From 3336514381f9ef99c50e5337ae1bf36f8138679d Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Wed, 17 Feb 2016 16:12:19 -0800 Subject: [PATCH] i40e: add adminq commands for Rx CTL registers Add the new opcodes and struct used for asking the firmware to update Rx control registers that need extra care when being accessed while under heavy traffic - e.g. sustained 64byte packets at line rate on all ports. The firmware will take extra steps to be sure the register accesses are successful. The registers involved are: PFQF_CTL_0 PFQF_HENA PFQF_FDALLOC PFQF_HREGION PFLAN_QALLOC VPQF_CTL VFQF_HENA VFQF_HREGION VSIQF_CTL VSILAN_QBASE VSILAN_QTABLE VSIQF_TCREGION PFQF_HKEY VFQF_HKEY PRTQF_CTL_0 GLFCOE_RCTL GLFCOE_RSOF GLQF_CTL GLQF_SWAP GLQF_HASH_MSK GLQF_HASH_INSET GLQF_HSYM GLQF_FC_MSK GLQF_FC_INSET GLQF_FD_MSK PRTQF_FD_INSET PRTQF_FD_FLXINSET PRTQF_FD_MSK Change-ID: I56c8144000da66ad99f68948d8a184b2ec2aeb3e Signed-off-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 16 ++++++++++++++++ drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 16 ++++++++++++++++ 2 files changed, 32 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h index bb7ecbb..8d5c65a 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h +++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h @@ -146,6 +146,8 @@ enum i40e_admin_queue_opc { i40e_aqc_opc_set_port_parameters = 0x0203, i40e_aqc_opc_get_switch_resource_alloc = 0x0204, i40e_aqc_opc_set_switch_config = 0x0205, + i40e_aqc_opc_rx_ctl_reg_read = 0x0206, + i40e_aqc_opc_rx_ctl_reg_write = 0x0207, i40e_aqc_opc_add_vsi = 0x0210, i40e_aqc_opc_update_vsi_parameters = 0x0211, @@ -696,6 +698,20 @@ struct i40e_aqc_set_switch_config { I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config); +/* Read Receive control registers (direct 0x0206) + * Write Receive control registers (direct 0x0207) + * used for accessing Rx control registers that can be + * slow and need special handling when under high Rx load + */ +struct i40e_aqc_rx_ctl_reg_read_write { + __le32 reserved1; + __le32 address; + __le32 reserved2; + __le32 value; +}; + +I40E_CHECK_CMD_LENGTH(i40e_aqc_rx_ctl_reg_read_write); + /* Add VSI (indirect 0x0210) * this indirect command uses struct i40e_aqc_vsi_properties_data * as the indirect buffer (128 bytes) diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h index 815e481..aad8d62 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h @@ -146,6 +146,8 @@ enum i40e_admin_queue_opc { i40e_aqc_opc_set_port_parameters = 0x0203, i40e_aqc_opc_get_switch_resource_alloc = 0x0204, i40e_aqc_opc_set_switch_config = 0x0205, + i40e_aqc_opc_rx_ctl_reg_read = 0x0206, + i40e_aqc_opc_rx_ctl_reg_write = 0x0207, i40e_aqc_opc_add_vsi = 0x0210, i40e_aqc_opc_update_vsi_parameters = 0x0211, @@ -693,6 +695,20 @@ struct i40e_aqc_set_switch_config { I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config); +/* Read Receive control registers (direct 0x0206) + * Write Receive control registers (direct 0x0207) + * used for accessing Rx control registers that can be + * slow and need special handling when under high Rx load + */ +struct i40e_aqc_rx_ctl_reg_read_write { + __le32 reserved1; + __le32 address; + __le32 reserved2; + __le32 value; +}; + +I40E_CHECK_CMD_LENGTH(i40e_aqc_rx_ctl_reg_read_write); + /* Add VSI (indirect 0x0210) * this indirect command uses struct i40e_aqc_vsi_properties_data * as the indirect buffer (128 bytes) -- 2.7.4