From 2a7326caab479ca257c4b9bd67db42d1d49079bf Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 15 Sep 2019 15:54:44 +0200 Subject: [PATCH] ARM: dts: dir685: Drop spi-cpol from the display The D-Link DIR-685 had its clock polarity set as active low using the special SPI "spi-cpol" property. This is not correct: the datasheet clearly states: "Fix SCL to GND level when not in use" which is indicative that this line is active high. After a recent fix making the GPIO-based SPI driver force the clock line de-asserted at the beginning of each SPI transaction this reared its ugly head: now de-asserted was taken to mean the line should be driven high, but it should be driven low. Fix this up in the DTS file and the display works again. Link: https://lore.kernel.org/r/20190915135444.11066-1-linus.walleij@linaro.org Cc: Mark Brown Fixes: 2922d1cc1696 ("spi: gpio: Add SPI_MASTER_GPIO_SS flag") Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index bfaa2de..e2030ba 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -72,7 +72,6 @@ reg = <0>; /* 50 ns min period = 20 MHz */ spi-max-frequency = <20000000>; - spi-cpol; /* Clock active low */ vcc-supply = <&vdisp>; iovcc-supply = <&vdisp>; vci-supply = <&vdisp>; -- 2.7.4