From 2ab71a02c56f8244ac611b5c6e6603c6fe83b966 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 25 Jan 2016 09:50:29 +0100 Subject: [PATCH] MIPS: BCM47xx: Move SPROM driver to drivers/firmware/ MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Broadcom ARM home routers store SPROM content in NVRAM just like MIPS ones. To share SPROM code we need to move it out of arch/mips/ to some common place. We already have bcm47xx_nvram in firmware path and SPROM should fit there as well. This driver is responsible for parsing SoC configuration data into a struct shared between ssb and bcma buses. This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0 (ARCH_BCM_5301X). Signed-off-by: Rafał Miłecki Cc: Hauke Mehrtens Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12210/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/bcm47xx/Makefile | 2 +- arch/mips/bcm47xx/bcm47xx_private.h | 3 --- arch/mips/bcm47xx/setup.c | 2 +- drivers/firmware/broadcom/Kconfig | 11 +++++++++ drivers/firmware/broadcom/Makefile | 1 + .../firmware/broadcom/bcm47xx_sprom.c | 27 ++++++++++++++++------ include/linux/bcm47xx_sprom.h | 24 +++++++++++++++++++ 8 files changed, 59 insertions(+), 12 deletions(-) rename arch/mips/bcm47xx/sprom.c => drivers/firmware/broadcom/bcm47xx_sprom.c (98%) create mode 100644 include/linux/bcm47xx_sprom.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2352917..882e73c3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -197,6 +197,7 @@ config BCM47XX select GPIOLIB select LEDS_GPIO_REGISTER select BCM47XX_NVRAM + select BCM47XX_SPROM help Support for BCM47XX based boards diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile index 66bea4e..6d86150 100644 --- a/arch/mips/bcm47xx/Makefile +++ b/arch/mips/bcm47xx/Makefile @@ -3,5 +3,5 @@ # under Linux. # -obj-y += irq.o prom.o serial.o setup.o time.o sprom.o +obj-y += irq.o prom.o serial.o setup.o time.o obj-y += board.o buttons.o leds.o workarounds.o diff --git a/arch/mips/bcm47xx/bcm47xx_private.h b/arch/mips/bcm47xx/bcm47xx_private.h index 41796be..0367ac7 100644 --- a/arch/mips/bcm47xx/bcm47xx_private.h +++ b/arch/mips/bcm47xx/bcm47xx_private.h @@ -10,9 +10,6 @@ /* prom.c */ void __init bcm47xx_prom_highmem_init(void); -/* sprom.c */ -void bcm47xx_sprom_register_fallbacks(void); - /* buttons.c */ int __init bcm47xx_buttons_register(void); diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index c807e32..6054d49 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -28,6 +28,7 @@ #include "bcm47xx_private.h" +#include #include #include #include @@ -151,7 +152,6 @@ void __init plat_mem_setup(void) pr_info("Using bcma bus\n"); #ifdef CONFIG_BCM47XX_BCMA bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA; - bcm47xx_sprom_register_fallbacks(); bcm47xx_register_bcma(); bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id); #ifdef CONFIG_HIGHMEM diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig index 6bed1199..3c7e5b7 100644 --- a/drivers/firmware/broadcom/Kconfig +++ b/drivers/firmware/broadcom/Kconfig @@ -9,3 +9,14 @@ config BCM47XX_NVRAM This driver provides an easy way to get value of requested parameter. It simply reads content of NVRAM and parses it. It doesn't control any hardware part itself. + +config BCM47XX_SPROM + bool "Broadcom SPROM driver" + depends on BCM47XX_NVRAM + help + Broadcom devices store configuration data in SPROM. Accessing it is + specific to the bus host type, e.g. PCI(e) devices have it mapped in + a PCI BAR. + In case of SoC devices SPROM content is stored on a flash used by + bootloader firmware CFE. This driver provides method to ssb and bcma + drivers to read SPROM on SoC. diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile index d0e6835..f93efc4 100644 --- a/drivers/firmware/broadcom/Makefile +++ b/drivers/firmware/broadcom/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o +obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o diff --git a/arch/mips/bcm47xx/sprom.c b/drivers/firmware/broadcom/bcm47xx_sprom.c similarity index 98% rename from arch/mips/bcm47xx/sprom.c rename to drivers/firmware/broadcom/bcm47xx_sprom.c index ca7ad13..b6eb875 100644 --- a/arch/mips/bcm47xx/sprom.c +++ b/drivers/firmware/broadcom/bcm47xx_sprom.c @@ -26,9 +26,11 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include -#include +#include +#include #include +#include +#include static void create_key(const char *prefix, const char *postfix, const char *name, char *buf, int len) @@ -599,7 +601,7 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix, bcm47xx_sprom_fill_auto(sprom, prefix, fallback); } -#if defined(CONFIG_BCM47XX_SSB) +#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM) static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out) { char prefix[10]; @@ -622,7 +624,7 @@ static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out) } #endif -#if defined(CONFIG_BCM47XX_BCMA) +#if IS_BUILTIN(CONFIG_BCMA) /* * Having many NVRAM entries for PCI devices led to repeating prefixes like * pci/1/1/ all the time and wasting flash space. So at some point Broadcom @@ -706,19 +708,30 @@ static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out) } #endif +static unsigned int bcm47xx_sprom_registered; + /* * On bcm47xx we need to register SPROM fallback handler very early, so we can't * use anything like platform device / driver for this. */ -void bcm47xx_sprom_register_fallbacks(void) +int bcm47xx_sprom_register_fallbacks(void) { -#if defined(CONFIG_BCM47XX_SSB) + if (bcm47xx_sprom_registered) + return 0; + +#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM) if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb)) pr_warn("Failed to register ssb SPROM handler\n"); #endif -#if defined(CONFIG_BCM47XX_BCMA) +#if IS_BUILTIN(CONFIG_BCMA) if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma)) pr_warn("Failed to register bcma SPROM handler\n"); #endif + + bcm47xx_sprom_registered = 1; + + return 0; } + +fs_initcall(bcm47xx_sprom_register_fallbacks); diff --git a/include/linux/bcm47xx_sprom.h b/include/linux/bcm47xx_sprom.h new file mode 100644 index 0000000..c06b47c --- /dev/null +++ b/include/linux/bcm47xx_sprom.h @@ -0,0 +1,24 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __BCM47XX_SPROM_H +#define __BCM47XX_SPROM_H + +#include +#include +#include + +#ifdef CONFIG_BCM47XX_SPROM +int bcm47xx_sprom_register_fallbacks(void); +#else +static inline int bcm47xx_sprom_register_fallbacks(void) +{ + return -ENOTSUPP; +}; +#endif + +#endif /* __BCM47XX_SPROM_H */ -- 2.7.4