From 345b1d3b46fa1b7b2bf5d27bef6ea4c4dbf08731 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Tue, 27 Jul 2010 10:41:53 +0800 Subject: [PATCH] mtd: denali.c: fixed all open brace { check-patch errors Signed-off-by: Chuanxiao Dong Signed-off-by: David Woodhouse --- drivers/mtd/nand/denali.c | 164 ++++++++++++++-------------------------------- 1 file changed, 48 insertions(+), 116 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index ca02838..f850a65 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -211,9 +211,7 @@ static void reset_bank(struct denali_nand_info *denali) irq_status = wait_for_irq(denali, irq_mask); if (irq_status & operation_timeout[denali->flash_bank]) - { printk(KERN_ERR "reset bank failed.\n"); - } } /* Reset the flash controller */ @@ -637,14 +635,12 @@ static void find_valid_banks(struct denali_nand_info *denali) } } - if (denali->platform == INTEL_CE4100) - { + if (denali->platform == INTEL_CE4100) { /* Platform limitations of the CE4100 device limit * users to a single chip solution for NAND. * Multichip support is not enabled. */ - if (denali->total_used_banks != 1) - { + if (denali->total_used_banks != 1) { printk(KERN_ERR "Sorry, Intel CE4100 only supports " "a single NAND device.\n"); BUG(); @@ -888,9 +884,7 @@ static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali) * with a specific ONFI mode, we apply those changes here. */ if (onfi_timing_mode != NAND_DEFAULT_TIMINGS) - { NAND_ONFi_Timing_Mode(denali, onfi_timing_mode); - } return status; } @@ -997,9 +991,7 @@ static void print_irq_log(struct denali_nand_info *denali) printk("ISR debug log index = %X\n", denali->idx); for (i = 0; i < 32; i++) - { printk("%08X: %08X\n", i, denali->irq_debug_array[i]); - } } #endif @@ -1018,12 +1010,10 @@ static irqreturn_t denali_isr(int irq, void *dev_id) /* check to see if a valid NAND chip has * been selected. */ - if (is_flash_bank_valid(denali->flash_bank)) - { + if (is_flash_bank_valid(denali->flash_bank)) { /* check to see if controller generated * the interrupt, since this is a shared interrupt */ - if ((irq_status = denali_irq_detected(denali)) != 0) - { + if ((irq_status = denali_irq_detected(denali)) != 0) { #if DEBUG_DENALI denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status; denali->idx %= 32; @@ -1054,8 +1044,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) bool retry = false; unsigned long timeout = msecs_to_jiffies(1000); - do - { + do { #if DEBUG_DENALI printk("waiting for 0x%x\n", irq_mask); #endif @@ -1068,8 +1057,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) denali->idx %= 32; #endif - if (intr_status & irq_mask) - { + if (intr_status & irq_mask) { denali->irq_status &= ~irq_mask; spin_unlock_irq(&denali->irq_lock); #if DEBUG_DENALI @@ -1077,9 +1065,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) #endif /* our interrupt was detected */ break; - } - else - { + } else { /* these are not the interrupts you are looking for - * need to wait again */ spin_unlock_irq(&denali->irq_lock); @@ -1092,8 +1078,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) } } while (comp_res != 0); - if (comp_res == 0) - { + if (comp_res == 0) { /* timeout */ printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n", intr_status, irq_mask); @@ -1149,22 +1134,17 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en addr = BANK(denali->flash_bank) | denali->page; - if (op == DENALI_WRITE && access_type != SPARE_ACCESS) - { + if (op == DENALI_WRITE && access_type != SPARE_ACCESS) { cmd = MODE_01 | addr; denali_write32(cmd, denali->flash_mem); - } - else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) - { + } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) { /* read spare area */ cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, access_type); cmd = MODE_01 | addr; denali_write32(cmd, denali->flash_mem); - } - else if (op == DENALI_READ) - { + } else if (op == DENALI_READ) { /* setup page read request for access type */ cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, access_type); @@ -1173,13 +1153,10 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en use the pipeline commands in Spare area only mode. So we don't. */ - if (access_type == SPARE_ACCESS) - { + if (access_type == SPARE_ACCESS) { cmd = MODE_01 | addr; denali_write32(cmd, denali->flash_mem); - } - else - { + } else { index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count); /* wait for command to be accepted @@ -1187,14 +1164,11 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en * bank. */ irq_status = wait_for_irq(denali, irq_mask); - if (irq_status == 0) - { + if (irq_status == 0) { printk(KERN_ERR "cmd, page, addr on timeout " "(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr); status = FAIL; - } - else - { + } else { cmd = MODE_01 | addr; denali_write32(cmd, denali->flash_mem); } @@ -1216,9 +1190,7 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_ /* write the data to the flash memory */ buf32 = (uint32_t *)buf; for (i = 0; i < len / 4; i++) - { denali_write32(*buf32++, denali->flash_mem + 0x10); - } return i*4; /* intent is to return the number of bytes read */ } @@ -1241,9 +1213,7 @@ static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *bu /* transfer the data from the flash */ buf32 = (uint32_t *)buf; for (i = 0; i < len / 4; i++) - { *buf32++ = ioread32(denali->flash_mem + 0x10); - } return i*4; /* intent is to return the number of bytes read */ } @@ -1259,8 +1229,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) denali->page = page; if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS, - DENALI_WRITE) == PASS) - { + DENALI_WRITE) == PASS) { write_data_to_flash_mem(denali, buf, mtd->oobsize); #if DEBUG_DENALI @@ -1274,14 +1243,11 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); - if (irq_status == 0) - { + if (irq_status == 0) { printk(KERN_ERR "OOB write failed\n"); status = -EIO; } - } - else - { + } else { printk(KERN_ERR "unable to send pipeline command\n"); status = -EIO; } @@ -1300,8 +1266,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) printk("read_oob %d\n", page); #endif if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, - DENALI_READ) == PASS) - { + DENALI_READ) == PASS) { read_data_from_flash_mem(denali, buf, mtd->oobsize); /* wait for command to be accepted @@ -1310,9 +1275,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) - { printk(KERN_ERR "page on OOB timeout %d\n", denali->page); - } /* We set the device back to MAIN_ACCESS here as I observed * instability with the controller if you do a block erase @@ -1340,12 +1303,8 @@ bool is_erased(uint8_t *buf, int len) { int i = 0; for (i = 0; i < len; i++) - { if (buf[i] != 0xFF) - { return false; - } - } return true; } #define ECC_SECTOR_SIZE 512 @@ -1362,15 +1321,13 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, { bool check_erased_page = false; - if (irq_status & INTR_STATUS0__ECC_ERR) - { + if (irq_status & INTR_STATUS0__ECC_ERR) { /* read the ECC errors. we'll ignore them for now */ uint32_t err_address = 0, err_correction_info = 0; uint32_t err_byte = 0, err_sector = 0, err_device = 0; uint32_t err_correction_value = 0; - do - { + do { err_address = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS); err_sector = ECC_SECTOR(err_address); @@ -1383,29 +1340,23 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, ECC_CORRECTION_VALUE(err_correction_info); err_device = ECC_ERR_DEVICE(err_correction_info); - if (ECC_ERROR_CORRECTABLE(err_correction_info)) - { + if (ECC_ERROR_CORRECTABLE(err_correction_info)) { /* offset in our buffer is computed as: sector number * sector size + offset in sector */ int offset = err_sector * ECC_SECTOR_SIZE + err_byte; - if (offset < denali->mtd.writesize) - { + if (offset < denali->mtd.writesize) { /* correct the ECC error */ buf[offset] ^= err_correction_value; denali->mtd.ecc_stats.corrected++; - } - else - { + } else { /* bummer, couldn't correct the error */ printk(KERN_ERR "ECC offset invalid\n"); denali->mtd.ecc_stats.failed++; } - } - else - { + } else { /* if the error is not correctable, need to * look at the page to see if it is an erased page. * if so, then it's not a real ECC error */ @@ -1482,8 +1433,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, /* copy buffer into DMA buffer */ memcpy(denali->buf.buf, buf, mtd->writesize); - if (raw_xfer) - { + if (raw_xfer) { /* transfer the data to the spare area */ memcpy(denali->buf.buf + mtd->writesize, chip->oob_poi, @@ -1500,8 +1450,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); - if (irq_status == 0) - { + if (irq_status == 0) { printk(KERN_ERR "timeout on write_page (type = %d)\n", raw_xfer); denali->status = (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL : @@ -1584,21 +1533,15 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status); denali_enable_dma(denali, false); - if (check_erased_page) - { + if (check_erased_page) { read_oob_data(&denali->mtd, chip->oob_poi, denali->page); /* check ECC failures that may have occurred on erased pages */ - if (check_erased_page) - { + if (check_erased_page) { if (!is_erased(buf, denali->mtd.writesize)) - { denali->mtd.ecc_stats.failed++; - } if (!is_erased(buf, denali->mtd.oobsize)) - { denali->mtd.ecc_stats.failed++; - } } } return 0; @@ -1643,9 +1586,7 @@ static uint8_t denali_read_byte(struct mtd_info *mtd) uint8_t result = 0xff; if (denali->buf.head < denali->buf.tail) - { result = denali->buf.buf[denali->buf.head++]; - } #if DEBUG_DENALI printk("read byte -> 0x%02x\n", result); @@ -1708,8 +1649,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, #if DEBUG_DENALI printk("cmdfunc: 0x%x %d %d\n", cmd, col, page); #endif - switch (cmd) - { + switch (cmd) { case NAND_CMD_PAGEPROG: break; case NAND_CMD_STATUS: @@ -1717,8 +1657,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, break; case NAND_CMD_READID: reset_buf(denali); - if (denali->flash_bank < denali->total_used_banks) - { + if (denali->flash_bank < denali->total_used_banks) { /* write manufacturer information into nand buffer for NAND subsystem to fetch. */ @@ -1727,9 +1666,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, write_byte_to_buf(denali, denali->dev_info.bDeviceParam0); write_byte_to_buf(denali, denali->dev_info.bDeviceParam1); write_byte_to_buf(denali, denali->dev_info.bDeviceParam2); - } - else - { + } else { int i; for (i = 0; i < 5; i++) write_byte_to_buf(denali, 0xff); @@ -1796,20 +1733,24 @@ static void denali_hw_init(struct denali_nand_info *denali) static struct nand_ecclayout nand_oob_slc = { .eccbytes = 4, .eccpos = { 0, 1, 2, 3 }, /* not used */ - .oobfree = {{ + .oobfree = { + { .offset = ECC_BYTES_SLC, .length = 64 - ECC_BYTES_SLC - }} + } + } }; #define ECC_BYTES_MLC 14 * (2048 / ECC_SECTOR_SIZE) static struct nand_ecclayout nand_oob_mlc_14bit = { .eccbytes = 14, .eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */ - .oobfree = {{ + .oobfree = { + { .offset = ECC_BYTES_MLC, .length = 64 - ECC_BYTES_MLC - }} + } + } }; static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; @@ -1882,8 +1823,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Due to a silicon limitation, we can only support * ONFI timing mode 1 and below. */ - if (onfi_timing_mode < -1 || onfi_timing_mode > 1) - { + if (onfi_timing_mode < -1 || onfi_timing_mode > 1) { printk("Intel CE4100 only supports ONFI timing mode 1 " "or below\n"); ret = -EINVAL; @@ -1912,16 +1852,14 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Is 32-bit DMA supported? */ ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32)); - if (ret) - { + if (ret) { printk(KERN_ERR "Spectra: no usable DMA configuration\n"); goto failed_enable; } denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE, PCI_DMA_BIDIRECTIONAL); - if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) - { + if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) { printk(KERN_ERR "Spectra: failed to map DMA buffer\n"); goto failed_enable; } @@ -1978,8 +1916,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* MTD supported page sizes vary by kernel. We validate our * kernel supports the device here. */ - if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) - { + if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) { ret = -ENODEV; printk(KERN_ERR "Spectra: device size not supported by this " "version of MTD."); @@ -2011,8 +1948,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* scan for NAND devices attached to the controller * this is the first stage in a two step process to register * with the nand subsystem */ - if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) - { + if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) { ret = -ENXIO; goto failed_nand; } @@ -2029,13 +1965,10 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN; denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME; - if (denali->dev_info.MLCDevice) - { + if (denali->dev_info.MLCDevice) { denali->nand.ecc.layout = &nand_oob_mlc_14bit; denali->nand.ecc.bytes = ECC_BYTES_MLC; - } - else /* SLC */ - { + } else {/* SLC */ denali->nand.ecc.layout = &nand_oob_slc; denali->nand.ecc.bytes = ECC_BYTES_SLC; } @@ -2057,8 +1990,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->nand.ecc.write_oob = denali_write_oob; denali->nand.erase_cmd = denali_erase; - if (nand_scan_tail(&denali->mtd)) - { + if (nand_scan_tail(&denali->mtd)) { ret = -ENXIO; goto failed_nand; } -- 2.7.4