From 2afdb4c41d7876e430b9bc6e2d7e2fe28609fd6a Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Fri, 23 Nov 2018 12:19:45 +0100 Subject: [PATCH] ARM: OMAP1: ams-delta: Fix audio permanently muted Since commit 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs"), on-board audio has appeared muted. Believed to be unused GPIO pin "hookflash1", apparently set high regardless of the corresponding bit of "latch2" port attempted to be set low during .init_machine(), has been identified as the reason. According to Amstrad E3 wiki, the purpose of the pin hasn't been clearly identified. Original Amstrad software used to produce a high pulse on it when the phone was taken off hook or recall was pressed. With the current finding, we can assume the pin provides a kind of audio mute function. Proper resolution of the issue should be done in two steps: - resolution of an issue with the pin state not reflecting the value the corresponding bit of the port was attempted to be initialized with, - extension of on-board audio driver with a new control. For now, rename the pin to "audio_mute" to reflect its function and, as a quick fix, hogg it as output low so on-board audio can produce audible sound again. Fixes: 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs") Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 3d191fd..1d801f5 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -247,8 +247,8 @@ static struct platform_device latch2_gpio_device = { #define LATCH2_PIN_SCARD_CMDVCC 11 #define LATCH2_PIN_MODEM_NRESET 12 #define LATCH2_PIN_MODEM_CODEC 13 -#define LATCH2_PIN_HOOKFLASH1 14 -#define LATCH2_PIN_HOOKFLASH2 15 +#define LATCH2_PIN_AUDIO_MUTE 14 +#define LATCH2_PIN_HOOKFLASH 15 static struct regulator_consumer_supply modem_nreset_consumers[] = { REGULATOR_SUPPLY("RESET#", "serial8250.1"), @@ -588,6 +588,8 @@ static int gpiochip_match_by_label(struct gpio_chip *chip, void *data) static struct gpiod_hog ams_delta_gpio_hogs[] = { GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout", GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), + GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_AUDIO_MUTE, "audio_mute", + GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), {}, }; -- 2.7.4