From 33057e1672fe8111ea8124db3343e2bf9cd52de3 Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Fri, 25 May 2018 11:41:21 +0530 Subject: [PATCH] ARM: dts: ipq8074: Add pcie nodes The driver/phy support for ipq8074 is available now. So enabling the nodes in DT. Reviewed-by: Abhishek Sahu Acked-by: Bjorn Andersson Signed-off-by: Sricharan R Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 157 +++++++++++++++++++++++++++++++++- 1 file changed, 156 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index bd58ab4..1822698 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -24,7 +24,7 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - pinctrl@1000000 { + tlmm: pinctrl@1000000 { compatible = "qcom,ipq8074-pinctrl"; reg = <0x1000000 0x300000>; interrupts = ; @@ -278,6 +278,161 @@ pinctrl-names = "default"; status = "disabled"; }; + + pcie_phy0: phy@86000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x86000 0x1000>; + #phy-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe_clk"; + clock-output-names = "pcie20_phy0_pipe_clk"; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; + }; + + pcie0: pci@20000000 { + compatible = "qcom,pcie-ipq8074"; + reg = <0x20000000 0xf1d + 0x20000f20 0xa8 + 0x80000 0x2000 + 0x20100000 0x1000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy0>; + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x20200000 0x20200000 + 0 0x100000 /* downstream I/O */ + 0x82000000 0 0x20300000 0x20300000 + 0 0xd00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>; + + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux"; + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky"; + status = "disabled"; + }; + + pcie_phy1: phy@8e000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x8e000 0x1000>; + #phy-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "pipe_clk"; + clock-output-names = "pcie20_phy1_pipe_clk"; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; + }; + + pcie1: pci@10000000 { + compatible = "qcom,pcie-ipq8074"; + reg = <0x10000000 0xf1d + 0x10000f20 0xa8 + 0x88000 0x2000 + 0x10100000 0x1000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy1>; + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x10200000 0x10200000 + 0 0x100000 /* downstream I/O */ + 0x82000000 0 0x10300000 0x10300000 + 0 0xd00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, + <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux"; + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_SLEEP_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky"; + status = "disabled"; + }; }; cpus { -- 2.7.4