From 30057f4add4148edfef9f94e32f839c2224e5ebe Mon Sep 17 00:00:00 2001 From: Tommy Huang Date: Wed, 6 Sep 2023 08:49:10 +0800 Subject: [PATCH] i2c: aspeed: Reset the i2c controller when timeout occurs commit fee465150b458351b6d9b9f66084f3cc3022b88b upstream. Reset the i2c controller when an i2c transfer timeout occurs. The remaining interrupts and device should be reset to avoid unpredictable controller behavior. Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support") Cc: # v5.1+ Signed-off-by: Tommy Huang Reviewed-by: Andi Shyti Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-aspeed.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index c64c381..866c52a 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -698,13 +698,16 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, if (time_left == 0) { /* - * If timed out and bus is still busy in a multi master - * environment, attempt recovery at here. + * In a multi-master setup, if a timeout occurs, attempt + * recovery. But if the bus is idle, we still need to reset the + * i2c controller to clear the remaining interrupts. */ if (bus->multi_master && (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS)) aspeed_i2c_recover_bus(bus); + else + aspeed_i2c_reset(bus); /* * If timed out and the state is still pending, drop the pending -- 2.7.4