From 2f1afc880bee4e2f9ebba5eefb45e51c29eaf7ee Mon Sep 17 00:00:00 2001 From: Ulrich Drepper Date: Fri, 3 Mar 2000 20:10:07 +0000 Subject: [PATCH] Update. * sysdeps/unix/sysv/linux/scsi/sg.h: Integrate changes from Linux 2.3.43. 2000-03-02 Andreas Jaeger --- ChangeLog | 5 + localedata/ChangeLog | 5 + sysdeps/unix/sysv/linux/scsi/sg.h | 296 +++++++++++++++++++++++++------------- 3 files changed, 207 insertions(+), 99 deletions(-) diff --git a/ChangeLog b/ChangeLog index 035e49e..b7cf76d 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,5 +1,10 @@ 2000-03-02 Andreas Jaeger + * sysdeps/unix/sysv/linux/scsi/sg.h: Integrate changes from Linux + 2.3.43. + +2000-03-02 Andreas Jaeger + * resolv/Makefile (headers): Add arpa/nameser_compat.h. 2000-03-01 Andreas Jaeger diff --git a/localedata/ChangeLog b/localedata/ChangeLog index 79b1508..39a35a6 100644 --- a/localedata/ChangeLog +++ b/localedata/ChangeLog @@ -1,3 +1,8 @@ +2000-03-01 Andreas Jaeger + + * locales/gv_GB: New file. + From Pablo Saratxaga . + 2000-03-03 Ulrich Drepper * charmaps/ISO-8859-14: Remove wrong duplicate mapping for /xA9. diff --git a/sysdeps/unix/sysv/linux/scsi/sg.h b/sysdeps/unix/sysv/linux/scsi/sg.h index 59e0310..077ccd3 100644 --- a/sysdeps/unix/sysv/linux/scsi/sg.h +++ b/sysdeps/unix/sysv/linux/scsi/sg.h @@ -1,4 +1,4 @@ -/* Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc. +/* Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -28,11 +28,191 @@ #include -/* An SG device is accessed by writing "packets" to it, the replies - are then read using the read call. The same header is used for - replies; ignore the reply_len field. */ -#define SG_MAX_SENSE 16 +/* New interface introduced in the 3.x SG drivers follows */ + +/* Same structure as used by readv() Linux system call. It defines one + scatter-gather element. */ +typedef struct sg_iovec +{ + void * iov_base; /* Starting address */ + size_t iov_len; /* Length in bytes */ +} sg_iovec_t; + + +typedef struct sg_io_hdr +{ + char interface_id; /* [i] 'S' for SCSI generic (required) */ + unsigned char cmd_len; /* [i] SCSI command length ( <= 16 bytes) */ + unsigned char iovec_count; /* [i] 0 implies no scatter gather */ + unsigned char mx_sb_len; /* [i] max length to write to sbp */ + int dxfer_direction; /* [i] data transfer direction */ + unsigned int dxfer_len; /* [i] byte count of data transfer */ + void * dxferp; /* [i], [*io] points to data transfer memory + or scatter gather list */ + unsigned char * cmdp; /* [i], [*i] points to command to perform */ + unsigned char * sbp; /* [i], [*o] points to sense_buffer memory */ + unsigned int timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */ + unsigned int flags; /* [i] 0 -> default, see SG_FLAG... */ + int pack_id; /* [i->o] unused internally (normally) */ + void * usr_ptr; /* [i->o] unused internally */ + unsigned char status; /* [o] scsi status */ + unsigned char masked_status;/* [o] shifted, masked scsi status */ + unsigned char msg_status; /* [o] messaging level data (optional) */ + unsigned char sb_len_wr; /* [o] byte count actually written to sbp */ + unsigned short int host_status; /* [o] errors from host adapter */ + unsigned short int driver_status;/* [o] errors from software driver */ + int resid; /* [o] dxfer_len - actual_transferred */ + unsigned int duration; /* [o] time taken by cmd (unit: millisec) */ + unsigned int info; /* [o] auxiliary information */ +} sg_io_hdr_t; + + +/* Use negative values to flag difference from original sg_header structure. */ +#define SG_DXFER_NONE -1 /* e.g. a SCSI Test Unit Ready command */ +#define SG_DXFER_TO_DEV -2 /* e.g. a SCSI WRITE command */ +#define SG_DXFER_FROM_DEV -3 /* e.g. a SCSI READ command */ +#define SG_DXFER_TO_FROM_DEV -4 /* treated like SG_DXFER_FROM_DEV with the + additional property than during indirect + IO the user buffer is copied into the + kernel buffers before the transfer */ + + +/* following flag values can be "or"-ed together */ +#define SG_FLAG_DIRECT_IO 1 /* default is indirect IO */ +#define SG_FLAG_LUN_INHIBIT 2 /* default is to put device's lun into */ + /* the 2nd byte of SCSI command */ +#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */ + /* user space (debug indirect IO) */ + +/* The following 'info' values are "or"-ed together. */ +#define SG_INFO_OK_MASK 0x1 +#define SG_INFO_OK 0x0 /* no sense, host nor driver "noise" */ +#define SG_INFO_CHECK 0x1 /* something abnormal happened */ + +#define SG_INFO_DIRECT_IO_MASK 0x6 +#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */ +#define SG_INFO_DIRECT_IO 0x2 /* direct IO requested and performed */ +#define SG_INFO_MIXED_IO 0x4 /* part direct, part indirect IO */ + + +/* Request information about a specific SG device, used by + SG_GET_SCSI_ID ioctl (). */ +struct sg_scsi_id { + /* Host number as in "scsi" where 'n' is one of 0, 1, 2 etc. */ + int host_no; + int channel; + /* SCSI id of target device. */ + int scsi_id; + int lun; + /* TYPE_... defined in . */ + int scsi_type; + /* Host (adapter) maximum commands per lun. */ + short int h_cmd_per_lun; + /* Device (or adapter) maximum queue length. */ + short int d_queue_depth; + /* Unused, set to 0 for now. */ + int unused[2]; +}; + +/* Used by SG_GET_REQUEST_TABLE ioctl(). */ +typedef struct sg_req_info { + char req_state; /* 0 -> not used, 1 -> written, 2 -> ready to read */ + char orphan; /* 0 -> normal request, 1 -> from interruped SG_IO */ + char sg_io_owned; /* 0 -> complete with read(), 1 -> owned by SG_IO */ + char problem; /* 0 -> no problem detected, 1 -> error to report */ + int pack_id; /* pack_id associated with request */ + void * usr_ptr; /* user provided pointer (in new interface) */ + unsigned int duration; /* millisecs elapsed since written (req_state==1) + or request duration (req_state==2) */ + int unused; +} sg_req_info_t; + + +/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow. + [Those that only apply to the SG 2.x drivers are at the end of the file.] + (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */ + +#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */ + +/* Used to configure SCSI command transformation layer for ATAPI devices */ +/* Only supported by the ide-scsi driver */ +#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */ + /* 3rd arg = 0 to disable transform, 1 to enable it */ +#define SG_GET_TRANSFORM 0x2205 + +#define SG_SET_RESERVED_SIZE 0x2275 /* request a new reserved buffer size */ +#define SG_GET_RESERVED_SIZE 0x2272 /* actual size of reserved buffer */ + +/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */ +#define SG_GET_SCSI_ID 0x2276 /* Yields fd's bus, chan, dev, lun + type */ +/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */ + +/* Override host setting and always DMA using low memory ( <16MB on i386) */ +#define SG_SET_FORCE_LOW_DMA 0x2279 /* 0-> use adapter setting, 1-> force */ +#define SG_GET_LOW_DMA 0x227a /* 0-> use all ram for dma; 1-> low dma ram */ + +/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which + tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN. + If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0 + then pack_id ignored by read() and oldest readable fetched. */ +#define SG_SET_FORCE_PACK_ID 0x227b +#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */ + +#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */ + +/* Yields max scatter gather tablesize allowed by current host adapter */ +#define SG_GET_SG_TABLESIZE 0x227F /* 0 implies can't do scatter gather */ + +#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */ + +/* Returns -EBUSY if occupied else takes as input: 0 -> do nothing, + 1 -> device reset or 2 -> bus reset (may not be activated yet) */ +#define SG_SCSI_RESET 0x2284 + +/* synchronous SCSI command ioctl, (only in version 3 interface) */ +#define SG_IO 0x2285 /* similar effect as write() followed by read() */ + +#define SG_GET_REQUEST_TABLE 0x2286 /* yields table of active requests */ + +/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */ +#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */ +#define SG_GET_KEEP_ORPHAN 0x2288 + + +#define SG_SCATTER_SZ (8 * 4096) /* PAGE_SIZE not available to user */ +/* Largest size (in bytes) a single scatter-gather list element can have. + The value must be a power of 2 and <= (PAGE_SIZE * 32) [131072 bytes on + i386]. The minimum value is PAGE_SIZE. If scatter-gather not supported + by adapter then this value is the largest data block that can be + read/written by a single scsi command. The user can find the value of + PAGE_SIZE by calling getpagesize() defined in unistd.h . */ + +#define SG_DEFAULT_RETRIES 1 + +/* Defaults, commented if they differ from original sg driver */ +#define SG_DEF_FORCE_LOW_DMA 0 /* was 1 -> memory below 16MB on i386 */ +#define SG_DEF_FORCE_PACK_ID 0 +#define SG_DEF_KEEP_ORPHAN 0 +#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */ + +/* maximum outstanding requests, write() yields EDOM if exceeded */ +#define SG_MAX_QUEUE 16 + +#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE /* for backward compatibility */ + +/* Alternate style type names, "..._t" variants preferred */ +typedef struct sg_io_hdr Sg_io_hdr; +typedef struct sg_io_vec Sg_io_vec; +typedef struct sg_scsi_id Sg_scsi_id; +typedef struct sg_req_info Sg_req_info; + + +/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */ +/* The older SG interface based on the 'sg_header' structure follows. */ +/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */ + +#define SG_MAX_SENSE 16 /* this only applies to the sg_header interface */ struct sg_header { @@ -61,113 +241,31 @@ struct sg_header unsigned char sense_buffer[SG_MAX_SENSE]; }; -/* Request information about a specific SG device. */ -struct sg_scsi_id { - /* Host number as in "scsi" where 'n' is one of 0, 1, 2 etc. */ - int host_no; - int channel; - /* SCSI id of target device. */ - int scsi_id; - int lun; - /* TYPE_... defined in . */ - int scsi_type; - /* Host (adapter) maximum commands per lun. */ - short int h_cmd_per_lun; - /* Device (or adapter) maximum queue length. */ - short int d_queue_depth; - /* Unused, set to 0 for now. */ - int unused1; - /* Unused, set to 0 for now. */ - int unused2; -}; -/* Ioctl's */ +/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t + interface is used. That are kept for backward compatibility with + the original and version 2 drivers. */ + #define SG_SET_TIMEOUT 0x2201 /* Set timeout; *(int *)arg==timeout. */ #define SG_GET_TIMEOUT 0x2202 /* Get timeout; return timeout. */ -#define SG_EMULATED_HOST 0x2203 /* True for emulated host adapter (ATAPI). */ - -/* Used to configure SCSI command transformation layer for ATAPI devices. */ -#define SG_SET_TRANSFORM 0x2204 -#define SG_GET_TRANSFORM 0x2205 - -#define SG_SET_RESERVED_SIZE 0x2275 /* Request a new reserved buffer size. */ -#define SG_GET_RESERVED_SIZE 0x2272 /* Get actual size of reserved buffer */ - -/* The following ioctl takes a 'sg_scsi_id *' object as its 3rd argument. */ -#define SG_GET_SCSI_ID 0x2276 /* Yields fd's bus, chan, dev, lun + type - SCSI id information can also be obtained - from SCSI_IOCTL_GET_IDLUN. */ - -/* Override host setting and always DMA using low memory ( <16MB on i386). */ -#define SG_SET_FORCE_LOW_DMA 0x2279 /* 0-> use adapter setting, 1-> force */ -#define SG_GET_LOW_DMA 0x227a /* 0-> use all ram for dma; 1-> low dma ram */ - -/* If SG_SET_FORCE_PACK_ID is set to 1, pack_id is input to read() which - will attempt to read that pack_id or block (or return EAGAIN). If - pack_id is -1 then read oldest waiting. If SG_SET_FORCE_PACK_ID is - set to 0 then pack_id gets ignored by read() and the oldest - readable is fetched. */ -#define SG_SET_FORCE_PACK_ID 0x227b -#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1). */ - -#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read(). */ - -/* Turn on error sense trace (1..8), dump this device to log/console (9) - or dump all sg device states ( >9 ) to log/console. */ -#define SG_SET_DEBUG 0x227e /* 0 -> turn off debug */ - -/* Yields max scatter gather tablesize allowed by current host adapter. */ -#define SG_GET_SG_TABLESIZE 0x227F /* 0 implies can't do scatter gather */ - -/* Control whether sequencing per file descriptor or per device. */ -#define SG_GET_MERGE_FD 0x2274 /* 0-> per fd, 1-> per device */ -#define SG_SET_MERGE_FD 0x2273 /* Attempt to change sequencing state, - if more than current fd open on device, - will fail with EBUSY. */ - /* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q). */ #define SG_GET_COMMAND_Q 0x2270 /* Yields 0 (queuing off) or 1 (on). */ #define SG_SET_COMMAND_Q 0x2271 /* Change queuing state with 0 or 1. */ -/* Get/set whether DMA underrun will cause an error (DID_ERROR). Currently this - only applies to the [much-used] aic7xxx driver. */ -#define SG_GET_UNDERRUN_FLAG 0x2280 /* Yields 0 (don't flag) or 1 (flag). */ -#define SG_SET_UNDERRUN_FLAG 0x2281 /* Change flag underrun state. */ +/* Turn on error sense trace (1..8), dump this device to log/console (9) + or dump all sg device states ( >9 ) to log/console. */ +#define SG_SET_DEBUG 0x227e /* 0 -> turn off debug */ -#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */ #define SG_NEXT_CMD_LEN 0x2283 /* Override SCSI command length with given number on the next write() on this file descriptor. */ -/* Returns -EBUSY if occupied else takes as input: 0 -> do nothing, - 1 -> device reset or 2 -> bus reset (may not be activated yet). */ -#define SG_SCSI_RESET 0x2284 - - -/* Largest size (in bytes) a single scatter-gather list element can have. - The value must be a power of 2 and <= (PAGE_SIZE * 32) [131072 bytes on - i386]. The minimum value is PAGE_SIZE. If scatter-gather not supported - by adapter then this value is the largest data block that can be - read/written by a single scsi command. The user can find the value of - PAGE_SIZE by calling getpagesize() defined in . */ -#define SG_SCATTER_SZ (8 * 4096) /* PAGE_SIZE is not available to user. */ - -#define SG_DEFAULT_TIMEOUT (60 * HZ) /* 1 minute timeout */ -#define SG_DEFAULT_RETRIES 1 - /* Defaults, commented if they differ from original sg driver */ -#define SG_DEF_COMMAND_Q 0 -#define SG_DEF_MERGE_FD 0 /* was 1 -> per device sequencing */ -#define SG_DEF_FORCE_LOW_DMA 0 /* was 1 -> memory below 16MB on i386 */ -#define SG_DEF_FORCE_PACK_ID 0 -#define SG_DEF_UNDERRUN_FLAG 0 -#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ - -#define SG_MAX_QUEUE 16 /* Maximum outstanding request, arbitrary, - may be changed if sufficient DMA buffer - room available. */ - -#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE /* for backward compatibility */ +#define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */ +#define SG_DEF_COMMAND_Q 0 /* command queuing is always on when + the new interface is used */ +#define SG_DEF_UNDERRUN_FLAG 0 + #endif /* scsi/sg.h */ -- 2.7.4