From 302d29700d0e25beb3c72474f90342f840945894 Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Tue, 27 Nov 2018 05:02:51 -0500 Subject: [PATCH] media: dt-bindings: media: mt9m111: adapt documentation to be more clear Replace the vague binding by a more verbose. Remove the remote property from the example since the driver don't support such a property. Also remove the bus-width property from the endpoint since the driver don't take care of it. Signed-off-by: Marco Felsch Reviewed-by: Rob Herring Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- Documentation/devicetree/bindings/media/i2c/mt9m111.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt index 6b91003..a431fb4 100644 --- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt +++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt @@ -9,8 +9,10 @@ Required Properties: - clocks: reference to the master clock. - clock-names: shall be "mclk". -For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt Example: @@ -21,10 +23,8 @@ Example: clocks = <&mclk>; clock-names = "mclk"; - remote = <&pxa_camera>; port { mt9m111_1: endpoint { - bus-width = <8>; remote-endpoint = <&pxa_camera>; }; }; -- 2.7.4