From 2c3891ab7feb9f1ed3e09f405866585d89efa243 Mon Sep 17 00:00:00 2001 From: aliguori Date: Tue, 13 Jan 2009 15:20:14 +0000 Subject: [PATCH] RTL8139: Latch C+ mode state instead of inferring it from C+ Command register (Avi Kivity) It was observed that Windows 2003 x64 hangs when shutting down if an RTL8139 NIC and a USB device tablet are both present. What seems to be happening is: - the guest shuts down the transmitter and receiver - time passes - the guest requests a tally counter dump As it happens, the tally counter command register overlaps the transmit status register in C mode. Qemu determines whether the chip is in C or C+ mode by looking at the C+ transmit enable bit; as this is now unset, the dump tally counter command is interpreted as a C mode transmit command. The guest doesn't think so, however, and continues to poll for completion of the tally counter dump command. This never occurs, so the guest hangs. Fix by redefining C+ mode as "a write to the C+ command register has occurred since the last reset". The data sheet is silent on the matter. Signed-off-by: Avi Kivity Signed-off-by: Anthony Liguori git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6279 c046a42c-6fe2-441c-8c8c-71466251a162 --- hw/rtl8139.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/hw/rtl8139.c b/hw/rtl8139.c index 8be63c5..70cb080 100644 --- a/hw/rtl8139.c +++ b/hw/rtl8139.c @@ -472,6 +472,8 @@ typedef struct RTL8139State { uint32_t currTxDesc; /* C+ mode */ + uint32_t cplus_enabled; + uint32_t currCPlusRxDesc; uint32_t currCPlusTxDesc; @@ -1232,6 +1234,8 @@ static void rtl8139_reset(RTL8139State *s) s->CSCR = CSCR_F_LINK_100 | CSCR_HEART_BIT | CSCR_LD; s->CpCmd = 0x0; /* reset C+ mode */ + s->cplus_enabled = 0; + // s->BasicModeCtrl = 0x3100; // 100Mbps, full duplex, autonegotiation // s->BasicModeCtrl = 0x2100; // 100Mbps, full duplex @@ -1420,6 +1424,8 @@ static void rtl8139_CpCmd_write(RTL8139State *s, uint32_t val) DEBUG_PRINT(("RTL8139C+ command register write(w) val=0x%04x\n", val)); + s->cplus_enabled = 1; + /* mask unwriteable bits */ val = SET_MASKED(val, 0xff84, s->CpCmd); @@ -2367,7 +2373,7 @@ static void rtl8139_TxStatus_write(RTL8139State *s, uint32_t txRegOffset, uint32 /* handle C+ transmit mode register configuration */ - if (rtl8139_cp_transmitter_enabled(s)) + if (s->cplus_enabled) { DEBUG_PRINT(("RTL8139C+ DTCCR write offset=0x%x val=0x%08x descriptor=%d\n", txRegOffset, val, descriptor)); @@ -3190,6 +3196,8 @@ static void rtl8139_save(QEMUFile* f,void* opaque) qemu_put_be64(f, s->TCTR_base); RTL8139TallyCounters_save(f, &s->tally_counters); + + qemu_put_be32s(f, &s->cplus_enabled); } static int rtl8139_load(QEMUFile* f,void* opaque,int version_id) @@ -3199,7 +3207,7 @@ static int rtl8139_load(QEMUFile* f,void* opaque,int version_id) int ret; /* just 2 versions for now */ - if (version_id > 3) + if (version_id > 4) return -EINVAL; if (version_id >= 3) { @@ -3299,6 +3307,12 @@ static int rtl8139_load(QEMUFile* f,void* opaque,int version_id) RTL8139TallyCounters_clear(&s->tally_counters); } + if (version_id >= 4) { + qemu_get_be32s(f, &s->cplus_enabled); + } else { + s->cplus_enabled = s->CpCmd != 0; + } + return 0; } @@ -3447,7 +3461,7 @@ void pci_rtl8139_init(PCIBus *bus, NICInfo *nd, int devfn) s->cplus_txbuffer_len = 0; s->cplus_txbuffer_offset = 0; - register_savevm("rtl8139", -1, 3, rtl8139_save, rtl8139_load, s); + register_savevm("rtl8139", -1, 4, rtl8139_save, rtl8139_load, s); #ifdef RTL8139_ONBOARD_TIMER s->timer = qemu_new_timer(vm_clock, rtl8139_timer, s); -- 2.7.4