From 3503376d6cc385b6266f93c24ead9a33d8dfe8cb Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 22 Jan 2021 00:23:20 +0800 Subject: [PATCH] arm64: dts: rockchip: Move ep-gpios property to nanopc-t4 from nanopi4 Only the NanoPC T4 hs the PCIe reset pin routed to the SoC. For the NanoPi M4 family, no such signal is routed to the expansion header on the base board. As the schematics for the expansion board were not released, it is unclear how this is handled, but the likely answer is that the signal is always pulled high. Move the ep-gpios property from the common nanopi4.dtsi file to the board level nanopc-t4.dts file. This makes the nanopi-m4 lack ep-gpios, matching the board design. A companion patch "PCI: rockchip: make ep_gpio optional" for the Linux driver is required, as the driver currently requires the property to be present. Fixes: e7a095908227 ("arm64: dts: rockchip: Add devicetree for NanoPC-T4") Reviewed-by: Robin Murphy Signed-off-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20210121162321.4538-4-wens@kernel.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts | 1 + arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index e0d7561..452728b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -95,6 +95,7 @@ }; &pcie0 { + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; vpcie3v3-supply = <&vcc3v3_sys>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 76a8b40..48ed4aa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -504,7 +504,6 @@ }; &pcie0 { - ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; max-link-speed = <2>; num-lanes = <2>; vpcie0v9-supply = <&vcca0v9_s3>; -- 2.7.4