From 35479c22ff2159387f93b368c5d416ddc1cc437d Mon Sep 17 00:00:00 2001 From: x00270170 Date: Tue, 3 Jul 2018 15:06:27 +0800 Subject: [PATCH] mmc: dw_mmc: fix card threshold control configuration commit 7a6b9f4d601dfce8cb68f0dcfd834270280e31e6 upstream. Card write threshold control is supposed to be set since controller version 2.80a for data write in HS400 mode and data read in HS200/HS400/SDR104 mode. However the current code returns without configuring it in the case of data writing in HS400 mode. Meanwhile the patch fixes that the current code goes to 'disable' when doing data reading in HS400 mode. Fixes: 7e4bf1bc9543 ("mmc: dw_mmc: add the card write threshold for HS400 mode") Signed-off-by: Qing Xia Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/dw_mmc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index d382dbd..1a1501f 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -981,8 +981,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data) * It's used when HS400 mode is enabled. */ if (data->flags & MMC_DATA_WRITE && - !(host->timing != MMC_TIMING_MMC_HS400)) - return; + host->timing != MMC_TIMING_MMC_HS400) + goto disable; if (data->flags & MMC_DATA_WRITE) enable = SDMMC_CARD_WR_THR_EN; @@ -990,7 +990,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data) enable = SDMMC_CARD_RD_THR_EN; if (host->timing != MMC_TIMING_MMC_HS200 && - host->timing != MMC_TIMING_UHS_SDR104) + host->timing != MMC_TIMING_UHS_SDR104 && + host->timing != MMC_TIMING_MMC_HS400) goto disable; blksz_depth = blksz / (1 << host->data_shift); -- 2.7.4