From 33b64eb2b1b1759cbdafbe5c59df652f1e7c746e Mon Sep 17 00:00:00 2001 From: Luis Carlos Cobo Date: Sat, 23 Feb 2008 15:17:10 +0100 Subject: [PATCH] mac80211: support for mesh interfaces in mac80211 data path This changes the TX/RX paths in mac80211 to support mesh interfaces. This code will be cleaned up later again before being enabled. Signed-off-by: Luis Carlos Cobo Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/rx.c | 121 +++++++++++++++++++++++++++++++++++++++-- net/mac80211/tx.c | 158 ++++++++++++++++++++++++++++++++++++++++++++---------- 2 files changed, 246 insertions(+), 33 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index b7eeae0..cc4a896 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -20,6 +20,9 @@ #include "ieee80211_i.h" #include "ieee80211_led.h" +#ifdef CONFIG_MAC80211_MESH +#include "mesh.h" +#endif #include "wep.h" #include "wpa.h" #include "tkip.h" @@ -390,10 +393,60 @@ ieee80211_rx_h_passive_scan(struct ieee80211_txrx_data *rx) return RX_CONTINUE; } +#ifdef CONFIG_MAC80211_MESH +#define msh_h_get(h, l) ((struct ieee80211s_hdr *) ((u8 *)h + l)) +static ieee80211_rx_result +ieee80211_rx_mesh_check(struct ieee80211_txrx_data *rx) +{ + int hdrlen = ieee80211_get_hdrlen(rx->fc); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data; + if ((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) { + if (!((rx->fc & IEEE80211_FCTL_FROMDS) && + (rx->fc & IEEE80211_FCTL_TODS))) + return RX_DROP_MONITOR; + if (memcmp(hdr->addr4, rx->dev->dev_addr, ETH_ALEN) == 0) + return RX_DROP_MONITOR; + } + + /* If there is not an established peer link and this is not a peer link + * establisment frame, beacon or probe, drop the frame. + */ + + if (!rx->sta || rx->sta->plink_state != ESTAB) { + struct ieee80211_mgmt *mgmt; + if ((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT) + return RX_DROP_MONITOR; + + switch (rx->fc & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_ACTION: + mgmt = (struct ieee80211_mgmt *)hdr; + if (mgmt->u.action.category != PLINK_CATEGORY) + return RX_DROP_MONITOR; + /* fall through on else */ + case IEEE80211_STYPE_PROBE_REQ: + case IEEE80211_STYPE_PROBE_RESP: + case IEEE80211_STYPE_BEACON: + return RX_CONTINUE; + break; + default: + return RX_DROP_MONITOR; + } + + } else if ((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA && + is_broadcast_ether_addr(hdr->addr1) && + mesh_rmc_check(hdr->addr4, msh_h_get(hdr, hdrlen), rx->dev)) + return RX_DROP_MONITOR; + else + return RX_CONTINUE; +} +#endif + + static ieee80211_rx_result ieee80211_rx_h_check(struct ieee80211_txrx_data *rx) { struct ieee80211_hdr *hdr; + hdr = (struct ieee80211_hdr *) rx->skb->data; /* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */ @@ -423,6 +476,12 @@ ieee80211_rx_h_check(struct ieee80211_txrx_data *rx) * deauth/disassoc frames when needed. In addition, hostapd is * responsible for filtering on both auth and assoc states. */ + +#ifdef CONFIG_MAC80211_MESH + if (rx->sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) + return ieee80211_rx_mesh_check(rx); +#endif + if (unlikely(((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA || ((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL && (rx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PSPOLL)) && @@ -657,6 +716,8 @@ ieee80211_rx_h_sta_process(struct ieee80211_txrx_data *rx) /* Update last_rx only for unicast frames in order to prevent * the Probe Request frames (the only broadcast frames from a * STA in infrastructure mode) from keeping a connection alive. + * Mesh beacons will update last_rx when if they are found to + * match the current local configuration when processed. */ sta->last_rx = jiffies; } @@ -1050,6 +1111,23 @@ ieee80211_data_to_8023(struct ieee80211_txrx_data *rx) hdrlen = ieee80211_get_hdrlen(fc); +#ifdef CONFIG_MAC80211_MESH + if (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) { + int meshhdrlen = ieee80211_get_mesh_hdrlen( + (struct ieee80211s_hdr *) (skb->data + hdrlen)); + /* Copy on cb: + * - mesh header: to be used for mesh forwarding + * decision. It will also be used as mesh header template at + * tx.c:ieee80211_subif_start_xmit() if interface + * type is mesh and skb->pkt_type == PACKET_OTHERHOST + * - ta: to be used if a RERR needs to be sent. + */ + memcpy(skb->cb, skb->data + hdrlen, meshhdrlen); + memcpy(MESH_PREQ(skb), hdr->addr2, ETH_ALEN); + hdrlen += meshhdrlen; + } +#endif + /* convert IEEE 802.11 header + possible LLC headers into Ethernet * header * IEEE 802.11 address fields: @@ -1083,9 +1161,10 @@ ieee80211_data_to_8023(struct ieee80211_txrx_data *rx) memcpy(dst, hdr->addr3, ETH_ALEN); memcpy(src, hdr->addr4, ETH_ALEN); - if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS)) { - if (net_ratelimit()) - printk(KERN_DEBUG "%s: dropped FromDS&ToDS " + if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS && + sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)) { + if (net_ratelimit()) + printk(KERN_DEBUG "%s: dropped FromDS&ToDS " "frame (RA=%s TA=%s DA=%s SA=%s)\n", rx->dev->name, print_mac(mac, hdr->addr1), @@ -1227,6 +1306,39 @@ ieee80211_deliver_skb(struct ieee80211_txrx_data *rx) } } +#ifdef CONFIG_MAC80211_MESH + /* Mesh forwarding */ + if (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) { + u8 *mesh_ttl = &((struct ieee80211s_hdr *)skb->cb)->ttl; + (*mesh_ttl)--; + + if (is_multicast_ether_addr(skb->data)) { + if (*mesh_ttl > 0) { + xmit_skb = skb_copy(skb, GFP_ATOMIC); + if (!xmit_skb && net_ratelimit()) + printk(KERN_DEBUG "%s: failed to clone " + "multicast frame\n", dev->name); + else + xmit_skb->pkt_type = PACKET_OTHERHOST; + } else + sdata->u.sta.mshstats.dropped_frames_ttl++; + + } else if (skb->pkt_type != PACKET_OTHERHOST && + compare_ether_addr(dev->dev_addr, skb->data) != 0) { + if (*mesh_ttl == 0) { + sdata->u.sta.mshstats.dropped_frames_ttl++; + dev_kfree_skb(skb); + skb = NULL; + } else { + xmit_skb = skb; + xmit_skb->pkt_type = PACKET_OTHERHOST; + if (!(dev->flags & IFF_PROMISC)) + skb = NULL; + } + } + } +#endif + if (skb) { /* deliver to local stack */ skb->protocol = eth_type_trans(skb, dev); @@ -1444,7 +1556,8 @@ ieee80211_rx_h_mgmt(struct ieee80211_txrx_data *rx) sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev); if ((sdata->vif.type == IEEE80211_IF_TYPE_STA || - sdata->vif.type == IEEE80211_IF_TYPE_IBSS) && + sdata->vif.type == IEEE80211_IF_TYPE_IBSS || + sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) && !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME)) ieee80211_sta_rx_mgmt(rx->dev, rx->skb, rx->u.rx.status); else diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 1cd58e0..fc1ffb5 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -26,6 +26,9 @@ #include "ieee80211_i.h" #include "ieee80211_led.h" +#ifdef CONFIG_MAC80211_MESH +#include "mesh.h" +#endif #include "wep.h" #include "wpa.h" #include "wme.h" @@ -249,6 +252,9 @@ ieee80211_tx_h_check_assoc(struct ieee80211_txrx_data *tx) (tx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_PROBE_REQ)) return TX_DROP; + if (tx->sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) + return TX_CONTINUE; + if (tx->flags & IEEE80211_TXRXD_TXPS_BUFFERED) return TX_CONTINUE; @@ -1384,8 +1390,9 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, struct ieee80211_tx_packet_data *pkt_data; struct ieee80211_sub_if_data *sdata; int ret = 1, head_need; - u16 ethertype, hdrlen, fc; + u16 ethertype, hdrlen, meshhdrlen = 0, fc; struct ieee80211_hdr hdr; + struct ieee80211s_hdr mesh_hdr; const u8 *encaps_data; int encaps_len, skip_header_bytes; int nh_pos, h_pos; @@ -1427,6 +1434,37 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); hdrlen = 30; break; +#ifdef CONFIG_MAC80211_MESH + case IEEE80211_IF_TYPE_MESH_POINT: + fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS; + /* RA TA DA SA */ + if (is_multicast_ether_addr(skb->data)) + memcpy(hdr.addr1, skb->data, ETH_ALEN); + else if (mesh_nexthop_lookup(hdr.addr1, skb, dev)) + return 0; + memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); + memcpy(hdr.addr3, skb->data, ETH_ALEN); + memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); + if (skb->pkt_type == PACKET_OTHERHOST) { + /* Forwarded frame, keep mesh ttl and seqnum */ + struct ieee80211s_hdr *prev_meshhdr; + prev_meshhdr = ((struct ieee80211s_hdr *)skb->cb); + meshhdrlen = ieee80211_get_mesh_hdrlen(prev_meshhdr); + memcpy(&mesh_hdr, prev_meshhdr, meshhdrlen); + sdata->u.sta.mshstats.fwded_frames++; + } else { + if (!sdata->u.sta.mshcfg.dot11MeshTTL) { + /* Do not send frames with mesh_ttl == 0 */ + sdata->u.sta.mshstats.dropped_frames_ttl++; + ret = 0; + goto fail; + } + meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, + sdata); + } + hdrlen = 30; + break; +#endif case IEEE80211_IF_TYPE_STA: fc |= IEEE80211_FCTL_TODS; /* BSSID SA DA */ @@ -1471,8 +1509,8 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, * EAPOL frames from the local station. */ if (unlikely(!is_multicast_ether_addr(hdr.addr1) && - !(sta_flags & WLAN_STA_AUTHORIZED) && - !(ethertype == ETH_P_PAE && + !(sta_flags & WLAN_STA_AUTHORIZED) && + !(ethertype == ETH_P_PAE && compare_ether_addr(dev->dev_addr, skb->data + ETH_ALEN) == 0))) { #ifdef CONFIG_MAC80211_VERBOSE_DEBUG @@ -1525,7 +1563,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, * build in headroom in __dev_alloc_skb() (linux/skbuff.h) and * alloc_skb() (net/core/skbuff.c) */ - head_need = hdrlen + encaps_len + local->tx_headroom; + head_need = hdrlen + encaps_len + meshhdrlen + local->tx_headroom; head_need -= skb_headroom(skb); /* We are going to modify skb data, so make a copy of it if happens to @@ -1559,6 +1597,12 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, h_pos += encaps_len; } + if (meshhdrlen > 0) { + memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen); + nh_pos += meshhdrlen; + h_pos += meshhdrlen; + } + if (fc & IEEE80211_STYPE_QOS_DATA) { __le16 *qos_control; @@ -1734,6 +1778,40 @@ static void ieee80211_beacon_add_tim(struct ieee80211_local *local, read_unlock_bh(&local->sta_lock); } +#ifdef CONFIG_MAC80211_MESH +static struct sk_buff *ieee80211_mesh_beacon_get(struct net_device *dev) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); + struct ieee80211_mgmt *mgmt; + u8 *pos; + + if (!skb) + return NULL; + skb_reserve(skb, local->hw.extra_tx_headroom); + mgmt = (struct ieee80211_mgmt *) + skb_put(skb, 24 + sizeof(mgmt->u.beacon)); + memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon)); + mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT, + IEEE80211_STYPE_BEACON); + memset(mgmt->da, 0xff, ETH_ALEN); + memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN); + /* BSSID is left zeroed, wildcard value */ + mgmt->u.beacon.beacon_int = + cpu_to_le16(local->hw.conf.beacon_int); + mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */ + + pos = skb_put(skb, 2); + *pos++ = WLAN_EID_SSID; + *pos++ = 0x0; + + mesh_mgmt_ies_add(skb, dev); + + return skb; +} +#endif + + struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_tx_control *control) @@ -1746,6 +1824,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, struct rate_selection rsel; struct beacon_data *beacon; struct ieee80211_supported_band *sband; + int *num_beacons; + int err = 0; sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; @@ -1753,11 +1833,51 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, sdata = vif_to_sdata(vif); bdev = sdata->dev; - ap = &sdata->u.ap; - beacon = rcu_dereference(ap->beacon); + switch (sdata->vif.type) { + case IEEE80211_IF_TYPE_AP: + ap = &sdata->u.ap; + beacon = rcu_dereference(ap->beacon); + if (!ap || !beacon) { + err = -1; + break; + } + + /* headroom, head length, tail length and maximum TIM length */ + skb = dev_alloc_skb(local->tx_headroom + beacon->head_len + + beacon->tail_len + 256); + if (!skb) + goto out; + + skb_reserve(skb, local->tx_headroom); + memcpy(skb_put(skb, beacon->head_len), beacon->head, + beacon->head_len); - if (!ap || sdata->vif.type != IEEE80211_IF_TYPE_AP || !beacon) { + ieee80211_include_sequence(sdata, + (struct ieee80211_hdr *)skb->data); + + ieee80211_beacon_add_tim(local, ap, skb, beacon); + + if (beacon->tail) + memcpy(skb_put(skb, beacon->tail_len), beacon->tail, + beacon->tail_len); + + num_beacons = &ap->num_beacons; + break; + +#ifdef CONFIG_MAC80211_MESH + case IEEE80211_IF_TYPE_MESH_POINT: + skb = ieee80211_mesh_beacon_get(bdev); + num_beacons = &sdata->u.sta.num_beacons; + break; +#endif + + default: + err = -1; + break; + } + + if (err) { #ifdef CONFIG_MAC80211_VERBOSE_DEBUG if (net_ratelimit()) printk(KERN_DEBUG "no beacon data avail for %s\n", @@ -1767,24 +1887,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, goto out; } - /* headroom, head length, tail length and maximum TIM length */ - skb = dev_alloc_skb(local->tx_headroom + beacon->head_len + - beacon->tail_len + 256); - if (!skb) - goto out; - - skb_reserve(skb, local->tx_headroom); - memcpy(skb_put(skb, beacon->head_len), beacon->head, - beacon->head_len); - - ieee80211_include_sequence(sdata, (struct ieee80211_hdr *)skb->data); - - ieee80211_beacon_add_tim(local, ap, skb, beacon); - - if (beacon->tail) - memcpy(skb_put(skb, beacon->tail_len), beacon->tail, - beacon->tail_len); - if (control) { rate_control_get_rate(local->mdev, sband, skb, &rsel); if (!rsel.rate) { @@ -1808,10 +1910,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, control->retry_limit = 1; control->flags |= IEEE80211_TXCTL_CLEAR_PS_FILT; } - - ap->num_beacons++; - - out: + (*num_beacons)++; +out: rcu_read_unlock(); return skb; } -- 2.7.4