +CaptureResolution = 320,240 | 640,480 || 640,480 +VideoResolution = 320,240 | 640,480 || 640,480 +FPS = 0,15,30 || 15 ; PictureForamt - MSL value -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY -PictureFormat = 0,4,5,7,14 || 14 +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264 +PictureFormat = 7 || 7 Overlay = 0,1 || 1 ; Recommend display rotation ;;; 0:NONE, 1:90, 2:180, 3:270 -RecommendDisplayRotation = 3 +RecommendDisplayRotation = 0 ; Recommend preview format for capture -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY -RecommendPreviewFormatCapture = 14 +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264 +RecommendPreviewFormatCapture = 7 ; Recommend preview format for record -;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY -RecommendPreviewFormatRecord = 14 +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264 +RecommendPreviewFormatRecord = 7 ; Recommend preview resolution -;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9) -RecommendPreviewResolution = 960,720 | 1280,720 || 960,720 +;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9), 2: SQUARE ratio(1:1) +RecommendPreviewResolution = 320,240 | 320,240 | 320,240 || 320,240 ; Camera facing direction ;;; 0:REAR, 1:FRONT FacingDirection = 0 @@ -59,15 +60,15 @@ StrobeMode = 1,3,2,-255,-255,-255,-255,4 || 2 [Effect] Brightness = 0,8 || 4 -Contrast = 1,7 || 4 -Saturation = 0,4 || 2 -Sharpness = 0,4 || 2 +;Contrast = 1,7 || 4 +;Saturation = 0,4 || 2 +;Sharpness = 0,4 || 2 ; White balance - real setting value ;;; 0:AUTO, 1:DAYLIGHT, 2:CLOUDY, 3:TUNGSTEN, 4:FLUORESCENT ; White balance - MSL value(convert array index) ;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM -WhiteBalance = -255,1,2,3,5,4,-255,-255,-255,-255 || 1 +WhiteBalance = -255,0,-255,-255,-255,-255,-255,-255,-255,-255 || 0 ; Color tone - real setting value ;;; 1:NONE, 2:MONO, 3:SEPIA, 4:AQUA, 5:ANTIQUE, 6:NEGATIVE, 7:SHARPEN, 8:SKETCH, 9:WASHED, 10:VINTAGE_WARM @@ -76,7 +77,7 @@ WhiteBalance = -255,1,2,3,5,4,-255,-255,-255,-255 || 1 ;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED, ;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED, ;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW -ColorTone = 1,2,3,6,-255,-255,4,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,12,8,9,10,11,13,20,-255,17,14,-255,15 || 1 +ColorTone = 1,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 1 ; Flip - real setting value ;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL ; Flip - MSL value(convert array index) @@ -87,7 +88,7 @@ ColorTone = 1,2,3,6,-255,-255,4,-255,-255,-255,-255,-255,-255,-255,-255,-255,-25 ;;; 0:OFF, 1:ON ; Wide Dynamic Range - MSL value(convert array index) ;;; 0:OFF, 1:ON, 2:AUTO -WDR = 0,1,-255 || 0 +WDR = 0,-255,-255 || 0 ; Part color mode - real setting value ;;; 0:OFF, 1:SWAP, 2:ACCENT @@ -106,26 +107,26 @@ WDR = 0,1,-255 || 0 [Photograph] ;LensInit = 0,1 || 0 -DigitalZoom = 0,30 || 0 -OpticalZoom = 0,0 || 0 +;DigitalZoom = 0,10 || 0 +;OpticalZoom = 0,0 || 0 ; Focus mode - real setting value ;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS ; Focus mode - MSL value(convert array index) ;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS -FocusMode = -255,-255,0,-255,3,4 || 3 +FocusMode = 0,-255,-255,-255,-255,-255 || 0 ; Auto focus type - real setting value ;;; 0:NORMAL, 1:MACRO, 2:FULL ; Auto focus - MSL value(convert array index) ;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL -AFType = -255,0,1,-255 || 0 +AFType = 0,-255,-255,-255 || 0 ; Auto exposure type - real setting value ;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX ; Auto exposure mode - MSL value(convert array index) ;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2 -AEType = -255,1,2,-255,-255,3,-255,-255,-255 || 1 +AEType = -255,0,-255,-255,-255,-255,-255,-255,-255 || 0 ;ExposureValue - Not support ;FNumber - Not support @@ -135,7 +136,7 @@ AEType = -255,1,2,-255,-255,3,-255,-255,-255 || 1 ;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600 ; ISO - MSL value(convert array index) ;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200 -ISO = 0,-255,2,3,4,5,6,-255 || 0 +ISO = 0,-255,-255,-255,-255,-255,-255,-255 || 0 ; Program mode - real setting value ;;; 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN, @@ -143,13 +144,13 @@ ISO = 0,-255,2,3,4,5,6,-255 || 0 ; Program mode - MSL value(convert array index) ;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE, ;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT -ProgramMode = 1,2,5,6,7,8,9,10,11,3,12,13,-255,14,4 || 1 +ProgramMode = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0 ; Anti-handshake - real setting value ;;; 0:OFF, 1:ON ; Anti-handshake - MSL value(convert array index) ;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON -AntiHandshake = 0,1,-255,-255 || 0 +AntiHandshake = 0,-255,-255,-255 || 0 ; Video-stabilization - real setting value ;;; 0:OFF, 1:ON @@ -159,7 +160,7 @@ VideoStabilization = 0 || 0 ; Face zoom mode ;;; 0:OFF, 1:ON -FaceZoomMode = 0,1 || 0 +FaceZoomMode = 0 || 0 ; Face zoom level FaceZoomLevel = 0,0 || 0 @@ -168,10 +169,10 @@ FaceZoomLevel = 0,0 || 0 ; Output mode ;;; No need to convert ;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY -OutputMode = 0,4,7,13 || 13 -JpegQuality = 0,100 || 50 -MultishotNumber = 1,255 || 1 -SensorEncodedCapture = 1 +OutputMode = 7,13 || 13 +JpegQuality = 0,100 || 90 +MultishotNumber = 1,1 || 1 +SensorEncodedCapture = 0 ; Support HDR ;;; 0: OFF, 1: ON, 2: ON and Original SupportHDR = 0,-255,-255 || 0 @@ -180,7 +181,7 @@ SupportHDR = 0,-255,-255 || 0 [Detect] ; Detect mode ;;; 0:OFF, 1:ON -DetectMode = 0,1 || 0 +DetectMode = 0,-255 || 0 ;DetectNumber - Not support ;DetectFocusSelect - Not support ;DetectSelectNumber - Not support diff --git a/mmfw-sysconf-target-u3/usr/etc/mmfw_player.ini b/mmfw-sysconf-target-u3/usr/etc/mmfw_player.ini new file mode 100644 index 0000000..9d1c5ae --- /dev/null +++ b/mmfw-sysconf-target-u3/usr/etc/mmfw_player.ini @@ -0,0 +1,127 @@ +[general] + +; if disabled typefind element will used directely +use decodebin = yes + +; for retransmission enable = yes, disable = no +use rtp retransmission = no + +disable segtrap = yes ; same effect with --gst-disable-segtrap + +; set default videosink element according to video surface type(X, EVAS, NULL) +videosink element x = xvimagesink +videosink element evas = evasimagesink +videosink element fake = fakesink + +video converter element = + +audiosink element = alsasink + + +drmsrc element = filesrc + +; if yes. gstreamer will not update registry +skip rescan = yes +delay before repeat = 50 ; msec + +; comma separated list of tocken which elemnts has it in it's name will not be used +;element exclude keyword = omx_mpeg2dec,omx_mpeg4dec,omx_h263dec,omx_wmvdec,omx_mp3dec,omx_mp3dec,omx_aacdec + +; ignore resume play just for debugging +ignore first skip request = no + +;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE) +video decoder type = 0 +audio decoder type = 0 + +async start = yes + +multiple codec supported = yes + +; parameters for initializing gstreamer +; DEFAULT SET (--gst-debug=*:2) +gstparam1 = --gst-debug=*:2 +gstparam2 = +gstparam3 = +gstparam4 = +gstparam5 = + +; generating dot file representing pipeline state +; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/" +generate dot = no + +; parameter for clock provide in audiosink +provide clock for music = yes +provide clock for movie = yes + +; allowed timeout for changing pipeline state +live state change timeout = 30 ; sec +localplayback state change timeout = 10 ; sec + +; delay in msec for sending EOS +eos delay = 0 ; msec + +; for asm function enable = yes, disable = no +enable asm = yes + +[http streaming] + +httpsrc element = souphttpsrc + +; if set, use file or not use memory for buffering +http file buffer path = /opt/usr/media + +http buffering limit = 99.0 ; percent + +http max size bytes = 1048576 ; bytes + +http buffering time = 1.2 + +http timeout = 30 ; sec + + +[rtsp streaming] + +rtspsrc element = rtspsrc + +rtsp buffering time = 5000; msec + +rtsp rebuffering time = 15000; msec + +rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging + +rtsp error concealment = yes + +;transport to use, 7 for default (tcp+udp-multicast+udp-unicast), 4 for TCP +rtsp lower protocol = 7; + +[hw accelation] +use video hw accel = no + + +[priority] + +use priority setting = no + +demux = 95 + +videosink = 96 + +audiosink = 97 + +ringbuffer = 98 + +[subtitle] +; related to the textbin structure +; if yes, textbin need to consider the external display to print subtitle +support external display = no + +; subtitle default value when 'support external display = yes' +mirroring width = 1920 + +mirroring height = 1080 + +font color = 0xffffffff + +font background color = 0x00000000 + diff --git a/mmfw-sysconf-cleansdk-target/usr/etc/mmfw_player_audio_effect.ini b/mmfw-sysconf-target-u3/usr/etc/mmfw_player_audio_effect.ini similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/etc/mmfw_player_audio_effect.ini rename to mmfw-sysconf-target-u3/usr/etc/mmfw_player_audio_effect.ini diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf diff --git a/mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf similarity index 100% rename from mmfw-sysconf-cleansdk-target/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf rename to mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf diff --git a/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf new file mode 100644 index 0000000..31bc6a6 --- /dev/null +++ b/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf @@ -0,0 +1,120 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Default profile definitions for the ALSA backend of PulseAudio. This +; is used as fallback for all cards that have no special mapping +; assigned (and should be good enough for the vast majority of +; cards). If you want to assign a different profile set than this one +; to a device, either set the udev property PULSE_PROFILE_SET for the +; card, or use the "profile_set" module argument when loading +; module-alsa-card. +; +; So what is this about? Simply, what we do here is map ALSA devices +; to how they are exposed in PA. We say which ALSA device string to +; use to open a device, which channel mapping to use then, and which +; mixer path to use. This is encoded in a 'mapping'. Multiple of these +; mappings can be bound together in a 'profile' which is then directly +; exposed in the UI as a card profile. Each mapping assigned to a +; profile will result in one sink/source to be created if the profile +; is selected for the card. +; +; Additionally, the path set configuration files can describe the +; decibel values assigned to the steps of the volume elements. This +; can be used to work around situations when the alsa driver doesn't +; provide any decibel information, or when the information is +; incorrect. + + +; [General] +; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate +; # them by combining every input mapping with every output mapping. +; +; [Mapping id] +; device-strings = ... # ALSA device string. %f will be replaced by the card identifier. +; channel-map = ... # Channel mapping to use for this device +; description = ... +; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed. +; # If multiple are found to be working they will be available as device ports +; paths-output = ... +; element-input = ... # Instead of configuring a full mixer path simply configure a single +; # mixer element for volume/mute handling +; element-output = ... +; priority = ... +; direction = any | input | output # Only useful for? +; +; [Profile id] +; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be +; # defined in this file too +; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be +; # defined in this file too +; description = ... +; priority = ... # Numeric value to deduce priority for this profile +; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile +; # will be assumed as working without probing. Makes initialization +; # a bit faster but only works if the card is really known well. +; +; [DecibelFix element] # Decibel fixes can be used to work around missing or incorrect dB +; # information from alsa. A decibel fix is a table that maps volume steps +; # to decibel values for one volume element. The "element" part in the +; # section title is the name of the volume element. +; # +; # NOTE: This feature is meant just as a help for figuring out the correct +; # decibel values. PulseAudio is not the correct place to maintain the +; # decibel mappings! +; # +; # If you need this feature, then you should make sure that when you have +; # the correct values figured out, the alsa driver developers get informed +; # too, so that they can fix the driver. +; +; db-values = ... # The option value consists of pairs of step numbers and decibel values. +; # The pairs are separated with whitespace, and steps are separated from +; # the corresponding decibel values with a colon. The values must be in an +; # increasing order. Here's an example of a valid string: +; # +; # "0:-40.50 1:-38.70 3:-33.00 11:0" +; # +; # The lowest step imposes a lower limit for hardware volume and the +; # highest step correspondingly imposes a higher limit. That means that +; # that the mixer will never be set outside those values - the rest of the +; # volume scale is done using software volume. +; # +; # As can be seen in the example, you don't need to specify a dB value for +; # each step. The dB values for skipped steps will be linearly interpolated +; # using the nearest steps that are given. + +[General] +auto-profiles = yes + +[Mapping usb-analog-stereo] +device-strings = hw:%f +channel-map = left,right +paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono +priority = 10 +direction = output + +[Mapping usb-analog-surround-51] +device-strings = hw:%f +;channel-map = front-left,front-right,front-center,lfe,rear-left,rear-right +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-lfe-on-mono +priority = 180 +direction = output + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/packaging/mmfw-sysconf-cleansdk-e4x12.spec b/packaging/mmfw-sysconf-cleansdk-e4x12.spec deleted file mode 100644 index 3708892..0000000 --- a/packaging/mmfw-sysconf-cleansdk-e4x12.spec +++ /dev/null @@ -1,37 +0,0 @@ -Name: mmfw-sysconf-cleansdk-e4x12 -Summary: Multimedia Framework system configuration package -Version: 0.1.66 -Release: 0 -Group: TO_BE/FILLED_IN -License: Apache-2.0 -Source0: mmfw-sysconf-%{version}.tar.gz -ExclusiveArch: %arm - -%description -Multimedia Framework system configuration package - -%prep -%setup -q -n mmfw-sysconf-%{version} - -%build - -%install -rm -rf %{buildroot} -mkdir -p %{buildroot}/etc -mkdir -p %{buildroot}/usr -cp -arf mmfw-sysconf-cleansdk-e4x12/* %{buildroot} - -%post - -%postun - -%files -%manifest mmfw-sysconf-cleansdk-e4x12.manifest -%defattr(-,root,root,-) -/etc/asound.conf -/etc/pulse/* -/usr/etc/*.ini -/usr/etc/gst-openmax.conf -/usr/share/pulseaudio/alsa-mixer/paths/*.conf -/usr/share/pulseaudio/alsa-mixer/paths/*.common -/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf diff --git a/packaging/mmfw-sysconf-cleansdk-target.spec b/packaging/mmfw-sysconf-cleansdk-target.spec deleted file mode 100644 index fb9937e..0000000 --- a/packaging/mmfw-sysconf-cleansdk-target.spec +++ /dev/null @@ -1,37 +0,0 @@ -Name: mmfw-sysconf-cleansdk-target -Summary: Multimedia Framework system configuration package -Version: 0.1.66 -Release: 0 -Group: TO_BE/FILLED_IN -License: Apache-2.0 -Source0: mmfw-sysconf-%{version}.tar.gz -ExclusiveArch: %arm - -%description -Multimedia Framework system configuration package - -%prep -%setup -q -n mmfw-sysconf-%{version} - -%build - -%install -rm -rf %{buildroot} -mkdir -p %{buildroot}/etc -mkdir -p %{buildroot}/usr -cp -arf mmfw-sysconf-cleansdk-target/* %{buildroot} - -%post - -%postun - -%files -%manifest mmfw-sysconf-cleansdk-target.manifest -%defattr(-,root,root,-) -/etc/asound.conf -/etc/pulse/* -/usr/etc/*.ini -/usr/etc/gst-openmax.conf -/usr/share/pulseaudio/alsa-mixer/paths/*.conf -/usr/share/pulseaudio/alsa-mixer/paths/*.common -/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf diff --git a/packaging/mmfw-sysconf-simulator.spec b/packaging/mmfw-sysconf-simulator.spec deleted file mode 100644 index 68b9fda..0000000 --- a/packaging/mmfw-sysconf-simulator.spec +++ /dev/null @@ -1,37 +0,0 @@ -Name: mmfw-sysconf-simulator -Summary: Multimedia Framework system configuration package -Version: 0.1.66 -Release: 0 -Group: TO_BE/FILLED_IN -License: Apache-2.0 -Source0: mmfw-sysconf-%{version}.tar.gz -ExclusiveArch: %{ix86} - -%description -Multimedia Framework system configuration package for simulator - -%prep -%setup -q -n mmfw-sysconf-%{version} - -%build - -%install -rm -rf %{buildroot} -mkdir -p %{buildroot}/etc -mkdir -p %{buildroot}/usr -cp -arf mmfw-sysconf-simulator/* %{buildroot} - -%post - -%postun - -%files -%manifest mmfw-sysconf-simulator.manifest -%defattr(-,root,root,-) -/etc/asound.conf -/etc/pulse/* -/usr/etc/*.ini -/usr/etc/gst-openmax.conf -/usr/share/pulseaudio/alsa-mixer/paths/*.conf -/usr/share/pulseaudio/alsa-mixer/paths/*.common -/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf diff --git a/packaging/mmfw-sysconf.spec b/packaging/mmfw-sysconf.spec index c16b8e9..faea2aa 100644 --- a/packaging/mmfw-sysconf.spec +++ b/packaging/mmfw-sysconf.spec @@ -1,26 +1,116 @@ Name: mmfw-sysconf Summary: Multimedia Framework system configuration package -Version: 0.1.66 +Version: 0.2.0 Release: 0 -Group: TO_BE/FILLED_IN +Group: Multimedia/Configuration License: Apache-2.0 Source0: mmfw-sysconf-%{version}.tar.gz -ExcludeArch: %{ix86} -ExcludeArch: %{arm} %description -Multimedia Framework system configuration package for simulator +Multimedia Framework system configuration package including ini, conf and etc files. + + +%ifarch %{arm} + +%package target-u3 +Summary: Multimedia Framework system configuration package for u3 +Group: Multimedia/Configuration +License: Apache-2.0 + +%description target-u3 +Multimedia Framework system configuration package including ini, conf and etc files for u3 target. + +%else + +%package simulator +Summary: Multimedia Framework system configuration package for simulator +Group: Multimedia/Configuration +License: Apache-2.0 + +%description simulator +Multimedia Framework system configuration package including ini, conf and etc files for simulator. + +%endif + %prep -%setup -q -n mmfw-sysconf-%{version} +%setup -q -n %{name}-%{version} + %build + %install +rm -rf %{buildroot} +mkdir -p %{buildroot}%{_datadir} + + +%ifarch %{arm} + +mkdir -p %{buildroot}%{_datadir}/%{name}-target-u3 +cp -arf %{name}-target-u3/* %{buildroot}%{_datadir}/%{name}-target-u3 +mkdir -p %{buildroot}%{_datadir}/%{name}-target-u3/usr/share/license +cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-target-u3/usr/share/license/%{name}-target-u3 +cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-target-u3/usr/share/license/%{name}-target-u3 + +%else -%post +mkdir -p %{buildroot}%{_datadir}/%{name}-simulator +cp -arf %{name}-simulator/* %{buildroot}%{_datadir}/%{name}-simulator +mkdir -p %{buildroot}%{_datadir}/%{name}-simulator/usr/share/license +cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-simulator/usr/share/license/%{name}-simulator +cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-simulator/usr/share/license/%{name}-simulator -%postun +%endif -%files + +%ifarch %{arm} + +%post target-u3 +cp -arf %{_datadir}/mmfw-sysconf-target-u3/* / +rm -rf %{_datadir}/mmfw-sysconf-target-u3 + +%else + +%post simulator +cp -arf %{_datadir}/mmfw-sysconf-simulator/* / +rm -rf %{_datadir}/mmfw-sysconf-simulator + +%endif + + +%postun + + +%ifarch %{arm} + +%files target-u3 +%manifest mmfw-sysconf-target-u3.manifest %defattr(-,root,root,-) +%{_datadir}/mmfw-sysconf-target-u3/etc/asound.conf +%{_datadir}/mmfw-sysconf-target-u3/etc/pulse/* +%{_datadir}/mmfw-sysconf-target-u3/usr/etc/*.ini +%{_datadir}/mmfw-sysconf-target-u3/usr/etc/gst-openmax.conf +%{_datadir}/mmfw-sysconf-target-u3/usr/etc/gst-tz-openmax.conf +%{_datadir}/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/*.conf +%{_datadir}/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/*.common +%{_datadir}/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf +%{_datadir}/mmfw-sysconf-target-u3/opt/system/* +%{_datadir}/mmfw-sysconf-target-u3/usr/share/license/mmfw-sysconf-target-u3 + +%else + +%files simulator +%manifest mmfw-sysconf-simulator.manifest +%defattr(-,root,root,-) +%{_datadir}/mmfw-sysconf-simulator/etc/asound.conf +%{_datadir}/mmfw-sysconf-simulator/etc/pulse/* +%{_datadir}/mmfw-sysconf-simulator/usr/etc/*.ini +%{_datadir}/mmfw-sysconf-simulator/usr/etc/gst-openmax.conf +%{_datadir}/mmfw-sysconf-simulator/usr/share/pulseaudio/alsa-mixer/paths/*.conf +%{_datadir}/mmfw-sysconf-simulator/usr/share/pulseaudio/alsa-mixer/paths/*.common +%{_datadir}/mmfw-sysconf-simulator/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf +%{_datadir}/mmfw-sysconf-simulator/usr/share/license/mmfw-sysconf-simulator + +%endif + -- 2.7.4