From 2b79c56fb41d3956f672990fe83e342a809c89ab Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Wed, 14 Aug 2013 13:23:32 -0500 Subject: [PATCH] sata, highbank: send extra clock cycles in SGPIO patterns Some SGPIO PICs don't follow the standard very well and expect a certain number of clock cycles or port frames in each SGPIO pattern. Add two optional parameters in the DTB that can provide the number of extra clock cycles to be sent before and after SGPIO pattern. Read those parameters from the DTB and send the extra clock cycles. Signed-off-by: Mark Langsdorf Acked-by: Rob Herring Signed-off-by: Tejun Heo --- Documentation/devicetree/bindings/ata/sata_highbank.txt | 6 ++++++ drivers/ata/sata_highbank.c | 13 +++++++++++++ 2 files changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt index c84833e..aa83407 100644 --- a/Documentation/devicetree/bindings/ata/sata_highbank.txt +++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt @@ -23,6 +23,10 @@ Optional properties: - calxeda,tx-atten : a u32 array that contains TX attenuation override codes, one per port. The upper 3 bytes are always 0 and thus ignored. +- calxeda,pre-clocks : a u32 that indicates the number of additional clock + cycles to transmit before sending an SGPIO pattern +- calxeda,post-clocks: a u32 that indicates the number of additional clock + cycles to transmit after sending an SGPIO pattern Example: sata@ffe08000 { @@ -35,4 +39,6 @@ Example: calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; calxeda,led-order = <4 0 1 2 3>; calxeda,tx-atten = <0xff 22 0xff 0xff 23>; + calxeda,pre-clocks = <10>; + calxeda,post-clocks = <0>; }; diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index ba43c72..0849672 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -84,6 +84,9 @@ static DEFINE_SPINLOCK(sgpio_lock); struct ecx_plat_data { u32 n_ports; + /* number of extra clocks that the SGPIO PIC controller expects */ + u32 pre_clocks; + u32 post_clocks; unsigned sgpio_gpio[SGPIO_PINS]; u32 sgpio_pattern; u32 port_to_sgpio[SGPIO_PORTS]; @@ -160,6 +163,9 @@ static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state, spin_lock_irqsave(&sgpio_lock, flags); ecx_parse_sgpio(pdata, ap->port_no, state); sgpio_out = pdata->sgpio_pattern; + for (i = 0; i < pdata->pre_clocks; i++) + ecx_led_cycle_clock(pdata); + gpio_set_value(pdata->sgpio_gpio[SLOAD], 1); ecx_led_cycle_clock(pdata); gpio_set_value(pdata->sgpio_gpio[SLOAD], 0); @@ -172,6 +178,8 @@ static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state, sgpio_out >>= 1; ecx_led_cycle_clock(pdata); } + for (i = 0; i < pdata->post_clocks; i++) + ecx_led_cycle_clock(pdata); /* save off new led state for port/slot */ emp->led_state = state; @@ -206,6 +214,11 @@ static void highbank_set_em_messages(struct device *dev, of_property_read_u32_array(np, "calxeda,led-order", pdata->port_to_sgpio, pdata->n_ports); + if (of_property_read_u32(np, "calxeda,pre-clocks", &pdata->pre_clocks)) + pdata->pre_clocks = 0; + if (of_property_read_u32(np, "calxeda,post-clocks", + &pdata->post_clocks)) + pdata->post_clocks = 0; /* store em_loc */ hpriv->em_loc = 0; -- 2.7.4