From 31171aec23206e00ca4458cc3e3357a5275ccaaa Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 11 Apr 2012 07:18:42 +0000 Subject: [PATCH] r6040: define and use bits of register PHY_CC Define and use the bits of the PHY_CC (status change configuration) register. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/rdc/r6040.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c index afa4186..050cf59 100644 --- a/drivers/net/ethernet/rdc/r6040.c +++ b/drivers/net/ethernet/rdc/r6040.c @@ -128,6 +128,9 @@ #define MID_3M 0x82 /* MID3 Medium */ #define MID_3H 0x84 /* MID3 High */ #define PHY_CC 0x88 /* PHY status change configuration register */ +#define SCEN 0x8000 /* PHY status change enable */ +#define PHYAD_SHIFT 8 /* PHY address shift */ +#define TMRDIV_SHIFT 0 /* Timer divider shift */ #define PHY_ST 0x8A /* PHY status register */ #define MAC_SM 0xAC /* MAC status machine */ #define MAC_SM_RST 0x0002 /* MAC status machine reset */ @@ -1132,10 +1135,15 @@ static int __devinit r6040_init_one(struct pci_dev *pdev, err = -EIO; goto err_out_free_res; } + /* If PHY status change register is still set to zero it means the - * bootloader didn't initialize it */ + * bootloader didn't initialize it, so we set it to: + * - enable phy status change + * - enable all phy addresses + * - set to lowest timer divider */ if (ioread16(ioaddr + PHY_CC) == 0) - iowrite16(0x9f07, ioaddr + PHY_CC); + iowrite16(SCEN | PHY_MAX_ADDR << PHYAD_SHIFT | + 7 << TMRDIV_SHIFT, ioaddr + PHY_CC); /* Init system & device */ lp->base = ioaddr; -- 2.7.4