From 2fee9583198eb97b5351feda7bd825e0f778385c Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Wed, 9 Dec 2020 10:57:44 +0100 Subject: [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors Behavior of CS signal in combination of spi-cs-high and gpio descriptors is not clearly defined and documented. So clarify the documentation Cc: linus.walleij@linaro.org Cc: linux-gpio@vger.kernel.org Signed-off-by: H. Nikolaus Schaller Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/3bed61807fff6268789e7d411412fbc5cd6ffe2a.1607507863.git.hns@goldelico.com Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/spi-controller.yaml | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 1b56d5e..5f50581 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -42,6 +42,33 @@ properties: cs2 : &gpio1 1 0 cs3 : &gpio1 2 0 + The second flag of a gpio descriptor can be GPIO_ACTIVE_HIGH (0) + or GPIO_ACTIVE_LOW(1). Legacy device trees often use 0. + + There is a special rule set for combining the second flag of an + cs-gpio with the optional spi-cs-high flag for SPI slaves. + + Each table entry defines how the CS pin is to be physically + driven (not considering potential gpio inversions by pinmux): + + device node | cs-gpio | CS pin state active | Note + ================+===============+=====================+===== + spi-cs-high | - | H | + - | - | L | + spi-cs-high | ACTIVE_HIGH | H | + - | ACTIVE_HIGH | L | 1 + spi-cs-high | ACTIVE_LOW | H | 2 + - | ACTIVE_LOW | L | + + Notes: + 1) Should print a warning about polarity inversion. + Here it would be wise to avoid and define the gpio as + ACTIVE_LOW. + 2) Should print a warning about polarity inversion + because ACTIVE_LOW is overridden by spi-cs-high. + Should be generally avoided and be replaced by + spi-cs-high + ACTIVE_HIGH. + num-cs: $ref: /schemas/types.yaml#/definitions/uint32 description: -- 2.7.4