From 31a658b2afc7bff8a4d51418677b579d85060b31 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 9 Mar 2017 15:56:57 +0100 Subject: [PATCH] iwlwifi: mvm: fix some kernel-doc This mostly fixes missing tags/struct names, but also some other things. Lots of issues remain though. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h | 4 +- .../net/wireless/intel/iwlwifi/mvm/fw-api-power.h | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h | 7 +-- .../net/wireless/intel/iwlwifi/mvm/fw-api-scan.h | 32 +++++------ .../net/wireless/intel/iwlwifi/mvm/fw-api-sta.h | 22 ++++---- drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h | 17 +++--- drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h | 62 +++++++++++----------- 7 files changed, 78 insertions(+), 68 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h index 44419e8..89bc008 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h @@ -395,8 +395,8 @@ enum iwl_ucode_tlv_capa { #define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) #define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) -/* - * Calibration control struct. +/** + * struct iwl_tlv_calib_ctrl - Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h index 750510a..3d56ba4 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h @@ -411,7 +411,7 @@ struct iwl_geo_tx_power_profiles_cmd { * Threshold. Typical energy threshold is -72dBm. * @bf_temp_threshold: This threshold determines the type of temperature * filtering (Slow or Fast) that is selected (Units are in Celsuis): - * If the current temperature is above this threshold - Fast filter + * If the current temperature is above this threshold - Fast filter * will be used, If the current temperature is below this threshold - * Slow filter will be used. * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h index b530fa4..67dffd7 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h @@ -147,7 +147,8 @@ enum iwl_csum_rx_assist_info { /** * struct iwl_rx_mpdu_res_start - phy info - * @assist: see CSUM_RX_ASSIST_ above + * @byte_count: byte count of the frame + * @assist: see &enum iwl_csum_rx_assist_info */ struct iwl_rx_mpdu_res_start { __le16 byte_count; @@ -447,7 +448,7 @@ struct iwl_rxq_sync_notification { } __packed; /* MULTI_QUEUE_DRV_SYNC_HDR_CMD_API_S_VER_1 */ /** - * Internal message identifier + * enum iwl_mvm_rxq_notif_type - Internal message identifier * * @IWL_MVM_RXQ_EMPTY: empty sync notification * @IWL_MVM_RXQ_NOTIF_DEL_BA: notify RSS queues of delBA @@ -491,7 +492,7 @@ enum iwl_mvm_pm_event { /** * struct iwl_mvm_pm_state_notification - station PM state notification * @sta_id: station ID of the station changing state - * @type: the new powersave state, see IWL_MVM_PM_EVENT_ above + * @type: the new powersave state, see &enum iwl_mvm_pm_event */ struct iwl_mvm_pm_state_notification { u8 sta_id; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-scan.h index 3178eb9..dded91d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-scan.h @@ -7,7 +7,7 @@ * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * Copyright(c) 2016 Intel Deutschland GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -34,6 +34,7 @@ * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -111,7 +112,7 @@ enum scan_framework_client { }; /** - * iwl_scan_offload_blacklist - SCAN_OFFLOAD_BLACKLIST_S + * struct iwl_scan_offload_blacklist - SCAN_OFFLOAD_BLACKLIST_S * @ssid: MAC address to filter out * @reported_rssi: AP rssi reported to the host * @client_bitmap: clients ignore this entry - enum scan_framework_client @@ -135,7 +136,7 @@ enum iwl_scan_offload_band_selection { }; /** - * iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S + * struct iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S * @ssid_index: index to ssid list in fixed part * @unicast_cipher: encryption algorithm to match - bitmap * @aut_alg: authentication algorithm to match - bitmap @@ -154,8 +155,7 @@ struct iwl_scan_offload_profile { } __packed; /** - * iwl_scan_offload_profile_cfg - SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1 - * @blaclist: AP list to filter off from scan results + * struct iwl_scan_offload_profile_cfg - SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1 * @profiles: profiles to search for match * @blacklist_len: length of blacklist * @num_profiles: num of profiles in the list @@ -176,7 +176,7 @@ struct iwl_scan_offload_profile_cfg { } __packed; /** - * iwl_scan_schedule_lmac - schedule of scan offload + * struct iwl_scan_schedule_lmac - schedule of scan offload * @delay: delay between iterations, in seconds. * @iterations: num of scan iterations * @full_scan_mul: number of partial scans before each full scan @@ -200,7 +200,7 @@ enum iwl_scan_ebs_status { }; /** - * iwl_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S + * struct iwl_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S * @tx_flags: combination of TX_CMD_FLG_* * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is * cleared. Combination of RATE_MCS_* @@ -220,7 +220,7 @@ enum iwl_scan_channel_flags_lmac { }; /** - * iwl_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2 + * struct iwl_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2 * @flags: bits 1-20: directed scan to i'th ssid * other bits &enum iwl_scan_channel_flags_lmac * @channel_number: channel number 1-13 etc @@ -235,7 +235,7 @@ struct iwl_scan_channel_cfg_lmac { } __packed; /* - * iwl_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1 + * struct iwl_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1 * @offset: offset in the data block * @len: length of the segment */ @@ -263,7 +263,7 @@ enum iwl_scan_channel_flags { IWL_SCAN_CHANNEL_FLAG_CACHE_ADD = BIT(2), }; -/* iwl_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S +/* struct iwl_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S * @flags: enum iwl_scan_channel_flags * @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is * involved. @@ -276,7 +276,7 @@ struct iwl_scan_channel_opt { } __packed; /** - * iwl_mvm_lmac_scan_flags + * enum iwl_mvm_lmac_scan_flags - LMAC scan flags * @IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL: pass all beacons and probe responses * without filtering. * @IWL_MVM_LMAC_SCAN_FLAG_PASSIVE: force passive scan on all channels @@ -320,7 +320,7 @@ enum iwl_scan_priority_ext { }; /** - * iwl_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1 + * struct iwl_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1 * @reserved1: for alignment and future use * @channel_num: num of channels to scan * @active-dwell: dwell time for active channels @@ -410,7 +410,7 @@ struct iwl_lmac_scan_complete_notif { } __packed; /** - * iwl_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2 + * struct iwl_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2 * @last_schedule_line: last schedule line executed (fast or regular) * @last_schedule_iteration: last scan iteration executed before scan abort * @status: enum iwl_scan_offload_complete_status @@ -547,12 +547,12 @@ struct iwl_scan_config { } __packed; /* SCAN_CONFIG_DB_CMD_API_S_3 */ /** - * iwl_umac_scan_flags - *@IWL_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request + * enum iwl_umac_scan_flags - UMAC scan flags + * @IWL_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request * can be preempted by other scan requests with higher priority. * The low priority scan will be resumed when the higher proirity scan is * completed. - *@IWL_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver + * @IWL_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver * when scan starts. */ enum iwl_umac_scan_flags { diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h index 421b9dd..894b8f6 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h @@ -223,7 +223,7 @@ enum iwl_sta_sleep_flag { /** * struct iwl_mvm_keyinfo - key information - * @key_flags: type %iwl_sta_key_flag + * @key_flags: type &enum iwl_sta_key_flag * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx * @key_offset: key offset in the fw's key table @@ -258,12 +258,13 @@ struct iwl_mvm_keyinfo { * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable * AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field. * @mac_id_n_color: the Mac context this station belongs to - * @addr[ETH_ALEN]: station's MAC address + * @addr: station's MAC address * @sta_id: index of station in uCode's station table * @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave * alone. 1 - modify, 0 - don't change. - * @station_flags: look at %iwl_sta_flags - * @station_flags_msk: what of %station_flags have changed + * @station_flags: look at &enum iwl_sta_flags + * @station_flags_msk: what of %station_flags have changed, + * also &enum iwl_sta_flags * @add_immediate_ba_tid: tid for which to add block-ack support (Rx) * Set %STA_MODIFY_ADD_BA_TID to use this field, and also set * add_immediate_ba_ssn. @@ -274,7 +275,7 @@ struct iwl_mvm_keyinfo { * @sleep_tx_count: number of packets to transmit to station even though it is * asleep. Used to synchronise PS-poll and u-APSD responses while ucode * keeps track of STA sleep state. - * @sleep_state_flags: Look at %iwl_sta_sleep_flag. + * @sleep_state_flags: Look at &enum iwl_sta_sleep_flag. * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP * mac-addr. * @beamform_flags: beam forming controls @@ -335,12 +336,13 @@ enum iwl_sta_type { * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable * AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field. * @mac_id_n_color: the Mac context this station belongs to - * @addr[ETH_ALEN]: station's MAC address + * @addr: station's MAC address * @sta_id: index of station in uCode's station table * @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave * alone. 1 - modify, 0 - don't change. - * @station_flags: look at %iwl_sta_flags - * @station_flags_msk: what of %station_flags have changed + * @station_flags: look at &enum iwl_sta_flags + * @station_flags_msk: what of %station_flags have changed, + * also &enum iwl_sta_flags * @add_immediate_ba_tid: tid for which to add block-ack support (Rx) * Set %STA_MODIFY_ADD_BA_TID to use this field, and also set * add_immediate_ba_ssn. @@ -352,7 +354,7 @@ enum iwl_sta_type { * asleep. Used to synchronise PS-poll and u-APSD responses while ucode * keeps track of STA sleep state. * @station_type: type of this station. See &enum iwl_sta_type. - * @sleep_state_flags: Look at %iwl_sta_sleep_flag. + * @sleep_state_flags: Look at &enum iwl_sta_sleep_flag. * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP * mac-addr. * @beamform_flags: beam forming controls @@ -401,7 +403,7 @@ struct iwl_mvm_add_sta_cmd { * ( REPLY_ADD_STA_KEY = 0x17 ) * @sta_id: index of station in uCode's station table * @key_offset: key offset in key storage - * @key_flags: type %iwl_sta_key_flag + * @key_flags: type &enum iwl_sta_key_flag * @key: key material data * @rx_secur_seq_cnt: RX security sequence counter for the key */ diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h index c03fbb8..e1c7c79 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h @@ -595,9 +595,10 @@ struct iwl_mvm_tx_resp { * struct iwl_mvm_ba_notif - notifies about reception of BA * ( BA_NOTIF = 0xc5 ) * @sta_addr: MAC address + * @reserved: reserved * @sta_id: Index of recipient (BA-sending) station in fw's station table * @tid: tid of the session - * @seq_ctl: + * @seq_ctl: sequence control field * @bitmap: the bitmap of the BA notification as seen in the air * @scd_flow: the tx queue this BA relates to * @scd_ssn: the index of the last contiguously sent packet @@ -606,6 +607,7 @@ struct iwl_mvm_tx_resp { * @reduced_txp: power reduced according to TPC. This is the actual value and * not a copy from the LQ command. Thus, if not the first rate was used * for Tx-ing then this value will be set to 0 by FW. + * @reserved1: reserved */ struct iwl_mvm_ba_notif { u8 sta_addr[ETH_ALEN]; @@ -628,13 +630,13 @@ struct iwl_mvm_ba_notif { * @q_num: TFD queue number * @tfd_index: Index of first un-acked frame in the TFD queue * @scd_queue: For debug only - the physical queue the TFD queue is bound to + * @reserved: reserved for alignment */ struct iwl_mvm_compressed_ba_tfd { __le16 q_num; __le16 tfd_index; u8 scd_queue; - u8 reserved; - __le16 reserved2; + u8 reserved[3]; } __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */ /** @@ -682,11 +684,12 @@ enum iwl_mvm_ba_resp_flags { * @query_frame_cnt: SCD query frame count * @txed: number of frames sent in the aggregation (all-TIDs) * @done: number of frames that were Acked by the BA (all-TIDs) + * @reserved: reserved (for alignment) * @wireless_time: Wireless-media time * @tx_rate: the rate the aggregation was sent at * @tfd_cnt: number of TFD-Q elements * @ra_tid_cnt: number of RATID-Q elements - * @ba_tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd + * @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd * for details. * @ra_tid: array of RA-TID queue status updates. For debug purposes only. See * &iwl_mvm_compressed_ba_ratid for more details. @@ -760,6 +763,7 @@ struct iwl_mac_beacon_cmd_v7 { * struct iwl_mac_beacon_cmd - beacon template command with offloaded CSA * @byte_cnt: byte count of the beacon frame * @flags: for future use + * @reserved: reserved * @data: see &iwl_mac_beacon_cmd_data */ struct iwl_mac_beacon_cmd { @@ -819,9 +823,9 @@ enum iwl_scd_cfg_actions { /** * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command - * @token: + * @token: unused * @sta_id: station id - * @tid: + * @tid: TID * @scd_queue: scheduler queue to confiug * @action: 1 queue enable, 0 queue disable, 2 change txq's tid owner * Value is one of %iwl_scd_cfg_actions options @@ -829,6 +833,7 @@ enum iwl_scd_cfg_actions { * @tx_fifo: %enum iwl_mvm_tx_fifo * @window: BA window size * @ssn: SSN for the BA agreement + * @reserved: reserved */ struct iwl_scd_txq_cfg_cmd { u8 token; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h index a1cce18..3f42efb 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h @@ -412,13 +412,13 @@ struct iwl_tx_ant_cfg_cmd { __le32 valid; } __packed; -/* - * Calibration control struct. +/** + * struct iwl_calib_ctrl - Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to - * flow triggers. + * flow triggers, using &enum iwl_calib_cfg * @event_trigger: bitmap for which calibrations to perform according to - * event triggers. + * event triggers, using &enum iwl_calib_cfg */ struct iwl_calib_ctrl { __le32 flow_trigger; @@ -450,8 +450,10 @@ enum iwl_calib_cfg { IWL_CALIB_CFG_AGC_IDX = BIT(18), }; -/* - * Phy configuration command. +/** + * struct iwl_phy_cfg_cmd - Phy configuration command + * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg + * @calib_control: calibration control data */ struct iwl_phy_cfg_cmd { __le32 phy_cfg; @@ -1576,8 +1578,8 @@ enum iwl_sf_scenario { #define SF_CFG_DUMMY_NOTIF_OFF BIT(16) /** - * Smart Fifo configuration command. - * @state: smart fifo state, types listed in enum %iwl_sf_sate. + * struct iwl_sf_cfg_cmd - Smart Fifo configuration command. + * @state: smart fifo state, types listed in &enum iwl_sf_state. * @watermark: Minimum allowed availabe free space in RXF for transient state. * @long_delay_timeouts: aging and idle timer values for each scenario * in long delay state. @@ -1631,7 +1633,7 @@ struct iwl_mcc_update_cmd { } __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */ /** - * iwl_mcc_update_resp_v1 - response to MCC_UPDATE_CMD. + * struct iwl_mcc_update_resp_v1 - response to MCC_UPDATE_CMD. * Contains the new channel control profile map, if changed, and the new MCC * (mobile country code). * The new MCC may be different than what was requested in MCC_UPDATE_CMD. @@ -1654,7 +1656,7 @@ struct iwl_mcc_update_resp_v1 { } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */ /** - * iwl_mcc_update_resp - response to MCC_UPDATE_CMD. + * struct iwl_mcc_update_resp - response to MCC_UPDATE_CMD. * Contains the new channel control profile map, if changed, and the new MCC * (mobile country code). * The new MCC may be different than what was requested in MCC_UPDATE_CMD. @@ -1736,10 +1738,10 @@ enum iwl_dts_measurement_flags { }; /** - * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements + * struct iwl_dts_measurement_cmd - request DTS temp and/or voltage measurements * - * @flags: indicates which measurements we want as specified in &enum - * iwl_dts_measurement_flags + * @flags: indicates which measurements we want as specified in + * &enum iwl_dts_measurement_flags */ struct iwl_dts_measurement_cmd { __le32 flags; @@ -1791,7 +1793,7 @@ enum iwl_dts_bit_mode { }; /** - * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements + * struct iwl_ext_dts_measurement_cmd - request extended DTS temp measurements * @control_mode: see &enum iwl_dts_control_measurement_mode * @temperature: used when over write DTS mode is selected * @sensor: set temperature sensor to use. See &enum iwl_dts_used @@ -1871,7 +1873,7 @@ struct iwl_mvm_ctdp_cmd { #define IWL_MAX_DTS_TRIPS 8 /** - * struct iwl_temp_report_ths_cmd - set temperature thresholds + * struct temp_report_ths_cmd - set temperature thresholds * * @num_temps: number of temperature thresholds passed * @thresholds: array with the thresholds to be configured @@ -1893,7 +1895,7 @@ enum iwl_tdls_channel_switch_type { }; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */ /** - * Switch timing sub-element in a TDLS channel-switch command + * struct iwl_tdls_channel_switch_timing - Switch timing in TDLS channel-switch * @frame_timestamp: GP2 timestamp of channel-switch request/response packet * received from peer * @max_offchan_duration: What amount of microseconds out of a DTIM is given @@ -1913,7 +1915,7 @@ struct iwl_tdls_channel_switch_timing { #define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200 /** - * TDLS channel switch frame template + * struct iwl_tdls_channel_switch_frame - TDLS channel switch frame template * * A template representing a TDLS channel-switch request or response frame * @@ -1928,7 +1930,7 @@ struct iwl_tdls_channel_switch_frame { } __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */ /** - * TDLS channel switch command + * struct iwl_tdls_channel_switch_cmd - TDLS channel switch command * * The command is sent to initiate a channel switch and also in response to * incoming TDLS channel-switch request/response packets from remote peers. @@ -1948,7 +1950,7 @@ struct iwl_tdls_channel_switch_cmd { } __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */ /** - * TDLS channel switch start notification + * struct iwl_tdls_channel_switch_notif - TDLS channel switch start notification * * @status: non-zero on success * @offchannel_duration: duration given in microseconds @@ -1961,7 +1963,7 @@ struct iwl_tdls_channel_switch_notif { } __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */ /** - * TDLS station info + * struct iwl_tdls_sta_info - TDLS station info * * @sta_id: station id of the TDLS peer * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx @@ -1976,7 +1978,7 @@ struct iwl_tdls_sta_info { } __packed; /* TDLS_STA_INFO_VER_1 */ /** - * TDLS basic config command + * struct iwl_tdls_config_cmd - TDLS basic config command * * @id_and_color: MAC id and color being configured * @tdls_peer_count: amount of currently connected TDLS peers @@ -2000,7 +2002,7 @@ struct iwl_tdls_config_cmd { } __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */ /** - * TDLS per-station config information from FW + * struct iwl_tdls_config_sta_info_res - TDLS per-station config information * * @sta_id: station id of the TDLS peer * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to @@ -2012,7 +2014,7 @@ struct iwl_tdls_config_sta_info_res { } __packed; /* TDLS_STA_INFO_RSP_VER_1 */ /** - * TDLS config information from FW + * struct iwl_tdls_config_res - TDLS config information from FW * * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP * @sta_info: per-station TDLS config information @@ -2028,7 +2030,7 @@ struct iwl_tdls_config_res { #define TX_FIFO_INTERNAL_MAX_NUM 6 /** - * Shared memory configuration information from the FW + * struct iwl_shared_mem_cfg_v1 - Shared memory configuration information * * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not * accessible) @@ -2082,7 +2084,7 @@ struct iwl_shared_mem_lmac_cfg { } __packed; /* SHARED_MEM_ALLOC_LMAC_API_S_VER_1 */ /** - * Shared memory configuration information from the FW + * struct iwl_shared_mem_cfg - Shared memory configuration information * * @shared_mem_addr: shared memory address * @shared_mem_size: shared memory size @@ -2110,7 +2112,7 @@ struct iwl_shared_mem_cfg { } __packed; /* SHARED_MEM_ALLOC_API_S_VER_3 */ /** - * VHT MU-MIMO group configuration + * struct iwl_mu_group_mgmt_cmd - VHT MU-MIMO group configuration * * @membership_status: a bitmap of MU groups * @user_position:the position of station in a group. If the station is in the @@ -2137,7 +2139,7 @@ struct iwl_mu_group_mgmt_notif { #define MAX_STORED_BEACON_SIZE 600 /** - * Stored beacon notification + * struct iwl_stored_beacon_notif - Stored beacon notification * * @system_time: system time on air rise * @tsf: TSF on air rise @@ -2172,7 +2174,7 @@ enum iwl_lqm_status { }; /** - * Link Quality Measurement command + * struct iwl_link_qual_msrmnt_cmd - Link Quality Measurement command * @cmd_operatrion: command operation to be performed (start or stop) * as defined above. * @mac_id: MAC ID the measurement applies to. @@ -2187,7 +2189,7 @@ struct iwl_link_qual_msrmnt_cmd { } __packed /* LQM_CMD_API_S_VER_1 */; /** - * Link Quality Measurement notification + * struct iwl_link_qual_msrmnt_notif - Link Quality Measurement notification * * @frequent_stations_air_time: an array containing the total air time * (in uSec) used by the most frequently transmitting stations. @@ -2215,7 +2217,7 @@ struct iwl_link_qual_msrmnt_notif { } __packed; /* LQM_MEASUREMENT_COMPLETE_NTF_API_S_VER1 */ /** - * Channel switch NOA notification + * struct iwl_channel_switch_noa_notif - Channel switch NOA notification * * @id_and_color: ID and color of the MAC */ -- 2.7.4