From 341afbc9ea3983a2261c9e495e0b66b36b5dda20 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Wed, 11 Sep 2019 19:47:12 +0200 Subject: [PATCH] ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo See DM3730,DM275 data sheet (SPRS685B) footnote (6) in Table 4-19 which says that ABB must be switched to FBB mode when using the OPP1G. The LOD definition abb_mpu_iva already exists so that we need to add plumbing for vbb-supply = <&abb_mpu_iva> and define two voltage vectors for each OPP so that the abb LDO is also updated by the ti-cpufreq driver. We also must switch the ti_cpufreq_soc_data to multi_regulator. Note: reading out the abb reglator voltage to verify that it does do transitions can be done by cat /sys/devices/platform/68000000.ocp/483072f0.regulator-abb-mpu/regulator/regulator.*/microvolts Likewise, read the twl4030 provided VDD voltage by cat /sys/devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:regulator-vdd1/regulator/regulator.*/microvolts Note: to check if the ABB FBB is enabled/disabled, check registers PRM_LDO_ABB_CTRL 0x483072F4 bit 3:0 1=bypass 5=FBB PRM_LDO_ABB_SETUP 0x483072F0 0x00=bypass 0x11=FBB e.g. /dev/mem opened. Memory mapped at address 0xb6fe4000. Value at address 0x483072F4 (0xb6fe42f4): 0x3205 /dev/mem opened. Memory mapped at address 0xb6f89000. Value at address 0x483072F4 (0xb6f892f4): 0x3201 Note: omap34xx and am3517 have/need no comparable LDO or mechanism. Suggested-by: Adam Ford Signed-off-by: H. Nikolaus Schaller Acked-by: Tony Lindgren Tested-by: Adam Ford Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/omap36xx.dtsi | 21 ++++++++++++++++----- drivers/cpufreq/ti-cpufreq.c | 2 +- 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 2fcd0c5..c618cb2 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -23,6 +23,7 @@ cpu: cpu@0 { operating-points-v2 = <&cpu0_opp_table>; + vbb-supply = <&abb_mpu_iva>; clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; @@ -37,9 +38,11 @@ /* * we currently only select the max voltage from table * Table 4-19 of the DM3730 Data sheet (SPRS685B) - * Format is: + * Format is: cpu0-supply: + * vbb-supply: */ - opp-microvolt = <1012500 1012500 1012500>; + opp-microvolt = <1012500 1012500 1012500>, + <1012500 1012500 1012500>; /* * first value is silicon revision bit mask * second one is "speed binned" bit mask @@ -50,25 +53,33 @@ opp100-600000000 { opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1200000 1200000>; + opp-microvolt = <1200000 1200000 1200000>, + <1200000 1200000 1200000>; opp-supported-hw = <0xffffffff 3>; }; opp130-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1325000 1325000 1325000>; + opp-microvolt = <1325000 1325000 1325000>, + <1325000 1325000 1325000>; opp-supported-hw = <0xffffffff 3>; }; opp1g-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1375000 1375000 1375000>; + opp-microvolt = <1375000 1375000 1375000>, + <1375000 1375000 1375000>; /* only on am/dm37x with speed-binned bit set */ opp-supported-hw = <0xffffffff 2>; turbo-mode; }; }; + opp_supply_mpu_iva: opp_supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; + }; + ocp@68000000 { uart4: serial@49042000 { compatible = "ti,omap3-uart"; diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index a161098..c7e5d3d 100644 --- a/drivers/cpufreq/ti-cpufreq.c +++ b/drivers/cpufreq/ti-cpufreq.c @@ -175,7 +175,7 @@ static struct ti_cpufreq_soc_data omap36xx_soc_data = { .efuse_shift = 9, .efuse_mask = BIT(9), .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, - .multi_regulator = false, + .multi_regulator = true, }; /** -- 2.7.4