From 2b17a3c759e5e2ed3faafb69e243ec312e3bf0da Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Tue, 26 Mar 2019 22:56:33 -0700 Subject: [PATCH] spi: tegra114: add SPI_LSB_FIRST support Tegra SPI controller supports lsb first mode. Default is MSB bit first and on selection of SPI_LSB_FIRST through SPI mode transmission happens with LSB bit first. This patch adds SPI_LSB_FIRST flag to mode_bits and also configures it on request. Signed-off-by: Sowjanya Komatineni Signed-off-by: Mark Brown --- drivers/spi/spi-tegra114.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 929358e..0c52aee 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -696,6 +696,11 @@ static u32 tegra_spi_setup_transfer_one(struct spi_device *spi, else if (req_mode == SPI_MODE_3) command1 |= SPI_CONTROL_MODE_3; + if (spi->mode & SPI_LSB_FIRST) + command1 |= SPI_LSBIT_FE; + else + command1 &= ~SPI_LSBIT_FE; + if (tspi->cs_control) { if (tspi->cs_control != spi) tegra_spi_writel(tspi, command1, SPI_COMMAND1); @@ -1047,7 +1052,7 @@ static int tegra_spi_probe(struct platform_device *pdev) master->max_speed_hz = 25000000; /* 25MHz */ /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; master->setup = tegra_spi_setup; master->transfer_one_message = tegra_spi_transfer_one_message; master->num_chipselect = MAX_CHIP_SELECT; -- 2.7.4