From 2faf4ebcee2e587e9a82dd14c9584acab2ce0fce Mon Sep 17 00:00:00 2001 From: Frank Li Date: Mon, 27 Mar 2023 10:55:23 -0400 Subject: [PATCH] arm64: dts: freescale: imx8qxp-mek: enable cadence usb3 Enable USB3 controller, phy and typec related nodes. Signed-off-by: Frank Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 85 +++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index a56c8d0..7924b09 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx8qxp.dtsi" +#include / { model = "Freescale i.MX8QXP MEK"; @@ -28,6 +29,21 @@ gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + gpio-sbu-mux { + compatible = "gpio-sbu-mux"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec_mux>; + select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>; + orientation-switch; + + port { + usb3_data_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + }; }; &dsp { @@ -127,6 +143,42 @@ }; }; }; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + reg = <0x50>; + interrupt-parent = <&lsio_gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + port { + typec_dr_sw: endpoint { + remote-endpoint = <&usb3_drd_sw>; + }; + }; + + usb_con1: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "dual"; + source-pdos = ; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + typec_con_ss: endpoint { + remote-endpoint = <&usb3_data_ss>; + }; + }; + }; + }; + }; + }; &lpuart0 { @@ -204,6 +256,27 @@ status = "okay"; }; +&usb3_phy { + status = "okay"; +}; + +&usbotg3 { + status = "okay"; +}; + +&usbotg3_cdns3 { + dr_mode = "otg"; + usb-role-switch; + status = "okay"; + + port { + usb3_drd_sw: endpoint { + remote-endpoint = <&typec_dr_sw>; + }; + }; +}; + + &vpu { compatible = "nxp,imx8qxp-vpu"; status = "okay"; @@ -267,6 +340,18 @@ >; }; + pinctrl_typec: typecgrp { + fsl,pins = < + IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021 + >; + }; + + pinctrl_typec_mux: typecmuxgrp { + fsl,pins = < + IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x60 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 -- 2.7.4