From 35070674f488eefaeb753a13df11199d10328ff8 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 26 May 2023 09:27:16 +0200 Subject: [PATCH] Revert "dt-bindings: bridge: samsung-dsim: Make some flags optional" This reverts commit cfaf76d349837f695c8aa6d7077847fec4231fe5 which was applied without review due to a bad tool manipulation. Acked-by: Conor Dooley Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230526-revert-bad-binding-v1-1-67329ad1bd80@linaro.org --- .../devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml index 360fea8..9f61ebd 100644 --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml @@ -70,9 +70,7 @@ properties: samsung,burst-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 description: - DSIM high speed burst mode frequency when connected to devices - that support burst mode. If absent, the driver will use the pixel - clock from the attached device or bridge. + DSIM high speed burst mode frequency. samsung,esc-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 @@ -82,8 +80,7 @@ properties: samsung,pll-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 description: - DSIM oscillator clock frequency. If absent, the driver will - use the clock frequency of sclk_mipi. + DSIM oscillator clock frequency. phys: maxItems: 1 @@ -137,7 +134,9 @@ required: - compatible - interrupts - reg + - samsung,burst-clock-frequency - samsung,esc-clock-frequency + - samsung,pll-clock-frequency allOf: - $ref: ../dsi-controller.yaml# -- 2.7.4