From 35486813c41b3a5229b4987857ff597704feda21 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Sun, 13 Nov 2022 22:12:50 +0300 Subject: [PATCH] dt-bindings: PCI: dwc: Add interrupts/interrupt-names common properties Currently the 'interrupts' and 'interrupt-names' properties are defined being too generic to really describe any actual IRQ interface. Moreover the DW PCIe End-point devices are left with no IRQ signals. All of that can be fixed by adding the IRQ-related properties to the common DW PCIe DT-schemas in accordance with the hardware reference manual. The DW PCIe common DT-schema will contain the generic properties definitions with just a number of entries per property, while the DW PCIe RP/EP-specific schemas will have the particular number of items and the generic resource names listed. Note since there are DW PCI-based vendor-specific DT-bindings with the custom names assigned to the same IRQ resources we have no much choice but to add them to the generic DT-schemas in order to have the schemas being applicable for such devices. These names are marked as vendor-specific and should be avoided being used in new bindings in favor of the generic names. Link: https://lore.kernel.org/r/20221113191301.5526-10-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring --- .../bindings/pci/snps,dw-pcie-common.yaml | 19 +++++ .../devicetree/bindings/pci/snps,dw-pcie-ep.yaml | 52 +++++++++++++ .../devicetree/bindings/pci/snps,dw-pcie.yaml | 90 +++++++++++++++++++++- 3 files changed, 158 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml index e63c217..4646fb1 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml @@ -17,6 +17,25 @@ description: select: false properties: + interrupts: + description: + There are two main sub-blocks which are normally capable of + generating interrupts. It's System Information Interface and MSI + interface. While the former one has some common for the Host and + Endpoint controllers IRQ-signals, the later interface is obviously + Root Complex specific since it's responsible for the incoming MSI + messages signalling. The System Information IRQ signals are mainly + responsible for reporting the generic PCIe hierarchy and Root + Complex events like VPD IO request, general AER, PME, Hot-plug, link + bandwidth change, link equalization request, INTx asserted/deasserted + Message detection, embedded DMA Tx/Rx/Error. + minItems: 1 + maxItems: 26 + + interrupt-names: + minItems: 1 + maxItems: 26 + phys: description: There can be up to the number of possible lanes PHYs specified placed in diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index 71dd19a..7d3f8fc 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -41,6 +41,55 @@ properties: items: enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl] + interrupts: + description: + There is no mandatory IRQ signals for the normal controller functioning, + but in addition to the native set the platforms may have a link- or + PM-related IRQs specified. + minItems: 1 + maxItems: 20 + + interrupt-names: + minItems: 1 + maxItems: 20 + items: + oneOf: + - description: + Controller request to read or write virtual product data + from/to the VPD capability registers. + const: vpd + - description: + Link Equalization Request flag is set in the Link Status 2 + register (applicable if the corresponding IRQ is enabled in + the Link Control 3 register). + const: l_eq + - description: + Indicates that the eDMA Tx/Rx transfer is complete or that an + error has occurred on the corresponding channel. eDMA can have + eight Tx (Write) and Rx (Read) eDMA channels thus supporting up + to 16 IRQ signals all together. Write eDMA channels shall go + first in the ordered row as per default edma_int[*] bus setup. + pattern: '^dma([0-9]|1[0-5])?$' + - description: + PCIe protocol correctable error or a Data Path protection + correctable error is detected by the automotive/safety + feature. + const: sft_ce + - description: + Indicates that the internal safety mechanism has detected an + uncorrectable error. + const: sft_ue + - description: + Application-specific IRQ raised depending on the vendor-specific + events basis. + const: app + - description: + Vendor-specific IRQ names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native "app" IRQ for details + enum: [ intr ] + max-functions: maximum: 32 @@ -60,6 +109,9 @@ examples: <0xd0000000 0x2000000>; /* Configuration space */ reg-names = "dbi", "dbi2", "addr_space"; + interrupts = <23>, <24>; + interrupt-names = "dma0", "dma1"; + phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>; phy-names = "pcie0", "pcie1", "pcie2", "pcie3"; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 85861b7..fa1db57 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -42,9 +42,92 @@ properties: enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl, parf, cfg, link, ulreg, smu, mpu, apb, phy ] - interrupts: true - - interrupt-names: true + interrupts: + description: + DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt + signal is supposed to be specified for the host controller. + minItems: 1 + maxItems: 26 + + interrupt-names: + minItems: 1 + maxItems: 26 + items: + oneOf: + - description: + Controller request to read or write virtual product data + from/to the VPD capability registers. + const: vpd + - description: + Link Equalization Request flag is set in the Link Status 2 + register (applicable if the corresponding IRQ is enabled in + the Link Control 3 register). + const: l_eq + - description: + Indicates that the eDMA Tx/Rx transfer is complete or that an + error has occurred on the corresponding channel. eDMA can have + eight Tx (Write) and Rx (Read) eDMA channels thus supporting up + to 16 IRQ signals all together. Write eDMA channels shall go + first in the ordered row as per default edma_int[*] bus setup. + pattern: '^dma([0-9]|1[0-5])?$' + - description: + PCIe protocol correctable error or a Data Path protection + correctable error is detected by the automotive/safety + feature. + const: sft_ce + - description: + Indicates that the internal safety mechanism has detected an + uncorrectable error. + const: sft_ue + - description: + Application-specific IRQ raised depending on the vendor-specific + events basis. + const: app + - description: + DSP AXI MSI Interrupt detected. It gets de-asserted when there is + no more MSI interrupt pending. The interrupt is relevant to the + iMSI-RX - Integrated MSI Receiver (AXI bridge). + const: msi + - description: + Legacy A/B/C/D interrupt signal. Basically it's triggered by + receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message + from the downstream device. + pattern: "^int(a|b|c|d)$" + - description: + Error condition detected and a flag is set in the Root Error Status + register of the AER capability. It's asserted when the RC + internally generated an error or an error message is received by + the RC. + const: aer + - description: + PME message is received by the port. That means having the PME + status bit set in the Root Status register (the event is + supposed to be unmasked in the Root Control register). + const: pme + - description: + Hot-plug event is detected. That is a bit has been set in the + Slot Status register and the corresponding event is enabled in + the Slot Control register. + const: hp + - description: + Link Autonomous Bandwidth Status flag has been set in the Link + Status register (the event is supposed to be unmasked in the + Link Control register). + const: bw_au + - description: + Bandwidth Management Status flag has been set in the Link + Status register (the event is supposed to be unmasked in the + Link Control register). + const: bw_mg + - description: + Vendor-specific IRQ names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native "app" IRQ for details + enum: [ intr ] + allOf: + - contains: + const: msi clocks: true @@ -70,6 +153,7 @@ examples: bus-range = <0x0 0xff>; interrupts = <25>, <24>; + interrupt-names = "msi", "hp"; #interrupt-cells = <1>; reset-gpios = <&port0 0 1>; -- 2.7.4