From 347ea32dc118326c4f2636928239a29d192cc9b8 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 26 Nov 2015 14:00:48 +0200 Subject: [PATCH] mmc: sdhci: Fix DMA descriptor with zero data length SDHCI has built-in DMA called ADMA2. ADMA2 uses a descriptor table to define DMA scatter-gather. Each desciptor can specify a data length up to 65536 bytes, however the length field is only 16-bits so zero means 65536. Consequently, putting zero when the size is zero must not be allowed. This patch fixes one case where zero data length could be set inadvertently. The problem happens because unaligned data gets split and the code did not consider that the remaining aligned portion might be zero length. That case really only happens for SDIO because SD and eMMC cards transfer blocks that are invariably sector- aligned. For SDIO, access to function registers is done by data transfer (CMD53) when the register is bigger than 1 byte. Generally registers are 4 bytes but 2-byte registers are possible. So DMA of 4 bytes or less can happen. When 32-bit DMA is used, the data alignment must be 4, so 4-byte transfers won't casue a problem, but a 2-byte transfer could. However with the introduction of 64-bit DMA, the data alignment for 64-bit DMA was made 8 bytes, so all 4-byte transfers not on 8-byte boundaries get "split" into a 4-byte chunk and a 0-byte chunk, thereby hitting the bug. In fact, a closer look at the SDHCI specs indicates that only the descriptor table requires 8-byte alignment for 64-bit DMA. That will be dealt with in a separate patch, but the potential for a 2-byte access remains, so this fix is needed anyway. Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 4cfb261..8df0ba0 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -540,9 +540,12 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, BUG_ON(len > 65536); - /* tran, valid */ - sdhci_adma_write_desc(host, desc, addr, len, ADMA2_TRAN_VALID); - desc += host->desc_sz; + if (len) { + /* tran, valid */ + sdhci_adma_write_desc(host, desc, addr, len, + ADMA2_TRAN_VALID); + desc += host->desc_sz; + } /* * If this triggers then we have a calculation bug -- 2.7.4