From 2a5aa8c2d96550c8463ef3714a20b46397f58b52 Mon Sep 17 00:00:00 2001 From: Anas Nashif Date: Sun, 4 Nov 2012 20:48:06 -0800 Subject: [PATCH] Imported Upstream version 1.10 --- ABOUT-NLS | 1327 ++++ AUTHORS | 3 + COPYING | 674 ++ ChangeLog | 1362 ++++ INSTALL | 365 + Makefile.am | 33 + Makefile.in | 788 ++ NEWS | 215 + NOTE-WARNING | 34 + README | 99 + THANKS | 8 + aclocal.m4 | 992 +++ autoconf.h.in | 144 + build-aux/config.guess | 1501 ++++ build-aux/config.rpath | 672 ++ build-aux/config.sub | 1705 +++++ build-aux/depcomp | 630 ++ build-aux/install-sh | 520 ++ build-aux/ltmain.sh | 8625 ++++++++++++++++++++++ build-aux/mdate-sh | 205 + build-aux/missing | 376 + build-aux/texinfo.tex | 9291 ++++++++++++++++++++++++ compat/Makefile.am | 54 + compat/Makefile.in | 655 ++ compat/close.c | 35 + compat/dbm-priv.h | 22 + compat/dbm.h | 38 + compat/dbmclose.c | 37 + compat/dbmdelete.c | 34 + compat/dbmdirfno.c | 32 + compat/dbmerr.c | 32 + compat/dbmfetch.c | 43 + compat/dbminit.c | 56 + compat/dbmopen.c | 279 + compat/dbmpagfno.c | 32 + compat/dbmrdonly.c | 30 + compat/dbmseq.c | 68 + compat/dbmstore.c | 35 + compat/delete.c | 31 + compat/fetch.c | 32 + compat/ndbm.h | 66 + compat/seq.c | 41 + compat/store.c | 32 + configure | 18239 +++++++++++++++++++++++++++++++++++++++++++++++ configure.ac | 126 + doc/Makefile.am | 83 + doc/Makefile.in | 811 +++ doc/fdl.texi | 507 ++ doc/gdbm.3 | 468 ++ doc/gdbm.info | 2327 ++++++ doc/gdbm.texinfo | 1873 +++++ doc/stamp-vti | 4 + doc/version.texi | 4 + export/Makefile.am | 21 + export/Makefile.in | 586 ++ export/export.c | 102 + m4/gettext.m4 | 383 + m4/iconv.m4 | 199 + m4/intlmacosx.m4 | 51 + m4/lib-ld.m4 | 110 + m4/lib-link.m4 | 774 ++ m4/lib-prefix.m4 | 224 + m4/libtool.m4 | 7392 +++++++++++++++++++ m4/ltoptions.m4 | 368 + m4/ltsugar.m4 | 123 + m4/ltversion.m4 | 23 + m4/lt~obsolete.m4 | 98 + m4/nls.m4 | 32 + m4/po.m4 | 449 ++ m4/progtest.m4 | 92 + po/LINGUAS | 6 + po/Makefile.in.in | 444 ++ po/Makevars | 60 + po/POTFILES.in | 23 + po/Rules-quot | 47 + po/boldquot.sed | 10 + po/de.gmo | Bin 0 -> 9737 bytes po/de.po | 708 ++ po/en@boldquot.header | 25 + po/en@quot.header | 22 + po/fi.gmo | Bin 0 -> 10435 bytes po/fi.po | 712 ++ po/gdbm.pot | 667 ++ po/insert-header.sin | 23 + po/ja.gmo | Bin 0 -> 11388 bytes po/ja.po | 707 ++ po/pl.gmo | Bin 0 -> 10293 bytes po/pl.po | 711 ++ po/quot.sed | 6 + po/remove-potcdate.sin | 19 + po/stamp-po | 1 + po/uk.gmo | Bin 0 -> 13092 bytes po/uk.po | 715 ++ src/Makefile.am | 67 + src/Makefile.in | 751 ++ src/bucket.c | 319 + src/falloc.c | 470 ++ src/findkey.c | 145 + src/flatfile.c | 246 + src/fullio.c | 70 + src/gdbm.h | 159 + src/gdbm.h.in | 159 + src/gdbmclose.c | 61 + src/gdbmconst.h | 52 + src/gdbmdefs.h | 221 + src/gdbmdelete.c | 106 + src/gdbmerrno.c | 70 + src/gdbmexists.c | 34 + src/gdbmfdesc.c | 30 + src/gdbmfetch.c | 63 + src/gdbmopen.c | 475 ++ src/gdbmreorg.c | 218 + src/gdbmseq.c | 129 + src/gdbmsetopt.c | 258 + src/gdbmstore.c | 156 + src/gdbmsync.c | 37 + src/gettext.h | 280 + src/hash.c | 47 + src/lock.c | 154 + src/mmap.c | 366 + src/proto.h | 62 + src/systems.h | 89 + src/testgdbm.c | 1227 ++++ src/update.c | 114 + src/version.c | 57 + tests/Makefile.am | 135 + tests/Makefile.in | 728 ++ tests/atlocal.in | 24 + tests/cloexec00.at | 25 + tests/cloexec01.at | 25 + tests/cloexec02.at | 27 + tests/cloexec03.at | 26 + tests/create00.at | 29 + tests/d_creat_ce.c | 90 + tests/dbmcreate00.at | 30 + tests/dbmcvt.at | 34 + tests/dbmdel00.at | 40 + tests/dbmdel01.at | 32 + tests/dbmdel02.at | 29 + tests/dbmfetch00.at | 32 + tests/dbmfetch01.at | 31 + tests/dbmfetch02.at | 32 + tests/dbmfetch03.at | 36 + tests/delete00.at | 39 + tests/delete01.at | 31 + tests/delete02.at | 28 + tests/dtdel.c | 96 + tests/dtdump.c | 97 + tests/dtfetch.c | 119 + tests/dtload.c | 151 + tests/fdop.c | 36 + tests/fetch00.at | 31 + tests/fetch01.at | 30 + tests/g_open_ce.c | 66 + tests/g_reorg_ce.c | 72 + tests/gtdel.c | 98 + tests/gtdump.c | 113 + tests/gtfetch.c | 127 + tests/gtload.c | 174 + tests/gtopt.c | 414 ++ tests/gtver.c | 74 + tests/num2word.c | 255 + tests/package.m4 | 9 + tests/progname.h | 32 + tests/setopt00.at | 61 + tests/setopt01.at | 37 + tests/testsuite | 3234 +++++++++ tests/testsuite.at | 73 + tests/version.at | 25 + 169 files changed, 85247 insertions(+) create mode 100644 ABOUT-NLS create mode 100644 AUTHORS create mode 100644 COPYING create mode 100644 ChangeLog create mode 100644 INSTALL create mode 100644 Makefile.am create mode 100644 Makefile.in create mode 100644 NEWS create mode 100644 NOTE-WARNING create mode 100644 README create mode 100644 THANKS create mode 100644 aclocal.m4 create mode 100644 autoconf.h.in create mode 100755 build-aux/config.guess create mode 100755 build-aux/config.rpath create mode 100755 build-aux/config.sub create mode 100755 build-aux/depcomp create mode 100755 build-aux/install-sh create mode 100755 build-aux/ltmain.sh create mode 100755 build-aux/mdate-sh create mode 100755 build-aux/missing create mode 100644 build-aux/texinfo.tex create mode 100644 compat/Makefile.am create mode 100644 compat/Makefile.in create mode 100644 compat/close.c create mode 100644 compat/dbm-priv.h create mode 100644 compat/dbm.h create mode 100644 compat/dbmclose.c create mode 100644 compat/dbmdelete.c create mode 100644 compat/dbmdirfno.c create mode 100644 compat/dbmerr.c create mode 100644 compat/dbmfetch.c create mode 100644 compat/dbminit.c create mode 100644 compat/dbmopen.c create mode 100644 compat/dbmpagfno.c create mode 100644 compat/dbmrdonly.c create mode 100644 compat/dbmseq.c create mode 100644 compat/dbmstore.c create mode 100644 compat/delete.c create mode 100644 compat/fetch.c create mode 100644 compat/ndbm.h create mode 100644 compat/seq.c create mode 100644 compat/store.c create mode 100755 configure create mode 100644 configure.ac create mode 100644 doc/Makefile.am create mode 100644 doc/Makefile.in create mode 100644 doc/fdl.texi create mode 100644 doc/gdbm.3 create mode 100644 doc/gdbm.info create mode 100644 doc/gdbm.texinfo create mode 100644 doc/stamp-vti create mode 100644 doc/version.texi create mode 100644 export/Makefile.am create mode 100644 export/Makefile.in create mode 100644 export/export.c create mode 100644 m4/gettext.m4 create mode 100644 m4/iconv.m4 create mode 100644 m4/intlmacosx.m4 create mode 100644 m4/lib-ld.m4 create mode 100644 m4/lib-link.m4 create mode 100644 m4/lib-prefix.m4 create mode 100644 m4/libtool.m4 create mode 100644 m4/ltoptions.m4 create mode 100644 m4/ltsugar.m4 create mode 100644 m4/ltversion.m4 create mode 100644 m4/lt~obsolete.m4 create mode 100644 m4/nls.m4 create mode 100644 m4/po.m4 create mode 100644 m4/progtest.m4 create mode 100644 po/LINGUAS create mode 100644 po/Makefile.in.in create mode 100644 po/Makevars create mode 100644 po/POTFILES.in create mode 100644 po/Rules-quot create mode 100644 po/boldquot.sed create mode 100644 po/de.gmo create mode 100644 po/de.po create mode 100644 po/en@boldquot.header create mode 100644 po/en@quot.header create mode 100644 po/fi.gmo create mode 100644 po/fi.po create mode 100644 po/gdbm.pot create mode 100644 po/insert-header.sin create mode 100644 po/ja.gmo create mode 100644 po/ja.po create mode 100644 po/pl.gmo create mode 100644 po/pl.po create mode 100644 po/quot.sed create mode 100644 po/remove-potcdate.sin create mode 100644 po/stamp-po create mode 100644 po/uk.gmo create mode 100644 po/uk.po create mode 100644 src/Makefile.am create mode 100644 src/Makefile.in create mode 100644 src/bucket.c create mode 100644 src/falloc.c create mode 100644 src/findkey.c create mode 100644 src/flatfile.c create mode 100644 src/fullio.c create mode 100644 src/gdbm.h create mode 100644 src/gdbm.h.in create mode 100644 src/gdbmclose.c create mode 100644 src/gdbmconst.h create mode 100644 src/gdbmdefs.h create mode 100644 src/gdbmdelete.c create mode 100644 src/gdbmerrno.c create mode 100644 src/gdbmexists.c create mode 100644 src/gdbmfdesc.c create mode 100644 src/gdbmfetch.c create mode 100644 src/gdbmopen.c create mode 100644 src/gdbmreorg.c create mode 100644 src/gdbmseq.c create mode 100644 src/gdbmsetopt.c create mode 100644 src/gdbmstore.c create mode 100644 src/gdbmsync.c create mode 100644 src/gettext.h create mode 100644 src/hash.c create mode 100644 src/lock.c create mode 100644 src/mmap.c create mode 100644 src/proto.h create mode 100644 src/systems.h create mode 100644 src/testgdbm.c create mode 100644 src/update.c create mode 100644 src/version.c create mode 100644 tests/Makefile.am create mode 100644 tests/Makefile.in create mode 100644 tests/atlocal.in create mode 100644 tests/cloexec00.at create mode 100644 tests/cloexec01.at create mode 100644 tests/cloexec02.at create mode 100644 tests/cloexec03.at create mode 100644 tests/create00.at create mode 100644 tests/d_creat_ce.c create mode 100644 tests/dbmcreate00.at create mode 100644 tests/dbmcvt.at create mode 100644 tests/dbmdel00.at create mode 100644 tests/dbmdel01.at create mode 100644 tests/dbmdel02.at create mode 100644 tests/dbmfetch00.at create mode 100644 tests/dbmfetch01.at create mode 100644 tests/dbmfetch02.at create mode 100644 tests/dbmfetch03.at create mode 100644 tests/delete00.at create mode 100644 tests/delete01.at create mode 100644 tests/delete02.at create mode 100644 tests/dtdel.c create mode 100644 tests/dtdump.c create mode 100644 tests/dtfetch.c create mode 100644 tests/dtload.c create mode 100644 tests/fdop.c create mode 100644 tests/fetch00.at create mode 100644 tests/fetch01.at create mode 100644 tests/g_open_ce.c create mode 100644 tests/g_reorg_ce.c create mode 100644 tests/gtdel.c create mode 100644 tests/gtdump.c create mode 100644 tests/gtfetch.c create mode 100644 tests/gtload.c create mode 100644 tests/gtopt.c create mode 100644 tests/gtver.c create mode 100644 tests/num2word.c create mode 100644 tests/package.m4 create mode 100644 tests/progname.h create mode 100644 tests/setopt00.at create mode 100644 tests/setopt01.at create mode 100755 tests/testsuite create mode 100644 tests/testsuite.at create mode 100644 tests/version.at diff --git a/ABOUT-NLS b/ABOUT-NLS new file mode 100644 index 0000000..4f50fb5 --- /dev/null +++ b/ABOUT-NLS @@ -0,0 +1,1327 @@ +1 Notes on the Free Translation Project +*************************************** + +Free software is going international! The Free Translation Project is +a way to get maintainers of free software, translators, and users all +together, so that free software will gradually become able to speak many +languages. A few packages already provide translations for their +messages. + + If you found this `ABOUT-NLS' file inside a distribution, you may +assume that the distributed package does use GNU `gettext' internally, +itself available at your nearest GNU archive site. But you do _not_ +need to install GNU `gettext' prior to configuring, installing or using +this package with messages translated. + + Installers will find here some useful hints. These notes also +explain how users should proceed for getting the programs to use the +available translations. They tell how people wanting to contribute and +work on translations can contact the appropriate team. + + When reporting bugs in the `intl/' directory or bugs which may be +related to internationalization, you should tell about the version of +`gettext' which is used. The information can be found in the +`intl/VERSION' file, in internationalized packages. + +1.1 Quick configuration advice +============================== + +If you want to exploit the full power of internationalization, you +should configure it using + + ./configure --with-included-gettext + +to force usage of internationalizing routines provided within this +package, despite the existence of internationalizing capabilities in the +operating system where this package is being installed. So far, only +the `gettext' implementation in the GNU C library version 2 provides as +many features (such as locale alias, message inheritance, automatic +charset conversion or plural form handling) as the implementation here. +It is also not possible to offer this additional functionality on top +of a `catgets' implementation. Future versions of GNU `gettext' will +very likely convey even more functionality. So it might be a good idea +to change to GNU `gettext' as soon as possible. + + So you need _not_ provide this option if you are using GNU libc 2 or +you have installed a recent copy of the GNU gettext package with the +included `libintl'. + +1.2 INSTALL Matters +=================== + +Some packages are "localizable" when properly installed; the programs +they contain can be made to speak your own native language. Most such +packages use GNU `gettext'. Other packages have their own ways to +internationalization, predating GNU `gettext'. + + By default, this package will be installed to allow translation of +messages. It will automatically detect whether the system already +provides the GNU `gettext' functions. If not, the included GNU +`gettext' library will be used. This library is wholly contained +within this package, usually in the `intl/' subdirectory, so prior +installation of the GNU `gettext' package is _not_ required. +Installers may use special options at configuration time for changing +the default behaviour. The commands: + + ./configure --with-included-gettext + ./configure --disable-nls + +will, respectively, bypass any pre-existing `gettext' to use the +internationalizing routines provided within this package, or else, +_totally_ disable translation of messages. + + When you already have GNU `gettext' installed on your system and run +configure without an option for your new package, `configure' will +probably detect the previously built and installed `libintl.a' file and +will decide to use this. This might not be desirable. You should use +the more recent version of the GNU `gettext' library. I.e. if the file +`intl/VERSION' shows that the library which comes with this package is +more recent, you should use + + ./configure --with-included-gettext + +to prevent auto-detection. + + The configuration process will not test for the `catgets' function +and therefore it will not be used. The reason is that even an +emulation of `gettext' on top of `catgets' could not provide all the +extensions of the GNU `gettext' library. + + Internationalized packages usually have many `po/LL.po' files, where +LL gives an ISO 639 two-letter code identifying the language. Unless +translations have been forbidden at `configure' time by using the +`--disable-nls' switch, all available translations are installed +together with the package. However, the environment variable `LINGUAS' +may be set, prior to configuration, to limit the installed set. +`LINGUAS' should then contain a space separated list of two-letter +codes, stating which languages are allowed. + +1.3 Using This Package +====================== + +As a user, if your language has been installed for this package, you +only have to set the `LANG' environment variable to the appropriate +`LL_CC' combination. If you happen to have the `LC_ALL' or some other +`LC_xxx' environment variables set, you should unset them before +setting `LANG', otherwise the setting of `LANG' will not have the +desired effect. Here `LL' is an ISO 639 two-letter language code, and +`CC' is an ISO 3166 two-letter country code. For example, let's +suppose that you speak German and live in Germany. At the shell +prompt, merely execute `setenv LANG de_DE' (in `csh'), +`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). +This can be done from your `.login' or `.profile' file, once and for +all. + + You might think that the country code specification is redundant. +But in fact, some languages have dialects in different countries. For +example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The +country code serves to distinguish the dialects. + + The locale naming convention of `LL_CC', with `LL' denoting the +language and `CC' denoting the country, is the one use on systems based +on GNU libc. On other systems, some variations of this scheme are +used, such as `LL' or `LL_CC.ENCODING'. You can get the list of +locales supported by your system for your language by running the +command `locale -a | grep '^LL''. + + Not all programs have translations for all languages. By default, an +English message is shown in place of a nonexistent translation. If you +understand other languages, you can set up a priority list of languages. +This is done through a different environment variable, called +`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' +for the purpose of message handling, but you still need to have `LANG' +set to the primary language; this is required by other parts of the +system libraries. For example, some Swedish users who would rather +read translations in German than English for when Swedish is not +available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. + + Special advice for Norwegian users: The language code for Norwegian +bokma*l changed from `no' to `nb' recently (in 2003). During the +transition period, while some message catalogs for this language are +installed under `nb' and some older ones under `no', it's recommended +for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and +older translations are used. + + In the `LANGUAGE' environment variable, but not in the `LANG' +environment variable, `LL_CC' combinations can be abbreviated as `LL' +to denote the language's main dialect. For example, `de' is equivalent +to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' +(Portuguese as spoken in Portugal) in this context. + +1.4 Translating Teams +===================== + +For the Free Translation Project to be a success, we need interested +people who like their own language and write it well, and who are also +able to synergize with other translators speaking the same language. +Each translation team has its own mailing list. The up-to-date list of +teams can be found at the Free Translation Project's homepage, +`http://translationproject.org/', in the "Teams" area. + + If you'd like to volunteer to _work_ at translating messages, you +should become a member of the translating team for your own language. +The subscribing address is _not_ the same as the list itself, it has +`-request' appended. For example, speakers of Swedish can send a +message to `sv-request@li.org', having this message body: + + subscribe + + Keep in mind that team members are expected to participate +_actively_ in translations, or at solving translational difficulties, +rather than merely lurking around. If your team does not exist yet and +you want to start one, or if you are unsure about what to do or how to +get started, please write to `coordinator@translationproject.org' to +reach the coordinator for all translator teams. + + The English team is special. It works at improving and uniformizing +the terminology in use. Proven linguistic skills are praised more than +programming skills, here. + +1.5 Available Packages +====================== + +Languages are not equally supported in all packages. The following +matrix shows the current state of internationalization, as of May 2010. +The matrix shows, in regard of each package, for which languages PO +files have been submitted to translation coordination, with a +translation percentage of at least 50%. + + Ready PO files af am ar as ast az be be@latin bg bn_IN bs ca crh + +---------------------------------------------------+ + a2ps | [] [] | + aegis | | + ant-phone | | + anubis | | + aspell | [] [] | + bash | | + bfd | | + bibshelf | [] | + binutils | | + bison | | + bison-runtime | [] | + bluez-pin | [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] [] | + cpio | | + cppi | | + cpplib | [] | + cryptsetup | | + dfarc | | + dialog | [] [] | + dico | | + diffutils | [] | + dink | | + doodle | | + e2fsprogs | [] | + enscript | [] | + exif | | + fetchmail | [] | + findutils | [] | + flex | [] | + freedink | | + gas | | + gawk | [] [] | + gcal | [] | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] [] [] | + gettext-tools | [] [] | + gip | [] | + gjay | | + gliv | [] | + glunarclock | [] [] | + gnubiff | | + gnucash | [] | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | | + gold | | + gpe-aerial | | + gpe-beam | | + gpe-bluetooth | | + gpe-calendar | | + gpe-clock | [] | + gpe-conf | | + gpe-contacts | | + gpe-edit | | + gpe-filemanager | | + gpe-go | | + gpe-login | | + gpe-ownerinfo | [] | + gpe-package | | + gpe-sketchbook | | + gpe-su | [] | + gpe-taskmanager | [] | + gpe-timesheet | [] | + gpe-today | [] | + gpe-todo | | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | [] [] | + gsasl | | + gss | | + gst-plugins-bad | [] | + gst-plugins-base | [] | + gst-plugins-good | [] | + gst-plugins-ugly | [] | + gstreamer | [] [] [] | + gtick | | + gtkam | [] | + gtkorphan | [] | + gtkspell | [] [] [] | + gutenprint | | + hello | [] | + help2man | | + hylafax | | + idutils | | + indent | [] [] | + iso_15924 | | + iso_3166 | [] [] [] [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | | + iso_639 | [] [] [] [] [] | + iso_639_3 | [] | + jwhois | | + kbd | | + keytouch | [] | + keytouch-editor | | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | | + ld | [] | + leafpad | [] [] | + libc | [] [] | + libexif | () | + libextractor | | + libgnutls | | + libgpewidget | | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | [] | + libidn | | + lifelines | | + liferea | [] [] | + lilypond | | + linkdr | [] | + lordsawar | | + lprng | | + lynx | [] | + m4 | | + mailfromd | | + mailutils | | + make | | + man-db | | + man-db-manpages | | + minicom | | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | | + psmisc | | + pspp | [] | + pwdutils | | + radius | [] | + recode | [] [] | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] | + sed | [] [] | + sharutils | [] [] | + shishi | | + skencil | | + solfege | | + solfege-manual | | + soundtracker | | + sp | | + sysstat | | + tar | [] | + texinfo | | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] [] | + wyslij-po | | + xchat | [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +---------------------------------------------------+ + af am ar as ast az be be@latin bg bn_IN bs ca crh + 6 0 2 3 19 1 11 3 28 3 1 38 5 + + cs da de el en en_GB en_ZA eo es et eu fa fi + +-------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] () | + anubis | [] [] [] | + aspell | [] [] [] [] [] | + bash | [] [] [] [] | + bfd | [] [] | + bibshelf | [] [] [] [] | + binutils | [] [] | + bison | [] [] [] | + bison-runtime | [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] | + bombono-dvd | [] [] | + buzztard | [] [] [] | + cflow | [] [] [] | + clisp | [] [] [] [] | + coreutils | [] [] [] [] | + cpio | [] | + cppi | [] | + cpplib | [] [] [] | + cryptsetup | [] | + dfarc | [] [] [] [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] [] | + dink | [] [] [] | + doodle | [] | + e2fsprogs | [] [] [] | + enscript | [] [] [] | + exif | () [] [] [] | + fetchmail | [] [] () [] [] [] | + findutils | [] [] [] [] | + flex | [] [] [] | + freedink | [] [] [] [] | + gas | [] | + gawk | [] [] [] | + gcal | [] | + gcc | [] [] | + gettext-examples | [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] | + gettext-tools | [] [] [] | + gip | [] [] [] [] [] | + gjay | [] [] | + gliv | [] [] [] [] | + glunarclock | [] [] [] | + gnubiff | () | + gnucash | [] () () () () () | + gnuedu | [] [] | + gnulib | [] [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] [] | + gpe-aerial | [] [] [] [] [] | + gpe-beam | [] [] [] [] [] | + gpe-bluetooth | [] [] [] | + gpe-calendar | [] [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] [] [] | + gpe-contacts | [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] [] | + gpe-go | [] [] [] [] [] | + gpe-login | [] [] [] | + gpe-ownerinfo | [] [] [] [] [] | + gpe-package | [] [] [] [] | + gpe-sketchbook | [] [] [] [] [] | + gpe-su | [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] | + gpe-today | [] [] [] [] [] | + gpe-todo | [] [] [] [] | + gphoto2 | [] [] () [] [] [] [] | + gprof | [] [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] [] | + grub | [] [] [] | + gsasl | [] [] | + gss | [] | + gst-plugins-bad | [] [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] [] | + gtick | [] () [] [] | + gtkam | [] [] () [] [] | + gtkorphan | [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] | + gutenprint | [] [] [] [] | + hello | [] [] [] [] [] | + help2man | [] [] | + hylafax | [] [] | + idutils | [] [] [] | + indent | [] [] [] [] [] [] [] [] | + iso_15924 | [] () [] [] [] | + iso_3166 | [] [] [] () [] [] [] () [] | + iso_3166_2 | () | + iso_4217 | [] [] [] () [] [] [] | + iso_639 | [] [] [] () [] [] [] | + iso_639_3 | | + jwhois | [] [] | + kbd | [] [] [] [] [] | + keytouch | [] [] [] | + keytouch-editor | [] [] [] | + keytouch-keyboa... | [] [] | + klavaro | [] [] [] [] | + latrine | [] () [] | + ld | [] [] [] | + leafpad | [] [] [] [] [] [] [] | + libc | [] [] [] [] [] | + libexif | [] [] () | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] () | + libgphoto2_port | [] () [] | + libgsasl | [] | + libiconv | [] [] [] [] [] [] | + libidn | [] [] [] [] | + lifelines | [] () | + liferea | [] [] [] [] [] | + lilypond | [] [] [] [] | + linkdr | [] [] [] [] | + lordsawar | [] | + lprng | | + lynx | [] [] [] [] | + m4 | [] [] [] [] [] | + mailfromd | | + mailutils | [] | + make | [] [] [] [] | + man-db | | + man-db-manpages | | + minicom | [] [] [] [] [] | + mkisofs | [] | + myserver | | + nano | [] [] [] [] | + opcodes | [] [] [] | + parted | [] [] | + pies | | + popt | [] [] [] [] [] [] | + psmisc | [] [] [] [] | + pspp | [] | + pwdutils | [] | + radius | [] | + recode | [] [] [] [] [] [] [] | + rosegarden | () () () () | + rpm | [] [] [] | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] [] | + sed | [] [] [] [] [] [] [] | + sharutils | [] [] [] [] [] | + shishi | | + skencil | [] () [] | + solfege | [] [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] [] | + sp | [] | + sysstat | [] [] [] [] | + tar | [] [] [] [] [] | + texinfo | [] [] [] | + tin | [] [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] [] | + vice | () () | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] [] | + wget | [] [] [] [] | + wyslij-po | [] | + xchat | [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] [] | + +-------------------------------------------------+ + cs da de el en en_GB en_ZA eo es et eu fa fi + 64 105 117 18 1 8 0 28 89 18 19 0 104 + + fr ga gl gu he hi hr hu hy id is it ja ka kn + +------------------------------------------------+ + a2ps | [] [] [] | + aegis | [] [] | + ant-phone | [] [] | + anubis | [] [] [] | + aspell | [] [] [] [] | + bash | [] [] [] | + bfd | [] [] | + bibshelf | [] [] [] [] | + binutils | [] [] | + bison | [] [] [] | + bison-runtime | [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] | + bombono-dvd | | + buzztard | [] | + cflow | [] [] | + clisp | [] | + coreutils | [] [] [] [] [] | + cpio | [] [] [] | + cppi | [] | + cpplib | [] [] | + cryptsetup | [] [] [] | + dfarc | [] [] | + dialog | [] [] [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] [] [] | + dink | [] | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] | + exif | [] [] [] [] [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] | + flex | [] [] | + freedink | [] [] | + gas | [] [] | + gawk | [] [] [] [] () [] | + gcal | [] | + gcc | [] | + gettext-examples | [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] | + gettext-tools | [] [] [] [] | + gip | [] [] [] [] [] | + gjay | | + gliv | () | + glunarclock | [] [] [] | + gnubiff | () [] () | + gnucash | () () () () [] | + gnuedu | [] [] | + gnulib | [] [] [] [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] | + gpe-aerial | [] [] | + gpe-beam | [] [] [] | + gpe-bluetooth | [] [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] | + gpe-conf | [] [] [] | + gpe-contacts | [] [] [] | + gpe-edit | [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] [] | + gpe-su | [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] | + gpe-timesheet | [] [] [] [] | + gpe-today | [] [] [] [] [] [] | + gpe-todo | [] [] | + gphoto2 | [] [] [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] | + grub | [] [] [] | + gsasl | [] [] [] [] | + gss | [] [] [] [] | + gst-plugins-bad | [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | [] [] [] [] | + gtick | [] [] [] [] | + gtkam | [] [] [] [] [] | + gtkorphan | [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] | + gutenprint | [] [] [] | + hello | [] [] | + help2man | [] | + hylafax | [] | + idutils | [] [] [] [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | () [] [] | + iso_3166 | () [] [] [] [] [] [] [] [] [] [] | + iso_3166_2 | () [] [] [] | + iso_4217 | () [] [] [] [] | + iso_639 | () [] [] [] [] [] [] [] | + iso_639_3 | () [] [] | + jwhois | [] [] [] [] | + kbd | [] [] | + keytouch | [] [] [] [] [] | + keytouch-editor | [] [] [] [] | + keytouch-keyboa... | [] [] [] [] | + klavaro | [] [] | + latrine | [] [] | + ld | [] [] [] | + leafpad | [] [] [] [] [] [] () | + libc | [] [] [] [] | + libexif | | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] [] | + libgphoto2_port | [] [] [] | + libgsasl | [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | [] [] [] | + lifelines | () | + liferea | [] [] [] [] | + lilypond | [] | + linkdr | [] [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] [] [] | + m4 | [] [] [] [] [] | + mailfromd | | + mailutils | [] [] | + make | [] [] [] [] [] [] [] [] | + man-db | [] [] | + man-db-manpages | [] | + minicom | [] [] [] [] | + mkisofs | [] [] [] | + myserver | | + nano | [] [] [] [] [] | + opcodes | [] [] [] | + parted | [] [] [] [] | + pies | | + popt | [] [] [] [] [] [] [] [] | + psmisc | [] [] | + pspp | | + pwdutils | [] [] | + radius | [] [] | + recode | [] [] [] [] [] [] [] | + rosegarden | () () () () | + rpm | [] [] | + rush | | + sarg | [] | + screem | [] [] | + scrollkeeper | [] [] [] | + sed | [] [] [] [] [] [] [] | + sharutils | [] [] [] [] [] [] | + shishi | [] | + skencil | [] | + solfege | [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] | + sp | [] () | + sysstat | [] [] [] [] | + tar | [] [] [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | [] [] | + util-linux-ng | [] [] [] [] [] | + vice | () () () | + vmm | [] | + vorbis-tools | [] | + wastesedge | () () | + wdiff | | + wget | [] [] [] [] [] [] [] | + wyslij-po | [] [] | + xchat | [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] | + +------------------------------------------------+ + fr ga gl gu he hi hr hu hy id is it ja ka kn + 121 53 20 4 8 2 5 53 2 120 5 83 66 0 4 + + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + +-----------------------------------------------+ + a2ps | [] | + aegis | | + ant-phone | | + anubis | [] [] | + aspell | [] | + bash | | + bfd | | + bibshelf | [] [] | + binutils | | + bison | [] | + bison-runtime | [] [] [] [] [] | + bluez-pin | [] [] [] [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] | + cpio | | + cppi | | + cpplib | | + cryptsetup | | + dfarc | [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] | + dink | | + doodle | | + e2fsprogs | | + enscript | | + exif | [] | + fetchmail | | + findutils | | + flex | | + freedink | [] | + gas | | + gawk | | + gcal | | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] | + gettext-tools | [] | + gip | [] [] | + gjay | | + gliv | | + glunarclock | [] | + gnubiff | | + gnucash | () () () () | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | [] | + gold | | + gpe-aerial | [] | + gpe-beam | [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] | + gpe-contacts | [] [] | + gpe-edit | [] | + gpe-filemanager | [] [] | + gpe-go | [] [] [] | + gpe-login | [] | + gpe-ownerinfo | [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] | + gpe-su | [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] | + gpe-timesheet | [] [] | + gpe-today | [] [] [] [] | + gpe-todo | [] [] | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | | + gsasl | | + gss | | + gst-plugins-bad | [] [] | + gst-plugins-base | [] [] | + gst-plugins-good | [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | | + gtick | | + gtkam | [] | + gtkorphan | [] [] | + gtkspell | [] [] [] [] [] [] [] | + gutenprint | | + hello | [] [] [] | + help2man | | + hylafax | | + idutils | | + indent | | + iso_15924 | [] [] | + iso_3166 | [] [] () [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | [] [] | + iso_639 | [] [] | + iso_639_3 | [] | + jwhois | [] | + kbd | | + keytouch | [] | + keytouch-editor | [] | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | [] | + ld | | + leafpad | [] [] [] | + libc | [] | + libexif | | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | | + libidn | | + lifelines | | + liferea | | + lilypond | | + linkdr | | + lordsawar | | + lprng | | + lynx | | + m4 | | + mailfromd | | + mailutils | | + make | [] | + man-db | | + man-db-manpages | | + minicom | [] | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | [] [] [] | + psmisc | | + pspp | | + pwdutils | | + radius | | + recode | | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] | + sed | | + sharutils | | + shishi | | + skencil | | + solfege | [] | + solfege-manual | | + soundtracker | | + sp | | + sysstat | [] | + tar | [] | + texinfo | [] | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] | + wyslij-po | | + xchat | [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +-----------------------------------------------+ + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + 20 5 10 1 12 48 4 2 2 4 24 10 19 3 1 + + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + +---------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] [] | + anubis | [] [] [] | + aspell | [] [] [] [] [] | + bash | [] [] | + bfd | [] | + bibshelf | [] [] | + binutils | [] [] | + bison | [] [] [] | + bison-runtime | [] [] [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] [] | + bombono-dvd | [] () | + buzztard | [] [] | + cflow | [] | + clisp | [] [] | + coreutils | [] [] [] [] [] [] | + cpio | [] [] [] | + cppi | [] | + cpplib | [] | + cryptsetup | [] | + dfarc | [] | + dialog | [] [] [] [] | + dico | [] | + diffutils | [] [] [] [] [] [] | + dink | () | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] [] | + exif | [] [] [] () [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] | + flex | [] [] [] [] [] | + freedink | [] [] | + gas | | + gawk | [] [] [] [] | + gcal | | + gcc | [] | + gettext-examples | [] [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] [] | + gip | [] [] [] [] [] | + gjay | | + gliv | [] [] [] [] [] [] | + glunarclock | [] [] [] [] [] | + gnubiff | [] () | + gnucash | [] () () () | + gnuedu | [] | + gnulib | [] [] [] [] | + gnunet | | + gnunet-gtk | | + gnutls | [] [] | + gold | | + gpe-aerial | [] [] [] [] [] [] [] | + gpe-beam | [] [] [] [] [] [] [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] [] [] [] | + gpe-clock | [] [] [] [] [] [] [] [] | + gpe-conf | [] [] [] [] [] [] [] | + gpe-contacts | [] [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] [] [] [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] [] [] [] [] [] | + gpe-su | [] [] [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] [] [] [] | + gpe-today | [] [] [] [] [] [] [] [] | + gpe-todo | [] [] [] [] [] | + gphoto2 | [] [] [] [] [] [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] | + gramadoir | [] [] | + grep | [] [] [] [] | + grub | [] [] [] | + gsasl | [] [] [] [] | + gss | [] [] [] | + gst-plugins-bad | [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] | + gtkam | [] [] [] [] [] [] | + gtkorphan | [] | + gtkspell | [] [] [] [] [] [] [] [] [] [] | + gutenprint | [] [] | + hello | [] [] [] [] | + help2man | [] [] | + hylafax | [] | + idutils | [] [] [] [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | [] [] [] [] | + iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] | + iso_3166_2 | [] [] [] | + iso_4217 | [] [] [] [] [] [] [] [] | + iso_639 | [] [] [] [] [] [] [] [] [] | + iso_639_3 | [] [] | + jwhois | [] [] [] [] | + kbd | [] [] [] | + keytouch | [] [] [] | + keytouch-editor | [] [] [] | + keytouch-keyboa... | [] [] [] | + klavaro | [] [] | + latrine | [] [] | + ld | | + leafpad | [] [] [] [] [] [] [] [] [] | + libc | [] [] [] [] | + libexif | [] [] () [] | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] | + libgphoto2_port | [] [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | [] [] | + lifelines | [] [] | + liferea | [] [] [] [] [] () () [] | + lilypond | [] | + linkdr | [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] | + m4 | [] [] [] [] [] | + mailfromd | [] | + mailutils | [] | + make | [] [] [] [] | + man-db | [] [] [] | + man-db-manpages | [] [] [] | + minicom | [] [] [] [] | + mkisofs | [] [] [] | + myserver | | + nano | [] [] [] [] | + opcodes | [] [] | + parted | [] [] [] [] | + pies | [] | + popt | [] [] [] [] | + psmisc | [] [] [] | + pspp | [] [] | + pwdutils | [] | + radius | [] [] [] | + recode | [] [] [] [] [] [] [] [] | + rosegarden | () () | + rpm | [] [] [] | + rush | [] [] | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] [] [] [] | + sed | [] [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | [] | + skencil | [] [] | + solfege | [] [] [] [] | + solfege-manual | [] [] [] | + soundtracker | [] | + sp | | + sysstat | [] [] [] [] | + tar | [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] [] | + vice | [] | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] | + wget | [] [] [] [] [] [] [] | + wyslij-po | [] [] [] | + xchat | [] [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] | + +---------------------------------------------------+ + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + 135 10 4 7 105 1 29 61 47 91 3 55 47 8 37 + + sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + +---------------------------------------------------+ + a2ps | [] [] [] [] [] | 27 + aegis | [] | 9 + ant-phone | [] [] [] [] | 9 + anubis | [] [] [] [] | 15 + aspell | [] [] [] | 20 + bash | [] [] | 11 + bfd | [] | 6 + bibshelf | [] [] [] | 16 + binutils | [] [] | 8 + bison | [] [] | 12 + bison-runtime | [] [] [] [] [] [] | 29 + bluez-pin | [] [] [] [] [] [] [] [] | 37 + bombono-dvd | [] | 4 + buzztard | [] | 7 + cflow | [] [] [] | 9 + clisp | | 10 + coreutils | [] [] [] [] | 22 + cpio | [] [] [] [] [] [] | 13 + cppi | [] [] | 5 + cpplib | [] [] [] [] [] [] | 13 + cryptsetup | [] [] | 7 + dfarc | [] | 9 + dialog | [] [] [] [] [] [] [] | 30 + dico | [] | 2 + diffutils | [] [] [] [] [] [] | 30 + dink | | 4 + doodle | [] [] | 7 + e2fsprogs | [] [] [] | 11 + enscript | [] [] [] [] | 17 + exif | [] [] [] | 16 + fetchmail | [] [] [] | 17 + findutils | [] [] [] [] [] | 20 + flex | [] [] [] [] | 15 + freedink | [] | 10 + gas | [] | 4 + gawk | [] [] [] [] | 18 + gcal | [] [] | 5 + gcc | [] [] [] | 7 + gettext-examples | [] [] [] [] [] [] [] | 34 + gettext-runtime | [] [] [] [] [] [] [] | 30 + gettext-tools | [] [] [] [] [] [] | 22 + gip | [] [] [] [] | 22 + gjay | [] | 3 + gliv | [] [] [] | 14 + glunarclock | [] [] [] [] [] | 19 + gnubiff | [] [] | 4 + gnucash | () [] () () | 9 + gnuedu | [] [] | 7 + gnulib | [] [] [] [] | 16 + gnunet | [] | 1 + gnunet-gtk | [] [] [] | 5 + gnutls | [] [] [] | 10 + gold | [] | 4 + gpe-aerial | [] [] [] | 18 + gpe-beam | [] [] [] | 19 + gpe-bluetooth | [] [] [] | 13 + gpe-calendar | [] [] [] [] | 12 + gpe-clock | [] [] [] [] [] | 28 + gpe-conf | [] [] [] [] | 20 + gpe-contacts | [] [] [] | 17 + gpe-edit | [] [] [] | 12 + gpe-filemanager | [] [] [] [] | 16 + gpe-go | [] [] [] [] [] | 25 + gpe-login | [] [] [] | 11 + gpe-ownerinfo | [] [] [] [] [] | 25 + gpe-package | [] [] [] | 13 + gpe-sketchbook | [] [] [] | 20 + gpe-su | [] [] [] [] [] | 30 + gpe-taskmanager | [] [] [] [] [] | 29 + gpe-timesheet | [] [] [] [] [] | 25 + gpe-today | [] [] [] [] [] [] | 30 + gpe-todo | [] [] [] [] | 17 + gphoto2 | [] [] [] [] [] | 24 + gprof | [] [] [] | 15 + gpsdrive | [] [] [] | 11 + gramadoir | [] [] [] | 11 + grep | [] [] [] | 10 + grub | [] [] [] | 14 + gsasl | [] [] [] [] | 14 + gss | [] [] [] | 11 + gst-plugins-bad | [] [] [] [] | 22 + gst-plugins-base | [] [] [] [] [] | 24 + gst-plugins-good | [] [] [] [] [] | 25 + gst-plugins-ugly | [] [] [] [] [] | 29 + gstreamer | [] [] [] [] | 22 + gtick | [] [] [] | 13 + gtkam | [] [] [] | 20 + gtkorphan | [] [] [] | 14 + gtkspell | [] [] [] [] [] [] [] [] [] | 45 + gutenprint | [] | 10 + hello | [] [] [] [] [] [] | 21 + help2man | [] [] | 7 + hylafax | [] | 5 + idutils | [] [] [] [] | 17 + indent | [] [] [] [] [] [] | 30 + iso_15924 | () [] () [] [] | 16 + iso_3166 | [] [] () [] [] () [] [] [] () | 53 + iso_3166_2 | () [] () [] | 9 + iso_4217 | [] () [] [] () [] [] | 26 + iso_639 | [] [] [] () [] () [] [] [] [] | 38 + iso_639_3 | [] () | 8 + jwhois | [] [] [] [] [] | 16 + kbd | [] [] [] [] [] | 15 + keytouch | [] [] [] | 16 + keytouch-editor | [] [] [] | 14 + keytouch-keyboa... | [] [] [] | 14 + klavaro | [] | 11 + latrine | [] [] [] | 10 + ld | [] [] [] [] | 11 + leafpad | [] [] [] [] [] [] | 33 + libc | [] [] [] [] [] | 21 + libexif | [] () | 6 + libextractor | [] | 1 + libgnutls | [] [] [] | 9 + libgpewidget | [] [] [] | 14 + libgpg-error | [] [] [] | 9 + libgphoto2 | [] [] | 8 + libgphoto2_port | [] [] [] [] | 13 + libgsasl | [] [] [] | 13 + libiconv | [] [] [] [] | 21 + libidn | () [] [] | 11 + lifelines | [] | 4 + liferea | [] [] [] | 21 + lilypond | [] | 7 + linkdr | [] [] [] [] [] | 17 + lordsawar | | 1 + lprng | [] | 3 + lynx | [] [] [] [] | 17 + m4 | [] [] [] [] | 19 + mailfromd | [] [] | 3 + mailutils | [] | 5 + make | [] [] [] [] | 21 + man-db | [] [] [] | 8 + man-db-manpages | | 4 + minicom | [] [] | 16 + mkisofs | [] [] | 9 + myserver | | 0 + nano | [] [] [] [] | 21 + opcodes | [] [] [] | 11 + parted | [] [] [] [] [] | 15 + pies | [] [] | 3 + popt | [] [] [] [] [] [] | 27 + psmisc | [] [] | 11 + pspp | | 4 + pwdutils | [] [] | 6 + radius | [] [] | 9 + recode | [] [] [] [] | 28 + rosegarden | () | 0 + rpm | [] [] [] | 11 + rush | [] [] | 4 + sarg | | 1 + screem | [] | 3 + scrollkeeper | [] [] [] [] [] | 27 + sed | [] [] [] [] [] | 30 + sharutils | [] [] [] [] [] | 22 + shishi | [] | 3 + skencil | [] [] | 7 + solfege | [] [] [] [] | 16 + solfege-manual | [] | 8 + soundtracker | [] [] [] | 9 + sp | [] | 3 + sysstat | [] [] | 15 + tar | [] [] [] [] [] [] | 23 + texinfo | [] [] [] [] | 16 + tin | | 4 + unicode-han-tra... | | 0 + unicode-transla... | | 2 + util-linux-ng | [] [] [] [] | 20 + vice | () () | 1 + vmm | [] | 4 + vorbis-tools | [] | 6 + wastesedge | | 2 + wdiff | [] [] | 7 + wget | [] [] [] [] [] | 26 + wyslij-po | [] [] | 8 + xchat | [] [] [] [] [] [] | 36 + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | 60 + xkeyboard-config | [] [] [] [] | 25 + +---------------------------------------------------+ + 84 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + 178 domains 119 1 3 2 0 10 66 50 155 17 97 7 41 2610 + + Some counters in the preceding matrix are higher than the number of +visible blocks let us expect. This is because a few extra PO files are +used for implementing regional variants of languages, or language +dialects. + + For a PO file in the matrix above to be effective, the package to +which it applies should also have been internationalized and +distributed as such by its maintainer. There might be an observable +lag between the mere existence a PO file and its wide availability in a +distribution. + + If May 2010 seems to be old, you may fetch a more recent copy of +this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date +matrix with full percentage details can be found at +`http://translationproject.org/extra/matrix.html'. + +1.6 Using `gettext' in new packages +=================================== + +If you are writing a freely available program and want to +internationalize it you are welcome to use GNU `gettext' in your +package. Of course you have to respect the GNU Library General Public +License which covers the use of the GNU `gettext' library. This means +in particular that even non-free programs can use `libintl' as a shared +library, whereas only free software can use `libintl' as a static +library or use modified versions of `libintl'. + + Once the sources are changed appropriately and the setup can handle +the use of `gettext' the only thing missing are the translations. The +Free Translation Project is also available for packages which are not +developed inside the GNU project. Therefore the information given above +applies also for every other Free Software Project. Contact +`coordinator@translationproject.org' to make the `.pot' files available +to the translation teams. + diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..44c6705 --- /dev/null +++ b/AUTHORS @@ -0,0 +1,3 @@ +Philip A. Nelson +Jason Downs +Sergey Poznyakoff diff --git a/COPYING b/COPYING new file mode 100644 index 0000000..bcdcf5e --- /dev/null +++ b/COPYING @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007, 2011 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..f90b8a4 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,1362 @@ +2011-11-13 Sergey Poznyakoff + + Version 1.10 + + * NEWS: Raise version number. + * configure.ac: Raise version number. + +2011-11-11 Sergey Poznyakoff + + Implement cloexec in gdbm_reorganize. Add test cases. + + * compat/dbmopen.c: Apply O_CLOEXEC to newly created dir + file, if requested. + + * src/gdbmdefs.h (gdbm_file_info) : New member. + * src/gdbmopen.c (gdbm_open): Initialize cloexec member. + * src/gdbmreorg.c (gdbm_reorganize): Propagate cloexec bit + to the new database. + + * tests/.cvsignore: Update. + * tests/cloexec00.at: New test case. + * tests/cloexec01.at: Likewise. + * tests/cloexec02.at: Likewise. + * tests/cloexec03.at: Likewise. + * fdop.c: New auxiliary program. + * g_open_ce: New test program. + * g_reorg_ce: New test program. + * d_creat_ce: New test program. + * tests/Makefile.am: Add new test cases and test programs. + * tests/testsuite.at: Include new test cases. + * doc/gdbm.texinfo: Minor change. + +2011-11-11 Sergey Poznyakoff + + Use SEEK_SET instead of L_SET in all sources. + +2011-11-11 Sergey Poznyakoff + + Support close-on-exec flag for gdbm_open call. + + * src/gdbm.h.in (GDBM_CLOEXEC): New flag. + * src/systems.h [O_CLOEXEC]: Provide a placeholder definition. + + * src/gdbmopen.c (gdbm_open): Honor the GDBM_CLOEXEC flag. + * compat/dbmopen.c (ndbm_open_dir_file0): Mask out open mode + before comparing with GDBM_READER. + Support GDBM_CLOEXEC. + (dbm_open): Translate O_CLOEXEC to GDBM_CLOEXEC. + + * doc/gdbm.texinfo: Document GDBM_CLOEXEC. + + * NEWS: Update. + +2011-11-11 Sergey Poznyakoff + + Fix handling of NDBM databases in read-only mode. + + * compat/dbmopen.c (ndbm_open_dir_file0): Open dir file in + read-only mode if the database is being opened as GDBM_READER. + * tests/dbmcvt.at: New file. + * tests/dbmfetch02.at: New file. + * tests/dbmfetch03.at: New file. + * tests/Makefile.am (TESTSUITE_AT): Add new files. + * tests/testsuite.at: Include new testcases. + +2011-10-05 Sergey Poznyakoff + + Fix bug #150. + + Tolerate I/O operations returning less bytes than expected. Retry I/O + if possible. + + * src/fullio.c: New file. + * src/Makefile.am (libgdbm_la_SOURCES): Add fullio.c + * src/proto.h (_gdbm_full_read) + (_gdbm_full_write): New protos. + * src/gdbmerrno.c (gdbm_errlist): Add entry for GDBM_FILE_EOF. + + * src/bucket.c: Use _gdbm_full_{read|write}. + * src/falloc.c: Likewise. + * src/findkey.c: Likewise. + * src/gdbmopen.c: Likewise. + * src/gdbmstore.c: Likewise. + * src/testgdbm.c: Likewise. + * src/update.c: Likewise. + +2011-10-05 Sergey Poznyakoff + + * src/gdbmopen.c (gdbm_open): Initialize memory used for file + header. This fixes bug #151. + +2011-08-24 Sergey Poznyakoff + + Implement multi-character commands in testgdbm. + + * bootstrap (get_po): Discard output from cmp. + * src/testgdbm.c: Implement multi-character commands. + * doc/gdbm.texinfo: Update. + +2011-08-18 Sergey Poznyakoff + + * bootstrap: Get PO files; create LINGUAS list + * po/.cvsignore: Add LINGUAS. + +2011-08-17 Sergey Poznyakoff + + Make sure errno is preserved, if it can contain details about the + gdbm error. + + * src/gdbmdefs.h (SAVE_ERRNO): New macro. + * src/gdbmopen.c: Use SAVE_ERRNO where it is important to + preserve system errno. + * src/mmap.c: Likewise. + + * doc/gdbm.texinfo: Document which gdbm errors can + be detailed by inspecting the system errno. + +2011-08-17 Sergey Poznyakoff + + Introduce new error code. + + * configure.ac, NEWS: Raise patchlevel to 90. + * src/gdbm.h.in: Enclose entire file in conditional + extern "C". + (GDBM_FILE_STAT_ERROR): New error code. + (_GDBM_MAX_ERRNO): Update. + * src/gdbmerrno.c (gdbm_errlist): Update. + * src/gdbmopen.c: Set GDBM_FILE_STAT_ERROR on fstat + failure. + * src/gdbmreorg.c: Likewise. + * src/mmap.c: Likewise. + * src/systems.h: Include errno.h + * gdbm.texinfo: Document GDBM_FILE_STAT_ERROR. + +2011-08-16 Sergey Poznyakoff + + Minor housekeeping for Gnits compliance. + + * README-alpha: New file. + * README-hacking: New file. + * bootstrap: Update. + +2011-08-16 Sergey Poznyakoff + + Internationalization. + + * Makefile.am (SUBDIRS): Add po. + (EXTRA_DIST): Add build-aux/config.rpath. + * configure.ac (AC_CONFIG_FILES): Add po/Makefile.in. + * bootstrap: New file. + * src/Makefile.am (AM_CPPFLAGS): Define LOCALEDIR + (noinst_HEADERS): Add gettext.h + (LIBADD): New variable. + * src/gettext.h: New file. + * po/.cvsignore: New file. + * po/Makevars: New file. + * po/POTFILES.in: New file. + * src/gdbmdefs.h: Define DEFAULT_TEXT_DOMAIN, _, N_ + Include gettext.h + * src/bucket.c: Add NLS markers. + * src/falloc.c: Likewise. + * src/findkey.c: Likewise. + * src/gdbmerrno.c: Likewise. + * src/gdbmfetch.c: Likewise. + * src/gdbmseq.c: Likewise. + * src/gdbmstore.c: Likewise. + * src/update.c: Likewise. + * src/testgdbm.c: Add NLS markers. + (main): Initialize I18N. + +2011-08-14 Sergey Poznyakoff + + * compat/Makefile.am (libgdbm_compat_la_LIBADD): Link against + libgdbm. Suggested by Adam Sampson. + +2011-08-13 Sergey Poznyakoff + + Improve release checking: use gnits. + + * configure.ac (AM_INIT_AUTOMAKE): Use gnits. + (AC_INIT): Remove extra quoting from around version number + to pacify gnits. + * THANKS: New file. + +2011-08-13 Sergey Poznyakoff + + Verify preprocessor directives. Pass them through cppi to + reflect their nesting level. Affected files: + + * src/flatfile.c + * src/gdbmconst.h + * src/gdbm.h.in + * src/gdbmconst.h + * src/gdbmopen.c + * src/gdbmreorg.c + * src/lock.c + * src/mmap.c + * src/systems.h + * src/testgdbm.c + +2011-08-13 Sergey Poznyakoff + + * NEWS, configure.ac: Version 1.9.1 + +2011-08-12 Sergey Poznyakoff + + Bugfixes (pointed out by Matthew Burgess + ). + + * src/gdbmopen.c: Fix a typo. + * tests/Makefile.am ($(srcdir)/package.m4): Fix improper + dependency. + +2011-08-11 Sergey Poznyakoff + + Release 1.9 + +2011-08-11 Sergey Poznyakoff + + Add testcases for gdbm_setopt. + + * tests/gtopt.c: New file + * tests/.cvsignore: Update. + * tests/setopt00.at: New testcase. + * tests/setopt01.at: New testcase. + * tests/Makefile.am: Build gtopt. Add setopt00.at and setopt01.at. + * tests/testsuite.at: Include setopt00.at and setopt01.at. + +2011-08-11 Sergey Poznyakoff + + New option GDBM_GETDBNAME. + + * src/gdbm.h.in (GDBM_GETDBNAME): New option. + * src/gdbmsetopt.c (gdbm_setopt): Handle GDBM_GETDBNAME. + * doc/gdbm.texinfo (Options): Document GDBM_GETDBNAME. + +2011-08-11 Sergey Poznyakoff + + Improve gdbm_setopt interface. + + * src/gdbm.h.in (GDBM_OPENMASK): New constant. + * src/gdbmconst.h: Remove constants duplicated in + gdbm.h.in. + * src/gdbmdefs.h (gdbm_file_info) + : Replace with a single member: memory_mapping. + All callers updated. + (GDBM_SETCACHESIZE,GDBM_SETSYNCMODE) + (GDBM_SETCENTFREE,GDBM_SETCOALESCEBLKS): New option names. + (GDBM_SETMMAP,GDBM_GETMMAP,GDBM_GETFLAGS) + (GDBM_GETCACHESIZE,GDBM_GETSYNCMODE,GDBM_GETCENTFREE) + (GDBM_GETCOALESCEBLKS,GDBM_GETMAXMAPSIZE): New option codes. + * src/gdbmsetopt.c: Implement new options. + * doc/gdbm.texinfo: Document new options. + +2011-08-11 Sergey Poznyakoff + + Improve memory mapping support. + + The new code is more flexible and performs better when + lots of inserts are being made (e.g. when populating the + database with new data). + + * src/gdbm.h.in (GDBM_SETMAXMAPSIZE): New constant. + * src/gdbmconst.h (SIZE_T_MAX): New define. + * src/gdbmdefs.h (gdbm_file_info) : Change type + to size_t. + : New member. + : Remove. + * src/gdbmopen.c: Fix a typo. + (gdbm_open): Initialize new members. + (_gdbm_init_cache): Second argument is size_t. + * src/gdbmsetopt.c (gdbm_setopt): Optval argument is void*. + Handle GDBM_SETMAXMAPSIZE. + Improve error checking. + * src/mmap.c (_GDBM_IN_MAPPED_REGION_P): Fix comparison with + the lower bound. + (_GDBM_NEED_REMAP): Return true if mapped_region is NULL. + (SUM_FILE_SIZE): Rewrite. + (_gdbm_mapped_unmap): Don't call msync. + (_gdbm_internal_remap): Take 2 arguments, the second one + giving the new mapped size. + Unmap the region prior to remapping it. + Always pass NULL as the argument to mmap. + (_gdbm_mapped_remap): Rewrite the logic. Change semantics of the + third argument. All uses updated. + (_gdbm_mapped_init): Reflect the above changes. + (_gdbm_mapped_read,_gdbm_mapped_write): Use mmap_inited to decide + whether to use mmap, because mapped_region can be reset to zero + by another functions (namely, _gdbm_mapped_lseek). + Reset mmap_inited to FALSE, if _gdbm_mapped_remap fails. + (_gdbm_mapped_lseek): Rewrite offset computations. Invalidate + the mapped region. + * src/proto.h (_gdbm_init_cache): Change prototype. + * src/update.c (write_header, _gdbm_end_update): Remove checks + for dbf->mapped_region. + * tests/gtload.c: Implement the -maxmap option (set maximal + mapped memory size). + + * doc/gdbm.texinfo: Document GDBM_SETMAXMAPSIZE. + +2011-08-09 Sergey Poznyakoff + + Update the docs. + + * doc/gdbm.texinfo: Document compatibility functions, + provide more cross-references. + +2011-08-09 Sergey Poznyakoff + + Implement dbm_error and dbm_clearerr. + + * compat/ndbm.h (__gdbm_error_to_ndbm): New macro + (dbm_error,dbm_clearerr): Provide prototypes instead of + the macros. + (DBM) <_dbm_errno>: New member. + * compat/dbmerr.c: New file. + * compat/Makefile.am (NDBM_CF): Add dbmerr.c + * compat/dbmdelete.c: Make sure _dbm_errno reflects the + actual error state. + * compat/dbmfetch.c: Likewise. + * compat/dbmseq.c: Likewise. + * compat/dbmstore.c: Likewise. + +2011-08-08 Sergey Poznyakoff + + Provide test group descriptors in the testsuite. + + * tests/atlocal.in (XFAILFILE): Remove. + * tests/version.at: Don't create XFAILFILE. + * tests/testsuite.at: Add test group banners + * tests/dbmcreate00.at (AT_SETUP): Change description. + * tests/dbmdel00.at: Likewise. + * tests/dbmdel01.at: Likewise. + * tests/dbmdel02.at: Likewise. + * tests/dbmfetch00.at: Likewise. + * tests/dbmfetch01.at: Likewise. + +2011-08-07 Sergey Poznyakoff + + * src/testgdbm.c: Change internal command invocation + mechanism: the begin handler (if provided) initializes + the invocation and computes the expected number of + output lines. If it is greater than the screen size + the pager is enabled. End handler (if supplied) cleans + up after the invocation. + + Always use error() for diagnostics. + +2011-08-06 Sergey Poznyakoff + + * doc/Config: New file. + * doc/gendocs_template: Rewrite for the new site layout. + + * Makefile.am (DISTCHECK_CONFIGURE_FLAGS): New variable. + Force the use of --enable-libgdbm-compat on distcheck stage. + + * compat/ndbm.h (DBM) : New member. + * src/version.c (gdbm_version_cmp): New function. + * compat/dbmclose.c (dbm_close): Close dirfd. + * compat/dbmdirfno.c (dbm_dirfno): Return dirfd. + * compat/dbmopen.c (dbm_open): Instead of linking + pag to dir, create a separate dir file with the version + information in it. When opening an existing db in + write mode, detect if it has pag linked to dir. If so, + break the link and recreate the dir file in new format. + This allows GDBM to cooperate with the applications which + lock both pag and dir files. + * doc/gdbm.texinfo: Document gdbm_version_cmp. + * NEWS: Update. + +2011-08-05 Sergey Poznyakoff + + * configure.ac: Require latest autotools. Enable silent mode. + * NEWS: Convert to the standard GNU outline format. Add entry + for 1.9. + +2011-08-05 Sergey Poznyakoff + + * configure.ac: Require latest autotools. Enable silent mode. + * NEWS: Convert to the standard GNU outline format. Add entry + for 1.9. + +2011-08-05 Sergey Poznyakoff + + * tests/version.at: Update. + * tests/Makefile.am: Define AT_PACKAGE_VERSION_MAJOR, + AT_PACKAGE_VERSION_MINOR, and AT_PACKAGE_VERSION_PATCH. + * src/lock.c: Shut the gcc warning. + * doc/gdbm.texinfo: Minor fixes. + * src/testgdbm.c (error): Bugfix. + +2011-08-05 Sergey Poznyakoff + + * src/global.c: Remove. + * src/extern.h: Remove. + * src/Makefile.am: Remove extern.h and global.c + * src/flatfile.c: Don't include extern.h + * src/gdbmreorg.c: Likewise. + * src/lock.c: Likewise. + * src/testgdbm.c: Likewise. + * src/gdbmerrno.c (gdbm_errno): New declaration (from + global.c) + + + * compat/dbm-priv.h: New file. + * compat/dbm.h: New file. + * compat/ndbm.h: New file. + * compat/Makefile.am (include_HEADERS): Add dbm.h and ndbm.h + (noinst_HEADERS): Add dbm-priv.h + * compat/close.c: Rewrite using ndbm interface. + * compat/dbminit.c: Likewise. + * compat/delete.c: Likewise. + * compat/fetch.c: Likewise. + * compat/seq.c: Likewise. + * compat/store.c: Likewise. + + * compat/dbmclose.c: Include nbdm.h. + Use the new DBM declaration. + * compat/dbmdelete.c: Likewise. + * compat/dbmdirfno.c: Likewise. + * compat/dbmfetch.c: Likewise. + * compat/dbmopen.c: Likewise. + * compat/dbmpagfno.c: Likewise. + * compat/dbmrdonly.c: Likewise. + * compat/dbmseq.c: Likewise. + * compat/dbmstore.c: Likewise. + + * tests/Makefile.am: Add new files. + * tests/atlocal.in: Conditionally define COMPAT. + + * tests/create00.at: Update keywords. + * tests/delete00.at: Likewise. + * tests/delete01.at: Likewise. + * tests/delete02.at: Likewise. + * tests/fetch00.at: Likewise. + * tests/fetch01.at: Likewise. + + * tests/gtdel.c: Include progname.h instead of declaring + canonical_progname. + * tests/gtdump.c: Likewise. + * tests/gtfetch.c: Likewise. + * tests/gtload.c: Likewise. + * tests/gtver.c: Likewise. + + * tests/testsuite.at (AT_COMPAT_PREREQ): New macro. + Add compat test cases. + + * tests/dtload.c: New file. + * tests/dtdump.c: New file. + * tests/dtdel.c: New file. + * tests/dbmcreate00.at: New test case. + * tests/dbmfetch00: Likewise. + * tests/dbmfetch01: Likewise. + * tests/dbmdel00.at: Likewise. + * tests/dbmdel01.at: Likewise. + * tests/dbmdel02.at: Likewise. + +2011-08-04 Sergey Poznyakoff + + * README: Update. + * doc/gdbm.3: Update. + +2011-08-03 Sergey Poznyakoff + + * tests/gtver.c: New file. + * tests/Makefile.am (check_PROGRAMS): Add gtver. + * tests/.cvsignore: Update. + * tests/version.at: Use gtver instead of testgdbm. + +2011-08-03 Sergey Poznyakoff + + * src/gdbm.proto: Remove. + * src/gdbm.proto2: Remove. + * src/gdbmerrno.h: Remove. + * src/gdbm.h.in: New file. + * Makefile.am (dist-hook): Remove destination file before + copying over it. + * configure.ac: Define Major,Minor numbers and Patchlevel + separately. + (GDBM_VERSION_MAJOR,GDBM_VERSION_MINOR) + (GDBM_VERSION_PATCH): New substitution variables. + * src/Makefile.am: Remove rules for building gdbm.h. + It is now created by configure. + (noinst_HEADERS): Install gdbm.h + (EXTRA_DIST): Distribute gdbm.h.in. + + * src/flatfile.c: Include arpa/inet.h and gdbm.h. + * src/gdbmerrno.c: Include gdbm.h. + * src/version.c: Include gdbm.h. + (gdbm_version_number): New global variable. + + * doc/gdbm.texinfo: Document gdbm_version_number and + GDBM_VERSION_* macros. + + * src/gdbmopen.c: Remove unused variables, fix format specs. + * src/testgdbm.c: Remove unused variables, fix format specs. + +2011-08-03 Sergey Poznyakoff + + * Makefile.am (dist-hook): Replace /*@DIST_DATE@*/ with + the actual distribution date. + * src/version.c (gdbm_version): Update automatically. + +2011-08-03 Sergey Poznyakoff + + * (all files): Update copyright headers. + +2011-08-03 Sergey Poznyakoff + + * doc/Makefile.am (check-fixmes): New rule. + * doc/gdbm.texinfo: Document flat format and related + functions. + + * src/flatfile.c: Minor changes. + * src/gdbmerrno.c (gdbm_errlist): Indicate the size of + array and document its entries to minimize the possibility + of errors when editing it. + * src/gdbmerrno.h (gdbm_errlist): New prototype. + +2011-08-03 Sergey Poznyakoff + + * src/gdbmdefs.h (struct gdbm_file_info) : Remove + the static qualifier. + +2011-08-03 Sergey Poznyakoff + + * src/gdbm.proto2: Remove a leftover __P wrapper. + * src/gdbmsetopt.c (gdbm_setopt): Avoid coredumps on NULL + optval. + + * doc/.cvsignore: Update. + * doc/Makefile.am: Rewrite. + * doc/gdbm.texinfo: Revise. + * doc/gendocs_template: New file. + * doc/untabify.el: New file. + +2011-08-02 Sergey Poznyakoff + + * tests/.cvsignore: Update. + * tests/Makefile.am: Add new tests. + * tests/testsuite.at: Likewise. + * tests/gtdump.c: Minor fix. + * tests/gtfetch.c: Likewise. + * tests/delete00.at: New file. + * tests/delete01.at: New file. + * tests/delete02.at: New file. + * tests/gtdel.c: New file. + + * Makefile.am (SUBDIRS): Add tests. + * configure.ac: Initialize testsuite. + * src/testgdbm.c: Minor fixes. + * tests/Makefile.am: New file. + * tests/atlocal.in: New file. + * tests/create00.at: New file. + * tests/fetch00.at: New file. + * tests/fetch01.at: New file. + * tests/gtdump.c: New file. + * tests/gtfetch.c: New file. + * tests/gtload.c: New file. + * tests/num2word.c: New file. + * tests/testsuite.at: New file. + + * tests/version.at: New file. + + * .cvsignore: Update. + * compat/.cvsignore: Update. + * doc/.cvsignore: Update. + * export/.cvsignore: Update. + * src/.cvsignore: Update. + +2011-08-01 Sergey Poznyakoff + + * compat/dbminit.c: Remove useless include. + * compat/dbmopen.c: Likewise. + +2011-08-01 Sergey Poznyakoff + + * src/testgdbm.c (main): Support --help and --version for + the sake of make distcheck. + +2011-08-01 Sergey Poznyakoff + + * src/gdbm.proto: Remove the legacy __P stuff. + +2011-08-01 Sergey Poznyakoff + + * Makefile.am (ACLOCAL_AMFLAGS): New variable. + * configure.ac: Use AM_INIT_AUTOMAKE with arguments. + + * src/gdbm.proto (GDBM_FILE): Change typedef. + * src/gdbmdefs.h: Include gdbm.h + (datum): Remove duplicate declaration. + (gdbm_file_info): Change to struct gdbm_file_info + + * src/proto.h: Use GDBM_FILE instead of gdbm_file_info *. + Remove duplicate declarations. + + * src/gdbmopen.c: Use GDBM_FILE instead of gdbm_file_info *. + (gdbm_open): Fix signature to match global declaration. + + * compat/dbmclose.c: Use GDBM_FILE instead of gdbm_file_info *. + * compat/dbmdirfno.c: Likewise. + * compat/dbmfetch.c: Likewise. + * compat/dbmopen.c: Likewise. + * compat/dbmpagfno.c: Likewise. + * compat/dbmrdonly.c: Likewise. + * compat/dbmseq.c: Likewise. + * compat/dbmstore.c: Likewise. + * src/bucket.c: Likewise. + * src/extern.h: Likewise. + * src/falloc.c: Likewise. + * src/findkey.c: Likewise. + * src/flatfile.c: Likewise. + * src/gdbmclose.c: Likewise. + * src/gdbmdelete.c: Likewise. + * src/gdbmexists.c: Likewise. + * src/gdbmfdesc.c: Likewise. + * src/gdbmfetch.c: Likewise. + * src/gdbmreorg.c: Likewise. + * src/gdbmseq.c: Likewise. + * src/gdbmsetopt.c: Likewise. + * src/gdbmstore.c: Likewise. + * src/gdbmsync.c: Likewise. + * src/global.c: Likewise. + * src/lock.c: Likewise. + * src/mmap.c: Likewise. + * src/testgdbm.c: Likewise. + * src/update.c: Likewise. + +2009-01-03 Sergey Poznyakoff + + * configure.ac: Update bug-reporting address. + * doc/gdbm.texinfo: Likewise. + * INSTALL, doc/version.texi: Remove automatically generated files. + +Wed Dec 3 19:29:25 PST 2008 Jason Downs (downsj@downsj.com) + + * src/lock.c, src/gdbm.proto, src/proto.h: Disabled/removed + gdbm_locked() for now, it's not needed. + +Sun Nov 30 16:48:29 PST 2008 Jason Downs (downsj@downsj.com) + + * src/lock.c: Check errno to see if a lock failed because it's already + locked. Add external gdbm_locked() routine to return the + status of locking. Move lock type to the dbf. + * src/gdbmdefs.h: Move lock type to the dbf. + * src/gdbm.proto: Add gdbm_export(), gdbm_import(), and gdbm_locked(). + +2008-11-30 Sergey Poznyakoff + + * src/lock.c: Remove flock/flock64 distinction. + +Sat Nov 29 23:22:24 PST 2008 Jason Downs (downsj@downsj.com) + * configure.ac: Add test for lockf. + + * src/lock.c: New file, adds _gdbm_unlock_file() and + _gdbm_lock_file() routines. These attempt to use flock(), + lockf(), and fcntl() locking. + * src/proto.h: Add new prototypes. + * src/systems.h: Remove file locking macros. + * src/gdbmopen.c: Rewrite locking code, use _gdbm_lock_file(). + * src/gdbmclose.c, src/gdbmreorg.c: Use _gdbm_unlock_file(). + +Sat Nov 29 21:19:32 PST 2008 Jason Downs (downsj@downsj.com) + * configure.ac: Add test for sys/termios.h + + * src/systems.h: Add macros for Solaris-style 64bit fcntl locks. + * src/testgdbm.c: Add support for opening files without locking. + Add support for opening files without mmap. + Add sys/termios.h include and add check for TIOCWINSZ. + + * export/export.c: Add support for opening files without locking. + +Mon Oct 29 15:14:53 EET 2007 Sergey Poznyakoff (gray@gnu.org.ua) + + * configure.ac (AC_INIT): Add bug-reporting email. + * gdbm.texinfo: Use values.texi for version and edition number and + date. + Document testgdbm and gdbmexport. + Remove obsolete chapter describing conv2gdbm. + + * export/export.c: Fix check for argc. + Take name of the output file from the second argument. + Accept -h and -v command line options. + + * src/Makefile.am (noinst_PROGRAMS): move to bin_PROGRAMS. + * src/flatfile.c (gdbm_export): Add missing break. + * src/gdbmreorg.c (gdbm_reorganize): Call _gdbm_mapped_init if + required. + * src/testgdbm.c: Improve usage and version output to comply to + standards.texi. + Allow to operate on non-nul-terminated ascii data: + (key_z, data_z): New variables. + (key_z_handler, data_z_handler, status_handler): New handlers - + commands 'z', 'Z' and 'S' + All functions using key_data and data_data updated accordingly + (read_from_file): 'r' command takes an optional second arg. + (print_cache_handler): Use pager. + (page_data): Ignore pager for non-interactive usage. + +Sun Oct 28 15:50:53 PDT 2007 Jason Downs (downsj@downsj.com) + + * configure.ac: Add options for gdbmexport. + * export/Makefile.am, export/export.c: New files, stand alone flat + file exporter. + * COPYING, all source files: Update to GPLv3. + * src/Makefile.ac, compat/Makefile.ac: Move gdbm_compat to compat dir. + * compat: New directory, populate with [n]dbm files. + * src/Makefile.ac: Remove getopt.h. + * testgdbm.c, conv2gdbm.c: Remove getopt.h. + * configure.ac: Remove getopt. + * getopt.h, getopt.c: Remove. + +Fri Oct 26 07:43:18 PDT 2007 Sergey Poznyakoff (gray@gnu.org.ua) + + * src/Makefile.am (noinst_PROGRAMS): Remove testdbm, testndbm, + and conv2gdbm + * src/gdbmreorg.c (gdbm_reorganize): Call _gdbm_mapped_unmap + * src/testgdbm.c: Redo command handling. Expect arguments to + follow the command, otherwise prompt for them. + +Thu Oct 25 09:36:51 PDT 2007 Sergey Poznyakoff (gray@gnu.org.ua) + + * src, doc: New directories + * *.[ch], gdbm.proto, gdbm.proto2: Move to src + * gdbm.texi, gdbm.3: Move to doc + * configure.in: Rename to configure.ac, switch to deep structure + * build-aux: Auxiliary dir for autoconf stuff + * Makefile.am, src/Makefile.am, doc/Makefile.am: New file + + * src/mmap.c (_gdbm_mapped_remap): Bugfix. + * src/testgdbm.c: New commands '<' - read entries from file and store, + and 'l' - list entire database + +Tue Oct 23 19:19:36 PDT 2007 Jason Downs (downsj@downsj.com) + + * update.c: Force sync if using mmap. + + * gdbmclose.c: Unmap file. + + * gdbmopen.c: Initialize mmap. + + * gdbmdefs.h: Finish adding mmap support. + + * Makefile.in: Add mmap.c. + + * mmap.c: New mmap() i/o routines, from Sergey Poznyakoff + . + +Thu Oct 18 18:16:26 PDT 2007 + + * gdbmdefs.h: Convert a bunch of flags to bit fields. + + * gdbmconst.h, gdbm.proto, gdbm.proto2: Add GDBM_NOMMAP and clean up. + + * gdbmerrno.c, gdbmerrno.h: New errnos. + + * gdbmconst.h, gdbmdefs.h, gdbmopen.c: Implement new magic number(s). + + * bucket.c, falloc.c, findkey.c, gdbmopen.c, gdbmstore.c, update.c: + lseek() becomes __lseek(). + + * bucket.c, falloc.c, gdbmopen.c, gdbmstore.c, update.c: write() + becomes __write(). + + * bucket.c, falloc.c, findkey.c, gdbmopen.c: read() becomes __read(). + + * gdbmclose.c, gdbmopen.c, gdbmreorg.c, gdbmsync.c, update.c: fsync() + becomes __fsync(). + + * systems.h: New I/O macros. + + * Makefile.in: Library version 4, remove BINOWN/BINGRP. + + * autoconf.h.in, configure: Regenerate. + + * aclocal.m4, config.guess, config.sub, ltmain.sh: Update. + + * systems.h, gdbmfetch.c, gdbmopen.c, gdbmseq.c, gdbmstore.c, + findkey.c: Switch to memcpy() and memcmp(). + + * configure.in: Add mmap() support, sizeof off_t check, remove bcopy. + + * proto.h, gdbmopen.c, update.c: Fatal function now takes a + const char *. + + * All .h and .c files: ANSI function declarations, remove __P macros. + Also minor style fixes. + +Tue Oct 15 15:00:11 PDT 2002 Jason Downs (downsj@downsj.com) + + * samp1.cc: Remove. + + * gdbm.3, gdbm.texinfo: 1.8.3. + + * version.c: Version 1.8.3., modernize string (release date is in + American format). + + * gdbmreorg.c: Remove small memory leak. + + * Makefile.in: Use more subs from configure, remove mention of SunOS. + Add support for spec'ing an install time prefix via INSTALL_ROOT. + + * INSTALL: Remove extra text from top. + + * config.guess, config.sub: Update to latest versions. + + * autoconf.h.in: Regenerate. + + * configure.in: Modernize. + + * systems.h: HAVE_ST_BLKSIZE -> HAVE_STRUCT_STAT_ST_BLKSIZE. + +Fri Sep 27 16:12:44 PDT 2002 Jason Downs (downsj@downsj.com) + + * Makefile.in: Remove `info' target from all, since we don't even + bother installing the one we built anyway. + + * Fix a few checks against dbf.read_write. + +Wed Sep 25 15:19:00 PDT 2002 Jason Downs (downsj@downsj.com) + + * Makefile.in: Remove the dbm and ndbm routines from the main + library, moving them to gdbm_compat. install-compat now + installs the compat headers and the library. Increment the + MAJOR number of the shared library due to the removal of + the compat functions. + + * gdbm.3, gdbm.texinfo, version.c: 1.8.1; note gdbm_compat. + + * proto.h: Change _gdbm_fatal() to void. + + * update.c(_gdbm_fatal): Change function declaration to void. + + * update.c(_gdbm_fatal): Change default exit status to 1. + + * gdbmopen.c(gdbm_open): Remove setting of flags since we always check + it against the mask. + + * testdbm.c, testndbm.c: Added stdlib.h inclusions. + + * falloc.c(push_avail_block): Fixed extremely rare case where the + header avail table could fill up, causing us to over flow the + table, corrupting memory, and eventually crashing. Also forced + merging of blocks within the scope of this routine (possibly + should force them whenever the header avail table is being used). + + * gdbmerrno.c: Fix error count, there are more than 18. + + * gdbmerrno.h: Fix typo; GDBM_OPT_ILLEGAL is 20. + + * gdbmopen.c: Fix typo; s/GDBM_OPENMASK/GDBM_WRITER/. + +Tue May 18 19:25:25 PDT 1999 Jason Downs (downsj@downsj.com) + + * gdbm.3, gdbm.texinfo: Update for 1.8. + + * Makefile.in, configure.in: Switch to using libtool, but without + automake. + + * aclocal.m4, config.guess, config.sub, ltconfig, ltmain.sh: New + files (libtool 1.2). + +Wed May 12 01:26:15 PDT 1999 Jason Downs (downsj@downsj.com) + + * gdbmopen.c, gdbmclose.c, gdbmreorg.c: check file_locking before + calling locking macros; add support for setting GDBM_NOLOCK in + gdbm_open(). + + * gdbmdefs.h: add file_locking flag to gdbm_file_info. + + * gdbmconst.h, gdbm.proto: add GDBM_NOLOCK flag. + + * gdbmfdesc.c: new file, adds external gdbm_fdesc() routine. + + * gdbm.proto, gdbm.proto2: clean up, use __P, and compress. + + * gdbmerrno.h: kill the enum, add defines for errors. + + * gdbmsetopt.c, testgdbm.c: support GDBM_SYNC/GDBM_SYNCMODE. + + * gdbmopen.c: gdbm_open() now DEFAULTS to ``fast mode''; use + GDBM_SYNC to turn it off. GDBM_FAST is obsolete and ignored. + + * gdbmconst.h: add GDBM_SYNC and GDBM_SYNCMODE. + + * proto.h, various source files: switch _ARGS to __P. + + * systems.h, various source files: kill word_t, just use int + everywhere. + + * configure.in, autoconf.h.in: remove alloca() goo and modernize. + + * many source files: replace all instances of alloca() with real + malloc()s and free()s. + + * update.c: don't deref NULL in _gdbm_fatal(), and don't use stdio. + +[ The following are entries revived from a dead experimental branch. ] + +Tue Nov 1 00:35:11 1994 Jason Downs (downsj@downsj.com) + + * gdbmopen.c (gdbm_open): actually initialize central_free and + coalesce_blocks. + + * gdbmdefs.h: added coalesce_blocks. these should've been bitmapped. + oh well. + + * falloc.c (various routines): made block merging an option. + + * gdbmsetopt.c (gdbm_setopt): added GDBM_COALESCEBLKS option. + + * gdbmconst.h: added GDBM_COALESCEBLKS option. + +Fri Jun 3 09:45:19 1994 Jason Downs (downsj@downsj.com) + + * falloc.c (_gdbm_free): if central_free is set, all blocks are + put into the header. + + * gdbmsetopt.c (gdbm_setopt): add GDBM_CENTFREE case. + + * gdbmdefs.h, gdbmconst.h, gdbm.proto: add central free option. + +Fri Jun 3 05:57:36 1994 Jason Downs (downsj@downsj.com) + + * falloc.c (pop_avail_block): merge block with header, instead + of replace, since header may not be empty any longer. + + * falloc.c (_gdbm_alloc): pop a block off the stack when the + current header is half empty, instead of zero. + +Fri Jun 3 05:11:33 1994 Jason Downs (downsj@downsj.com) + + * gdbmstore.c (gdbm_store): don't alloc new disk if we're replacing + and the records are the same size. suggested by phil a long time + ago. + +Fri Jun 3 03:47:46 1994 Jason Downs (downsj@downsj.com) + + * falloc.c (_gdbm_put_av_elem): allow adjacent blocks to be + merged. inspired by the enhancement by Tim Howes. + +Thu Jun 2 22:15:19 1994 Jason Downs (downsj@downsj.com) + + * Makefile.in: add installation mode, owner, and group. + +Thu Jun 2 04:24:58 1994 Jason Downs (downsj@downsj.com) + + * Makefile.in: run mkinstalldirs before installing files. + + * mkinstalldirs: new file. + +[ End of revived entries. ] + +Thu May 19 15:50:04 1994 Jason Downs (downsj@downsj.com) + + * NEWS, README: update to 1.7.3. + + * gdbm.texinfo: update to 1.7.3, slight fixes. + + * gdbm.3: update to 1.7.3, slight reformat. + +Thu May 19 14:45:51 1994 Jason Downs (downsj@downsj.com) + + * gdbmconst.h: removed the header magic numbers from this + branch. + + * version.c: added an include of autoconf.h, updated version + + * gdbm.proto: added a define for GDBM_FASTMODE. + +Sun May 15 02:39:48 1994 Jason Downs (downsj@downsj.com) + + * gdbm.3, gdbm.texinfo: updates for 1.7.2 + + * README, NEWS, version.c: update for 1.7.2 + + * Makefile.in: removed files, changed (drastically) how the + package compiles and installs. + + * bytewise.c, bytewise.h: removed from this branch. + +Wed Mar 23 00:44:43 1994 Jason Downs (downsj@downsj.com) + + * extern.h: removed bogus (old) function declarations. + +Mon Mar 14 01:37:09 1994 Jason Downs (downsj@downsj.com) + + * Makefile.in: added new files. + + * bytewise.c, bytewise.h: new portable byte order conversion + package; supports 64bit longs/16bit ints. + +Sun Mar 13 22:56:10 1994 Jason Downs (downsj@downsj.com) + + * gdbmsetopt.c, gdbmconst.h: added GDBM_FASTMODE option. + + * falloc.c: taught _gdbm_alloc() about the header avail table. + hopefully, this will fix the bloating problem. i dunno, though, + as i've never had that problem, myself. + +Sun Dec 26 05:17:04 1993 Jason Downs (downsj@downsj.com) + + * version.c: made gdbm_version const. + + * gdbmerrno.c: made gdbm_strerror() and it's array const. + + * various files: general clean up, reformating of code. + + * systems.h: put inside of a conditional. + + * configure.in, autoconf.h.in: added check for . + + * systems.h: added a default define of SEEK_SET. + + * bucket.c, gdbmopen.c, gdbmseq.c, gdbmdelete.c, gdbmdefs.h: + cleaned up some uses of word_t. + +Tue Nov 16 03:11:56 1993 Jason Downs (downsj@downsj.com) + + * gdbm.3, gdbm.texinfo: updated versions to 1.3 for release + + * version.c, README, NEWS: updated versions to 1.7.1 for release + +Sun Nov 14 17:21:03 1993 Jason Downs (downsj@downsj.com) + + * Makefile.in: added $(srcdir) to a few file references. + +Sat Nov 13 13:56:37 1993 Jason Downs (downsj@downsj.com) + + * gdbm.3, gdbm.texinfo: added new gdbm_firstkey()/gdbm_nextkey() + documentation. + + * gdbmopen.c: added SGI alloca patch. + + * Makefile.in: changed installation prefix semantics. + +Sat Nov 13 01:52:31 1993 Jason Downs (downsj@downsj.com) + + * various source: redid the AIX alloca declaration. any new files + that call alloca will have to start with the same header. + + * all source, configure.in, Makefile.in: switched over to using + autoconf.h, rather than packing all of the autoconf defs into + the DEFS line. + + * autoconf.h.in: new file. + + * Makefile.in: changed rule for tndbm.o, hopefully making it more + portable. + + * alloca.c: added inclusion of stdlib.h + +Fri Nov 12 13:11:03 1993 Jason Downs (downsj@downsj.com) + + * Makefile.in, configure.in: fixed getop related bugs. + + * systems.h: moved sys/types.h include to top. + +Wed Nov 3 17:18:59 1993 Jason Downs (downsj@downsj.com) + + * version.c: changed version to 1.7, for release. + + * gdbmdefs.h: Moved all system includes to systems.h. + +Sun Oct 31 02:50:12 1993 Jason Downs (downsj@downsj.com) + + * version.c: changed version number to 1.7alpha. + + * gdbm.texinfo: updated to reflect new routines and changes. + + * getopt.c, getopt.h: Added the GNU getopt.c to the dist, for + compilation of testgdbm and conv2gdbm on machines without getopt(). + + * various source files: changed all appropiate occurances of 'long' + to type 'off_t'. Added off_t check to configure.in. + + * gdbm.3: updated to reflect new routines and changes. + +Sat Oct 30 05:20:45 1993 Jason Downs (downsj@downsj.com) + + * testgdbm.c: Added support for bucket cache and block sizes, + adding -c, -b and -g flags. Must use -g to specify the file + name, now. + + * bucket.c, gdbmopen.c, gdbmclose.c, gdbmreorg.c, update.c, + gdbmconst.h, gdbmdefs.h: Implemented dynamic, delayed + initialization, bucket cache. New routine: _gdbm_init_cache(). + + * proto.h, gdbmerrno.c, gdbmerrno.h: Added gdbm_setopt() errors + and prototypes. + + * gdbmsetopt.c: New file, implements the gdbm_setopt() routine. + + * testgdbm.c, testndbm.c, testdbm.c, conv2gdbm.c: cleaned up + compiler warnings. + + * update.c: repaired declarations and added prototypes for + static routines, repaired declaration of _gdbm_fatal(). + + * falloc.c: repaired declarations and added prototypes for + static routines. + + * gdbmstore.c: commented out unsed variables in gdbm_store(). + + * proto.h: added prototypes for _gdbm_read_entry(), + _gdbm_find_key(), and gdbm_sync(). + + * bucket.c, proto.h: changed _gdbm_get_bucket() and + _gdbm_write_bucket() over to type void. + +Sat Oct 30 00:56:24 1993 Jason Downs (downsj@downsj.com) + + * gdbmerrno.c, gdbmexists.c, close.c, dbmrdonly.c: New files, + adding the routines gdbm_strerror(), gdbm_exists(), and for + better compatibility with the old dbm/ndbm libraries, the + dbmclose() and dbm_rdonly() routines. + + * various headers: Added prototypes for the new routines, and + rearranged how gdbm.h is generated. + +Fri Oct 29 07:02:41 1993 Jason Downs (downsj@downsj.com) + + * README: split into README, INSTALL, and NEWS. INSTALL + includes more tips on compiling. NEWS contains the 'short form' + ChangeLog. + + * Makefile.in, configure.in: Redid parts of the autoconf + stuff, and repaired many bugs. + + * systems.h: Repaired the alloca declarations, among other + things. + + * various source files: changed all relevant usage of type + 'long' to type 'word_t', which will always be 32bits wide. + 'word_t' is defined in systems.h. + +Fri Jul 30 13:27:24 1993 Phil Nelson (phil@cs.wwu.edu) + + * findkey.c: Added a check of elem_loc == -1 in determining if + the data cache held the item being looked for. + +Tue Jul 20 13:08:47 1993 Phil Nelson (phil at cs.wwu.edu) + + * gdbm.texinfo: Fixed some errors. + + * Makefile.in: Fixed some errors. + + * version.c: Set version to 1.6 for release. + +Mon Jul 19 15:02:40 1993 Phil Nelson (phil at cs.wwu.edu) + + * COPYING: Replaced Version 1 with Version 2. Also updated + all file notices to refer to version 2. + + * gdbm.texinfo: Updated the documentation. + + * README: Updated to current version. + + * Makefile: updated clean and install. + +Wed Jul 14 13:37:44 1993 Phil Nelson (phil at cs.wwu.edu) + + * Makfile.in: Added samp1.cc to the list of distributed files. + +Sat Jun 5 21:35:59 1993 Phil Nelson (phil at cs.wwu.edu) + + * gdbm.proto, Makefile.in: Added #ifndef _GDBM_H_ protection + for the final gdbm.h file. Also added prototypes and C++ + support. + + * gdbmseq.c: Added gdbm_errno initialization to gdbm_nextkey. + + * gdbmerrno.h and others: Moved the extern definition of + gdbm_erron to gdbmerrno.h from the other files. + +Mon May 17 12:32:02 1993 Phil Nelson (phil at cs.wwu.edu) + + * gdbm.proto: Added GDBM_FAST to the read_write flags. + +Sun May 16 12:50:01 1993 Phil Nelson (phil at cs.wwu.edu) + + * configure.in, Makefile.in: Added autoconf configuration + to gdbm. + +Tue Mar 30 00:08:48 1993 Phil Nelson (phil at cs.wwu.edu) + + * global.c: Set gdbm_errno to GDBM_NO_ERROR to force + it into the data segment. + +Sun Mar 28 22:51:40 1993 Phil Nelson (phil at cs.wwu.edu) + + * gdbmfetch.c: Set return_val.dsize to 0 as a default return + value. (I was told that was more compatible with dbm/ndbm.) + + * gdbmopen.c: Changed a "sizeof(int)" to "sizeof(long)". + + * testgdbm.c: Changed "char opt" to "int opt" to make sure + opt can be -1. + + * hash.c: Added "unsigned" to declaration of value for + better overflow operation. + + * gdbmreorg.c: Added a free for data.dptr in the main loop. + Also changed the malloc for new_name to an alloca. + Removed all frees on new_name. + +Sat Mar 27 23:25:14 1993 Phil Nelson (phil at cs.wwu.edu) + + * gdbmconst.h, gdbmdefs.h, gdbmopen.c, gdbmreorg.c, + testgdbm.c, update.c, gdbm.h: Added code to allow for a + GDBM_FAST mode in which fsync is not called during + database update mode. Added a new flag "-f" to + testgdbm to make use of the new fast mode. + + * gdbmsync.c: Added this function to allow a programmer + to use the GDBM_FAST mode but still be able to sync + a database. + + * gdbmopen.c, gdbmdelete.c, gdbmfetch.c, gdbmseq.c, gdbmstore.c, + gdbmreorg.c: Added initialization of gdbm_errno to GDBM_NO_ERROR. + +Mon Mar 22 23:03:36 1993 Phil Nelson (phil at cs.wwu.edu) + + * gdbmclose.c: (gdbmclose) Added a fsync before close to make + sure the file is written to disk before continuing. + +Sun Mar 21 21:33:31 1993 Phil Nelson (phil at cs.wwu.edu) + + * proto.h: Added this as a new file. It adds ANSI prototypes + for ANSI compilers. + + * gdbmdefs.h: Added an include of proto.h. + + * Makefile: Added proper references to proto.h + + * gdbmopen.c: Changed (int *) casts to (long *) and added + an initialization to dbf->header. + + * gdbmreorg.c: Added an "end update" on the new database and + correctly set up the bucket cache. + + * update.c: (_gdbm_end_update) Added type void to header. + +Wed Mar 17 19:14:27 1993 Phil Nelson (phil at cs.wwu.edu) + + * Changed copyright on all files to include 1993. Also deleted + all references to my phone number. + +Thu Feb 28 17:05:09 1991 Phil Nelson (phil at strawberry.cs.wwu.edu) + + * Added 1991 to copyright lines on all files. + + * gdbmfetch.c: Fixed a bug introduced by previous changes. + + * version.c: Updated version to 1.5. + +Fri Feb 8 12:27:13 1991 Phil Nelson (phil at strawberry.cs.wwu.edu) + + * Change author's e-mail address in all comments. + + * gdbmopen.c, systems.h: Changed opening sequence so that a + database will not be truncated in NEWDB mode until the + write has locked the file. + + * testgdbm.c: Fixed a bug that caused a segmentation fault on + one computer. Also added the flags "-r" for opening the + database as a READER and "-n" for opening the database as + a NEWDB writer. The default mode remains the WRCREAT mode. + + * Various source files, changed the data types of various + variables from int to long. This should not make any difference + to systems where sizeof(int) = sizeof(long). It should make + it easier to move to other systems. + + * gdbmstore.c: Added a check for NULL key or content dptr. Due to + NULLs being used as error indications, data cannot be NULL also. + + * gdbmfetch.c, gdbmseq.c, fetch.c: Added checks for zero sized + key and content so malloc will not try to allocate zero bytes. + + * gdbmconst.h: Added this file so that all constants are in one + central place. A few constants can be changed without changing + the header sizes. + +Tue Aug 14 13:08:43 1990 Phil Nelson (phil at unicorn.wwu.edu) + + * Version 1.4 released. (version.c: Updated to correct version.) + + * Makefile: Added $(LIBS) to link for conv2gdbm. + + * README: Updated to version 1.4 and added a 1.0-1.4 change + statement. + +Wed Aug 8 16:57:29 1990 Phil Nelson (phil at unicorn.wwu.edu) + + * gdbmopen.c: Restructured some code to initialize dbf + more completely. + + * dbm.h: Added a null define to satisfy some versions that + require a dbmclose() call. + + * findkey.c: (_gdbm_findkey) Added a check for the NULL + pointer in ...ca_data.dptr. + + * gdbmdelete.c: Added code to more completely remove the + cache entry for a deleted item. + + * gdbmreorg.c: Added code to finish the transfer of information + from the new_dbf to the orginal dbf. + +Fri May 30 08:29:16 1990 Phil Nelson (phil at unicorn.wwu.edu) + + * gdbmstore.c: Changed a strncpy to bcopy. + +Tue May 15 09:55:21 1990 Phil Nelson (phil at unicorn.wwu.edu) + + * Version 1.3 released. + + * systems.h: Changed the defines for alloca to use the + name builtin_alloca to depend on BUILTIN_ALLOCA instead + of __GNUC__. Added a definition of BUILTIN_ALLOCA for + GNUC and for sun sparc. + +Fri May 11 12:15:56 1990 Phil Nelson (phil at unicorn.wwu.edu) + + * systems.h: Removed the include for and now + systems.h requires included before it. + + * Makefile: Corrected the makefile to include a file that + was missing before. Also, switched order of conv2gdbm + and alldbm in the all option. + + * findkey.c (_gdbm_read_entry): Reordered some statements + to make the code more readable. + + * update.c (_gdbm_fatal): Changed fatal message from "dbm fatal:" + to "gdbm fatal:". + +Mon Apr 30 10:18:24 1990 Phil Nelson (phil at unicorn.wwu.edu) + + * Version 1.2 released. + +Fri Apr 27 09:49:59 1990 Phil Nelson (phil at unicorn.wwu.edu) + + * Makefile: Added the dist option. Similar to the + addition from hack@ai.mit.edu, but correct. + + * falloc.c (push_avail_block): Change the avail count + to reflect the correct number of entries. + + * dbminit.c (dbminit): Changed the stat call to stat the + ".dir" file as is done in dbmopen.c (dbm_open). + +Tue Apr 10 12:18:40 1990 Phil Nelson (phil at unicorn.wwu.edu) + + * Version 1.1. released. + + * gdbmopen.c (gdbm_open): Clear out bucket cache. + + + diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..7d1c323 --- /dev/null +++ b/INSTALL @@ -0,0 +1,365 @@ +Installation Instructions +************************* + +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006, 2007, 2008, 2009 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..8768298 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,33 @@ +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +ACLOCAL_AMFLAGS = -I m4 +EXTRA_DIST = build-aux/config.rpath NOTE-WARNING +if COMPAT_OPT + MAYBE_COMPAT = compat +endif +if ENABLE_EXPORT + MAYBE_EXPORT = export +endif +SUBDIRS = po src doc $(MAYBE_COMPAT) $(MAYBE_EXPORT) tests + +DISTCHECK_CONFIGURE_FLAGS = --enable-libgdbm-compat + +dist-hook: + rm -f $(distdir)/src/version.c; \ + d=`date '+%d/%m/%Y'`; \ + sed 's|/\*@DIST_DATE@\*/|"'"$$d"'"|' $(srcdir)/src/version.c > \ + $(distdir)/src/version.c diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..9f80d90 --- /dev/null +++ b/Makefile.in @@ -0,0 +1,788 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/autoconf.h.in \ + $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \ + INSTALL NEWS THANKS build-aux/config.guess \ + build-aux/config.rpath build-aux/config.sub build-aux/depcomp \ + build-aux/install-sh build-aux/ltmain.sh build-aux/mdate-sh \ + build-aux/missing build-aux/texinfo.tex +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = autoconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir dist dist-all distcheck +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = po src doc compat export tests +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d "$(distdir)" \ + || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr "$(distdir)"; }; } +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOM4TE = @AUTOM4TE@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GDBM183_INCLUDEDIR = @GDBM183_INCLUDEDIR@ +GDBM183_LIBDIR = @GDBM183_LIBDIR@ +GDBM183_LIBRARY = @GDBM183_LIBRARY@ +GDBM_VERSION_MAJOR = @GDBM_VERSION_MAJOR@ +GDBM_VERSION_MINOR = @GDBM_VERSION_MINOR@ +GDBM_VERSION_PATCH = @GDBM_VERSION_PATCH@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +ACLOCAL_AMFLAGS = -I m4 +EXTRA_DIST = build-aux/config.rpath NOTE-WARNING +@COMPAT_OPT_TRUE@MAYBE_COMPAT = compat +@ENABLE_EXPORT_TRUE@MAYBE_EXPORT = export +SUBDIRS = po src doc $(MAYBE_COMPAT) $(MAYBE_EXPORT) tests +DISTCHECK_CONFIGURE_FLAGS = --enable-libgdbm-compat +all: autoconf.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnits'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnits \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnits Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +autoconf.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/autoconf.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status autoconf.h +$(srcdir)/autoconf.h.in: $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f autoconf.h stamp-h1 + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) autoconf.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) autoconf.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) autoconf.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) autoconf.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @case `sed 15q $(srcdir)/NEWS` in \ + *"$(VERSION)"*) : ;; \ + *) \ + echo "NEWS not updated; not releasing" 1>&2; \ + exit 1;; \ + esac + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @$(am__cd) '$(distuninstallcheck_dir)' \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile autoconf.h +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ + ctags-recursive install-am install-strip tags-recursive + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ + dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \ + dist-zip distcheck distclean distclean-generic distclean-hdr \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-recursive uninstall uninstall-am + + +dist-hook: + rm -f $(distdir)/src/version.c; \ + d=`date '+%d/%m/%Y'`; \ + sed 's|/\*@DIST_DATE@\*/|"'"$$d"'"|' $(srcdir)/src/version.c > \ + $(distdir)/src/version.c + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/NEWS b/NEWS new file mode 100644 index 0000000..31c82f3 --- /dev/null +++ b/NEWS @@ -0,0 +1,215 @@ +GNU dbm NEWS -- history of user-visible changes. 2011-11-13 +Copyright (C) 1990-2011 Free Software Foundation, Inc. +See the end of file for copying conditions. + +Please send gdbm bug reports to . + +Version 1.10, 2011-11-13 + +* Internationalization + +This version of GDBM is fully internationalized. The following +localizations are available: Finnish, German, Japanese, Polish and Ukrainian. + +* Support for close-on-exec flag in gdbm_open (see GDBM_CLOEXEC in the docs). + +* Improve testgdbm command system + +The testgdbm tool now supports multicharacter commands. + +* Bugfixes + +Bug numbers below refer to the tracker at + +** Bug #150. +Tolerate I/O operations returning less bytes than expected. Retry I/O +if possible. + +** Bug #151 +Gdbm_open now initializes with zeros the memory allocated for file +header. Previous versions left uninitialized portions intact, so +they contained whatever happened to be in that memory region at the +moment of allocation. This created undesired security implications. + +** Fix handling of NDBM databases in read-only mode. + + +Version 1.9.1 + +* Bugfix + +Improperly used preprocessor directive caused compilation failure +when using gcc 4.4.4 or newer. + + +Version 1.9, 2011-08-12 + +* Use of mmap + +To speed up I/O operations, mmap(2) is used when available. +It can be disabled at compile time using --disable-memory-mapped-io, +and at run time by giving GDBM_NOMMAP flag to gdbm_open. + +* Changes in compatibility mode + +The changes below fix several long-standing bugs in +ndbm compatibility code, which made it impossible to +use GDBM with Sendmail and Postfix. Now that they are +fixed, GDBM can be used with these MTAs. + +** Locking is disabled. + +Neither ndbm nor dbm functions lock their files. + +This bug was reported, in particular, in +https://bugzilla.redhat.com/show_bug.cgi?id=663932 + +** Do not link pag to dir. + +Instead of linking pag to dir as previous versions did, GDBM now +creates a separate dir file. Consequently, dbm_pagfno and +dbm_dirfno return different file descriptors. + +When opening an existing database as a writer, GDBM determines +if dir is linked to pag, and if so breaks the link and creates +a new dir file. When such a database is opened in a read-only +mode, GDBM does not attempt to alter the link. + +* gdbm_setopt + +New options are implemented for use with gdbm_setopt function. +In particular, a set of options is provided for retrieving various +database parameters, such as the file name, memory mapping status, +etc. + +* The testgdbm program is installed + +Testgdbm is an interactive tool for manipulating GDBM database files. +It allows you to view or update existing databases, export +them to the portable flat file format and to create new database files. + +* A testsuite is provided. + +* Improved documentation. + +Version 1.8.3 + +* Various configure related changes and additional updates. + +Version 1.8.2 + +* Allow `NEWDB'-opened databases to actually, well, store records. + +Version 1.8.1 + +* Lots of bug fixes, including a data corruption bug. +* Updated to current autoconf and libtool. +* Moved the dbm/ndbm compatibility routines to libgdbm_compat. + +Version 1.8 + +* Added GDBM_CENTFREE functionality and option. +* Added GDBM_COALESCEBLKS functionality and option. +* Added GDBM_NOLOCK flag. +* Made ``fast'' mode the default, making GDBM_FAST obsolete, and adding + the GDBM_SYNC flag and GDBM_SYNCMODE option. +* Switched to building with libtool. + +Version 1.7.3 + +* Fixed a couple of last minute problems. + +Namely, no autoconf.h in version.c, and no GDBM_FASTMODE in gdbm.h! + +* Fixed some documentation bugs. + +Version 1.7.2 + +* Enhanced portability and compile/installation changes. +* Additional, "fast mode" related gdbm_setopt() option. +* Growth problems bug fix. + +Version 1.7.1 + +* Enhanced portabilty and compile/installation bug fixes. +* Switched over to using an auto config header. +* Slight documentation upgrade. + +Version 1.7 + +* A new dynamic, delayed initialization, bucket cache. +* New gdbm_setopt(), gdbm_exists(), and gdbm_strerror() routines. +* Slightly improved dbm/ndbm compatibility. +* Greatly improved portability to 64 or 16 bit machines. +* Various bug fixes. + +Version 1.6 + +* New documentation in both man and texinfo formats. +* Bug fixes. +* A New "writers" mode that does not fsync the database. +* Uses Autoconf now. + +Version 1.5 + +* Minor bug fixes. See the ChangeLog. +* Added gdbmconst.h to allow users to change the size of the +* bucket cache in the systems.h file. + +Version 1.4 + +* Mainly bug fixes +* A define for "dbmclose()" was added to dbm.h for those few + implementaions that need that call. +* For details, see the ChangeLog. + +Version 1.0 + +* Makefiles were combined into one and a few new things added to it. +* Several minor bugs were fixed including a cache bug. +* Two new calls (dbm_pagfno, dbm_dirfno) were added to the NDBM interface. +* A conversion program from dbm files to gdbm files was added. +* Reorganize was changed to allow complex file names. (dir/file form) +* testgdbm, testndbm, and testdbm were modified to return key and data + pairs where needed and to take an optional file name as an argument. + testgdbm had some command characters changed. +* The DBM and NDBM interfaces were separated. +* An include file for dbm users was added. (dbm.h) +* The include file for ndbm users was renamed ndbm.h. (It was gndbm.h.) + +Version 0.9 + +* The hash function changed. +* The file format changed. +* There was a complete rewrite of falloc.c. +* There were added compatiblity routines for ndbm. +* The file names for dbm compatibility routines were made to look like dbm. +* Test programs changed. +* Support for System V. +* Various other small changes. +* The need for recovery and associated code was removed. + + +---------------------------------------------------------------------- +Copyright information: + +Copyright (C) 1990-2011 Free Software Foundation, Inc. + + Permission is granted to anyone to make or distribute verbatim copies + of this document as received, in any medium, provided that the + copyright notice and this permission notice are preserved, + thus giving the recipient permission to redistribute in turn. + + Permission is granted to distribute modified versions + of this document, or of portions of it, + under the above conditions, provided also that they + carry prominent notices stating who last changed them. + +Local variables: +mode: outline +paragraph-separate: "[ ]*$" +eval: (add-hook 'write-file-hooks 'time-stamp) +time-stamp-start: "changes. " +time-stamp-format: "%:y-%02m-%02d" +time-stamp-end: "\n" +end: diff --git a/NOTE-WARNING b/NOTE-WARNING new file mode 100644 index 0000000..6b1c197 --- /dev/null +++ b/NOTE-WARNING @@ -0,0 +1,34 @@ +****************************************************************************** + W A R N I N G +****************************************************************************** + +Gdbm files have never been `portable' between different operating systems, +system architectures, or potentially even different compilers. Differences +in byte order, the size of file offsets, and even structure packing make +gdbm files non-portable. + +Gdbm version 1.9 includes `large file' support, enabling it on operating +systems where it is not the default. `Large file' support is essentially +when a system uses 64bit file offsets. Gdbm has, of course, supported `large +files' on systems where it was the default for a very long time. + +On some systems, such as Solaris, this functionality is not enabled by +default. Gdbm will now enable it. THIS MEANS THAT GDBM 1.9 MAY NOT BE +ABLE TO ACCESS DATABASES CREATED BY PREVIOUS VERIONS ON THE SAME SYSTEM. + +Running the `configure' script with the `--disable-largefile' flag should +produce a backwards-compatible build on such a system. However, for maximum +compatibility, and increased functionality, you may want to have your +application produce a portable copy of your database with the 1.8.3 version +of the library, and then load it back into version 1.9. + +Gdbm 1.9 contains a utility designed to help you produce such a portable +copy: gdbmexport. To build it, configure the package with the +--enable-gdbm-export option. For the information on how to use this +utility, refer to the documentation, chapter 17 "Export a database into +a portable format." (run `info gdbm gdbmexport' to access it, once +gdbm 1.9 has been installed, or `info -f doc/gdbm.info gdbmexport' to +access the shipped info file). + + + diff --git a/README b/README new file mode 100644 index 0000000..0844c87 --- /dev/null +++ b/README @@ -0,0 +1,99 @@ +GNU dbm README +Copyright (C) 2011 Free Software Foundation, Inc. +See the end of file for copying conditions. + +* Introduction + +This file contains brief information about configuring, testing +and using GNU dbm. It is *not* intended as a replacement +for the documentation, instead it is provided as a brief reference +only. The complete documentation is available in doc/ subdirectory. +To read the manpage without installing the package use `man +doc/gdbm.3'. To read texinfo documentation without installing the +package, run `info -f doc/gdbm.info'. After the package is installed +the documentation can be accessed by running `man gdbm' and +`info gdbm'. + +* Overview + +GNU dbm is a set of database routines that use extendible hashing and +works similar to the standard UNIX dbm routines. The library provides +also an optional compatibility layer for UNIX-like dbm and ndbm calls. + +* Configuration + + a) configure [PARAMETERS] + b) make + +For a list of generic PARAMETERS, see the file INCLUDE. The gdbm-specific +parameters are: + +** --enable-memory-mapped-io + +Enable the use of mmap(2) for I/O optimizations. This is the default, +if mmap is available. To disable mmap, use --disable-memory-mapped-io. + +** --enable-libgdbm-compat + +Build and install libgdbm_compat, a compatibility layer which provides +UNIX-like dbm and ndbm interfaces. + +** --enable-gdbm-export + +Build and install gdbmexport with the specified gdbm 1.8 library. + +** --with-gdbm183-library=LIB + +Build gdbmexport with specified (static) library. LIB must be +a loader argument valid for the use with cc(1), e.g.: -lgdbm-1.8. + +** --gdbm183-libdir=DIR + +Build gdbmexport with the gdbm library from the specified directory. + +** --gdbm183-includedir=DIR + +Build gdbmexport with gdbm.h from the specified directory. + +* Installation + + make install + +* Bug reporting + +Please report bugs to + +* Documentation, updates etc. + +For the latest updates, visit , + +In particular, a copy of GDBM documentation in various formats is +available online at . + +Latest versions of GDBM can be downloaded from anonymous +ftp://ftp.gnu.org/gnu/gdbm. + +To track the development, visit +. + + +* Copyright information: + +Copyright (C) 2011 Free Software Foundation, Inc. + + Permission is granted to anyone to make or distribute verbatim copies + of this document as received, in any medium, provided that the + copyright notice and this permission notice are preserved, + thus giving the recipient permission to redistribute in turn. + + Permission is granted to distribute modified versions + of this document, or of portions of it, + under the above conditions, provided also that they + carry prominent notices stating who last changed them. + + +Local Variables: +mode: outline +paragraph-separate: "[ ]*$" +version-control: never +End: diff --git a/THANKS b/THANKS new file mode 100644 index 0000000..56cc573 --- /dev/null +++ b/THANKS @@ -0,0 +1,8 @@ +GDBM THANKS file. + +Many people further contributed to GDBM by reporting problems, +suggesting various improvements or submitting actual code. Here is a list +of these people. Help us keep it complete and exempt of errors. + +Matthew Burgess +Tanaka Akira diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..9080a65 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,992 @@ +# generated automatically by aclocal 1.11.1 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, +[m4_warning([this file was generated for autoconf 2.63. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.11.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 10 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 5 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 16 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.62])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# (`yes' being less verbose, `no' or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], +[ --enable-silent-rules less verbose build output (undo: `make V=1') + --disable-silent-rules verbose build output (undo: `make V=0')]) +case $enable_silent_rules in +yes) AM_DEFAULT_VERBOSITY=0;; +no) AM_DEFAULT_VERBOSITY=1;; +*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([m4/gettext.m4]) +m4_include([m4/iconv.m4]) +m4_include([m4/intlmacosx.m4]) +m4_include([m4/lib-ld.m4]) +m4_include([m4/lib-link.m4]) +m4_include([m4/lib-prefix.m4]) +m4_include([m4/libtool.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) +m4_include([m4/nls.m4]) +m4_include([m4/po.m4]) +m4_include([m4/progtest.m4]) diff --git a/autoconf.h.in b/autoconf.h.in new file mode 100644 index 0000000..aff7024 --- /dev/null +++ b/autoconf.h.in @@ -0,0 +1,144 @@ +/* autoconf.h.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if translation of program messages to the user's native + language is requested. */ +#undef ENABLE_NLS + +/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the + CoreFoundation framework. */ +#undef HAVE_CFLOCALECOPYCURRENT + +/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in + the CoreFoundation framework. */ +#undef HAVE_CFPREFERENCESCOPYAPPVALUE + +/* Define if the GNU dcgettext() function is already present or preinstalled. + */ +#undef HAVE_DCGETTEXT + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_FCNTL_H + +/* Define to 1 if you have the `flock' function. */ +#undef HAVE_FLOCK + +/* Define to 1 if you have the `fsync' function. */ +#undef HAVE_FSYNC + +/* Define to 1 if you have the `ftruncate' function. */ +#undef HAVE_FTRUNCATE + +/* Define to 1 if you have the `getpagesize' function. */ +#undef HAVE_GETPAGESIZE + +/* Define if the GNU gettext() function is already present or preinstalled. */ +#undef HAVE_GETTEXT + +/* Define if you have the iconv() function and it works. */ +#undef HAVE_ICONV + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the `dbm' library (-ldbm). */ +#undef HAVE_LIBDBM + +/* Define to 1 if you have the `ndbm' library (-lndbm). */ +#undef HAVE_LIBNDBM + +/* Define to 1 if you have the header file. */ +#undef HAVE_LOCALE_H + +/* Define to 1 if you have the `lockf' function. */ +#undef HAVE_LOCKF + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have a working `mmap' system call. */ +#undef HAVE_MMAP + +/* Define to 1 if you have the `msync' function. */ +#undef HAVE_MSYNC + +/* Define to 1 if you have the `rename' function. */ +#undef HAVE_RENAME + +/* Define to 1 if you have the `setlocale' function. */ +#undef HAVE_SETLOCALE + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if `st_blksize' is member of `struct stat'. */ +#undef HAVE_STRUCT_STAT_ST_BLKSIZE + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_FILE_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TERMIOS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* The size of `off_t', as computed by sizeof. */ +#undef SIZEOF_OFF_T + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Version number of package */ +#undef VERSION + +/* Number of bits in a file offset, on hosts where this is settable. */ +#undef _FILE_OFFSET_BITS + +/* Define for large files, on AIX-style hosts. */ +#undef _LARGE_FILES + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to `long int' if does not define. */ +#undef off_t diff --git a/build-aux/config.guess b/build-aux/config.guess new file mode 100755 index 0000000..dc84c68 --- /dev/null +++ b/build-aux/config.guess @@ -0,0 +1,1501 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 +# Free Software Foundation, Inc. + +timestamp='2009-11-20' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[456]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/build-aux/config.rpath b/build-aux/config.rpath new file mode 100755 index 0000000..17298f2 --- /dev/null +++ b/build-aux/config.rpath @@ -0,0 +1,672 @@ +#! /bin/sh +# Output a system dependent set of variables, describing how to set the +# run time search path of shared libraries in an executable. +# +# Copyright 1996-2010 Free Software Foundation, Inc. +# Taken from GNU libtool, 2001 +# Originally by Gordon Matzigkeit , 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# The first argument passed to this file is the canonical host specification, +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld +# should be set by the caller. +# +# The set of defined variables is at the end of this script. + +# Known limitations: +# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer +# than 256 bytes, otherwise the compiler driver will dump core. The only +# known workaround is to choose shorter directory names for the build +# directory and/or the installation directory. + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +shrext=.so + +host="$1" +host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +# Code taken from libtool.m4's _LT_CC_BASENAME. + +for cc_temp in $CC""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` + +# Code taken from libtool.m4's _LT_COMPILER_PIC. + +wl= +if test "$GCC" = yes; then + wl='-Wl,' +else + case "$host_os" in + aix*) + wl='-Wl,' + ;; + darwin*) + case $cc_basename in + xlc*) + wl='-Wl,' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) + ;; + hpux9* | hpux10* | hpux11*) + wl='-Wl,' + ;; + irix5* | irix6* | nonstopux*) + wl='-Wl,' + ;; + newsos6) + ;; + linux* | k*bsd*-gnu) + case $cc_basename in + ecc*) + wl='-Wl,' + ;; + icc* | ifort*) + wl='-Wl,' + ;; + lf95*) + wl='-Wl,' + ;; + pgcc | pgf77 | pgf90) + wl='-Wl,' + ;; + ccc*) + wl='-Wl,' + ;; + como) + wl='-lopt=' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + wl='-Wl,' + ;; + esac + ;; + esac + ;; + osf3* | osf4* | osf5*) + wl='-Wl,' + ;; + rdos*) + ;; + solaris*) + wl='-Wl,' + ;; + sunos4*) + wl='-Qoption ld ' + ;; + sysv4 | sysv4.2uw2* | sysv4.3*) + wl='-Wl,' + ;; + sysv4*MP*) + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + wl='-Wl,' + ;; + unicos*) + wl='-Wl,' + ;; + uts4*) + ;; + esac +fi + +# Code taken from libtool.m4's _LT_LINKER_SHLIBS. + +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no + +case "$host_os" in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + # Unlike libtool, we use -rpath here, not --rpath, since the documented + # option of GNU ld is called -rpath, not --rpath. + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + case "$host_os" in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + fi + ;; + amigaos*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we cannot use + # them. + ld_shlibs=no + ;; + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + interix[3-9]*) + hardcode_direct=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + gnu* | linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + netbsd*) + ;; + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) + hardcode_direct=yes + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + esac + if test "$ld_shlibs" = no; then + hardcode_libdir_flag_spec= + fi +else + case "$host_os" in + aix3*) + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + else + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + fi + hardcode_direct=yes + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + fi + # Begin _LT_AC_SYS_LIBPATH_AIX. + echo 'int main () { return 0; }' > conftest.c + ${CC} ${LDFLAGS} conftest.c -o conftest + aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + fi + if test -z "$aix_libpath"; then + aix_libpath="/usr/lib:/lib" + fi + rm -f conftest.c conftest + # End _LT_AC_SYS_LIBPATH_AIX. + if test "$aix_use_runtimelinking" = yes; then + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + fi + fi + ;; + amigaos*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + bsdi[45]*) + ;; + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + libext=lib + ;; + darwin* | rhapsody*) + hardcode_direct=no + if test "$GCC" = yes ; then + : + else + case $cc_basename in + xlc*) + ;; + *) + ld_shlibs=no + ;; + esac + fi + ;; + dgux*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + freebsd1*) + ld_shlibs=no + ;; + freebsd2.2*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + freebsd2*) + hardcode_direct=yes + hardcode_minus_L=yes + ;; + freebsd* | dragonfly*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + hpux9*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + hpux10*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + hpux11*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + ;; + *) + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + netbsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + newsos6) + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + osf3*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) + if test "$GCC" = yes; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + # Both cc and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + solaris*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + sunos4*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + sysv4) + case $host_vendor in + sni) + hardcode_direct=yes # is this really true??? + ;; + siemens) + hardcode_direct=no + ;; + motorola) + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + ;; + sysv4.3*) + ;; + sysv4*MP*) + if test -d /usr/nec; then + ld_shlibs=yes + fi + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + ;; + sysv5* | sco3.2v5* | sco5v6*) + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + ;; + uts4*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + *) + ld_shlibs=no + ;; + esac +fi + +# Check dynamic linker characteristics +# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. +# Unlike libtool.m4, here we don't care about _all_ names of the library, but +# only about the one the linker finds when passed -lNAME. This is the last +# element of library_names_spec in libtool.m4, or possibly two of them if the +# linker has special search rules. +library_names_spec= # the last element of library_names_spec in libtool.m4 +libname_spec='lib$name' +case "$host_os" in + aix3*) + library_names_spec='$libname.a' + ;; + aix[4-9]*) + library_names_spec='$libname$shrext' + ;; + amigaos*) + library_names_spec='$libname.a' + ;; + beos*) + library_names_spec='$libname$shrext' + ;; + bsdi[45]*) + library_names_spec='$libname$shrext' + ;; + cygwin* | mingw* | pw32* | cegcc*) + shrext=.dll + library_names_spec='$libname.dll.a $libname.lib' + ;; + darwin* | rhapsody*) + shrext=.dylib + library_names_spec='$libname$shrext' + ;; + dgux*) + library_names_spec='$libname$shrext' + ;; + freebsd1*) + ;; + freebsd* | dragonfly*) + case "$host_os" in + freebsd[123]*) + library_names_spec='$libname$shrext$versuffix' ;; + *) + library_names_spec='$libname$shrext' ;; + esac + ;; + gnu*) + library_names_spec='$libname$shrext' + ;; + hpux9* | hpux10* | hpux11*) + case $host_cpu in + ia64*) + shrext=.so + ;; + hppa*64*) + shrext=.sl + ;; + *) + shrext=.sl + ;; + esac + library_names_spec='$libname$shrext' + ;; + interix[3-9]*) + library_names_spec='$libname$shrext' + ;; + irix5* | irix6* | nonstopux*) + library_names_spec='$libname$shrext' + case "$host_os" in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; + *) libsuff= shlibsuff= ;; + esac + ;; + esac + ;; + linux*oldld* | linux*aout* | linux*coff*) + ;; + linux* | k*bsd*-gnu) + library_names_spec='$libname$shrext' + ;; + knetbsd*-gnu) + library_names_spec='$libname$shrext' + ;; + netbsd*) + library_names_spec='$libname$shrext' + ;; + newsos6) + library_names_spec='$libname$shrext' + ;; + nto-qnx*) + library_names_spec='$libname$shrext' + ;; + openbsd*) + library_names_spec='$libname$shrext$versuffix' + ;; + os2*) + libname_spec='$name' + shrext=.dll + library_names_spec='$libname.a' + ;; + osf3* | osf4* | osf5*) + library_names_spec='$libname$shrext' + ;; + rdos*) + ;; + solaris*) + library_names_spec='$libname$shrext' + ;; + sunos4*) + library_names_spec='$libname$shrext$versuffix' + ;; + sysv4 | sysv4.3*) + library_names_spec='$libname$shrext' + ;; + sysv4*MP*) + library_names_spec='$libname$shrext' + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + library_names_spec='$libname$shrext' + ;; + uts4*) + library_names_spec='$libname$shrext' + ;; +esac + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` +shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` + +LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. Submit a context +# diff and a properly formatted GNU ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nios | nios2 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12 | picochip) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze) + basic_machine=microblaze-xilinx + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/build-aux/depcomp b/build-aux/depcomp new file mode 100755 index 0000000..df8eea7 --- /dev/null +++ b/build-aux/depcomp @@ -0,0 +1,630 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free +# Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u="sed s,\\\\\\\\,/,g" + depmode=msvisualcpp +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> "$depfile" + echo >> "$depfile" + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/install-sh b/build-aux/install-sh new file mode 100755 index 0000000..6781b98 --- /dev/null +++ b/build-aux/install-sh @@ -0,0 +1,520 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2009-04-28.21; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dst_arg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh new file mode 100755 index 0000000..0d369c2 --- /dev/null +++ b/build-aux/ltmain.sh @@ -0,0 +1,8625 @@ +# Generated from ltmain.m4sh. + +# libtool (GNU libtool 1.3121 2009-09-18) 2.2.7a +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool 1.3121 2009-09-18) 2.2.7a +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . + +PROGRAM=libtool +PACKAGE=libtool +VERSION=2.2.7a +TIMESTAMP=" 1.3121 2009-09-18" +package_revision=1.3121 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done + +$lt_unset CDPATH + + + + + + + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + + + +: ${CP="cp -f"} +: ${ECHO=$as_echo} +: ${EGREP="/usr/bin/grep -E"} +: ${FGREP="/usr/bin/grep -F"} +: ${GREP="/usr/bin/grep"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SED="/usr/bin/sed"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} + +# Generated shell functions inserted here. + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar="s,^/\([^/]*\).*$,\1," +pathcdr="s,^/[^/]*,," +removedotparts="s@/\(\./\)\{1,\}@/@g;s,/\.$,/," +collapseslashes="s@/\{1,\}@/@g" +finalslash="s,/*$,/," + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} + +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=: + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname${mode+: }$mode: $*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "$my_tmpdir" +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + + + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# // + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $SED -n '/^# Usage:/,/^# *-h/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $SED -n '/^# Usage:/,/# Report bugs to/ { + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + p + }' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + func_error "missing argument for $1" + exit_cmd=exit +} + +exit_cmd=: + + + + + + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +# $mode is unset +nonopt= +execute_dlfiles= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +opt_dry_run=false +opt_duplicate_deps=false +opt_silent=false +opt_debug=: + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. +{ + + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + + # Parse non-mode specific arguments: + while test "$#" -gt 0; do + opt="$1" + shift + + case $opt in + --config) func_config ;; + + --debug) preserve_args="$preserve_args $opt" + func_echo "enabling shell trace mode" + opt_debug='set -x' + $opt_debug + ;; + + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" + shift + ;; + + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" + shift + ;; + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" + opt_silent=: + opt_verbose=false + ;; + + --no-quiet|--no-silent) + preserve_args="$preserve_args $opt" + opt_silent=false + ;; + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false + opt_verbose=: + ;; + + --no-verbose) preserve_args="$preserve_args $opt" + opt_verbose=false + ;; + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here + shift + ;; + + # Separate optargs to long options: + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} + shift + ;; + + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --help-all) opt_help=': help-all' ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; + + *) nonopt="$opt" + break + ;; + esac + done + + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps + ;; + esac + + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +## ----------- ## +## Main. ## +## ----------- ## + +$opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$mode' for more information." +} + + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T <?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + removelist="$removelist $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + removelist="$removelist $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + command="$command -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test "$mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + exit $EXIT_SUCCESS +} + +test "$mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + install_prog="$install_prog$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + install_prog="$install_prog $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + install_shared_prog="$install_shared_prog $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + install_shared_prog="$install_shared_prog -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +" + case $host in + *cygwin* | *mingw* | *cegcc* ) + echo >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac + + echo >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +$lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) symtab_cflags="$symtab_cflags $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pe-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + win32_nmres=`eval $NM -f posix -A $1 | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi\ + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_to_host_path arg +# +# Convert paths to host format when used with build tools. +# Intended for use with "native" mingw (where libtool itself +# is running under the msys shell), or in the following cross- +# build environments: +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# where wine is equipped with the `winepath' executable. +# In the native mingw case, the (msys) shell automatically +# converts paths for any non-msys applications it launches, +# but that facility isn't available from inside the cwrapper. +# Similar accommodations are necessary for $host mingw and +# $build cygwin. Calling this function does no harm for other +# $host/$build combinations not listed above. +# +# ARG is the path (on $build) that should be converted to +# the proper representation for $host. The result is stored +# in $func_to_host_path_result. +func_to_host_path () +{ + func_to_host_path_result="$1" + if test -n "$1"; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + case $build in + *mingw* ) # actually, msys + # awkward: cmd appends spaces to result + func_to_host_path_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_path_result=`cygpath -w "$1" | + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # Unfortunately, winepath does not exit with a non-zero + # error code, so we are forced to check the contents of + # stdout. On the other hand, if the command is not + # found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both + # error code of zero AND non-empty stdout, which explains + # the odd construction: + func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then + func_to_host_path_result=`$ECHO "$func_to_host_path_tmp1" | + $SED -e "$lt_sed_naive_backslashify"` + else + # Allow warning below. + func_to_host_path_result= + fi + ;; + esac + if test -z "$func_to_host_path_result" ; then + func_error "Could not determine host path corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_path_result="$1" + fi + ;; + esac + fi +} +# end: func_to_host_path + +# func_to_host_pathlist arg +# +# Convert pathlists to host format when used with build tools. +# See func_to_host_path(), above. This function supports the +# following $build/$host combinations (but does no harm for +# combinations not listed here): +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# +# Path separators are also converted from $build format to +# $host format. If ARG begins or ends with a path separator +# character, it is preserved (but converted to $host format) +# on output. +# +# ARG is a pathlist (on $build) that should be converted to +# the proper representation on $host. The result is stored +# in $func_to_host_pathlist_result. +func_to_host_pathlist () +{ + func_to_host_pathlist_result="$1" + if test -n "$1"; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_pathlist_tmp1=$func_stripname_result + case $build in + *mingw* ) # Actually, msys. + # Awkward: cmd appends spaces to result. + func_to_host_pathlist_result=` + ( cmd //c echo "$func_to_host_pathlist_tmp1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_pathlist_result=`cygpath -w -p "$func_to_host_pathlist_tmp1" | + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # unfortunately, winepath doesn't convert pathlists + func_to_host_pathlist_result="" + func_to_host_pathlist_oldIFS=$IFS + IFS=: + for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do + IFS=$func_to_host_pathlist_oldIFS + if test -n "$func_to_host_pathlist_f" ; then + func_to_host_path "$func_to_host_pathlist_f" + if test -n "$func_to_host_path_result" ; then + if test -z "$func_to_host_pathlist_result" ; then + func_to_host_pathlist_result="$func_to_host_path_result" + else + func_append func_to_host_pathlist_result ";$func_to_host_path_result" + fi + fi + fi + done + IFS=$func_to_host_pathlist_oldIFS + ;; + esac + if test -z "$func_to_host_pathlist_result"; then + func_error "Could not determine the host path(s) corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This may break if $1 contains DOS-style drive + # specifications. The fix is not to complicate the expression + # below, but for the user to provide a working wine installation + # with winepath so that path translation in the cross-to-mingw + # case works properly. + lt_replace_pathsep_nix_to_dos="s|:|;|g" + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_replace_pathsep_nix_to_dos"` + fi + # Now, add the leading and trailing path separators back + case "$1" in + :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" + ;; + esac + case "$1" in + *: ) func_append func_to_host_pathlist_result ";" + ;; + esac + ;; + esac + fi +} +# end: func_to_host_pathlist + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#undef LTWRAPPER_DEBUGPRINTF +#if defined LT_DEBUGWRAPPER +# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +static void +ltwrapper_debugprintf (const char *fmt, ...) +{ + va_list args; + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); +} +#else +# define LTWRAPPER_DEBUGPRINTF(args) +#endif + +const char *program_name = NULL; + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_fatal (const char *message, ...); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <"))); + for (i = 0; i < newargc; i++) + { + LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); + } + +EOF + + case $host_os in + mingw*) + cat <<"EOF" + /* execv doesn't actually work on mingw as expected on unix */ + newargz = prepare_spawn (newargz); + rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); + if (rval == -1) + { + /* failed to start process */ + LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); + return 127; + } + return rval; +EOF + ;; + *) + cat <<"EOF" + execv (lt_argv_zero, newargz); + return rval; /* =127, but avoids unused variable warning */ +EOF + ;; + esac + + cat <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void *p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), + string) : NULL; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char) name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable (const char *path) +{ + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", + wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", + tmp_pathspec)); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + char *errstr = strerror (errno); + lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal ("Could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} + +void +lt_setenv (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", + (name ? name : ""), + (value ? value : ""))); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' + + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + weak_libs="$weak_libs $arg" + prev= + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname '-L' '' "$arg" + dir=$func_stripname_result + if test -z "$dir"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_duplicate_deps ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + case $lib in + *.la) func_source "$lib" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) deplibs="$deplibs $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + dir=$func_stripname_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) temp_rpath="$temp_rpath$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + notinst_deplibs="$notinst_deplibs $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_dirname "$deplib" "" "." + dir="$func_dirname_result" + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + libobjs="$libobjs $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + delfiles="$delfiles $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + func_len " $cmd" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + $ECHO "$obj" >> $output + done + echo ')' >> $output + delfiles="$delfiles $output" + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + $ECHO "$obj" >> $output + done + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + delfiles="$delfiles $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + oldobjs="$oldobjs $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlfiles="$newdlfiles $libdir/$name" + ;; + *) newdlfiles="$newdlfiles $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlprefiles="$newdlprefiles $libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$mode" = link || test "$mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + + case "$mode" in + clean) + case " $library_names " in + # " " in the beginning catches empty $dlname + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$mode" = uninstall || test "$mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + diff --git a/build-aux/mdate-sh b/build-aux/mdate-sh new file mode 100755 index 0000000..e631b22 --- /dev/null +++ b/build-aux/mdate-sh @@ -0,0 +1,205 @@ +#!/bin/sh +# Get modification time of a file or directory and pretty-print it. + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1995, 1996, 1997, 2003, 2004, 2005, 2007, 2009 Free +# Software Foundation, Inc. +# written by Ulrich Drepper , June 1995 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +case $1 in + '') + echo "$0: No file. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: mdate-sh [--help] [--version] FILE + +Pretty-print the modification time of FILE. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "mdate-sh $scriptversion" + exit $? + ;; +esac + +# Prevent date giving response in another language. +LANG=C +export LANG +LC_ALL=C +export LC_ALL +LC_TIME=C +export LC_TIME + +# GNU ls changes its time format in response to the TIME_STYLE +# variable. Since we cannot assume `unset' works, revert this +# variable to its documented default. +if test "${TIME_STYLE+set}" = set; then + TIME_STYLE=posix-long-iso + export TIME_STYLE +fi + +save_arg1=$1 + +# Find out how to get the extended ls output of a file or directory. +if ls -L /dev/null 1>/dev/null 2>&1; then + ls_command='ls -L -l -d' +else + ls_command='ls -l -d' +fi +# Avoid user/group names that might have spaces, when possible. +if ls -n /dev/null 1>/dev/null 2>&1; then + ls_command="$ls_command -n" +fi + +# A `ls -l' line looks as follows on OS/2. +# drwxrwx--- 0 Aug 11 2001 foo +# This differs from Unix, which adds ownership information. +# drwxrwx--- 2 root root 4096 Aug 11 2001 foo +# +# To find the date, we split the line on spaces and iterate on words +# until we find a month. This cannot work with files whose owner is a +# user named `Jan', or `Feb', etc. However, it's unlikely that `/' +# will be owned by a user whose name is a month. So we first look at +# the extended ls output of the root directory to decide how many +# words should be skipped to get the date. + +# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below. +set x`$ls_command /` + +# Find which argument is the month. +month= +command= +until test $month +do + shift + # Add another shift to the command. + command="$command shift;" + case $1 in + Jan) month=January; nummonth=1;; + Feb) month=February; nummonth=2;; + Mar) month=March; nummonth=3;; + Apr) month=April; nummonth=4;; + May) month=May; nummonth=5;; + Jun) month=June; nummonth=6;; + Jul) month=July; nummonth=7;; + Aug) month=August; nummonth=8;; + Sep) month=September; nummonth=9;; + Oct) month=October; nummonth=10;; + Nov) month=November; nummonth=11;; + Dec) month=December; nummonth=12;; + esac +done + +# Get the extended ls output of the file or directory. +set dummy x`eval "$ls_command \"\$save_arg1\""` + +# Remove all preceding arguments +eval $command + +# Because of the dummy argument above, month is in $2. +# +# On a POSIX system, we should have +# +# $# = 5 +# $1 = file size +# $2 = month +# $3 = day +# $4 = year or time +# $5 = filename +# +# On Darwin 7.7.0 and 7.6.0, we have +# +# $# = 4 +# $1 = day +# $2 = month +# $3 = year or time +# $4 = filename + +# Get the month. +case $2 in + Jan) month=January; nummonth=1;; + Feb) month=February; nummonth=2;; + Mar) month=March; nummonth=3;; + Apr) month=April; nummonth=4;; + May) month=May; nummonth=5;; + Jun) month=June; nummonth=6;; + Jul) month=July; nummonth=7;; + Aug) month=August; nummonth=8;; + Sep) month=September; nummonth=9;; + Oct) month=October; nummonth=10;; + Nov) month=November; nummonth=11;; + Dec) month=December; nummonth=12;; +esac + +case $3 in + ???*) day=$1;; + *) day=$3; shift;; +esac + +# Here we have to deal with the problem that the ls output gives either +# the time of day or the year. +case $3 in + *:*) set `date`; eval year=\$$# + case $2 in + Jan) nummonthtod=1;; + Feb) nummonthtod=2;; + Mar) nummonthtod=3;; + Apr) nummonthtod=4;; + May) nummonthtod=5;; + Jun) nummonthtod=6;; + Jul) nummonthtod=7;; + Aug) nummonthtod=8;; + Sep) nummonthtod=9;; + Oct) nummonthtod=10;; + Nov) nummonthtod=11;; + Dec) nummonthtod=12;; + esac + # For the first six month of the year the time notation can also + # be used for files modified in the last year. + if (expr $nummonth \> $nummonthtod) > /dev/null; + then + year=`expr $year - 1` + fi;; + *) year=$3;; +esac + +# The result. +echo $day $month $year + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/missing b/build-aux/missing new file mode 100755 index 0000000..28055d2 --- /dev/null +++ b/build-aux/missing @@ -0,0 +1,376 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + tar*) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te*) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex*|flex*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + tar*) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case $firstarg in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case $firstarg in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/texinfo.tex b/build-aux/texinfo.tex new file mode 100644 index 0000000..9140826 --- /dev/null +++ b/build-aux/texinfo.tex @@ -0,0 +1,9291 @@ +% texinfo.tex -- TeX macros to handle Texinfo files. +% +% Load plain if necessary, i.e., if running under initex. +\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi +% +\def\texinfoversion{2009-08-14.15} +% +% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, +% 2007, 2008, 2009 Free Software Foundation, Inc. +% +% This texinfo.tex file is free software: you can redistribute it and/or +% modify it under the terms of the GNU General Public License as +% published by the Free Software Foundation, either version 3 of the +% License, or (at your option) any later version. +% +% This texinfo.tex file is distributed in the hope that it will be +% useful, but WITHOUT ANY WARRANTY; without even the implied warranty +% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +% General Public License for more details. +% +% You should have received a copy of the GNU General Public License +% along with this program. If not, see . +% +% As a special exception, when this file is read by TeX when processing +% a Texinfo source document, you may use the result without +% restriction. (This has been our intent since Texinfo was invented.) +% +% Please try the latest version of texinfo.tex before submitting bug +% reports; you can get the latest version from: +% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or +% ftp://tug.org/tex/texinfo.tex +% (and all CTAN mirrors, see http://www.ctan.org). +% The texinfo.tex in any given distribution could well be out +% of date, so if that's what you're using, please check. +% +% Send bug reports to bug-texinfo@gnu.org. Please include including a +% complete document in each bug report with which we can reproduce the +% problem. Patches are, of course, greatly appreciated. +% +% To process a Texinfo manual with TeX, it's most reliable to use the +% texi2dvi shell script that comes with the distribution. For a simple +% manual foo.texi, however, you can get away with this: +% tex foo.texi +% texindex foo.?? +% tex foo.texi +% tex foo.texi +% dvips foo.dvi -o # or whatever; this makes foo.ps. +% The extra TeX runs get the cross-reference information correct. +% Sometimes one run after texindex suffices, and sometimes you need more +% than two; texi2dvi does it as many times as necessary. +% +% It is possible to adapt texinfo.tex for other languages, to some +% extent. You can get the existing language-specific files from the +% full Texinfo distribution. +% +% The GNU Texinfo home page is http://www.gnu.org/software/texinfo. + + +\message{Loading texinfo [version \texinfoversion]:} + +% If in a .fmt file, print the version number +% and turn on active characters that we couldn't do earlier because +% they might have appeared in the input file name. +\everyjob{\message{[Texinfo version \texinfoversion]}% + \catcode`+=\active \catcode`\_=\active} + + +\chardef\other=12 + +% We never want plain's \outer definition of \+ in Texinfo. +% For @tex, we can use \tabalign. +\let\+ = \relax + +% Save some plain tex macros whose names we will redefine. +\let\ptexb=\b +\let\ptexbullet=\bullet +\let\ptexc=\c +\let\ptexcomma=\, +\let\ptexdot=\. +\let\ptexdots=\dots +\let\ptexend=\end +\let\ptexequiv=\equiv +\let\ptexexclam=\! +\let\ptexfootnote=\footnote +\let\ptexgtr=> +\let\ptexhat=^ +\let\ptexi=\i +\let\ptexindent=\indent +\let\ptexinsert=\insert +\let\ptexlbrace=\{ +\let\ptexless=< +\let\ptexnewwrite\newwrite +\let\ptexnoindent=\noindent +\let\ptexplus=+ +\let\ptexrbrace=\} +\let\ptexslash=\/ +\let\ptexstar=\* +\let\ptext=\t +\let\ptextop=\top +{\catcode`\'=\active +\global\let\ptexquoteright'}% Math-mode def from plain.tex. +\let\ptexraggedright=\raggedright + +% If this character appears in an error message or help string, it +% starts a new line in the output. +\newlinechar = `^^J + +% Use TeX 3.0's \inputlineno to get the line number, for better error +% messages, but if we're using an old version of TeX, don't do anything. +% +\ifx\inputlineno\thisisundefined + \let\linenumber = \empty % Pre-3.0. +\else + \def\linenumber{l.\the\inputlineno:\space} +\fi + +% Set up fixed words for English if not already set. +\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi +\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi +\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi +\ifx\putwordin\undefined \gdef\putwordin{in}\fi +\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi +\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi +\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi +\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi +\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi +\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi +\ifx\putwordof\undefined \gdef\putwordof{of}\fi +\ifx\putwordon\undefined \gdef\putwordon{on}\fi +\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi +\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi +\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi +\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi +\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi +\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi +\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi +% +\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi +\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi +\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi +\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi +\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi +\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi +\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi +\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi +\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi +\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi +\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi +\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi +% +\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi +\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi +\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi +\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi +\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi + +% Since the category of space is not known, we have to be careful. +\chardef\spacecat = 10 +\def\spaceisspace{\catcode`\ =\spacecat} + +% sometimes characters are active, so we need control sequences. +\chardef\colonChar = `\: +\chardef\commaChar = `\, +\chardef\dashChar = `\- +\chardef\dotChar = `\. +\chardef\exclamChar= `\! +\chardef\lquoteChar= `\` +\chardef\questChar = `\? +\chardef\rquoteChar= `\' +\chardef\semiChar = `\; +\chardef\underChar = `\_ + +% Ignore a token. +% +\def\gobble#1{} + +% The following is used inside several \edef's. +\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname} + +% Hyphenation fixes. +\hyphenation{ + Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script + ap-pen-dix bit-map bit-maps + data-base data-bases eshell fall-ing half-way long-est man-u-script + man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm + par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces + spell-ing spell-ings + stand-alone strong-est time-stamp time-stamps which-ever white-space + wide-spread wrap-around +} + +% Margin to add to right of even pages, to left of odd pages. +\newdimen\bindingoffset +\newdimen\normaloffset +\newdimen\pagewidth \newdimen\pageheight + +% For a final copy, take out the rectangles +% that mark overfull boxes (in case you have decided +% that the text looks ok even though it passes the margin). +% +\def\finalout{\overfullrule=0pt} + +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). +% +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% +} + +% Sometimes it is convenient to have everything in the transcript file +% and nothing on the terminal. We don't just call \tracingall here, +% since that produces some useless output on the terminal. We also make +% some effort to order the tracing commands to reduce output in the log +% file; cf. trace.sty in LaTeX. +% +\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% +\def\loggingall{% + \tracingstats2 + \tracingpages1 + \tracinglostchars2 % 2 gives us more in etex + \tracingparagraphs1 + \tracingoutput1 + \tracingmacros2 + \tracingrestores1 + \showboxbreadth\maxdimen \showboxdepth\maxdimen + \ifx\eTeXversion\undefined\else % etex gives us more logging + \tracingscantokens1 + \tracingifs1 + \tracinggroups1 + \tracingnesting2 + \tracingassigns1 + \fi + \tracingcommands3 % 3 gives us more in etex + \errorcontextlines16 +}% + +% add check for \lastpenalty to plain's definitions. If the last thing +% we did was a \nobreak, we don't want to insert more space. +% +\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount + \removelastskip\penalty-50\smallskip\fi\fi} +\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount + \removelastskip\penalty-100\medskip\fi\fi} +\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount + \removelastskip\penalty-200\bigskip\fi\fi} + +% For @cropmarks command. +% Do @cropmarks to get crop marks. +% +\newif\ifcropmarks +\let\cropmarks = \cropmarkstrue +% +% Dimensions to add cropmarks at corners. +% Added by P. A. MacKay, 12 Nov. 1986 +% +\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines +\newdimen\cornerlong \cornerlong=1pc +\newdimen\cornerthick \cornerthick=.3pt +\newdimen\topandbottommargin \topandbottommargin=.75in + +% Output a mark which sets \thischapter, \thissection and \thiscolor. +% We dump everything together because we only have one kind of mark. +% This works because we only use \botmark / \topmark, not \firstmark. +% +% A mark contains a subexpression of the \ifcase ... \fi construct. +% \get*marks macros below extract the needed part using \ifcase. +% +% Another complication is to let the user choose whether \thischapter +% (\thissection) refers to the chapter (section) in effect at the top +% of a page, or that at the bottom of a page. The solution is +% described on page 260 of The TeXbook. It involves outputting two +% marks for the sectioning macros, one before the section break, and +% one after. I won't pretend I can describe this better than DEK... +\def\domark{% + \toks0=\expandafter{\lastchapterdefs}% + \toks2=\expandafter{\lastsectiondefs}% + \toks4=\expandafter{\prevchapterdefs}% + \toks6=\expandafter{\prevsectiondefs}% + \toks8=\expandafter{\lastcolordefs}% + \mark{% + \the\toks0 \the\toks2 + \noexpand\or \the\toks4 \the\toks6 + \noexpand\else \the\toks8 + }% +} +% \topmark doesn't work for the very first chapter (after the title +% page or the contents), so we use \firstmark there -- this gets us +% the mark with the chapter defs, unless the user sneaks in, e.g., +% @setcolor (or @url, or @link, etc.) between @contents and the very +% first @chapter. +\def\gettopheadingmarks{% + \ifcase0\topmark\fi + \ifx\thischapter\empty \ifcase0\firstmark\fi \fi +} +\def\getbottomheadingmarks{\ifcase1\botmark\fi} +\def\getcolormarks{\ifcase2\topmark\fi} + +% Avoid "undefined control sequence" errors. +\def\lastchapterdefs{} +\def\lastsectiondefs{} +\def\prevchapterdefs{} +\def\prevsectiondefs{} +\def\lastcolordefs{} + +% Main output routine. +\chardef\PAGE = 255 +\output = {\onepageout{\pagecontents\PAGE}} + +\newbox\headlinebox +\newbox\footlinebox + +% \onepageout takes a vbox as an argument. Note that \pagecontents +% does insertions, but you have to call it yourself. +\def\onepageout#1{% + \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi + % + \ifodd\pageno \advance\hoffset by \bindingoffset + \else \advance\hoffset by -\bindingoffset\fi + % + % Do this outside of the \shipout so @code etc. will be expanded in + % the headline as they should be, not taken literally (outputting ''code). + \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi + \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% + \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi + \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% + % + {% + % Have to do this stuff outside the \shipout because we want it to + % take effect in \write's, yet the group defined by the \vbox ends + % before the \shipout runs. + % + \indexdummies % don't expand commands in the output. + \normalturnoffactive % \ in index entries must not stay \, e.g., if + % the page break happens to be in the middle of an example. + % We don't want .vr (or whatever) entries like this: + % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}} + % "\acronym" won't work when it's read back in; + % it needs to be + % {\code {{\tt \backslashcurfont }acronym} + \shipout\vbox{% + % Do this early so pdf references go to the beginning of the page. + \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi + % + \ifcropmarks \vbox to \outervsize\bgroup + \hsize = \outerhsize + \vskip-\topandbottommargin + \vtop to0pt{% + \line{\ewtop\hfil\ewtop}% + \nointerlineskip + \line{% + \vbox{\moveleft\cornerthick\nstop}% + \hfill + \vbox{\moveright\cornerthick\nstop}% + }% + \vss}% + \vskip\topandbottommargin + \line\bgroup + \hfil % center the page within the outer (page) hsize. + \ifodd\pageno\hskip\bindingoffset\fi + \vbox\bgroup + \fi + % + \unvbox\headlinebox + \pagebody{#1}% + \ifdim\ht\footlinebox > 0pt + % Only leave this space if the footline is nonempty. + % (We lessened \vsize for it in \oddfootingyyy.) + % The \baselineskip=24pt in plain's \makefootline has no effect. + \vskip 24pt + \unvbox\footlinebox + \fi + % + \ifcropmarks + \egroup % end of \vbox\bgroup + \hfil\egroup % end of (centering) \line\bgroup + \vskip\topandbottommargin plus1fill minus1fill + \boxmaxdepth = \cornerthick + \vbox to0pt{\vss + \line{% + \vbox{\moveleft\cornerthick\nsbot}% + \hfill + \vbox{\moveright\cornerthick\nsbot}% + }% + \nointerlineskip + \line{\ewbot\hfil\ewbot}% + }% + \egroup % \vbox from first cropmarks clause + \fi + }% end of \shipout\vbox + }% end of group with \indexdummies + \advancepageno + \ifnum\outputpenalty>-20000 \else\dosupereject\fi +} + +\newinsert\margin \dimen\margin=\maxdimen + +\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} +{\catcode`\@ =11 +\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi +% marginal hacks, juha@viisa.uucp (Juha Takala) +\ifvoid\margin\else % marginal info is present + \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi +\dimen@=\dp#1\relax \unvbox#1\relax +\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi +\ifr@ggedbottom \kern-\dimen@ \vfil \fi} +} + +% Here are the rules for the cropmarks. Note that they are +% offset so that the space between them is truly \outerhsize or \outervsize +% (P. A. MacKay, 12 November, 1986) +% +\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} +\def\nstop{\vbox + {\hrule height\cornerthick depth\cornerlong width\cornerthick}} +\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} +\def\nsbot{\vbox + {\hrule height\cornerlong depth\cornerthick width\cornerthick}} + +% Parse an argument, then pass it to #1. The argument is the rest of +% the input line (except we remove a trailing comment). #1 should be a +% macro which expects an ordinary undelimited TeX argument. +% +\def\parsearg{\parseargusing{}} +\def\parseargusing#1#2{% + \def\argtorun{#2}% + \begingroup + \obeylines + \spaceisspace + #1% + \parseargline\empty% Insert the \empty token, see \finishparsearg below. +} + +{\obeylines % + \gdef\parseargline#1^^M{% + \endgroup % End of the group started in \parsearg. + \argremovecomment #1\comment\ArgTerm% + }% +} + +% First remove any @comment, then any @c comment. +\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} +\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} + +% Each occurrence of `\^^M' or `\^^M' is replaced by a single space. +% +% \argremovec might leave us with trailing space, e.g., +% @end itemize @c foo +% This space token undergoes the same procedure and is eventually removed +% by \finishparsearg. +% +\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M} +\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M} +\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% + \def\temp{#3}% + \ifx\temp\empty + % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp: + \let\temp\finishparsearg + \else + \let\temp\argcheckspaces + \fi + % Put the space token in: + \temp#1 #3\ArgTerm +} + +% If a _delimited_ argument is enclosed in braces, they get stripped; so +% to get _exactly_ the rest of the line, we had to prevent such situation. +% We prepended an \empty token at the very beginning and we expand it now, +% just before passing the control to \argtorun. +% (Similarly, we have to think about #3 of \argcheckspacesY above: it is +% either the null string, or it ends with \^^M---thus there is no danger +% that a pair of braces would be stripped. +% +% But first, we have to remove the trailing space token. +% +\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}} + +% \parseargdef\foo{...} +% is roughly equivalent to +% \def\foo{\parsearg\Xfoo} +% \def\Xfoo#1{...} +% +% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my +% favourite TeX trick. --kasal, 16nov03 + +\def\parseargdef#1{% + \expandafter \doparseargdef \csname\string#1\endcsname #1% +} +\def\doparseargdef#1#2{% + \def#2{\parsearg#1}% + \def#1##1% +} + +% Several utility definitions with active space: +{ + \obeyspaces + \gdef\obeyedspace{ } + + % Make each space character in the input produce a normal interword + % space in the output. Don't allow a line break at this space, as this + % is used only in environments like @example, where each line of input + % should produce a line of output anyway. + % + \gdef\sepspaces{\obeyspaces\let =\tie} + + % If an index command is used in an @example environment, any spaces + % therein should become regular spaces in the raw index file, not the + % expansion of \tie (\leavevmode \penalty \@M \ ). + \gdef\unsepspaces{\let =\space} +} + + +\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} + +% Define the framework for environments in texinfo.tex. It's used like this: +% +% \envdef\foo{...} +% \def\Efoo{...} +% +% It's the responsibility of \envdef to insert \begingroup before the +% actual body; @end closes the group after calling \Efoo. \envdef also +% defines \thisenv, so the current environment is known; @end checks +% whether the environment name matches. The \checkenv macro can also be +% used to check whether the current environment is the one expected. +% +% Non-false conditionals (@iftex, @ifset) don't fit into this, so they +% are not treated as environments; they don't open a group. (The +% implementation of @end takes care not to call \endgroup in this +% special case.) + + +% At run-time, environments start with this: +\def\startenvironment#1{\begingroup\def\thisenv{#1}} +% initialize +\let\thisenv\empty + +% ... but they get defined via ``\envdef\foo{...}'': +\long\def\envdef#1#2{\def#1{\startenvironment#1#2}} +\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}} + +% Check whether we're in the right environment: +\def\checkenv#1{% + \def\temp{#1}% + \ifx\thisenv\temp + \else + \badenverr + \fi +} + +% Environment mismatch, #1 expected: +\def\badenverr{% + \errhelp = \EMsimple + \errmessage{This command can appear only \inenvironment\temp, + not \inenvironment\thisenv}% +} +\def\inenvironment#1{% + \ifx#1\empty + out of any environment% + \else + in environment \expandafter\string#1% + \fi +} + +% @end foo executes the definition of \Efoo. +% But first, it executes a specialized version of \checkenv +% +\parseargdef\end{% + \if 1\csname iscond.#1\endcsname + \else + % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 + \expandafter\checkenv\csname#1\endcsname + \csname E#1\endcsname + \endgroup + \fi +} + +\newhelp\EMsimple{Press RETURN to continue.} + + +%% Simple single-character @ commands + +% @@ prints an @ +% Kludge this until the fonts are right (grr). +\def\@{{\tt\char64}} + +% This is turned off because it was never documented +% and you can use @w{...} around a quote to suppress ligatures. +%% Define @` and @' to be the same as ` and ' +%% but suppressing ligatures. +%\def\`{{`}} +%\def\'{{'}} + +% Used to generate quoted braces. +\def\mylbrace {{\tt\char123}} +\def\myrbrace {{\tt\char125}} +\let\{=\mylbrace +\let\}=\myrbrace +\begingroup + % Definitions to produce \{ and \} commands for indices, + % and @{ and @} for the aux/toc files. + \catcode`\{ = \other \catcode`\} = \other + \catcode`\[ = 1 \catcode`\] = 2 + \catcode`\! = 0 \catcode`\\ = \other + !gdef!lbracecmd[\{]% + !gdef!rbracecmd[\}]% + !gdef!lbraceatcmd[@{]% + !gdef!rbraceatcmd[@}]% +!endgroup + +% @comma{} to avoid , parsing problems. +\let\comma = , + +% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent +% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. +\let\, = \c +\let\dotaccent = \. +\def\ringaccent#1{{\accent23 #1}} +\let\tieaccent = \t +\let\ubaraccent = \b +\let\udotaccent = \d + +% Other special characters: @questiondown @exclamdown @ordf @ordm +% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. +\def\questiondown{?`} +\def\exclamdown{!`} +\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} +\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} + +% Dotless i and dotless j, used for accents. +\def\imacro{i} +\def\jmacro{j} +\def\dotless#1{% + \def\temp{#1}% + \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi + \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi + \else \errmessage{@dotless can be used only with i or j}% + \fi\fi +} + +% The \TeX{} logo, as in plain, but resetting the spacing so that a +% period following counts as ending a sentence. (Idea found in latex.) +% +\edef\TeX{\TeX \spacefactor=1000 } + +% @LaTeX{} logo. Not quite the same results as the definition in +% latex.ltx, since we use a different font for the raised A; it's most +% convenient for us to use an explicitly smaller font, rather than using +% the \scriptstyle font (since we don't reset \scriptstyle and +% \scriptscriptstyle). +% +\def\LaTeX{% + L\kern-.36em + {\setbox0=\hbox{T}% + \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}% + \kern-.15em + \TeX +} + +% Be sure we're in horizontal mode when doing a tie, since we make space +% equivalent to this in @example-like environments. Otherwise, a space +% at the beginning of a line will start with \penalty -- and +% since \penalty is valid in vertical mode, we'd end up putting the +% penalty on the vertical list instead of in the new paragraph. +{\catcode`@ = 11 + % Avoid using \@M directly, because that causes trouble + % if the definition is written into an index file. + \global\let\tiepenalty = \@M + \gdef\tie{\leavevmode\penalty\tiepenalty\ } +} + +% @: forces normal size whitespace following. +\def\:{\spacefactor=1000 } + +% @* forces a line break. +\def\*{\hfil\break\hbox{}\ignorespaces} + +% @/ allows a line break. +\let\/=\allowbreak + +% @. is an end-of-sentence period. +\def\.{.\spacefactor=\endofsentencespacefactor\space} + +% @! is an end-of-sentence bang. +\def\!{!\spacefactor=\endofsentencespacefactor\space} + +% @? is an end-of-sentence query. +\def\?{?\spacefactor=\endofsentencespacefactor\space} + +% @frenchspacing on|off says whether to put extra space after punctuation. +% +\def\onword{on} +\def\offword{off} +% +\parseargdef\frenchspacing{% + \def\temp{#1}% + \ifx\temp\onword \plainfrenchspacing + \else\ifx\temp\offword \plainnonfrenchspacing + \else + \errhelp = \EMsimple + \errmessage{Unknown @frenchspacing option `\temp', must be on/off}% + \fi\fi +} + +% @w prevents a word break. Without the \leavevmode, @w at the +% beginning of a paragraph, when TeX is still in vertical mode, would +% produce a whole line of output instead of starting the paragraph. +\def\w#1{\leavevmode\hbox{#1}} + +% @group ... @end group forces ... to be all on one page, by enclosing +% it in a TeX vbox. We use \vtop instead of \vbox to construct the box +% to keep its height that of a normal line. According to the rules for +% \topskip (p.114 of the TeXbook), the glue inserted is +% max (\topskip - \ht (first item), 0). If that height is large, +% therefore, no glue is inserted, and the space between the headline and +% the text is small, which looks bad. +% +% Another complication is that the group might be very large. This can +% cause the glue on the previous page to be unduly stretched, because it +% does not have much material. In this case, it's better to add an +% explicit \vfill so that the extra space is at the bottom. The +% threshold for doing this is if the group is more than \vfilllimit +% percent of a page (\vfilllimit can be changed inside of @tex). +% +\newbox\groupbox +\def\vfilllimit{0.7} +% +\envdef\group{% + \ifnum\catcode`\^^M=\active \else + \errhelp = \groupinvalidhelp + \errmessage{@group invalid in context where filling is enabled}% + \fi + \startsavinginserts + % + \setbox\groupbox = \vtop\bgroup + % Do @comment since we are called inside an environment such as + % @example, where each end-of-line in the input causes an + % end-of-line in the output. We don't want the end-of-line after + % the `@group' to put extra space in the output. Since @group + % should appear on a line by itself (according to the Texinfo + % manual), we don't worry about eating any user text. + \comment +} +% +% The \vtop produces a box with normal height and large depth; thus, TeX puts +% \baselineskip glue before it, and (when the next line of text is done) +% \lineskip glue after it. Thus, space below is not quite equal to space +% above. But it's pretty close. +\def\Egroup{% + % To get correct interline space between the last line of the group + % and the first line afterwards, we have to propagate \prevdepth. + \endgraf % Not \par, as it may have been set to \lisppar. + \global\dimen1 = \prevdepth + \egroup % End the \vtop. + % \dimen0 is the vertical size of the group's box. + \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox + % \dimen2 is how much space is left on the page (more or less). + \dimen2 = \pageheight \advance\dimen2 by -\pagetotal + % if the group doesn't fit on the current page, and it's a big big + % group, force a page break. + \ifdim \dimen0 > \dimen2 + \ifdim \pagetotal < \vfilllimit\pageheight + \page + \fi + \fi + \box\groupbox + \prevdepth = \dimen1 + \checkinserts +} +% +% TeX puts in an \escapechar (i.e., `@') at the beginning of the help +% message, so this ends up printing `@group can only ...'. +% +\newhelp\groupinvalidhelp{% +group can only be used in environments such as @example,^^J% +where each line of input produces a line of output.} + +% @need space-in-mils +% forces a page break if there is not space-in-mils remaining. + +\newdimen\mil \mil=0.001in + +% Old definition--didn't work. +%\parseargdef\need{\par % +%% This method tries to make TeX break the page naturally +%% if the depth of the box does not fit. +%{\baselineskip=0pt% +%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak +%\prevdepth=-1000pt +%}} + +\parseargdef\need{% + % Ensure vertical mode, so we don't make a big box in the middle of a + % paragraph. + \par + % + % If the @need value is less than one line space, it's useless. + \dimen0 = #1\mil + \dimen2 = \ht\strutbox + \advance\dimen2 by \dp\strutbox + \ifdim\dimen0 > \dimen2 + % + % Do a \strut just to make the height of this box be normal, so the + % normal leading is inserted relative to the preceding line. + % And a page break here is fine. + \vtop to #1\mil{\strut\vfil}% + % + % TeX does not even consider page breaks if a penalty added to the + % main vertical list is 10000 or more. But in order to see if the + % empty box we just added fits on the page, we must make it consider + % page breaks. On the other hand, we don't want to actually break the + % page after the empty box. So we use a penalty of 9999. + % + % There is an extremely small chance that TeX will actually break the + % page at this \penalty, if there are no other feasible breakpoints in + % sight. (If the user is using lots of big @group commands, which + % almost-but-not-quite fill up a page, TeX will have a hard time doing + % good page breaking, for example.) However, I could not construct an + % example where a page broke at this \penalty; if it happens in a real + % document, then we can reconsider our strategy. + \penalty9999 + % + % Back up by the size of the box, whether we did a page break or not. + \kern -#1\mil + % + % Do not allow a page break right after this kern. + \nobreak + \fi +} + +% @br forces paragraph break (and is undocumented). + +\let\br = \par + +% @page forces the start of a new page. +% +\def\page{\par\vfill\supereject} + +% @exdent text.... +% outputs text on separate line in roman font, starting at standard page margin + +% This records the amount of indent in the innermost environment. +% That's how much \exdent should take out. +\newskip\exdentamount + +% This defn is used inside fill environments such as @defun. +\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break} + +% This defn is used inside nofill environments such as @example. +\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount + \leftline{\hskip\leftskip{\rm#1}}}} + +% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current +% paragraph. For more general purposes, use the \margin insertion +% class. WHICH is `l' or `r'. +% +\newskip\inmarginspacing \inmarginspacing=1cm +\def\strutdepth{\dp\strutbox} +% +\def\doinmargin#1#2{\strut\vadjust{% + \nobreak + \kern-\strutdepth + \vtop to \strutdepth{% + \baselineskip=\strutdepth + \vss + % if you have multiple lines of stuff to put here, you'll need to + % make the vbox yourself of the appropriate size. + \ifx#1l% + \llap{\ignorespaces #2\hskip\inmarginspacing}% + \else + \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}% + \fi + \null + }% +}} +\def\inleftmargin{\doinmargin l} +\def\inrightmargin{\doinmargin r} +% +% @inmargin{TEXT [, RIGHT-TEXT]} +% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right; +% else use TEXT for both). +% +\def\inmargin#1{\parseinmargin #1,,\finish} +\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing. + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \def\lefttext{#1}% have both texts + \def\righttext{#2}% + \else + \def\lefttext{#1}% have only one text + \def\righttext{#1}% + \fi + % + \ifodd\pageno + \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin + \else + \def\temp{\inleftmargin\lefttext}% + \fi + \temp +} + +% @include FILE -- \input text of FILE. +% +\def\include{\parseargusing\filenamecatcodes\includezzz} +\def\includezzz#1{% + \pushthisfilestack + \def\thisfile{#1}% + {% + \makevalueexpandable % we want to expand any @value in FILE. + \turnoffactive % and allow special characters in the expansion + \indexnofonts % Allow `@@' and other weird things in file names. + \edef\temp{\noexpand\input #1 }% + % + % This trickery is to read FILE outside of a group, in case it makes + % definitions, etc. + \expandafter + }\temp + \popthisfilestack +} +\def\filenamecatcodes{% + \catcode`\\=\other + \catcode`~=\other + \catcode`^=\other + \catcode`_=\other + \catcode`|=\other + \catcode`<=\other + \catcode`>=\other + \catcode`+=\other + \catcode`-=\other + \catcode`\`=\other + \catcode`\'=\other +} + +\def\pushthisfilestack{% + \expandafter\pushthisfilestackX\popthisfilestack\StackTerm +} +\def\pushthisfilestackX{% + \expandafter\pushthisfilestackY\thisfile\StackTerm +} +\def\pushthisfilestackY #1\StackTerm #2\StackTerm {% + \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}% +} + +\def\popthisfilestack{\errthisfilestackempty} +\def\errthisfilestackempty{\errmessage{Internal error: + the stack of filenames is empty.}} + +\def\thisfile{} + +% @center line +% outputs that line, centered. +% +\parseargdef\center{% + \ifhmode + \let\next\centerH + \else + \let\next\centerV + \fi + \next{\hfil \ignorespaces#1\unskip \hfil}% +} +\def\centerH#1{% + {% + \hfil\break + \advance\hsize by -\leftskip + \advance\hsize by -\rightskip + \line{#1}% + \break + }% +} +\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}} + +% @sp n outputs n lines of vertical space + +\parseargdef\sp{\vskip #1\baselineskip} + +% @comment ...line which is ignored... +% @c is the same as @comment +% @ignore ... @end ignore is another way to write a comment + +\def\comment{\begingroup \catcode`\^^M=\other% +\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% +\commentxxx} +{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} + +\let\c=\comment + +% @paragraphindent NCHARS +% We'll use ems for NCHARS, close enough. +% NCHARS can also be the word `asis' or `none'. +% We cannot feasibly implement @paragraphindent asis, though. +% +\def\asisword{asis} % no translation, these are keywords +\def\noneword{none} +% +\parseargdef\paragraphindent{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \defaultparindent = 0pt + \else + \defaultparindent = #1em + \fi + \fi + \parindent = \defaultparindent +} + +% @exampleindent NCHARS +% We'll use ems for NCHARS like @paragraphindent. +% It seems @exampleindent asis isn't necessary, but +% I preserve it to make it similar to @paragraphindent. +\parseargdef\exampleindent{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \lispnarrowing = 0pt + \else + \lispnarrowing = #1em + \fi + \fi +} + +% @firstparagraphindent WORD +% If WORD is `none', then suppress indentation of the first paragraph +% after a section heading. If WORD is `insert', then do indent at such +% paragraphs. +% +% The paragraph indentation is suppressed or not by calling +% \suppressfirstparagraphindent, which the sectioning commands do. +% We switch the definition of this back and forth according to WORD. +% By default, we suppress indentation. +% +\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent} +\def\insertword{insert} +% +\parseargdef\firstparagraphindent{% + \def\temp{#1}% + \ifx\temp\noneword + \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent + \else\ifx\temp\insertword + \let\suppressfirstparagraphindent = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @firstparagraphindent option `\temp'}% + \fi\fi +} + +% Here is how we actually suppress indentation. Redefine \everypar to +% \kern backwards by \parindent, and then reset itself to empty. +% +% We also make \indent itself not actually do anything until the next +% paragraph. +% +\gdef\dosuppressfirstparagraphindent{% + \gdef\indent{% + \restorefirstparagraphindent + \indent + }% + \gdef\noindent{% + \restorefirstparagraphindent + \noindent + }% + \global\everypar = {% + \kern -\parindent + \restorefirstparagraphindent + }% +} + +\gdef\restorefirstparagraphindent{% + \global \let \indent = \ptexindent + \global \let \noindent = \ptexnoindent + \global \everypar = {}% +} + + +% @asis just yields its argument. Used with @table, for example. +% +\def\asis#1{#1} + +% @math outputs its argument in math mode. +% +% One complication: _ usually means subscripts, but it could also mean +% an actual _ character, as in @math{@var{some_variable} + 1}. So make +% _ active, and distinguish by seeing if the current family is \slfam, +% which is what @var uses. +{ + \catcode`\_ = \active + \gdef\mathunderscore{% + \catcode`\_=\active + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% + } +} +% Another complication: we want \\ (and @\) to output a \ character. +% FYI, plain.tex uses \\ as a temporary control sequence (why?), but +% this is not advertised and we don't care. Texinfo does not +% otherwise define @\. +% +% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. +\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} +% +\def\math{% + \tex + \mathunderscore + \let\\ = \mathbackslash + \mathactive + % make the texinfo accent commands work in math mode + \let\"=\ddot + \let\'=\acute + \let\==\bar + \let\^=\hat + \let\`=\grave + \let\u=\breve + \let\v=\check + \let\~=\tilde + \let\dotaccent=\dot + $\finishmath +} +\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. + +% Some active characters (such as <) are spaced differently in math. +% We have to reset their definitions in case the @math was an argument +% to a command which sets the catcodes (such as @item or @section). +% +{ + \catcode`^ = \active + \catcode`< = \active + \catcode`> = \active + \catcode`+ = \active + \catcode`' = \active + \gdef\mathactive{% + \let^ = \ptexhat + \let< = \ptexless + \let> = \ptexgtr + \let+ = \ptexplus + \let' = \ptexquoteright + } +} + +% Some math mode symbols. +\def\bullet{$\ptexbullet$} +\def\geq{\ifmmode \ge\else $\ge$\fi} +\def\leq{\ifmmode \le\else $\le$\fi} +\def\minus{\ifmmode -\else $-$\fi} + +% @dots{} outputs an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in the cm +% typewriter fonts as three actual period characters; on the other hand, +% in other typewriter fonts three periods are wider than 1.5em. So do +% whichever is larger. +% +\def\dots{% + \leavevmode + \setbox0=\hbox{...}% get width of three periods + \ifdim\wd0 > 1.5em + \dimen0 = \wd0 + \else + \dimen0 = 1.5em + \fi + \hbox to \dimen0{% + \hskip 0pt plus.25fil + .\hskip 0pt plus1fil + .\hskip 0pt plus1fil + .\hskip 0pt plus.5fil + }% +} + +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \dots + \spacefactor=\endofsentencespacefactor +} + +% @comma{} is so commas can be inserted into text without messing up +% Texinfo's parsing. +% +\let\comma = , + +% @refill is a no-op. +\let\refill=\relax + +% If working on a large document in chapters, it is convenient to +% be able to disable indexing, cross-referencing, and contents, for test runs. +% This is done with @novalidate (before @setfilename). +% +\newif\iflinks \linkstrue % by default we want the aux files. +\let\novalidate = \linksfalse + +% @setfilename is done at the beginning of every texinfo file. +% So open here the files we need to have open while reading the input. +% This makes it possible to make a .fmt file for texinfo. +\def\setfilename{% + \fixbackslash % Turn off hack to swallow `\input texinfo'. + \iflinks + \tryauxfile + % Open the new aux file. TeX will close it automatically at exit. + \immediate\openout\auxfile=\jobname.aux + \fi % \openindices needs to do some work in any case. + \openindices + \let\setfilename=\comment % Ignore extra @setfilename cmds. + % + % If texinfo.cnf is present on the system, read it. + % Useful for site-wide @afourpaper, etc. + \openin 1 texinfo.cnf + \ifeof 1 \else \input texinfo.cnf \fi + \closein 1 + % + \comment % Ignore the actual filename. +} + +% Called from \setfilename. +% +\def\openindices{% + \newindex{cp}% + \newcodeindex{fn}% + \newcodeindex{vr}% + \newcodeindex{tp}% + \newcodeindex{ky}% + \newcodeindex{pg}% +} + +% @bye. +\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} + + +\message{pdf,} +% adobe `portable' document format +\newcount\tempnum +\newcount\lnkcount +\newtoks\filename +\newcount\filenamelength +\newcount\pgn +\newtoks\toksA +\newtoks\toksB +\newtoks\toksC +\newtoks\toksD +\newbox\boxA +\newcount\countA +\newif\ifpdf +\newif\ifpdfmakepagedest + +% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 +% can be set). So we test for \relax and 0 as well as \undefined, +% borrowed from ifpdf.sty. +\ifx\pdfoutput\undefined +\else + \ifx\pdfoutput\relax + \else + \ifcase\pdfoutput + \else + \pdftrue + \fi + \fi +\fi + +% PDF uses PostScript string constants for the names of xref targets, +% for display in the outlines, and in other places. Thus, we have to +% double any backslashes. Otherwise, a name like "\node" will be +% interpreted as a newline (\n), followed by o, d, e. Not good. +% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html +% (and related messages, the final outcome is that it is up to the TeX +% user to double the backslashes and otherwise make the string valid, so +% that's what we do). + +% double active backslashes. +% +{\catcode`\@=0 \catcode`\\=\active + @gdef@activebackslashdouble{% + @catcode`@\=@active + @let\=@doublebackslash} +} + +% To handle parens, we must adopt a different approach, since parens are +% not active characters. hyperref.dtx (which has the same problem as +% us) handles it with this amazing macro to replace tokens, with minor +% changes for Texinfo. It is included here under the GPL by permission +% from the author, Heiko Oberdiek. +% +% #1 is the tokens to replace. +% #2 is the replacement. +% #3 is the control sequence with the string. +% +\def\HyPsdSubst#1#2#3{% + \def\HyPsdReplace##1#1##2\END{% + ##1% + \ifx\\##2\\% + \else + #2% + \HyReturnAfterFi{% + \HyPsdReplace##2\END + }% + \fi + }% + \xdef#3{\expandafter\HyPsdReplace#3#1\END}% +} +\long\def\HyReturnAfterFi#1\fi{\fi#1} + +% #1 is a control sequence in which to do the replacements. +\def\backslashparens#1{% + \xdef#1{#1}% redefine it as its expansion; the definition is simply + % \lastnode when called from \setref -> \pdfmkdest. + \HyPsdSubst{(}{\realbackslash(}{#1}% + \HyPsdSubst{)}{\realbackslash)}{#1}% +} + +\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images +with PDF output, and none of those formats could be found. (.eps cannot +be supported due to the design of the PDF format; use regular TeX (DVI +output) for that.)} + +\ifpdf + % + % Color manipulation macros based on pdfcolor.tex, + % except using rgb instead of cmyk; the latter is said to render as a + % very dark gray on-screen and a very dark halftone in print, instead + % of actual black. + \def\rgbDarkRed{0.50 0.09 0.12} + \def\rgbBlack{0 0 0} + % + % k sets the color for filling (usual text, etc.); + % K sets the color for stroking (thin rules, e.g., normal _'s). + \def\pdfsetcolor#1{\pdfliteral{#1 rg #1 RG}} + % + % Set color, and create a mark which defines \thiscolor accordingly, + % so that \makeheadline knows which color to restore. + \def\setcolor#1{% + \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}% + \domark + \pdfsetcolor{#1}% + } + % + \def\maincolor{\rgbBlack} + \pdfsetcolor{\maincolor} + \edef\thiscolor{\maincolor} + \def\lastcolordefs{} + % + \def\makefootline{% + \baselineskip24pt + \line{\pdfsetcolor{\maincolor}\the\footline}% + } + % + \def\makeheadline{% + \vbox to 0pt{% + \vskip-22.5pt + \line{% + \vbox to8.5pt{}% + % Extract \thiscolor definition from the marks. + \getcolormarks + % Typeset the headline with \maincolor, then restore the color. + \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}% + }% + \vss + }% + \nointerlineskip + } + % + % + \pdfcatalog{/PageMode /UseOutlines} + % + % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto). + \def\dopdfimage#1#2#3{% + \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% + \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% + % + % pdftex (and the PDF format) support .png, .jpg, .pdf (among + % others). Let's try in that order. + \let\pdfimgext=\empty + \begingroup + \openin 1 #1.png \ifeof 1 + \openin 1 #1.jpg \ifeof 1 + \openin 1 #1.jpeg \ifeof 1 + \openin 1 #1.JPG \ifeof 1 + \openin 1 #1.pdf \ifeof 1 + \openin 1 #1.PDF \ifeof 1 + \errhelp = \nopdfimagehelp + \errmessage{Could not find image file #1 for pdf}% + \else \gdef\pdfimgext{PDF}% + \fi + \else \gdef\pdfimgext{pdf}% + \fi + \else \gdef\pdfimgext{JPG}% + \fi + \else \gdef\pdfimgext{jpeg}% + \fi + \else \gdef\pdfimgext{jpg}% + \fi + \else \gdef\pdfimgext{png}% + \fi + \closein 1 + \endgroup + % + % without \immediate, ancient pdftex seg faults when the same image is + % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) + \ifnum\pdftexversion < 14 + \immediate\pdfimage + \else + \immediate\pdfximage + \fi + \ifdim \wd0 >0pt width \imagewidth \fi + \ifdim \wd2 >0pt height \imageheight \fi + \ifnum\pdftexversion<13 + #1.\pdfimgext + \else + {#1.\pdfimgext}% + \fi + \ifnum\pdftexversion < 14 \else + \pdfrefximage \pdflastximage + \fi} + % + \def\pdfmkdest#1{{% + % We have to set dummies so commands such as @code, and characters + % such as \, aren't expanded when present in a section title. + \indexnofonts + \turnoffactive + \activebackslashdouble + \makevalueexpandable + \def\pdfdestname{#1}% + \backslashparens\pdfdestname + \safewhatsit{\pdfdest name{\pdfdestname} xyz}% + }} + % + % used to mark target names; must be expandable. + \def\pdfmkpgn#1{#1} + % + % by default, use a color that is dark enough to print on paper as + % nearly black, but still distinguishable for online viewing. + \def\urlcolor{\rgbDarkRed} + \def\linkcolor{\rgbDarkRed} + \def\endlink{\setcolor{\maincolor}\pdfendlink} + % + % Adding outlines to PDF; macros for calculating structure of outlines + % come from Petr Olsak + \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% + \else \csname#1\endcsname \fi} + \def\advancenumber#1{\tempnum=\expnumber{#1}\relax + \advance\tempnum by 1 + \expandafter\xdef\csname#1\endcsname{\the\tempnum}} + % + % #1 is the section text, which is what will be displayed in the + % outline by the pdf viewer. #2 is the pdf expression for the number + % of subentries (or empty, for subsubsections). #3 is the node text, + % which might be empty if this toc entry had no corresponding node. + % #4 is the page number + % + \def\dopdfoutline#1#2#3#4{% + % Generate a link to the node text if that exists; else, use the + % page number. We could generate a destination for the section + % text in the case where a section has no node, but it doesn't + % seem worth the trouble, since most documents are normally structured. + \def\pdfoutlinedest{#3}% + \ifx\pdfoutlinedest\empty + \def\pdfoutlinedest{#4}% + \else + % Doubled backslashes in the name. + {\activebackslashdouble \xdef\pdfoutlinedest{#3}% + \backslashparens\pdfoutlinedest}% + \fi + % + % Also double the backslashes in the display string. + {\activebackslashdouble \xdef\pdfoutlinetext{#1}% + \backslashparens\pdfoutlinetext}% + % + \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% + } + % + \def\pdfmakeoutlines{% + \begingroup + % Thanh's hack / proper braces in bookmarks + \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace + \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace + % + % Read toc silently, to get counts of subentries for \pdfoutline. + \def\numchapentry##1##2##3##4{% + \def\thischapnum{##2}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + }% + \def\numsecentry##1##2##3##4{% + \advancenumber{chap\thischapnum}% + \def\thissecnum{##2}% + \def\thissubsecnum{0}% + }% + \def\numsubsecentry##1##2##3##4{% + \advancenumber{sec\thissecnum}% + \def\thissubsecnum{##2}% + }% + \def\numsubsubsecentry##1##2##3##4{% + \advancenumber{subsec\thissubsecnum}% + }% + \def\thischapnum{0}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + % + % use \def rather than \let here because we redefine \chapentry et + % al. a second time, below. + \def\appentry{\numchapentry}% + \def\appsecentry{\numsecentry}% + \def\appsubsecentry{\numsubsecentry}% + \def\appsubsubsecentry{\numsubsubsecentry}% + \def\unnchapentry{\numchapentry}% + \def\unnsecentry{\numsecentry}% + \def\unnsubsecentry{\numsubsecentry}% + \def\unnsubsubsecentry{\numsubsubsecentry}% + \readdatafile{toc}% + % + % Read toc second time, this time actually producing the outlines. + % The `-' means take the \expnumber as the absolute number of + % subentries, which we calculated on our first read of the .toc above. + % + % We use the node names as the destinations. + \def\numchapentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% + \def\numsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% + \def\numsubsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}% + \def\numsubsubsecentry##1##2##3##4{% count is always zero + \dopdfoutline{##1}{}{##3}{##4}}% + % + % PDF outlines are displayed using system fonts, instead of + % document fonts. Therefore we cannot use special characters, + % since the encoding is unknown. For example, the eogonek from + % Latin 2 (0xea) gets translated to a | character. Info from + % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. + % + % xx to do this right, we have to translate 8-bit characters to + % their "best" equivalent, based on the @documentencoding. Right + % now, I guess we'll just let the pdf reader have its way. + \indexnofonts + \setupdatafile + \catcode`\\=\active \otherbackslash + \input \tocreadfilename + \endgroup + } + % + \def\skipspaces#1{\def\PP{#1}\def\D{|}% + \ifx\PP\D\let\nextsp\relax + \else\let\nextsp\skipspaces + \ifx\p\space\else\addtokens{\filename}{\PP}% + \advance\filenamelength by 1 + \fi + \fi + \nextsp} + \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} + \ifnum\pdftexversion < 14 + \let \startlink \pdfannotlink + \else + \let \startlink \pdfstartlink + \fi + % make a live url in pdf output. + \def\pdfurl#1{% + \begingroup + % it seems we really need yet another set of dummies; have not + % tried to figure out what each command should do in the context + % of @url. for now, just make @/ a no-op, that's the only one + % people have actually reported a problem with. + % + \normalturnoffactive + \def\@{@}% + \let\/=\empty + \makevalueexpandable + % do we want to go so far as to use \indexnofonts instead of just + % special-casing \var here? + \def\var##1{##1}% + % + \leavevmode\setcolor{\urlcolor}% + \startlink attr{/Border [0 0 0]}% + user{/Subtype /Link /A << /S /URI /URI (#1) >>}% + \endgroup} + \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} + \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} + \def\maketoks{% + \expandafter\poptoks\the\toksA|ENDTOKS|\relax + \ifx\first0\adn0 + \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 + \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 + \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 + \else + \ifnum0=\countA\else\makelink\fi + \ifx\first.\let\next=\done\else + \let\next=\maketoks + \addtokens{\toksB}{\the\toksD} + \ifx\first,\addtokens{\toksB}{\space}\fi + \fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \next} + \def\makelink{\addtokens{\toksB}% + {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} + \def\pdflink#1{% + \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} + \setcolor{\linkcolor}#1\endlink} + \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} +\else + % non-pdf mode + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\setcolor = \gobble + \let\pdfsetcolor = \gobble + \let\pdfmakeoutlines = \relax +\fi % \ifx\pdfoutput + + +\message{fonts,} + +% Change the current font style to #1, remembering it in \curfontstyle. +% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in +% italics, not bold italics. +% +\def\setfontstyle#1{% + \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. + \csname ten#1\endcsname % change the current font +} + +% Select #1 fonts with the current style. +% +\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} + +\def\rm{\fam=0 \setfontstyle{rm}} +\def\it{\fam=\itfam \setfontstyle{it}} +\def\sl{\fam=\slfam \setfontstyle{sl}} +\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} +\def\tt{\fam=\ttfam \setfontstyle{tt}} + +% Unfortunately, we have to override this for titles and the like, since +% in those cases "rm" is bold. Sigh. +\def\rmisbold{\rm\def\curfontstyle{bf}} + +% Texinfo sort of supports the sans serif font style, which plain TeX does not. +% So we set up a \sf. +\newfam\sffam +\def\sf{\fam=\sffam \setfontstyle{sf}} +\let\li = \sf % Sometimes we call it \li, not \sf. + +% We don't need math for this font style. +\def\ttsl{\setfontstyle{ttsl}} + + +% Default leading. +\newdimen\textleading \textleading = 13.2pt + +% Set the baselineskip to #1, and the lineskip and strut size +% correspondingly. There is no deep meaning behind these magic numbers +% used as factors; they just match (closely enough) what Knuth defined. +% +\def\lineskipfactor{.08333} +\def\strutheightpercent{.70833} +\def\strutdepthpercent {.29167} +% +% can get a sort of poor man's double spacing by redefining this. +\def\baselinefactor{1} +% +\def\setleading#1{% + \dimen0 = #1\relax + \normalbaselineskip = \baselinefactor\dimen0 + \normallineskip = \lineskipfactor\normalbaselineskip + \normalbaselines + \setbox\strutbox =\hbox{% + \vrule width0pt height\strutheightpercent\baselineskip + depth \strutdepthpercent \baselineskip + }% +} + +% PDF CMaps. See also LaTeX's t1.cmap. +% +% do nothing with this by default. +\expandafter\let\csname cmapOT1\endcsname\gobble +\expandafter\let\csname cmapOT1IT\endcsname\gobble +\expandafter\let\csname cmapOT1TT\endcsname\gobble + +% if we are producing pdf, and we have \pdffontattr, then define cmaps. +% (\pdffontattr was introduced many years ago, but people still run +% older pdftex's; it's easy to conditionalize, so we do.) +\ifpdf \ifx\pdffontattr\undefined \else + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1-0) +%%Title: (TeX-OT1-0 TeX OT1 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1) +/Supplement 0 +>> def +/CMapName /TeX-OT1-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<23> <26> <0023> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +40 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1IT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1IT-0) +%%Title: (TeX-OT1IT-0 TeX OT1IT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1IT) +/Supplement 0 +>> def +/CMapName /TeX-OT1IT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<25> <26> <0025> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +42 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<23> <0023> +<24> <00A3> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1IT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1TT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1TT-0) +%%Title: (TeX-OT1TT-0 TeX OT1TT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1TT) +/Supplement 0 +>> def +/CMapName /TeX-OT1TT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +5 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<21> <26> <0021> +<28> <5F> <0028> +<61> <7E> <0061> +endbfrange +32 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <2191> +<0C> <2193> +<0D> <0027> +<0E> <00A1> +<0F> <00BF> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<20> <2423> +<27> <2019> +<60> <2018> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1TT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +\fi\fi + + +% Set the font macro #1 to the font named #2, adding on the +% specified font prefix (normally `cm'). +% #3 is the font's design size, #4 is a scale factor, #5 is the CMap +% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass +% empty to omit). +\def\setfont#1#2#3#4#5{% + \font#1=\fontprefix#2#3 scaled #4 + \csname cmap#5\endcsname#1% +} +% This is what gets called when #5 of \setfont is empty. +\let\cmap\gobble +% emacs-page end of cmaps + +% Use cm as the default font prefix. +% To specify the font prefix, you must define \fontprefix +% before you read in texinfo.tex. +\ifx\fontprefix\undefined +\def\fontprefix{cm} +\fi +% Support font families that don't use the same naming scheme as CM. +\def\rmshape{r} +\def\rmbshape{bx} %where the normal face is bold +\def\bfshape{b} +\def\bxshape{bx} +\def\ttshape{tt} +\def\ttbshape{tt} +\def\ttslshape{sltt} +\def\itshape{ti} +\def\itbshape{bxti} +\def\slshape{sl} +\def\slbshape{bxsl} +\def\sfshape{ss} +\def\sfbshape{ss} +\def\scshape{csc} +\def\scbshape{csc} + +% Definitions for a main text size of 11pt. This is the default in +% Texinfo. +% +\def\definetextfontsizexi{% +% Text fonts (11.2pt, magstep1). +\def\textnominalsize{11pt} +\edef\mainmagstep{\magstephalf} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep +\def\textecsize{1095} + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstep1}{OT1} +\setfont\deftt\ttshape{10}{\magstep1}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 +\def\smallecsize{0900} + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 +\def\smallerecsize{0800} + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\titleecsize{2074} + +% Chapter (and unnumbered) fonts (17.28pt). +\def\chapnominalsize{17pt} +\setfont\chaprm\rmbshape{12}{\magstep2}{OT1} +\setfont\chapit\itbshape{10}{\magstep3}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep3}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT} +\setfont\chapsf\sfbshape{17}{1000}{OT1} +\let\chapbf=\chaprm +\setfont\chapsc\scbshape{10}{\magstep3}{OT1} +\font\chapi=cmmi12 scaled \magstep2 +\font\chapsy=cmsy10 scaled \magstep3 +\def\chapecsize{1728} + +% Section fonts (14.4pt). +\def\secnominalsize{14pt} +\setfont\secrm\rmbshape{12}{\magstep1}{OT1} +\setfont\secit\itbshape{10}{\magstep2}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep2}{OT1} +\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\secsf\sfbshape{12}{\magstep1}{OT1} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep2}{OT1} +\font\seci=cmmi12 scaled \magstep1 +\font\secsy=cmsy10 scaled \magstep2 +\def\sececsize{1440} + +% Subsection fonts (13.15pt). +\def\ssecnominalsize{13pt} +\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1} +\setfont\ssecit\itbshape{10}{1315}{OT1IT} +\setfont\ssecsl\slbshape{10}{1315}{OT1} +\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT} +\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1315}{OT1} +\font\sseci=cmmi12 scaled \magstephalf +\font\ssecsy=cmsy10 scaled 1315 +\def\ssececsize{1200} + +% Reduced fonts for @acro in text (10pt). +\def\reducednominalsize{10pt} +\setfont\reducedrm\rmshape{10}{1000}{OT1} +\setfont\reducedtt\ttshape{10}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{1000}{OT1} +\setfont\reducedit\itshape{10}{1000}{OT1IT} +\setfont\reducedsl\slshape{10}{1000}{OT1} +\setfont\reducedsf\sfshape{10}{1000}{OT1} +\setfont\reducedsc\scshape{10}{1000}{OT1} +\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT} +\font\reducedi=cmmi10 +\font\reducedsy=cmsy10 +\def\reducedecsize{1000} + +% reset the current fonts +\textfonts +\rm +} % end of 11pt text font size definitions + + +% Definitions to make the main text be 10pt Computer Modern, with +% section, chapter, etc., sizes following suit. This is for the GNU +% Press printing of the Emacs 22 manual. Maybe other manuals in the +% future. Used with @smallbook, which sets the leading to 12pt. +% +\def\definetextfontsizex{% +% Text fonts (10pt). +\def\textnominalsize{10pt} +\edef\mainmagstep{1000} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep +\def\textecsize{1000} + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstephalf}{OT1} +\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 +\def\smallecsize{0900} + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 +\def\smallerecsize{0800} + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\titleecsize{2074} + +% Chapter fonts (14.4pt). +\def\chapnominalsize{14pt} +\setfont\chaprm\rmbshape{12}{\magstep1}{OT1} +\setfont\chapit\itbshape{10}{\magstep2}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep2}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\chapsf\sfbshape{12}{\magstep1}{OT1} +\let\chapbf\chaprm +\setfont\chapsc\scbshape{10}{\magstep2}{OT1} +\font\chapi=cmmi12 scaled \magstep1 +\font\chapsy=cmsy10 scaled \magstep2 +\def\chapecsize{1440} + +% Section fonts (12pt). +\def\secnominalsize{12pt} +\setfont\secrm\rmbshape{12}{1000}{OT1} +\setfont\secit\itbshape{10}{\magstep1}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep1}{OT1} +\setfont\sectt\ttbshape{12}{1000}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT} +\setfont\secsf\sfbshape{12}{1000}{OT1} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep1}{OT1} +\font\seci=cmmi12 +\font\secsy=cmsy10 scaled \magstep1 +\def\sececsize{1200} + +% Subsection fonts (10pt). +\def\ssecnominalsize{10pt} +\setfont\ssecrm\rmbshape{10}{1000}{OT1} +\setfont\ssecit\itbshape{10}{1000}{OT1IT} +\setfont\ssecsl\slbshape{10}{1000}{OT1} +\setfont\ssectt\ttbshape{10}{1000}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT} +\setfont\ssecsf\sfbshape{10}{1000}{OT1} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1000}{OT1} +\font\sseci=cmmi10 +\font\ssecsy=cmsy10 +\def\ssececsize{1000} + +% Reduced fonts for @acro in text (9pt). +\def\reducednominalsize{9pt} +\setfont\reducedrm\rmshape{9}{1000}{OT1} +\setfont\reducedtt\ttshape{9}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{900}{OT1} +\setfont\reducedit\itshape{9}{1000}{OT1IT} +\setfont\reducedsl\slshape{9}{1000}{OT1} +\setfont\reducedsf\sfshape{9}{1000}{OT1} +\setfont\reducedsc\scshape{10}{900}{OT1} +\setfont\reducedttsl\ttslshape{10}{900}{OT1TT} +\font\reducedi=cmmi9 +\font\reducedsy=cmsy9 +\def\reducedecsize{0900} + +% reduce space between paragraphs +\divide\parskip by 2 + +% reset the current fonts +\textfonts +\rm +} % end of 10pt text font size definitions + + +% We provide the user-level command +% @fonttextsize 10 +% (or 11) to redefine the text font size. pt is assumed. +% +\def\xword{10} +\def\xiword{11} +% +\parseargdef\fonttextsize{% + \def\textsizearg{#1}% + \wlog{doing @fonttextsize \textsizearg}% + % + % Set \globaldefs so that documents can use this inside @tex, since + % makeinfo 4.8 does not support it, but we need it nonetheless. + % + \begingroup \globaldefs=1 + \ifx\textsizearg\xword \definetextfontsizex + \else \ifx\textsizearg\xiword \definetextfontsizexi + \else + \errhelp=\EMsimple + \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'} + \fi\fi + \endgroup +} + + +% In order for the font changes to affect most math symbols and letters, +% we have to define the \textfont of the standard families. Since +% texinfo doesn't allow for producing subscripts and superscripts except +% in the main text, we don't bother to reset \scriptfont and +% \scriptscriptfont (which would also require loading a lot more fonts). +% +\def\resetmathfonts{% + \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy + \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf + \textfont\ttfam=\tentt \textfont\sffam=\tensf +} + +% The font-changing commands redefine the meanings of \tenSTYLE, instead +% of just \STYLE. We do this because \STYLE needs to also set the +% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire +% \tenSTYLE to set the current font. +% +% Each font-changing command also sets the names \lsize (one size lower) +% and \lllsize (three sizes lower). These relative commands are used in +% the LaTeX logo and acronyms. +% +% This all needs generalizing, badly. +% +\def\textfonts{% + \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl + \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc + \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy + \let\tenttsl=\textttsl + \def\curfontsize{text}% + \def\lsize{reduced}\def\lllsize{smaller}% + \resetmathfonts \setleading{\textleading}} +\def\titlefonts{% + \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl + \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc + \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy + \let\tenttsl=\titlettsl + \def\curfontsize{title}% + \def\lsize{chap}\def\lllsize{subsec}% + \resetmathfonts \setleading{25pt}} +\def\titlefont#1{{\titlefonts\rmisbold #1}} +\def\chapfonts{% + \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl + \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy + \let\tenttsl=\chapttsl + \def\curfontsize{chap}% + \def\lsize{sec}\def\lllsize{text}% + \resetmathfonts \setleading{19pt}} +\def\secfonts{% + \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl + \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc + \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy + \let\tenttsl=\secttsl + \def\curfontsize{sec}% + \def\lsize{subsec}\def\lllsize{reduced}% + \resetmathfonts \setleading{16pt}} +\def\subsecfonts{% + \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl + \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc + \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy + \let\tenttsl=\ssecttsl + \def\curfontsize{ssec}% + \def\lsize{text}\def\lllsize{small}% + \resetmathfonts \setleading{15pt}} +\let\subsubsecfonts = \subsecfonts +\def\reducedfonts{% + \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl + \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc + \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy + \let\tenttsl=\reducedttsl + \def\curfontsize{reduced}% + \def\lsize{small}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallfonts{% + \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl + \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc + \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy + \let\tenttsl=\smallttsl + \def\curfontsize{small}% + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallerfonts{% + \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl + \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc + \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy + \let\tenttsl=\smallerttsl + \def\curfontsize{smaller}% + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{9.5pt}} + +% Fonts for short table of contents. +\setfont\shortcontrm\rmshape{12}{1000}{OT1} +\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 +\setfont\shortcontsl\slshape{12}{1000}{OT1} +\setfont\shortconttt\ttshape{12}{1000}{OT1TT} + +% Define these just so they can be easily changed for other fonts. +\def\angleleft{$\langle$} +\def\angleright{$\rangle$} + +% Set the fonts to use with the @small... environments. +\let\smallexamplefonts = \smallfonts + +% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample +% can fit this many characters: +% 8.5x11=86 smallbook=72 a4=90 a5=69 +% If we use \scriptfonts (8pt), then we can fit this many characters: +% 8.5x11=90+ smallbook=80 a4=90+ a5=77 +% For me, subjectively, the few extra characters that fit aren't worth +% the additional smallness of 8pt. So I'm making the default 9pt. +% +% By the way, for comparison, here's what fits with @example (10pt): +% 8.5x11=71 smallbook=60 a4=75 a5=58 +% --karl, 24jan03. + +% Set up the default fonts, so we can use them for creating boxes. +% +\definetextfontsizexi + + +\message{markup,} + +% Check if we are currently using a typewriter font. Since all the +% Computer Modern typewriter fonts have zero interword stretch (and +% shrink), and it is reasonable to expect all typewriter fonts to have +% this property, we can check that font parameter. +% +\def\ifmonospace{\ifdim\fontdimen3\font=0pt } + +% Markup style infrastructure. \defmarkupstylesetup\INITMACRO will +% define and register \INITMACRO to be called on markup style changes. +% \INITMACRO can check \currentmarkupstyle for the innermost +% style and the set of \ifmarkupSTYLE switches for all styles +% currently in effect. +\newif\ifmarkupvar +\newif\ifmarkupsamp +\newif\ifmarkupkey +%\newif\ifmarkupfile % @file == @samp. +%\newif\ifmarkupoption % @option == @samp. +\newif\ifmarkupcode +\newif\ifmarkupkbd +%\newif\ifmarkupenv % @env == @code. +%\newif\ifmarkupcommand % @command == @code. +\newif\ifmarkuptex % @tex (and part of @math, for now). +\newif\ifmarkupexample +\newif\ifmarkupverb +\newif\ifmarkupverbatim + +\let\currentmarkupstyle\empty + +\def\setupmarkupstyle#1{% + \csname markup#1true\endcsname + \def\currentmarkupstyle{#1}% + \markupstylesetup +} + +\let\markupstylesetup\empty + +\def\defmarkupstylesetup#1{% + \expandafter\def\expandafter\markupstylesetup + \expandafter{\markupstylesetup #1}% + \def#1% +} + +% Markup style setup for left and right quotes. +\defmarkupstylesetup\markupsetuplq{% + \expandafter\let\expandafter \temp \csname markupsetuplq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuplqdefault \else \temp \fi +} + +\defmarkupstylesetup\markupsetuprq{% + \expandafter\let\expandafter \temp \csname markupsetuprq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuprqdefault \else \temp \fi +} + +{ +\catcode`\'=\active +\catcode`\`=\active + +\gdef\markupsetuplqdefault{\let`\lq} +\gdef\markupsetuprqdefault{\let'\rq} + +\gdef\markupsetcodequoteleft{\let`\codequoteleft} +\gdef\markupsetcodequoteright{\let'\codequoteright} + +\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft} +} + +\let\markupsetuplqcode \markupsetcodequoteleft +\let\markupsetuprqcode \markupsetcodequoteright +\let\markupsetuplqexample \markupsetcodequoteleft +\let\markupsetuprqexample \markupsetcodequoteright +\let\markupsetuplqverb \markupsetcodequoteleft +\let\markupsetuprqverb \markupsetcodequoteright +\let\markupsetuplqverbatim \markupsetcodequoteleft +\let\markupsetuprqverbatim \markupsetcodequoteright + +\let\markupsetuplqsamp \markupsetnoligaturesquoteleft +\let\markupsetuplqkbd \markupsetnoligaturesquoteleft + +% Allow an option to not replace quotes with a regular directed right +% quote/apostrophe (char 0x27), but instead use the undirected quote +% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it +% the default, but it works for pasting with more pdf viewers (at least +% evince), the lilypond developers report. xpdf does work with the +% regular 0x27. +% +\def\codequoteright{% + \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax + \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax + '% + \else \char'15 \fi + \else \char'15 \fi +} +% +% and a similar option for the left quote char vs. a grave accent. +% Modern fonts display ASCII 0x60 as a grave accent, so some people like +% the code environments to do likewise. +% +\def\codequoteleft{% + \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax + \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax + % [Knuth] pp. 380,381,391 + % \relax disables Spanish ligatures ?` and !` of \tt font. + \relax`% + \else \char'22 \fi + \else \char'22 \fi +} + +% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font. +\def\noligaturesquoteleft{\relax\lq} + +% Count depth in font-changes, for error checks +\newcount\fontdepth \fontdepth=0 + +%% Add scribe-like font environments, plus @l for inline lisp (usually sans +%% serif) and @ii for TeX italic + +% \smartitalic{ARG} outputs arg in italics, followed by an italic correction +% unless the following character is such as not to need one. +\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else + \ptexslash\fi\fi\fi} +\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx} +\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx} + +% like \smartslanted except unconditionally uses \ttsl. +% @var is set to this for defun arguments. +\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} + +% @cite is like \smartslanted except unconditionally use \sl. We never want +% ttsl for book titles, do we? +\def\cite#1{{\sl #1}\futurelet\next\smartitalicx} + +\let\i=\smartitalic +\let\slanted=\smartslanted +\def\var#1{{\setupmarkupstyle{var}\smartslanted{#1}}} +\let\dfn=\smartslanted +\let\emph=\smartitalic + +% Explicit font changes: @r, @sc, undocumented @ii. +\def\r#1{{\rm #1}} % roman font +\def\sc#1{{\smallcaps#1}} % smallcaps font +\def\ii#1{{\it #1}} % italic font + +% @b, explicit bold. Also @strong. +\def\b#1{{\bf #1}} +\let\strong=\b + +% @sansserif, explicit sans. +\def\sansserif#1{{\sf #1}} + +% We can't just use \exhyphenpenalty, because that only has effect at +% the end of a paragraph. Restore normal hyphenation at the end of the +% group within which \nohyphenation is presumably called. +% +\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} +\def\restorehyphenation{\hyphenchar\font = `- } + +% Set sfcode to normal for the chars that usually have another value. +% Can't use plain's \frenchspacing because it uses the `\x notation, and +% sometimes \x has an active definition that messes things up. +% +\catcode`@=11 + \def\plainfrenchspacing{% + \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m + \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m + \def\endofsentencespacefactor{1000}% for @. and friends + } + \def\plainnonfrenchspacing{% + \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000 + \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250 + \def\endofsentencespacefactor{3000}% for @. and friends + } +\catcode`@=\other +\def\endofsentencespacefactor{3000}% default + +% @t, explicit typewriter. +\def\t#1{% + {\tt \rawbackslash \plainfrenchspacing #1}% + \null +} + +% @samp. +\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} + +% definition of @key that produces a lozenge. Doesn't adjust to text size. +%\setfont\keyrm\rmshape{8}{1000}{OT1} +%\font\keysy=cmsy9 +%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% +% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% +% \vbox{\hrule\kern-0.4pt +% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% +% \kern-0.4pt\hrule}% +% \kern-.06em\raise0.4pt\hbox{\angleright}}}} + +% definition of @key with no lozenge. If the current font is already +% monospace, don't change it; that way, we respect @kbdinputstyle. But +% if it isn't monospace, then use \tt. +% +\def\key#1{{\setupmarkupstyle{key}% + \nohyphenation + \ifmonospace\else\tt\fi + #1}\null} + +% ctrl is no longer a Texinfo command. +\def\ctrl #1{{\tt \rawbackslash \hat}#1} + +% @file, @option are the same as @samp. +\let\file=\samp +\let\option=\samp + +% @code is a modification of @t, +% which makes spaces the same size as normal in the surrounding text. +\def\tclose#1{% + {% + % Change normal interword space to be same as for the current font. + \spaceskip = \fontdimen2\font + % + % Switch to typewriter. + \tt + % + % But `\ ' produces the large typewriter interword space. + \def\ {{\spaceskip = 0pt{} }}% + % + % Turn off hyphenation. + \nohyphenation + % + \rawbackslash + \plainfrenchspacing + #1% + }% + \null +} + +% We *must* turn on hyphenation at `-' and `_' in @code. +% Otherwise, it is too hard to avoid overfull hboxes +% in the Emacs manual, the Library manual, etc. + +% Unfortunately, TeX uses one parameter (\hyphenchar) to control +% both hyphenation at - and hyphenation within words. +% We must therefore turn them both off (\tclose does that) +% and arrange explicitly to hyphenate at a dash. +% -- rms. +{ + \catcode`\-=\active \catcode`\_=\active + \catcode`\'=\active \catcode`\`=\active + \global\let'=\rq \global\let`=\lq % default definitions + % + \global\def\code{\begingroup + \setupmarkupstyle{code}% + % The following should really be moved into \setupmarkupstyle handlers. + \catcode\dashChar=\active \catcode\underChar=\active + \ifallowcodebreaks + \let-\codedash + \let_\codeunder + \else + \let-\realdash + \let_\realunder + \fi + \codex + } +} + +\def\realdash{-} +\def\codedash{-\discretionary{}{}{}} +\def\codeunder{% + % this is all so @math{@code{var_name}+1} can work. In math mode, _ + % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) + % will therefore expand the active definition of _, which is us + % (inside @code that is), therefore an endless loop. + \ifusingtt{\ifmmode + \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_. + \else\normalunderscore \fi + \discretionary{}{}{}}% + {\_}% +} +\def\codex #1{\tclose{#1}\endgroup} + +% An additional complication: the above will allow breaks after, e.g., +% each of the four underscores in __typeof__. This is undesirable in +% some manuals, especially if they don't have long identifiers in +% general. @allowcodebreaks provides a way to control this. +% +\newif\ifallowcodebreaks \allowcodebreakstrue + +\def\keywordtrue{true} +\def\keywordfalse{false} + +\parseargdef\allowcodebreaks{% + \def\txiarg{#1}% + \ifx\txiarg\keywordtrue + \allowcodebreakstrue + \else\ifx\txiarg\keywordfalse + \allowcodebreaksfalse + \else + \errhelp = \EMsimple + \errmessage{Unknown @allowcodebreaks option `\txiarg'}% + \fi\fi +} + +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. +\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}} + +% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), +% `example' (@kbd uses ttsl only inside of @example and friends), +% or `code' (@kbd uses normal tty font always). +\parseargdef\kbdinputstyle{% + \def\txiarg{#1}% + \ifx\txiarg\worddistinct + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% + \else\ifx\txiarg\wordexample + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% + \else\ifx\txiarg\wordcode + \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% + \else + \errhelp = \EMsimple + \errmessage{Unknown @kbdinputstyle option `\txiarg'}% + \fi\fi\fi +} +\def\worddistinct{distinct} +\def\wordexample{example} +\def\wordcode{code} + +% Default is `distinct'. +\kbdinputstyle distinct + +\def\xkey{\key} +\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% +\ifx\one\xkey\ifx\threex\three \key{#2}% +\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi} + +% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. +\let\indicateurl=\code +\let\env=\code +\let\command=\code + +% @clicksequence{File @click{} Open ...} +\def\clicksequence#1{\begingroup #1\endgroup} + +% @clickstyle @arrow (by default) +\parseargdef\clickstyle{\def\click{#1}} +\def\click{\arrow} + +% @uref (abbreviation for `urlref') takes an optional (comma-separated) +% second argument specifying the text to display and an optional third +% arg as text to display instead of (rather than in addition to) the url +% itself. First (mandatory) arg is the url. Perhaps eventually put in +% a hypertex \special here. +% +\def\uref#1{\douref #1,,,\finish} +\def\douref#1,#2,#3,#4\finish{\begingroup + \unsepspaces + \pdfurl{#1}% + \setbox0 = \hbox{\ignorespaces #3}% + \ifdim\wd0 > 0pt + \unhbox0 % third arg given, show only that + \else + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \ifpdf + \unhbox0 % PDF: 2nd arg given, show only it + \else + \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url + \fi + \else + \code{#1}% only url given, so show it + \fi + \fi + \endlink +\endgroup} + +% @url synonym for @uref, since that's how everyone uses it. +% +\let\url=\uref + +% rms does not like angle brackets --karl, 17may97. +% So now @email is just like @uref, unless we are pdf. +% +%\def\email#1{\angleleft{\tt #1}\angleright} +\ifpdf + \def\email#1{\doemail#1,,\finish} + \def\doemail#1,#2,#3\finish{\begingroup + \unsepspaces + \pdfurl{mailto:#1}% + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi + \endlink + \endgroup} +\else + \let\email=\uref +\fi + +% Typeset a dimension, e.g., `in' or `pt'. The only reason for the +% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. +% +\def\dmn#1{\thinspace #1} + +% @l was never documented to mean ``switch to the Lisp font'', +% and it is not used as such in any manual I can find. We need it for +% Polish suppressed-l. --karl, 22sep96. +%\def\l#1{{\li #1}\null} + +% @acronym for "FBI", "NATO", and the like. +% We print this one point size smaller, since it's intended for +% all-uppercase. +% +\def\acronym#1{\doacronym #1,,\finish} +\def\doacronym#1,#2,#3\finish{% + {\selectfonts\lsize #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi +} + +% @abbr for "Comput. J." and the like. +% No font change, but don't do end-of-sentence spacing. +% +\def\abbr#1{\doabbr #1,,\finish} +\def\doabbr#1,#2,#3\finish{% + {\plainfrenchspacing #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi +} + + +\message{glyphs,} + +% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% +% Since these characters are used in examples, they should be an even number of +% \tt widths. Each \tt character is 1en, so two makes it 1em. +% +\def\point{$\star$} +\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}} +\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} +\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}} +\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} +\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}} + +% The @error{} command. +% Adapted from the TeXbook's \boxit. +% +\newbox\errorbox +% +{\tentt \global\dimen0 = 3em}% Width of the box. +\dimen2 = .55pt % Thickness of rules +% The text. (`r' is open on the right, `e' somewhat less so on the left.) +\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt} +% +\setbox\errorbox=\hbox to \dimen0{\hfil + \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. + \advance\hsize by -2\dimen2 % Rules. + \vbox{% + \hrule height\dimen2 + \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. + \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. + \kern3pt\vrule width\dimen2}% Space to right. + \hrule height\dimen2} + \hfil} +% +\def\error{\leavevmode\lower.7ex\copy\errorbox} + +% @pounds{} is a sterling sign, which Knuth put in the CM italic font. +% +\def\pounds{{\it\$}} + +% @euro{} comes from a separate font, depending on the current style. +% We use the free feym* fonts from the eurosym package by Henrik +% Theiling, which support regular, slanted, bold and bold slanted (and +% "outlined" (blackboard board, sort of) versions, which we don't need). +% It is available from http://www.ctan.org/tex-archive/fonts/eurosym. +% +% Although only regular is the truly official Euro symbol, we ignore +% that. The Euro is designed to be slightly taller than the regular +% font height. +% +% feymr - regular +% feymo - slanted +% feybr - bold +% feybo - bold slanted +% +% There is no good (free) typewriter version, to my knowledge. +% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. +% Hmm. +% +% Also doesn't work in math. Do we need to do math with euro symbols? +% Hope not. +% +% +\def\euro{{\eurofont e}} +\def\eurofont{% + % We set the font at each command, rather than predefining it in + % \textfonts and the other font-switching commands, so that + % installations which never need the symbol don't have to have the + % font installed. + % + % There is only one designed size (nominal 10pt), so we always scale + % that to the current nominal size. + % + % By the way, simply using "at 1em" works for cmr10 and the like, but + % does not work for cmbx10 and other extended/shrunken fonts. + % + \def\eurosize{\csname\curfontsize nominalsize\endcsname}% + % + \ifx\curfontstyle\bfstylename + % bold: + \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize + \else + % regular: + \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize + \fi + \thiseurofont +} + +% Glyphs from the EC fonts. We don't use \let for the aliases, because +% sometimes we redefine the original macro, and the alias should reflect +% the redefinition. +% +% Use LaTeX names for the Icelandic letters. +\def\DH{{\ecfont \char"D0}} % Eth +\def\dh{{\ecfont \char"F0}} % eth +\def\TH{{\ecfont \char"DE}} % Thorn +\def\th{{\ecfont \char"FE}} % thorn +% +\def\guillemetleft{{\ecfont \char"13}} +\def\guillemotleft{\guillemetleft} +\def\guillemetright{{\ecfont \char"14}} +\def\guillemotright{\guillemetright} +\def\guilsinglleft{{\ecfont \char"0E}} +\def\guilsinglright{{\ecfont \char"0F}} +\def\quotedblbase{{\ecfont \char"12}} +\def\quotesinglbase{{\ecfont \char"0D}} +% +% This positioning is not perfect (see the ogonek LaTeX package), but +% we have the precomposed glyphs for the most common cases. We put the +% tests to use those glyphs in the single \ogonek macro so we have fewer +% dummy definitions to worry about for index entries, etc. +% +% ogonek is also used with other letters in Lithuanian (IOU), but using +% the precomposed glyphs for those is not so easy since they aren't in +% the same EC font. +\def\ogonek#1{{% + \def\temp{#1}% + \ifx\temp\macrocharA\Aogonek + \else\ifx\temp\macrochara\aogonek + \else\ifx\temp\macrocharE\Eogonek + \else\ifx\temp\macrochare\eogonek + \else + \ecfont \setbox0=\hbox{#1}% + \ifdim\ht0=1ex\accent"0C #1% + \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}% + \fi + \fi\fi\fi\fi + }% +} +\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A} +\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a} +\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E} +\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e} +% +% Use the ec* fonts (cm-super in outline format) for non-CM glyphs. +\def\ecfont{% + % We can't distinguish serif/sans and italic/slanted, but this + % is used for crude hacks anyway (like adding French and German + % quotes to documents typeset with CM, where we lose kerning), so + % hopefully nobody will notice/care. + \edef\ecsize{\csname\curfontsize ecsize\endcsname}% + \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}% + \ifx\curfontstyle\bfstylename + % bold: + \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \else + % regular: + \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \fi + \thisecfont +} + +% @registeredsymbol - R in a circle. The font for the R should really +% be smaller yet, but lllsize is the best we can do for now. +% Adapted from the plain.tex definition of \copyright. +% +\def\registeredsymbol{% + $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}% + \hfil\crcr\Orb}}% + }$% +} + +% @textdegree - the normal degrees sign. +% +\def\textdegree{$^\circ$} + +% Laurent Siebenmann reports \Orb undefined with: +% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 +% so we'll define it if necessary. +% +\ifx\Orb\undefined +\def\Orb{\mathhexbox20D} +\fi + +% Quotes. +\chardef\quotedblleft="5C +\chardef\quotedblright=`\" +\chardef\quoteleft=`\` +\chardef\quoteright=`\' + + +\message{page headings,} + +\newskip\titlepagetopglue \titlepagetopglue = 1.5in +\newskip\titlepagebottomglue \titlepagebottomglue = 2pc + +% First the title page. Must do @settitle before @titlepage. +\newif\ifseenauthor +\newif\iffinishedtitlepage + +% Do an implicit @contents or @shortcontents after @end titlepage if the +% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage. +% +\newif\ifsetcontentsaftertitlepage + \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue +\newif\ifsetshortcontentsaftertitlepage + \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue + +\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% + \endgroup\page\hbox{}\page} + +\envdef\titlepage{% + % Open one extra group, as we want to close it in the middle of \Etitlepage. + \begingroup + \parindent=0pt \textfonts + % Leave some space at the very top of the page. + \vglue\titlepagetopglue + % No rule at page bottom unless we print one at the top with @title. + \finishedtitlepagetrue + % + % Most title ``pages'' are actually two pages long, with space + % at the top of the second. We don't want the ragged left on the second. + \let\oldpage = \page + \def\page{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + \let\page = \oldpage + \page + \null + }% +} + +\def\Etitlepage{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + % It is important to do the page break before ending the group, + % because the headline and footline are only empty inside the group. + % If we use the new definition of \page, we always get a blank page + % after the title page, which we certainly don't want. + \oldpage + \endgroup + % + % Need this before the \...aftertitlepage checks so that if they are + % in effect the toc pages will come out with page numbers. + \HEADINGSon + % + % If they want short, they certainly want long too. + \ifsetshortcontentsaftertitlepage + \shortcontents + \contents + \global\let\shortcontents = \relax + \global\let\contents = \relax + \fi + % + \ifsetcontentsaftertitlepage + \contents + \global\let\contents = \relax + \global\let\shortcontents = \relax + \fi +} + +\def\finishtitlepage{% + \vskip4pt \hrule height 2pt width \hsize + \vskip\titlepagebottomglue + \finishedtitlepagetrue +} + +%%% Macros to be used within @titlepage: + +\let\subtitlerm=\tenrm +\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} + +\parseargdef\title{% + \checkenv\titlepage + \leftline{\titlefonts\rmisbold #1} + % print a rule at the page bottom also. + \finishedtitlepagefalse + \vskip4pt \hrule height 4pt width \hsize \vskip4pt +} + +\parseargdef\subtitle{% + \checkenv\titlepage + {\subtitlefont \rightline{#1}}% +} + +% @author should come last, but may come many times. +% It can also be used inside @quotation. +% +\parseargdef\author{% + \def\temp{\quotation}% + \ifx\thisenv\temp + \def\quotationauthor{#1}% printed in \Equotation. + \else + \checkenv\titlepage + \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi + {\secfonts\rmisbold \leftline{#1}}% + \fi +} + + +%%% Set up page headings and footings. + +\let\thispage=\folio + +\newtoks\evenheadline % headline on even pages +\newtoks\oddheadline % headline on odd pages +\newtoks\evenfootline % footline on even pages +\newtoks\oddfootline % footline on odd pages + +% Now make TeX use those variables +\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline + \else \the\evenheadline \fi}} +\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline + \else \the\evenfootline \fi}\HEADINGShook} +\let\HEADINGShook=\relax + +% Commands to set those variables. +% For example, this is what @headings on does +% @evenheading @thistitle|@thispage|@thischapter +% @oddheading @thischapter|@thispage|@thistitle +% @evenfooting @thisfile|| +% @oddfooting ||@thisfile + + +\def\evenheading{\parsearg\evenheadingxxx} +\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} +\def\evenheadingyyy #1\|#2\|#3\|#4\finish{% +\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\def\oddheading{\parsearg\oddheadingxxx} +\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} +\def\oddheadingyyy #1\|#2\|#3\|#4\finish{% +\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% + +\def\evenfooting{\parsearg\evenfootingxxx} +\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish} +\def\evenfootingyyy #1\|#2\|#3\|#4\finish{% +\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\def\oddfooting{\parsearg\oddfootingxxx} +\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish} +\def\oddfootingyyy #1\|#2\|#3\|#4\finish{% + \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% + % + % Leave some space for the footline. Hopefully ok to assume + % @evenfooting will not be used by itself. + \global\advance\pageheight by -12pt + \global\advance\vsize by -12pt +} + +\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} + +% @evenheadingmarks top \thischapter <- chapter at the top of a page +% @evenheadingmarks bottom \thischapter <- chapter at the bottom of a page +% +% The same set of arguments for: +% +% @oddheadingmarks +% @evenfootingmarks +% @oddfootingmarks +% @everyheadingmarks +% @everyfootingmarks + +\def\evenheadingmarks{\headingmarks{even}{heading}} +\def\oddheadingmarks{\headingmarks{odd}{heading}} +\def\evenfootingmarks{\headingmarks{even}{footing}} +\def\oddfootingmarks{\headingmarks{odd}{footing}} +\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1} + \headingmarks{odd}{heading}{#1} } +\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1} + \headingmarks{odd}{footing}{#1} } +% #1 = even/odd, #2 = heading/footing, #3 = top/bottom. +\def\headingmarks#1#2#3 {% + \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname + \global\expandafter\let\csname get#1#2marks\endcsname \temp +} + +\everyheadingmarks bottom +\everyfootingmarks bottom + +% @headings double turns headings on for double-sided printing. +% @headings single turns headings on for single-sided printing. +% @headings off turns them off. +% @headings on same as @headings double, retained for compatibility. +% @headings after turns on double-sided headings after this page. +% @headings doubleafter turns on double-sided headings after this page. +% @headings singleafter turns on single-sided headings after this page. +% By default, they are off at the start of a document, +% and turned `on' after @end titlepage. + +\def\headings #1 {\csname HEADINGS#1\endcsname} + +\def\HEADINGSoff{% +\global\evenheadline={\hfil} \global\evenfootline={\hfil} +\global\oddheadline={\hfil} \global\oddfootline={\hfil}} +\HEADINGSoff +% When we turn headings on, set the page number to 1. +% For double-sided printing, put current file name in lower left corner, +% chapter name on inside top of right hand pages, document +% title on inside top of left hand pages, and page numbers on outside top +% edge of all pages. +\def\HEADINGSdouble{% +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chapoddpage +} +\let\contentsalignmacro = \chappager + +% For single-sided printing, chapter title goes across top left of page, +% page number on top right. +\def\HEADINGSsingle{% +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chappager +} +\def\HEADINGSon{\HEADINGSdouble} + +\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} +\let\HEADINGSdoubleafter=\HEADINGSafter +\def\HEADINGSdoublex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chapoddpage +} + +\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} +\def\HEADINGSsinglex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chappager +} + +% Subroutines used in generating headings +% This produces Day Month Year style of output. +% Only define if not already defined, in case a txi-??.tex file has set +% up a different format (e.g., txi-cs.tex does this). +\ifx\today\undefined +\def\today{% + \number\day\space + \ifcase\month + \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr + \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug + \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec + \fi + \space\number\year} +\fi + +% @settitle line... specifies the title of the document, for headings. +% It generates no output of its own. +\def\thistitle{\putwordNoTitle} +\def\settitle{\parsearg{\gdef\thistitle}} + + +\message{tables,} +% Tables -- @table, @ftable, @vtable, @item(x). + +% default indentation of table text +\newdimen\tableindent \tableindent=.8in +% default indentation of @itemize and @enumerate text +\newdimen\itemindent \itemindent=.3in +% margin between end of table item and start of table text. +\newdimen\itemmargin \itemmargin=.1in + +% used internally for \itemindent minus \itemmargin +\newdimen\itemmax + +% Note @table, @ftable, and @vtable define @item, @itemx, etc., with +% these defs. +% They also define \itemindex +% to index the item name in whatever manner is desired (perhaps none). + +\newif\ifitemxneedsnegativevskip + +\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi} + +\def\internalBitem{\smallbreak \parsearg\itemzzz} +\def\internalBitemx{\itemxpar \parsearg\itemzzz} + +\def\itemzzz #1{\begingroup % + \advance\hsize by -\rightskip + \advance\hsize by -\tableindent + \setbox0=\hbox{\itemindicate{#1}}% + \itemindex{#1}% + \nobreak % This prevents a break before @itemx. + % + % If the item text does not fit in the space we have, put it on a line + % by itself, and do not allow a page break either before or after that + % line. We do not start a paragraph here because then if the next + % command is, e.g., @kindex, the whatsit would get put into the + % horizontal list on a line by itself, resulting in extra blank space. + \ifdim \wd0>\itemmax + % + % Make this a paragraph so we get the \parskip glue and wrapping, + % but leave it ragged-right. + \begingroup + \advance\leftskip by-\tableindent + \advance\hsize by\tableindent + \advance\rightskip by0pt plus1fil + \leavevmode\unhbox0\par + \endgroup + % + % We're going to be starting a paragraph, but we don't want the + % \parskip glue -- logically it's part of the @item we just started. + \nobreak \vskip-\parskip + % + % Stop a page break at the \parskip glue coming up. However, if + % what follows is an environment such as @example, there will be no + % \parskip glue; then the negative vskip we just inserted would + % cause the example and the item to crash together. So we use this + % bizarre value of 10001 as a signal to \aboveenvbreak to insert + % \parskip glue after all. Section titles are handled this way also. + % + \penalty 10001 + \endgroup + \itemxneedsnegativevskipfalse + \else + % The item text fits into the space. Start a paragraph, so that the + % following text (if any) will end up on the same line. + \noindent + % Do this with kerns and \unhbox so that if there is a footnote in + % the item text, it can migrate to the main vertical list and + % eventually be printed. + \nobreak\kern-\tableindent + \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 + \unhbox0 + \nobreak\kern\dimen0 + \endgroup + \itemxneedsnegativevskiptrue + \fi +} + +\def\item{\errmessage{@item while not in a list environment}} +\def\itemx{\errmessage{@itemx while not in a list environment}} + +% @table, @ftable, @vtable. +\envdef\table{% + \let\itemindex\gobble + \tablecheck{table}% +} +\envdef\ftable{% + \def\itemindex ##1{\doind {fn}{\code{##1}}}% + \tablecheck{ftable}% +} +\envdef\vtable{% + \def\itemindex ##1{\doind {vr}{\code{##1}}}% + \tablecheck{vtable}% +} +\def\tablecheck#1{% + \ifnum \the\catcode`\^^M=\active + \endgroup + \errmessage{This command won't work in this context; perhaps the problem is + that we are \inenvironment\thisenv}% + \def\next{\doignore{#1}}% + \else + \let\next\tablex + \fi + \next +} +\def\tablex#1{% + \def\itemindicate{#1}% + \parsearg\tabley +} +\def\tabley#1{% + {% + \makevalueexpandable + \edef\temp{\noexpand\tablez #1\space\space\space}% + \expandafter + }\temp \endtablez +} +\def\tablez #1 #2 #3 #4\endtablez{% + \aboveenvbreak + \ifnum 0#1>0 \advance \leftskip by #1\mil \fi + \ifnum 0#2>0 \tableindent=#2\mil \fi + \ifnum 0#3>0 \advance \rightskip by #3\mil \fi + \itemmax=\tableindent + \advance \itemmax by -\itemmargin + \advance \leftskip by \tableindent + \exdentamount=\tableindent + \parindent = 0pt + \parskip = \smallskipamount + \ifdim \parskip=0pt \parskip=2pt \fi + \let\item = \internalBitem + \let\itemx = \internalBitemx +} +\def\Etable{\endgraf\afterenvbreak} +\let\Eftable\Etable +\let\Evtable\Etable +\let\Eitemize\Etable +\let\Eenumerate\Etable + +% This is the counter used by @enumerate, which is really @itemize + +\newcount \itemno + +\envdef\itemize{\parsearg\doitemize} + +\def\doitemize#1{% + \aboveenvbreak + \itemmax=\itemindent + \advance\itemmax by -\itemmargin + \advance\leftskip by \itemindent + \exdentamount=\itemindent + \parindent=0pt + \parskip=\smallskipamount + \ifdim\parskip=0pt \parskip=2pt \fi + % + % Try typesetting the item mark that if the document erroneously says + % something like @itemize @samp (intending @table), there's an error + % right away at the @itemize. It's not the best error message in the + % world, but it's better than leaving it to the @item. This means if + % the user wants an empty mark, they have to say @w{} not just @w. + \def\itemcontents{#1}% + \setbox0 = \hbox{\itemcontents}% + % + % @itemize with no arg is equivalent to @itemize @bullet. + \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi + % + \let\item=\itemizeitem +} + +% Definition of @item while inside @itemize and @enumerate. +% +\def\itemizeitem{% + \advance\itemno by 1 % for enumerations + {\let\par=\endgraf \smallbreak}% reasonable place to break + {% + % If the document has an @itemize directly after a section title, a + % \nobreak will be last on the list, and \sectionheading will have + % done a \vskip-\parskip. In that case, we don't want to zero + % parskip, or the item text will crash with the heading. On the + % other hand, when there is normal text preceding the item (as there + % usually is), we do want to zero parskip, or there would be too much + % space. In that case, we won't have a \nobreak before. At least + % that's the theory. + \ifnum\lastpenalty<10000 \parskip=0in \fi + \noindent + \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% + % + \vadjust{\penalty 1200}}% not good to break after first line of item. + \flushcr +} + +% \splitoff TOKENS\endmark defines \first to be the first token in +% TOKENS, and \rest to be the remainder. +% +\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% + +% Allow an optional argument of an uppercase letter, lowercase letter, +% or number, to specify the first label in the enumerated list. No +% argument is the same as `1'. +% +\envparseargdef\enumerate{\enumeratey #1 \endenumeratey} +\def\enumeratey #1 #2\endenumeratey{% + % If we were given no argument, pretend we were given `1'. + \def\thearg{#1}% + \ifx\thearg\empty \def\thearg{1}\fi + % + % Detect if the argument is a single token. If so, it might be a + % letter. Otherwise, the only valid thing it can be is a number. + % (We will always have one token, because of the test we just made. + % This is a good thing, since \splitoff doesn't work given nothing at + % all -- the first parameter is undelimited.) + \expandafter\splitoff\thearg\endmark + \ifx\rest\empty + % Only one token in the argument. It could still be anything. + % A ``lowercase letter'' is one whose \lccode is nonzero. + % An ``uppercase letter'' is one whose \lccode is both nonzero, and + % not equal to itself. + % Otherwise, we assume it's a number. + % + % We need the \relax at the end of the \ifnum lines to stop TeX from + % continuing to look for a . + % + \ifnum\lccode\expandafter`\thearg=0\relax + \numericenumerate % a number (we hope) + \else + % It's a letter. + \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax + \lowercaseenumerate % lowercase letter + \else + \uppercaseenumerate % uppercase letter + \fi + \fi + \else + % Multiple tokens in the argument. We hope it's a number. + \numericenumerate + \fi +} + +% An @enumerate whose labels are integers. The starting integer is +% given in \thearg. +% +\def\numericenumerate{% + \itemno = \thearg + \startenumeration{\the\itemno}% +} + +% The starting (lowercase) letter is in \thearg. +\def\lowercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more lowercase letters in @enumerate; get a bigger + alphabet}% + \fi + \char\lccode\itemno + }% +} + +% The starting (uppercase) letter is in \thearg. +\def\uppercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more uppercase letters in @enumerate; get a bigger + alphabet} + \fi + \char\uccode\itemno + }% +} + +% Call \doitemize, adding a period to the first argument and supplying the +% common last two arguments. Also subtract one from the initial value in +% \itemno, since @item increments \itemno. +% +\def\startenumeration#1{% + \advance\itemno by -1 + \doitemize{#1.}\flushcr +} + +% @alphaenumerate and @capsenumerate are abbreviations for giving an arg +% to @enumerate. +% +\def\alphaenumerate{\enumerate{a}} +\def\capsenumerate{\enumerate{A}} +\def\Ealphaenumerate{\Eenumerate} +\def\Ecapsenumerate{\Eenumerate} + + +% @multitable macros +% Amy Hendrickson, 8/18/94, 3/6/96 +% +% @multitable ... @end multitable will make as many columns as desired. +% Contents of each column will wrap at width given in preamble. Width +% can be specified either with sample text given in a template line, +% or in percent of \hsize, the current width of text on page. + +% Table can continue over pages but will only break between lines. + +% To make preamble: +% +% Either define widths of columns in terms of percent of \hsize: +% @multitable @columnfractions .25 .3 .45 +% @item ... +% +% Numbers following @columnfractions are the percent of the total +% current hsize to be used for each column. You may use as many +% columns as desired. + + +% Or use a template: +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item ... +% using the widest term desired in each column. + +% Each new table line starts with @item, each subsequent new column +% starts with @tab. Empty columns may be produced by supplying @tab's +% with nothing between them for as many times as empty columns are needed, +% ie, @tab@tab@tab will produce two empty columns. + +% @item, @tab do not need to be on their own lines, but it will not hurt +% if they are. + +% Sample multitable: + +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item first col stuff @tab second col stuff @tab third col +% @item +% first col stuff +% @tab +% second col stuff +% @tab +% third col +% @item first col stuff @tab second col stuff +% @tab Many paragraphs of text may be used in any column. +% +% They will wrap at the width determined by the template. +% @item@tab@tab This will be in third column. +% @end multitable + +% Default dimensions may be reset by user. +% @multitableparskip is vertical space between paragraphs in table. +% @multitableparindent is paragraph indent in table. +% @multitablecolmargin is horizontal space to be left between columns. +% @multitablelinespace is space to leave between table items, baseline +% to baseline. +% 0pt means it depends on current normal line spacing. +% +\newskip\multitableparskip +\newskip\multitableparindent +\newdimen\multitablecolspace +\newskip\multitablelinespace +\multitableparskip=0pt +\multitableparindent=6pt +\multitablecolspace=12pt +\multitablelinespace=0pt + +% Macros used to set up halign preamble: +% +\let\endsetuptable\relax +\def\xendsetuptable{\endsetuptable} +\let\columnfractions\relax +\def\xcolumnfractions{\columnfractions} +\newif\ifsetpercent + +% #1 is the @columnfraction, usually a decimal number like .5, but might +% be just 1. We just use it, whatever it is. +% +\def\pickupwholefraction#1 {% + \global\advance\colcount by 1 + \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% + \setuptable +} + +\newcount\colcount +\def\setuptable#1{% + \def\firstarg{#1}% + \ifx\firstarg\xendsetuptable + \let\go = \relax + \else + \ifx\firstarg\xcolumnfractions + \global\setpercenttrue + \else + \ifsetpercent + \let\go\pickupwholefraction + \else + \global\advance\colcount by 1 + \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a + % separator; typically that is always in the input, anyway. + \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% + \fi + \fi + \ifx\go\pickupwholefraction + % Put the argument back for the \pickupwholefraction call, so + % we'll always have a period there to be parsed. + \def\go{\pickupwholefraction#1}% + \else + \let\go = \setuptable + \fi% + \fi + \go +} + +% multitable-only commands. +% +% @headitem starts a heading row, which we typeset in bold. +% Assignments have to be global since we are inside the implicit group +% of an alignment entry. \everycr resets \everytab so we don't have to +% undo it ourselves. +\def\headitemfont{\b}% for people to use in the template row; not changeable +\def\headitem{% + \checkenv\multitable + \crcr + \global\everytab={\bf}% can't use \headitemfont since the parsing differs + \the\everytab % for the first item +}% +% +% A \tab used to include \hskip1sp. But then the space in a template +% line is not enough. That is bad. So let's go back to just `&' until +% we again encounter the problem the 1sp was intended to solve. +% --karl, nathan@acm.org, 20apr99. +\def\tab{\checkenv\multitable &\the\everytab}% + +% @multitable ... @end multitable definitions: +% +\newtoks\everytab % insert after every tab. +% +\envdef\multitable{% + \vskip\parskip + \startsavinginserts + % + % @item within a multitable starts a normal row. + % We use \def instead of \let so that if one of the multitable entries + % contains an @itemize, we don't choke on the \item (seen as \crcr aka + % \endtemplate) expanding \doitemize. + \def\item{\crcr}% + % + \tolerance=9500 + \hbadness=9500 + \setmultitablespacing + \parskip=\multitableparskip + \parindent=\multitableparindent + \overfullrule=0pt + \global\colcount=0 + % + \everycr = {% + \noalign{% + \global\everytab={}% + \global\colcount=0 % Reset the column counter. + % Check for saved footnotes, etc. + \checkinserts + % Keeps underfull box messages off when table breaks over pages. + %\filbreak + % Maybe so, but it also creates really weird page breaks when the + % table breaks over pages. Wouldn't \vfil be better? Wait until the + % problem manifests itself, so it can be fixed for real --karl. + }% + }% + % + \parsearg\domultitable +} +\def\domultitable#1{% + % To parse everything between @multitable and @item: + \setuptable#1 \endsetuptable + % + % This preamble sets up a generic column definition, which will + % be used as many times as user calls for columns. + % \vtop will set a single line and will also let text wrap and + % continue for many paragraphs if desired. + \halign\bgroup &% + \global\advance\colcount by 1 + \multistrut + \vtop{% + % Use the current \colcount to find the correct column width: + \hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip + \else + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace + \fi + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace + \fi + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively + % marking characters. + \noindent\ignorespaces##\unskip\multistrut + }\cr +} +\def\Emultitable{% + \crcr + \egroup % end the \halign + \global\setpercentfalse +} + +\def\setmultitablespacing{% + \def\multistrut{\strut}% just use the standard line spacing + % + % Compute \multitablelinespace (if not defined by user) for use in + % \multitableparskip calculation. We used define \multistrut based on + % this, but (ironically) that caused the spacing to be off. + % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. +\ifdim\multitablelinespace=0pt +\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip +\global\advance\multitablelinespace by-\ht0 +\fi +%% Test to see if parskip is larger than space between lines of +%% table. If not, do nothing. +%% If so, set to same dimension as multitablelinespace. +\ifdim\multitableparskip>\multitablelinespace +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller + %% than skip between lines in the table. +\fi% +\ifdim\multitableparskip=0pt +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller + %% than skip between lines in the table. +\fi} + + +\message{conditionals,} + +% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext, +% @ifnotxml always succeed. They currently do nothing; we don't +% attempt to check whether the conditionals are properly nested. But we +% have to remember that they are conditionals, so that @end doesn't +% attempt to close an environment group. +% +\def\makecond#1{% + \expandafter\let\csname #1\endcsname = \relax + \expandafter\let\csname iscond.#1\endcsname = 1 +} +\makecond{iftex} +\makecond{ifnotdocbook} +\makecond{ifnothtml} +\makecond{ifnotinfo} +\makecond{ifnotplaintext} +\makecond{ifnotxml} + +% Ignore @ignore, @ifhtml, @ifinfo, and the like. +% +\def\direntry{\doignore{direntry}} +\def\documentdescription{\doignore{documentdescription}} +\def\docbook{\doignore{docbook}} +\def\html{\doignore{html}} +\def\ifdocbook{\doignore{ifdocbook}} +\def\ifhtml{\doignore{ifhtml}} +\def\ifinfo{\doignore{ifinfo}} +\def\ifnottex{\doignore{ifnottex}} +\def\ifplaintext{\doignore{ifplaintext}} +\def\ifxml{\doignore{ifxml}} +\def\ignore{\doignore{ignore}} +\def\menu{\doignore{menu}} +\def\xml{\doignore{xml}} + +% Ignore text until a line `@end #1', keeping track of nested conditionals. +% +% A count to remember the depth of nesting. +\newcount\doignorecount + +\def\doignore#1{\begingroup + % Scan in ``verbatim'' mode: + \obeylines + \catcode`\@ = \other + \catcode`\{ = \other + \catcode`\} = \other + % + % Make sure that spaces turn into tokens that match what \doignoretext wants. + \spaceisspace + % + % Count number of #1's that we've seen. + \doignorecount = 0 + % + % Swallow text until we reach the matching `@end #1'. + \dodoignore{#1}% +} + +{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source. + \obeylines % + % + \gdef\dodoignore#1{% + % #1 contains the command name as a string, e.g., `ifinfo'. + % + % Define a command to find the next `@end #1'. + \long\def\doignoretext##1^^M@end #1{% + \doignoretextyyy##1^^M@#1\_STOP_}% + % + % And this command to find another #1 command, at the beginning of a + % line. (Otherwise, we would consider a line `@c @ifset', for + % example, to count as an @ifset for nesting.) + \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% + % + % And now expand that command. + \doignoretext ^^M% + }% +} + +\def\doignoreyyy#1{% + \def\temp{#1}% + \ifx\temp\empty % Nothing found. + \let\next\doignoretextzzz + \else % Found a nested condition, ... + \advance\doignorecount by 1 + \let\next\doignoretextyyy % ..., look for another. + % If we're here, #1 ends with ^^M\ifinfo (for example). + \fi + \next #1% the token \_STOP_ is present just after this macro. +} + +% We have to swallow the remaining "\_STOP_". +% +\def\doignoretextzzz#1{% + \ifnum\doignorecount = 0 % We have just found the outermost @end. + \let\next\enddoignore + \else % Still inside a nested condition. + \advance\doignorecount by -1 + \let\next\doignoretext % Look for the next @end. + \fi + \next +} + +% Finish off ignored text. +{ \obeylines% + % Ignore anything after the last `@end #1'; this matters in verbatim + % environments, where otherwise the newline after an ignored conditional + % would result in a blank line in the output. + \gdef\enddoignore#1^^M{\endgroup\ignorespaces}% +} + + +% @set VAR sets the variable VAR to an empty value. +% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. +% +% Since we want to separate VAR from REST-OF-LINE (which might be +% empty), we can't just use \parsearg; we have to insert a space of our +% own to delimit the rest of the line, and then take it out again if we +% didn't need it. +% We rely on the fact that \parsearg sets \catcode`\ =10. +% +\parseargdef\set{\setyyy#1 \endsetyyy} +\def\setyyy#1 #2\endsetyyy{% + {% + \makevalueexpandable + \def\temp{#2}% + \edef\next{\gdef\makecsname{SET#1}}% + \ifx\temp\empty + \next{}% + \else + \setzzz#2\endsetzzz + \fi + }% +} +% Remove the trailing space \setxxx inserted. +\def\setzzz#1 \endsetzzz{\next{#1}} + +% @clear VAR clears (i.e., unsets) the variable VAR. +% +\parseargdef\clear{% + {% + \makevalueexpandable + \global\expandafter\let\csname SET#1\endcsname=\relax + }% +} + +% @value{foo} gets the text saved in variable foo. +\def\value{\begingroup\makevalueexpandable\valuexxx} +\def\valuexxx#1{\expandablevalue{#1}\endgroup} +{ + \catcode`\- = \active \catcode`\_ = \active + % + \gdef\makevalueexpandable{% + \let\value = \expandablevalue + % We don't want these characters active, ... + \catcode`\-=\other \catcode`\_=\other + % ..., but we might end up with active ones in the argument if + % we're called from @code, as @code{@value{foo-bar_}}, though. + % So \let them to their normal equivalents. + \let-\realdash \let_\normalunderscore + } +} + +% We have this subroutine so that we can handle at least some @value's +% properly in indexes (we call \makevalueexpandable in \indexdummies). +% The command has to be fully expandable (if the variable is set), since +% the result winds up in the index file. This means that if the +% variable's value contains other Texinfo commands, it's almost certain +% it will fail (although perhaps we could fix that with sufficient work +% to do a one-level expansion on the result, instead of complete). +% +\def\expandablevalue#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + {[No value for ``#1'']}% + \message{Variable `#1', used in @value, is not set.}% + \else + \csname SET#1\endcsname + \fi +} + +% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined +% with @set. +% +% To get special treatment of `@end ifset,' call \makeond and the redefine. +% +\makecond{ifset} +\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} +\def\doifset#1#2{% + {% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname SET#2\endcsname\relax + #1% If not set, redefine \next. + \fi + \expandafter + }\next +} +\def\ifsetfail{\doignore{ifset}} + +% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% defined with @set, or has been undefined with @clear. +% +% The `\else' inside the `\doifset' parameter is a trick to reuse the +% above code: if the variable is not set, do nothing, if it is set, +% then redefine \next to \ifclearfail. +% +\makecond{ifclear} +\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} +\def\ifclearfail{\doignore{ifclear}} + +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory=\comment + +% @defininfoenclose. +\let\definfoenclose=\comment + + +\message{indexing,} +% Index generation facilities + +% Define \newwrite to be identical to plain tex's \newwrite +% except not \outer, so it can be used within macros and \if's. +\edef\newwrite{\makecsname{ptexnewwrite}} + +% \newindex {foo} defines an index named foo. +% It automatically defines \fooindex such that +% \fooindex ...rest of line... puts an entry in the index foo. +% It also defines \fooindfile to be the number of the output channel for +% the file that accumulates this index. The file's extension is foo. +% The name of an index should be no more than 2 characters long +% for the sake of vms. +% +\def\newindex#1{% + \iflinks + \expandafter\newwrite \csname#1indfile\endcsname + \openout \csname#1indfile\endcsname \jobname.#1 % Open the file + \fi + \expandafter\xdef\csname#1index\endcsname{% % Define @#1index + \noexpand\doindex{#1}} +} + +% @defindex foo == \newindex{foo} +% +\def\defindex{\parsearg\newindex} + +% Define @defcodeindex, like @defindex except put all entries in @code. +% +\def\defcodeindex{\parsearg\newcodeindex} +% +\def\newcodeindex#1{% + \iflinks + \expandafter\newwrite \csname#1indfile\endcsname + \openout \csname#1indfile\endcsname \jobname.#1 + \fi + \expandafter\xdef\csname#1index\endcsname{% + \noexpand\docodeindex{#1}}% +} + + +% @synindex foo bar makes index foo feed into index bar. +% Do this instead of @defindex foo if you don't want it as a separate index. +% +% @syncodeindex foo bar similar, but put all entries made for index foo +% inside @code. +% +\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}} +\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}} + +% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo), +% #3 the target index (bar). +\def\dosynindex#1#2#3{% + % Only do \closeout if we haven't already done it, else we'll end up + % closing the target index. + \expandafter \ifx\csname donesynindex#2\endcsname \relax + % The \closeout helps reduce unnecessary open files; the limit on the + % Acorn RISC OS is a mere 16 files. + \expandafter\closeout\csname#2indfile\endcsname + \expandafter\let\csname donesynindex#2\endcsname = 1 + \fi + % redefine \fooindfile: + \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname + \expandafter\let\csname#2indfile\endcsname=\temp + % redefine \fooindex: + \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}% +} + +% Define \doindex, the driver for all \fooindex macros. +% Argument #1 is generated by the calling \fooindex macro, +% and it is "foo", the name of the index. + +% \doindex just uses \parsearg; it calls \doind for the actual work. +% This is because \doind is more useful to call from other macros. + +% There is also \dosubind {index}{topic}{subtopic} +% which makes an entry in a two-level index such as the operation index. + +\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} +\def\singleindexer #1{\doind{\indexname}{#1}} + +% like the previous two, but they put @code around the argument. +\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} +\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} + +% Take care of Texinfo commands that can appear in an index entry. +% Since there are some commands we want to expand, and others we don't, +% we have to laboriously prevent expansion for those that we don't. +% +\def\indexdummies{% + \escapechar = `\\ % use backslash in output files. + \def\@{@}% change to @@ when we switch to @ as escape char in index files. + \def\ {\realbackslash\space }% + % + % Need these in case \tex is in effect and \{ is a \delimiter again. + % But can't use \lbracecmd and \rbracecmd because texindex assumes + % braces and backslashes are used only as delimiters. + \let\{ = \mylbrace + \let\} = \myrbrace + % + % I don't entirely understand this, but when an index entry is + % generated from a macro call, the \endinput which \scanmacro inserts + % causes processing to be prematurely terminated. This is, + % apparently, because \indexsorttmp is fully expanded, and \endinput + % is an expandable command. The redefinition below makes \endinput + % disappear altogether for that purpose -- although logging shows that + % processing continues to some further point. On the other hand, it + % seems \endinput does not hurt in the printed index arg, since that + % is still getting written without apparent harm. + % + % Sample source (mac-idx3.tex, reported by Graham Percival to + % help-texinfo, 22may06): + % @macro funindex {WORD} + % @findex xyz + % @end macro + % ... + % @funindex commtest + % + % The above is not enough to reproduce the bug, but it gives the flavor. + % + % Sample whatsit resulting: + % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}} + % + % So: + \let\endinput = \empty + % + % Do the redefinitions. + \commondummies +} + +% For the aux and toc files, @ is the escape character. So we want to +% redefine everything using @ as the escape character (instead of +% \realbackslash, still used for index files). When everything uses @, +% this will be simpler. +% +\def\atdummies{% + \def\@{@@}% + \def\ {@ }% + \let\{ = \lbraceatcmd + \let\} = \rbraceatcmd + % + % Do the redefinitions. + \commondummies + \otherbackslash +} + +% Called from \indexdummies and \atdummies. +% +\def\commondummies{% + % + % \definedummyword defines \#1 as \string\#1\space, thus effectively + % preventing its expansion. This is used only for control% words, + % not control letters, because the \space would be incorrect for + % control characters, but is needed to separate the control word + % from whatever follows. + % + % For control letters, we have \definedummyletter, which omits the + % space. + % + % These can be used both for control words that take an argument and + % those that do not. If it is followed by {arg} in the input, then + % that will dutifully get written to the index (or wherever). + % + \def\definedummyword ##1{\def##1{\string##1\space}}% + \def\definedummyletter##1{\def##1{\string##1}}% + \let\definedummyaccent\definedummyletter + % + \commondummiesnofonts + % + \definedummyletter\_% + % + % Non-English letters. + \definedummyword\AA + \definedummyword\AE + \definedummyword\DH + \definedummyword\L + \definedummyword\O + \definedummyword\OE + \definedummyword\TH + \definedummyword\aa + \definedummyword\ae + \definedummyword\dh + \definedummyword\exclamdown + \definedummyword\l + \definedummyword\o + \definedummyword\oe + \definedummyword\ordf + \definedummyword\ordm + \definedummyword\questiondown + \definedummyword\ss + \definedummyword\th + % + % Although these internal commands shouldn't show up, sometimes they do. + \definedummyword\bf + \definedummyword\gtr + \definedummyword\hat + \definedummyword\less + \definedummyword\sf + \definedummyword\sl + \definedummyword\tclose + \definedummyword\tt + % + \definedummyword\LaTeX + \definedummyword\TeX + % + % Assorted special characters. + \definedummyword\bullet + \definedummyword\comma + \definedummyword\copyright + \definedummyword\registeredsymbol + \definedummyword\dots + \definedummyword\enddots + \definedummyword\equiv + \definedummyword\error + \definedummyword\euro + \definedummyword\guillemetleft + \definedummyword\guillemetright + \definedummyword\guilsinglleft + \definedummyword\guilsinglright + \definedummyword\expansion + \definedummyword\minus + \definedummyword\ogonek + \definedummyword\pounds + \definedummyword\point + \definedummyword\print + \definedummyword\quotedblbase + \definedummyword\quotedblleft + \definedummyword\quotedblright + \definedummyword\quoteleft + \definedummyword\quoteright + \definedummyword\quotesinglbase + \definedummyword\result + \definedummyword\textdegree + % + % We want to disable all macros so that they are not expanded by \write. + \macrolist + % + \normalturnoffactive + % + % Handle some cases of @value -- where it does not contain any + % (non-fully-expandable) commands. + \makevalueexpandable +} + +% \commondummiesnofonts: common to \commondummies and \indexnofonts. +% +\def\commondummiesnofonts{% + % Control letters and accents. + \definedummyletter\!% + \definedummyaccent\"% + \definedummyaccent\'% + \definedummyletter\*% + \definedummyaccent\,% + \definedummyletter\.% + \definedummyletter\/% + \definedummyletter\:% + \definedummyaccent\=% + \definedummyletter\?% + \definedummyaccent\^% + \definedummyaccent\`% + \definedummyaccent\~% + \definedummyword\u + \definedummyword\v + \definedummyword\H + \definedummyword\dotaccent + \definedummyword\ogonek + \definedummyword\ringaccent + \definedummyword\tieaccent + \definedummyword\ubaraccent + \definedummyword\udotaccent + \definedummyword\dotless + % + % Texinfo font commands. + \definedummyword\b + \definedummyword\i + \definedummyword\r + \definedummyword\sc + \definedummyword\t + % + % Commands that take arguments. + \definedummyword\acronym + \definedummyword\cite + \definedummyword\code + \definedummyword\command + \definedummyword\dfn + \definedummyword\email + \definedummyword\emph + \definedummyword\env + \definedummyword\file + \definedummyword\kbd + \definedummyword\key + \definedummyword\math + \definedummyword\option + \definedummyword\pxref + \definedummyword\ref + \definedummyword\samp + \definedummyword\strong + \definedummyword\tie + \definedummyword\uref + \definedummyword\url + \definedummyword\var + \definedummyword\verb + \definedummyword\w + \definedummyword\xref +} + +% \indexnofonts is used when outputting the strings to sort the index +% by, and when constructing control sequence names. It eliminates all +% control sequences and just writes whatever the best ASCII sort string +% would be for a given command (usually its argument). +% +\def\indexnofonts{% + % Accent commands should become @asis. + \def\definedummyaccent##1{\let##1\asis}% + % We can just ignore other control letters. + \def\definedummyletter##1{\let##1\empty}% + % Hopefully, all control words can become @asis. + \let\definedummyword\definedummyaccent + % + \commondummiesnofonts + % + % Don't no-op \tt, since it isn't a user-level command + % and is used in the definitions of the active chars like <, >, |, etc. + % Likewise with the other plain tex font commands. + %\let\tt=\asis + % + \def\ { }% + \def\@{@}% + % how to handle braces? + \def\_{\normalunderscore}% + % + % Non-English letters. + \def\AA{AA}% + \def\AE{AE}% + \def\DH{DZZ}% + \def\L{L}% + \def\OE{OE}% + \def\O{O}% + \def\TH{ZZZ}% + \def\aa{aa}% + \def\ae{ae}% + \def\dh{dzz}% + \def\exclamdown{!}% + \def\l{l}% + \def\oe{oe}% + \def\ordf{a}% + \def\ordm{o}% + \def\o{o}% + \def\questiondown{?}% + \def\ss{ss}% + \def\th{zzz}% + % + \def\LaTeX{LaTeX}% + \def\TeX{TeX}% + % + % Assorted special characters. + % (The following {} will end up in the sort string, but that's ok.) + \def\bullet{bullet}% + \def\comma{,}% + \def\copyright{copyright}% + \def\dots{...}% + \def\enddots{...}% + \def\equiv{==}% + \def\error{error}% + \def\euro{euro}% + \def\expansion{==>}% + \def\guillemetleft{<<}% + \def\guillemetright{>>}% + \def\guilsinglleft{<}% + \def\guilsinglright{>}% + \def\minus{-}% + \def\point{.}% + \def\pounds{pounds}% + \def\print{-|}% + \def\quotedblbase{"}% + \def\quotedblleft{"}% + \def\quotedblright{"}% + \def\quoteleft{`}% + \def\quoteright{'}% + \def\quotesinglbase{,}% + \def\registeredsymbol{R}% + \def\result{=>}% + \def\textdegree{o}% + % + % We need to get rid of all macros, leaving only the arguments (if present). + % Of course this is not nearly correct, but it is the best we can do for now. + % makeinfo does not expand macros in the argument to @deffn, which ends up + % writing an index entry, and texindex isn't prepared for an index sort entry + % that starts with \. + % + % Since macro invocations are followed by braces, we can just redefine them + % to take a single TeX argument. The case of a macro invocation that + % goes to end-of-line is not handled. + % + \macrolist +} + +\let\indexbackslash=0 %overridden during \printindex. +\let\SETmarginindex=\relax % put index entries in margin (undocumented)? + +% Most index entries go through here, but \dosubind is the general case. +% #1 is the index name, #2 is the entry text. +\def\doind#1#2{\dosubind{#1}{#2}{}} + +% Workhorse for all \fooindexes. +% #1 is name of index, #2 is stuff to put there, #3 is subentry -- +% empty if called from \doind, as we usually are (the main exception +% is with most defuns, which call us directly). +% +\def\dosubind#1#2#3{% + \iflinks + {% + % Store the main index entry text (including the third arg). + \toks0 = {#2}% + % If third arg is present, precede it with a space. + \def\thirdarg{#3}% + \ifx\thirdarg\empty \else + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + \edef\writeto{\csname#1indfile\endcsname}% + % + \safewhatsit\dosubindwrite + }% + \fi +} + +% Write the entry in \toks0 to the index file: +% +\def\dosubindwrite{% + % Put the index entry in the margin if desired. + \ifx\SETmarginindex\relax\else + \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}% + \fi + % + % Remember, we are within a group. + \indexdummies % Must do this here, since \bf, etc expand at this stage + \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now + % so it will be output as is; and it will print as backslash. + % + % Process the index entry with all font commands turned off, to + % get the string to sort by. + {\indexnofonts + \edef\temp{\the\toks0}% need full expansion + \xdef\indexsorttmp{\temp}% + }% + % + % Set up the complete index entry, with both the sort key and + % the original text, including any font commands. We write + % three arguments to \entry to the .?? file (four in the + % subentry case), texindex reduces to two when writing the .??s + % sorted result. + \edef\temp{% + \write\writeto{% + \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}% + }% + \temp +} + +% Take care of unwanted page breaks/skips around a whatsit: +% +% If a skip is the last thing on the list now, preserve it +% by backing up by \lastskip, doing the \write, then inserting +% the skip again. Otherwise, the whatsit generated by the +% \write or \pdfdest will make \lastskip zero. The result is that +% sequences like this: +% @end defun +% @tindex whatever +% @defun ... +% will have extra space inserted, because the \medbreak in the +% start of the @defun won't see the skip inserted by the @end of +% the previous defun. +% +% But don't do any of this if we're not in vertical mode. We +% don't want to do a \vskip and prematurely end a paragraph. +% +% Avoid page breaks due to these extra skips, too. +% +% But wait, there is a catch there: +% We'll have to check whether \lastskip is zero skip. \ifdim is not +% sufficient for this purpose, as it ignores stretch and shrink parts +% of the skip. The only way seems to be to check the textual +% representation of the skip. +% +% The following is almost like \def\zeroskipmacro{0.0pt} except that +% the ``p'' and ``t'' characters have catcode \other, not 11 (letter). +% +\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname} +% +\newskip\whatsitskip +\newcount\whatsitpenalty +% +% ..., ready, GO: +% +\def\safewhatsit#1{% +\ifhmode + #1% +\else + % \lastskip and \lastpenalty cannot both be nonzero simultaneously. + \whatsitskip = \lastskip + \edef\lastskipmacro{\the\lastskip}% + \whatsitpenalty = \lastpenalty + % + % If \lastskip is nonzero, that means the last item was a + % skip. And since a skip is discardable, that means this + % -\whatsitskip glue we're inserting is preceded by a + % non-discardable item, therefore it is not a potential + % breakpoint, therefore no \nobreak needed. + \ifx\lastskipmacro\zeroskipmacro + \else + \vskip-\whatsitskip + \fi + % + #1% + % + \ifx\lastskipmacro\zeroskipmacro + % If \lastskip was zero, perhaps the last item was a penalty, and + % perhaps it was >=10000, e.g., a \nobreak. In that case, we want + % to re-insert the same penalty (values >10000 are used for various + % signals); since we just inserted a non-discardable item, any + % following glue (such as a \parskip) would be a breakpoint. For example: + % + % @deffn deffn-whatever + % @vindex index-whatever + % Description. + % would allow a break between the index-whatever whatsit + % and the "Description." paragraph. + \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi + \else + % On the other hand, if we had a nonzero \lastskip, + % this make-up glue would be preceded by a non-discardable item + % (the whatsit from the \write), so we must insert a \nobreak. + \nobreak\vskip\whatsitskip + \fi +\fi +} + +% The index entry written in the file actually looks like +% \entry {sortstring}{page}{topic} +% or +% \entry {sortstring}{page}{topic}{subtopic} +% The texindex program reads in these files and writes files +% containing these kinds of lines: +% \initial {c} +% before the first topic whose initial is c +% \entry {topic}{pagelist} +% for a topic that is used without subtopics +% \primary {topic} +% for the beginning of a topic that is used with subtopics +% \secondary {subtopic}{pagelist} +% for each subtopic. + +% Define the user-accessible indexing commands +% @findex, @vindex, @kindex, @cindex. + +\def\findex {\fnindex} +\def\kindex {\kyindex} +\def\cindex {\cpindex} +\def\vindex {\vrindex} +\def\tindex {\tpindex} +\def\pindex {\pgindex} + +\def\cindexsub {\begingroup\obeylines\cindexsub} +{\obeylines % +\gdef\cindexsub "#1" #2^^M{\endgroup % +\dosubind{cp}{#2}{#1}}} + +% Define the macros used in formatting output of the sorted index material. + +% @printindex causes a particular index (the ??s file) to get printed. +% It does not print any chapter heading (usually an @unnumbered). +% +\parseargdef\printindex{\begingroup + \dobreak \chapheadingskip{10000}% + % + \smallfonts \rm + \tolerance = 9500 + \plainfrenchspacing + \everypar = {}% don't want the \kern\-parindent from indentation suppression. + % + % See if the index file exists and is nonempty. + % Change catcode of @ here so that if the index file contains + % \initial {@} + % as its first line, TeX doesn't complain about mismatched braces + % (because it thinks @} is a control sequence). + \catcode`\@ = 11 + \openin 1 \jobname.#1s + \ifeof 1 + % \enddoublecolumns gets confused if there is no text in the index, + % and it loses the chapter title and the aux file entries for the + % index. The easiest way to prevent this problem is to make sure + % there is some text. + \putwordIndexNonexistent + \else + % + % If the index file exists but is empty, then \openin leaves \ifeof + % false. We have to make TeX try to read something from the file, so + % it can discover if there is anything in it. + \read 1 to \temp + \ifeof 1 + \putwordIndexIsEmpty + \else + % Index files are almost Texinfo source, but we use \ as the escape + % character. It would be better to use @, but that's too big a change + % to make right now. + \def\indexbackslash{\backslashcurfont}% + \catcode`\\ = 0 + \escapechar = `\\ + \begindoublecolumns + \input \jobname.#1s + \enddoublecolumns + \fi + \fi + \closein 1 +\endgroup} + +% These macros are used by the sorted index file itself. +% Change them to control the appearance of the index. + +\def\initial#1{{% + % Some minor font changes for the special characters. + \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt + % + % Remove any glue we may have, we'll be inserting our own. + \removelastskip + % + % We like breaks before the index initials, so insert a bonus. + \nobreak + \vskip 0pt plus 3\baselineskip + \penalty 0 + \vskip 0pt plus -3\baselineskip + % + % Typeset the initial. Making this add up to a whole number of + % baselineskips increases the chance of the dots lining up from column + % to column. It still won't often be perfect, because of the stretch + % we need before each entry, but it's better. + % + % No shrink because it confuses \balancecolumns. + \vskip 1.67\baselineskip plus .5\baselineskip + \leftline{\secbf #1}% + % Do our best not to break after the initial. + \nobreak + \vskip .33\baselineskip plus .1\baselineskip +}} + +% \entry typesets a paragraph consisting of the text (#1), dot leaders, and +% then page number (#2) flushed to the right margin. It is used for index +% and table of contents entries. The paragraph is indented by \leftskip. +% +% A straightforward implementation would start like this: +% \def\entry#1#2{... +% But this freezes the catcodes in the argument, and can cause problems to +% @code, which sets - active. This problem was fixed by a kludge--- +% ``-'' was active throughout whole index, but this isn't really right. +% +% The right solution is to prevent \entry from swallowing the whole text. +% --kasal, 21nov03 +\def\entry{% + \begingroup + % + % Start a new paragraph if necessary, so our assignments below can't + % affect previous text. + \par + % + % Do not fill out the last line with white space. + \parfillskip = 0in + % + % No extra space above this paragraph. + \parskip = 0in + % + % Do not prefer a separate line ending with a hyphen to fewer lines. + \finalhyphendemerits = 0 + % + % \hangindent is only relevant when the entry text and page number + % don't both fit on one line. In that case, bob suggests starting the + % dots pretty far over on the line. Unfortunately, a large + % indentation looks wrong when the entry text itself is broken across + % lines. So we use a small indentation and put up with long leaders. + % + % \hangafter is reset to 1 (which is the value we want) at the start + % of each paragraph, so we need not do anything with that. + \hangindent = 2em + % + % When the entry text needs to be broken, just fill out the first line + % with blank space. + \rightskip = 0pt plus1fil + % + % A bit of stretch before each entry for the benefit of balancing + % columns. + \vskip 0pt plus1pt + % + % Swallow the left brace of the text (first parameter): + \afterassignment\doentry + \let\temp = +} +\def\doentry{% + \bgroup % Instead of the swallowed brace. + \noindent + \aftergroup\finishentry + % And now comes the text of the entry. +} +\def\finishentry#1{% + % #1 is the page number. + % + % The following is kludged to not output a line of dots in the index if + % there are no page numbers. The next person who breaks this will be + % cursed by a Unix daemon. + \setbox\boxA = \hbox{#1}% + \ifdim\wd\boxA = 0pt + \ % + \else + % + % If we must, put the page number on a line of its own, and fill out + % this line with blank space. (The \hfil is overwhelmed with the + % fill leaders glue in \indexdotfill if the page number does fit.) + \hfil\penalty50 + \null\nobreak\indexdotfill % Have leaders before the page number. + % + % The `\ ' here is removed by the implicit \unskip that TeX does as + % part of (the primitive) \par. Without it, a spurious underfull + % \hbox ensues. + \ifpdf + \pdfgettoks#1.% + \ \the\toksA + \else + \ #1% + \fi + \fi + \par + \endgroup +} + +% Like plain.tex's \dotfill, except uses up at least 1 em. +\def\indexdotfill{\cleaders + \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill} + +\def\primary #1{\line{#1\hfil}} + +\newskip\secondaryindent \secondaryindent=0.5cm +\def\secondary#1#2{{% + \parfillskip=0in + \parskip=0in + \hangindent=1in + \hangafter=1 + \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill + \ifpdf + \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. + \else + #2 + \fi + \par +}} + +% Define two-column mode, which we use to typeset indexes. +% Adapted from the TeXbook, page 416, which is to say, +% the manmac.tex format used to print the TeXbook itself. +\catcode`\@=11 + +\newbox\partialpage +\newdimen\doublecolumnhsize + +\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns + % Grab any single-column material above us. + \output = {% + % + % Here is a possibility not foreseen in manmac: if we accumulate a + % whole lot of material, we might end up calling this \output + % routine twice in a row (see the doublecol-lose test, which is + % essentially a couple of indexes with @setchapternewpage off). In + % that case we just ship out what is in \partialpage with the normal + % output routine. Generally, \partialpage will be empty when this + % runs and this will be a no-op. See the indexspread.tex test case. + \ifvoid\partialpage \else + \onepageout{\pagecontents\partialpage}% + \fi + % + \global\setbox\partialpage = \vbox{% + % Unvbox the main output page. + \unvbox\PAGE + \kern-\topskip \kern\baselineskip + }% + }% + \eject % run that output routine to set \partialpage + % + % Use the double-column output routine for subsequent pages. + \output = {\doublecolumnout}% + % + % Change the page size parameters. We could do this once outside this + % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 + % format, but then we repeat the same computation. Repeating a couple + % of assignments once per index is clearly meaningless for the + % execution time, so we may as well do it in one place. + % + % First we halve the line length, less a little for the gutter between + % the columns. We compute the gutter based on the line length, so it + % changes automatically with the paper format. The magic constant + % below is chosen so that the gutter has the same value (well, +-<1pt) + % as it did when we hard-coded it. + % + % We put the result in a separate register, \doublecolumhsize, so we + % can restore it in \pagesofar, after \hsize itself has (potentially) + % been clobbered. + % + \doublecolumnhsize = \hsize + \advance\doublecolumnhsize by -.04154\hsize + \divide\doublecolumnhsize by 2 + \hsize = \doublecolumnhsize + % + % Double the \vsize as well. (We don't need a separate register here, + % since nobody clobbers \vsize.) + \vsize = 2\vsize +} + +% The double-column output routine for all double-column pages except +% the last. +% +\def\doublecolumnout{% + \splittopskip=\topskip \splitmaxdepth=\maxdepth + % Get the available space for the double columns -- the normal + % (undoubled) page height minus any material left over from the + % previous page. + \dimen@ = \vsize + \divide\dimen@ by 2 + \advance\dimen@ by -\ht\partialpage + % + % box0 will be the left-hand column, box2 the right. + \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ + \onepageout\pagesofar + \unvbox255 + \penalty\outputpenalty +} +% +% Re-output the contents of the output page -- any previous material, +% followed by the two boxes we just split, in box0 and box2. +\def\pagesofar{% + \unvbox\partialpage + % + \hsize = \doublecolumnhsize + \wd0=\hsize \wd2=\hsize + \hbox to\pagewidth{\box0\hfil\box2}% +} +% +% All done with double columns. +\def\enddoublecolumns{% + % The following penalty ensures that the page builder is exercised + % _before_ we change the output routine. This is necessary in the + % following situation: + % + % The last section of the index consists only of a single entry. + % Before this section, \pagetotal is less than \pagegoal, so no + % break occurs before the last section starts. However, the last + % section, consisting of \initial and the single \entry, does not + % fit on the page and has to be broken off. Without the following + % penalty the page builder will not be exercised until \eject + % below, and by that time we'll already have changed the output + % routine to the \balancecolumns version, so the next-to-last + % double-column page will be processed with \balancecolumns, which + % is wrong: The two columns will go to the main vertical list, with + % the broken-off section in the recent contributions. As soon as + % the output routine finishes, TeX starts reconsidering the page + % break. The two columns and the broken-off section both fit on the + % page, because the two columns now take up only half of the page + % goal. When TeX sees \eject from below which follows the final + % section, it invokes the new output routine that we've set after + % \balancecolumns below; \onepageout will try to fit the two columns + % and the final section into the vbox of \pageheight (see + % \pagebody), causing an overfull box. + % + % Note that glue won't work here, because glue does not exercise the + % page builder, unlike penalties (see The TeXbook, pp. 280-281). + \penalty0 + % + \output = {% + % Split the last of the double-column material. Leave it on the + % current page, no automatic page break. + \balancecolumns + % + % If we end up splitting too much material for the current page, + % though, there will be another page break right after this \output + % invocation ends. Having called \balancecolumns once, we do not + % want to call it again. Therefore, reset \output to its normal + % definition right away. (We hope \balancecolumns will never be + % called on to balance too much material, but if it is, this makes + % the output somewhat more palatable.) + \global\output = {\onepageout{\pagecontents\PAGE}}% + }% + \eject + \endgroup % started in \begindoublecolumns + % + % \pagegoal was set to the doubled \vsize above, since we restarted + % the current page. We're now back to normal single-column + % typesetting, so reset \pagegoal to the normal \vsize (after the + % \endgroup where \vsize got restored). + \pagegoal = \vsize +} +% +% Called at the end of the double column material. +\def\balancecolumns{% + \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. + \dimen@ = \ht0 + \advance\dimen@ by \topskip + \advance\dimen@ by-\baselineskip + \divide\dimen@ by 2 % target to split to + %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}% + \splittopskip = \topskip + % Loop until we get a decent breakpoint. + {% + \vbadness = 10000 + \loop + \global\setbox3 = \copy0 + \global\setbox1 = \vsplit3 to \dimen@ + \ifdim\ht3>\dimen@ + \global\advance\dimen@ by 1pt + \repeat + }% + %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}% + \setbox0=\vbox to\dimen@{\unvbox1}% + \setbox2=\vbox to\dimen@{\unvbox3}% + % + \pagesofar +} +\catcode`\@ = \other + + +\message{sectioning,} +% Chapters, sections, etc. + +% \unnumberedno is an oxymoron, of course. But we count the unnumbered +% sections so that we can refer to them unambiguously in the pdf +% outlines by their "section number". We avoid collisions with chapter +% numbers by starting them at 10000. (If a document ever has 10000 +% chapters, we're in trouble anyway, I'm sure.) +\newcount\unnumberedno \unnumberedno = 10000 +\newcount\chapno +\newcount\secno \secno=0 +\newcount\subsecno \subsecno=0 +\newcount\subsubsecno \subsubsecno=0 + +% This counter is funny since it counts through charcodes of letters A, B, ... +\newcount\appendixno \appendixno = `\@ +% +% \def\appendixletter{\char\the\appendixno} +% We do the following ugly conditional instead of the above simple +% construct for the sake of pdftex, which needs the actual +% letter in the expansion, not just typeset. +% +\def\appendixletter{% + \ifnum\appendixno=`A A% + \else\ifnum\appendixno=`B B% + \else\ifnum\appendixno=`C C% + \else\ifnum\appendixno=`D D% + \else\ifnum\appendixno=`E E% + \else\ifnum\appendixno=`F F% + \else\ifnum\appendixno=`G G% + \else\ifnum\appendixno=`H H% + \else\ifnum\appendixno=`I I% + \else\ifnum\appendixno=`J J% + \else\ifnum\appendixno=`K K% + \else\ifnum\appendixno=`L L% + \else\ifnum\appendixno=`M M% + \else\ifnum\appendixno=`N N% + \else\ifnum\appendixno=`O O% + \else\ifnum\appendixno=`P P% + \else\ifnum\appendixno=`Q Q% + \else\ifnum\appendixno=`R R% + \else\ifnum\appendixno=`S S% + \else\ifnum\appendixno=`T T% + \else\ifnum\appendixno=`U U% + \else\ifnum\appendixno=`V V% + \else\ifnum\appendixno=`W W% + \else\ifnum\appendixno=`X X% + \else\ifnum\appendixno=`Y Y% + \else\ifnum\appendixno=`Z Z% + % The \the is necessary, despite appearances, because \appendixletter is + % expanded while writing the .toc file. \char\appendixno is not + % expandable, thus it is written literally, thus all appendixes come out + % with the same letter (or @) in the toc without it. + \else\char\the\appendixno + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} + +% Each @chapter defines these (using marks) as the number+name, number +% and name of the chapter. Page headings and footings can use +% these. @section does likewise. +\def\thischapter{} +\def\thischapternum{} +\def\thischaptername{} +\def\thissection{} +\def\thissectionnum{} +\def\thissectionname{} + +\newcount\absseclevel % used to calculate proper heading level +\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count + +% @raisesections: treat @section as chapter, @subsection as section, etc. +\def\raisesections{\global\advance\secbase by -1} +\let\up=\raisesections % original BFox name + +% @lowersections: treat @chapter as section, @section as subsection, etc. +\def\lowersections{\global\advance\secbase by 1} +\let\down=\lowersections % original BFox name + +% we only have subsub. +\chardef\maxseclevel = 3 +% +% A numbered section within an unnumbered changes to unnumbered too. +% To achive this, remember the "biggest" unnum. sec. we are currently in: +\chardef\unmlevel = \maxseclevel +% +% Trace whether the current chapter is an appendix or not: +% \chapheadtype is "N" or "A", unnumbered chapters are ignored. +\def\chapheadtype{N} + +% Choose a heading macro +% #1 is heading type +% #2 is heading level +% #3 is text for heading +\def\genhead#1#2#3{% + % Compute the abs. sec. level: + \absseclevel=#2 + \advance\absseclevel by \secbase + % Make sure \absseclevel doesn't fall outside the range: + \ifnum \absseclevel < 0 + \absseclevel = 0 + \else + \ifnum \absseclevel > 3 + \absseclevel = 3 + \fi + \fi + % The heading type: + \def\headtype{#1}% + \if \headtype U% + \ifnum \absseclevel < \unmlevel + \chardef\unmlevel = \absseclevel + \fi + \else + % Check for appendix sections: + \ifnum \absseclevel = 0 + \edef\chapheadtype{\headtype}% + \else + \if \headtype A\if \chapheadtype N% + \errmessage{@appendix... within a non-appendix chapter}% + \fi\fi + \fi + % Check for numbered within unnumbered: + \ifnum \absseclevel > \unmlevel + \def\headtype{U}% + \else + \chardef\unmlevel = 3 + \fi + \fi + % Now print the heading: + \if \headtype U% + \ifcase\absseclevel + \unnumberedzzz{#3}% + \or \unnumberedseczzz{#3}% + \or \unnumberedsubseczzz{#3}% + \or \unnumberedsubsubseczzz{#3}% + \fi + \else + \if \headtype A% + \ifcase\absseclevel + \appendixzzz{#3}% + \or \appendixsectionzzz{#3}% + \or \appendixsubseczzz{#3}% + \or \appendixsubsubseczzz{#3}% + \fi + \else + \ifcase\absseclevel + \chapterzzz{#3}% + \or \seczzz{#3}% + \or \numberedsubseczzz{#3}% + \or \numberedsubsubseczzz{#3}% + \fi + \fi + \fi + \suppressfirstparagraphindent +} + +% an interface: +\def\numhead{\genhead N} +\def\apphead{\genhead A} +\def\unnmhead{\genhead U} + +% @chapter, @appendix, @unnumbered. Increment top-level counter, reset +% all lower-level sectioning counters to zero. +% +% Also set \chaplevelprefix, which we prepend to @float sequence numbers +% (e.g., figures), q.v. By default (before any chapter), that is empty. +\let\chaplevelprefix = \empty +% +\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz +\def\chapterzzz#1{% + % section resetting is \global in case the chapter is in a group, such + % as an @include file. + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\chapno by 1 + % + % Used for \float. + \gdef\chaplevelprefix{\the\chapno.}% + \resetallfloatnos + % + % \putwordChapter can contain complex things in translations. + \toks0=\expandafter{\putwordChapter}% + \message{\the\toks0 \space \the\chapno}% + % + % Write the actual heading. + \chapmacro{#1}{Ynumbered}{\the\chapno}% + % + % So @section and the like are numbered underneath this chapter. + \global\let\section = \numberedsec + \global\let\subsection = \numberedsubsec + \global\let\subsubsection = \numberedsubsubsec +} + +\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz +% +\def\appendixzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\appendixno by 1 + \gdef\chaplevelprefix{\appendixletter.}% + \resetallfloatnos + % + % \putwordAppendix can contain complex things in translations. + \toks0=\expandafter{\putwordAppendix}% + \message{\the\toks0 \space \appendixletter}% + % + \chapmacro{#1}{Yappendix}{\appendixletter}% + % + \global\let\section = \appendixsec + \global\let\subsection = \appendixsubsec + \global\let\subsubsection = \appendixsubsubsec +} + +\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz +\def\unnumberedzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\unnumberedno by 1 + % + % Since an unnumbered has no number, no prefix for figures. + \global\let\chaplevelprefix = \empty + \resetallfloatnos + % + % This used to be simply \message{#1}, but TeX fully expands the + % argument to \message. Therefore, if #1 contained @-commands, TeX + % expanded them. For example, in `@unnumbered The @cite{Book}', TeX + % expanded @cite (which turns out to cause errors because \cite is meant + % to be executed, not expanded). + % + % Anyway, we don't want the fully-expanded definition of @cite to appear + % as a result of the \message, we just want `@cite' itself. We use + % \the to achieve this: TeX expands \the only once, + % simply yielding the contents of . (We also do this for + % the toc entries.) + \toks0 = {#1}% + \message{(\the\toks0)}% + % + \chapmacro{#1}{Ynothing}{\the\unnumberedno}% + % + \global\let\section = \unnumberedsec + \global\let\subsection = \unnumberedsubsec + \global\let\subsubsection = \unnumberedsubsubsec +} + +% @centerchap is like @unnumbered, but the heading is centered. +\outer\parseargdef\centerchap{% + % Well, we could do the following in a group, but that would break + % an assumption that \chapmacro is called at the outermost level. + % Thus we are safer this way: --kasal, 24feb04 + \let\centerparametersmaybe = \centerparameters + \unnmhead0{#1}% + \let\centerparametersmaybe = \relax +} + +% @top is like @unnumbered. +\let\top\unnumbered + +% Sections. +\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz +\def\seczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% +} + +\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz +\def\appendixsectionzzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% +} +\let\appendixsec\appendixsection + +\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz +\def\unnumberedseczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% +} + +% Subsections. +\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz +\def\numberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% +} + +\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz +\def\appendixsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno}% +} + +\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz +\def\unnumberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno}% +} + +% Subsubsections. +\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz +\def\numberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynumbered}% + {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz +\def\appendixsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz +\def\unnumberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +% These macros control what the section commands do, according +% to what kind of chapter we are in (ordinary, appendix, or unnumbered). +% Define them by default for a numbered chapter. +\let\section = \numberedsec +\let\subsection = \numberedsubsec +\let\subsubsection = \numberedsubsubsec + +% Define @majorheading, @heading and @subheading + +% NOTE on use of \vbox for chapter headings, section headings, and such: +% 1) We use \vbox rather than the earlier \line to permit +% overlong headings to fold. +% 2) \hyphenpenalty is set to 10000 because hyphenation in a +% heading is obnoxious; this forbids it. +% 3) Likewise, headings look best if no \parindent is used, and +% if justification is not attempted. Hence \raggedright. + +\def\majorheading{% + {\advance\chapheadingskip by 10pt \chapbreak }% + \parsearg\chapheadingzzz +} + +\def\chapheading{\chapbreak \parsearg\chapheadingzzz} +\def\chapheadingzzz#1{% + {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\ptexraggedright + \rmisbold #1\hfill}}% + \bigskip \par\penalty 200\relax + \suppressfirstparagraphindent +} + +% @heading, @subheading, @subsubheading. +\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} + +% These macros generate a chapter, section, etc. heading only +% (including whitespace, linebreaking, etc. around it), +% given all the information in convenient, parsed form. + +%%% Args are the skip and penalty (usually negative) +\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} + +%%% Define plain chapter starts, and page on/off switching for it +% Parameter controlling skip before chapter headings (if needed) + +\newskip\chapheadingskip + +\def\chapbreak{\dobreak \chapheadingskip {-4000}} +\def\chappager{\par\vfill\supereject} +% Because \domark is called before \chapoddpage, the filler page will +% get the headings for the next chapter, which is wrong. But we don't +% care -- we just disable all headings on the filler page. +\def\chapoddpage{% + \chappager + \ifodd\pageno \else + \begingroup + \evenheadline={\hfil}\evenfootline={\hfil}% + \oddheadline={\hfil}\oddfootline={\hfil}% + \hbox to 0pt{}% + \chappager + \endgroup + \fi +} + +\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} + +\def\CHAPPAGoff{% +\global\let\contentsalignmacro = \chappager +\global\let\pchapsepmacro=\chapbreak +\global\let\pagealignmacro=\chappager} + +\def\CHAPPAGon{% +\global\let\contentsalignmacro = \chappager +\global\let\pchapsepmacro=\chappager +\global\let\pagealignmacro=\chappager +\global\def\HEADINGSon{\HEADINGSsingle}} + +\def\CHAPPAGodd{% +\global\let\contentsalignmacro = \chapoddpage +\global\let\pchapsepmacro=\chapoddpage +\global\let\pagealignmacro=\chapoddpage +\global\def\HEADINGSon{\HEADINGSdouble}} + +\CHAPPAGon + +% Chapter opening. +% +% #1 is the text, #2 is the section type (Ynumbered, Ynothing, +% Yappendix, Yomitfromtoc), #3 the chapter number. +% +% To test against our argument. +\def\Ynothingkeyword{Ynothing} +\def\Yomitfromtockeyword{Yomitfromtoc} +\def\Yappendixkeyword{Yappendix} +% +\def\chapmacro#1#2#3{% + % Insert the first mark before the heading break (see notes for \domark). + \let\prevchapterdefs=\lastchapterdefs + \let\prevsectiondefs=\lastsectiondefs + \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}% + \gdef\thissection{}}% + % + \def\temptype{#2}% + \ifx\temptype\Ynothingkeyword + \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\thischapter{\thischaptername}}% + \else\ifx\temptype\Yomitfromtockeyword + \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\thischapter{}}% + \else\ifx\temptype\Yappendixkeyword + \toks0={#1}% + \xdef\lastchapterdefs{% + \gdef\noexpand\thischaptername{\the\toks0}% + \gdef\noexpand\thischapternum{\appendixletter}% + % \noexpand\putwordAppendix avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordAppendix{} + \noexpand\thischapternum: + \noexpand\thischaptername}% + }% + \else + \toks0={#1}% + \xdef\lastchapterdefs{% + \gdef\noexpand\thischaptername{\the\toks0}% + \gdef\noexpand\thischapternum{\the\chapno}% + % \noexpand\putwordChapter avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordChapter{} + \noexpand\thischapternum: + \noexpand\thischaptername}% + }% + \fi\fi\fi + % + % Output the mark. Pass it through \safewhatsit, to take care of + % the preceding space. + \safewhatsit\domark + % + % Insert the chapter heading break. + \pchapsepmacro + % + % Now the second mark, after the heading break. No break points + % between here and the heading. + \let\prevchapterdefs=\lastchapterdefs + \let\prevsectiondefs=\lastsectiondefs + \domark + % + {% + \chapfonts \rmisbold + % + % Have to define \lastsection before calling \donoderef, because the + % xref code eventually uses it. On the other hand, it has to be called + % after \pchapsepmacro, or the headline will change too soon. + \gdef\lastsection{#1}% + % + % Only insert the separating space if we have a chapter/appendix + % number, and don't print the unnumbered ``number''. + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unnchap}% + \else\ifx\temptype\Yomitfromtockeyword + \setbox0 = \hbox{}% contents like unnumbered, but no toc entry + \def\toctype{omit}% + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% + \def\toctype{app}% + \else + \setbox0 = \hbox{#3\enspace}% + \def\toctype{numchap}% + \fi\fi\fi + % + % Write the toc entry for this chapter. Must come before the + % \donoderef, because we include the current node name in the toc + % entry, and \donoderef resets it to empty. + \writetocentry{\toctype}{#1}{#3}% + % + % For pdftex, we have to write out the node definition (aka, make + % the pdfdest) after any page break, but before the actual text has + % been typeset. If the destination for the pdf outline is after the + % text, then jumping from the outline may wind up with the text not + % being visible, for instance under high magnification. + \donoderef{#2}% + % + % Typeset the actual heading. + \nobreak % Avoid page breaks at the interline glue. + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright + \hangindent=\wd0 \centerparametersmaybe + \unhbox0 #1\par}% + }% + \nobreak\bigskip % no page break after a chapter title + \nobreak +} + +% @centerchap -- centered and unnumbered. +\let\centerparametersmaybe = \relax +\def\centerparameters{% + \advance\rightskip by 3\rightskip + \leftskip = \rightskip + \parfillskip = 0pt +} + + +% I don't think this chapter style is supported any more, so I'm not +% updating it with the new noderef stuff. We'll see. --karl, 11aug03. +% +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} +% +\def\unnchfopen #1{% +\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\ptexraggedright + \rmisbold #1\hfill}}\bigskip \par\nobreak +} +\def\chfopen #1#2{\chapoddpage {\chapfonts +\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% +\par\penalty 5000 % +} +\def\centerchfopen #1{% +\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt + \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak +} +\def\CHAPFopen{% + \global\let\chapmacro=\chfopen + \global\let\centerchapmacro=\centerchfopen} + + +% Section titles. These macros combine the section number parts and +% call the generic \sectionheading to do the printing. +% +\newskip\secheadingskip +\def\secheadingbreak{\dobreak \secheadingskip{-1000}} + +% Subsection titles. +\newskip\subsecheadingskip +\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}} + +% Subsubsection titles. +\def\subsubsecheadingskip{\subsecheadingskip} +\def\subsubsecheadingbreak{\subsecheadingbreak} + + +% Print any size, any type, section title. +% +% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is +% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the +% section number. +% +\def\seckeyword{sec} +% +\def\sectionheading#1#2#3#4{% + {% + % Switch to the right set of fonts. + \csname #2fonts\endcsname \rmisbold + % + \def\sectionlevel{#2}% + \def\temptype{#3}% + % + % Insert first mark before the heading break (see notes for \domark). + \let\prevsectiondefs=\lastsectiondefs + \ifx\temptype\Ynothingkeyword + \ifx\sectionlevel\seckeyword + \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}% + \gdef\thissection{\thissectionname}}% + \fi + \else\ifx\temptype\Yomitfromtockeyword + % Don't redefine \thissection. + \else\ifx\temptype\Yappendixkeyword + \ifx\sectionlevel\seckeyword + \toks0={#1}% + \xdef\lastsectiondefs{% + \gdef\noexpand\thissectionname{\the\toks0}% + \gdef\noexpand\thissectionnum{#4}% + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: + \noexpand\thissectionname}% + }% + \fi + \else + \ifx\sectionlevel\seckeyword + \toks0={#1}% + \xdef\lastsectiondefs{% + \gdef\noexpand\thissectionname{\the\toks0}% + \gdef\noexpand\thissectionnum{#4}% + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: + \noexpand\thissectionname}% + }% + \fi + \fi\fi\fi + % + % Go into vertical mode. Usually we'll already be there, but we + % don't want the following whatsit to end up in a preceding paragraph + % if the document didn't happen to have a blank line. + \par + % + % Output the mark. Pass it through \safewhatsit, to take care of + % the preceding space. + \safewhatsit\domark + % + % Insert space above the heading. + \csname #2headingbreak\endcsname + % + % Now the second mark, after the heading break. No break points + % between here and the heading. + \let\prevsectiondefs=\lastsectiondefs + \domark + % + % Only insert the space after the number if we have a section number. + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unn}% + \gdef\lastsection{#1}% + \else\ifx\temptype\Yomitfromtockeyword + % for @headings -- no section number, don't include in toc, + % and don't redefine \lastsection. + \setbox0 = \hbox{}% + \def\toctype{omit}% + \let\sectionlevel=\empty + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{#4\enspace}% + \def\toctype{app}% + \gdef\lastsection{#1}% + \else + \setbox0 = \hbox{#4\enspace}% + \def\toctype{num}% + \gdef\lastsection{#1}% + \fi\fi\fi + % + % Write the toc entry (before \donoderef). See comments in \chapmacro. + \writetocentry{\toctype\sectionlevel}{#1}{#4}% + % + % Write the node reference (= pdf destination for pdftex). + % Again, see comments in \chapmacro. + \donoderef{#3}% + % + % Interline glue will be inserted when the vbox is completed. + % That glue will be a valid breakpoint for the page, since it'll be + % preceded by a whatsit (usually from the \donoderef, or from the + % \writetocentry if there was no node). We don't want to allow that + % break, since then the whatsits could end up on page n while the + % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000. + \nobreak + % + % Output the actual section heading. + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright + \hangindent=\wd0 % zero if no section number + \unhbox0 #1}% + }% + % Add extra space after the heading -- half of whatever came above it. + % Don't allow stretch, though. + \kern .5 \csname #2headingskip\endcsname + % + % Do not let the kern be a potential breakpoint, as it would be if it + % was followed by glue. + \nobreak + % + % We'll almost certainly start a paragraph next, so don't let that + % glue accumulate. (Not a breakpoint because it's preceded by a + % discardable item.) + \vskip-\parskip + % + % This is purely so the last item on the list is a known \penalty > + % 10000. This is so \startdefun can avoid allowing breakpoints after + % section headings. Otherwise, it would insert a valid breakpoint between: + % + % @section sec-whatever + % @deffn def-whatever + \penalty 10001 +} + + +\message{toc,} +% Table of contents. +\newwrite\tocfile + +% Write an entry to the toc file, opening it if necessary. +% Called from @chapter, etc. +% +% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno} +% We append the current node name (if any) and page number as additional +% arguments for the \{chap,sec,...}entry macros which will eventually +% read this. The node name is used in the pdf outlines as the +% destination to jump to. +% +% We open the .toc file for writing here instead of at @setfilename (or +% any other fixed time) so that @contents can be anywhere in the document. +% But if #1 is `omit', then we don't do anything. This is used for the +% table of contents chapter openings themselves. +% +\newif\iftocfileopened +\def\omitkeyword{omit}% +% +\def\writetocentry#1#2#3{% + \edef\writetoctype{#1}% + \ifx\writetoctype\omitkeyword \else + \iftocfileopened\else + \immediate\openout\tocfile = \jobname.toc + \global\tocfileopenedtrue + \fi + % + \iflinks + {\atdummies + \edef\temp{% + \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}% + \temp + }% + \fi + \fi + % + % Tell \shipout to create a pdf destination on each page, if we're + % writing pdf. These are used in the table of contents. We can't + % just write one on every page because the title pages are numbered + % 1 and 2 (the page numbers aren't printed), and so are the first + % two pages of the document. Thus, we'd have two destinations named + % `1', and two named `2'. + \ifpdf \global\pdfmakepagedesttrue \fi +} + + +% These characters do not print properly in the Computer Modern roman +% fonts, so we must take special care. This is more or less redundant +% with the Texinfo input format setup at the end of this file. +% +\def\activecatcodes{% + \catcode`\"=\active + \catcode`\$=\active + \catcode`\<=\active + \catcode`\>=\active + \catcode`\\=\active + \catcode`\^=\active + \catcode`\_=\active + \catcode`\|=\active + \catcode`\~=\active +} + + +% Read the toc file, which is essentially Texinfo input. +\def\readtocfile{% + \setupdatafile + \activecatcodes + \input \tocreadfilename +} + +\newskip\contentsrightmargin \contentsrightmargin=1in +\newcount\savepageno +\newcount\lastnegativepageno \lastnegativepageno = -1 + +% Prepare to read what we've written to \tocfile. +% +\def\startcontents#1{% + % If @setchapternewpage on, and @headings double, the contents should + % start on an odd page, unlike chapters. Thus, we maintain + % \contentsalignmacro in parallel with \pagealignmacro. + % From: Torbjorn Granlund + \contentsalignmacro + \immediate\closeout\tocfile + % + % Don't need to put `Contents' or `Short Contents' in the headline. + % It is abundantly clear what they are. + \chapmacro{#1}{Yomitfromtoc}{}% + % + \savepageno = \pageno + \begingroup % Set up to handle contents files properly. + \raggedbottom % Worry more about breakpoints than the bottom. + \advance\hsize by -\contentsrightmargin % Don't use the full line length. + % + % Roman numerals for page numbers. + \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi +} + +% redefined for the two-volume lispref. We always output on +% \jobname.toc even if this is redefined. +% +\def\tocreadfilename{\jobname.toc} + +% Normal (long) toc. +% +\def\contents{% + \startcontents{\putwordTOC}% + \openin 1 \tocreadfilename\space + \ifeof 1 \else + \readtocfile + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \ifeof 1 \else + \pdfmakeoutlines + \fi + \closein 1 + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno +} + +% And just the chapters. +\def\summarycontents{% + \startcontents{\putwordShortTOC}% + % + \let\numchapentry = \shortchapentry + \let\appentry = \shortchapentry + \let\unnchapentry = \shortunnchapentry + % We want a true roman here for the page numbers. + \secfonts + \let\rm=\shortcontrm \let\bf=\shortcontbf + \let\sl=\shortcontsl \let\tt=\shortconttt + \rm + \hyphenpenalty = 10000 + \advance\baselineskip by 1pt % Open it up a little. + \def\numsecentry##1##2##3##4{} + \let\appsecentry = \numsecentry + \let\unnsecentry = \numsecentry + \let\numsubsecentry = \numsecentry + \let\appsubsecentry = \numsecentry + \let\unnsubsecentry = \numsecentry + \let\numsubsubsecentry = \numsecentry + \let\appsubsubsecentry = \numsecentry + \let\unnsubsubsecentry = \numsecentry + \openin 1 \tocreadfilename\space + \ifeof 1 \else + \readtocfile + \fi + \closein 1 + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno +} +\let\shortcontents = \summarycontents + +% Typeset the label for a chapter or appendix for the short contents. +% The arg is, e.g., `A' for an appendix, or `3' for a chapter. +% +\def\shortchaplabel#1{% + % This space should be enough, since a single number is .5em, and the + % widest letter (M) is 1em, at least in the Computer Modern fonts. + % But use \hss just in case. + % (This space doesn't include the extra space that gets added after + % the label; that gets put in by \shortchapentry above.) + % + % We'd like to right-justify chapter numbers, but that looks strange + % with appendix letters. And right-justifying numbers and + % left-justifying letters looks strange when there is less than 10 + % chapters. Have to read the whole toc once to know how many chapters + % there are before deciding ... + \hbox to 1em{#1\hss}% +} + +% These macros generate individual entries in the table of contents. +% The first argument is the chapter or section name. +% The last argument is the page number. +% The arguments in between are the chapter number, section number, ... + +% Chapters, in the main contents. +\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} +% +% Chapters, in the short toc. +% See comments in \dochapentry re vbox and related settings. +\def\shortchapentry#1#2#3#4{% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}% +} + +% Appendices, in the main contents. +% Need the word Appendix, and a fixed-size box. +% +\def\appendixbox#1{% + % We use M since it's probably the widest letter. + \setbox0 = \hbox{\putwordAppendix{} M}% + \hbox to \wd0{\putwordAppendix{} #1\hss}} +% +\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}} + +% Unnumbered chapters. +\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} +\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}} + +% Sections. +\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}} +\let\appsecentry=\numsecentry +\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}} + +% Subsections. +\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}} +\let\appsubsecentry=\numsubsecentry +\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} + +% And subsubsections. +\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}} +\let\appsubsubsecentry=\numsubsubsecentry +\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}} + +% This parameter controls the indentation of the various levels. +% Same as \defaultparindent. +\newdimen\tocindent \tocindent = 15pt + +% Now for the actual typesetting. In all these, #1 is the text and #2 is the +% page number. +% +% If the toc has to be broken over pages, we want it to be at chapters +% if at all possible; hence the \penalty. +\def\dochapentry#1#2{% + \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip + \begingroup + \chapentryfonts + \tocentry{#1}{\dopageno\bgroup#2\egroup}% + \endgroup + \nobreak\vskip .25\baselineskip plus.1\baselineskip +} + +\def\dosecentry#1#2{\begingroup + \secentryfonts \leftskip=\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +\def\dosubsecentry#1#2{\begingroup + \subsecentryfonts \leftskip=2\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +\def\dosubsubsecentry#1#2{\begingroup + \subsubsecentryfonts \leftskip=3\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +% We use the same \entry macro as for the index entries. +\let\tocentry = \entry + +% Space between chapter (or whatever) number and the title. +\def\labelspace{\hskip1em \relax} + +\def\dopageno#1{{\rm #1}} +\def\doshortpageno#1{{\rm #1}} + +\def\chapentryfonts{\secfonts \rm} +\def\secentryfonts{\textfonts} +\def\subsecentryfonts{\textfonts} +\def\subsubsecentryfonts{\textfonts} + + +\message{environments,} +% @foo ... @end foo. + +% @tex ... @end tex escapes into raw Tex temporarily. +% One exception: @ is still an escape character, so that @end tex works. +% But \@ or @@ will get a plain tex @ character. + +\envdef\tex{% + \setupmarkupstyle{tex}% + \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 + \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 + \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie + \catcode `\%=14 + \catcode `\+=\other + \catcode `\"=\other + \catcode `\|=\other + \catcode `\<=\other + \catcode `\>=\other + \catcode`\`=\other + \catcode`\'=\other + \escapechar=`\\ + % + \let\b=\ptexb + \let\bullet=\ptexbullet + \let\c=\ptexc + \let\,=\ptexcomma + \let\.=\ptexdot + \let\dots=\ptexdots + \let\equiv=\ptexequiv + \let\!=\ptexexclam + \let\i=\ptexi + \let\indent=\ptexindent + \let\noindent=\ptexnoindent + \let\{=\ptexlbrace + \let\+=\tabalign + \let\}=\ptexrbrace + \let\/=\ptexslash + \let\*=\ptexstar + \let\t=\ptext + \expandafter \let\csname top\endcsname=\ptextop % outer + \let\frenchspacing=\plainfrenchspacing + % + \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% + \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% + \def\@{@}% +} +% There is no need to define \Etex. + +% Define @lisp ... @end lisp. +% @lisp environment forms a group so it can rebind things, +% including the definition of @end lisp (which normally is erroneous). + +% Amount to narrow the margins by for @lisp. +\newskip\lispnarrowing \lispnarrowing=0.4in + +% This is the definition that ^^M gets inside @lisp, @example, and other +% such environments. \null is better than a space, since it doesn't +% have any width. +\def\lisppar{\null\endgraf} + +% This space is always present above and below environments. +\newskip\envskipamount \envskipamount = 0pt + +% Make spacing and below environment symmetrical. We use \parskip here +% to help in doing that, since in @example-like environments \parskip +% is reset to zero; thus the \afterenvbreak inserts no space -- but the +% start of the next paragraph will insert \parskip. +% +\def\aboveenvbreak{{% + % =10000 instead of <10000 because of a special case in \itemzzz and + % \sectionheading, q.v. + \ifnum \lastpenalty=10000 \else + \advance\envskipamount by \parskip + \endgraf + \ifdim\lastskip<\envskipamount + \removelastskip + % it's not a good place to break if the last penalty was \nobreak + % or better ... + \ifnum\lastpenalty<10000 \penalty-50 \fi + \vskip\envskipamount + \fi + \fi +}} + +\let\afterenvbreak = \aboveenvbreak + +% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will +% also clear it, so that its embedded environments do the narrowing again. +\let\nonarrowing=\relax + +% @cartouche ... @end cartouche: draw rectangle w/rounded corners around +% environment contents. +\font\circle=lcircle10 +\newdimen\circthick +\newdimen\cartouter\newdimen\cartinner +\newskip\normbskip\newskip\normpskip\newskip\normlskip +\circthick=\fontdimen8\circle +% +\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth +\def\ctr{{\hskip 6pt\circle\char'010}} +\def\cbl{{\circle\char'012\hskip -6pt}} +\def\cbr{{\hskip 6pt\circle\char'011}} +\def\carttop{\hbox to \cartouter{\hskip\lskip + \ctl\leaders\hrule height\circthick\hfil\ctr + \hskip\rskip}} +\def\cartbot{\hbox to \cartouter{\hskip\lskip + \cbl\leaders\hrule height\circthick\hfil\cbr + \hskip\rskip}} +% +\newskip\lskip\newskip\rskip + +\envdef\cartouche{% + \ifhmode\par\fi % can't be in the midst of a paragraph. + \startsavinginserts + \lskip=\leftskip \rskip=\rightskip + \leftskip=0pt\rightskip=0pt % we want these *outside*. + \cartinner=\hsize \advance\cartinner by-\lskip + \advance\cartinner by-\rskip + \cartouter=\hsize + \advance\cartouter by 18.4pt % allow for 3pt kerns on either + % side, and for 6pt waste from + % each corner char, and rule thickness + \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip + % Flag to tell @lisp, etc., not to narrow margin. + \let\nonarrowing = t% + \vbox\bgroup + \baselineskip=0pt\parskip=0pt\lineskip=0pt + \carttop + \hbox\bgroup + \hskip\lskip + \vrule\kern3pt + \vbox\bgroup + \kern3pt + \hsize=\cartinner + \baselineskip=\normbskip + \lineskip=\normlskip + \parskip=\normpskip + \vskip -\parskip + \comment % For explanation, see the end of \def\group. +} +\def\Ecartouche{% + \ifhmode\par\fi + \kern3pt + \egroup + \kern3pt\vrule + \hskip\rskip + \egroup + \cartbot + \egroup + \checkinserts +} + + +% This macro is called at the beginning of all the @example variants, +% inside a group. +\newdimen\nonfillparindent +\def\nonfillstart{% + \aboveenvbreak + \hfuzz = 12pt % Don't be fussy + \sepspaces % Make spaces be word-separators rather than space tokens. + \let\par = \lisppar % don't ignore blank lines + \obeylines % each line of input is a line of output + \parskip = 0pt + % Turn off paragraph indentation but redefine \indent to emulate + % the normal \indent. + \nonfillparindent=\parindent + \parindent = 0pt + \let\indent\nonfillindent + % + \emergencystretch = 0pt % don't try to avoid overfull boxes + \ifx\nonarrowing\relax + \advance \leftskip by \lispnarrowing + \exdentamount=\lispnarrowing + \else + \let\nonarrowing = \relax + \fi + \let\exdent=\nofillexdent +} + +\begingroup +\obeyspaces +% We want to swallow spaces (but not other tokens) after the fake +% @indent in our nonfill-environments, where spaces are normally +% active and set to @tie, resulting in them not being ignored after +% @indent. +\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}% +\gdef\nonfillindentcheck{% +\ifx\temp % +\expandafter\nonfillindentgobble% +\else% +\leavevmode\nonfillindentbox% +\fi% +}% +\endgroup +\def\nonfillindentgobble#1{\nonfillindent} +\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}} + +% If you want all examples etc. small: @set dispenvsize small. +% If you want even small examples the full size: @set dispenvsize nosmall. +% This affects the following displayed environments: +% @example, @display, @format, @lisp +% +\def\smallword{small} +\def\nosmallword{nosmall} +\let\SETdispenvsize\relax +\def\setnormaldispenv{% + \ifx\SETdispenvsize\smallword + % end paragraph for sake of leading, in case document has no blank + % line. This is redundant with what happens in \aboveenvbreak, but + % we need to do it before changing the fonts, and it's inconvenient + % to change the fonts afterward. + \ifnum \lastpenalty=10000 \else \endgraf \fi + \smallexamplefonts \rm + \fi +} +\def\setsmalldispenv{% + \ifx\SETdispenvsize\nosmallword + \else + \ifnum \lastpenalty=10000 \else \endgraf \fi + \smallexamplefonts \rm + \fi +} + +% We often define two environments, @foo and @smallfoo. +% Let's do it by one command: +\def\makedispenv #1#2{ + \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2} + \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2} + \expandafter\let\csname E#1\endcsname \afterenvbreak + \expandafter\let\csname Esmall#1\endcsname \afterenvbreak +} + +% Define two synonyms: +\def\maketwodispenvs #1#2#3{ + \makedispenv{#1}{#3} + \makedispenv{#2}{#3} +} + +% @lisp: indented, narrowed, typewriter font; @example: same as @lisp. +% +% @smallexample and @smalllisp: use smaller fonts. +% Originally contributed by Pavel@xerox. +% +\maketwodispenvs {lisp}{example}{% + \nonfillstart + \tt\setupmarkupstyle{example}% + \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. + \gobble % eat return +} +% @display/@smalldisplay: same as @lisp except keep current font. +% +\makedispenv {display}{% + \nonfillstart + \gobble +} + +% @format/@smallformat: same as @display except don't narrow margins. +% +\makedispenv{format}{% + \let\nonarrowing = t% + \nonfillstart + \gobble +} + +% @flushleft: same as @format, but doesn't obey \SETdispenvsize. +\envdef\flushleft{% + \let\nonarrowing = t% + \nonfillstart + \gobble +} +\let\Eflushleft = \afterenvbreak + +% @flushright. +% +\envdef\flushright{% + \let\nonarrowing = t% + \nonfillstart + \advance\leftskip by 0pt plus 1fill + \gobble +} +\let\Eflushright = \afterenvbreak + + +% @raggedright does more-or-less normal line breaking but no right +% justification. From plain.tex. +\envdef\raggedright{% + \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax +} +\let\Eraggedright\par + +\envdef\raggedleft{% + \parindent=0pt \leftskip0pt plus2em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedleft\par + +\envdef\raggedcenter{% + \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedcenter\par + + +% @quotation does normal linebreaking (hence we can't use \nonfillstart) +% and narrows the margins. We keep \parskip nonzero in general, since +% we're doing normal filling. So, when using \aboveenvbreak and +% \afterenvbreak, temporarily make \parskip 0. +% +\def\quotationstart{% + {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip + \parindent=0pt + % + % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \ifx\nonarrowing\relax + \advance\leftskip by \lispnarrowing + \advance\rightskip by \lispnarrowing + \exdentamount = \lispnarrowing + \else + \let\nonarrowing = \relax + \fi + \parsearg\quotationlabel +} + +\envdef\quotation{% + \setnormaldispenv + \quotationstart +} + +\envdef\smallquotation{% + \setsmalldispenv + \quotationstart +} +\let\Esmallquotation = \Equotation + +% We have retained a nonzero parskip for the environment, since we're +% doing normal filling. +% +\def\Equotation{% + \par + \ifx\quotationauthor\undefined\else + % indent a bit. + \leftline{\kern 2\leftskip \sl ---\quotationauthor}% + \fi + {\parskip=0pt \afterenvbreak}% +} + +% If we're given an argument, typeset it in bold with a colon after. +\def\quotationlabel#1{% + \def\temp{#1}% + \ifx\temp\empty \else + {\bf #1: }% + \fi +} + + +% LaTeX-like @verbatim...@end verbatim and @verb{...} +% If we want to allow any as delimiter, +% we need the curly braces so that makeinfo sees the @verb command, eg: +% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org +% +% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook. +% +% [Knuth] p.344; only we need to do the other characters Texinfo sets +% active too. Otherwise, they get lost as the first character on a +% verbatim line. +\def\dospecials{% + \do\ \do\\\do\{\do\}\do\$\do\&% + \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~% + \do\<\do\>\do\|\do\@\do+\do\"% + % Don't do the quotes -- if we do, @set txicodequoteundirected and + % @set txicodequotebacktick will not have effect on @verb and + % @verbatim, and ?` and !` ligatures won't get disabled. + %\do\`\do\'% +} +% +% [Knuth] p. 380 +\def\uncatcodespecials{% + \def\do##1{\catcode`##1=\other}\dospecials} +% +% Setup for the @verb command. +% +% Eight spaces for a tab +\begingroup + \catcode`\^^I=\active + \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }} +\endgroup +% +\def\setupverb{% + \tt % easiest (and conventionally used) font for verbatim + \def\par{\leavevmode\endgraf}% + \setupmarkupstyle{verb}% + \tabeightspaces + % Respect line breaks, + % print special symbols as themselves, and + % make each space count + % must do in this order: + \obeylines \uncatcodespecials \sepspaces +} + +% Setup for the @verbatim environment +% +% Real tab expansion +\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount +% +\def\starttabbox{\setbox0=\hbox\bgroup} +% +\begingroup + \catcode`\^^I=\active + \gdef\tabexpand{% + \catcode`\^^I=\active + \def^^I{\leavevmode\egroup + \dimen0=\wd0 % the width so far, or since the previous tab + \divide\dimen0 by\tabw + \multiply\dimen0 by\tabw % compute previous multiple of \tabw + \advance\dimen0 by\tabw % advance to next multiple of \tabw + \wd0=\dimen0 \box0 \starttabbox + }% + } +\endgroup + +% start the verbatim environment. +\def\setupverbatim{% + \let\nonarrowing = t% + \nonfillstart + % Easiest (and conventionally used) font for verbatim + \tt + \def\par{\leavevmode\egroup\box0\endgraf}% + \tabexpand + \setupmarkupstyle{verbatim}% + % Respect line breaks, + % print special symbols as themselves, and + % make each space count + % must do in this order: + \obeylines \uncatcodespecials \sepspaces + \everypar{\starttabbox}% +} + +% Do the @verb magic: verbatim text is quoted by unique +% delimiter characters. Before first delimiter expect a +% right brace, after last delimiter expect closing brace: +% +% \def\doverb'{'#1'}'{#1} +% +% [Knuth] p. 382; only eat outer {} +\begingroup + \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other + \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next] +\endgroup +% +\def\verb{\begingroup\setupverb\doverb} +% +% +% Do the @verbatim magic: define the macro \doverbatim so that +% the (first) argument ends when '@end verbatim' is reached, ie: +% +% \def\doverbatim#1@end verbatim{#1} +% +% For Texinfo it's a lot easier than for LaTeX, +% because texinfo's \verbatim doesn't stop at '\end{verbatim}': +% we need not redefine '\', '{' and '}'. +% +% Inspired by LaTeX's verbatim command set [latex.ltx] +% +\begingroup + \catcode`\ =\active + \obeylines % + % ignore everything up to the first ^^M, that's the newline at the end + % of the @verbatim input line itself. Otherwise we get an extra blank + % line in the output. + \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}% + % We really want {...\end verbatim} in the body of the macro, but + % without the active space; thus we have to use \xdef and \gobble. +\endgroup +% +\envdef\verbatim{% + \setupverbatim\doverbatim +} +\let\Everbatim = \afterenvbreak + + +% @verbatiminclude FILE - insert text of file in verbatim environment. +% +\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude} +% +\def\doverbatiminclude#1{% + {% + \makevalueexpandable + \setupverbatim + \indexnofonts % Allow `@@' and other weird things in file names. + \input #1 + \afterenvbreak + }% +} + +% @copying ... @end copying. +% Save the text away for @insertcopying later. +% +% We save the uninterpreted tokens, rather than creating a box. +% Saving the text in a box would be much easier, but then all the +% typesetting commands (@smallbook, font changes, etc.) have to be done +% beforehand -- and a) we want @copying to be done first in the source +% file; b) letting users define the frontmatter in as flexible order as +% possible is very desirable. +% +\def\copying{\checkenv{}\begingroup\scanargctxt\docopying} +\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}} +% +\def\insertcopying{% + \begingroup + \parindent = 0pt % paragraph indentation looks wrong on title page + \scanexp\copyingtext + \endgroup +} + + +\message{defuns,} +% @defun etc. + +\newskip\defbodyindent \defbodyindent=.4in +\newskip\defargsindent \defargsindent=50pt +\newskip\deflastargmargin \deflastargmargin=18pt +\newcount\defunpenalty + +% Start the processing of @deffn: +\def\startdefun{% + \ifnum\lastpenalty<10000 + \medbreak + \defunpenalty=10003 % Will keep this @deffn together with the + % following @def command, see below. + \else + % If there are two @def commands in a row, we'll have a \nobreak, + % which is there to keep the function description together with its + % header. But if there's nothing but headers, we need to allow a + % break somewhere. Check specifically for penalty 10002, inserted + % by \printdefunline, instead of 10000, since the sectioning + % commands also insert a nobreak penalty, and we don't want to allow + % a break between a section heading and a defun. + % + % As a minor refinement, we avoid "club" headers by signalling + % with penalty of 10003 after the very first @deffn in the + % sequence (see above), and penalty of 10002 after any following + % @def command. + \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi + % + % Similarly, after a section heading, do not allow a break. + % But do insert the glue. + \medskip % preceded by discardable penalty, so not a breakpoint + \fi + % + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent +} + +\def\dodefunx#1{% + % First, check whether we are in the right environment: + \checkenv#1% + % + % As above, allow line break if we have multiple x headers in a row. + % It's not a great place, though. + \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi + % + % And now, it's time to reuse the body of the original defun: + \expandafter\gobbledefun#1% +} +\def\gobbledefun#1\startdefun{} + +% \printdefunline \deffnheader{text} +% +\def\printdefunline#1#2{% + \begingroup + % call \deffnheader: + #1#2 \endheader + % common ending: + \interlinepenalty = 10000 + \advance\rightskip by 0pt plus 1fil + \endgraf + \nobreak\vskip -\parskip + \penalty\defunpenalty % signal to \startdefun and \dodefunx + % Some of the @defun-type tags do not enable magic parentheses, + % rendering the following check redundant. But we don't optimize. + \checkparencounts + \endgroup +} + +\def\Edefun{\endgraf\medbreak} + +% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; +% the only thing remaining is to define \deffnheader. +% +\def\makedefun#1{% + \expandafter\let\csname E#1\endcsname = \Edefun + \edef\temp{\noexpand\domakedefun + \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}% + \temp +} + +% \domakedefun \deffn \deffnx \deffnheader +% +% Define \deffn and \deffnx, without parameters. +% \deffnheader has to be defined explicitly. +% +\def\domakedefun#1#2#3{% + \envdef#1{% + \startdefun + \parseargusing\activeparens{\printdefunline#3}% + }% + \def#2{\dodefunx#1}% + \def#3% +} + +%%% Untyped functions: + +% @deffn category name args +\makedefun{deffn}{\deffngeneral{}} + +% @deffn category class name args +\makedefun{defop}#1 {\defopon{#1\ \putwordon}} + +% \defopon {category on}class name args +\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } + +% \deffngeneral {subind}category name args +% +\def\deffngeneral#1#2 #3 #4\endheader{% + % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}. + \dosubind{fn}{\code{#3}}{#1}% + \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% +} + +%%% Typed functions: + +% @deftypefn category type name args +\makedefun{deftypefn}{\deftypefngeneral{}} + +% @deftypeop category class type name args +\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}} + +% \deftypeopon {category on}class type name args +\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } + +% \deftypefngeneral {subind}category type name args +% +\def\deftypefngeneral#1#2 #3 #4 #5\endheader{% + \dosubind{fn}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +} + +%%% Typed variables: + +% @deftypevr category type var args +\makedefun{deftypevr}{\deftypecvgeneral{}} + +% @deftypecv category class type var args +\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}} + +% \deftypecvof {category of}class type var args +\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} } + +% \deftypecvgeneral {subind}category type var args +% +\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{% + \dosubind{vr}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +} + +%%% Untyped variables: + +% @defvr category var args +\makedefun{defvr}#1 {\deftypevrheader{#1} {} } + +% @defcv category class var args +\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}} + +% \defcvof {category of}class var args +\def\defcvof#1#2 {\deftypecvof{#1}#2 {} } + +%%% Type: +% @deftp category name args +\makedefun{deftp}#1 #2 #3\endheader{% + \doind{tp}{\code{#2}}% + \defname{#1}{}{#2}\defunargs{#3\unskip}% +} + +% Remaining @defun-like shortcuts: +\makedefun{defun}{\deffnheader{\putwordDeffunc} } +\makedefun{defmac}{\deffnheader{\putwordDefmac} } +\makedefun{defspec}{\deffnheader{\putwordDefspec} } +\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} } +\makedefun{defvar}{\defvrheader{\putwordDefvar} } +\makedefun{defopt}{\defvrheader{\putwordDefopt} } +\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} } +\makedefun{defmethod}{\defopon\putwordMethodon} +\makedefun{deftypemethod}{\deftypeopon\putwordMethodon} +\makedefun{defivar}{\defcvof\putwordInstanceVariableof} +\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof} + +% \defname, which formats the name of the @def (not the args). +% #1 is the category, such as "Function". +% #2 is the return type, if any. +% #3 is the function name. +% +% We are followed by (but not passed) the arguments, if any. +% +\def\defname#1#2#3{% + % Get the values of \leftskip and \rightskip as they were outside the @def... + \advance\leftskip by -\defbodyindent + % + % How we'll format the type name. Putting it in brackets helps + % distinguish it from the body text that may end up on the next line + % just below it. + \def\temp{#1}% + \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} + % + % Figure out line sizes for the paragraph shape. + % The first line needs space for \box0; but if \rightskip is nonzero, + % we need only space for the part of \box0 which exceeds it: + \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip + % The continuations: + \dimen2=\hsize \advance\dimen2 by -\defargsindent + % (plain.tex says that \dimen1 should be used only as global.) + \parshape 2 0in \dimen0 \defargsindent \dimen2 + % + % Put the type name to the right margin. + \noindent + \hbox to 0pt{% + \hfil\box0 \kern-\hsize + % \hsize has to be shortened this way: + \kern\leftskip + % Intentionally do not respect \rightskip, since we need the space. + }% + % + % Allow all lines to be underfull without complaint: + \tolerance=10000 \hbadness=10000 + \exdentamount=\defbodyindent + {% + % defun fonts. We use typewriter by default (used to be bold) because: + % . we're printing identifiers, they should be in tt in principle. + % . in languages with many accents, such as Czech or French, it's + % common to leave accents off identifiers. The result looks ok in + % tt, but exceedingly strange in rm. + % . we don't want -- and --- to be treated as ligatures. + % . this still does not fix the ?` and !` ligatures, but so far no + % one has made identifiers using them :). + \df \tt + \def\temp{#2}% return value type + \ifx\temp\empty\else \tclose{\temp} \fi + #3% output function name + }% + {\rm\enskip}% hskip 0.5 em of \tenrm + % + \boldbrax + % arguments will be output next, if any. +} + +% Print arguments in slanted roman (not ttsl), inconsistently with using +% tt for the name. This is because literal text is sometimes needed in +% the argument list (groff manual), and ttsl and tt are not very +% distinguishable. Prevent hyphenation at `-' chars. +% +\def\defunargs#1{% + % use sl by default (not ttsl), + % tt for the names. + \df \sl \hyphenchar\font=0 + % + % On the other hand, if an argument has two dashes (for instance), we + % want a way to get ttsl. Let's try @var for that. + \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% + #1% + \sl\hyphenchar\font=45 +} + +% We want ()&[] to print specially on the defun line. +% +\def\activeparens{% + \catcode`\(=\active \catcode`\)=\active + \catcode`\[=\active \catcode`\]=\active + \catcode`\&=\active +} + +% Make control sequences which act like normal parenthesis chars. +\let\lparen = ( \let\rparen = ) + +% Be sure that we always have a definition for `(', etc. For example, +% if the fn name has parens in it, \boldbrax will not be in effect yet, +% so TeX would otherwise complain about undefined control sequence. +{ + \activeparens + \global\let(=\lparen \global\let)=\rparen + \global\let[=\lbrack \global\let]=\rbrack + \global\let& = \& + + \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} + \gdef\magicamp{\let&=\amprm} +} + +\newcount\parencount + +% If we encounter &foo, then turn on ()-hacking afterwards +\newif\ifampseen +\def\amprm#1 {\ampseentrue{\bf\ }} + +\def\parenfont{% + \ifampseen + % At the first level, print parens in roman, + % otherwise use the default font. + \ifnum \parencount=1 \rm \fi + \else + % The \sf parens (in \boldbrax) actually are a little bolder than + % the contained text. This is especially needed for [ and ] . + \sf + \fi +} +\def\infirstlevel#1{% + \ifampseen + \ifnum\parencount=1 + #1% + \fi + \fi +} +\def\bfafterword#1 {#1 \bf} + +\def\opnr{% + \global\advance\parencount by 1 + {\parenfont(}% + \infirstlevel \bfafterword +} +\def\clnr{% + {\parenfont)}% + \infirstlevel \sl + \global\advance\parencount by -1 +} + +\newcount\brackcount +\def\lbrb{% + \global\advance\brackcount by 1 + {\bf[}% +} +\def\rbrb{% + {\bf]}% + \global\advance\brackcount by -1 +} + +\def\checkparencounts{% + \ifnum\parencount=0 \else \badparencount \fi + \ifnum\brackcount=0 \else \badbrackcount \fi +} +% these should not use \errmessage; the glibc manual, at least, actually +% has such constructs (when documenting function pointers). +\def\badparencount{% + \message{Warning: unbalanced parentheses in @def...}% + \global\parencount=0 +} +\def\badbrackcount{% + \message{Warning: unbalanced square brackets in @def...}% + \global\brackcount=0 +} + + +\message{macros,} +% @macro. + +% To do this right we need a feature of e-TeX, \scantokens, +% which we arrange to emulate with a temporary file in ordinary TeX. +\ifx\eTeXversion\undefined + \newwrite\macscribble + \def\scantokens#1{% + \toks0={#1}% + \immediate\openout\macscribble=\jobname.tmp + \immediate\write\macscribble{\the\toks0}% + \immediate\closeout\macscribble + \input \jobname.tmp + } +\fi + +\def\scanmacro#1{% + \begingroup + \newlinechar`\^^M + \let\xeatspaces\eatspaces + % Undo catcode changes of \startcontents and \doprintindex + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. Previously, we had + % \catcode`\\=\other instead. We'll see whether a problem appears + % with macro expansion. --kasal, 19aug04 + \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ + % ... and \example + \spaceisspace + % + % Append \endinput to make sure that TeX does not see the ending newline. + % I've verified that it is necessary both for e-TeX and for ordinary TeX + % --kasal, 29nov03 + \scantokens{#1\endinput}% + \endgroup +} + +\def\scanexp#1{% + \edef\temp{\noexpand\scanmacro{#1}}% + \temp +} + +\newcount\paramno % Count of parameters +\newtoks\macname % Macro name +\newif\ifrecursive % Is it recursive? + +% List of all defined macros in the form +% \definedummyword\macro1\definedummyword\macro2... +% Currently is also contains all @aliases; the list can be split +% if there is a need. +\def\macrolist{} + +% Add the macro to \macrolist +\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname} +\def\addtomacrolistxxx#1{% + \toks0 = \expandafter{\macrolist\definedummyword#1}% + \xdef\macrolist{\the\toks0}% +} + +% Utility routines. +% This does \let #1 = #2, with \csnames; that is, +% \let \csname#1\endcsname = \csname#2\endcsname +% (except of course we have to play expansion games). +% +\def\cslet#1#2{% + \expandafter\let + \csname#1\expandafter\endcsname + \csname#2\endcsname +} + +% Trim leading and trailing spaces off a string. +% Concepts from aro-bend problem 15 (see CTAN). +{\catcode`\@=11 +\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }} +\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@} +\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @} +\def\unbrace#1{#1} +\unbrace{\gdef\trim@@@ #1 } #2@{#1} +} + +% Trim a single trailing ^^M off a string. +{\catcode`\^^M=\other \catcode`\Q=3% +\gdef\eatcr #1{\eatcra #1Q^^MQ}% +\gdef\eatcra#1^^MQ{\eatcrb#1Q}% +\gdef\eatcrb#1Q#2Q{#1}% +} + +% Macro bodies are absorbed as an argument in a context where +% all characters are catcode 10, 11 or 12, except \ which is active +% (as in normal texinfo). It is necessary to change the definition of \. + +% Non-ASCII encodings make 8-bit characters active, so un-activate +% them to avoid their expansion. Must do this non-globally, to +% confine the change to the current group. + +% It's necessary to have hard CRs when the macro is executed. This is +% done by making ^^M (\endlinechar) catcode 12 when reading the macro +% body, and then making it the \newlinechar in \scanmacro. + +\def\scanctxt{% + \catcode`\"=\other + \catcode`\+=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\@=\other + \catcode`\^=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\~=\other + \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi +} + +\def\scanargctxt{% + \scanctxt + \catcode`\\=\other + \catcode`\^^M=\other +} + +\def\macrobodyctxt{% + \scanctxt + \catcode`\{=\other + \catcode`\}=\other + \catcode`\^^M=\other + \usembodybackslash +} + +\def\macroargctxt{% + \scanctxt + \catcode`\\=\other +} + +% \mbodybackslash is the definition of \ in @macro bodies. +% It maps \foo\ => \csname macarg.foo\endcsname => #N +% where N is the macro parameter number. +% We define \csname macarg.\endcsname to be \realbackslash, so +% \\ in macro replacement text gets you a backslash. + +{\catcode`@=0 @catcode`@\=@active + @gdef@usembodybackslash{@let\=@mbodybackslash} + @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} +} +\expandafter\def\csname macarg.\endcsname{\realbackslash} + +\def\macro{\recursivefalse\parsearg\macroxxx} +\def\rmacro{\recursivetrue\parsearg\macroxxx} + +\def\macroxxx#1{% + \getargs{#1}% now \macname is the macname and \argl the arglist + \ifx\argl\empty % no arguments + \paramno=0% + \else + \expandafter\parsemargdef \argl;% + \fi + \if1\csname ismacro.\the\macname\endcsname + \message{Warning: redefining \the\macname}% + \else + \expandafter\ifx\csname \the\macname\endcsname \relax + \else \errmessage{Macro name \the\macname\space already defined}\fi + \global\cslet{macsave.\the\macname}{\the\macname}% + \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% + \addtomacrolist{\the\macname}% + \fi + \begingroup \macrobodyctxt + \ifrecursive \expandafter\parsermacbody + \else \expandafter\parsemacbody + \fi} + +\parseargdef\unmacro{% + \if1\csname ismacro.#1\endcsname + \global\cslet{#1}{macsave.#1}% + \global\expandafter\let \csname ismacro.#1\endcsname=0% + % Remove the macro name from \macrolist: + \begingroup + \expandafter\let\csname#1\endcsname \relax + \let\definedummyword\unmacrodo + \xdef\macrolist{\macrolist}% + \endgroup + \else + \errmessage{Macro #1 not defined}% + \fi +} + +% Called by \do from \dounmacro on each macro. The idea is to omit any +% macro definitions that have been changed to \relax. +% +\def\unmacrodo#1{% + \ifx #1\relax + % remove this + \else + \noexpand\definedummyword \noexpand#1% + \fi +} + +% This makes use of the obscure feature that if the last token of a +% is #, then the preceding argument is delimited by +% an opening brace, and that opening brace is not consumed. +\def\getargs#1{\getargsxxx#1{}} +\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} +\def\getmacname #1 #2\relax{\macname={#1}} +\def\getmacargs#1{\def\argl{#1}} + +% Parse the optional {params} list. Set up \paramno and \paramlist +% so \defmacro knows what to do. Define \macarg.blah for each blah +% in the params list, to be ##N where N is the position in that list. +% That gets used by \mbodybackslash (above). + +% We need to get `macro parameter char #' into several definitions. +% The technique used is stolen from LaTeX: let \hash be something +% unexpandable, insert that wherever you need a #, and then redefine +% it to # just before using the token list produced. +% +% The same technique is used to protect \eatspaces till just before +% the macro is used. + +\def\parsemargdef#1;{\paramno=0\def\paramlist{}% + \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,} +\def\parsemargdefxxx#1,{% + \if#1;\let\next=\relax + \else \let\next=\parsemargdefxxx + \advance\paramno by 1% + \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname + {\xeatspaces{\hash\the\paramno}}% + \edef\paramlist{\paramlist\hash\the\paramno,}% + \fi\next} + +% These two commands read recursive and nonrecursive macro bodies. +% (They're different since rec and nonrec macros end differently.) + +\long\def\parsemacbody#1@end macro% +{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% +\long\def\parsermacbody#1@end rmacro% +{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% + +% This defines the macro itself. There are six cases: recursive and +% nonrecursive macros of zero, one, and many arguments. +% Much magic with \expandafter here. +% \xdef is used so that macro definitions will survive the file +% they're defined in; @include reads the file inside a group. +\def\defmacro{% + \let\hash=##% convert placeholders to macro parameter chars + \ifrecursive + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\scanmacro{\temp}}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname xxx\endcsname}% + \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup\noexpand\scanmacro{\temp}}% + \else % many + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{\egroup\noexpand\scanmacro{\temp}}% + \fi + \else + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname xxx\endcsname}% + \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \else % many + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \expandafter\noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \fi + \fi} + +\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} + +% \braceorline decides whether the next nonwhitespace character is a +% {. If so it reads up to the closing }, if not, it reads the whole +% line. Whatever was read is then fed to the next control sequence +% as an argument (by \parsebrace or \parsearg) +\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} +\def\braceorlinexxx{% + \ifx\nchar\bgroup\else + \expandafter\parsearg + \fi \macnamexxx} + + +% @alias. +% We need some trickery to remove the optional spaces around the equal +% sign. Just make them active and then expand them all to nothing. +\def\alias{\parseargusing\obeyspaces\aliasxxx} +\def\aliasxxx #1{\aliasyyy#1\relax} +\def\aliasyyy #1=#2\relax{% + {% + \expandafter\let\obeyedspace=\empty + \addtomacrolist{#1}% + \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% + }% + \next +} + + +\message{cross references,} + +\newwrite\auxfile +\newif\ifhavexrefs % True if xref values are known. +\newif\ifwarnedxrefs % True if we warned once that they aren't known. + +% @inforef is relatively simple. +\def\inforef #1{\inforefzzz #1,,,,**} +\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, + node \samp{\ignorespaces#1{}}} + +% @node's only job in TeX is to define \lastnode, which is used in +% cross-references. The @node line might or might not have commas, and +% might or might not have spaces before the first comma, like: +% @node foo , bar , ... +% We don't want such trailing spaces in the node name. +% +\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse} +% +% also remove a trailing comma, in case of something like this: +% @node Help-Cross, , , Cross-refs +\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse} +\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}} + +\let\nwnode=\node +\let\lastnode=\empty + +% Write a cross-reference definition for the current node. #1 is the +% type (Ynumbered, Yappendix, Ynothing). +% +\def\donoderef#1{% + \ifx\lastnode\empty\else + \setref{\lastnode}{#1}% + \global\let\lastnode=\empty + \fi +} + +% @anchor{NAME} -- define xref target at arbitrary point. +% +\newcount\savesfregister +% +\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} +\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} +\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} + +% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an +% anchor), which consists of three parts: +% 1) NAME-title - the current sectioning name taken from \lastsection, +% or the anchor name. +% 2) NAME-snt - section number and type, passed as the SNT arg, or +% empty for anchors. +% 3) NAME-pg - the page number. +% +% This is called from \donoderef, \anchor, and \dofloat. In the case of +% floats, there is an additional part, which is not written here: +% 4) NAME-lof - the text as it should appear in a @listoffloats. +% +\def\setref#1#2{% + \pdfmkdest{#1}% + \iflinks + {% + \atdummies % preserve commands, but don't expand them + \edef\writexrdef##1##2{% + \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef + ##1}{##2}}% these are parameters of \writexrdef + }% + \toks0 = \expandafter{\lastsection}% + \immediate \writexrdef{title}{\the\toks0 }% + \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. + \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout + }% + \fi +} + +% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is +% the node name, #2 the name of the Info cross-reference, #3 the printed +% node name, #4 the name of the Info file, #5 the name of the printed +% manual. All but the node name can be omitted. +% +\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} +\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} +\def\ref#1{\xrefX[#1,,,,,,,]} +\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup + \unsepspaces + \def\printedmanual{\ignorespaces #5}% + \def\printedrefname{\ignorespaces #3}% + \setbox1=\hbox{\printedmanual\unskip}% + \setbox0=\hbox{\printedrefname\unskip}% + \ifdim \wd0 = 0pt + % No printed node name was explicitly given. + \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax + % Use the node name inside the square brackets. + \def\printedrefname{\ignorespaces #1}% + \else + % Use the actual chapter/section title appear inside + % the square brackets. Use the real section title if we have it. + \ifdim \wd1 > 0pt + % It is in another manual, so we don't have it. + \def\printedrefname{\ignorespaces #1}% + \else + \ifhavexrefs + % We know the real title if we have the xref values. + \def\printedrefname{\refx{#1-title}{}}% + \else + % Otherwise just copy the Info node name. + \def\printedrefname{\ignorespaces #1}% + \fi% + \fi + \fi + \fi + % + % Make link in pdf output. + \ifpdf + {\indexnofonts + \turnoffactive + % This expands tokens, so do it after making catcode changes, so _ + % etc. don't get their TeX definitions. + \getfilename{#4}% + % + % See comments at \activebackslashdouble. + {\activebackslashdouble \xdef\pdfxrefdest{#1}% + \backslashparens\pdfxrefdest}% + % + \leavevmode + \startlink attr{/Border [0 0 0]}% + \ifnum\filenamelength>0 + goto file{\the\filename.pdf} name{\pdfxrefdest}% + \else + goto name{\pdfmkpgn{\pdfxrefdest}}% + \fi + }% + \setcolor{\linkcolor}% + \fi + % + % Float references are printed completely differently: "Figure 1.2" + % instead of "[somenode], p.3". We distinguish them by the + % LABEL-title being set to a magic string. + {% + % Have to otherify everything special to allow the \csname to + % include an _ in the xref name, etc. + \indexnofonts + \turnoffactive + \expandafter\global\expandafter\let\expandafter\Xthisreftitle + \csname XR#1-title\endcsname + }% + \iffloat\Xthisreftitle + % If the user specified the print name (third arg) to the ref, + % print it instead of our usual "Figure 1.2". + \ifdim\wd0 = 0pt + \refx{#1-snt}{}% + \else + \printedrefname + \fi + % + % if the user also gave the printed manual name (fifth arg), append + % "in MANUALNAME". + \ifdim \wd1 > 0pt + \space \putwordin{} \cite{\printedmanual}% + \fi + \else + % node/anchor (non-float) references. + % + % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not + % insert empty discretionaries after hyphens, which means that it will + % not find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, this + % is a loss. Therefore, we give the text of the node name again, so it + % is as if TeX is seeing it for the first time. + \ifdim \wd1 > 0pt + \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% + \else + % _ (for example) has to be the character _ for the purposes of the + % control sequence corresponding to the node, but it has to expand + % into the usual \leavevmode...\vrule stuff for purposes of + % printing. So we \turnoffactive for the \refx-snt, back on for the + % printing, back off for the \refx-pg. + {\turnoffactive + % Only output a following space if the -snt ref is nonempty; for + % @unnumbered and @anchor, it won't be. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi + }% + % output the `[mynode]' via a macro so it can be overridden. + \xrefprintnodename\printedrefname + % + % But we always want a comma and a space: + ,\space + % + % output the `page 3'. + \turnoffactive \putwordpage\tie\refx{#1-pg}{}% + \fi + \fi + \endlink +\endgroup} + +% This macro is called from \xrefX for the `[nodename]' part of xref +% output. It's a separate macro only so it can be changed more easily, +% since square brackets don't work well in some documents. Particularly +% one that Bob is working on :). +% +\def\xrefprintnodename#1{[#1]} + +% Things referred to by \setref. +% +\def\Ynothing{} +\def\Yomitfromtoc{} +\def\Ynumbered{% + \ifnum\secno=0 + \putwordChapter@tie \the\chapno + \else \ifnum\subsecno=0 + \putwordSection@tie \the\chapno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno + \else + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} +\def\Yappendix{% + \ifnum\secno=0 + \putwordAppendix@tie @char\the\appendixno{}% + \else \ifnum\subsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno + \else + \putwordSection@tie + @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} + +% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. +% If its value is nonempty, SUFFIX is output afterward. +% +\def\refx#1#2{% + {% + \indexnofonts + \otherbackslash + \expandafter\global\expandafter\let\expandafter\thisrefX + \csname XR#1\endcsname + }% + \ifx\thisrefX\relax + % If not defined, say something at least. + \angleleft un\-de\-fined\angleright + \iflinks + \ifhavexrefs + \message{\linenumber Undefined cross reference `#1'.}% + \else + \ifwarnedxrefs\else + \global\warnedxrefstrue + \message{Cross reference values unknown; you must run TeX again.}% + \fi + \fi + \fi + \else + % It's defined, so just use it. + \thisrefX + \fi + #2% Output the suffix in any case. +} + +% This is the macro invoked by entries in the aux file. Usually it's +% just a \def (we prepend XR to the control sequence name to avoid +% collisions). But if this is a float type, we have more work to do. +% +\def\xrdef#1#2{% + {% The node name might contain 8-bit characters, which in our current + % implementation are changed to commands like @'e. Don't let these + % mess up the control sequence name. + \indexnofonts + \turnoffactive + \xdef\safexrefname{#1}% + }% + % + \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref + % + % Was that xref control sequence that we just defined for a float? + \expandafter\iffloat\csname XR\safexrefname\endcsname + % it was a float, and we have the (safe) float type in \iffloattype. + \expandafter\let\expandafter\floatlist + \csname floatlist\iffloattype\endcsname + % + % Is this the first time we've seen this float type? + \expandafter\ifx\floatlist\relax + \toks0 = {\do}% yes, so just \do + \else + % had it before, so preserve previous elements in list. + \toks0 = \expandafter{\floatlist\do}% + \fi + % + % Remember this xref in the control sequence \floatlistFLOATTYPE, + % for later use in \listoffloats. + \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0 + {\safexrefname}}% + \fi +} + +% Read the last existing aux file, if any. No error if none exists. +% +\def\tryauxfile{% + \openin 1 \jobname.aux + \ifeof 1 \else + \readdatafile{aux}% + \global\havexrefstrue + \fi + \closein 1 +} + +\def\setupdatafile{% + \catcode`\^^@=\other + \catcode`\^^A=\other + \catcode`\^^B=\other + \catcode`\^^C=\other + \catcode`\^^D=\other + \catcode`\^^E=\other + \catcode`\^^F=\other + \catcode`\^^G=\other + \catcode`\^^H=\other + \catcode`\^^K=\other + \catcode`\^^L=\other + \catcode`\^^N=\other + \catcode`\^^P=\other + \catcode`\^^Q=\other + \catcode`\^^R=\other + \catcode`\^^S=\other + \catcode`\^^T=\other + \catcode`\^^U=\other + \catcode`\^^V=\other + \catcode`\^^W=\other + \catcode`\^^X=\other + \catcode`\^^Z=\other + \catcode`\^^[=\other + \catcode`\^^\=\other + \catcode`\^^]=\other + \catcode`\^^^=\other + \catcode`\^^_=\other + % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc. + % in xref tags, i.e., node names. But since ^^e4 notation isn't + % supported in the main text, it doesn't seem desirable. Furthermore, + % that is not enough: for node names that actually contain a ^ + % character, we would end up writing a line like this: 'xrdef {'hat + % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first + % argument, and \hat is not an expandable control sequence. It could + % all be worked out, but why? Either we support ^^ or we don't. + % + % The other change necessary for this was to define \auxhat: + % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter + % and then to call \auxhat in \setq. + % + \catcode`\^=\other + % + % Special characters. Should be turned off anyway, but... + \catcode`\~=\other + \catcode`\[=\other + \catcode`\]=\other + \catcode`\"=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\$=\other + \catcode`\#=\other + \catcode`\&=\other + \catcode`\%=\other + \catcode`+=\other % avoid \+ for paranoia even though we've turned it off + % + % This is to support \ in node names and titles, since the \ + % characters end up in a \csname. It's easier than + % leaving it active and making its active definition an actual \ + % character. What I don't understand is why it works in the *value* + % of the xrdef. Seems like it should be a catcode12 \, and that + % should not typeset properly. But it works, so I'm moving on for + % now. --karl, 15jan04. + \catcode`\\=\other + % + % Make the characters 128-255 be printing characters. + {% + \count1=128 + \def\loop{% + \catcode\count1=\other + \advance\count1 by 1 + \ifnum \count1<256 \loop \fi + }% + }% + % + % @ is our escape character in .aux files, and we need braces. + \catcode`\{=1 + \catcode`\}=2 + \catcode`\@=0 +} + +\def\readdatafile#1{% +\begingroup + \setupdatafile + \input\jobname.#1 +\endgroup} + + +\message{insertions,} +% including footnotes. + +\newcount \footnoteno + +% The trailing space in the following definition for supereject is +% vital for proper filling; pages come out unaligned when you do a +% pagealignmacro call if that space before the closing brace is +% removed. (Generally, numeric constants should always be followed by a +% space to prevent strange expansion errors.) +\def\supereject{\par\penalty -20000\footnoteno =0 } + +% @footnotestyle is meaningful for info output only. +\let\footnotestyle=\comment + +{\catcode `\@=11 +% +% Auto-number footnotes. Otherwise like plain. +\gdef\footnote{% + \let\indent=\ptexindent + \let\noindent=\ptexnoindent + \global\advance\footnoteno by \@ne + \edef\thisfootno{$^{\the\footnoteno}$}% + % + % In case the footnote comes at the end of a sentence, preserve the + % extra spacing after we do the footnote number. + \let\@sf\empty + \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi + % + % Remove inadvertent blank space before typesetting the footnote number. + \unskip + \thisfootno\@sf + \dofootnote +}% + +% Don't bother with the trickery in plain.tex to not require the +% footnote text as a parameter. Our footnotes don't need to be so general. +% +% Oh yes, they do; otherwise, @ifset (and anything else that uses +% \parseargline) fails inside footnotes because the tokens are fixed when +% the footnote is read. --karl, 16nov96. +% +\gdef\dofootnote{% + \insert\footins\bgroup + % We want to typeset this text as a normal paragraph, even if the + % footnote reference occurs in (for example) a display environment. + % So reset some parameters. + \hsize=\pagewidth + \interlinepenalty\interfootnotelinepenalty + \splittopskip\ht\strutbox % top baseline for broken footnotes + \splitmaxdepth\dp\strutbox + \floatingpenalty\@MM + \leftskip\z@skip + \rightskip\z@skip + \spaceskip\z@skip + \xspaceskip\z@skip + \parindent\defaultparindent + % + \smallfonts \rm + % + % Because we use hanging indentation in footnotes, a @noindent appears + % to exdent this text, so make it be a no-op. makeinfo does not use + % hanging indentation so @noindent can still be needed within footnote + % text after an @example or the like (not that this is good style). + \let\noindent = \relax + % + % Hang the footnote text off the number. Use \everypar in case the + % footnote extends for more than one paragraph. + \everypar = {\hang}% + \textindent{\thisfootno}% + % + % Don't crash into the line above the footnote text. Since this + % expands into a box, it must come within the paragraph, lest it + % provide a place where TeX can split the footnote. + \footstrut + \futurelet\next\fo@t +} +}%end \catcode `\@=11 + +% In case a @footnote appears in a vbox, save the footnote text and create +% the real \insert just after the vbox finished. Otherwise, the insertion +% would be lost. +% Similarly, if a @footnote appears inside an alignment, save the footnote +% text to a box and make the \insert when a row of the table is finished. +% And the same can be done for other insert classes. --kasal, 16nov03. + +% Replace the \insert primitive by a cheating macro. +% Deeper inside, just make sure that the saved insertions are not spilled +% out prematurely. +% +\def\startsavinginserts{% + \ifx \insert\ptexinsert + \let\insert\saveinsert + \else + \let\checkinserts\relax + \fi +} + +% This \insert replacement works for both \insert\footins{foo} and +% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}. +% +\def\saveinsert#1{% + \edef\next{\noexpand\savetobox \makeSAVEname#1}% + \afterassignment\next + % swallow the left brace + \let\temp = +} +\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}} +\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1} + +\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi} + +\def\placesaveins#1{% + \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname + {\box#1}% +} + +% eat @SAVE -- beware, all of them have catcode \other: +{ + \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-) + \gdef\gobblesave @SAVE{} +} + +% initialization: +\def\newsaveins #1{% + \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}% + \next +} +\def\newsaveinsX #1{% + \csname newbox\endcsname #1% + \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts + \checksaveins #1}% +} + +% initialize: +\let\checkinserts\empty +\newsaveins\footins +\newsaveins\margin + + +% @image. We use the macros from epsf.tex to support this. +% If epsf.tex is not installed and @image is used, we complain. +% +% Check for and read epsf.tex up front. If we read it only at @image +% time, we might be inside a group, and then its definitions would get +% undone and the next image would fail. +\openin 1 = epsf.tex +\ifeof 1 \else + % Do not bother showing banner with epsf.tex v2.7k (available in + % doc/epsf.tex and on ctan). + \def\epsfannounce{\toks0 = }% + \input epsf.tex +\fi +\closein 1 +% +% We will only complain once about lack of epsf.tex. +\newif\ifwarnednoepsf +\newhelp\noepsfhelp{epsf.tex must be installed for images to + work. It is also included in the Texinfo distribution, or you can get + it from ftp://tug.org/tex/epsf.tex.} +% +\def\image#1{% + \ifx\epsfbox\undefined + \ifwarnednoepsf \else + \errhelp = \noepsfhelp + \errmessage{epsf.tex not found, images will be ignored}% + \global\warnednoepsftrue + \fi + \else + \imagexxx #1,,,,,\finish + \fi +} +% +% Arguments to @image: +% #1 is (mandatory) image filename; we tack on .eps extension. +% #2 is (optional) width, #3 is (optional) height. +% #4 is (ignored optional) html alt text. +% #5 is (ignored optional) extension. +% #6 is just the usual extra ignored arg for parsing this stuff. +\newif\ifimagevmode +\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup + \catcode`\^^M = 5 % in case we're inside an example + \normalturnoffactive % allow _ et al. in names + % If the image is by itself, center it. + \ifvmode + \imagevmodetrue + \nobreak\medskip + % Usually we'll have text after the image which will insert + % \parskip glue, so insert it here too to equalize the space + % above and below. + \nobreak\vskip\parskip + \nobreak + \fi + % + % Leave vertical mode so that indentation from an enclosing + % environment such as @quotation is respected. On the other hand, if + % it's at the top level, we don't want the normal paragraph indentation. + \noindent + % + % Output the image. + \ifpdf + \dopdfimage{#1}{#2}{#3}% + \else + % \epsfbox itself resets \epsf?size at each figure. + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi + \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi + \epsfbox{#1.eps}% + \fi + % + \ifimagevmode \medskip \fi % space after the standalone image +\endgroup} + + +% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables, +% etc. We don't actually implement floating yet, we always include the +% float "here". But it seemed the best name for the future. +% +\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish} + +% There may be a space before second and/or third parameter; delete it. +\def\eatcommaspace#1, {#1,} + +% #1 is the optional FLOATTYPE, the text label for this float, typically +% "Figure", "Table", "Example", etc. Can't contain commas. If omitted, +% this float will not be numbered and cannot be referred to. +% +% #2 is the optional xref label. Also must be present for the float to +% be referable. +% +% #3 is the optional positioning argument; for now, it is ignored. It +% will somehow specify the positions allowed to float to (here, top, bottom). +% +% We keep a separate counter for each FLOATTYPE, which we reset at each +% chapter-level command. +\let\resetallfloatnos=\empty +% +\def\dofloat#1,#2,#3,#4\finish{% + \let\thiscaption=\empty + \let\thisshortcaption=\empty + % + % don't lose footnotes inside @float. + % + % BEWARE: when the floats start float, we have to issue warning whenever an + % insert appears inside a float which could possibly float. --kasal, 26may04 + % + \startsavinginserts + % + % We can't be used inside a paragraph. + \par + % + \vtop\bgroup + \def\floattype{#1}% + \def\floatlabel{#2}% + \def\floatloc{#3}% we do nothing with this yet. + % + \ifx\floattype\empty + \let\safefloattype=\empty + \else + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + \fi + % + % If label is given but no type, we handle that as the empty type. + \ifx\floatlabel\empty \else + % We want each FLOATTYPE to be numbered separately (Figure 1, + % Table 1, Figure 2, ...). (And if no label, no number.) + % + \expandafter\getfloatno\csname\safefloattype floatno\endcsname + \global\advance\floatno by 1 + % + {% + % This magic value for \lastsection is output by \setref as the + % XREFLABEL-title value. \xrefX uses it to distinguish float + % labels (which have a completely different output format) from + % node and anchor labels. And \xrdef uses it to construct the + % lists of floats. + % + \edef\lastsection{\floatmagic=\safefloattype}% + \setref{\floatlabel}{Yfloat}% + }% + \fi + % + % start with \parskip glue, I guess. + \vskip\parskip + % + % Don't suppress indentation if a float happens to start a section. + \restorefirstparagraphindent +} + +% we have these possibilities: +% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap +% @float Foo,lbl & no caption: Foo 1.1 +% @float Foo & @caption{Cap}: Foo: Cap +% @float Foo & no caption: Foo +% @float ,lbl & Caption{Cap}: 1.1: Cap +% @float ,lbl & no caption: 1.1 +% @float & @caption{Cap}: Cap +% @float & no caption: +% +\def\Efloat{% + \let\floatident = \empty + % + % In all cases, if we have a float type, it comes first. + \ifx\floattype\empty \else \def\floatident{\floattype}\fi + % + % If we have an xref label, the number comes next. + \ifx\floatlabel\empty \else + \ifx\floattype\empty \else % if also had float type, need tie first. + \appendtomacro\floatident{\tie}% + \fi + % the number. + \appendtomacro\floatident{\chaplevelprefix\the\floatno}% + \fi + % + % Start the printed caption with what we've constructed in + % \floatident, but keep it separate; we need \floatident again. + \let\captionline = \floatident + % + \ifx\thiscaption\empty \else + \ifx\floatident\empty \else + \appendtomacro\captionline{: }% had ident, so need a colon between + \fi + % + % caption text. + \appendtomacro\captionline{\scanexp\thiscaption}% + \fi + % + % If we have anything to print, print it, with space before. + % Eventually this needs to become an \insert. + \ifx\captionline\empty \else + \vskip.5\parskip + \captionline + % + % Space below caption. + \vskip\parskip + \fi + % + % If have an xref label, write the list of floats info. Do this + % after the caption, to avoid chance of it being a breakpoint. + \ifx\floatlabel\empty \else + % Write the text that goes in the lof to the aux file as + % \floatlabel-lof. Besides \floatident, we include the short + % caption if specified, else the full caption if specified, else nothing. + {% + \atdummies + % + % since we read the caption text in the macro world, where ^^M + % is turned into a normal character, we have to scan it back, so + % we don't write the literal three characters "^^M" into the aux file. + \scanexp{% + \xdef\noexpand\gtemp{% + \ifx\thisshortcaption\empty + \thiscaption + \else + \thisshortcaption + \fi + }% + }% + \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident + \ifx\gtemp\empty \else : \gtemp \fi}}% + }% + \fi + \egroup % end of \vtop + % + % place the captured inserts + % + % BEWARE: when the floats start floating, we have to issue warning + % whenever an insert appears inside a float which could possibly + % float. --kasal, 26may04 + % + \checkinserts +} + +% Append the tokens #2 to the definition of macro #1, not expanding either. +% +\def\appendtomacro#1#2{% + \expandafter\def\expandafter#1\expandafter{#1#2}% +} + +% @caption, @shortcaption +% +\def\caption{\docaption\thiscaption} +\def\shortcaption{\docaption\thisshortcaption} +\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption} +\def\defcaption#1#2{\egroup \def#1{#2}} + +% The parameter is the control sequence identifying the counter we are +% going to use. Create it if it doesn't exist and assign it to \floatno. +\def\getfloatno#1{% + \ifx#1\relax + % Haven't seen this figure type before. + \csname newcount\endcsname #1% + % + % Remember to reset this floatno at the next chap. + \expandafter\gdef\expandafter\resetallfloatnos + \expandafter{\resetallfloatnos #1=0 }% + \fi + \let\floatno#1% +} + +% \setref calls this to get the XREFLABEL-snt value. We want an @xref +% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we +% first read the @float command. +% +\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}% + +% Magic string used for the XREFLABEL-title value, so \xrefX can +% distinguish floats from other xref types. +\def\floatmagic{!!float!!} + +% #1 is the control sequence we are passed; we expand into a conditional +% which is true if #1 represents a float ref. That is, the magic +% \lastsection value which we \setref above. +% +\def\iffloat#1{\expandafter\doiffloat#1==\finish} +% +% #1 is (maybe) the \floatmagic string. If so, #2 will be the +% (safe) float type for this float. We set \iffloattype to #2. +% +\def\doiffloat#1=#2=#3\finish{% + \def\temp{#1}% + \def\iffloattype{#2}% + \ifx\temp\floatmagic +} + +% @listoffloats FLOATTYPE - print a list of floats like a table of contents. +% +\parseargdef\listoffloats{% + \def\floattype{#1}% floattype + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + % + % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE. + \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax + \ifhavexrefs + % if the user said @listoffloats foo but never @float foo. + \message{\linenumber No `\safefloattype' floats to list.}% + \fi + \else + \begingroup + \leftskip=\tocindent % indent these entries like a toc + \let\do=\listoffloatsdo + \csname floatlist\safefloattype\endcsname + \endgroup + \fi +} + +% This is called on each entry in a list of floats. We're passed the +% xref label, in the form LABEL-title, which is how we save it in the +% aux file. We strip off the -title and look up \XRLABEL-lof, which +% has the text we're supposed to typeset here. +% +% Figures without xref labels will not be included in the list (since +% they won't appear in the aux file). +% +\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish} +\def\listoffloatsdoentry#1-title\finish{{% + % Can't fully expand XR#1-lof because it can contain anything. Just + % pass the control sequence. On the other hand, XR#1-pg is just the + % page number, and we want to fully expand that so we can get a link + % in pdf output. + \toksA = \expandafter{\csname XR#1-lof\endcsname}% + % + % use the same \entry macro we use to generate the TOC and index. + \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}% + \writeentry +}} + + +\message{localization,} + +% For single-language documents, @documentlanguage is usually given very +% early, just after @documentencoding. Single argument is the language +% (de) or locale (de_DE) abbreviation. +% +{ + \catcode`\_ = \active + \globaldefs=1 +\parseargdef\documentlanguage{\begingroup + \let_=\normalunderscore % normal _ character for filenames + \tex % read txi-??.tex file in plain TeX. + % Read the file by the name they passed if it exists. + \openin 1 txi-#1.tex + \ifeof 1 + \documentlanguagetrywithoutunderscore{#1_\finish}% + \else + \globaldefs = 1 % everything in the txi-LL files needs to persist + \input txi-#1.tex + \fi + \closein 1 + \endgroup % end raw TeX +\endgroup} +% +% If they passed de_DE, and txi-de_DE.tex doesn't exist, +% try txi-de.tex. +% +\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{% + \openin 1 txi-#1.tex + \ifeof 1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \else + \globaldefs = 1 % everything in the txi-LL files needs to persist + \input txi-#1.tex + \fi + \closein 1 +} +}% end of special _ catcode +% +\newhelp\nolanghelp{The given language definition file cannot be found or +is empty. Maybe you need to install it? Putting it in the current +directory should work if nowhere else does.} + +% This macro is called from txi-??.tex files; the first argument is the +% \language name to set (without the "\lang@" prefix), the second and +% third args are \{left,right}hyphenmin. +% +% The language names to pass are determined when the format is built. +% See the etex.log file created at that time, e.g., +% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log. +% +% With TeX Live 2008, etex now includes hyphenation patterns for all +% available languages. This means we can support hyphenation in +% Texinfo, at least to some extent. (This still doesn't solve the +% accented characters problem.) +% +\catcode`@=11 +\def\txisetlanguage#1#2#3{% + % do not set the language if the name is undefined in the current TeX. + \expandafter\ifx\csname lang@#1\endcsname \relax + \message{no patterns for #1}% + \else + \global\language = \csname lang@#1\endcsname + \fi + % but there is no harm in adjusting the hyphenmin values regardless. + \global\lefthyphenmin = #2\relax + \global\righthyphenmin = #3\relax +} + +% Helpers for encodings. +% Set the catcode of characters 128 through 255 to the specified number. +% +\def\setnonasciicharscatcode#1{% + \count255=128 + \loop\ifnum\count255<256 + \global\catcode\count255=#1\relax + \advance\count255 by 1 + \repeat +} + +\def\setnonasciicharscatcodenonglobal#1{% + \count255=128 + \loop\ifnum\count255<256 + \catcode\count255=#1\relax + \advance\count255 by 1 + \repeat +} + +% @documentencoding sets the definition of non-ASCII characters +% according to the specified encoding. +% +\parseargdef\documentencoding{% + % Encoding being declared for the document. + \def\declaredencoding{\csname #1.enc\endcsname}% + % + % Supported encodings: names converted to tokens in order to be able + % to compare them with \ifx. + \def\ascii{\csname US-ASCII.enc\endcsname}% + \def\latnine{\csname ISO-8859-15.enc\endcsname}% + \def\latone{\csname ISO-8859-1.enc\endcsname}% + \def\lattwo{\csname ISO-8859-2.enc\endcsname}% + \def\utfeight{\csname UTF-8.enc\endcsname}% + % + \ifx \declaredencoding \ascii + \asciichardefs + % + \else \ifx \declaredencoding \lattwo + \setnonasciicharscatcode\active + \lattwochardefs + % + \else \ifx \declaredencoding \latone + \setnonasciicharscatcode\active + \latonechardefs + % + \else \ifx \declaredencoding \latnine + \setnonasciicharscatcode\active + \latninechardefs + % + \else \ifx \declaredencoding \utfeight + \setnonasciicharscatcode\active + \utfeightchardefs + % + \else + \message{Unknown document encoding #1, ignoring.}% + % + \fi % utfeight + \fi % latnine + \fi % latone + \fi % lattwo + \fi % ascii +} + +% A message to be logged when using a character that isn't available +% the default font encoding (OT1). +% +\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}} + +% Take account of \c (plain) vs. \, (Texinfo) difference. +\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi} + +% First, make active non-ASCII characters in order for them to be +% correctly categorized when TeX reads the replacement text of +% macros containing the character definitions. +\setnonasciicharscatcode\active +% +% Latin1 (ISO-8859-1) character definitions. +\def\latonechardefs{% + \gdef^^a0{~} + \gdef^^a1{\exclamdown} + \gdef^^a2{\missingcharmsg{CENT SIGN}} + \gdef^^a3{{\pounds}} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\missingcharmsg{YEN SIGN}} + \gdef^^a6{\missingcharmsg{BROKEN BAR}} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\copyright} + \gdef^^aa{\ordf} + \gdef^^ab{\guillemetleft} + \gdef^^ac{$\lnot$} + \gdef^^ad{\-} + \gdef^^ae{\registeredsymbol} + \gdef^^af{\={}} + % + \gdef^^b0{\textdegree} + \gdef^^b1{$\pm$} + \gdef^^b2{$^2$} + \gdef^^b3{$^3$} + \gdef^^b4{\'{}} + \gdef^^b5{$\mu$} + \gdef^^b6{\P} + % + \gdef^^b7{$^.$} + \gdef^^b8{\cedilla\ } + \gdef^^b9{$^1$} + \gdef^^ba{\ordm} + % + \gdef^^bb{\guilletright} + \gdef^^bc{$1\over4$} + \gdef^^bd{$1\over2$} + \gdef^^be{$3\over4$} + \gdef^^bf{\questiondown} + % + \gdef^^c0{\`A} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\~A} + \gdef^^c4{\"A} + \gdef^^c5{\ringaccent A} + \gdef^^c6{\AE} + \gdef^^c7{\cedilla C} + \gdef^^c8{\`E} + \gdef^^c9{\'E} + \gdef^^ca{\^E} + \gdef^^cb{\"E} + \gdef^^cc{\`I} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\"I} + % + \gdef^^d0{\DH} + \gdef^^d1{\~N} + \gdef^^d2{\`O} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\~O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\O} + \gdef^^d9{\`U} + \gdef^^da{\'U} + \gdef^^db{\^U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\TH} + \gdef^^df{\ss} + % + \gdef^^e0{\`a} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\~a} + \gdef^^e4{\"a} + \gdef^^e5{\ringaccent a} + \gdef^^e6{\ae} + \gdef^^e7{\cedilla c} + \gdef^^e8{\`e} + \gdef^^e9{\'e} + \gdef^^ea{\^e} + \gdef^^eb{\"e} + \gdef^^ec{\`{\dotless i}} + \gdef^^ed{\'{\dotless i}} + \gdef^^ee{\^{\dotless i}} + \gdef^^ef{\"{\dotless i}} + % + \gdef^^f0{\dh} + \gdef^^f1{\~n} + \gdef^^f2{\`o} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\~o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\o} + \gdef^^f9{\`u} + \gdef^^fa{\'u} + \gdef^^fb{\^u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\th} + \gdef^^ff{\"y} +} + +% Latin9 (ISO-8859-15) encoding character definitions. +\def\latninechardefs{% + % Encoding is almost identical to Latin1. + \latonechardefs + % + \gdef^^a4{\euro} + \gdef^^a6{\v S} + \gdef^^a8{\v s} + \gdef^^b4{\v Z} + \gdef^^b8{\v z} + \gdef^^bc{\OE} + \gdef^^bd{\oe} + \gdef^^be{\"Y} +} + +% Latin2 (ISO-8859-2) character definitions. +\def\lattwochardefs{% + \gdef^^a0{~} + \gdef^^a1{\ogonek{A}} + \gdef^^a2{\u{}} + \gdef^^a3{\L} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\v L} + \gdef^^a6{\'S} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\v S} + \gdef^^aa{\cedilla S} + \gdef^^ab{\v T} + \gdef^^ac{\'Z} + \gdef^^ad{\-} + \gdef^^ae{\v Z} + \gdef^^af{\dotaccent Z} + % + \gdef^^b0{\textdegree} + \gdef^^b1{\ogonek{a}} + \gdef^^b2{\ogonek{ }} + \gdef^^b3{\l} + \gdef^^b4{\'{}} + \gdef^^b5{\v l} + \gdef^^b6{\'s} + \gdef^^b7{\v{}} + \gdef^^b8{\cedilla\ } + \gdef^^b9{\v s} + \gdef^^ba{\cedilla s} + \gdef^^bb{\v t} + \gdef^^bc{\'z} + \gdef^^bd{\H{}} + \gdef^^be{\v z} + \gdef^^bf{\dotaccent z} + % + \gdef^^c0{\'R} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\u A} + \gdef^^c4{\"A} + \gdef^^c5{\'L} + \gdef^^c6{\'C} + \gdef^^c7{\cedilla C} + \gdef^^c8{\v C} + \gdef^^c9{\'E} + \gdef^^ca{\ogonek{E}} + \gdef^^cb{\"E} + \gdef^^cc{\v E} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\v D} + % + \gdef^^d0{\DH} + \gdef^^d1{\'N} + \gdef^^d2{\v N} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\H O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\v R} + \gdef^^d9{\ringaccent U} + \gdef^^da{\'U} + \gdef^^db{\H U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\cedilla T} + \gdef^^df{\ss} + % + \gdef^^e0{\'r} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\u a} + \gdef^^e4{\"a} + \gdef^^e5{\'l} + \gdef^^e6{\'c} + \gdef^^e7{\cedilla c} + \gdef^^e8{\v c} + \gdef^^e9{\'e} + \gdef^^ea{\ogonek{e}} + \gdef^^eb{\"e} + \gdef^^ec{\v e} + \gdef^^ed{\'\i} + \gdef^^ee{\^\i} + \gdef^^ef{\v d} + % + \gdef^^f0{\dh} + \gdef^^f1{\'n} + \gdef^^f2{\v n} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\H o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\v r} + \gdef^^f9{\ringaccent u} + \gdef^^fa{\'u} + \gdef^^fb{\H u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\cedilla t} + \gdef^^ff{\dotaccent{}} +} + +% UTF-8 character definitions. +% +% This code to support UTF-8 is based on LaTeX's utf8.def, with some +% changes for Texinfo conventions. It is included here under the GPL by +% permission from Frank Mittelbach and the LaTeX team. +% +\newcount\countUTFx +\newcount\countUTFy +\newcount\countUTFz + +\gdef\UTFviiiTwoOctets#1#2{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\endcsname} +% +\gdef\UTFviiiThreeOctets#1#2#3{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname} +% +\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname} + +\gdef\UTFviiiDefined#1{% + \ifx #1\relax + \message{\linenumber Unicode char \string #1 not defined for Texinfo}% + \else + \expandafter #1% + \fi +} + +\begingroup + \catcode`\~13 + \catcode`\"12 + + \def\UTFviiiLoop{% + \global\catcode\countUTFx\active + \uccode`\~\countUTFx + \uppercase\expandafter{\UTFviiiTmp}% + \advance\countUTFx by 1 + \ifnum\countUTFx < \countUTFy + \expandafter\UTFviiiLoop + \fi} + + \countUTFx = "C2 + \countUTFy = "E0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiTwoOctets\string~}} + \UTFviiiLoop + + \countUTFx = "E0 + \countUTFy = "F0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiThreeOctets\string~}} + \UTFviiiLoop + + \countUTFx = "F0 + \countUTFy = "F4 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiFourOctets\string~}} + \UTFviiiLoop +\endgroup + +\begingroup + \catcode`\"=12 + \catcode`\<=12 + \catcode`\.=12 + \catcode`\,=12 + \catcode`\;=12 + \catcode`\!=12 + \catcode`\~=13 + + \gdef\DeclareUnicodeCharacter#1#2{% + \countUTFz = "#1\relax + \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% + \begingroup + \parseXMLCharref + \def\UTFviiiTwoOctets##1##2{% + \csname u8:##1\string ##2\endcsname}% + \def\UTFviiiThreeOctets##1##2##3{% + \csname u8:##1\string ##2\string ##3\endcsname}% + \def\UTFviiiFourOctets##1##2##3##4{% + \csname u8:##1\string ##2\string ##3\string ##4\endcsname}% + \expandafter\expandafter\expandafter\expandafter + \expandafter\expandafter\expandafter + \gdef\UTFviiiTmp{#2}% + \endgroup} + + \gdef\parseXMLCharref{% + \ifnum\countUTFz < "A0\relax + \errhelp = \EMsimple + \errmessage{Cannot define Unicode char value < 00A0}% + \else\ifnum\countUTFz < "800\relax + \parseUTFviiiA,% + \parseUTFviiiB C\UTFviiiTwoOctets.,% + \else\ifnum\countUTFz < "10000\relax + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiB E\UTFviiiThreeOctets.{,;}% + \else + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiA!% + \parseUTFviiiB F\UTFviiiFourOctets.{!,;}% + \fi\fi\fi + } + + \gdef\parseUTFviiiA#1{% + \countUTFx = \countUTFz + \divide\countUTFz by 64 + \countUTFy = \countUTFz + \multiply\countUTFz by 64 + \advance\countUTFx by -\countUTFz + \advance\countUTFx by 128 + \uccode `#1\countUTFx + \countUTFz = \countUTFy} + + \gdef\parseUTFviiiB#1#2#3#4{% + \advance\countUTFz by "#10\relax + \uccode `#3\countUTFz + \uppercase{\gdef\UTFviiiTmp{#2#3#4}}} +\endgroup + +\def\utfeightchardefs{% + \DeclareUnicodeCharacter{00A0}{\tie} + \DeclareUnicodeCharacter{00A1}{\exclamdown} + \DeclareUnicodeCharacter{00A3}{\pounds} + \DeclareUnicodeCharacter{00A8}{\"{ }} + \DeclareUnicodeCharacter{00A9}{\copyright} + \DeclareUnicodeCharacter{00AA}{\ordf} + \DeclareUnicodeCharacter{00AB}{\guillemetleft} + \DeclareUnicodeCharacter{00AD}{\-} + \DeclareUnicodeCharacter{00AE}{\registeredsymbol} + \DeclareUnicodeCharacter{00AF}{\={ }} + + \DeclareUnicodeCharacter{00B0}{\ringaccent{ }} + \DeclareUnicodeCharacter{00B4}{\'{ }} + \DeclareUnicodeCharacter{00B8}{\cedilla{ }} + \DeclareUnicodeCharacter{00BA}{\ordm} + \DeclareUnicodeCharacter{00BB}{\guillemetright} + \DeclareUnicodeCharacter{00BF}{\questiondown} + + \DeclareUnicodeCharacter{00C0}{\`A} + \DeclareUnicodeCharacter{00C1}{\'A} + \DeclareUnicodeCharacter{00C2}{\^A} + \DeclareUnicodeCharacter{00C3}{\~A} + \DeclareUnicodeCharacter{00C4}{\"A} + \DeclareUnicodeCharacter{00C5}{\AA} + \DeclareUnicodeCharacter{00C6}{\AE} + \DeclareUnicodeCharacter{00C7}{\cedilla{C}} + \DeclareUnicodeCharacter{00C8}{\`E} + \DeclareUnicodeCharacter{00C9}{\'E} + \DeclareUnicodeCharacter{00CA}{\^E} + \DeclareUnicodeCharacter{00CB}{\"E} + \DeclareUnicodeCharacter{00CC}{\`I} + \DeclareUnicodeCharacter{00CD}{\'I} + \DeclareUnicodeCharacter{00CE}{\^I} + \DeclareUnicodeCharacter{00CF}{\"I} + + \DeclareUnicodeCharacter{00D0}{\DH} + \DeclareUnicodeCharacter{00D1}{\~N} + \DeclareUnicodeCharacter{00D2}{\`O} + \DeclareUnicodeCharacter{00D3}{\'O} + \DeclareUnicodeCharacter{00D4}{\^O} + \DeclareUnicodeCharacter{00D5}{\~O} + \DeclareUnicodeCharacter{00D6}{\"O} + \DeclareUnicodeCharacter{00D8}{\O} + \DeclareUnicodeCharacter{00D9}{\`U} + \DeclareUnicodeCharacter{00DA}{\'U} + \DeclareUnicodeCharacter{00DB}{\^U} + \DeclareUnicodeCharacter{00DC}{\"U} + \DeclareUnicodeCharacter{00DD}{\'Y} + \DeclareUnicodeCharacter{00DE}{\TH} + \DeclareUnicodeCharacter{00DF}{\ss} + + \DeclareUnicodeCharacter{00E0}{\`a} + \DeclareUnicodeCharacter{00E1}{\'a} + \DeclareUnicodeCharacter{00E2}{\^a} + \DeclareUnicodeCharacter{00E3}{\~a} + \DeclareUnicodeCharacter{00E4}{\"a} + \DeclareUnicodeCharacter{00E5}{\aa} + \DeclareUnicodeCharacter{00E6}{\ae} + \DeclareUnicodeCharacter{00E7}{\cedilla{c}} + \DeclareUnicodeCharacter{00E8}{\`e} + \DeclareUnicodeCharacter{00E9}{\'e} + \DeclareUnicodeCharacter{00EA}{\^e} + \DeclareUnicodeCharacter{00EB}{\"e} + \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}} + \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}} + \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}} + \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}} + + \DeclareUnicodeCharacter{00F0}{\dh} + \DeclareUnicodeCharacter{00F1}{\~n} + \DeclareUnicodeCharacter{00F2}{\`o} + \DeclareUnicodeCharacter{00F3}{\'o} + \DeclareUnicodeCharacter{00F4}{\^o} + \DeclareUnicodeCharacter{00F5}{\~o} + \DeclareUnicodeCharacter{00F6}{\"o} + \DeclareUnicodeCharacter{00F8}{\o} + \DeclareUnicodeCharacter{00F9}{\`u} + \DeclareUnicodeCharacter{00FA}{\'u} + \DeclareUnicodeCharacter{00FB}{\^u} + \DeclareUnicodeCharacter{00FC}{\"u} + \DeclareUnicodeCharacter{00FD}{\'y} + \DeclareUnicodeCharacter{00FE}{\th} + \DeclareUnicodeCharacter{00FF}{\"y} + + \DeclareUnicodeCharacter{0100}{\=A} + \DeclareUnicodeCharacter{0101}{\=a} + \DeclareUnicodeCharacter{0102}{\u{A}} + \DeclareUnicodeCharacter{0103}{\u{a}} + \DeclareUnicodeCharacter{0104}{\ogonek{A}} + \DeclareUnicodeCharacter{0105}{\ogonek{a}} + \DeclareUnicodeCharacter{0106}{\'C} + \DeclareUnicodeCharacter{0107}{\'c} + \DeclareUnicodeCharacter{0108}{\^C} + \DeclareUnicodeCharacter{0109}{\^c} + \DeclareUnicodeCharacter{0118}{\ogonek{E}} + \DeclareUnicodeCharacter{0119}{\ogonek{e}} + \DeclareUnicodeCharacter{010A}{\dotaccent{C}} + \DeclareUnicodeCharacter{010B}{\dotaccent{c}} + \DeclareUnicodeCharacter{010C}{\v{C}} + \DeclareUnicodeCharacter{010D}{\v{c}} + \DeclareUnicodeCharacter{010E}{\v{D}} + + \DeclareUnicodeCharacter{0112}{\=E} + \DeclareUnicodeCharacter{0113}{\=e} + \DeclareUnicodeCharacter{0114}{\u{E}} + \DeclareUnicodeCharacter{0115}{\u{e}} + \DeclareUnicodeCharacter{0116}{\dotaccent{E}} + \DeclareUnicodeCharacter{0117}{\dotaccent{e}} + \DeclareUnicodeCharacter{011A}{\v{E}} + \DeclareUnicodeCharacter{011B}{\v{e}} + \DeclareUnicodeCharacter{011C}{\^G} + \DeclareUnicodeCharacter{011D}{\^g} + \DeclareUnicodeCharacter{011E}{\u{G}} + \DeclareUnicodeCharacter{011F}{\u{g}} + + \DeclareUnicodeCharacter{0120}{\dotaccent{G}} + \DeclareUnicodeCharacter{0121}{\dotaccent{g}} + \DeclareUnicodeCharacter{0124}{\^H} + \DeclareUnicodeCharacter{0125}{\^h} + \DeclareUnicodeCharacter{0128}{\~I} + \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}} + \DeclareUnicodeCharacter{012A}{\=I} + \DeclareUnicodeCharacter{012B}{\={\dotless{i}}} + \DeclareUnicodeCharacter{012C}{\u{I}} + \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}} + + \DeclareUnicodeCharacter{0130}{\dotaccent{I}} + \DeclareUnicodeCharacter{0131}{\dotless{i}} + \DeclareUnicodeCharacter{0132}{IJ} + \DeclareUnicodeCharacter{0133}{ij} + \DeclareUnicodeCharacter{0134}{\^J} + \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}} + \DeclareUnicodeCharacter{0139}{\'L} + \DeclareUnicodeCharacter{013A}{\'l} + + \DeclareUnicodeCharacter{0141}{\L} + \DeclareUnicodeCharacter{0142}{\l} + \DeclareUnicodeCharacter{0143}{\'N} + \DeclareUnicodeCharacter{0144}{\'n} + \DeclareUnicodeCharacter{0147}{\v{N}} + \DeclareUnicodeCharacter{0148}{\v{n}} + \DeclareUnicodeCharacter{014C}{\=O} + \DeclareUnicodeCharacter{014D}{\=o} + \DeclareUnicodeCharacter{014E}{\u{O}} + \DeclareUnicodeCharacter{014F}{\u{o}} + + \DeclareUnicodeCharacter{0150}{\H{O}} + \DeclareUnicodeCharacter{0151}{\H{o}} + \DeclareUnicodeCharacter{0152}{\OE} + \DeclareUnicodeCharacter{0153}{\oe} + \DeclareUnicodeCharacter{0154}{\'R} + \DeclareUnicodeCharacter{0155}{\'r} + \DeclareUnicodeCharacter{0158}{\v{R}} + \DeclareUnicodeCharacter{0159}{\v{r}} + \DeclareUnicodeCharacter{015A}{\'S} + \DeclareUnicodeCharacter{015B}{\'s} + \DeclareUnicodeCharacter{015C}{\^S} + \DeclareUnicodeCharacter{015D}{\^s} + \DeclareUnicodeCharacter{015E}{\cedilla{S}} + \DeclareUnicodeCharacter{015F}{\cedilla{s}} + + \DeclareUnicodeCharacter{0160}{\v{S}} + \DeclareUnicodeCharacter{0161}{\v{s}} + \DeclareUnicodeCharacter{0162}{\cedilla{t}} + \DeclareUnicodeCharacter{0163}{\cedilla{T}} + \DeclareUnicodeCharacter{0164}{\v{T}} + + \DeclareUnicodeCharacter{0168}{\~U} + \DeclareUnicodeCharacter{0169}{\~u} + \DeclareUnicodeCharacter{016A}{\=U} + \DeclareUnicodeCharacter{016B}{\=u} + \DeclareUnicodeCharacter{016C}{\u{U}} + \DeclareUnicodeCharacter{016D}{\u{u}} + \DeclareUnicodeCharacter{016E}{\ringaccent{U}} + \DeclareUnicodeCharacter{016F}{\ringaccent{u}} + + \DeclareUnicodeCharacter{0170}{\H{U}} + \DeclareUnicodeCharacter{0171}{\H{u}} + \DeclareUnicodeCharacter{0174}{\^W} + \DeclareUnicodeCharacter{0175}{\^w} + \DeclareUnicodeCharacter{0176}{\^Y} + \DeclareUnicodeCharacter{0177}{\^y} + \DeclareUnicodeCharacter{0178}{\"Y} + \DeclareUnicodeCharacter{0179}{\'Z} + \DeclareUnicodeCharacter{017A}{\'z} + \DeclareUnicodeCharacter{017B}{\dotaccent{Z}} + \DeclareUnicodeCharacter{017C}{\dotaccent{z}} + \DeclareUnicodeCharacter{017D}{\v{Z}} + \DeclareUnicodeCharacter{017E}{\v{z}} + + \DeclareUnicodeCharacter{01C4}{D\v{Z}} + \DeclareUnicodeCharacter{01C5}{D\v{z}} + \DeclareUnicodeCharacter{01C6}{d\v{z}} + \DeclareUnicodeCharacter{01C7}{LJ} + \DeclareUnicodeCharacter{01C8}{Lj} + \DeclareUnicodeCharacter{01C9}{lj} + \DeclareUnicodeCharacter{01CA}{NJ} + \DeclareUnicodeCharacter{01CB}{Nj} + \DeclareUnicodeCharacter{01CC}{nj} + \DeclareUnicodeCharacter{01CD}{\v{A}} + \DeclareUnicodeCharacter{01CE}{\v{a}} + \DeclareUnicodeCharacter{01CF}{\v{I}} + + \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}} + \DeclareUnicodeCharacter{01D1}{\v{O}} + \DeclareUnicodeCharacter{01D2}{\v{o}} + \DeclareUnicodeCharacter{01D3}{\v{U}} + \DeclareUnicodeCharacter{01D4}{\v{u}} + + \DeclareUnicodeCharacter{01E2}{\={\AE}} + \DeclareUnicodeCharacter{01E3}{\={\ae}} + \DeclareUnicodeCharacter{01E6}{\v{G}} + \DeclareUnicodeCharacter{01E7}{\v{g}} + \DeclareUnicodeCharacter{01E8}{\v{K}} + \DeclareUnicodeCharacter{01E9}{\v{k}} + + \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}} + \DeclareUnicodeCharacter{01F1}{DZ} + \DeclareUnicodeCharacter{01F2}{Dz} + \DeclareUnicodeCharacter{01F3}{dz} + \DeclareUnicodeCharacter{01F4}{\'G} + \DeclareUnicodeCharacter{01F5}{\'g} + \DeclareUnicodeCharacter{01F8}{\`N} + \DeclareUnicodeCharacter{01F9}{\`n} + \DeclareUnicodeCharacter{01FC}{\'{\AE}} + \DeclareUnicodeCharacter{01FD}{\'{\ae}} + \DeclareUnicodeCharacter{01FE}{\'{\O}} + \DeclareUnicodeCharacter{01FF}{\'{\o}} + + \DeclareUnicodeCharacter{021E}{\v{H}} + \DeclareUnicodeCharacter{021F}{\v{h}} + + \DeclareUnicodeCharacter{0226}{\dotaccent{A}} + \DeclareUnicodeCharacter{0227}{\dotaccent{a}} + \DeclareUnicodeCharacter{0228}{\cedilla{E}} + \DeclareUnicodeCharacter{0229}{\cedilla{e}} + \DeclareUnicodeCharacter{022E}{\dotaccent{O}} + \DeclareUnicodeCharacter{022F}{\dotaccent{o}} + + \DeclareUnicodeCharacter{0232}{\=Y} + \DeclareUnicodeCharacter{0233}{\=y} + \DeclareUnicodeCharacter{0237}{\dotless{j}} + + \DeclareUnicodeCharacter{02DB}{\ogonek{ }} + + \DeclareUnicodeCharacter{1E02}{\dotaccent{B}} + \DeclareUnicodeCharacter{1E03}{\dotaccent{b}} + \DeclareUnicodeCharacter{1E04}{\udotaccent{B}} + \DeclareUnicodeCharacter{1E05}{\udotaccent{b}} + \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}} + \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}} + \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}} + \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}} + \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}} + \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}} + \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}} + \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}} + + \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}} + \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}} + + \DeclareUnicodeCharacter{1E20}{\=G} + \DeclareUnicodeCharacter{1E21}{\=g} + \DeclareUnicodeCharacter{1E22}{\dotaccent{H}} + \DeclareUnicodeCharacter{1E23}{\dotaccent{h}} + \DeclareUnicodeCharacter{1E24}{\udotaccent{H}} + \DeclareUnicodeCharacter{1E25}{\udotaccent{h}} + \DeclareUnicodeCharacter{1E26}{\"H} + \DeclareUnicodeCharacter{1E27}{\"h} + + \DeclareUnicodeCharacter{1E30}{\'K} + \DeclareUnicodeCharacter{1E31}{\'k} + \DeclareUnicodeCharacter{1E32}{\udotaccent{K}} + \DeclareUnicodeCharacter{1E33}{\udotaccent{k}} + \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}} + \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}} + \DeclareUnicodeCharacter{1E36}{\udotaccent{L}} + \DeclareUnicodeCharacter{1E37}{\udotaccent{l}} + \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}} + \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}} + \DeclareUnicodeCharacter{1E3E}{\'M} + \DeclareUnicodeCharacter{1E3F}{\'m} + + \DeclareUnicodeCharacter{1E40}{\dotaccent{M}} + \DeclareUnicodeCharacter{1E41}{\dotaccent{m}} + \DeclareUnicodeCharacter{1E42}{\udotaccent{M}} + \DeclareUnicodeCharacter{1E43}{\udotaccent{m}} + \DeclareUnicodeCharacter{1E44}{\dotaccent{N}} + \DeclareUnicodeCharacter{1E45}{\dotaccent{n}} + \DeclareUnicodeCharacter{1E46}{\udotaccent{N}} + \DeclareUnicodeCharacter{1E47}{\udotaccent{n}} + \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}} + \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}} + + \DeclareUnicodeCharacter{1E54}{\'P} + \DeclareUnicodeCharacter{1E55}{\'p} + \DeclareUnicodeCharacter{1E56}{\dotaccent{P}} + \DeclareUnicodeCharacter{1E57}{\dotaccent{p}} + \DeclareUnicodeCharacter{1E58}{\dotaccent{R}} + \DeclareUnicodeCharacter{1E59}{\dotaccent{r}} + \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}} + \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}} + \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}} + \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}} + + \DeclareUnicodeCharacter{1E60}{\dotaccent{S}} + \DeclareUnicodeCharacter{1E61}{\dotaccent{s}} + \DeclareUnicodeCharacter{1E62}{\udotaccent{S}} + \DeclareUnicodeCharacter{1E63}{\udotaccent{s}} + \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}} + \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}} + \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}} + \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}} + \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}} + \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}} + + \DeclareUnicodeCharacter{1E7C}{\~V} + \DeclareUnicodeCharacter{1E7D}{\~v} + \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}} + \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}} + + \DeclareUnicodeCharacter{1E80}{\`W} + \DeclareUnicodeCharacter{1E81}{\`w} + \DeclareUnicodeCharacter{1E82}{\'W} + \DeclareUnicodeCharacter{1E83}{\'w} + \DeclareUnicodeCharacter{1E84}{\"W} + \DeclareUnicodeCharacter{1E85}{\"w} + \DeclareUnicodeCharacter{1E86}{\dotaccent{W}} + \DeclareUnicodeCharacter{1E87}{\dotaccent{w}} + \DeclareUnicodeCharacter{1E88}{\udotaccent{W}} + \DeclareUnicodeCharacter{1E89}{\udotaccent{w}} + \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}} + \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}} + \DeclareUnicodeCharacter{1E8C}{\"X} + \DeclareUnicodeCharacter{1E8D}{\"x} + \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}} + \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}} + + \DeclareUnicodeCharacter{1E90}{\^Z} + \DeclareUnicodeCharacter{1E91}{\^z} + \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}} + \DeclareUnicodeCharacter{1E93}{\udotaccent{z}} + \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}} + \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}} + \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}} + \DeclareUnicodeCharacter{1E97}{\"t} + \DeclareUnicodeCharacter{1E98}{\ringaccent{w}} + \DeclareUnicodeCharacter{1E99}{\ringaccent{y}} + + \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}} + \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}} + + \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}} + \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}} + \DeclareUnicodeCharacter{1EBC}{\~E} + \DeclareUnicodeCharacter{1EBD}{\~e} + + \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}} + \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}} + \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}} + \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}} + + \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}} + \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}} + + \DeclareUnicodeCharacter{1EF2}{\`Y} + \DeclareUnicodeCharacter{1EF3}{\`y} + \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}} + + \DeclareUnicodeCharacter{1EF8}{\~Y} + \DeclareUnicodeCharacter{1EF9}{\~y} + + \DeclareUnicodeCharacter{2013}{--} + \DeclareUnicodeCharacter{2014}{---} + \DeclareUnicodeCharacter{2018}{\quoteleft} + \DeclareUnicodeCharacter{2019}{\quoteright} + \DeclareUnicodeCharacter{201A}{\quotesinglbase} + \DeclareUnicodeCharacter{201C}{\quotedblleft} + \DeclareUnicodeCharacter{201D}{\quotedblright} + \DeclareUnicodeCharacter{201E}{\quotedblbase} + \DeclareUnicodeCharacter{2022}{\bullet} + \DeclareUnicodeCharacter{2026}{\dots} + \DeclareUnicodeCharacter{2039}{\guilsinglleft} + \DeclareUnicodeCharacter{203A}{\guilsinglright} + \DeclareUnicodeCharacter{20AC}{\euro} + + \DeclareUnicodeCharacter{2192}{\expansion} + \DeclareUnicodeCharacter{21D2}{\result} + + \DeclareUnicodeCharacter{2212}{\minus} + \DeclareUnicodeCharacter{2217}{\point} + \DeclareUnicodeCharacter{2261}{\equiv} +}% end of \utfeightchardefs + + +% US-ASCII character definitions. +\def\asciichardefs{% nothing need be done + \relax +} + +% Make non-ASCII characters printable again for compatibility with +% existing Texinfo documents that may use them, even without declaring a +% document encoding. +% +\setnonasciicharscatcode \other + + +\message{formatting,} + +\newdimen\defaultparindent \defaultparindent = 15pt + +\chapheadingskip = 15pt plus 4pt minus 2pt +\secheadingskip = 12pt plus 3pt minus 2pt +\subsecheadingskip = 9pt plus 2pt minus 2pt + +% Prevent underfull vbox error messages. +\vbadness = 10000 + +% Don't be so finicky about underfull hboxes, either. +\hbadness = 2000 + +% Following George Bush, get rid of widows and orphans. +\widowpenalty=10000 +\clubpenalty=10000 + +% Use TeX 3.0's \emergencystretch to help line breaking, but if we're +% using an old version of TeX, don't do anything. We want the amount of +% stretch added to depend on the line length, hence the dependence on +% \hsize. We call this whenever the paper size is set. +% +\def\setemergencystretch{% + \ifx\emergencystretch\thisisundefined + % Allow us to assign to \emergencystretch anyway. + \def\emergencystretch{\dimen0}% + \else + \emergencystretch = .15\hsize + \fi +} + +% Parameters in order: 1) textheight; 2) textwidth; +% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip; +% 7) physical page height; 8) physical page width. +% +% We also call \setleading{\textleading}, so the caller should define +% \textleading. The caller should also set \parskip. +% +\def\internalpagesizes#1#2#3#4#5#6#7#8{% + \voffset = #3\relax + \topskip = #6\relax + \splittopskip = \topskip + % + \vsize = #1\relax + \advance\vsize by \topskip + \outervsize = \vsize + \advance\outervsize by 2\topandbottommargin + \pageheight = \vsize + % + \hsize = #2\relax + \outerhsize = \hsize + \advance\outerhsize by 0.5in + \pagewidth = \hsize + % + \normaloffset = #4\relax + \bindingoffset = #5\relax + % + \ifpdf + \pdfpageheight #7\relax + \pdfpagewidth #8\relax + % if we don't reset these, they will remain at "1 true in" of + % whatever layout pdftex was dumped with. + \pdfhorigin = 1 true in + \pdfvorigin = 1 true in + \fi + % + \setleading{\textleading} + % + \parindent = \defaultparindent + \setemergencystretch +} + +% @letterpaper (the default). +\def\letterpaper{{\globaldefs = 1 + \parskip = 3pt plus 2pt minus 1pt + \textleading = 13.2pt + % + % If page is nothing but text, make it come out even. + \internalpagesizes{607.2pt}{6in}% that's 46 lines + {\voffset}{.25in}% + {\bindingoffset}{36pt}% + {11in}{8.5in}% +}} + +% Use @smallbook to reset parameters for 7x9.25 trim size. +\def\smallbook{{\globaldefs = 1 + \parskip = 2pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.5in}{5in}% + {-.2in}{0in}% + {\bindingoffset}{16pt}% + {9.25in}{7in}% + % + \lispnarrowing = 0.3in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .5cm +}} + +% Use @smallerbook to reset parameters for 6x9 trim size. +% (Just testing, parameters still in flux.) +\def\smallerbook{{\globaldefs = 1 + \parskip = 1.5pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.4in}{4.8in}% + {-.2in}{-.4in}% + {0pt}{14pt}% + {9in}{6in}% + % + \lispnarrowing = 0.25in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .4cm +}} + +% Use @afourpaper to print on European A4 paper. +\def\afourpaper{{\globaldefs = 1 + \parskip = 3pt plus 2pt minus 1pt + \textleading = 13.2pt + % + % Double-side printing via postscript on Laserjet 4050 + % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm. + % To change the settings for a different printer or situation, adjust + % \normaloffset until the front-side and back-side texts align. Then + % do the same for \bindingoffset. You can set these for testing in + % your texinfo source file like this: + % @tex + % \global\normaloffset = -6mm + % \global\bindingoffset = 10mm + % @end tex + \internalpagesizes{673.2pt}{160mm}% that's 51 lines + {\voffset}{\hoffset}% + {\bindingoffset}{44pt}% + {297mm}{210mm}% + % + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = 5mm +}} + +% Use @afivepaper to print on European A5 paper. +% From romildo@urano.iceb.ufop.br, 2 July 2000. +% He also recommends making @example and @lisp be small. +\def\afivepaper{{\globaldefs = 1 + \parskip = 2pt plus 1pt minus 0.1pt + \textleading = 12.5pt + % + \internalpagesizes{160mm}{120mm}% + {\voffset}{\hoffset}% + {\bindingoffset}{8pt}% + {210mm}{148mm}% + % + \lispnarrowing = 0.2in + \tolerance = 800 + \hfuzz = 1.2pt + \contentsrightmargin = 0pt + \defbodyindent = 2mm + \tableindent = 12mm +}} + +% A specific text layout, 24x15cm overall, intended for A4 paper. +\def\afourlatex{{\globaldefs = 1 + \afourpaper + \internalpagesizes{237mm}{150mm}% + {\voffset}{4.6mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% + % + % Must explicitly reset to 0 because we call \afourpaper. + \globaldefs = 0 +}} + +% Use @afourwide to print on A4 paper in landscape format. +\def\afourwide{{\globaldefs = 1 + \afourpaper + \internalpagesizes{241mm}{165mm}% + {\voffset}{-2.95mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% + \globaldefs = 0 +}} + +% @pagesizes TEXTHEIGHT[,TEXTWIDTH] +% Perhaps we should allow setting the margins, \topskip, \parskip, +% and/or leading, also. Or perhaps we should compute them somehow. +% +\parseargdef\pagesizes{\pagesizesyyy #1,,\finish} +\def\pagesizesyyy#1,#2,#3\finish{{% + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi + \globaldefs = 1 + % + \parskip = 3pt plus 2pt minus 1pt + \setleading{\textleading}% + % + \dimen0 = #1\relax + \advance\dimen0 by \voffset + % + \dimen2 = \hsize + \advance\dimen2 by \normaloffset + % + \internalpagesizes{#1}{\hsize}% + {\voffset}{\normaloffset}% + {\bindingoffset}{44pt}% + {\dimen0}{\dimen2}% +}} + +% Set default to letter. +% +\letterpaper + + +\message{and turning on texinfo input format.} + +% DEL is a comment character, in case @c does not suffice. +\catcode`\^^? = 14 + +% Define macros to output various characters with catcode for normal text. +\catcode`\"=\other +\catcode`\~=\other +\catcode`\^=\other +\catcode`\_=\other +\catcode`\|=\other +\catcode`\<=\other +\catcode`\>=\other +\catcode`\+=\other +\catcode`\$=\other +\def\normaldoublequote{"} +\def\normaltilde{~} +\def\normalcaret{^} +\def\normalunderscore{_} +\def\normalverticalbar{|} +\def\normalless{<} +\def\normalgreater{>} +\def\normalplus{+} +\def\normaldollar{$}%$ font-lock fix + +% This macro is used to make a character print one way in \tt +% (where it can probably be output as-is), and another way in other fonts, +% where something hairier probably needs to be done. +% +% #1 is what to print if we are indeed using \tt; #2 is what to print +% otherwise. Since all the Computer Modern typewriter fonts have zero +% interword stretch (and shrink), and it is reasonable to expect all +% typewriter fonts to have this, we can check that font parameter. +% +\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi} + +% Same as above, but check for italic font. Actually this also catches +% non-italic slanted fonts since it is impossible to distinguish them from +% italic fonts. But since this is only used by $ and it uses \sl anyway +% this is not a problem. +\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi} + +% Turn off all special characters except @ +% (and those which the user can use as if they were ordinary). +% Most of these we simply print from the \tt font, but for some, we can +% use math or other variants that look better in normal text. + +\catcode`\"=\active +\def\activedoublequote{{\tt\char34}} +\let"=\activedoublequote +\catcode`\~=\active +\def~{{\tt\char126}} +\chardef\hat=`\^ +\catcode`\^=\active +\def^{{\tt \hat}} + +\catcode`\_=\active +\def_{\ifusingtt\normalunderscore\_} +\let\realunder=_ +% Subroutine for the previous macro. +\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em } + +\catcode`\|=\active +\def|{{\tt\char124}} +\chardef \less=`\< +\catcode`\<=\active +\def<{{\tt \less}} +\chardef \gtr=`\> +\catcode`\>=\active +\def>{{\tt \gtr}} +\catcode`\+=\active +\def+{{\tt \char 43}} +\catcode`\$=\active +\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix + +% If a .fmt file is being used, characters that might appear in a file +% name cannot be active until we have parsed the command line. +% So turn them off again, and have \everyjob (or @setfilename) turn them on. +% \otherifyactive is called near the end of this file. +\def\otherifyactive{\catcode`+=\other \catcode`\_=\other} + +% Used sometimes to turn off (effectively) the active characters even after +% parsing them. +\def\turnoffactive{% + \normalturnoffactive + \otherbackslash +} + +\catcode`\@=0 + +% \backslashcurfont outputs one backslash character in current font, +% as in \char`\\. +\global\chardef\backslashcurfont=`\\ +\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work + +% \realbackslash is an actual character `\' with catcode other, and +% \doublebackslash is two of them (for the pdf outlines). +{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}} + +% In texinfo, backslash is an active character; it prints the backslash +% in fixed width font. +\catcode`\\=\active +@def@normalbackslash{{@tt@backslashcurfont}} +% On startup, @fixbackslash assigns: +% @let \ = @normalbackslash + +% \rawbackslash defines an active \ to do \backslashcurfont. +% \otherbackslash defines an active \ to be a literal `\' character with +% catcode other. +@gdef@rawbackslash{@let\=@backslashcurfont} +@gdef@otherbackslash{@let\=@realbackslash} + +% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of +% the literal character `\'. +% +@def@normalturnoffactive{% + @let\=@normalbackslash + @let"=@normaldoublequote + @let~=@normaltilde + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let<=@normalless + @let>=@normalgreater + @let+=@normalplus + @let$=@normaldollar %$ font-lock fix + @markupsetuplqdefault + @markupsetuprqdefault + @unsepspaces +} + +% Make _ and + \other characters, temporarily. +% This is canceled by @fixbackslash. +@otherifyactive + +% If a .fmt file is being used, we don't want the `\input texinfo' to show up. +% That is what \eatinput is for; after that, the `\' should revert to printing +% a backslash. +% +@gdef@eatinput input texinfo{@fixbackslash} +@global@let\ = @eatinput + +% On the other hand, perhaps the file did not have a `\input texinfo'. Then +% the first `\' in the file would cause an error. This macro tries to fix +% that, assuming it is called before the first `\' could plausibly occur. +% Also turn back on active characters that might appear in the input +% file name, in case not using a pre-dumped format. +% +@gdef@fixbackslash{% + @ifx\@eatinput @let\ = @normalbackslash @fi + @catcode`+=@active + @catcode`@_=@active +} + +% Say @foo, not \foo, in error messages. +@escapechar = `@@ + +% These look ok in all fonts, so just make them not special. +@catcode`@& = @other +@catcode`@# = @other +@catcode`@% = @other + +@c Finally, make ` and ' active, so that txicodequoteundirected and +@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we +@c don't make ` and ' active, @code will not get them as active chars. +@c Do this last of all since we use ` in the previous @catcode assignments. +@catcode`@'=@active +@catcode`@`=@active +@markupsetuplqdefault +@markupsetuprqdefault + +@c Local variables: +@c eval: (add-hook 'write-file-hooks 'time-stamp) +@c page-delimiter: "^\\\\message" +@c time-stamp-start: "def\\\\texinfoversion{" +@c time-stamp-format: "%:y-%02m-%02d.%02H" +@c time-stamp-end: "}" +@c End: + +@c vim:sw=2: + +@ignore + arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 +@end ignore diff --git a/compat/Makefile.am b/compat/Makefile.am new file mode 100644 index 0000000..42554b6 --- /dev/null +++ b/compat/Makefile.am @@ -0,0 +1,54 @@ +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +# Flags +AM_CPPFLAGS=-I$(srcdir)/../src + +# The libraries +VI_CURRENT = 4 +VI_REVISION = 0 +VI_AGE = 0 + +lib_LTLIBRARIES = libgdbm_compat.la +libgdbm_compat_la_LIBADD = ../src/libgdbm.la + +include_HEADERS = dbm.h ndbm.h +noinst_HEADERS = dbm-priv.h + +DBM_CF=\ + dbminit.c\ + delete.c\ + fetch.c\ + store.c\ + seq.c\ + close.c + +NDBM_CF=\ + dbmopen.c\ + dbmdelete.c\ + dbmerr.c\ + dbmfetch.c\ + dbmstore.c\ + dbmseq.c\ + dbmclose.c\ + dbmdirfno.c\ + dbmpagfno.c\ + dbmrdonly.c + +libgdbm_compat_la_SOURCES = $(DBM_CF) $(NDBM_CF) + +libgdbm_compat_la_LDFLAGS = -version-info $(VI_CURRENT):$(VI_REVISION):$(VI_AGE) + diff --git a/compat/Makefile.in b/compat/Makefile.in new file mode 100644 index 0000000..4994e01 --- /dev/null +++ b/compat/Makefile.in @@ -0,0 +1,655 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = compat +DIST_COMMON = $(include_HEADERS) $(noinst_HEADERS) \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/autoconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libgdbm_compat_la_DEPENDENCIES = ../src/libgdbm.la +am__objects_1 = dbminit.lo delete.lo fetch.lo store.lo seq.lo close.lo +am__objects_2 = dbmopen.lo dbmdelete.lo dbmerr.lo dbmfetch.lo \ + dbmstore.lo dbmseq.lo dbmclose.lo dbmdirfno.lo dbmpagfno.lo \ + dbmrdonly.lo +am_libgdbm_compat_la_OBJECTS = $(am__objects_1) $(am__objects_2) +libgdbm_compat_la_OBJECTS = $(am_libgdbm_compat_la_OBJECTS) +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +libgdbm_compat_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ + $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ + $(AM_CFLAGS) $(CFLAGS) $(libgdbm_compat_la_LDFLAGS) $(LDFLAGS) \ + -o $@ +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(libgdbm_compat_la_SOURCES) +DIST_SOURCES = $(libgdbm_compat_la_SOURCES) +HEADERS = $(include_HEADERS) $(noinst_HEADERS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOM4TE = @AUTOM4TE@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GDBM183_INCLUDEDIR = @GDBM183_INCLUDEDIR@ +GDBM183_LIBDIR = @GDBM183_LIBDIR@ +GDBM183_LIBRARY = @GDBM183_LIBRARY@ +GDBM_VERSION_MAJOR = @GDBM_VERSION_MAJOR@ +GDBM_VERSION_MINOR = @GDBM_VERSION_MINOR@ +GDBM_VERSION_PATCH = @GDBM_VERSION_PATCH@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Flags +AM_CPPFLAGS = -I$(srcdir)/../src + +# The libraries +VI_CURRENT = 4 +VI_REVISION = 0 +VI_AGE = 0 +lib_LTLIBRARIES = libgdbm_compat.la +libgdbm_compat_la_LIBADD = ../src/libgdbm.la +include_HEADERS = dbm.h ndbm.h +noinst_HEADERS = dbm-priv.h +DBM_CF = \ + dbminit.c\ + delete.c\ + fetch.c\ + store.c\ + seq.c\ + close.c + +NDBM_CF = \ + dbmopen.c\ + dbmdelete.c\ + dbmerr.c\ + dbmfetch.c\ + dbmstore.c\ + dbmseq.c\ + dbmclose.c\ + dbmdirfno.c\ + dbmpagfno.c\ + dbmrdonly.c + +libgdbm_compat_la_SOURCES = $(DBM_CF) $(NDBM_CF) +libgdbm_compat_la_LDFLAGS = -version-info $(VI_CURRENT):$(VI_REVISION):$(VI_AGE) +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits compat/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnits compat/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +libgdbm_compat.la: $(libgdbm_compat_la_OBJECTS) $(libgdbm_compat_la_DEPENDENCIES) + $(AM_V_CCLD)$(libgdbm_compat_la_LINK) -rpath $(libdir) $(libgdbm_compat_la_OBJECTS) $(libgdbm_compat_la_LIBADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/close.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmclose.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmdelete.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmdirfno.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmerr.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmfetch.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbminit.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmopen.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmpagfno.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmrdonly.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmseq.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmstore.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/delete.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fetch.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/seq.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/store.Plo@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) + test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + done + +uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(includedir)" && rm -f $$files + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) $(HEADERS) +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-includeHEADERS + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libLTLIBRARIES clean-libtool ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-includeHEADERS install-info \ + install-info-am install-libLTLIBRARIES install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/compat/close.c b/compat/close.c new file mode 100644 index 0000000..2b368f9 --- /dev/null +++ b/compat/close.c @@ -0,0 +1,35 @@ +/* close.c - Close the "original" style database. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1993, 2007, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "dbm-priv.h" + +/* It's unclear whether dbmclose() is *always* a void function in old + C libraries. We use int, here. */ + +int +dbmclose () +{ + if (_gdbm_file != NULL) + { + dbm_close (_gdbm_file); + _gdbm_file = NULL; + } + return (0); +} diff --git a/compat/dbm-priv.h b/compat/dbm-priv.h new file mode 100644 index 0000000..f6cca3f --- /dev/null +++ b/compat/dbm-priv.h @@ -0,0 +1,22 @@ +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +#include "dbm.h" +#include "ndbm.h" +#include "gdbmdefs.h" + +extern DBM *_gdbm_file; diff --git a/compat/dbm.h b/compat/dbm.h new file mode 100644 index 0000000..f812950 --- /dev/null +++ b/compat/dbm.h @@ -0,0 +1,38 @@ +/* dbm.h - The include file for dbm users. */ + +/* This file is part of GDBM, the GNU data base manager, by Philip A. Nelson. + Copyright (C) 1990-2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . + + You may contact the author by: + e-mail: phil@cs.wwu.edu + us-mail: Philip A. Nelson + Computer Science Department + Western Washington University + Bellingham, WA 98226 + +*************************************************************************/ + +#include + +/* These are the routines in dbm. */ + +extern int dbminit (char *file); +extern datum fetch (datum key); +extern int store (datum key, datum content); +extern int delete (datum key); +extern datum firstkey (void); +extern datum nextkey (datum key); +extern int dbmclose (void); diff --git a/compat/dbmclose.c b/compat/dbmclose.c new file mode 100644 index 0000000..f7c88b3 --- /dev/null +++ b/compat/dbmclose.c @@ -0,0 +1,37 @@ +/* dbmclose.c - The the dbm file. This is the NDBM interface. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" +#include "gdbmdefs.h" + +/* Close the DBF file. */ + +void +dbm_close (DBM *dbm) +{ + gdbm_close (dbm->file); + close (dbm->dirfd); + if (dbm->_dbm_memory.dptr) + free (dbm->_dbm_memory.dptr); + if (dbm->_dbm_fetch_val) + free (dbm->_dbm_fetch_val); + free (dbm); +} diff --git a/compat/dbmdelete.c b/compat/dbmdelete.c new file mode 100644 index 0000000..22e6976 --- /dev/null +++ b/compat/dbmdelete.c @@ -0,0 +1,34 @@ +/* dbmdelete.c - Remove the key and its associated data from the database. + This is the NDBM unix interface name. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" + +/* Remove the KEYed item and the KEY from the database DBF. */ + +int +dbm_delete (DBM *dbm, datum key) +{ + int rc = gdbm_delete (dbm->file, key); + if (rc) + __gdbm_error_to_ndbm (dbm); + return rc; +} diff --git a/compat/dbmdirfno.c b/compat/dbmdirfno.c new file mode 100644 index 0000000..a586c7a --- /dev/null +++ b/compat/dbmdirfno.c @@ -0,0 +1,32 @@ +/* dbmdirfno.c - The .pag file number for NDBM interface. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" +#include "gdbmdefs.h" + +/* Return the file number of the DBF file. NDBM original wanted the .dir + file number. Since we have only one file number, we return it. */ + +int +dbm_dirfno (DBM *dbm) +{ + return dbm->dirfd; +} diff --git a/compat/dbmerr.c b/compat/dbmerr.c new file mode 100644 index 0000000..aab8f31 --- /dev/null +++ b/compat/dbmerr.c @@ -0,0 +1,32 @@ +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" +#include "gdbmdefs.h" + +int +dbm_error (DBM *dbf) +{ + return dbf->_dbm_errno; +} + +void +dbm_clearerr (DBM *dbf) +{ + dbf->_dbm_errno = 0; +} diff --git a/compat/dbmfetch.c b/compat/dbmfetch.c new file mode 100644 index 0000000..edc7430 --- /dev/null +++ b/compat/dbmfetch.c @@ -0,0 +1,43 @@ +/* dbmfetch.c - Find a key and return the associated data. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" +#include "gdbmdefs.h" + +/* NDBM Look up a given KEY and return the information associated with that + KEY. The pointer in the structure that is returned is a pointer to + dynamically allocated memory block. */ + +datum +dbm_fetch (DBM *dbm, datum key) +{ + datum ret_val; /* The return value. */ + + /* Free previous dynamic memory, do actual call, and save pointer to new + memory. */ + ret_val = gdbm_fetch (dbm->file, key); + if (dbm->_dbm_fetch_val != NULL) + free (dbm->_dbm_fetch_val); + dbm->_dbm_fetch_val = ret_val.dptr; + __gdbm_error_to_ndbm (dbm); + /* Return the new value. */ + return ret_val; +} diff --git a/compat/dbminit.c b/compat/dbminit.c new file mode 100644 index 0000000..94ddc22 --- /dev/null +++ b/compat/dbminit.c @@ -0,0 +1,56 @@ +/* dbminit.c - Open the file for dbm operations. This looks like the + DBM interface. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "dbm-priv.h" + +DBM *_gdbm_file; + +/* Initialize dbm system. FILE is a pointer to the file name. In + standard dbm, the database is found in files called FILE.pag and + FILE.dir. To make gdbm compatable with dbm using the dbminit call, + the same file names are used. Specifically, dbminit will use the file + name FILE.pag in its call to gdbm open. If the file (FILE.pag) has a + size of zero bytes, a file initialization procedure is performed, + setting up the initial structure in the file. Any error detected will + cause a return value of -1. No errors cause the return value of 0. + NOTE: file.dir will be linked to file.pag. */ + +int +dbminit (char *file) +{ + if (_gdbm_file != NULL) + dbm_close (_gdbm_file); + /* Try to open the file as a writer. DBM never created a file. */ + _gdbm_file = dbm_open (file, O_RDWR, 0644); + /* If it was not opened, try opening it as a reader. */ + if (_gdbm_file == NULL) + { + _gdbm_file = dbm_open (file, O_RDONLY, 0644); + /* Did we successfully open the file? */ + if (_gdbm_file == NULL) + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; + return -1; + } + } + return 0; +} diff --git a/compat/dbmopen.c b/compat/dbmopen.c new file mode 100644 index 0000000..7a5127e --- /dev/null +++ b/compat/dbmopen.c @@ -0,0 +1,279 @@ +/* dbmopen.c - Open the file for dbm operations. This looks like the + NDBM interface for dbm use. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" +#include "gdbmdefs.h" +#include +#include +#include + +#define DIRSUF ".dir" + +/* dir file structure: + + GDBM_DIR_MAGIC 4 bytes + GDBM_VERSION_MAJOR 4 bytes + GDBM_VERSION_MINOR 4 bytes + GDBM_VERSION_PATCH 4 bytes + + Total length: 16 bytes +*/ + +#define GDBM_DIR_MAGIC 0x4744424d /* GDBM */ +#define DEF_DIR_SIZE 16 + +static unsigned +getint (const unsigned char *cp) +{ + return (cp[0] << 24) + (cp[1] << 16) + (cp[2] << 8) + cp[3]; +} + +static void +putint (unsigned char *cp, unsigned n) +{ + cp[0] = (n >> 24) & 0xff; + cp[1] = (n >> 16) & 0xff; + cp[2] = (n >> 8) & 0xff; + cp[3] = n & 0xff; +} + +/* FIXME: revise return codes */ +static int +ndbm_open_dir_file0 (const char *file_name, int pagfd, int mode) +{ + int fd = -1; + struct stat st, pagst; + unsigned char dirbuf[DEF_DIR_SIZE]; + int flags = (mode & GDBM_OPENMASK) == GDBM_READER ? + O_RDONLY : O_RDWR; + + if (mode & GDBM_CLOEXEC) + flags |= O_CLOEXEC; + + if (fstat (pagfd, &pagst)) + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; /* FIXME: special code? */ + return -1; + } + + /* Previous versions of GDBM linked pag to dir. Try to detect this: */ + if (stat (file_name, &st) == 0) + { + if (st.st_nlink >= 2) + { + if (st.st_dev == pagst.st_dev && st.st_ino == pagst.st_ino) + { + if (unlink (file_name)) + { + if ((mode & GDBM_OPENMASK) == GDBM_READER) + /* Ok, try to cope with it. */ + return pagfd; + else + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; + return -1; + } + } + } + else + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; + return -1; + } + } + else if (st.st_size == 0) + /* ok */; + else if (st.st_size != DEF_DIR_SIZE) + { + gdbm_errno = GDBM_BAD_MAGIC_NUMBER; + return -1; + } + else + { + fd = open (file_name, flags); + if (fd == -1) + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; + return fd; + } + + if (read (fd, dirbuf, sizeof (dirbuf)) != sizeof (dirbuf)) + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; + close (fd); + return -1; + } + + if (getint (dirbuf) == GDBM_DIR_MAGIC) + { + int v[3]; + + v[0] = getint (dirbuf + 4); + v[1] = getint (dirbuf + 8); + v[2] = getint (dirbuf + 12); + + if (gdbm_version_cmp (v, gdbm_version_number) <= 0) + return fd; + } + close (fd); + gdbm_errno = GDBM_BAD_MAGIC_NUMBER; + return -1; + } + } + + /* File does not exist. Create it. */ + fd = open (file_name, flags | O_CREAT, pagst.st_mode & 0777); + if (fd >= 0) + { + putint (dirbuf, GDBM_DIR_MAGIC); + putint (dirbuf + 4, gdbm_version_number[0]); + putint (dirbuf + 8, gdbm_version_number[1]); + putint (dirbuf + 12, gdbm_version_number[2]); + + if (write (fd, dirbuf, sizeof (dirbuf)) != sizeof (dirbuf)) + { + gdbm_errno = GDBM_FILE_WRITE_ERROR; + close (fd); + fd = -1; + } + } + + return fd; +} + +static int +ndbm_open_dir_file (const char *base, int pagfd, int mode) +{ + char *file_name = malloc (strlen (base) + sizeof (DIRSUF)); + int fd; + + if (!file_name) + { + gdbm_errno = GDBM_MALLOC_ERROR; + return -1; + } + fd = ndbm_open_dir_file0 (strcat (strcpy (file_name, base), DIRSUF), + pagfd, mode); + free (file_name); + return fd; +} + +/* Initialize ndbm system. FILE is a pointer to the file name. In + standard dbm, the database is found in files called FILE.pag and + FILE.dir. To make gdbm compatable with dbm using the dbminit call, + the same file names are used. Specifically, dbminit will use the file + name FILE.pag in its call to gdbm open. If the file (FILE.pag) has a + size of zero bytes, a file initialization procedure is performed, + setting up the initial structure in the file. Any error detected will + cause a return value of -1. No errors cause the return value of 0. + + The file.dir file is used only to ensure that the corresponding file.pag + was created using a compatible version of GDBM. If file.dir is a hard + link to file.pag, as was in GDBM 1.8.x, it is removed and recreated in + the right format (see above). If the database is being opened read-only, + the file.dir remains untouched. + + FLAGS and MODE are the same as for the open(2) call. This call will + look at the FLAGS and decide what call to make to gdbm_open. For + FLAGS == O_RDONLY, it will be a GDBM_READER, if FLAGS == O_RDWR|O_CREAT, + it will be a GDBM_WRCREAT (creater and writer) and if the FLAGS == O_RDWR, + it will be a GDBM_WRITER and if FLAGS contain O_TRUNC then it will be + a GDBM_NEWDB. The O_CLOEXEC bit raises GDBM_CLOEXEC flag. + All other values of FLAGS are ignored. */ + +DBM * +dbm_open (char *file, int flags, int mode) +{ + char *pag_file; /* Used to construct "file.pag". */ + DBM *dbm = NULL; + int open_flags; + int f; + + /* Prepare the correct name for "file.pag". */ + pag_file = (char *) malloc (strlen (file) + 5); + if (!pag_file) + { + gdbm_errno = GDBM_MALLOC_ERROR; /* For the hell of it. */ + return NULL; + } + + strcpy (pag_file, file); + strcat (pag_file, ".pag"); + + /* Call the actual routine, saving the pointer to the file information. */ + f = flags & (O_RDONLY | O_RDWR | O_CREAT | O_TRUNC); + + if (f == O_RDONLY) + { + open_flags = GDBM_READER; + mode = 0; + } + else if (f == (O_RDWR | O_CREAT)) + { + open_flags = GDBM_WRCREAT; + } + else if ((f & O_TRUNC) == O_TRUNC) + { + open_flags = GDBM_NEWDB; + } + else + { + open_flags = GDBM_WRITER; + mode = 0; + } + + if (flags & O_CLOEXEC) + open_flags |= GDBM_CLOEXEC; + + open_flags |= GDBM_NOLOCK; + + dbm = calloc (1, sizeof (*dbm)); + if (!dbm) + { + free (pag_file); + gdbm_errno = GDBM_MALLOC_ERROR; /* For the hell of it. */ + return NULL; + } + + dbm->file = gdbm_open (pag_file, 0, open_flags, mode, NULL); + + /* Did we successfully open the file? */ + if (dbm->file == NULL) + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; + free (dbm); + dbm = NULL; + } + else + { + dbm->dirfd = ndbm_open_dir_file (file, dbm->file->desc, open_flags); + if (dbm->dirfd == -1) + { + gdbm_close (dbm->file); + free (dbm); + dbm = NULL; + } + } + + free (pag_file); + return dbm; +} diff --git a/compat/dbmpagfno.c b/compat/dbmpagfno.c new file mode 100644 index 0000000..6e07d39 --- /dev/null +++ b/compat/dbmpagfno.c @@ -0,0 +1,32 @@ +/* dbmpagfno.c - The .pag file number for NDBM interface. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" +#include "gdbmdefs.h" + +/* Return the file number of the DBF file. NDBM original wanted the .pag + file number. Since we have only one file number, we return it. */ + +int +dbm_pagfno (DBM *dbm) +{ + return dbm->file->desc; +} diff --git a/compat/dbmrdonly.c b/compat/dbmrdonly.c new file mode 100644 index 0000000..62e165f --- /dev/null +++ b/compat/dbmrdonly.c @@ -0,0 +1,30 @@ +/* dbmrdonly.c - Check to see if a database is read only, NDBM style. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1993, 2007, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" +#include "gdbmdefs.h" + +/* not much of a routine, but should be a function for compatibility. */ + +int +dbm_rdonly (DBM *dbm) +{ + return (dbm->file->read_write == GDBM_READER); +} diff --git a/compat/dbmseq.c b/compat/dbmseq.c new file mode 100644 index 0000000..57c8ab9 --- /dev/null +++ b/compat/dbmseq.c @@ -0,0 +1,68 @@ +/* dbmseq.c - Visit all elements in the database. This is the NDBM + interface. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" +#include "gdbmdefs.h" + +/* NDBM Start the visit of all keys in the database. This produces + something in hash order, not in any sorted order. DBF is the dbm file + information pointer. */ + +datum +dbm_firstkey (DBM *dbm) +{ + datum ret_val; + + /* Free previous dynamic memory, do actual call, and save pointer to new + memory. */ + ret_val = gdbm_firstkey (dbm->file); + if (dbm->_dbm_memory.dptr != NULL) + free (dbm->_dbm_memory.dptr); + dbm->_dbm_memory = ret_val; + __gdbm_error_to_ndbm (dbm); + /* Return the new value. */ + return ret_val; +} + + +/* NDBM Continue visiting all keys. The next key in the sequence is returned. + DBF is the file information pointer. */ + +datum +dbm_nextkey (DBM *dbm) +{ + datum ret_val; + + /* Make sure we have a valid key. */ + if (dbm->_dbm_memory.dptr == NULL) + return dbm->_dbm_memory; + + /* Call gdbm nextkey with the old value. After that, free the old value. */ + ret_val = gdbm_nextkey (dbm->file, dbm->_dbm_memory); + if (dbm->_dbm_memory.dptr != NULL) + free (dbm->_dbm_memory.dptr); + dbm->_dbm_memory = ret_val; + __gdbm_error_to_ndbm (dbm); + /* Return the new value. */ + return ret_val; +} + diff --git a/compat/dbmstore.c b/compat/dbmstore.c new file mode 100644 index 0000000..76c6232 --- /dev/null +++ b/compat/dbmstore.c @@ -0,0 +1,35 @@ +/* dbmstore.c - Add a new key/data pair to the database. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "ndbm.h" +#include "gdbmdefs.h" + +/* NDBM add a new element to the database. CONTENT is keyed by KEY. + The file on disk is updated to reflect the structure of the new + database before returning from this procedure. */ + +int +dbm_store (DBM *dbm, datum key, datum content, int flags) +{ + int rc = gdbm_store (dbm->file, key, content, flags); + __gdbm_error_to_ndbm (dbm); + return rc; +} diff --git a/compat/delete.c b/compat/delete.c new file mode 100644 index 0000000..a267dcc --- /dev/null +++ b/compat/delete.c @@ -0,0 +1,31 @@ +/* delete.c - Remove the key and its associated data from the database. + This is the original unix interface name. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "dbm-priv.h" + +/* Remove the KEYed item and the KEY from the database. */ + +int +delete (datum key) +{ + return dbm_delete (_gdbm_file, key); +} diff --git a/compat/fetch.c b/compat/fetch.c new file mode 100644 index 0000000..00d369e --- /dev/null +++ b/compat/fetch.c @@ -0,0 +1,32 @@ +/* fetch.c - Find a key and return the associated data. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "dbm-priv.h" + +/* Look up a given KEY and return the information associated with that KEY. + The pointer in the structure that is returned is a pointer to dynamically + allocated memory block. This DBM interface uses the NDBM interface. */ + +datum +fetch (datum key) +{ + return dbm_fetch (_gdbm_file, key); +} diff --git a/compat/ndbm.h b/compat/ndbm.h new file mode 100644 index 0000000..b19e61a --- /dev/null +++ b/compat/ndbm.h @@ -0,0 +1,66 @@ +/* ndbm.h - The include file for ndbm users. */ + +/* This file is part of GDBM, the GNU data base manager, by Philip A. Nelson. + Copyright (C) 1990-2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . + + You may contact the author by: + e-mail: phil@cs.wwu.edu + us-mail: Philip A. Nelson + Computer Science Department + Western Washington University + Bellingham, WA 98226 + +*************************************************************************/ + +#include + +/* Parameters to dbm_store for simple insertion or replacement. */ +#define DBM_INSERT GDBM_INSERT +#define DBM_REPLACE GDBM_REPLACE + +/* The file information header. */ +typedef struct +{ + GDBM_FILE file; /* Actual gdbm file (held in the .pag file */ + int dirfd; /* Descriptor of the .dir file */ + datum _dbm_memory; /* Keeps the last returned key */ + char *_dbm_fetch_val; /* Keeps the dptr of the last fetched datum */ + gdbm_error _dbm_errno; /* Error code from the last failed call */ +} DBM; + +/* Used internally by the library */ +#define __gdbm_error_to_ndbm(dbm) \ + do \ + { \ + if (gdbm_errno && gdbm_errno != GDBM_ITEM_NOT_FOUND) \ + (dbm)->_dbm_errno = gdbm_errno; \ + } \ + while (0) + +/* These are the routines */ + +extern DBM *dbm_open (char *file, int flags, int mode); +extern void dbm_close (DBM *dbf); +extern datum dbm_fetch (DBM *dbf, datum key); +extern int dbm_store (DBM *dbf, datum key, datum content, int flags); +extern int dbm_delete (DBM *dbf, datum key); +extern datum dbm_firstkey (DBM *dbf); +extern datum dbm_nextkey (DBM *dbf); +extern int dbm_error (DBM *dbf); +extern void dbm_clearerr (DBM *dbf); +extern int dbm_dirfno (DBM *dbf); +extern int dbm_pagfno (DBM *dbf); +extern int dbm_rdonly (DBM *dbf); diff --git a/compat/seq.c b/compat/seq.c new file mode 100644 index 0000000..e787f96 --- /dev/null +++ b/compat/seq.c @@ -0,0 +1,41 @@ +/* seq.c - This is the sequential visit of the database. This defines two + user-visable routines that are used together. This is the DBM interface. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "dbm-priv.h" + +/* Start the visit of all keys in the database. This produces something in + hash order, not in any sorted order. */ + +datum +firstkey (void) +{ + return dbm_firstkey (_gdbm_file); +} + + +/* Continue visiting all keys. The next key following KEY is returned. */ + +datum +nextkey (datum key) +{ + return dbm_nextkey (_gdbm_file); +} diff --git a/compat/store.c b/compat/store.c new file mode 100644 index 0000000..dd6ee78 --- /dev/null +++ b/compat/store.c @@ -0,0 +1,32 @@ +/* store.c - Add a new key/data pair to the database. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" +#include "dbm-priv.h" + +/* Add a new element to the database. CONTENT is keyed by KEY. The file on + disk is updated to reflect the structure of the new database before + returning from this procedure. */ + +int +store (datum key, datum content) +{ + return dbm_store (_gdbm_file, key, content, DBM_REPLACE); +} diff --git a/configure b/configure new file mode 100755 index 0000000..4336160 --- /dev/null +++ b/configure @@ -0,0 +1,18239 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.63 for gdbm 1.10. +# +# Report bugs to . +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } + +( + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" )) || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +( + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )) || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell bug-autoconf@gnu.org about your system, + echo including any error possibly output before this message. + echo This can help us improve future autoconf versions. + echo Configuration will now proceed without shell functions. +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +SHELL=${CONFIG_SHELL-/bin/sh} + + +exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Identity of this package. +PACKAGE_NAME='gdbm' +PACKAGE_TARNAME='gdbm' +PACKAGE_VERSION='1.10' +PACKAGE_STRING='gdbm 1.10' +PACKAGE_BUGREPORT='bug-gdbm@gnu.org' + +ac_unique_file="src/gdbmdefs.h" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +gt_needs= +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +AUTOM4TE +ENABLE_EXPORT_FALSE +ENABLE_EXPORT_TRUE +COMPAT_OPT_FALSE +COMPAT_OPT_TRUE +GDBM183_INCLUDEDIR +GDBM183_LIBDIR +GDBM183_LIBRARY +POSUB +LTLIBINTL +LIBINTL +INTLLIBS +LTLIBICONV +LIBICONV +INTL_MACOSX_LIBS +XGETTEXT_EXTRA_OPTIONS +MSGMERGE +XGETTEXT_015 +XGETTEXT +GMSGFMT_015 +MSGFMT_015 +GMSGFMT +MSGFMT +GETTEXT_MACRO_VERSION +USE_NLS +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +RANLIB +AR +OBJDUMP +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +EGREP +GREP +SED +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +LIBTOOL +CPP +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +GDBM_VERSION_PATCH +GDBM_VERSION_MINOR +GDBM_VERSION_MAJOR +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_memory_mapped_io +enable_libgdbm_compat +enable_gdbm_export +with_gdbm183_library +with_gdbm183_libdir +with_gdbm183_includedir +enable_dependency_tracking +enable_shared +enable_static +with_pic +enable_fast_install +with_gnu_ld +enable_libtool_lock +enable_largefile +enable_nls +enable_rpath +with_libiconv_prefix +with_libintl_prefix +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { $as_echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { $as_echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 + { (exit 1); exit 1; }; } ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { $as_echo "$as_me: error: working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures gdbm 1.10 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/gdbm] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of gdbm 1.10:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: `make V=1') + --disable-silent-rules verbose build output (undo: `make V=0') + --enable-memory-mapped-io + Use mmap(2) for disk I/O. (Default is YES.) + + --enable-libgdbm-compat + Build and install libgdbm_compat. (Default is NO.) + + --enable-gdbm-export Build and install gdbmexport with specified gdbm 1.8 + library. (Default is NO.) + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --disable-largefile omit support for large files + --disable-nls do not use Native Language Support + --disable-rpath do not hardcode runtime library paths + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-gdbm183-library Build gdbmexport with specified (static) library. + --with-gdbm183-libdir Build gdbmexport with the gdbm library in the + specified directory. + --with-gdbm183-includedir + Build gdbmexport with gdbm.h in the specified + directory. + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-gnu-ld assume the C compiler uses GNU ld default=no + --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib + --without-libiconv-prefix don't search for libiconv in includedir and libdir + --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib + --without-libintl-prefix don't search for libintl in includedir and libdir + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +gdbm configure 1.10 +generated by GNU Autoconf 2.63 + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by gdbm $as_me 1.10, which was +generated by GNU Autoconf 2.63. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" +done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + ac_site_file1=$CONFIG_SITE +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test -r "$ac_site_file"; then + { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +gt_needs="$gt_needs need-ngettext" +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + + + + + + + + + + + + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + +ac_aux_dir= +for ac_dir in build-aux "$srcdir"/build-aux; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in build-aux \"$srcdir\"/build-aux" >&5 +$as_echo "$as_me: error: cannot find install-sh or install.sh in build-aux \"$srcdir\"/build-aux" >&2;} + { (exit 1); exit 1; }; } +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +ac_config_headers="$ac_config_headers autoconf.h" + + +am__api_version='1.11' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + +done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5 +$as_echo "$as_me: error: unsafe absolute working directory name" >&2;} + { (exit 1); exit 1; }; };; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5 +$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;} + { (exit 1); exit 1; }; };; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +$as_echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done +done +IFS=$as_save_IFS + +fi + + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:$LINENO: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in +yes) AM_DEFAULT_VERBOSITY=0;; +no) AM_DEFAULT_VERBOSITY=1;; +*) AM_DEFAULT_VERBOSITY=1;; +esac +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='gdbm' + VERSION='1.10' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + + +# Enable silent rules by default: +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in +yes) AM_DEFAULT_VERBOSITY=0;; +no) AM_DEFAULT_VERBOSITY=1;; +*) AM_DEFAULT_VERBOSITY=0;; +esac +AM_BACKSLASH='\' + + +GDBM_VERSION_MAJOR=1 + +GDBM_VERSION_MINOR=10 + +GDBM_VERSION_PATCH=0 + + +# Check whether --enable-memory-mapped-io was given. +if test "${enable_memory_mapped_io+set}" = set; then + enableval=$enable_memory_mapped_io; mapped_io=$enableval +else + mapped_io=yes +fi + + +# Check whether --enable-libgdbm-compat was given. +if test "${enable_libgdbm_compat+set}" = set; then + enableval=$enable_libgdbm_compat; want_compat=$enableval +else + want_compat=no +fi + + +# Check whether --enable-gdbm-export was given. +if test "${enable_gdbm_export+set}" = set; then + enableval=$enable_gdbm_export; want_export=$enableval +else + want_export=no +fi + + + +# Check whether --with-gdbm183-library was given. +if test "${with_gdbm183_library+set}" = set; then + withval=$with_gdbm183_library; GDBM183_LIBRARY=$withval +else + GDBM183_LIBRARY="-lgdbm" +fi + + + +# Check whether --with-gdbm183-libdir was given. +if test "${with_gdbm183_libdir+set}" = set; then + withval=$with_gdbm183_libdir; GDBM183_LIBDIR=$withval +else + GDBM183_LIBDIR="/usr/local/lib" +fi + + + +# Check whether --with-gdbm183-includedir was given. +if test "${with_gdbm183_includedir+set}" = set; then + withval=$with_gdbm183_includedir; GDBM183_INCLUDEDIR=$withval +else + GDBM183_INCLUDEDIR="/usr/local/include" +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { (ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi + +{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +if test -z "$ac_file"; then + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } +fi + +ac_exeext=$ac_cv_exeext + +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + fi + fi +fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +rm -f conftest$ac_cv_exeext +{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if test "${ac_cv_objext+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if test "${ac_cv_c_compiler_gnu+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if test "${ac_cv_prog_cc_g+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:$LINENO: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:$LINENO: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + +done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.2.7a' +macro_revision='1.3121' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if test "${ac_cv_build+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +$as_echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if test "${ac_cv_host+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +$as_echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:$LINENO: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`print -r -- -n 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case "$ECHO" in + printf*) { $as_echo "$as_me:$LINENO: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:$LINENO: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:$LINENO: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if test "${ac_cv_path_SED+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + $as_unset ac_script || ac_script= + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if test "${ac_cv_path_FGREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if test "${lt_cv_path_LD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if test "${lt_cv_prog_gnu_ld+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if test "${lt_cv_path_NM+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DUMPBIN+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if test "${lt_cv_nm_interface+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +# find the maximum length of command line arguments +{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if test "${lt_cv_sys_max_cmd_len+set}" = set; then + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:$LINENO: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if test "${lt_cv_ld_reload_flag+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OBJDUMP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if test "${lt_cv_deplibs_check_method+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AR+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:$LINENO: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_RANLIB+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:$LINENO: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:$LINENO: result: ok" >&5 +$as_echo "ok" >&6; } +fi + + + + + + + + + + + + + + + + + + + + + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if test "${lt_cv_cc_needs_belf+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_cc_needs_belf=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_cc_needs_belf=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_LIPO+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:$LINENO: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OTOOL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OTOOL64+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if test "${lt_cv_apple_cc_single_mod+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if test "${lt_cv_ld_exported_symbols_list+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_ld_exported_symbols_list=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_ld_exported_symbols_list=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + { $as_echo "$as_me:$LINENO: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if test "${lt_cv_ld_force_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + + +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +for ac_header in dlfcn.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + +# Set options + + + + enable_dlopen=no + + + enable_win32_dll=no + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then + withval=$with_pic; pic_mode="$withval" +else + pic_mode=default +fi + + +test -z "$pic_mode" && pic_mode=default + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if test "${lt_cv_objdir+set}" = set; then + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:$LINENO: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + lt_prog_compiler_pic='-Xcompiler -fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +$as_echo "$lt_prog_compiler_pic" >&6; } + + + + + + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if test "${lt_cv_prog_compiler_pic_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_cv_prog_compiler_static_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag= + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' + archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:$LINENO: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if test "${lt_cv_prog_compiler__b+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat >conftest.$ac_ext <<_ACEOF +int foo(void) {} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if test "${lt_cv_archive_cmds_need_lc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then + lt_cv_shlibpath_overrides_runpath=yes +fi + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dl_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 +$as_echo_n "checking for shl_load... " >&6; } +if test "${ac_cv_func_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_shl_load || defined __stub___shl_load +choke me +#endif + +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_shl_load=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_shl_load=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +$as_echo "$ac_cv_func_shl_load" >&6; } +if test "x$ac_cv_func_shl_load" = x""yes; then + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dld_shl_load=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_shl_load=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = x""yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 +$as_echo_n "checking for dlopen... " >&6; } +if test "${ac_cv_func_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_dlopen || defined __stub___dlopen +choke me +#endif + +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +$as_echo "$ac_cv_func_dlopen" >&6; } +if test "x$ac_cv_func_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dl_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if test "${ac_cv_lib_svld_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_svld_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_svld_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if test "${ac_cv_lib_dld_dld_link+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dld_dld_link=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_dld_link=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = x""yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 11074 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +void fnord () __attribute__((visibility("default"))); +#endif + +void fnord () { int i=42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self_static+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 11180 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +void fnord () __attribute__((visibility("default"))); +#endif + +void fnord () { int i=42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + +# Check whether --enable-largefile was given. +if test "${enable_largefile+set}" = set; then + enableval=$enable_largefile; +fi + +if test "$enable_largefile" != no; then + + { $as_echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5 +$as_echo_n "checking for special C compiler options needed for large files... " >&6; } +if test "${ac_cv_sys_largefile_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_sys_largefile_CC=no + if test "$GCC" != yes; then + ac_save_CC=$CC + while :; do + # IRIX 6.2 and later do not support large files by default, + # so use the C compiler's -n32 option if that helps. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext + CC="$CC -n32" + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_sys_largefile_CC=' -n32'; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext + break + done + CC=$ac_save_CC + rm -f conftest.$ac_ext + fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5 +$as_echo "$ac_cv_sys_largefile_CC" >&6; } + if test "$ac_cv_sys_largefile_CC" != no; then + CC=$CC$ac_cv_sys_largefile_CC + fi + + { $as_echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5 +$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } +if test "${ac_cv_sys_file_offset_bits+set}" = set; then + $as_echo_n "(cached) " >&6 +else + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_sys_file_offset_bits=no; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _FILE_OFFSET_BITS 64 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_sys_file_offset_bits=64; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_sys_file_offset_bits=unknown + break +done +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5 +$as_echo "$ac_cv_sys_file_offset_bits" >&6; } +case $ac_cv_sys_file_offset_bits in #( + no | unknown) ;; + *) +cat >>confdefs.h <<_ACEOF +#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits +_ACEOF +;; +esac +rm -rf conftest* + if test $ac_cv_sys_file_offset_bits = unknown; then + { $as_echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5 +$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } +if test "${ac_cv_sys_large_files+set}" = set; then + $as_echo_n "(cached) " >&6 +else + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_sys_large_files=no; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _LARGE_FILES 1 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_sys_large_files=1; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_sys_large_files=unknown + break +done +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5 +$as_echo "$ac_cv_sys_large_files" >&6; } +case $ac_cv_sys_large_files in #( + no | unknown) ;; + *) +cat >>confdefs.h <<_ACEOF +#define _LARGE_FILES $ac_cv_sys_large_files +_ACEOF +;; +esac +rm -rf conftest* + fi +fi + +{ $as_echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if test "${ac_cv_c_const+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset cs; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_c_const=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_c_const=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +cat >>confdefs.h <<\_ACEOF +#define const /**/ +_ACEOF + +fi + + + + { $as_echo "$as_me:$LINENO: checking whether NLS is requested" >&5 +$as_echo_n "checking whether NLS is requested... " >&6; } + # Check whether --enable-nls was given. +if test "${enable_nls+set}" = set; then + enableval=$enable_nls; USE_NLS=$enableval +else + USE_NLS=yes +fi + + { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5 +$as_echo "$USE_NLS" >&6; } + + + + + GETTEXT_MACRO_VERSION=0.18 + + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_MSGFMT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case "$MSGFMT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" + ;; +esac +fi +MSGFMT="$ac_cv_path_MSGFMT" +if test "$MSGFMT" != ":"; then + { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 +$as_echo "$MSGFMT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_GMSGFMT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac +fi +GMSGFMT=$ac_cv_path_GMSGFMT +if test -n "$GMSGFMT"; then + { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +$as_echo "$GMSGFMT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; + *) MSGFMT_015=$MSGFMT ;; + esac + + case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; + *) GMSGFMT_015=$GMSGFMT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_XGETTEXT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case "$XGETTEXT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac +fi +XGETTEXT="$ac_cv_path_XGETTEXT" +if test "$XGETTEXT" != ":"; then + { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +$as_echo "$XGETTEXT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + rm -f messages.po + + case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; + *) XGETTEXT_015=$XGETTEXT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_MSGMERGE+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case "$MSGMERGE" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then + ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" + ;; +esac +fi +MSGMERGE="$ac_cv_path_MSGMERGE" +if test "$MSGMERGE" != ":"; then + { $as_echo "$as_me:$LINENO: result: $MSGMERGE" >&5 +$as_echo "$MSGMERGE" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$localedir" || localedir='${datadir}/locale' + + + test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= + + + ac_config_commands="$ac_config_commands po-directories" + + + + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:$LINENO: checking for ld used by GCC" >&5 +$as_echo_n "checking for ld used by GCC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if test "${acl_cv_path_LD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in + *GNU* | *'with BFD'*) + test "$with_gnu_ld" != no && break ;; + *) + test "$with_gnu_ld" != yes && break ;; + esac + fi + done + IFS="$ac_save_ifs" +else + acl_cv_path_LD="$LD" # Let the user override the test with a path. +fi +fi + +LD="$acl_cv_path_LD" +if test -n "$LD"; then + { $as_echo "$as_me:$LINENO: result: $LD" >&5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if test "${acl_cv_prog_gnu_ld+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU ld's only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$acl_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$acl_cv_prog_gnu_ld + + + + + { $as_echo "$as_me:$LINENO: checking for shared library run path origin" >&5 +$as_echo_n "checking for shared library run path origin... " >&6; } +if test "${acl_cv_rpath+set}" = set; then + $as_echo_n "(cached) " >&6 +else + + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + +fi +{ $as_echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5 +$as_echo "$acl_cv_rpath" >&6; } + wl="$acl_cv_wl" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" + # Check whether --enable-rpath was given. +if test "${enable_rpath+set}" = set; then + enableval=$enable_rpath; : +else + enable_rpath=yes +fi + + + + + acl_libdirstem=lib + acl_libdirstem2= + case "$host_os" in + solaris*) + { $as_echo "$as_me:$LINENO: checking for 64-bit host" >&5 +$as_echo_n "checking for 64-bit host... " >&6; } +if test "${gl_cv_solaris_64bit+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#ifdef _LP64 +sixtyfour bits +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "sixtyfour bits" >/dev/null 2>&1; then + gl_cv_solaris_64bit=yes +else + gl_cv_solaris_64bit=no +fi +rm -f conftest* + + +fi +{ $as_echo "$as_me:$LINENO: result: $gl_cv_solaris_64bit" >&5 +$as_echo "$gl_cv_solaris_64bit" >&6; } + if test $gl_cv_solaris_64bit = yes; then + acl_libdirstem=lib/64 + case "$host_cpu" in + sparc*) acl_libdirstem2=lib/sparcv9 ;; + i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; + esac + fi + ;; + *) + searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` + if test -n "$searchpath"; then + acl_save_IFS="${IFS= }"; IFS=":" + for searchdir in $searchpath; do + if test -d "$searchdir"; then + case "$searchdir" in + */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; + */../ | */.. ) + # Better ignore directories of this form. They are misleading. + ;; + *) searchdir=`cd "$searchdir" && pwd` + case "$searchdir" in + */lib64 ) acl_libdirstem=lib64 ;; + esac ;; + esac + fi + done + IFS="$acl_save_IFS" + fi + ;; + esac + test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" + + + + + + + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libiconv-prefix was given. +if test "${with_libiconv_prefix+set}" = set; then + withval=$with_libiconv_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi + +fi + + LIBICONV= + LTLIBICONV= + INCICONV= + LIBICONV_PREFIX= + HAVE_LIBICONV= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='iconv ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" + ;; + esac + done + fi + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" + done + fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:$LINENO: checking for CFPreferencesCopyAppValue" >&5 +$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } +if test "${gt_cv_func_CFPreferencesCopyAppValue+set}" = set; then + $as_echo_n "(cached) " >&6 +else + gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +CFPreferencesCopyAppValue(NULL, NULL) + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + gt_cv_func_CFPreferencesCopyAppValue=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + gt_cv_func_CFPreferencesCopyAppValue=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_save_LIBS" +fi +{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 +$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } + if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_CFPREFERENCESCOPYAPPVALUE 1 +_ACEOF + + fi + { $as_echo "$as_me:$LINENO: checking for CFLocaleCopyCurrent" >&5 +$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } +if test "${gt_cv_func_CFLocaleCopyCurrent+set}" = set; then + $as_echo_n "(cached) " >&6 +else + gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +CFLocaleCopyCurrent(); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + gt_cv_func_CFLocaleCopyCurrent=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + gt_cv_func_CFLocaleCopyCurrent=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_save_LIBS" +fi +{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 +$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } + if test $gt_cv_func_CFLocaleCopyCurrent = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_CFLOCALECOPYCURRENT 1 +_ACEOF + + fi + INTL_MACOSX_LIBS= + if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then + INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" + fi + + + + + + + LIBINTL= + LTLIBINTL= + POSUB= + + case " $gt_needs " in + *" need-formatstring-macros "*) gt_api_version=3 ;; + *" need-ngettext "*) gt_api_version=2 ;; + *) gt_api_version=1 ;; + esac + gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" + gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" + + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + + + if test $gt_api_version -ge 3; then + gt_revision_test_code=' +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +' + else + gt_revision_test_code= + fi + if test $gt_api_version -ge 2; then + gt_expression_test_code=' + * ngettext ("", "", 0)' + else + gt_expression_test_code= + fi + + { $as_echo "$as_me:$LINENO: checking for GNU gettext in libc" >&5 +$as_echo_n "checking for GNU gettext in libc... " >&6; } +if { as_var=$gt_func_gnugettext_libc; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings; +int +main () +{ +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$gt_func_gnugettext_libc=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$gt_func_gnugettext_libc=no" +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$gt_func_gnugettext_libc'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then + + + + + + am_save_CPPFLAGS="$CPPFLAGS" + + for element in $INCICONV; do + haveit= + for x in $CPPFLAGS; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + + { $as_echo "$as_me:$LINENO: checking for iconv" >&5 +$as_echo_n "checking for iconv... " >&6; } +if test "${am_cv_func_iconv+set}" = set; then + $as_echo_n "(cached) " >&6 +else + + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + am_cv_func_iconv=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + am_cv_lib_iconv=yes + am_cv_func_iconv=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$am_save_LIBS" + fi + +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5 +$as_echo "$am_cv_func_iconv" >&6; } + if test "$am_cv_func_iconv" = yes; then + { $as_echo "$as_me:$LINENO: checking for working iconv" >&5 +$as_echo_n "checking for working iconv... " >&6; } +if test "${am_cv_func_iconv_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + + am_save_LIBS="$LIBS" + if test $am_cv_lib_iconv = yes; then + LIBS="$LIBS $LIBICONV" + fi + if test "$cross_compiling" = yes; then + case "$host_os" in + aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; + *) am_cv_func_iconv_works="guessing yes" ;; + esac +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#include +#include +int main () +{ + /* Test against AIX 5.1 bug: Failures are not distinguishable from successful + returns. */ + { + iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); + if (cd_utf8_to_88591 != (iconv_t)(-1)) + { + static const char input[] = "\342\202\254"; /* EURO SIGN */ + char buf[10]; + const char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_utf8_to_88591, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + return 1; + } + } + /* Test against Solaris 10 bug: Failures are not distinguishable from + successful returns. */ + { + iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); + if (cd_ascii_to_88591 != (iconv_t)(-1)) + { + static const char input[] = "\263"; + char buf[10]; + const char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_ascii_to_88591, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + return 1; + } + } +#if 0 /* This bug could be worked around by the caller. */ + /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; + char buf[50]; + const char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_88591_to_utf8, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if ((int)res > 0) + return 1; + } + } +#endif + /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is + provided. */ + if (/* Try standardized names. */ + iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) + /* Try IRIX, OSF/1 names. */ + && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) + /* Try AIX names. */ + && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) + /* Try HP-UX names. */ + && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) + return 1; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + am_cv_func_iconv_works=yes +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +am_cv_func_iconv_works=no +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + + LIBS="$am_save_LIBS" + +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_func_iconv_works" >&5 +$as_echo "$am_cv_func_iconv_works" >&6; } + case "$am_cv_func_iconv_works" in + *no) am_func_iconv=no am_cv_lib_iconv=no ;; + *) am_func_iconv=yes ;; + esac + else + am_func_iconv=no am_cv_lib_iconv=no + fi + if test "$am_func_iconv" = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_ICONV 1 +_ACEOF + + fi + if test "$am_cv_lib_iconv" = yes; then + { $as_echo "$as_me:$LINENO: checking how to link with libiconv" >&5 +$as_echo_n "checking how to link with libiconv... " >&6; } + { $as_echo "$as_me:$LINENO: result: $LIBICONV" >&5 +$as_echo "$LIBICONV" >&6; } + else + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + + + + + + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libintl-prefix was given. +if test "${with_libintl_prefix+set}" = set; then + withval=$with_libintl_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi + +fi + + LIBINTL= + LTLIBINTL= + INCINTL= + LIBINTL_PREFIX= + HAVE_LIBINTL= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='intl ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" + ;; + esac + done + fi + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" + done + fi + + + + + + + { $as_echo "$as_me:$LINENO: checking for GNU gettext in libintl" >&5 +$as_echo_n "checking for GNU gettext in libintl... " >&6; } +if { as_var=$gt_func_gnugettext_libintl; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); +int +main () +{ +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$gt_func_gnugettext_libintl=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$gt_func_gnugettext_libintl=no" +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then + LIBS="$LIBS $LIBICONV" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); +int +main () +{ +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + LIBINTL="$LIBINTL $LIBICONV" + LTLIBINTL="$LTLIBINTL $LTLIBICONV" + eval "$gt_func_gnugettext_libintl=yes" + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi + CPPFLAGS="$gt_save_CPPFLAGS" + LIBS="$gt_save_LIBS" +fi +ac_res=`eval 'as_val=${'$gt_func_gnugettext_libintl'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + fi + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ + || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools; }; then + gt_use_preinstalled_gnugettext=yes + else + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + + + if test -n "$INTL_MACOSX_LIBS"; then + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" + LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" + fi + fi + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + +cat >>confdefs.h <<\_ACEOF +#define ENABLE_NLS 1 +_ACEOF + + else + USE_NLS=no + fi + fi + + { $as_echo "$as_me:$LINENO: checking whether to use NLS" >&5 +$as_echo_n "checking whether to use NLS... " >&6; } + { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5 +$as_echo "$USE_NLS" >&6; } + if test "$USE_NLS" = "yes"; then + { $as_echo "$as_me:$LINENO: checking where the gettext function comes from" >&5 +$as_echo_n "checking where the gettext function comes from... " >&6; } + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + { $as_echo "$as_me:$LINENO: result: $gt_source" >&5 +$as_echo "$gt_source" >&6; } + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + { $as_echo "$as_me:$LINENO: checking how to link with libintl" >&5 +$as_echo_n "checking how to link with libintl... " >&6; } + { $as_echo "$as_me:$LINENO: result: $LIBINTL" >&5 +$as_echo "$LIBINTL" >&6; } + + for element in $INCINTL; do + haveit= + for x in $CPPFLAGS; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + fi + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_GETTEXT 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_DCGETTEXT 1 +_ACEOF + + fi + + POSUB=po + fi + + + + INTLLIBS="$LIBINTL" + + + + + + + + + + + + + + + + + +for ac_header in stdlib.h string.h sys/file.h unistd.h fcntl.h sys/types.h memory.h sys/termios.h locale.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +$as_echo_n "checking $ac_header usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +$as_echo_n "checking $ac_header presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ------------------------------- ## +## Report this to bug-gdbm@gnu.org ## +## ------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + +fi +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +{ $as_echo "$as_me:$LINENO: checking for main in -ldbm" >&5 +$as_echo_n "checking for main in -ldbm... " >&6; } +if test "${ac_cv_lib_dbm_main+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldbm $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +return main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dbm_main=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dbm_main=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dbm_main" >&5 +$as_echo "$ac_cv_lib_dbm_main" >&6; } +if test "x$ac_cv_lib_dbm_main" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBDBM 1 +_ACEOF + + LIBS="-ldbm $LIBS" + +fi + + +{ $as_echo "$as_me:$LINENO: checking for main in -lndbm" >&5 +$as_echo_n "checking for main in -lndbm... " >&6; } +if test "${ac_cv_lib_ndbm_main+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lndbm $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +return main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_ndbm_main=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_ndbm_main=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ndbm_main" >&5 +$as_echo "$ac_cv_lib_ndbm_main" >&6; } +if test "x$ac_cv_lib_ndbm_main" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBNDBM 1 +_ACEOF + + LIBS="-lndbm $LIBS" + +fi + + + + + + + +for ac_func in rename ftruncate flock lockf fsync setlocale +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$as_ac_var=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + +if test x$mapped_io = xyes +then + + +for ac_header in stdlib.h unistd.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +$as_echo_n "checking $ac_header usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +$as_echo_n "checking $ac_header presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ------------------------------- ## +## Report this to bug-gdbm@gnu.org ## +## ------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + +fi +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_func in getpagesize +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$as_ac_var=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +{ $as_echo "$as_me:$LINENO: checking for working mmap" >&5 +$as_echo_n "checking for working mmap... " >&6; } +if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_mmap_fixed_mapped=no +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +/* malloc might have been renamed as rpl_malloc. */ +#undef malloc + +/* Thanks to Mike Haertel and Jim Avera for this test. + Here is a matrix of mmap possibilities: + mmap private not fixed + mmap private fixed at somewhere currently unmapped + mmap private fixed at somewhere already mapped + mmap shared not fixed + mmap shared fixed at somewhere currently unmapped + mmap shared fixed at somewhere already mapped + For private mappings, we should verify that changes cannot be read() + back from the file, nor mmap's back from the file at a different + address. (There have been systems where private was not correctly + implemented like the infamous i386 svr4.0, and systems where the + VM page cache was not coherent with the file system buffer cache + like early versions of FreeBSD and possibly contemporary NetBSD.) + For shared mappings, we should conversely verify that changes get + propagated back to all the places they're supposed to be. + + Grep wants private fixed already mapped. + The main things grep needs to know about mmap are: + * does it exist and is it safe to write into the mmap'd area + * how to use it (BSD variants) */ + +#include +#include + +#if !defined STDC_HEADERS && !defined HAVE_STDLIB_H +char *malloc (); +#endif + +/* This mess was copied from the GNU getpagesize.h. */ +#ifndef HAVE_GETPAGESIZE +/* Assume that all systems that can run configure have sys/param.h. */ +# ifndef HAVE_SYS_PARAM_H +# define HAVE_SYS_PARAM_H 1 +# endif + +# ifdef _SC_PAGESIZE +# define getpagesize() sysconf(_SC_PAGESIZE) +# else /* no _SC_PAGESIZE */ +# ifdef HAVE_SYS_PARAM_H +# include +# ifdef EXEC_PAGESIZE +# define getpagesize() EXEC_PAGESIZE +# else /* no EXEC_PAGESIZE */ +# ifdef NBPG +# define getpagesize() NBPG * CLSIZE +# ifndef CLSIZE +# define CLSIZE 1 +# endif /* no CLSIZE */ +# else /* no NBPG */ +# ifdef NBPC +# define getpagesize() NBPC +# else /* no NBPC */ +# ifdef PAGESIZE +# define getpagesize() PAGESIZE +# endif /* PAGESIZE */ +# endif /* no NBPC */ +# endif /* no NBPG */ +# endif /* no EXEC_PAGESIZE */ +# else /* no HAVE_SYS_PARAM_H */ +# define getpagesize() 8192 /* punt totally */ +# endif /* no HAVE_SYS_PARAM_H */ +# endif /* no _SC_PAGESIZE */ + +#endif /* no HAVE_GETPAGESIZE */ + +int +main () +{ + char *data, *data2, *data3; + int i, pagesize; + int fd; + + pagesize = getpagesize (); + + /* First, make a file with some known garbage in it. */ + data = (char *) malloc (pagesize); + if (!data) + return 1; + for (i = 0; i < pagesize; ++i) + *(data + i) = rand (); + umask (0); + fd = creat ("conftest.mmap", 0600); + if (fd < 0) + return 1; + if (write (fd, data, pagesize) != pagesize) + return 1; + close (fd); + + /* Next, try to mmap the file at a fixed address which already has + something else allocated at it. If we can, also make sure that + we see the same garbage. */ + fd = open ("conftest.mmap", O_RDWR); + if (fd < 0) + return 1; + data2 = (char *) malloc (2 * pagesize); + if (!data2) + return 1; + data2 += (pagesize - ((long int) data2 & (pagesize - 1))) & (pagesize - 1); + if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_FIXED, fd, 0L)) + return 1; + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data2 + i)) + return 1; + + /* Finally, make sure that changes to the mapped area do not + percolate back to the file as seen by read(). (This is a bug on + some variants of i386 svr4.0.) */ + for (i = 0; i < pagesize; ++i) + *(data2 + i) = *(data2 + i) + 1; + data3 = (char *) malloc (pagesize); + if (!data3) + return 1; + if (read (fd, data3, pagesize) != pagesize) + return 1; + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data3 + i)) + return 1; + close (fd); + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_mmap_fixed_mapped=yes +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_mmap_fixed_mapped=no +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5 +$as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; } +if test $ac_cv_func_mmap_fixed_mapped = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_MMAP 1 +_ACEOF + +fi +rm -f conftest.mmap + + +for ac_func in msync +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$as_ac_var=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +fi +{ $as_echo "$as_me:$LINENO: checking for off_t" >&5 +$as_echo_n "checking for off_t... " >&6; } +if test "${ac_cv_type_off_t+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_type_off_t=no +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof (off_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof ((off_t))) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_type_off_t=yes +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 +$as_echo "$ac_cv_type_off_t" >&6; } +if test "x$ac_cv_type_off_t" = x""yes; then + : +else + +cat >>confdefs.h <<_ACEOF +#define off_t long int +_ACEOF + +fi + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:$LINENO: checking size of off_t" >&5 +$as_echo_n "checking size of off_t... " >&6; } +if test "${ac_cv_sizeof_off_t+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (off_t))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (off_t))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_hi=$ac_mid; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (off_t))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (off_t))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_lo=$ac_mid; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_lo= ac_hi= +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (off_t))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_hi=$ac_mid +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_lo=`expr '(' $ac_mid ')' + 1` +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_off_t=$ac_lo;; +'') if test "$ac_cv_type_off_t" = yes; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (off_t) +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute sizeof (off_t) +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } + else + ac_cv_sizeof_off_t=0 + fi ;; +esac +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +static long int longval () { return (long int) (sizeof (off_t)); } +static unsigned long int ulongval () { return (long int) (sizeof (off_t)); } +#include +#include +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + return 1; + if (((long int) (sizeof (off_t))) < 0) + { + long int i = longval (); + if (i != ((long int) (sizeof (off_t)))) + return 1; + fprintf (f, "%ld", i); + } + else + { + unsigned long int i = ulongval (); + if (i != ((long int) (sizeof (off_t)))) + return 1; + fprintf (f, "%lu", i); + } + /* Do not output a trailing newline, as this causes \r\n confusion + on some platforms. */ + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_off_t=`cat conftest.val` +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +if test "$ac_cv_type_off_t" = yes; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (off_t) +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute sizeof (off_t) +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } + else + ac_cv_sizeof_off_t=0 + fi +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.val +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_off_t" >&5 +$as_echo "$ac_cv_sizeof_off_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_OFF_T $ac_cv_sizeof_off_t +_ACEOF + + +{ $as_echo "$as_me:$LINENO: checking for struct stat.st_blksize" >&5 +$as_echo_n "checking for struct stat.st_blksize... " >&6; } +if test "${ac_cv_member_struct_stat_st_blksize+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static struct stat ac_aggr; +if (ac_aggr.st_blksize) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_member_struct_stat_st_blksize=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static struct stat ac_aggr; +if (sizeof ac_aggr.st_blksize) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_member_struct_stat_st_blksize=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_member_struct_stat_st_blksize=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_blksize" >&5 +$as_echo "$ac_cv_member_struct_stat_st_blksize" >&6; } +if test "x$ac_cv_member_struct_stat_st_blksize" = x""yes; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_STRUCT_STAT_ST_BLKSIZE 1 +_ACEOF + + +fi + + + + + + if test "$want_compat" = yes; then + COMPAT_OPT_TRUE= + COMPAT_OPT_FALSE='#' +else + COMPAT_OPT_TRUE='#' + COMPAT_OPT_FALSE= +fi + + if test "$want_export" = yes; then + ENABLE_EXPORT_TRUE= + ENABLE_EXPORT_FALSE='#' +else + ENABLE_EXPORT_TRUE='#' + ENABLE_EXPORT_FALSE= +fi + + +# Initialize the test suite. +ac_config_commands="$ac_config_commands tests/atconfig" + + +ac_config_files="$ac_config_files tests/Makefile tests/atlocal po/Makefile.in" + + +AUTOM4TE=${AUTOM4TE-"${am_missing_run}autom4te"} + + +ac_config_files="$ac_config_files Makefile src/Makefile src/gdbm.h doc/Makefile compat/Makefile export/Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${COMPAT_OPT_TRUE}" && test -z "${COMPAT_OPT_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"COMPAT_OPT\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"COMPAT_OPT\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${ENABLE_EXPORT_TRUE}" && test -z "${ENABLE_EXPORT_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_EXPORT\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"ENABLE_EXPORT\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi + +: ${CONFIG_STATUS=./config.status} +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 + +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by gdbm $as_me 1.10, which was +generated by GNU Autoconf 2.63. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTION]... [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_version="\\ +gdbm config.status 1.10 +configured by $0, generated by GNU Autoconf 2.63, + with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2008 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + { $as_echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { $as_echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in SHELL \ +ECHO \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +AR \ +AR_FLAGS \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_wl \ +lt_prog_compiler_pic \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_flag_spec_ld \ +hardcode_libdir_separator \ +fix_srcfile_path \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + +# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it + # from automake < 1.5. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "autoconf.h") CONFIG_HEADERS="$CONFIG_HEADERS autoconf.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; + "tests/atconfig") CONFIG_COMMANDS="$CONFIG_COMMANDS tests/atconfig" ;; + "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; + "tests/atlocal") CONFIG_FILES="$CONFIG_FILES tests/atlocal" ;; + "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "src/gdbm.h") CONFIG_FILES="$CONFIG_FILES src/gdbm.h" ;; + "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; + "compat/Makefile") CONFIG_FILES="$CONFIG_FILES compat/Makefile" ;; + "export/Makefile") CONFIG_FILES="$CONFIG_FILES export/Makefile" ;; + + *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + $as_echo "$as_me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=' ' +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } +ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\).*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\).*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +$as_echo "$as_me: error: could not setup config files machinery" >&2;} + { (exit 1); exit 1; }; } +_ACEOF + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +$as_echo "$as_me: error: could not setup config headers machinery" >&2;} + { (exit 1); exit 1; }; } +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 +$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + ac_file_inputs="$ac_file_inputs '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +$as_echo "$as_me: error: could not create -" >&2;} + { (exit 1); exit 1; }; } + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into a binary +# during linking. This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[^=]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$@"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1=\$$1\$2" +} + +_LT_EOF + ;; + esac + + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + "po-directories":C) + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + # Treat a directory as a PO directory if and only if it has a + # POTFILES.in file. This allows packages to have multiple PO + # directories under different names or in different locations. + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assigment from automake < 1.5. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + # Hide the ALL_LINGUAS assigment from automake < 1.5. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + # Compute POFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) + # Compute UPDATEPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) + # Compute DUMMYPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) + # Compute GMOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + UPDATEPOFILES= + DUMMYPOFILES= + GMOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done ;; + "tests/atconfig":C) cat >tests/atconfig <&5 +$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/configure.ac b/configure.ac new file mode 100644 index 0000000..421e230 --- /dev/null +++ b/configure.ac @@ -0,0 +1,126 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2007, 2009, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +m4_define([_GDBM_VERSION_MAJOR], 1) +m4_define([_GDBM_VERSION_MINOR], 10) +dnl m4_define([_GDBM_VERSION_PATCH], 90) + +AC_INIT([gdbm], + _GDBM_VERSION_MAJOR._GDBM_VERSION_MINOR[]m4_ifdef([_GDBM_VERSION_PATCH],._GDBM_VERSION_PATCH), + [bug-gdbm@gnu.org]) +AC_PREREQ(2.63) +AC_CONFIG_SRCDIR([src/gdbmdefs.h]) +AC_CONFIG_AUX_DIR([build-aux]) +AC_CONFIG_HEADERS([autoconf.h]) +AC_CONFIG_MACRO_DIR([m4]) +AM_INIT_AUTOMAKE([gnits 1.11 std-options silent-rules]) + +# Enable silent rules by default: +AM_SILENT_RULES([yes]) + +AC_SUBST([GDBM_VERSION_MAJOR], _GDBM_VERSION_MAJOR) +AC_SUBST([GDBM_VERSION_MINOR], _GDBM_VERSION_MINOR) +AC_SUBST([GDBM_VERSION_PATCH], m4_ifdef([_GDBM_VERSION_PATCH],_GDBM_VERSION_PATCH,0)) + +AC_ARG_ENABLE([memory-mapped-io], + AC_HELP_STRING( + [--enable-memory-mapped-io] + [Use mmap(2) for disk I/O. (Default is YES.)]), + [mapped_io=$enableval], + [mapped_io=yes]) + +AC_ARG_ENABLE([libgdbm-compat], + AC_HELP_STRING( + [--enable-libgdbm-compat] + [Build and install libgdbm_compat. (Default is NO.)]), + [want_compat=$enableval], + [want_compat=no]) + +AC_ARG_ENABLE([gdbm-export], + AC_HELP_STRING( + [--enable-gdbm-export], + [Build and install gdbmexport with specified gdbm 1.8 library. (Default is NO.)]), + [want_export=$enableval], + [want_export=no]) + +AC_ARG_WITH([gdbm183-library], + AC_HELP_STRING( + [--with-gdbm183-library], + [Build gdbmexport with specified (static) library.]), + [GDBM183_LIBRARY=$withval], + [GDBM183_LIBRARY="-lgdbm"]) + +AC_ARG_WITH([gdbm183-libdir], + AC_HELP_STRING( + [--with-gdbm183-libdir], + [Build gdbmexport with the gdbm library in the specified directory.]), + [GDBM183_LIBDIR=$withval], + [GDBM183_LIBDIR="/usr/local/lib"]) + +AC_ARG_WITH([gdbm183-includedir], + AC_HELP_STRING( + [--with-gdbm183-includedir], + [Build gdbmexport with gdbm.h in the specified directory.]), + [GDBM183_INCLUDEDIR=$withval], + [GDBM183_INCLUDEDIR="/usr/local/include"]) + +dnl Check for programs +AC_PROG_CC +AC_PROG_CPP +AC_PROG_INSTALL +AC_PROG_LIBTOOL +AC_SYS_LARGEFILE +dnl AC_PROG_RANLIB +dnl AC_C_BIGENDIAN([]) +AC_C_CONST + +dnl Internationalization macros. +AM_GNU_GETTEXT([external], [need-ngettext]) +AM_GNU_GETTEXT_VERSION(0.18) + +AC_CHECK_HEADERS([stdlib.h string.h sys/file.h unistd.h fcntl.h sys/types.h memory.h sys/termios.h locale.h]) + +AC_CHECK_LIB(dbm, main) +AC_CHECK_LIB(ndbm, main) +AC_CHECK_FUNCS([rename ftruncate flock lockf fsync setlocale]) + +if test x$mapped_io = xyes +then + AC_FUNC_MMAP() + AC_CHECK_FUNCS([msync]) +fi +AC_TYPE_OFF_T +AC_CHECK_SIZEOF(off_t) +AC_CHECK_MEMBERS([struct stat.st_blksize]) + +AC_SUBST(GDBM183_LIBRARY) +AC_SUBST(GDBM183_LIBDIR) +AC_SUBST(GDBM183_INCLUDEDIR) +AM_CONDITIONAL([COMPAT_OPT], [test "$want_compat" = yes]) +AM_CONDITIONAL([ENABLE_EXPORT], [test "$want_export" = yes]) + +# Initialize the test suite. +AC_CONFIG_TESTDIR(tests) +AC_CONFIG_FILES([tests/Makefile tests/atlocal po/Makefile.in]) +AM_MISSING_PROG([AUTOM4TE], [autom4te]) + +AC_CONFIG_FILES([Makefile + src/Makefile + src/gdbm.h + doc/Makefile + compat/Makefile + export/Makefile]) +AC_OUTPUT diff --git a/doc/Makefile.am b/doc/Makefile.am new file mode 100644 index 0000000..f4059d0 --- /dev/null +++ b/doc/Makefile.am @@ -0,0 +1,83 @@ +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +# Documentation + +info_TEXINFOS = gdbm.texinfo +gdbm_TEXINFOS=\ + fdl.texi + +man_MANS = gdbm.3 +EXTRA_DIST = $(man_MANS) + +GENDOCS=gendocs.sh + +TEXI2DVI=texi2dvi -E + +# Make sure you set TEXINPUTS. +# TEXINPUTS=/usr/share/texmf/pdftex/plain/misc/ is ok for most distributions +.PHONY: manual +manual: + TEXINPUTS=$(srcdir):$(top_srcdir)/build-aux:$(TEXINPUTS) \ + MAKEINFO="$(MAKEINFO) $(MAKEINFOFLAGS)" \ + TEXI2DVI="$(TEXI2DVI) -t @finalout" \ + $(GENDOCS) --texi2html $(PACKAGE) '$(PACKAGE_NAME) manual' + +# Checking +check-tabs: + @if test -n "`cat $(info_TEXINFOS) $(gdbm_TEXINFOS) | tr -d -c '\t'`"; then \ + echo "Sources contain tabs; run make untabify"; \ + false; \ + fi + +check-sentence-spacing: + @if grep -q '\. [@A-Z]' $(info_TEXINFOS) $(gdbm_TEXINFOS); then \ + echo >&2 "Sources contain single-space sentence separators"; \ + echo >&2 "Run make fix-sentence-spacing to fix"; \ + fi + +check-fixmes: + @for file in $(info_TEXINFOS) $(gdbm_TEXINFOS); \ + do \ + sed -e = $$file | \ + sed -n 'N;/@c *FIXME:/{s/\(^[0-9][0-9]*\).*@c *FIXME:\(.*\)/'$$file':\1: \2/gp}'; \ + done > $@-t; \ + if [ -s $@-t ]; then \ + echo "Unresolved FIXMEs:"; \ + cat $@-t; \ + rm $@-t; \ + false; \ + else \ + rm -f $@-t; \ + fi + +check-format: check-tabs check-sentence-spacing + +check-docs: check-format check-fixmes + +untabify: + emacs -batch -l untabify.el $(info_TEXINFOS) $(gdbm_TEXINFOS) + +fix-sentence-spacing: + for file in $(info_TEXINFOS) $(gdbm_TEXINFOS); \ + do \ + if grep -q '\. [@A-Z]' $$file; then \ + mv $$file $${file}~; \ + sed -r 's/\. ([@A-Z])/. \1/g' $${file}~ > $$file; \ + fi; \ + done + +final: untabify fix-sentence-spacing \ No newline at end of file diff --git a/doc/Makefile.in b/doc/Makefile.in new file mode 100644 index 0000000..7379b75 --- /dev/null +++ b/doc/Makefile.in @@ -0,0 +1,811 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +# Documentation +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = doc +DIST_COMMON = $(gdbm_TEXINFOS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/stamp-vti \ + $(srcdir)/version.texi +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/autoconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +INFO_DEPS = $(srcdir)/gdbm.info +TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex +am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux +DVIS = gdbm.dvi +PDFS = gdbm.pdf +PSS = gdbm.ps +HTMLS = gdbm.html +TEXINFOS = gdbm.texinfo +TEXI2PDF = $(TEXI2DVI) --pdf --batch +MAKEINFOHTML = $(MAKEINFO) --html +AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) +DVIPS = dvips +am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man3dir)" +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +man3dir = $(mandir)/man3 +NROFF = nroff +MANS = $(man_MANS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOM4TE = @AUTOM4TE@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GDBM183_INCLUDEDIR = @GDBM183_INCLUDEDIR@ +GDBM183_LIBDIR = @GDBM183_LIBDIR@ +GDBM183_LIBRARY = @GDBM183_LIBRARY@ +GDBM_VERSION_MAJOR = @GDBM_VERSION_MAJOR@ +GDBM_VERSION_MINOR = @GDBM_VERSION_MINOR@ +GDBM_VERSION_PATCH = @GDBM_VERSION_PATCH@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +info_TEXINFOS = gdbm.texinfo +gdbm_TEXINFOS = \ + fdl.texi + +man_MANS = gdbm.3 +EXTRA_DIST = $(man_MANS) +GENDOCS = gendocs.sh +TEXI2DVI = texi2dvi -E +all: all-am + +.SUFFIXES: +.SUFFIXES: .dvi .html .info .pdf .ps .texinfo +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits doc/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnits doc/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +.texinfo.info: + restore=: && backupdir="$(am__leading_dot)am$$$$" && \ + am__cwd=`pwd` && $(am__cd) $(srcdir) && \ + rm -rf $$backupdir && mkdir $$backupdir && \ + if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ + for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ + if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ + done; \ + else :; fi && \ + cd "$$am__cwd"; \ + if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ + -o $@ $<; \ + then \ + rc=0; \ + $(am__cd) $(srcdir); \ + else \ + rc=$$?; \ + $(am__cd) $(srcdir) && \ + $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ + fi; \ + rm -rf $$backupdir; exit $$rc + +.texinfo.dvi: + TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ + $(TEXI2DVI) $< + +.texinfo.pdf: + TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ + $(TEXI2PDF) $< + +.texinfo.html: + rm -rf $(@:.html=.htp) + if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ + -o $(@:.html=.htp) $<; \ + then \ + rm -rf $@; \ + if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ + mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ + else \ + if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ + rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ + exit 1; \ + fi +$(srcdir)/gdbm.info: gdbm.texinfo $(srcdir)/version.texi $(gdbm_TEXINFOS) +gdbm.dvi: gdbm.texinfo $(srcdir)/version.texi $(gdbm_TEXINFOS) +gdbm.pdf: gdbm.texinfo $(srcdir)/version.texi $(gdbm_TEXINFOS) +gdbm.html: gdbm.texinfo $(srcdir)/version.texi $(gdbm_TEXINFOS) +$(srcdir)/version.texi: $(srcdir)/stamp-vti +$(srcdir)/stamp-vti: gdbm.texinfo $(top_srcdir)/configure + @(dir=.; test -f ./gdbm.texinfo || dir=$(srcdir); \ + set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/gdbm.texinfo`; \ + echo "@set UPDATED $$1 $$2 $$3"; \ + echo "@set UPDATED-MONTH $$2 $$3"; \ + echo "@set EDITION $(VERSION)"; \ + echo "@set VERSION $(VERSION)") > vti.tmp + @cmp -s vti.tmp $(srcdir)/version.texi \ + || (echo "Updating $(srcdir)/version.texi"; \ + cp vti.tmp $(srcdir)/version.texi) + -@rm -f vti.tmp + @cp $(srcdir)/version.texi $@ + +mostlyclean-vti: + -rm -f vti.tmp + +maintainer-clean-vti: + -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi +.dvi.ps: + TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + $(DVIPS) -o $@ $< + +uninstall-dvi-am: + @$(NORMAL_UNINSTALL) + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ + rm -f "$(DESTDIR)$(dvidir)/$$f"; \ + done + +uninstall-html-am: + @$(NORMAL_UNINSTALL) + @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ + rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ + done + +uninstall-info-am: + @$(PRE_UNINSTALL) + @if test -d '$(DESTDIR)$(infodir)' && \ + (install-info --version && \ + install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ + if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ + then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \ + done; \ + else :; fi + @$(NORMAL_UNINSTALL) + @list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ + (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ + echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ + rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ + else :; fi); \ + done + +uninstall-pdf-am: + @$(NORMAL_UNINSTALL) + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ + rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ + done + +uninstall-ps-am: + @$(NORMAL_UNINSTALL) + @list='$(PSS)'; test -n "$(psdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ + rm -f "$(DESTDIR)$(psdir)/$$f"; \ + done + +dist-info: $(INFO_DEPS) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + list='$(INFO_DEPS)'; \ + for base in $$list; do \ + case $$base in \ + $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ + esac; \ + if test -f $$base; then d=.; else d=$(srcdir); fi; \ + base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ + for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ + if test -f $$file; then \ + relfile=`expr "$$file" : "$$d/\(.*\)"`; \ + test -f "$(distdir)/$$relfile" || \ + cp -p $$file "$(distdir)/$$relfile"; \ + else :; fi; \ + done; \ + done + +mostlyclean-aminfo: + -rm -rf gdbm.aux gdbm.cp gdbm.cps gdbm.fl gdbm.fn gdbm.kw gdbm.ky gdbm.log \ + gdbm.pg gdbm.tmp gdbm.toc gdbm.tp gdbm.vr + +clean-aminfo: + -test -z "gdbm.dvi gdbm.pdf gdbm.ps gdbm.html" \ + || rm -rf gdbm.dvi gdbm.pdf gdbm.ps gdbm.html + +maintainer-clean-aminfo: + @list='$(INFO_DEPS)'; for i in $$list; do \ + i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ + echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ + rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ + done +install-man3: $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)" + @list=''; test -n "$(man3dir)" || exit 0; \ + { for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.3[a-z]*$$/p'; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ + done; } + +uninstall-man3: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man3dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.3[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + test -z "$$files" || { \ + echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(man3dir)" && rm -f $$files; } +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically \`make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-info +check-am: all-am +check: check-am +all-am: Makefile $(INFO_DEPS) $(MANS) +installdirs: + for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man3dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: $(DVIS) + +html: html-am + +html-am: $(HTMLS) + +info: info-am + +info-am: $(INFO_DEPS) + +install-data-am: install-info-am install-man + +install-dvi: install-dvi-am + +install-dvi-am: $(DVIS) + @$(NORMAL_INSTALL) + test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)" + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \ + done +install-exec-am: + +install-html: install-html-am + +install-html-am: $(HTMLS) + @$(NORMAL_INSTALL) + test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)" + @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \ + for p in $$list; do \ + if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ + $(am__strip_dir) \ + if test -d "$$d$$p"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ + $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ + echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ + $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ + else \ + list2="$$list2 $$d$$p"; \ + fi; \ + done; \ + test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ + done; } +install-info: install-info-am + +install-info-am: $(INFO_DEPS) + @$(NORMAL_INSTALL) + test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ + for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + esac; \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ + for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ + $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ + if test -f $$ifile; then \ + echo "$$ifile"; \ + else : ; fi; \ + done; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done + @$(POST_INSTALL) + @if (install-info --version && \ + install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ + install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ + done; \ + else : ; fi +install-man: install-man3 + +install-pdf: install-pdf-am + +install-pdf-am: $(PDFS) + @$(NORMAL_INSTALL) + test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)" + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done +install-ps: install-ps-am + +install-ps-am: $(PSS) + @$(NORMAL_INSTALL) + test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)" + @list='$(PSS)'; test -n "$(psdir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-aminfo \ + maintainer-clean-generic maintainer-clean-vti + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \ + mostlyclean-libtool mostlyclean-vti + +pdf: pdf-am + +pdf-am: $(PDFS) + +ps: ps-am + +ps-am: $(PSS) + +uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ + uninstall-man uninstall-pdf-am uninstall-ps-am + +uninstall-man: uninstall-man3 + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-aminfo clean-generic \ + clean-libtool dist-info distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-man3 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-aminfo \ + maintainer-clean-generic maintainer-clean-vti mostlyclean \ + mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool \ + mostlyclean-vti pdf pdf-am ps ps-am uninstall uninstall-am \ + uninstall-dvi-am uninstall-html-am uninstall-info-am \ + uninstall-man uninstall-man3 uninstall-pdf-am uninstall-ps-am + + +# Make sure you set TEXINPUTS. +# TEXINPUTS=/usr/share/texmf/pdftex/plain/misc/ is ok for most distributions +.PHONY: manual +manual: + TEXINPUTS=$(srcdir):$(top_srcdir)/build-aux:$(TEXINPUTS) \ + MAKEINFO="$(MAKEINFO) $(MAKEINFOFLAGS)" \ + TEXI2DVI="$(TEXI2DVI) -t @finalout" \ + $(GENDOCS) --texi2html $(PACKAGE) '$(PACKAGE_NAME) manual' + +# Checking +check-tabs: + @if test -n "`cat $(info_TEXINFOS) $(gdbm_TEXINFOS) | tr -d -c '\t'`"; then \ + echo "Sources contain tabs; run make untabify"; \ + false; \ + fi + +check-sentence-spacing: + @if grep -q '\. [@A-Z]' $(info_TEXINFOS) $(gdbm_TEXINFOS); then \ + echo >&2 "Sources contain single-space sentence separators"; \ + echo >&2 "Run make fix-sentence-spacing to fix"; \ + fi + +check-fixmes: + @for file in $(info_TEXINFOS) $(gdbm_TEXINFOS); \ + do \ + sed -e = $$file | \ + sed -n 'N;/@c *FIXME:/{s/\(^[0-9][0-9]*\).*@c *FIXME:\(.*\)/'$$file':\1: \2/gp}'; \ + done > $@-t; \ + if [ -s $@-t ]; then \ + echo "Unresolved FIXMEs:"; \ + cat $@-t; \ + rm $@-t; \ + false; \ + else \ + rm -f $@-t; \ + fi + +check-format: check-tabs check-sentence-spacing + +check-docs: check-format check-fixmes + +untabify: + emacs -batch -l untabify.el $(info_TEXINFOS) $(gdbm_TEXINFOS) + +fix-sentence-spacing: + for file in $(info_TEXINFOS) $(gdbm_TEXINFOS); \ + do \ + if grep -q '\. [@A-Z]' $$file; then \ + mv $$file $${file}~; \ + sed -r 's/\. ([@A-Z])/. \1/g' $${file}~ > $$file; \ + fi; \ + done + +final: untabify fix-sentence-spacing + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/fdl.texi b/doc/fdl.texi new file mode 100644 index 0000000..20fe23a --- /dev/null +++ b/doc/fdl.texi @@ -0,0 +1,507 @@ +@c The GNU Free Documentation License. +@center Version 1.3, 3 November 2008 + +@c This file is intended to be included within another document, +@c hence no sectioning command or @node. + +@display +Copyright @copyright{} 2000, 2001, 2002, 2007, 2008, 2011 Free Software +Foundation, Inc. +@uref{http://fsf.org/} + +Everyone is permitted to copy and distribute verbatim copies +of this license document, but changing it is not allowed. +@end display + +@enumerate 0 +@item +PREAMBLE + +The purpose of this License is to make a manual, textbook, or other +functional and useful document @dfn{free} in the sense of freedom: to +assure everyone the effective freedom to copy and redistribute it, +with or without modifying it, either commercially or noncommercially. +Secondarily, this License preserves for the author and publisher a way +to get credit for their work, while not being considered responsible +for modifications made by others. + +This License is a kind of ``copyleft'', which means that derivative +works of the document must themselves be free in the same sense. It +complements the GNU General Public License, which is a copyleft +license designed for free software. + +We have designed this License in order to use it for manuals for free +software, because free software needs free documentation: a free +program should come with manuals providing the same freedoms that the +software does. But this License is not limited to software manuals; +it can be used for any textual work, regardless of subject matter or +whether it is published as a printed book. We recommend this License +principally for works whose purpose is instruction or reference. + +@item +APPLICABILITY AND DEFINITIONS + +This License applies to any manual or other work, in any medium, that +contains a notice placed by the copyright holder saying it can be +distributed under the terms of this License. Such a notice grants a +world-wide, royalty-free license, unlimited in duration, to use that +work under the conditions stated herein. The ``Document'', below, +refers to any such manual or work. Any member of the public is a +licensee, and is addressed as ``you''. You accept the license if you +copy, modify or distribute the work in a way requiring permission +under copyright law. + +A ``Modified Version'' of the Document means any work containing the +Document or a portion of it, either copied verbatim, or with +modifications and/or translated into another language. + +A ``Secondary Section'' is a named appendix or a front-matter section +of the Document that deals exclusively with the relationship of the +publishers or authors of the Document to the Document's overall +subject (or to related matters) and contains nothing that could fall +directly within that overall subject. (Thus, if the Document is in +part a textbook of mathematics, a Secondary Section may not explain +any mathematics.) The relationship could be a matter of historical +connection with the subject or with related matters, or of legal, +commercial, philosophical, ethical or political position regarding +them. + +The ``Invariant Sections'' are certain Secondary Sections whose titles +are designated, as being those of Invariant Sections, in the notice +that says that the Document is released under this License. If a +section does not fit the above definition of Secondary then it is not +allowed to be designated as Invariant. The Document may contain zero +Invariant Sections. If the Document does not identify any Invariant +Sections then there are none. + +The ``Cover Texts'' are certain short passages of text that are listed, +as Front-Cover Texts or Back-Cover Texts, in the notice that says that +the Document is released under this License. A Front-Cover Text may +be at most 5 words, and a Back-Cover Text may be at most 25 words. + +A ``Transparent'' copy of the Document means a machine-readable copy, +represented in a format whose specification is available to the +general public, that is suitable for revising the document +straightforwardly with generic text editors or (for images composed of +pixels) generic paint programs or (for drawings) some widely available +drawing editor, and that is suitable for input to text formatters or +for automatic translation to a variety of formats suitable for input +to text formatters. A copy made in an otherwise Transparent file +format whose markup, or absence of markup, has been arranged to thwart +or discourage subsequent modification by readers is not Transparent. +An image format is not Transparent if used for any substantial amount +of text. A copy that is not ``Transparent'' is called ``Opaque''. + +Examples of suitable formats for Transparent copies include plain +@sc{ascii} without markup, Texinfo input format, La@TeX{} input +format, @acronym{SGML} or @acronym{XML} using a publicly available +@acronym{DTD}, and standard-conforming simple @acronym{HTML}, +PostScript or @acronym{PDF} designed for human modification. Examples +of transparent image formats include @acronym{PNG}, @acronym{XCF} and +@acronym{JPG}. Opaque formats include proprietary formats that can be +read and edited only by proprietary word processors, @acronym{SGML} or +@acronym{XML} for which the @acronym{DTD} and/or processing tools are +not generally available, and the machine-generated @acronym{HTML}, +PostScript or @acronym{PDF} produced by some word processors for +output purposes only. + +The ``Title Page'' means, for a printed book, the title page itself, +plus such following pages as are needed to hold, legibly, the material +this License requires to appear in the title page. For works in +formats which do not have any title page as such, ``Title Page'' means +the text near the most prominent appearance of the work's title, +preceding the beginning of the body of the text. + +The ``publisher'' means any person or entity that distributes copies +of the Document to the public. + +A section ``Entitled XYZ'' means a named subunit of the Document whose +title either is precisely XYZ or contains XYZ in parentheses following +text that translates XYZ in another language. (Here XYZ stands for a +specific section name mentioned below, such as ``Acknowledgements'', +``Dedications'', ``Endorsements'', or ``History''.) To ``Preserve the Title'' +of such a section when you modify the Document means that it remains a +section ``Entitled XYZ'' according to this definition. + +The Document may include Warranty Disclaimers next to the notice which +states that this License applies to the Document. These Warranty +Disclaimers are considered to be included by reference in this +License, but only as regards disclaiming warranties: any other +implication that these Warranty Disclaimers may have is void and has +no effect on the meaning of this License. + +@item +VERBATIM COPYING + +You may copy and distribute the Document in any medium, either +commercially or noncommercially, provided that this License, the +copyright notices, and the license notice saying this License applies +to the Document are reproduced in all copies, and that you add no other +conditions whatsoever to those of this License. You may not use +technical measures to obstruct or control the reading or further +copying of the copies you make or distribute. However, you may accept +compensation in exchange for copies. If you distribute a large enough +number of copies you must also follow the conditions in section 3. + +You may also lend copies, under the same conditions stated above, and +you may publicly display copies. + +@item +COPYING IN QUANTITY + +If you publish printed copies (or copies in media that commonly have +printed covers) of the Document, numbering more than 100, and the +Document's license notice requires Cover Texts, you must enclose the +copies in covers that carry, clearly and legibly, all these Cover +Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on +the back cover. Both covers must also clearly and legibly identify +you as the publisher of these copies. The front cover must present +the full title with all words of the title equally prominent and +visible. You may add other material on the covers in addition. +Copying with changes limited to the covers, as long as they preserve +the title of the Document and satisfy these conditions, can be treated +as verbatim copying in other respects. + +If the required texts for either cover are too voluminous to fit +legibly, you should put the first ones listed (as many as fit +reasonably) on the actual cover, and continue the rest onto adjacent +pages. + +If you publish or distribute Opaque copies of the Document numbering +more than 100, you must either include a machine-readable Transparent +copy along with each Opaque copy, or state in or with each Opaque copy +a computer-network location from which the general network-using +public has access to download using public-standard network protocols +a complete Transparent copy of the Document, free of added material. +If you use the latter option, you must take reasonably prudent steps, +when you begin distribution of Opaque copies in quantity, to ensure +that this Transparent copy will remain thus accessible at the stated +location until at least one year after the last time you distribute an +Opaque copy (directly or through your agents or retailers) of that +edition to the public. + +It is requested, but not required, that you contact the authors of the +Document well before redistributing any large number of copies, to give +them a chance to provide you with an updated version of the Document. + +@item +MODIFICATIONS + +You may copy and distribute a Modified Version of the Document under +the conditions of sections 2 and 3 above, provided that you release +the Modified Version under precisely this License, with the Modified +Version filling the role of the Document, thus licensing distribution +and modification of the Modified Version to whoever possesses a copy +of it. In addition, you must do these things in the Modified Version: + +@enumerate A +@item +Use in the Title Page (and on the covers, if any) a title distinct +from that of the Document, and from those of previous versions +(which should, if there were any, be listed in the History section +of the Document). You may use the same title as a previous version +if the original publisher of that version gives permission. + +@item +List on the Title Page, as authors, one or more persons or entities +responsible for authorship of the modifications in the Modified +Version, together with at least five of the principal authors of the +Document (all of its principal authors, if it has fewer than five), +unless they release you from this requirement. + +@item +State on the Title page the name of the publisher of the +Modified Version, as the publisher. + +@item +Preserve all the copyright notices of the Document. + +@item +Add an appropriate copyright notice for your modifications +adjacent to the other copyright notices. + +@item +Include, immediately after the copyright notices, a license notice +giving the public permission to use the Modified Version under the +terms of this License, in the form shown in the Addendum below. + +@item +Preserve in that license notice the full lists of Invariant Sections +and required Cover Texts given in the Document's license notice. + +@item +Include an unaltered copy of this License. + +@item +Preserve the section Entitled ``History'', Preserve its Title, and add +to it an item stating at least the title, year, new authors, and +publisher of the Modified Version as given on the Title Page. If +there is no section Entitled ``History'' in the Document, create one +stating the title, year, authors, and publisher of the Document as +given on its Title Page, then add an item describing the Modified +Version as stated in the previous sentence. + +@item +Preserve the network location, if any, given in the Document for +public access to a Transparent copy of the Document, and likewise +the network locations given in the Document for previous versions +it was based on. These may be placed in the ``History'' section. +You may omit a network location for a work that was published at +least four years before the Document itself, or if the original +publisher of the version it refers to gives permission. + +@item +For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve +the Title of the section, and preserve in the section all the +substance and tone of each of the contributor acknowledgements and/or +dedications given therein. + +@item +Preserve all the Invariant Sections of the Document, +unaltered in their text and in their titles. Section numbers +or the equivalent are not considered part of the section titles. + +@item +Delete any section Entitled ``Endorsements''. Such a section +may not be included in the Modified Version. + +@item +Do not retitle any existing section to be Entitled ``Endorsements'' or +to conflict in title with any Invariant Section. + +@item +Preserve any Warranty Disclaimers. +@end enumerate + +If the Modified Version includes new front-matter sections or +appendices that qualify as Secondary Sections and contain no material +copied from the Document, you may at your option designate some or all +of these sections as invariant. To do this, add their titles to the +list of Invariant Sections in the Modified Version's license notice. +These titles must be distinct from any other section titles. + +You may add a section Entitled ``Endorsements'', provided it contains +nothing but endorsements of your Modified Version by various +parties---for example, statements of peer review or that the text has +been approved by an organization as the authoritative definition of a +standard. + +You may add a passage of up to five words as a Front-Cover Text, and a +passage of up to 25 words as a Back-Cover Text, to the end of the list +of Cover Texts in the Modified Version. Only one passage of +Front-Cover Text and one of Back-Cover Text may be added by (or +through arrangements made by) any one entity. If the Document already +includes a cover text for the same cover, previously added by you or +by arrangement made by the same entity you are acting on behalf of, +you may not add another; but you may replace the old one, on explicit +permission from the previous publisher that added the old one. + +The author(s) and publisher(s) of the Document do not by this License +give permission to use their names for publicity for or to assert or +imply endorsement of any Modified Version. + +@item +COMBINING DOCUMENTS + +You may combine the Document with other documents released under this +License, under the terms defined in section 4 above for modified +versions, provided that you include in the combination all of the +Invariant Sections of all of the original documents, unmodified, and +list them all as Invariant Sections of your combined work in its +license notice, and that you preserve all their Warranty Disclaimers. + +The combined work need only contain one copy of this License, and +multiple identical Invariant Sections may be replaced with a single +copy. If there are multiple Invariant Sections with the same name but +different contents, make the title of each such section unique by +adding at the end of it, in parentheses, the name of the original +author or publisher of that section if known, or else a unique number. +Make the same adjustment to the section titles in the list of +Invariant Sections in the license notice of the combined work. + +In the combination, you must combine any sections Entitled ``History'' +in the various original documents, forming one section Entitled +``History''; likewise combine any sections Entitled ``Acknowledgements'', +and any sections Entitled ``Dedications''. You must delete all +sections Entitled ``Endorsements.'' + +@item +COLLECTIONS OF DOCUMENTS + +You may make a collection consisting of the Document and other documents +released under this License, and replace the individual copies of this +License in the various documents with a single copy that is included in +the collection, provided that you follow the rules of this License for +verbatim copying of each of the documents in all other respects. + +You may extract a single document from such a collection, and distribute +it individually under this License, provided you insert a copy of this +License into the extracted document, and follow this License in all +other respects regarding verbatim copying of that document. + +@item +AGGREGATION WITH INDEPENDENT WORKS + +A compilation of the Document or its derivatives with other separate +and independent documents or works, in or on a volume of a storage or +distribution medium, is called an ``aggregate'' if the copyright +resulting from the compilation is not used to limit the legal rights +of the compilation's users beyond what the individual works permit. +When the Document is included in an aggregate, this License does not +apply to the other works in the aggregate which are not themselves +derivative works of the Document. + +If the Cover Text requirement of section 3 is applicable to these +copies of the Document, then if the Document is less than one half of +the entire aggregate, the Document's Cover Texts may be placed on +covers that bracket the Document within the aggregate, or the +electronic equivalent of covers if the Document is in electronic form. +Otherwise they must appear on printed covers that bracket the whole +aggregate. + +@item +TRANSLATION + +Translation is considered a kind of modification, so you may +distribute translations of the Document under the terms of section 4. +Replacing Invariant Sections with translations requires special +permission from their copyright holders, but you may include +translations of some or all Invariant Sections in addition to the +original versions of these Invariant Sections. You may include a +translation of this License, and all the license notices in the +Document, and any Warranty Disclaimers, provided that you also include +the original English version of this License and the original versions +of those notices and disclaimers. In case of a disagreement between +the translation and the original version of this License or a notice +or disclaimer, the original version will prevail. + +If a section in the Document is Entitled ``Acknowledgements'', +``Dedications'', or ``History'', the requirement (section 4) to Preserve +its Title (section 1) will typically require changing the actual +title. + +@item +TERMINATION + +You may not copy, modify, sublicense, or distribute the Document +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense, or distribute it is void, and +will automatically terminate your rights under this License. + +However, if you cease all violation of this License, then your license +from a particular copyright holder is reinstated (a) provisionally, +unless and until the copyright holder explicitly and finally +terminates your license, and (b) permanently, if the copyright holder +fails to notify you of the violation by some reasonable means prior to +60 days after the cessation. + +Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + +Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, receipt of a copy of some or all of the same material does +not give you any rights to use it. + +@item +FUTURE REVISIONS OF THIS LICENSE + +The Free Software Foundation may publish new, revised versions +of the GNU Free Documentation License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. See +@uref{http://www.gnu.org/copyleft/}. + +Each version of the License is given a distinguishing version number. +If the Document specifies that a particular numbered version of this +License ``or any later version'' applies to it, you have the option of +following the terms and conditions either of that specified version or +of any later version that has been published (not as a draft) by the +Free Software Foundation. If the Document does not specify a version +number of this License, you may choose any version ever published (not +as a draft) by the Free Software Foundation. If the Document +specifies that a proxy can decide which future versions of this +License can be used, that proxy's public statement of acceptance of a +version permanently authorizes you to choose that version for the +Document. + +@item +RELICENSING + +``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any +World Wide Web server that publishes copyrightable works and also +provides prominent facilities for anybody to edit those works. A +public wiki that anybody can edit is an example of such a server. A +``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the +site means any set of copyrightable works thus published on the MMC +site. + +``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0 +license published by Creative Commons Corporation, a not-for-profit +corporation with a principal place of business in San Francisco, +California, as well as future copyleft versions of that license +published by that same organization. + +``Incorporate'' means to publish or republish a Document, in whole or +in part, as part of another Document. + +An MMC is ``eligible for relicensing'' if it is licensed under this +License, and if all works that were first published under this License +somewhere other than this MMC, and subsequently incorporated in whole +or in part into the MMC, (1) had no cover texts or invariant sections, +and (2) were thus incorporated prior to November 1, 2008. + +The operator of an MMC Site may republish an MMC contained in the site +under CC-BY-SA on the same site at any time before August 1, 2009, +provided the MMC is eligible for relicensing. + +@end enumerate + +@page +@heading ADDENDUM: How to use this License for your documents + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and +license notices just after the title page: + +@smallexample +@group + Copyright (C) @var{year} @var{your name}. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.3 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled ``GNU + Free Documentation License''. +@end group +@end smallexample + +If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, +replace the ``with@dots{}Texts.'' line with this: + +@smallexample +@group + with the Invariant Sections being @var{list their titles}, with + the Front-Cover Texts being @var{list}, and with the Back-Cover Texts + being @var{list}. +@end group +@end smallexample + +If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + +If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, +to permit their use in free software. + +@c Local Variables: +@c ispell-local-pdict: "ispell-dict" +@c End: + diff --git a/doc/gdbm.3 b/doc/gdbm.3 new file mode 100644 index 0000000..e3b90d4 --- /dev/null +++ b/doc/gdbm.3 @@ -0,0 +1,468 @@ +.\" This file is part of GDBM. +.\" Copyright (C) 2011 Free Software Foundation, Inc. +.\" +.\" GDBM is free software; you can redistribute it and/or modify +.\" it under the terms of the GNU General Public License as published by +.\" the Free Software Foundation; either version 3, or (at your option) +.\" any later version. +.\" +.\" GDBM is distributed in the hope that it will be useful, +.\" but WITHOUT ANY WARRANTY; without even the implied warranty of +.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.\" GNU General Public License for more details. +.\" +.\" You should have received a copy of the GNU General Public License +.\" along with GDBM. If not, see . */ +.TH GDBM 3 "August 9, 2011" "GDBM" "GDBM User Reference" +.ds ve 1.9 +.SH NAME +GDBM - The GNU database manager. Includes \fBdbm\fR and \fBndbm\fR +compatability. (Version \*(ve.) +.SH SYNOPSIS +.nf +.B #include +.sp +.BI "extern gdbm_error" " gdbm_errno"; +.br +.BI "extern char *" gdbm_version ; +.br +.BI "GDBM_FILE gdbm_open (const char *" name ", int " block_size ", " +.ti +21 +.BI "int " flags ", int " mode ", " +.ti +21 +.BI "void (*" fatal_func ")(const char *))"; +.br +.BI "void gdbm_close (GDBM_FILE " dbf ");" +.br +.BI "int gdbm_store (GDBM_FILE " dbf ", datum " key ", datum " content ", int " flag ); +.br +.BI "datum gdbm_fetch (GDBM_FILE " dbf ", datum " key ); +.br +.BI "int gdbm_delete (GDBM_FILE " dbf ", datum " key ); +.br +.BI "datum gdbm_firstkey (GDBM_FILE " dbf ");" +.br +.BI "datum gdbm_nextkey (GDBM_FILE " dbf ", datum " key ); +.br +.BI "int gdbm_reorganize (GDBM_FILE " dbf ");" +.br +.BI "void gdbm_sync (GDBM_FILE " dbf ");" +.br +.BI "int gdbm_exists (GDBM_FILE " dbf ", datum " key ); +.br +.BI "const char *gdbm_strerror (gdbm_error " errno ); +.br +.BI "int gdbm_setopt (GDBM_FILE " dbf ", int " option ", int " value ", int " size ); +.br +.BI "int gdbm_fdesc (GDBM_FILE " dbf ); +.br +.PP +.SS DBM Compatability routines: +.PP +.B #include +.sp +.BI "int dbminit (const char *" name ");" +.br +.BI "int store (datum " key ", datum " content ); +.br +.BI "datum fetch (datum " key ); +.br +.BI "int delete (datum " key ); +.br +.BI "datum firstkey (void);" +.br +.BI "datum nextkey (datum " key ); +.br +.BI "int dbmclose (void);" +.PP +.SS NDBM Compatability routines: +.PP +.B #include +.sp +.BI "DBM *dbm_open (const char *" name ", int " flags ", int " mode ); +.br +.BI "void dbm_close (DBM *" file ); +.BI datum dbm_fetch (DBM *" file ", datum " key ); +.br +.BI "int dbm_store (DBM *" file ", datum " key ", datum " content ", int " flags ); +.br +.BI "int dbm_delete (DBM *" file ", datum " key ); +.br +.BI "datum dbm_firstkey (DBM *" file ); +.br +.BI "datum dbm_nextkey (DBM *" file ", datum " key ); +.br +.BI "int dbm_error (DBM *" file ); +.br +.BI "int dbm_clearerr (DBM *" file ); +.br +.BI "int dbm_pagfno (DBM *" file ); +.br +.BI "int dbm_dirfno (DBM *" file ); +.br +.BI "int dbm_rdonly (DBM *" file ); +.SH DESCRIPTION +\fBGNU dbm\fR is a library of routines that manages data files that contain +key/data pairs. The access provided is that of storing, +retrieval, and deletion by key and a non-sorted traversal of all +keys. A process is allowed to use multiple data files at the +same time. + +This manpage is a short description of the \fBGDBM\fR library. +For a detailed discussion, including examples of the configuration and +usage recommendations, refer to the \fBGDBM Manual\fR available in +Texinfo format. To access it, run: + + \fBinfo gdbm\fR + +Should any discrepancies occur between this manpage and the +\fBGDBM Manual\fR, the later shall be considered the authoritative +source. + +A process that opens a gdbm file is designated as a "reader" or a +"writer". Only one writer may open a gdbm file and many readers may +open the file. Readers and writers can not open the gdbm file at the +same time. The procedure for opening a gdbm file is: + +.BI "GDBM_FILE gdbm_open (const char *" name ", int " block_size ", " +.ti +21 +.BI "int " flags ", int " mode ", " +.ti +21 +.BI "void (*" fatal_func ")(const char *))"; + +\fIName\fR is the name of the file (the complete name, +gdbm does not append any characters to this name). \fIBlock_size\fR is +the size of a single transfer from disk to memory. This parameter is +ignored unless the file is a new file. The minimum size is 512. If +it is less than 512, dbm will use the stat block size for the file system. +\fIRead_write\fR can have one of the following values: +.TP +.B GDBM_READER +reader +.TP +.B GDBM_WRITER +writer +.TP +.B GDBM_WRCREAT +writer - if database does not exist create new one +.TP +.B GDBM_NEWDB +writer - create new database regardless if one exists +.PP +The \fBGDBM_NOMMAP\fR added to \fIread_write\fR by bitwise or instructs +\fBgdbm_open\fR to disable the use of +.BR mmap (2). +.PP +For the last three (writers of the database) the following may be added +added to \fIread_write\fR by bitwise or: +.TP +.B GDBM_SYNC +Causes all database operations to be synchronized to the disk, +.TP +.B GDBM_NOLOCK +Pevents the library from performing any locking on the database file. +.PP +The option +.B GDBM_FAST +is now obsolete, since gdbm defaults to no-sync mode. +.PP +\fIMode\fR is the file mode (see \fBchmod(2)\fR and \fBopen(2)\fR) if the +file is created. \fI(*Fatal_func) ()\fR is a function for dbm to call +if it detects a fatal error. The only parameter of this function is a string. +If the value of 0 is provided, \fBgdbm\fR will use a default function. + +The return value is the pointer needed by all other routines to +access that gdbm file. If the return is the NULL pointer, \fBgdbm_open\fR +was not successful. The errors can be found in \fIgdbm_errno\fR for gdbm +errors and in \fIerrno\fR for system errors. (For error codes, see +gdbmerrno.h.) + +In all of the following calls, the parameter \fIdbf\fR refers to the pointer +returned from \fBgdbm_open\fR. + +It is important that every file opened is also closed. This is needed to +update the reader/writer count on the file. This is done by: + +.BI "void gdbm_close (GDBM_FILE " dbf ");" + +The database is used by 3 primary routines. The first stores data in the +database. + +.BI "int gdbm_store (GDBM_FILE " dbf ", datum " key ", datum " content ", int " flag ); + +\fIDbf\fR is the pointer returned by \fBgdbm_open\fR. \fIKey\fR is the +key data. \fIContent\fR is the data to be associated with the \fIkey\fR. +\fIFlag\fR can have one of the following values: +.TP +.B GDBM_INSERT +Insert only, generate an error if key exists; +.TP +.B GDBM_REPLACE +Replace contents if key exists. +.PP +If a reader calls \fBgdbm_store\fR, the return value will be -1. +If called with \fBGDBM_INSERT\fR and \fIkey\fR is in the database, the return +value will be 1. Otherwise, the return value is 0. + +\fINOTICE: If you store data for a key that is already in the data base, +\fBgdbm\fI replaces the old data with the new data if called with \fBGDBM_REPLACE\fI. +You do not get two data items for the same key and you do not get an +error from \fBgdbm_store\fI. + +NOTICE: The size in \fBgdbm\fI is not restricted like in \fBdbm\fI or \fBndbm\fI. Your data +can be as large as you want.\fR + +To search for some data, use: + +.BI "datum gdbm_fetch (GDBM_FILE " dbf ", datum " key ); + +\fIDbf\fR is the pointer returned by \fBgdbm_open\fR. \fIKey\fR is +the key data. + +If the \fIdptr\fR element of the return value is NULL, no data was +found. Otherwise the return value is a pointer to the found data. +The storage space for the \fIdptr\fR element is allocated using +\fBmalloc(3)\fR. \fBGdbm\fI does not automatically free this data. +It is the programmer's responsibility to free this storage when it is +no longer needed. + +To search for some data, without retrieving it: + +.BI "int gdbm_exists (GDBM_FILE " dbf ", datum " key ); + +\fIDbf\fR is the pointer returned by \fBgdbm_open\fR. \fIKey\fR is +the key data to search for. + +If the \fIkey\fR is found within the database, the return value +will be true. If nothing appropiate is found, false is returned. +This routine is useful for checking for the existence of a record, +without performing the memory allocation done by \fBgdbm_fetch\fR. +.PP +To remove some data from the database: + +.BI "int gdbm_delete (GDBM_FILE " dbf ", datum " key ); + +\fIDbf\fR is the pointer returned by \fBgdbm_open\fR. \fIKey\fR is the +key data. + +The return value is -1 if the item is not present or the requester is a reader. +The return value is 0 if there was a successful delete. + +The next two routines allow for accessing all items in the database. This +access is not key sequential, but it is guaranteed to visit every key in +the database once. (The order has to do with the hash values.) + +.BI "datum gdbm_firstkey (GDBM_FILE " dbf ");" +.br +.BI "datum gdbm_nextkey (GDBM_FILE " dbf ", datum " key ); + +\fIDbf\fR is the pointer returned by \fBgdbm_open\fR. \fIKey\fR is the +key data. + +The return values are both of type \fBdatum\fR. If the \fIdptr\fR +element of the return value is NULL, there is no first key or next key. +Again notice that \fIdptr\fR points to data allocated by \fBmalloc(3)\fR +and \fBgdbm\fR will not free it for you. + +These functions were intended to visit the database in read-only algorithms, +for instance, to validate the database or similar operations. + +File `visiting' is based on a `hash table'. \fIgdbm_delete\fR re-arranges the +hash table to make sure that any collisions in the table do not leave some item +`un-findable'. The original key order is NOT guaranteed to remain unchanged in +ALL instances. It is possible that some key will not be visited if a loop like +the following is executed: +.sp +.nf +.in +5 +key = gdbm_firstkey (dbf); +while (key.dptr) + { + nextkey = gdbm_nextkey (dbf, key); + if (some condition) + gdbm_delete ( dbf, key ); + free (key.dptr); + key = nextkey; + } +.in +.fi +.PP +The following routine should be used very infrequently. + +.BI "int gdbm_reorganize (GDBM_FILE " dbf ");" + +If you have had a lot of deletions and would like to shrink the space +used by the \fBgdbm\fR file, this routine will reorganize the database. +\fBGdbm\fR will not shorten the length of a \fBgdbm\fR file except by +using this reorganization. (Deleted file space will be reused.) + +Unless your database was opened with the \fBGDBM_SYNC\fR flag, \fBgdbm\fR does not +wait for writes to be flushed to the disk before continuing. +The following routine can be used to guarantee that the database is +physically written to the disk file. + +.BI "void gdbm_sync (GDBM_FILE " dbf ");" + +It will not return until the disk file state is syncronized with the +in-memory state of the database. + +To convert a \fBgdbm\fR error code into English text, use this routine: + +.BI "const char *gdbm_strerror (gdbm_error " errno ); + +\fBGdbm\fR now supports the ability to set certain options on an +already open database. + +.BI "int gdbm_setopt (GDBM_FILE " dbf ", int " option ", int " value ", int " size ); + +Where \fIdbf\fR is the return value from a previous call to \fBgdbm_open\fR, +and \fIoption\fR specifies which option to set. The valid options are +currently: +.TP +.B GDBM_CACHESIZE +Set the size of the internal bucket cache. This option may only be set once +on each \fIGDBM_FILE\fR descriptor, and is set automatically to 100 upon the +first access to the database. +.TP +.B GDBM_FASTMODE + Set \fBfast mode\fR to either on or off. This allows \fBfast mode\fR to +be toggled on an already open and active database. \fIvalue\fR (see below) +should be set to either TRUE or FALSE. \fIThis option is now obsolete.\fR +.TP +.B GDBM_SYNCMODE +Turn on or off file system synchronization operations. This setting defaults +to off; \fIvalue\fR (see below) should be set to either TRUE or FALSE. +.TP +.B GDBM_CENTFREE +Set \fBcentral free block pool\fR to either on or off. +The default is off, which is how previous versions of \fBGdbm\fR +handled free blocks. If set, this option causes all subsequent free +blocks to be placed in the \fBglobal\fR pool, allowing (in thoery) +more file space to be reused more quickly. \fIvalue\fR (see below) should +be set to either TRUE or FALSE. +\fINOTICE: This feature is still under study.\fR +.TP +.B GDBM_COALESCEBLKS +Set \fBfree block merging\fR to either on or off. +The default is off, which is how previous versions of \fBGdbm\fR +handled free blocks. If set, this option causes adjacent free blocks +to be merged. This can become a CPU expensive process with time, though, +especially if used in conjunction with \fBGDBM_CENTFREE\fR. \fIvalue\fR +(see below) should be set to either TRUE or FALSE. +\fINOTICE: This feature is still under study.\fR +.PP +\fIvalue\fR is the value to set \fIoption\fR to, specified as an integer +pointer. \fIsize\fR is the size of the data pointed to by \fIvalue\fR. +The return value will be -1 upon failure, or 0 upon success. The global +variable \fIgdbm_errno\fR will be set upon failure. + +For instance, to set a database to use a cache of 10, after opening it +with \fBgdbm_open\fR, but prior to accessing it in any way, the following +code could be used: +.sp +.nf +.in +5 +int value = 10; + +ret = gdbm_setopt( dbf, GDBM_CACHESIZE, &value, sizeof(int)); +.in +.fi +.PP +If the database was opened with the \fBGDBM_NOLOCK\fR flag, the user may +wish to perform their own file locking on the database file in order to +prevent multiple writers operating on the same file simultaneously. + +In order to support this, the \fIgdbm_fdesc\fR routine is provided. + +.BI "int gdbm_fdesc (GDBM_FILE " dbf ); + +Where \fIdbf\fR is the return value from a previous call to \fBgdbm_open\fR. +The return value will be the file descriptor of the database. + +The following two external variables may be useful: + +\fIgdbm_errno\fR is the variable that contains more information about +gdbm errors. (gdbm.h has the definitions of the error values and +defines gdbm_errno as an external variable.) + +\fIgdbm_version\fR is the string containing the version information. + +There are a few more things of interest. First, \fBgdbm\fR files are +not "sparse". You can copy them with the UNIX \fBcp(1)\fR command and +they will not expand in the copying process. Also, there is a +compatibility mode for use with programs that already use UNIX +\fBdbm\fR. In this compatibility mode, no \fRgdbm\fR file pointer is +required by the programmer, and only one file may be opened at a time. +All users in compatibility mode are assumed to be writers. If the +\fBgdbm\fR file is a read only, it will fail as a writer, but will +also try to open it as a reader. All returned pointers in datum +structures point to data that \fBgdbm\fR WILL free. They should be +treated as static pointers (as standard UNIX \fBdbm\fR does). +.SH LINKING +This library is accessed by specifying \fI-lgdbm\fR as the last +parameter to the compile line, e.g.: +.sp +.nf +.in +5 +gcc -o prog prog.c -lgdbm +.in +.fi +.PP +If you wish to use the \fBdbm\fR or \fBndbm\fR compatibility routines, +you must link in the \fIgdbm_compat\fR library as well. For example: +.sp +.nf +.in +5 +gcc -o prog proc.c -lgdbm -lgdbm_compat +.in +.fi +.\" .SH BUGS + +.SH "BUG REPORTS" +Send bug reports to . +.SH "SEE ALSO" +dbm, ndbm +.SH AUTHOR +by Philip A. Nelson, Jason Downs and Sergey Poznyakoff. +.SH COPYRIGHT +Copyright \(co 1990 - 2011 Free Software Foundation, Inc. + +GDBM is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 1, or (at your option) +any later version. + +GDBM is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GDBM. If not, see +.SH CONTACTS +You may contact the original author by: +.br + e-mail: phil@cs.wwu.edu +.br + us-mail: Philip A. Nelson +.br +Computer Science Department +.br +Western Washington University +.br +Bellingham, WA 98226 + +You may contact the current maintainers by: +.br + e-mail: downsj@downsj.com +.br +and + e-mail: gray@gnu.org + +.\" Local variables: +.\" eval: (add-hook 'write-file-hooks 'time-stamp) +.\" time-stamp-start: ".TH GDBM 3 \"" +.\" time-stamp-format: "%:B %:d, %:y" +.\" time-stamp-end: "\"" +.\" time-stamp-line-limit: 20 +.\" end: diff --git a/doc/gdbm.info b/doc/gdbm.info new file mode 100644 index 0000000..5cea73e --- /dev/null +++ b/doc/gdbm.info @@ -0,0 +1,2327 @@ +This is gdbm.info, produced by makeinfo version 4.13 from gdbm.texinfo. + +INFO-DIR-SECTION Programming & development tools +START-INFO-DIR-ENTRY +* GDBM: (gdbm). The GNU database manager. +END-INFO-DIR-ENTRY + + This file documents the GNU dbm utility. + + Copyright (C) 1989-1999, 2007, 2008, 2009-2011 Free Software +Foundation, Inc. + + Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, with the Front-Cover Texts being "The GNU Database +Manager," and with the Back-Cover Texts as in (a) below. A copy of the +license is included in the section entitled "GNU Free Documentation +License." + + (a) The FSF's Back-Cover Text is: "You have the freedom to copy and +modify this GNU manual. Buying copies from the FSF supports it in +developing GNU and promoting software freedom." + + +File: gdbm.info, Node: Top, Next: Copying, Up: (dir) + +The GNU database manager. +************************* + +GNU `dbm' is a library of functions implementing a hashed database on a +disk file. This manual documents GNU `dbm' Version 1.10 (`gdbm'). The +software was originally written by Philip A. Nelson. This document +was originally written by Pierre Gaumond from texts written by Phil. + +* Menu: + +Introduction: + +* Copying:: Your rights. +* Intro:: Introduction to GNU dbm. +* List:: List of functions. + +Functions: + +* Open:: Opening the database. +* Close:: Closing the database. +* Store:: Inserting and replacing records in the database. +* Fetch:: Searching records in the database. +* Delete:: Removing records from the database. +* Sequential:: Sequential access to records. +* Reorganization:: Database reorganization. +* Sync:: Insure all writes to disk have competed. +* Flat files:: Export and import to Flat file format. +* Errors:: Convert internal error codes into English. +* Options:: Setting internal options. +* Locking:: File locking. + +Programs + +* testgdbm:: Test and modify a GDBM database. +* gdbmexport:: Export a database into a portable format. + +Other topics: + +* Error codes:: Error codes returned by `gdbm' calls. +* Variables:: Two useful variables. +* Compatibility:: Compatibility with UNIX dbm and ndbm. +* Bugs:: Problems and bugs. +* Resources:: Additional resources, + +* GNU Free Documentation License:: Document license. +* Index:: Index + + +File: gdbm.info, Node: Copying, Next: Intro, Prev: Top, Up: Top + +1 Copying Conditions. +********************* + +This library is "free"; this means that everyone is free to use it and +free to redistribute it on a free basis. GNU `dbm' (`gdbm') is not in +the public domain; it is copyrighted and there are restrictions on its +distribution, but these restrictions are designed to permit everything +that a good cooperating citizen would want to do. What is not allowed +is to try to prevent others from further sharing any version of `gdbm' +that they might get from you. + + Specifically, we want to make sure that you have the right to give +away copies `gdbm', that you receive source code or else can get it if +you want it, that you can change these functions or use pieces of them +in new free programs, and that you know you can do these things. + + To make sure that everyone has such rights, we have to forbid you to +deprive anyone else of these rights. For example, if you distribute +copies `gdbm', you must give the recipients all the rights that you +have. You must make sure that they, too, receive or can get the source +code. And you must tell them their rights. + + Also, for our own protection, we must make certain that everyone +finds out that there is no warranty for anything in the `gdbm' +distribution. If these functions are modified by someone else and +passed on, we want their recipients to know that what they have is not +what we distributed, so that any problems introduced by others will not +reflect on our reputation. + + `Gdbm' is currently distributed under the terms of the GNU General +Public License, Version 3. (_NOT_ under the GNU General Library Public +License.) A copy the GNU General Public License is included with the +distribution of `gdbm'. + + +File: gdbm.info, Node: Intro, Next: List, Prev: Copying, Up: Top + +2 Introduction to GNU `dbm'. +**************************** + +GNU `dbm' (`gdbm') is a library of database functions that use +extensible hashing and works similar to the standard UNIX `dbm' +functions. These routines are provided to a programmer needing to +create and manipulate a hashed database. (`gdbm' is _NOT_ a complete +database package for an end user.) + + The basic use of `gdbm' is to store key/data pairs in a data file. +Each key must be unique and each key is paired with only one data item. +The keys can not be directly accessed in sorted order. The basic unit +of data in `gdbm' is the structure: + + typedef struct { + char *dptr; + int dsize; + } datum; + + This structure allows for arbitrary sized keys and data items. + + The key/data pairs are stored in a `gdbm' disk file, called a `gdbm' +database. An application must open a `gdbm' database to be able +manipulate the keys and data contained in the database. `gdbm' allows +an application to have multiple databases open at the same time. When +an application opens a `gdbm' database, it is designated as a `reader' +or a `writer'. A `gdbm' database can be opened by at most one writer +at a time. However, many readers may open the database simultaneously. +Readers and writers can not open the `gdbm' database at the same time. + + +File: gdbm.info, Node: List, Next: Open, Prev: Intro, Up: Top + +3 List of functions. +******************** + +The following is a quick list of the functions contained in the `gdbm' +library. The include file `gdbm.h', that can be included by the user, +contains a definition of these functions. + + #include + + GDBM_FILE gdbm_open(name, block_size, flags, mode, fatal_func); + void gdbm_close(dbf); + int gdbm_store(dbf, key, content, flag); + datum gdbm_fetch(dbf, key); + int gdbm_delete(dbf, key); + datum gdbm_firstkey(dbf); + datum gdbm_nextkey(dbf, key); + int gdbm_reorganize(dbf); + void gdbm_sync(dbf); + int gdbm_exists(dbf, key); + char *gdbm_strerror(errno); + int gdbm_setopt(dbf, option, value, size); + int gdbm_fdesc(dbf); + + The `gdbm.h' include file is often in the `/usr/local/include' +directory. (The actual location of `gdbm.h' depends on your local +installation of `gdbm'.) + + +File: gdbm.info, Node: Open, Next: Close, Prev: List, Up: Top + +4 Opening the database. +*********************** + + -- gdbm interface: GDBM_FILE gdbm_open (const char *NAME, int + BLOCK_SIZE, int FLAGS, int MODE, void (*fatal_func)(const + char *)) + Initializes `gdbm' system. If the file has a size of zero bytes, + a file initialization procedure is performed, setting up the + initial structure in the file. + + The arguments are: + + NAME + The name of the file (the complete name, `gdbm' does not + append any characters to this name). + + BLOCK_SIZE + It is used during initialization to determine the size of + various constructs. It is the size of a single transfer from + disk to memory. This parameter is ignored if the file has + been previously initialized. The minimum size is 512. If + the value is less than 512, the file system block size is + used, otherwise the value of BLOCK_SIZE is used. + + FLAGS + If `flags' is set to `GDBM_READER', the user wants to just + read the database and any call to `gdbm_store' or + `gdbm_delete' will fail. Many readers can access the + database at the same time. If `flags' is set to + `GDBM_WRITER', the user wants both read and write access to + the database and requires exclusive access. If `flags' is set + to `GDBM_WRCREAT', the user wants both read and write access + to the database and wants it created if it does not already + exist. If `flags' is set to `GDBM_NEWDB', the user want a + new database created, regardless of whether one existed, and + wants read and write access to the new database. + + The following may also be logically or'd into the database + flags: `GDBM_SYNC', which causes all database operations to be + synchronized to the disk, `GDBM_NOLOCK', which prevents the + library from performing any locking on the database file, and + `GDBM_NOMMAP', which disables the memory mapping mechanism. + The option `GDBM_FAST' is now obsolete, since `gdbm' defaults + to no-sync mode. + + If the host `open' call (*note open: (open(2))open.) + supports the `O_CLOEXEC' flag, the `GDBM_CLOEXEC' can be or'd + into the flags, to enable the close-on-exec flag for the + database file descriptor. + + MODE + File mode (see *note change permissions of a file: + (chmod(2))chmod, and *note open a file: (open(2))open.), + which is used if the file is created). + + FATAL_FUNC + A function for `gdbm' to call if it detects a fatal error. + The only parameter of this function is a string. If the + value of `NULL' is provided, `gdbm' will use a default + function. + + The return value, is the pointer needed by all other functions to + access that `gdbm' file. If the return is the `NULL' pointer, + `gdbm_open' was not successful. The errors can be found in + `gdbm_errno' variable (*note gdbm_errno: Variables.). Available + error codes are discussed in *note Error codes::. + + In all of the following calls, the parameter DBF refers to the + pointer returned from `gdbm_open'. + + +File: gdbm.info, Node: Close, Next: Store, Prev: Open, Up: Top + +5 Closing the database. +*********************** + +It is important that every file opened is also closed. This is needed +to update the reader/writer count on the file: + + -- gdbm interface: void gdbm_close (GDBM_FILE DBF) + This function closes the `gdbm' file and frees all memory + associated with it. The parameter is: + + DBF + The pointer returned by `gdbm_open'. + + +File: gdbm.info, Node: Store, Next: Fetch, Prev: Close, Up: Top + +6 Inserting and replacing records in the database. +************************************************** + + -- gdbm interface: int gdbm_store (GDBM_FILE DBF, datum KEY, datum + CONTENT, int FLAG) + The function `gdbm_store' inserts or replaces records in the + database. + + The parameters are: + + DBF + The pointer returned by `gdbm_open'. + + KEY + The search key. + + CONTENT + The data to be associated with the key. + + FLAG + Defines the action to take when the key is already in the + database. The value `GDBM_REPLACE' (defined in `gdbm.h') + asks that the old data be replaced by the new CONTENT. The + value `GDBM_INSERT' asks that an error be returned and no + action taken if the KEY already exists. + + This function can return the following values: + + -1 + The item was not stored in the database because the caller + was not an official writer or either KEY or CONTENT have a + `NULL' `dptr' field. + + Both KEY and CONTENT must have the `dptr' field be a + non-`NULL' value. Since a `NULL' `dptr' field is used by + other functions to indicate an error, it cannot be valid data. + + +1 + The item was not stored because the argument FLAG was + `GDBM_INSERT' and the KEY was already in the database. + + 0 + No error. The value of CONTENT is keyed by KEY. The file on + disk is updated to reflect the structure of the new database + before returning from this function. + +If you store data for a KEY that is already in the data base, `gdbm' +replaces the old data with the new data if called with `GDBM_REPLACE'. +You do not get two data items for the same `key' and you do not get an +error from `gdbm_store'. + + The size in `gdbm' is not restricted like `dbm' or `ndbm'. Your +data can be as large as you want. + + +File: gdbm.info, Node: Fetch, Next: Delete, Prev: Store, Up: Top + +7 Searching for records in the database. +**************************************** + + -- gdbm interface: datum gdbm_fetch (GDBM_FILE DBF, datum KEY) + Looks up a given KEY and returns the information associated with + it. The `dptr' field in the structure that is returned points to a + memory block allocated by `malloc'. It is the caller's + responsibility to free it when no longer needed. + + If the `dptr' is `NULL', no data was found. + + The parameters are: + + DBF + The pointer returned by `gdbm_open'. + + KEY + The search key. + +An example of using this function: + + content = gdbm_fetch (dbf, key); + if (content.dptr == NULL) + { + fprintf(stderr, "key not found\n"); + } + else + { + /* do something with content.dptr */ + } + + You may also search for a particular key without retrieving it: + + -- gdbm interface: int gdbm_exists (GDBM_FILE DBF, datum KEY) + Returns `true' (`1') if the KEY exists in DBF and `false' (`0') + otherwise. + + The parameters are: + + DBF + The pointer returned by `gdbm_open'. + + KEY + The search key. + + +File: gdbm.info, Node: Delete, Next: Sequential, Prev: Fetch, Up: Top + +8 Removing records from the database. +************************************* + +To remove some data from the database, use the `gdbm_delete' function. + + -- gdbm interface: int gdbm_delete (GDBM_FILE DBF, datum KEY) + Deletes the data associated with the given KEY, if it exists in + the database DBF. The file on disk is updated to reflect the + structure of the new database before returning from this function. + + The parameters are: + + DBF + The pointer returned by `gdbm_open'. + + DATUM KEY + The search key. + + The function returns `-1' if the item is not present or the + requester is a reader. The return of `0' marks a successful + delete. + + +File: gdbm.info, Node: Sequential, Next: Reorganization, Prev: Delete, Up: Top + +9 Sequential access to records. +******************************* + +The next two functions allow for accessing all items in the database. +This access is not `key' sequential, but it is guaranteed to visit every +`key' in the database once. The order has to do with the hash values. +`gdbm_firstkey' starts the visit of all keys in the database. +`gdbm_nextkey' finds and reads the next entry in the hash structure for +`dbf'. + + -- gdbm interface: datum gdbm_firstkey (GDBM_FILE DBF) + Initiate sequential access to the database DBF. The returned + value is the first key accessed in the database. If the `dptr' + field in the returned datum is `NULL', the database contains no + data. + + Otherwise, `dptr' points to a memory block obtained from `malloc', + which holds the key value. The caller is responsible for freeing + this memory block when no longer needed. + + -- gdbm interface: datum gdbm_nextkey (GDBM_FILE DBF, datum PREV) + This function continues the iteration over the keys in DBF, + initiated by `gdbm_firstkey'. The parameter PREV holds the value + returned from a previous call to `gdbm_nextkey' or `gdbm_firstkey'. + + The function returns next key from the database. If the `dptr' + field in the returned datum is `NULL', all keys in the database + has been visited. + + Otherwise, `dptr' points to a memory block obtained from `malloc', + which holds the key value. The caller is responsible for freeing + this memory block when no longer needed. + + These functions were intended to visit the database in read-only +algorithms, for instance, to validate the database or similar +operations. The usual algorithm for sequential access is: + + key = gdbm_firstkey (dbf); + while (key.dptr) + { + datum nextkey; + + /* do something with the key */ + ... + + /* Obtain the next key */ + nextkey = gdbm_nextkey (dbf, key); + /* Reclaim the memory used by the key */ + free (key.dptr); + /* Use nextkey in the next iteration. */ + key = nextkey; + } + + Care should be taken when the `gdbm_delete' function is used in such +a loop. File visiting is based on a "hash table". The `gdbm_delete' +function re-arranges the hash table to make sure that any collisions in +the table do not leave some item "un-findable". The original key order +is _not_ guaranteed to remain unchanged in all instances. So it is +possible that some key will not be visited if a loop like the following +is executed: + + key = gdbm_firstkey (dbf); + while (key.dptr) + { + datum nextkey; + if (some condition) + { + gdbm_delete (dbf, key); + } + nextkey = gdbm_nextkey (dbf, key); + free (key.dptr); + key = nextkey; + } + + +File: gdbm.info, Node: Reorganization, Next: Sync, Prev: Sequential, Up: Top + +10 Database reorganization. +*************************** + +The following function should be used very seldom. + + -- gdbm interface: int gdbm_reorganize (GDBM_FILE DBF) + Reorganizes the database. + + The parameter is: + + DBF + The pointer returned by `gdbm_open'. + + If you have had a lot of deletions and would like to shrink the space +used by the `gdbm' file, this function will reorganize the database. +This results, in particular, in shortening the length of a `gdbm' file +by removing the space occupied by deleted records. + + This reorganization requires creating a new file and inserting all +the elements in the old file DBF into the new file. The new file is +then renamed to the same name as the old file and DBF is updated to +contain all the correct information about the new file. If an error is +detected, the return value is negative. The value zero is returned +after a successful reorganization. + + +File: gdbm.info, Node: Sync, Next: Flat files, Prev: Reorganization, Up: Top + +11 Database Synchronization +*************************** + +Unless your database was opened with the `GDBM_SYNC' flag, `gdbm' does +not wait for writes to be flushed to the disk before continuing. This +allows for faster writing of databases at the risk of having a +corrupted database if the application terminates in an abnormal +fashion. The following function allows the programmer to make sure the +disk version of the database has been completely updated with all +changes to the current time. + + -- gdbm interface: void gdbm_sync (GDBM_FILE DBF) + Synchronizes the changes in DBF with its disk file. The parameter + is a pointer returned by `gdbm_open'. + + This function would usually be called after a complete set of + changes have been made to the database and before some long + waiting time. The `gdbm_close' function automatically calls the + equivalent of `gdbm_sync' so no call is needed if the database is + to be closed immediately after the set of changes have been made. + + +File: gdbm.info, Node: Flat files, Next: Errors, Prev: Sync, Up: Top + +12 Export and Import +******************** + +`Gdbm' databases can be converted into a portable "flat format". This +format can be used, for example, to migrate between the different +versions of `gdbm' databases. Generally speaking, flat files are safe +to send over the network, and can be used to recreate the database on +another machine. The recreated database is guaranteed to be a +byte-to-byte equivalent of the database from which the flat file was +created. This does not necessarily mean, however, that this file can +be used in the same way as the original one. For example, if the +original database contained non-ASCII data (e.g. C structures, +integers etc.), the recreated database can be of any use only if the +target machine has the same integer size and byte ordering as the +source one and if its C compiler uses the same packing conventions as +the one which generated C which populated the original database. In +general, such binary databases are not portable between machines, +unless you follow some stringent rules on what data is written to them +and how it is interpreted. + + -- gdbm interface: int gdbm_export (GDBM_FILE DBF, const char + *EXPORTFILE, int FLAG, int MODE) + Create a flat file from the `gdbm' database. The parameters are: + + DBF + A pointer to the source database, returned by a call to + `gdbm_open'. The database must be open in `GDBM_WRITER' mode. + + EXPORTFILE + The name of the output file. + + FLAG + How to create the output file. If FLAG is `GDBM_WRCREAT', + the file will be created if it does not exist already. + Otherwise, if it is `GDBM_NEWDB', it will be created if it + does not exist, and truncated otherwise. + + MODE + The permissions to use when creating the output file. See + *note open a file: (open(2))open, for a detailed discussion. + + -- gdbm interface: int gdbm_import (GDBM_FILE DBF, const char + *IMPORTFILE, int FLAG) + Populates the database from an existing flat file. + + DBF + A pointer to the source database, returned by a call to + `gdbm_open'. The database must be open in `GDBM_WRITER' mode. + + IMPORTFILE + The name of the input flat file. The file must exist. + + FLAG + The FLAG argument to be passed to `gdbm_store' function when + adding new records. *Note Store::, for a description of its + effect. + + See also *note gdbmexport::, *note testgdbm export::, and *note +testgdbm import::. + + +File: gdbm.info, Node: Errors, Next: Options, Prev: Flat files, Up: Top + +13 Error strings. +***************** + +To convert a `gdbm' error code into English text, use this routine: + + -- gdbm interface: const char * gdbm_strerror (gdbm_error ERRNO) + Converts ERRNO (which is an integer value) into a human-readable + descriptive text. Returns a pointer to a static string. The + caller must not alter or free the returned pointer. + + The ERRNO argument is usually the value of the global variable + `gdbm_errno'. *Note gdbm_errno: Variables. + + +File: gdbm.info, Node: Options, Next: Locking, Prev: Errors, Up: Top + +14 Setting options +****************** + +`Gdbm' supports the ability to set certain options on an already open +database. + + -- gdbm interface: int gdbm_setopt (GDBM_FILE DBF, int OPTION, void + *VALUE, int SIZE) + Sets an option on the database or returns the value of an option. + + The parameters are: + + DBF + The pointer returned by `gdbm_open'. + + OPTION + The option to be set or retreived. + + VALUE + A pointer to the value to which OPTION will be set or where to + place the option value (depending on the option). + + SIZE + The length of the data pointed to by VALUE. + + The valid options are: + +GDBM_SETCACHESIZE +GDBM_CACHESIZE + Set the size of the internal bucket cache. This option may only be + set once on each GDBM_FILE descriptor, and is set automatically to + 100 upon the first access to the database. The VALUE should point + to a `size_t' holding the desired cache size. + + The `GDBM_CACHESIZE' option is provided for compatibility with + earlier versions. + +GDBM_GETCACHESIZE + Return the size of the internal bucket cache. The VALUE should + point to a `size_t' variable, where the size will be stored. + +GDBM_GETFLAGS + Return the flags describing the state of the database. The VALUE + should point to a `int' variable where to store the flags. The + return is the same as the flags used when opening the database + (*note gdbm_open: Open.), except that it reflects the current + state (which may have been altered by another calls to + `gdbm_setopt'. + +GDBM_FASTMODE + Enable or disable the "fast writes mode", i.e. writes without + subsequent synchronization. The VALUE should point to an integer: + `TRUE' to enable fast mode, and `FALSE' to disable it. + + This option is retained for compatibility with previous versions of + `gdbm'. Its effect is the reverse of `GDBM_SETSYNCMODE' (see + below). + +GDBM_SETSYNCMODE +GDBM_SYNCMODE + Turn on or off file system synchronization operations. This + setting defaults to off. The VALUE should point to an integer: + `TRUE' to turn synchronization on, and `FALSE' to turn it off. + + Note, that this option is a reverse of `GDBM_FASTMODE', i.e. + calling `GDBM_SETSYNCMODE' with `TRUE' has the same effect as + calling `GDBM_FASTMODE' with `FALSE'. + + The `GDBM_SYNCMODE' option is provided for compatibility with + earlier versions. + +GDBM_GETSYNCMODE + Return the current synchronization status. The VALUE should point + to an `int' where the status will be stored. + +GDBM_SETCENTFREE +GDBM_CENTFREE + _NOTICE: This feature is still under study._ + + Set central free block pool to either on or off. The default is + off, which is how previous versions of `gdbm' handled free blocks. + If set, this option causes all subsequent free blocks to be placed + in the _global_ pool, allowing (in theory) more file space to be + reused more quickly. The VALUE should point to an integer: `TRUE' + to turn central block pool on, and `FALSE' to turn it off. + + The `GDBM_CENTFREE' option is provided for compatibility with + earlier versions. + +GDBM_SETCOALESCEBLKS +GDBM_COALESCEBLKS + _NOTICE: This feature is still under study._ + + Set free block merging to either on or off. The default is off, + which is how previous versions of `gdbm' handled free blocks. If + set, this option causes adjacent free blocks to be merged. This + can become a CPU expensive process with time, though, especially if + used in conjunction with GDBM_CENTFREE. The VALUE should point to + an integer: `TRUE' to turn free block merging on, and `FALSE' to + turn it off. + +GDBM_GETCOALESCEBLKS + Return the current status of free block merging. The VALUE should + point to an `int' where the status will be stored. + +GDBM_SETMAXMAPSIZE + Sets maximum size of a memory mapped region. The VALUE should + point to a value of type `size_t', `unsigned long' or `unsigned'. + The actual value is rounded to the nearest page boundary (the page + size is obtained from `sysconf(_SC_PAGESIZE)'). + +GDBM_GETMAXMAPSIZE + Return the maximum size of a memory mapped region. The VALUE + should point to a value of type `size_t' where to return the data. + +GDBM_SETMMAP + Enable or disable memory mapping mode. The VALUE should point to + an integer: `TRUE' to enable memory mapping or `FALSE' to disable + it. + +GDBM_GETMMAP + Check whether memory mapping is enabled. The VALUE should point + to an integer where to return the status. + +GDBM_GETDBNAME + Return the name of the database disk file. The VALUE should point + to a variable of type `char**'. A pointer to the newly allocated + copy of the file name will be placed there. The caller is + responsible for freeing this memory when no longer needed. For + example: + + char *name; + + if (gdbm_setopt (dbf, GDBM_GETDBNAME, &name, sizeof (name))) + { + fprintf (stderr, "gdbm_setopt failed: %s\n", + gdbm_strerror (gdbm_errno)); + } + else + { + printf ("database name: %s\n", name); + free (name); + } + + + The return value will be `-1' upon failure, or `0' upon success. +The global variable `gdbm_errno' will be set upon failure. + + For instance, to set a database to use a cache of 10, after opening +it with `gdbm_open', but prior to accessing it in any way, the following +code could be used: + + int value = 10; + ret = gdbm_setopt (dbf, GDBM_CACHESIZE, &value, sizeof (int)); + + +File: gdbm.info, Node: Locking, Next: testgdbm, Prev: Options, Up: Top + +15 File Locking. +**************** + +With locking disabled (if `gdbm_open' was called with `GDBM_NOLOCK'), +the user may want to perform their own file locking on the database file +in order to prevent multiple writers operating on the same file +simultaneously. + + In order to support this, the `gdbm_fdesc' routine is provided. + + -- gdbm interface: int gdbm_fdesc (GDBM_FILE DBF) + Returns the file descriptor of the database DBF. This value can + be used as an argument to `flock', `lockf' or similar calls. + + +File: gdbm.info, Node: testgdbm, Next: gdbmexport, Prev: Locking, Up: Top + +16 Test and modify a GDBM database. +*********************************** + +The `testgdbm' utility allows you to view and modify an existing GDBM +database or to create a new one. + + When invoked without options, it tries to open a database file called +`junk.gdbm', located in the current working directory. You can change +this default using the `-g' command line option. This option takes a +single argument, specifying the file name to open, e.g.: + + $ testgdbm -g file.db + + The database will be opened in read-write mode, unless the `-r' +option is specified, in which case it will be opened only for reading. + + If the database does not exist, `testgdbm' will create it. There is +a special option `-n', which instructs the utility to create a new +database. If it is used and if the database already exists, it will be +deleted, so use it sparingly. + +* Menu: + +* invocation:: +* shell:: + + +File: gdbm.info, Node: invocation, Next: shell, Up: testgdbm + +16.1 testgdbm invocation +======================== + +The following table summarizes all `testgdbm' command line options: + +`-b SIZE' + Set block size. + +`-c SIZE' + Set cache size. + +`-g FILE' + Operate on FILE instead of the default `junk.gdbm'. + +`-h' + Print a concise help summary. + +`-n' + Create the database. + +`-r' + Open the database in read-only mode. + +`-s' + Synchronize to the disk after each write. + +`-v' + Print program version and licensing information and exit. + + +File: gdbm.info, Node: shell, Prev: invocation, Up: testgdbm + +16.2 testgdbm interactive mode +============================== + +After successful startup, `testgdbm' starts a loop, in which it reads +commands from the user, executes them and prints the results on the +standard output. If the standard input is attached to a console, +`testgdbm' runs in interactive mode, which is indicated by its "prompt": + + testgdbm> _ + + The utility finishes when it reads the `quit' command (see below) or +detects end-of-file on its standard input, whichever occurs first. + + A `testgdbm' command consists of a "command verb", optionally +followed by one or two "arguments", separated by any amount of white +space. A command verb can be entered either in full or in an +abbreviated form, as long as that abbreviation does not match any other +verb. For example, `co' can be used instead of `count' and `ca' +instead of `cache'. Furthermore, many command verbs also have +single-letter forms, called "command letters". + + An argument is any sequence of non-whitespace characters. Notice, +that currently there is no way to enter arguments containing white +space. This limitation will be removed in future releases. + + Each command takes at most two "formal parameters", which can be +optional or mandatory. If the number of actual arguments is less than +the number of mandatory parameters, `testgdbm' will prompt you to +supply missing arguments. For example, the `store' command takes two +mandatory parameters, so if you invoked it with no arguments, you would +be prompted twice to supply the necessary data, as shown in example +below: + + testgdbm> store + key> three + data> 3 + + However, such prompting is possible only in interactive mode. In +non-interactive mode (e.g. when running a script), all arguments must +be supplied with each command, otherwise `testgdbm' will report an +error and exit immediately. + + Some commands produce excessive amounts of output. To help you +follow it, `testgdbm' uses a pager utility to display such output. The +name of the pager utility is taken from the environment variable +`PAGER'. The pager is invoked only in interactive mode and only if the +estimated number of output lines is greater then the number of lines on +your screen. + + Many of the `testgdbm' commands operate on database key and data +values. The utility assumes that both keys and data are ASCII strings, +either nul-terminated or not. By default, it is assumed that strings +are nul-terminated. You can change this by using `z' (`key-zero', for +keys) and `Z' (`data-zero', for data) commands. + + The following table summarizes all available commands: + + -- command verb: count + -- command abbrev: co + -- command letter: c + Print the number of entries in the database. + + -- command verb: delete KEY + -- command abbrev: de KEY + -- command letter: d KEY + Delete entry with a given KEY + + -- command verb: export FILE-NAME [truncate] + -- command abbrev: e FILE-NAME [truncate] + Export the database to the flat file FILE-NAME. *Note Flat + files::, for a description of the flat file format and its + purposes. This command will not overwrite an existing file, + unless the word `truncate' is given as its second argument. + + See also *note gdbmexport::. + + -- command verb: fetch KEY + -- command abbrev: fe KEY + -- command letter: f KEY + Fetch and display a record with the given KEY. + + -- command verb: import FILE-NAME [replace] + -- command abbrev: i FILE-NAME [replace] + Import data from a flat dump file FILE-NAME (*note Flat files::). + If the word `replace' is given as the second argument, any records + with the same keys as the already existing ones will replace them. + + -- command verb: list + -- command abbrev: l + List the contents of the database (*note pager::). + + -- command verb: next [KEY] + -- command abbrev: n [KEY] + Sequential access: fetch and display a next record. If KEY is + given, a record following one with this key will be fetched. + Otherwise, the key supplied by the latest `1', `2' or N command + will be used. + + See also `first', below. + + *Note Sequential::, for more information on sequential access. + + -- command verb: quit + -- command abbrev: q + Close the database and quit the utility. + + -- command verb: store KEY DATA + -- command abbrev: sto KEY DATA + -- command letter: s KEY DATA + Store the DATA with KEY in the database. If KEY already exists, + its data will be replaced. + + -- command verb: first + -- command abbrev: fi + -- command letter: 1 + Fetch and display the first record in the database. Subsequent + records can be fetched using `next' command (see above). *Note + Sequential::, for more information on sequential access. + + -- command verb: read FILE [replace] + -- command abbrev: rea FILE [replace] + -- command letter: < FILE [replace] + Read entries from FILE and store them in the database. If the + word `replace' is given as the second argument, any existing + records with matching keys will be replaced. + + -- command verb: reorganize + -- command abbrev: reo + -- command letter: r + Reorganize the database (*note Reorganization::). + + -- command verb: key-zero + -- command abbrev: k + -- command letter: z + Toggle key nul-termination. Use `status' to inspect the current + state. *Note nul-termination::. + + -- command verb: avail + -- command abbrev: a + -- command letter: A + Print the "avail list". + + -- command verb: bucket + -- command abbrev: b + -- command letter: B + Print the bucket number NUM. + + -- command verb: current + -- command abbrev: cu + -- command letter: C + Print the current bucket. + + -- command verb: dir + -- command abbrev: di + -- command letter: D + Print hash directory. + + -- command verb: header + -- command abbrev: hea + -- command letter: F + Print file header. + + -- command verb: hash KEY + -- command abbrev: ha KEY + -- command letter: H KEY + Compute and display the hash value for the given KEY. + + -- command verb: cache + -- command abbrev: ca + -- command letter: K + Print the bucket cache. + + -- command verb: status + -- command abbrev: sta + -- command letter: S + Print current program status. The following example shows the + information displayed: + + Database file: junk.gdbm + Zero terminated keys: yes + Zero terminated data: yes + + -- command verb: version + -- command abbrev: v + Print the version of `gdbm'. + + -- command verb: data-zero + -- command abbrev: da + -- command letter: Z + Toggle data nul-termination. Use `status' to examine the current + status. + + *Note nul-termination::. + + -- command verb: help + -- command abbrev: hel + -- command letter: ? + Print a concise command summary, showing each command letter and + verb with its parameters and a short description of what it does. + Optional arguments are enclosed in square brackets. + + +File: gdbm.info, Node: gdbmexport, Next: Error codes, Prev: testgdbm, Up: Top + +17 Export a database into a portable format. +******************************************** + +The `gdbmexport' utility converts the database into a portable "flat +format". Files in this format can be used to populate databases using +the `gdbm_import' function (*note gdbm_import: Flat files.) or the `i' +command of `testgdbm' utility (*note testgdbm import::). In many cases +files in this format are suitable for sending over the network to +populate the database on another machine. The only exception to this +are databases whose records contain non-ASCII data (e.g. C structures, +integers etc.). For such databases you will be better off by writing a +specialized utility to convert them to an architecture-independent +format. + + If `gdbmexport' is linked with `libgdbm' version 1.8.3, it can be +used to convert databases from old to new format. + + The utility takes two mandatory arguments: the name of the database +file to convert and the output file name, e.g.: + + $ gdbmexport junk.gdbm junk.flat + + In addition two options are understood: + +`-h' + Display short usage summary and exit. + +`-v' + Display program version and licensing information, and exit. + + +File: gdbm.info, Node: Variables, Next: Compatibility, Prev: Error codes, Up: Top + +18 Useful global variables. +*************************** + +The following global variables and constants are available: + + -- Variable: gdbm_error gdbm_errno + This variable contains error code from the last failed `gdbm' + call. *Note Error codes::, for a list of available error codes and + their descriptions. + + Use `gdbm_strerror' (*note Errors::) to convert it to a + descriptive text. + + -- Variable: const char * gdbm_errlist[] + This variable is an array of error descriptions, which is used by + `gdbm_strerror' to convert error codes to human-readable text + (*note Errors::). You can access it directly, if you wish so. It + contains `_GDBM_MAX_ERRNO + 1' elements and can be directly + indexed by the error code to obtain a corresponding descriptive + text. + + -- Constant: _GDBM_MIN_ERRNO + The minimum error code used by `gdbm'. + + -- Constant: _GDBM_MAX_ERRNO + The maximum error code used by `gdbm'. + + -- Variable: const char * gdbm_version + A string containing the version information. + + -- Variable: int const gdbm_version_number[3] + This variable contains the `gdbm' version numbers: + + Index Meaning + --------------------------------------------------------------- + 0 Major number + 1 Minor number + 2 Patchlevel number + + Additionally, the following constants are defined in the `gdbm.h' + file: + + GDBM_VERSION_MAJOR + Major number. + + GDBM_VERSION_MINOR + Minor number. + + GDBM_VERSION_PATCH + Patchlevel number. + + These can be used to verify whether the header file matches the + library. + + To compare two split-out version numbers, use the following function: + + -- gdbm interface: int gdbm_version_cmp (int const A[3], int const + B[3]) + Compare two version numbers. Return `-1' if A is less than B, `1' + if A is greater than B and `0' if they are equal. + + Comparison is done from left to right, so that: + + a = { 1, 8, 3 }; + b = { 1, 8, 3 }; + gdbm_version_cmp (a, b) => 0 + + a = { 1, 8, 3 }; + b = { 1, 8, 2 }; + gdbm_version_cmp (a, b) => 1 + + a = { 1, 8, 3 }; + b = { 1, 9. 0 }; + gdbm_version_cmp (a, b) => -1 + + +File: gdbm.info, Node: Error codes, Next: Variables, Prev: gdbmexport, Up: Top + +19 Error codes +************** + +This chapter summarizes the error codes which can be set by the +functions in `gdbm' library. + +GDBM_NO_ERROR + No error occurred. + +GDBM_MALLOC_ERROR + Memory allocation failed. Not enough memory. + +GDBM_BLOCK_SIZE_ERROR + This error is set by the `gdbm_open' function (*note Open::), if + the value of its BLOCK_SIZE argument is incorrect. + +GDBM_FILE_OPEN_ERROR + The library was not able to open a disk file. This can be set by + `gdbm_open' (*note Open::), `gdbm_export' and `gdbm_import' + functions (*note Flat files::). + + Inspect the value of the system `errno' variable to get more + detailed diagnostics. + +GDBM_FILE_WRITE_ERROR + Writing to a disk file failed. This can be set by `gdbm_open' + (*note Open::), `gdbm_export' and `gdbm_import' functions. + + Inspect the value of the system `errno' variable to get more + detailed diagnostics. + +GDBM_FILE_SEEK_ERROR + Positioning in a disk file failed. This can be set by `gdbm_open' + (*note Open::) function. + + Inspect the value of the system `errno' variable to get a more + detailed diagnostics. + +GDBM_FILE_READ_ERROR + Reading from a disk file failed. This can be set by `gdbm_open' + (*note Open::), `gdbm_export' and `gdbm_import' functions. + + Inspect the value of the system `errno' variable to get a more + detailed diagnostics. + +GDBM_BAD_MAGIC_NUMBER + The file given as argument to `gdbm_open' function is not a valid + `gdbm' file: it has a wrong magic number. + +GDBM_EMPTY_DATABASE + The file given as argument to `gdbm_open' function is not a valid + `gdbm' file: it has zero length. + +GDBM_CANT_BE_READER + This error code is set by the `gdbm_open' function if it is not + able to lock file when called in `GDBM_READER' mode (*note + GDBM_READER: Open.). + +GDBM_CANT_BE_WRITER + This error code is set by the `gdbm_open' function if it is not + able to lock file when called in writer mode (*note Open::). + +GDBM_READER_CANT_DELETE + Set by the `gdbm_delete' (*note Delete::) if it attempted to + operate on a database that is open in read-only mode (*note + GDBM_READER: Open.). + +GDBM_READER_CANT_STORE + Set by the `gdbm_store' (*note Store::) if it attempted to operate + on a database that is open in read-only mode (*note GDBM_READER: + Open.). + +GDBM_READER_CANT_REORGANIZE + Set by the `gdbm_reorganize' (*note Reorganization::) if it + attempted to operate on a database that is open in read-only mode + (*note GDBM_READER: Open.). + +GDBM_UNKNOWN_UPDATE + Currently unused. Reserved for future uses. + +GDBM_ITEM_NOT_FOUND + Requested item was not found. This error is set by `gdbm_delete' + (*note Delete::) and `gdbm_fetch' (*note Fetch::) when the + requested KEY value is not found in the database. + +GDBM_REORGANIZE_FAILED + The `gdbm_reorganize' function is not able to create a temporary + database. *Note Reorganization::. + +GDBM_CANNOT_REPLACE + Cannot replace existing item. This error is set by the + `gdbm_store' if the requested KEY value is found in the database + and the FLAG parameter is not `GDBM_REPLACE'. *Note Store::, for + a detailed discussion. + +GDBM_ILLEGAL_DATA + Either KEY or CONTENT parameter was wrong in a call to to + `gdbm_store' (*note Store::). + +GDBM_OPT_ALREADY_SET + Requested option can be set only once and was already set. This + error is returned by the `gdbm_setopt' function. *Note + GDBM_CACHESIZE: Options. + +GDBM_OPT_ILLEGAL + The OPTION argument is not valid or the VALUE argument points to + an invalid value in a call to `gdbm_setopt' function. *Note + Options::. + +GDBM_BYTE_SWAPPED + The `gdbm_open' function (*note Open::) attempts to open a + database which is created on a machine with different byte + ordering. + +GDBM_BAD_FILE_OFFSET + The `gdbm_open' function (*note Open::) sets this error code if + the file it tries to open has a wrong magic number. + +GDBM_BAD_OPEN_FLAGS + Set by the `gdbm_export' function if supplied an invalid FLAGS + argument. *Note Flat files::. + +GDBM_FILE_STAT_ERROR + Getting information about a disk file failed. The system `errno' + will give more details about the error. + + This error can be set by the following functions: `gdbm_open', + `gdbm_reorganize'. + +GDBM_FILE_EOF + End of file was encountered where more data was expected to be + present. This error can occur when fetching data from the database + and usually means that the database is truncated or otherwise + corrupted. + + This error can be set by any GDBM function that does I/O. Some of + these functions are: `gdbm_delete', `gdbm_exists', `gdbm_fetch', + `gdbm_export', `gdbm_import', `gdbm_reorganize', `gdbm_firstkey', + `gdbm_nextkey', `gdbm_store'. + + +File: gdbm.info, Node: Compatibility, Next: Bugs, Prev: Variables, Up: Top + +20 Compatibility with standard `dbm' and `ndbm'. +************************************************ + +`Gdbm' includes a compatibility layer, which provides traditional +`ndbm' and older `dbm' functions. The layer is compiled and installed +if the `--enable-libgdbm-compat' option is used when configuring the +package. + + The compatibility layer consists of two header files: `ndbm.h' and +`dbm.h' and the `libgdbm_compat' library. + + Older programs using `ndbm' or `dbm' interfaces can use +`libgdbm_compat' without any changes. To link a program with the +compatibility library, add the following two options to the `cc' +invocation: `-lgdbm -lgdbm_compat'. The `-L' option may also be +required, depending on where `gdbm' is installed, e.g.: + + cc ... -L/usr/local/lib -lgdbm -lgdbm_compat + + Databases created and manipulated by the compatibility interfaces +consist of two different files: `FILE.dir' and `FILE.pag'. This is +required by the POSIX specification and corresponds to the traditional +usage. Note, however, that despite the similarity of the naming +convention, actual data stored in these files has not the same format as +in the databases created by other `dbm' or `ndbm' libraries. In other +words, you cannot access a standard UNIX `dbm' file with GNU `dbm'! + + GNU `dbm' files are not `sparse'. You can copy them with the usual +`cp' command and they will not expand in the copying process. + +* Menu: + +* ndbm:: NDBM interface functions. +* dbm:: DBM interface functions. + + +File: gdbm.info, Node: ndbm, Next: dbm, Up: Compatibility + +20.1 NDBM interface functions. +============================== + +The functions below implement the POSIX `ndbm' interface: + + -- ndbm: DBM * dbm_open (char *FILE, int FLAGS, int MODE) + Opens a database. The FILE argument is the full name of the + database file to be opened. The function opens two files: + `FILE.pag' and `FILE.dir'. The FLAGS and MODE arguments have the + same meaning as the second and third arguments of `open' (*note + open a file: (open(2))open.), except that a database opened for + write-only access opens the files for read and write access and + the behavior of the `O_APPEND' flag is unspecified. + + The function returns a pointer to the `DBM' structure describing + the database. This pointer is used to refer to this database in + all operations described below. + + Any error detected will cause a return value of `NULL' and an + appropriate value will be stored in `gdbm_errno' (*note + Variables::). + + -- ndbm: void dbm_close (DBM *DBF) + Closes the database. The DBF argument must be a pointer returned + by an earlier call to `dbm_open'. + + -- ndbm: datum dbm_fetch (DBM *DBF, datum KEY) + Reads a record from the database with the matching key. The KEY + argument supplies the key that is being looked for. + + If no matching record is found, the `dptr' member of the returned + datum is `NULL'. Otherwise, the `dptr' member of the returned + datum points to the memory managed by the compatibility library. + The application should never free it. + + -- ndbm: int dbm_store (DBM *DBF, datum KEY, datum CONTENT, int MODE) + Writes a key/value pair to the database. The argument DBF is a + pointer to the `DBM' structure returned from a call to `dbm_open'. + The KEY and CONTENT provide the values for the record key and + content. The MODE argument controls the behavior of `dbm_store' + in case a matching record already exists in the database. It can + have one of the following two values: + + `DBM_REPLACE' + Replace existing record with the new one. + + `DBM_INSERT' + The existing record is left unchanged, and the function + returns `1'. + + If no matching record exists in the database, new record will be + inserted no matter what the value of the MODE is. + + -- ndbm: int dbm_delete (DBM *DBF, datum KEY) + Deletes the record with the matching key from the database. If the + function succeeds, `0' is returned. Otherwise, if no matching + record is found or if an error occurs, `-1' is returned. + + -- ndbm: datum dbm_firstkey (DBM *DBF) + Initializes iteration over the keys from the database and returns + the first key. Note, that the word `first' does not imply any + specific ordering of the keys. + + If there are no records in the database, the `dptr' member of the + returned datum is `NULL'. Otherwise, the `dptr' member of the + returned datum points to the memory managed by the compatibility + library. The application should never free it. + + -- ndbm: datum dbm_nextkey (DBM *DBF) + Continues the iteration started by `dbm_firstkey'. Returns the + next key in the database. If the iteration covered all keys in the + database, the `dptr' member of the returned datum is `NULL'. + Otherwise, the `dptr' member of the returned datum points to the + memory managed by the compatibility library. The application + should never free it. + + The usual way of iterating over all the records in the database is: + + for (key = dbm_firstkey (dbf); + key.ptr; + key = dbm_nextkey (dbf)) + { + /* do something with the key */ + } + + The loop above should not try to delete any records from the + database, otherwise the iteration is not guaranteed to cover all + the keys. *Note Sequential::, for a detailed discussion of this. + + -- ndbm: int dbm_error (DBM *DBF) + Returns the error condition of the database: `0' if no errors + occurred so far while manipulating the database, and a non-zero + value otherwise. + + -- ndbm: void dbm_clearerr (DBM *DBF) + Clears the error condition of the database. + + -- ndbm: int dbm_dirfno (DBM *DBF) + Returns the file descriptor of the `dir' file of the database. It + is guaranteed to be different from the descriptor returned by the + `dbm_pagfno' function (see below). + + The application can lock this descriptor to serialize accesses to + the database. + + -- ndbm: int dbm_pagfno (DBM *DBF) + Returns the file descriptor of the `pag' file of the database. + See also `dbm_dirfno'. + + -- ndbm: int dbm_rdonly (DBM *DBF) + Returns `1' if the database DBF is open in a read-only mode and + `0' otherwise. + + +File: gdbm.info, Node: dbm, Prev: ndbm, Up: Compatibility + +20.2 DBM interface functions. +============================= + +The functions below are provided for compatibility with the old UNIX +`DBM' interface. Only one database at a time can be manipulated using +them. + + -- dbm: int dbminit (char *FILE) + Opens a database. The FILE argument is the full name of the + database file to be opened. The function opens two files: + `FILE.pag' and `FILE.dir'. If any of them does not exist, the + function fails. It never attempts to create the files. + + The database is opened in the read-write mode, if its disk + permissions permit. + + The application must ensure that the functions described below in + this section are called only after a successful call to `dbminit'. + + -- dbm: int dbmclose (void) + Closes the database opened by an earlier call to `dbminit'. + + -- dbm: datum fetch (datum KEY) + Reads a record from the database with the matching key. The KEY + argument supplies the key that is being looked for. + + If no matching record is found, the `dptr' member of the returned + datum is `NULL'. Otherwise, the `dptr' member of the returned + datum points to the memory managed by the compatibility library. + The application should never free it. + + -- dbm: int store (datum KEY, datum CONTENT) + Stores the key/value pair in the database. If a record with the + matching key already exists, its content will be replaced with the + new one. + + Returns `0' on success and `-1' on error. + + -- dbm: int delete (datum KEY) + Deletes a record with the matching key. + + If the function succeeds, `0' is returned. Otherwise, if no + matching record is found or if an error occurs, `-1' is returned. + + -- dbm: datum firstkey (void) + Initializes iteration over the keys from the database and returns + the first key. Note, that the word `first' does not imply any + specific ordering of the keys. + + If there are no records in the database, the `dptr' member of the + returned datum is `NULL'. Otherwise, the `dptr' member of the + returned datum points to the memory managed by the compatibility + library. The application should never free it. + + -- dbm: datum nextkey (datum KEY) + Continues the iteration started by a call to `firstkey'. Returns + the next key in the database. If the iteration covered all keys + in the database, the `dptr' member of the returned datum is `NULL'. + Otherwise, the `dptr' member of the returned datum points to the + memory managed by the compatibility library. The application + should never free it. + + +File: gdbm.info, Node: Bugs, Next: Resources, Prev: Compatibility, Up: Top + +21 Problems and bugs. +********************* + +If you have problems with GNU `dbm' or think you've found a bug, please +report it. Before reporting a bug, make sure you've actually found a +real bug. Carefully reread the documentation and see if it really says +you can do what you're trying to do. If it's not clear whether you +should be able to do something or not, report that too; it's a bug in +the documentation! + + Before reporting a bug or trying to fix it yourself, try to isolate +it to the smallest possible input file that reproduces the problem. +Then send us the input file and the exact results `gdbm' gave you. Also +say what you expected to occur; this will help us decide whether the +problem was really in the documentation. + + Once you've got a precise problem, send e-mail to . + + Please include the version number of GNU `dbm' you are using. You +can get this information by printing the variable `gdbm_version' (*note +Variables::). + + Non-bug suggestions are always welcome as well. If you have +questions about things that are unclear in the documentation or are +just obscure features, please report them too. + + You may contact the authors and maintainers by e-mail: + , , + + +File: gdbm.info, Node: Resources, Next: GNU Free Documentation License, Prev: Bugs, Up: Top + +22 Additional resources +*********************** + +For the latest updates and pointers to additional resources, visit +`http://www.gnu.org/software/gdbm'. + + In particular, a copy of `gdbm' documentation in various formats is +available online at `http://www.gnu.org/software/gdbm/manual'. + + Latest versions of `gdbm' can be downloaded from anonymous FTP: +`ftp://ftp.gnu.org/gnu/gdbm', or via HTTP from +`http://ftp.gnu.org/gnu/gdbm', or from any GNU mirror worldwide. See +`http://www.gnu.org/order/ftp.html', for a list of mirrors. + + To track `gdbm' development, visit +`http://puszcza.gnu.org.ua/projects/gdbm'. + + +File: gdbm.info, Node: GNU Free Documentation License, Next: Index, Prev: Resources, Up: Top + +Appendix A GNU Free Documentation License +***************************************** + + Version 1.3, 3 November 2008 + + Copyright (C) 2000, 2001, 2002, 2007, 2008, 2011 Free Software + Foundation, Inc. + `http://fsf.org/' + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + 0. PREAMBLE + + The purpose of this License is to make a manual, textbook, or other + functional and useful document "free" in the sense of freedom: to + assure everyone the effective freedom to copy and redistribute it, + with or without modifying it, either commercially or + noncommercially. Secondarily, this License preserves for the + author and publisher a way to get credit for their work, while not + being considered responsible for modifications made by others. + + This License is a kind of "copyleft", which means that derivative + works of the document must themselves be free in the same sense. + It complements the GNU General Public License, which is a copyleft + license designed for free software. + + We have designed this License in order to use it for manuals for + free software, because free software needs free documentation: a + free program should come with manuals providing the same freedoms + that the software does. But this License is not limited to + software manuals; it can be used for any textual work, regardless + of subject matter or whether it is published as a printed book. + We recommend this License principally for works whose purpose is + instruction or reference. + + 1. APPLICABILITY AND DEFINITIONS + + This License applies to any manual or other work, in any medium, + that contains a notice placed by the copyright holder saying it + can be distributed under the terms of this License. Such a notice + grants a world-wide, royalty-free license, unlimited in duration, + to use that work under the conditions stated herein. The + "Document", below, refers to any such manual or work. Any member + of the public is a licensee, and is addressed as "you". You + accept the license if you copy, modify or distribute the work in a + way requiring permission under copyright law. + + A "Modified Version" of the Document means any work containing the + Document or a portion of it, either copied verbatim, or with + modifications and/or translated into another language. + + A "Secondary Section" is a named appendix or a front-matter section + of the Document that deals exclusively with the relationship of the + publishers or authors of the Document to the Document's overall + subject (or to related matters) and contains nothing that could + fall directly within that overall subject. (Thus, if the Document + is in part a textbook of mathematics, a Secondary Section may not + explain any mathematics.) The relationship could be a matter of + historical connection with the subject or with related matters, or + of legal, commercial, philosophical, ethical or political position + regarding them. + + The "Invariant Sections" are certain Secondary Sections whose + titles are designated, as being those of Invariant Sections, in + the notice that says that the Document is released under this + License. If a section does not fit the above definition of + Secondary then it is not allowed to be designated as Invariant. + The Document may contain zero Invariant Sections. If the Document + does not identify any Invariant Sections then there are none. + + The "Cover Texts" are certain short passages of text that are + listed, as Front-Cover Texts or Back-Cover Texts, in the notice + that says that the Document is released under this License. A + Front-Cover Text may be at most 5 words, and a Back-Cover Text may + be at most 25 words. + + A "Transparent" copy of the Document means a machine-readable copy, + represented in a format whose specification is available to the + general public, that is suitable for revising the document + straightforwardly with generic text editors or (for images + composed of pixels) generic paint programs or (for drawings) some + widely available drawing editor, and that is suitable for input to + text formatters or for automatic translation to a variety of + formats suitable for input to text formatters. A copy made in an + otherwise Transparent file format whose markup, or absence of + markup, has been arranged to thwart or discourage subsequent + modification by readers is not Transparent. An image format is + not Transparent if used for any substantial amount of text. A + copy that is not "Transparent" is called "Opaque". + + Examples of suitable formats for Transparent copies include plain + ASCII without markup, Texinfo input format, LaTeX input format, + SGML or XML using a publicly available DTD, and + standard-conforming simple HTML, PostScript or PDF designed for + human modification. Examples of transparent image formats include + PNG, XCF and JPG. Opaque formats include proprietary formats that + can be read and edited only by proprietary word processors, SGML or + XML for which the DTD and/or processing tools are not generally + available, and the machine-generated HTML, PostScript or PDF + produced by some word processors for output purposes only. + + The "Title Page" means, for a printed book, the title page itself, + plus such following pages as are needed to hold, legibly, the + material this License requires to appear in the title page. For + works in formats which do not have any title page as such, "Title + Page" means the text near the most prominent appearance of the + work's title, preceding the beginning of the body of the text. + + The "publisher" means any person or entity that distributes copies + of the Document to the public. + + A section "Entitled XYZ" means a named subunit of the Document + whose title either is precisely XYZ or contains XYZ in parentheses + following text that translates XYZ in another language. (Here XYZ + stands for a specific section name mentioned below, such as + "Acknowledgements", "Dedications", "Endorsements", or "History".) + To "Preserve the Title" of such a section when you modify the + Document means that it remains a section "Entitled XYZ" according + to this definition. + + The Document may include Warranty Disclaimers next to the notice + which states that this License applies to the Document. These + Warranty Disclaimers are considered to be included by reference in + this License, but only as regards disclaiming warranties: any other + implication that these Warranty Disclaimers may have is void and + has no effect on the meaning of this License. + + 2. VERBATIM COPYING + + You may copy and distribute the Document in any medium, either + commercially or noncommercially, provided that this License, the + copyright notices, and the license notice saying this License + applies to the Document are reproduced in all copies, and that you + add no other conditions whatsoever to those of this License. You + may not use technical measures to obstruct or control the reading + or further copying of the copies you make or distribute. However, + you may accept compensation in exchange for copies. If you + distribute a large enough number of copies you must also follow + the conditions in section 3. + + You may also lend copies, under the same conditions stated above, + and you may publicly display copies. + + 3. COPYING IN QUANTITY + + If you publish printed copies (or copies in media that commonly + have printed covers) of the Document, numbering more than 100, and + the Document's license notice requires Cover Texts, you must + enclose the copies in covers that carry, clearly and legibly, all + these Cover Texts: Front-Cover Texts on the front cover, and + Back-Cover Texts on the back cover. Both covers must also clearly + and legibly identify you as the publisher of these copies. The + front cover must present the full title with all words of the + title equally prominent and visible. You may add other material + on the covers in addition. Copying with changes limited to the + covers, as long as they preserve the title of the Document and + satisfy these conditions, can be treated as verbatim copying in + other respects. + + If the required texts for either cover are too voluminous to fit + legibly, you should put the first ones listed (as many as fit + reasonably) on the actual cover, and continue the rest onto + adjacent pages. + + If you publish or distribute Opaque copies of the Document + numbering more than 100, you must either include a + machine-readable Transparent copy along with each Opaque copy, or + state in or with each Opaque copy a computer-network location from + which the general network-using public has access to download + using public-standard network protocols a complete Transparent + copy of the Document, free of added material. If you use the + latter option, you must take reasonably prudent steps, when you + begin distribution of Opaque copies in quantity, to ensure that + this Transparent copy will remain thus accessible at the stated + location until at least one year after the last time you + distribute an Opaque copy (directly or through your agents or + retailers) of that edition to the public. + + It is requested, but not required, that you contact the authors of + the Document well before redistributing any large number of + copies, to give them a chance to provide you with an updated + version of the Document. + + 4. MODIFICATIONS + + You may copy and distribute a Modified Version of the Document + under the conditions of sections 2 and 3 above, provided that you + release the Modified Version under precisely this License, with + the Modified Version filling the role of the Document, thus + licensing distribution and modification of the Modified Version to + whoever possesses a copy of it. In addition, you must do these + things in the Modified Version: + + A. Use in the Title Page (and on the covers, if any) a title + distinct from that of the Document, and from those of + previous versions (which should, if there were any, be listed + in the History section of the Document). You may use the + same title as a previous version if the original publisher of + that version gives permission. + + B. List on the Title Page, as authors, one or more persons or + entities responsible for authorship of the modifications in + the Modified Version, together with at least five of the + principal authors of the Document (all of its principal + authors, if it has fewer than five), unless they release you + from this requirement. + + C. State on the Title page the name of the publisher of the + Modified Version, as the publisher. + + D. Preserve all the copyright notices of the Document. + + E. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. + + F. Include, immediately after the copyright notices, a license + notice giving the public permission to use the Modified + Version under the terms of this License, in the form shown in + the Addendum below. + + G. Preserve in that license notice the full lists of Invariant + Sections and required Cover Texts given in the Document's + license notice. + + H. Include an unaltered copy of this License. + + I. Preserve the section Entitled "History", Preserve its Title, + and add to it an item stating at least the title, year, new + authors, and publisher of the Modified Version as given on + the Title Page. If there is no section Entitled "History" in + the Document, create one stating the title, year, authors, + and publisher of the Document as given on its Title Page, + then add an item describing the Modified Version as stated in + the previous sentence. + + J. Preserve the network location, if any, given in the Document + for public access to a Transparent copy of the Document, and + likewise the network locations given in the Document for + previous versions it was based on. These may be placed in + the "History" section. You may omit a network location for a + work that was published at least four years before the + Document itself, or if the original publisher of the version + it refers to gives permission. + + K. For any section Entitled "Acknowledgements" or "Dedications", + Preserve the Title of the section, and preserve in the + section all the substance and tone of each of the contributor + acknowledgements and/or dedications given therein. + + L. Preserve all the Invariant Sections of the Document, + unaltered in their text and in their titles. Section numbers + or the equivalent are not considered part of the section + titles. + + M. Delete any section Entitled "Endorsements". Such a section + may not be included in the Modified Version. + + N. Do not retitle any existing section to be Entitled + "Endorsements" or to conflict in title with any Invariant + Section. + + O. Preserve any Warranty Disclaimers. + + If the Modified Version includes new front-matter sections or + appendices that qualify as Secondary Sections and contain no + material copied from the Document, you may at your option + designate some or all of these sections as invariant. To do this, + add their titles to the list of Invariant Sections in the Modified + Version's license notice. These titles must be distinct from any + other section titles. + + You may add a section Entitled "Endorsements", provided it contains + nothing but endorsements of your Modified Version by various + parties--for example, statements of peer review or that the text + has been approved by an organization as the authoritative + definition of a standard. + + You may add a passage of up to five words as a Front-Cover Text, + and a passage of up to 25 words as a Back-Cover Text, to the end + of the list of Cover Texts in the Modified Version. Only one + passage of Front-Cover Text and one of Back-Cover Text may be + added by (or through arrangements made by) any one entity. If the + Document already includes a cover text for the same cover, + previously added by you or by arrangement made by the same entity + you are acting on behalf of, you may not add another; but you may + replace the old one, on explicit permission from the previous + publisher that added the old one. + + The author(s) and publisher(s) of the Document do not by this + License give permission to use their names for publicity for or to + assert or imply endorsement of any Modified Version. + + 5. COMBINING DOCUMENTS + + You may combine the Document with other documents released under + this License, under the terms defined in section 4 above for + modified versions, provided that you include in the combination + all of the Invariant Sections of all of the original documents, + unmodified, and list them all as Invariant Sections of your + combined work in its license notice, and that you preserve all + their Warranty Disclaimers. + + The combined work need only contain one copy of this License, and + multiple identical Invariant Sections may be replaced with a single + copy. If there are multiple Invariant Sections with the same name + but different contents, make the title of each such section unique + by adding at the end of it, in parentheses, the name of the + original author or publisher of that section if known, or else a + unique number. Make the same adjustment to the section titles in + the list of Invariant Sections in the license notice of the + combined work. + + In the combination, you must combine any sections Entitled + "History" in the various original documents, forming one section + Entitled "History"; likewise combine any sections Entitled + "Acknowledgements", and any sections Entitled "Dedications". You + must delete all sections Entitled "Endorsements." + + 6. COLLECTIONS OF DOCUMENTS + + You may make a collection consisting of the Document and other + documents released under this License, and replace the individual + copies of this License in the various documents with a single copy + that is included in the collection, provided that you follow the + rules of this License for verbatim copying of each of the + documents in all other respects. + + You may extract a single document from such a collection, and + distribute it individually under this License, provided you insert + a copy of this License into the extracted document, and follow + this License in all other respects regarding verbatim copying of + that document. + + 7. AGGREGATION WITH INDEPENDENT WORKS + + A compilation of the Document or its derivatives with other + separate and independent documents or works, in or on a volume of + a storage or distribution medium, is called an "aggregate" if the + copyright resulting from the compilation is not used to limit the + legal rights of the compilation's users beyond what the individual + works permit. When the Document is included in an aggregate, this + License does not apply to the other works in the aggregate which + are not themselves derivative works of the Document. + + If the Cover Text requirement of section 3 is applicable to these + copies of the Document, then if the Document is less than one half + of the entire aggregate, the Document's Cover Texts may be placed + on covers that bracket the Document within the aggregate, or the + electronic equivalent of covers if the Document is in electronic + form. Otherwise they must appear on printed covers that bracket + the whole aggregate. + + 8. TRANSLATION + + Translation is considered a kind of modification, so you may + distribute translations of the Document under the terms of section + 4. Replacing Invariant Sections with translations requires special + permission from their copyright holders, but you may include + translations of some or all Invariant Sections in addition to the + original versions of these Invariant Sections. You may include a + translation of this License, and all the license notices in the + Document, and any Warranty Disclaimers, provided that you also + include the original English version of this License and the + original versions of those notices and disclaimers. In case of a + disagreement between the translation and the original version of + this License or a notice or disclaimer, the original version will + prevail. + + If a section in the Document is Entitled "Acknowledgements", + "Dedications", or "History", the requirement (section 4) to + Preserve its Title (section 1) will typically require changing the + actual title. + + 9. TERMINATION + + You may not copy, modify, sublicense, or distribute the Document + except as expressly provided under this License. Any attempt + otherwise to copy, modify, sublicense, or distribute it is void, + and will automatically terminate your rights under this License. + + However, if you cease all violation of this License, then your + license from a particular copyright holder is reinstated (a) + provisionally, unless and until the copyright holder explicitly + and finally terminates your license, and (b) permanently, if the + copyright holder fails to notify you of the violation by some + reasonable means prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is + reinstated permanently if the copyright holder notifies you of the + violation by some reasonable means, this is the first time you have + received notice of violation of this License (for any work) from + that copyright holder, and you cure the violation prior to 30 days + after your receipt of the notice. + + Termination of your rights under this section does not terminate + the licenses of parties who have received copies or rights from + you under this License. If your rights have been terminated and + not permanently reinstated, receipt of a copy of some or all of + the same material does not give you any rights to use it. + + 10. FUTURE REVISIONS OF THIS LICENSE + + The Free Software Foundation may publish new, revised versions of + the GNU Free Documentation License from time to time. Such new + versions will be similar in spirit to the present version, but may + differ in detail to address new problems or concerns. See + `http://www.gnu.org/copyleft/'. + + Each version of the License is given a distinguishing version + number. If the Document specifies that a particular numbered + version of this License "or any later version" applies to it, you + have the option of following the terms and conditions either of + that specified version or of any later version that has been + published (not as a draft) by the Free Software Foundation. If + the Document does not specify a version number of this License, + you may choose any version ever published (not as a draft) by the + Free Software Foundation. If the Document specifies that a proxy + can decide which future versions of this License can be used, that + proxy's public statement of acceptance of a version permanently + authorizes you to choose that version for the Document. + + 11. RELICENSING + + "Massive Multiauthor Collaboration Site" (or "MMC Site") means any + World Wide Web server that publishes copyrightable works and also + provides prominent facilities for anybody to edit those works. A + public wiki that anybody can edit is an example of such a server. + A "Massive Multiauthor Collaboration" (or "MMC") contained in the + site means any set of copyrightable works thus published on the MMC + site. + + "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 + license published by Creative Commons Corporation, a not-for-profit + corporation with a principal place of business in San Francisco, + California, as well as future copyleft versions of that license + published by that same organization. + + "Incorporate" means to publish or republish a Document, in whole or + in part, as part of another Document. + + An MMC is "eligible for relicensing" if it is licensed under this + License, and if all works that were first published under this + License somewhere other than this MMC, and subsequently + incorporated in whole or in part into the MMC, (1) had no cover + texts or invariant sections, and (2) were thus incorporated prior + to November 1, 2008. + + The operator of an MMC Site may republish an MMC contained in the + site under CC-BY-SA on the same site at any time before August 1, + 2009, provided the MMC is eligible for relicensing. + + +ADDENDUM: How to use this License for your documents +==================================================== + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and license +notices just after the title page: + + Copyright (C) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.3 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled ``GNU + Free Documentation License''. + + If you have Invariant Sections, Front-Cover Texts and Back-Cover +Texts, replace the "with...Texts." line with this: + + with the Invariant Sections being LIST THEIR TITLES, with + the Front-Cover Texts being LIST, and with the Back-Cover Texts + being LIST. + + If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + + If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, to +permit their use in free software. + + +File: gdbm.info, Node: Index, Prev: GNU Free Documentation License, Up: Top + +Index +***** + +[index] +* Menu: + +* -g, testgdbm option: testgdbm. (line 9) +* -n, testgdbm option: testgdbm. (line 19) +* -r, testgdbm option: testgdbm. (line 16) +* 1: shell. (line 118) +* <: shell. (line 125) +* ?: shell. (line 200) +* _GDBM_MAX_ERRNO: Variables. (line 28) +* _GDBM_MIN_ERRNO: Variables. (line 25) +* A: shell. (line 143) +* a: shell. (line 142) +* avail: shell. (line 141) +* B: shell. (line 148) +* b: shell. (line 147) +* bucket: shell. (line 146) +* C: shell. (line 153) +* c: shell. (line 63) +* ca: shell. (line 172) +* cache: shell. (line 171) +* close-on-exec: Open. (line 48) +* closing database: Close. (line 6) +* co: shell. (line 62) +* command line options, testgdbm: invocation. (line 6) +* compatibility layer: Compatibility. (line 6) +* count: shell. (line 61) +* creating a database, testgdbm: testgdbm. (line 19) +* cu: shell. (line 152) +* current: shell. (line 151) +* D: shell. (line 158) +* d: shell. (line 68) +* da: shell. (line 191) +* data-zero: shell. (line 190) +* database options: Options. (line 6) +* database reorganization: Reorganization. (line 6) +* database synchronization: Sync. (line 6) +* database, closing: Close. (line 6) +* database, opening or creating: Open. (line 6) +* DBM functions: dbm. (line 6) +* dbm.h: Compatibility. (line 11) +* dbm_clearerr: ndbm. (line 98) +* dbm_close: ndbm. (line 26) +* dbm_delete: ndbm. (line 57) +* dbm_dirfno: ndbm. (line 101) +* dbm_error: ndbm. (line 93) +* dbm_fetch: ndbm. (line 30) +* dbm_firstkey: ndbm. (line 62) +* DBM_INSERT: ndbm. (line 49) +* dbm_nextkey: ndbm. (line 72) +* dbm_open: ndbm. (line 9) +* dbm_pagfno: ndbm. (line 109) +* dbm_rdonly: ndbm. (line 113) +* DBM_REPLACE: ndbm. (line 46) +* dbm_store: ndbm. (line 39) +* dbmclose: dbm. (line 23) +* dbminit: dbm. (line 11) +* de: shell. (line 67) +* default database, testgdbm: testgdbm. (line 9) +* delete <1>: dbm. (line 42) +* delete: shell. (line 66) +* deleting records: Delete. (line 6) +* deletion in iteration loops: Sequential. (line 56) +* di: shell. (line 157) +* dir: shell. (line 156) +* dir file: Compatibility. (line 22) +* e: shell. (line 72) +* error codes: Error codes. (line 6) +* error strings: Errors. (line 6) +* export <1>: shell. (line 71) +* export: Flat files. (line 6) +* F: shell. (line 163) +* f: shell. (line 82) +* fe: shell. (line 81) +* fetch <1>: dbm. (line 26) +* fetch: shell. (line 80) +* fetching records: Fetch. (line 6) +* fi: shell. (line 117) +* first: shell. (line 116) +* firstkey: dbm. (line 48) +* Flat file format: Flat files. (line 6) +* GDBM_BAD_FILE_OFFSET: Error codes. (line 117) +* GDBM_BAD_MAGIC_NUMBER: Error codes. (line 48) +* GDBM_BAD_OPEN_FLAGS: Error codes. (line 121) +* GDBM_BLOCK_SIZE_ERROR: Error codes. (line 15) +* GDBM_BYTE_SWAPPED: Error codes. (line 112) +* GDBM_CACHESIZE: Options. (line 30) +* GDBM_CANNOT_REPLACE: Error codes. (line 92) +* GDBM_CANT_BE_READER: Error codes. (line 56) +* GDBM_CANT_BE_WRITER: Error codes. (line 61) +* GDBM_CENTFREE: Options. (line 78) +* GDBM_CLOEXEC: Open. (line 48) +* gdbm_close: Close. (line 10) +* GDBM_COALESCEBLKS: Options. (line 92) +* gdbm_delete: Delete. (line 9) +* gdbm_delete and sequential access: Sequential. (line 56) +* GDBM_EMPTY_DATABASE: Error codes. (line 52) +* gdbm_errlist: Variables. (line 17) +* gdbm_errno: Variables. (line 9) +* gdbm_exists: Fetch. (line 37) +* gdbm_export: Flat files. (line 25) +* GDBM_FASTMODE: Options. (line 52) +* gdbm_fdesc: Locking. (line 14) +* gdbm_fetch: Fetch. (line 7) +* GDBM_FILE_EOF: Error codes. (line 132) +* GDBM_FILE_OPEN_ERROR: Error codes. (line 19) +* GDBM_FILE_READ_ERROR: Error codes. (line 41) +* GDBM_FILE_SEEK_ERROR: Error codes. (line 34) +* GDBM_FILE_STAT_ERROR: Error codes. (line 125) +* GDBM_FILE_WRITE_ERROR: Error codes. (line 27) +* gdbm_firstkey: Sequential. (line 14) +* GDBM_GETCACHESIZE: Options. (line 40) +* GDBM_GETCOALESCEBLKS: Options. (line 104) +* GDBM_GETDBNAME: Options. (line 127) +* GDBM_GETFLAGS: Options. (line 44) +* GDBM_GETMAXMAPSIZE: Options. (line 114) +* GDBM_GETMMAP: Options. (line 123) +* GDBM_GETSYNCMODE: Options. (line 74) +* GDBM_ILLEGAL_DATA: Error codes. (line 98) +* gdbm_import: Flat files. (line 46) +* GDBM_INSERT: Store. (line 23) +* GDBM_ITEM_NOT_FOUND: Error codes. (line 83) +* GDBM_MALLOC_ERROR: Error codes. (line 12) +* GDBM_NEWDB <1>: Flat files. (line 35) +* GDBM_NEWDB: Open. (line 28) +* gdbm_nextkey: Sequential. (line 24) +* GDBM_NO_ERROR: Error codes. (line 9) +* GDBM_NOLOCK <1>: Locking. (line 6) +* GDBM_NOLOCK: Open. (line 40) +* GDBM_NOMMAP: Open. (line 40) +* gdbm_open: Open. (line 9) +* GDBM_OPT_ALREADY_SET: Error codes. (line 102) +* GDBM_OPT_ILLEGAL: Error codes. (line 107) +* GDBM_READER: Open. (line 28) +* GDBM_READER_CANT_DELETE: Error codes. (line 65) +* GDBM_READER_CANT_REORGANIZE: Error codes. (line 75) +* GDBM_READER_CANT_STORE: Error codes. (line 70) +* gdbm_reorganize: Reorganization. (line 9) +* GDBM_REORGANIZE_FAILED: Error codes. (line 88) +* GDBM_REPLACE: Store. (line 23) +* GDBM_SETCACHESIZE: Options. (line 30) +* GDBM_SETCENTFREE: Options. (line 78) +* GDBM_SETCOALESCEBLKS: Options. (line 92) +* GDBM_SETMAXMAPSIZE: Options. (line 108) +* GDBM_SETMMAP: Options. (line 118) +* gdbm_setopt: Options. (line 11) +* GDBM_SETSYNCMODE: Options. (line 61) +* gdbm_store: Store. (line 8) +* gdbm_strerror: Errors. (line 9) +* gdbm_sync: Sync. (line 15) +* GDBM_SYNC <1>: Sync. (line 6) +* GDBM_SYNC: Open. (line 40) +* GDBM_SYNCMODE: Options. (line 61) +* GDBM_UNKNOWN_UPDATE: Error codes. (line 80) +* gdbm_version: Variables. (line 31) +* gdbm_version_cmp: Variables. (line 61) +* GDBM_VERSION_MAJOR: Variables. (line 45) +* GDBM_VERSION_MINOR: Variables. (line 48) +* gdbm_version_number: Variables. (line 34) +* GDBM_VERSION_PATCH: Variables. (line 51) +* GDBM_WRCREAT <1>: Flat files. (line 35) +* GDBM_WRCREAT: Open. (line 28) +* GDBM_WRITER: Open. (line 28) +* gdbmexport: gdbmexport. (line 6) +* H: shell. (line 168) +* ha: shell. (line 167) +* hash: shell. (line 166) +* hea: shell. (line 162) +* header: shell. (line 161) +* hel: shell. (line 199) +* help: shell. (line 198) +* i: shell. (line 86) +* import <1>: shell. (line 85) +* import: Flat files. (line 6) +* interactive mode, testgdbm: shell. (line 6) +* iterating over records: Sequential. (line 6) +* iteration and gdbm_delete: Sequential. (line 56) +* iteration loop: Sequential. (line 36) +* iteration loop, using NDBM: ndbm. (line 79) +* junk.gdbm: testgdbm. (line 9) +* K: shell. (line 173) +* k: shell. (line 136) +* key-zero: shell. (line 135) +* l: shell. (line 92) +* libgdbm_compat: Compatibility. (line 11) +* list: shell. (line 91) +* locking: Locking. (line 6) +* looking up records: Fetch. (line 6) +* n: shell. (line 96) +* NDBM functions: ndbm. (line 6) +* ndbm.h: Compatibility. (line 11) +* next: shell. (line 95) +* nextkey: dbm. (line 58) +* opening the database: Open. (line 6) +* options, database: Options. (line 6) +* pag file: Compatibility. (line 22) +* PAGER: shell. (line 45) +* pager, testgdbm: shell. (line 45) +* q: shell. (line 107) +* quit: shell. (line 106) +* r: shell. (line 132) +* rea: shell. (line 124) +* read: shell. (line 123) +* read-only mode, testgdbm: testgdbm. (line 16) +* record, deleting: Delete. (line 6) +* record, fetching: Fetch. (line 6) +* records, iterating over: Sequential. (line 6) +* records, storing: Store. (line 6) +* records, testing existence: Fetch. (line 34) +* reo: shell. (line 131) +* reorganization, database: Reorganization. (line 6) +* reorganize: shell. (line 130) +* S: shell. (line 178) +* s: shell. (line 112) +* sequential access: Sequential. (line 6) +* sequential access, using NDBM: ndbm. (line 79) +* sta: shell. (line 177) +* status: shell. (line 176) +* sto: shell. (line 111) +* store <1>: dbm. (line 35) +* store: shell. (line 110) +* storing records: Store. (line 6) +* synchronization, database: Sync. (line 6) +* testgdbm: testgdbm. (line 6) +* v: shell. (line 187) +* version: shell. (line 186) +* version number: Variables. (line 30) +* Z: shell. (line 192) +* z: shell. (line 137) + + + +Tag Table: +Node: Top969 +Node: Copying2861 +Node: Intro4644 +Node: List6064 +Node: Open7013 +Node: Close10327 +Node: Store10781 +Node: Fetch12757 +Node: Delete13979 +Node: Sequential14745 +Node: Reorganization17736 +Node: Sync18745 +Node: Flat files19835 +Node: Errors22437 +Node: Options23001 +Node: Locking28728 +Node: testgdbm29321 +Node: invocation30295 +Node: shell30857 +Ref: pager32774 +Ref: nul-termination33136 +Ref: testgdbm export33763 +Ref: testgdbm import34282 +Node: gdbmexport37790 +Node: Variables39049 +Node: Error codes41480 +Node: Compatibility46416 +Node: ndbm47990 +Node: dbm52828 +Node: Bugs55488 +Node: Resources56843 +Node: GNU Free Documentation License57557 +Node: Index82729 + +End Tag Table diff --git a/doc/gdbm.texinfo b/doc/gdbm.texinfo new file mode 100644 index 0000000..b4c7378 --- /dev/null +++ b/doc/gdbm.texinfo @@ -0,0 +1,1873 @@ +\input texinfo @c -*- Texinfo -*- +@comment $Id: gdbm.texinfo,v 1.21 2011/11/12 22:40:14 gray Exp $ +@comment %**start of header (This is for running Texinfo on a region.) +@setfilename gdbm.info +@include version.texi +@settitle gdbm manual + +@ifinfo +@dircategory Programming & development tools +@direntry +* GDBM: (gdbm). The GNU database manager. +@end direntry +@end ifinfo + +@c @setchapternewpage odd +@comment %**end of header (This is for running Texinfo on a region.) + +@c Use @kwindex for keywords +@defcodeindex kw +@syncodeindex kw cp +@c Use @flindex for files +@defcodeindex fl +@syncodeindex fl cp + +@c Merge all indices into a single one +@syncodeindex fn cp +@syncodeindex vr cp +@syncodeindex ky cp +@syncodeindex pg cp +@syncodeindex tp cp + +@iftex +@finalout +@end iftex + +@copying +This file documents the GNU dbm utility. + +Copyright @copyright{} 1989-1999, 2007, 2008, 2009-2011 Free Software Foundation, Inc. + +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, with the Front-Cover Texts being ``The GNU Database +Manager,'' and with the Back-Cover Texts as in (a) below. A copy of the +license is included in the section entitled ``GNU Free Documentation +License.'' + +(a) The FSF's Back-Cover Text is: ``You have the freedom to +copy and modify this GNU manual. Buying copies from the FSF +supports it in developing GNU and promoting software freedom.'' +@end copying + +@titlepage +@sp 6 +@center @titlefont{GNU dbm} +@sp 2 +@center A Database Manager +@sp 2 +@center by Philip A. Nelson, Jason Downs and Sergey Poznyakoff +@sp 4 +@center Manual by Pierre Gaumond, Philip A. Nelson, Jason Downs +@center and Sergey Poznyakoff +@sp 1 +@center Edition @value{EDITION} +@sp 1 +@center for GNU @code{dbm}, Version @value{VERSION} +@page +@vskip 0pt plus 1filll +Copyright @copyright{} 1993-1999, 2007-2011 Free Software Foundation, Inc. +@sp 2 + +This is Edition @value{EDITION} of the @cite{GNU @code{dbm} Manual}, +for @code{gdbm} Version @value{VERSION}. @* +Last updated @value{UPDATED} + +Published by the Free Software Foundation @* +675 Massachusetts Avenue, @* +Cambridge, MA 02139 USA @* + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +are preserved on all copies. + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided also that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Free Software Foundation. +@end titlepage +@page + +@ifnothtml +@page +@summarycontents +@page +@end ifnothtml +@contents + +@ifnottex +@node Top +@top The GNU database manager. + +GNU @code{dbm} is a library of functions implementing a hashed database +on a disk file. This manual documents GNU @code{dbm} Version @value{VERSION} +(@code{gdbm}). The software was originally written by Philip A. Nelson. This +document was originally written by Pierre Gaumond from texts written by +Phil. +@end ifnottex + +@menu +Introduction: + +* Copying:: Your rights. +* Intro:: Introduction to GNU dbm. +* List:: List of functions. + +Functions: + +* Open:: Opening the database. +* Close:: Closing the database. +* Store:: Inserting and replacing records in the database. +* Fetch:: Searching records in the database. +* Delete:: Removing records from the database. +* Sequential:: Sequential access to records. +* Reorganization:: Database reorganization. +* Sync:: Insure all writes to disk have competed. +* Flat files:: Export and import to Flat file format. +* Errors:: Convert internal error codes into English. +* Options:: Setting internal options. +* Locking:: File locking. + +Programs + +* testgdbm:: Test and modify a GDBM database. +* gdbmexport:: Export a database into a portable format. + +Other topics: + +* Error codes:: Error codes returned by @code{gdbm} calls. +* Variables:: Two useful variables. +* Compatibility:: Compatibility with UNIX dbm and ndbm. +* Bugs:: Problems and bugs. +* Resources:: Additional resources, + +* GNU Free Documentation License:: Document license. +* Index:: Index +@end menu + +@node Copying +@chapter Copying Conditions. +This library is @dfn{free}; this means that everyone is free to use +it and free to redistribute it on a free basis. GNU @code{dbm} (@code{gdbm}) +is not in the public domain; it is copyrighted and there +are restrictions on its distribution, but these restrictions are +designed to permit everything that a good cooperating citizen would want +to do. What is not allowed is to try to prevent others from further +sharing any version of @code{gdbm} that they might get from +you.@refill + + Specifically, we want to make sure that you have the right to give +away copies @code{gdbm}, that you receive +source code or else can get it if you want it, that you can change these +functions or use pieces of them in new free programs, and that you know +you can do these things.@refill + + To make sure that everyone has such rights, we have to forbid you to +deprive anyone else of these rights. For example, if you distribute +copies @code{gdbm}, you must give the recipients all +the rights that you have. You must make sure that they, too, receive or +can get the source code. And you must tell them their rights.@refill + + Also, for our own protection, we must make certain that everyone finds +out that there is no warranty for anything in the @code{gdbm} distribution. +If these functions are modified by someone else and passed on, we want +their recipients to know that what they have is not what we distributed, +so that any problems introduced by others will not reflect on our +reputation.@refill + +@code{Gdbm} is currently distributed under the terms of the GNU General +Public License, Version 3. (@emph{NOT} under the GNU General Library +Public License.) A copy the GNU General Public License is included with +the distribution of @code{gdbm}. + +@node Intro +@chapter Introduction to GNU @code{dbm}. + +GNU @code{dbm} (@code{gdbm}) is a library of database functions that use +extensible hashing and works similar to the standard UNIX @code{dbm} +functions. These routines are provided to a programmer needing to +create and manipulate a hashed database. (@code{gdbm} is @emph{NOT} a +complete database package for an end user.) + +The basic use of @code{gdbm} is to store key/data pairs in a data file. +Each key must be unique and each key is paired with only one data item. +The keys can not be directly accessed in sorted order. The basic unit +of data in @code{gdbm} is the structure: + +@example + typedef struct @{ + char *dptr; + int dsize; + @} datum; +@end example + +This structure allows for arbitrary sized keys and data items. + +The key/data pairs are stored in a @code{gdbm} disk file, called a +@code{gdbm} database. An application must open a @code{gdbm} database +to be able manipulate the keys and data contained in the database. +@code{gdbm} allows an application to have multiple databases open at the +same time. When an application opens a @code{gdbm} database, it is +designated as a @code{reader} or a @code{writer}. A @code{gdbm} +database can be opened by at most one writer at a time. However, many readers +may open the database simultaneously. Readers and writers can not +open the @code{gdbm} database at the same time. + +@node List +@chapter List of functions. + +The following is a quick list of the functions contained in the @code{gdbm} +library. The include file @code{gdbm.h}, that can be included by the user, +contains a definition of these functions. + +@example +#include + +GDBM_FILE gdbm_open(name, block_size, flags, mode, fatal_func); +void gdbm_close(dbf); +int gdbm_store(dbf, key, content, flag); +datum gdbm_fetch(dbf, key); +int gdbm_delete(dbf, key); +datum gdbm_firstkey(dbf); +datum gdbm_nextkey(dbf, key); +int gdbm_reorganize(dbf); +void gdbm_sync(dbf); +int gdbm_exists(dbf, key); +char *gdbm_strerror(errno); +int gdbm_setopt(dbf, option, value, size); +int gdbm_fdesc(dbf); +@end example + +The @code{gdbm.h} include file is often in the @file{/usr/local/include} +directory. (The actual location of @code{gdbm.h} depends on your local +installation of @code{gdbm}.) + +@node Open +@chapter Opening the database. + +@cindex opening the database +@cindex database, opening or creating +@deftypefn {gdbm interface} GDBM_FILE gdbm_open (const char *@var{name}, int @var{block_size}, @ + int @var{flags}, int @var{mode}, void (*fatal_func)(const char *)) +Initializes @code{gdbm} system. If the file has a size of zero bytes, a file +initialization procedure is performed, setting up the initial structure in the +file. + +The arguments are: + +@table @var +@item name +The name of the file (the complete name, @code{gdbm} does not append any +characters to this name). +@item block_size +It is used during initialization to determine the size of various +constructs. It is the size of a single transfer from disk to +memory. This parameter is ignored if the file has been previously +initialized. The minimum size is 512. If the value is less than 512, +the file system block size is used, otherwise the value of +@var{block_size} is used. +@item flags +@kwindex GDBM_READER +@kwindex GDBM_WRITER +@kwindex GDBM_WRCREAT +@kwindex GDBM_NEWDB +If @code{flags} is set to @samp{GDBM_READER}, the user wants to just read the +database and any call to @code{gdbm_store} or @code{gdbm_delete} will fail. +Many readers can access the database at the same time. If @code{flags} is +set to @samp{GDBM_WRITER}, the user wants both read and write access +to the database and requires exclusive access. If @code{flags} is set +to @samp{GDBM_WRCREAT}, the user wants both read and write access to +the database and wants it created if it does not already exist. If +@code{flags} is set to @samp{GDBM_NEWDB}, the user want a new database +created, regardless of whether one existed, and wants read and write +access to the new database. + +@kwindex GDBM_SYNC +@kwindex GDBM_NOLOCK +@kwindex GDBM_NOMMAP +The following may also be logically or'd into the database flags: +@samp{GDBM_SYNC}, which causes all database operations to be +synchronized to the disk, @samp{GDBM_NOLOCK}, which prevents the library +from performing any locking on the database file, and @samp{GDBM_NOMMAP}, +which disables the memory mapping mechanism. The option @samp{GDBM_FAST} is +now obsolete, since @code{gdbm} defaults to no-sync mode. + +@kwindex GDBM_CLOEXEC +@cindex close-on-exec +If the host @samp{open} call +@ifhtml +(@uref{http://www.manpagez.com/man/2/open, open(2)}) +@end ifhtml +@ifnothtml +(@pxref{open,,,open(2),open(2) man page}) +@end ifnothtml +supports the @samp{O_CLOEXEC} flag, the @samp{GDBM_CLOEXEC} can be +or'd into the flags, to enable the close-on-exec flag for the +database file descriptor. +@item mode +File mode (see +@ifhtml +@uref{http://www.manpagez.com/man/2/chmod}, +@end ifhtml +@ifnothtml +@ref{chmod,,change permissions of a file,chmod(2), +chmod(2) man page}, +@end ifnothtml +and +@ifhtml +@uref{http://www.manpagez.com/man/2/open}), +@end ifhtml +@ifnothtml +@pxref{open,,open a file,open(2), open(2) man page}), +@end ifnothtml +which is used if the file is created). +@item fatal_func +A function for @code{gdbm} to call if it detects a fatal error. The only +parameter of this function is a string. If the value of @samp{NULL} is +provided, @code{gdbm} will use a default function. +@end table + +The return value, is the pointer needed by all other functions to +access that @code{gdbm} file. If the return is the @samp{NULL} pointer, +@code{gdbm_open} was not successful. The errors can be found in +@code{gdbm_errno} variable (@pxref{Variables, gdbm_errno}). Available +error codes are discussed in @ref{Error codes}. + +In all of the following calls, the parameter @var{dbf} refers to the pointer +returned from @code{gdbm_open}. +@end deftypefn + +@node Close +@chapter Closing the database. +@cindex closing database +@cindex database, closing + +It is important that every file opened is also closed. This is needed to +update the reader/writer count on the file: + +@deftypefn {gdbm interface} void gdbm_close (GDBM_FILE @var{dbf}) +This function closes the @code{gdbm} file and frees all memory +associated with it. The parameter is: + +@table @var +@item dbf +The pointer returned by @code{gdbm_open}. +@end table +@end deftypefn + +@node Store +@chapter Inserting and replacing records in the database. +@cindex storing records +@cindex records, storing + +@deftypefn {gdbm interface} int gdbm_store (GDBM_FILE @var{dbf}, datum @var{key}, @ + datum @var{content}, int @var{flag}) +The function @code{gdbm_store} inserts or replaces records in the database. + +The parameters are: + +@table @var +@item dbf +The pointer returned by @code{gdbm_open}. +@item key +The search key. +@item content +The data to be associated with the key. +@item flag +@kwindex GDBM_REPLACE +@kwindex GDBM_INSERT +Defines the action to take when the key is already in the database. The value +@samp{GDBM_REPLACE} (defined in @file{gdbm.h}) asks that the old data +be replaced by the new @var{content}. The value @samp{GDBM_INSERT} +asks that an error be returned and no action taken if the @var{key} +already exists. +@end table + +This function can return the following values: + +@table @asis +@item -1 +The item was not stored in the database because the caller was not an +official writer or either @var{key} or @var{content} have a +@samp{NULL} @samp{dptr} field. + +Both @var{key} and @var{content} must have the @samp{dptr} field be a +non-@samp{NULL} value. Since a @samp{NULL} @samp{dptr} field is used by +other functions to indicate an error, it cannot be valid data. +@item +1 +The item was not stored because the argument @var{flag} was +@samp{GDBM_INSERT} and the @var{key} was already in the database. +@item 0 +No error. The value of @var{content} is keyed by @var{key}. The file +on disk is updated to reflect the structure of the new database before +returning from this function. +@end table +@end deftypefn + +If you store data for a @var{key} that is already in the data base, +@code{gdbm} replaces the old data with the new data if called with +@samp{GDBM_REPLACE}. You do not get two data items for the same +@code{key} and you do not get an error from @code{gdbm_store}. + +The size in @code{gdbm} is not restricted like @code{dbm} or @code{ndbm}. Your +data can be as large as you want. + +@node Fetch +@chapter Searching for records in the database. +@cindex fetching records +@cindex looking up records +@cindex record, fetching + +@deftypefn {gdbm interface} datum gdbm_fetch (GDBM_FILE @var{dbf}, datum @var{key}) +Looks up a given @var{key} and returns the information associated with it. +The @samp{dptr} field in the structure that is returned points to a +memory block allocated by @code{malloc}. It is the caller's +responsibility to free it when no longer needed. + +If the @samp{dptr} is @samp{NULL}, no data was found. + +The parameters are: + +@table @var +@item dbf +The pointer returned by @code{gdbm_open}. +@item key +The search key. +@end table +@end deftypefn + +An example of using this function: + +@example +content = gdbm_fetch (dbf, key); +if (content.dptr == NULL) + @{ + fprintf(stderr, "key not found\n"); + @} +else + @{ + /* do something with content.dptr */ + @} +@end example + +@cindex records, testing existence +You may also search for a particular key without retrieving it: + +@deftypefn {gdbm interface} int gdbm_exists (GDBM_FILE @var{dbf}, datum @var{key}) +Returns @samp{true} (@samp{1}) if the @var{key} exists in @var{dbf} +and @samp{false} (@samp{0}) otherwise. + +The parameters are: + +@table @var +@item dbf +The pointer returned by @code{gdbm_open}. +@item key +The search key. +@end table +@end deftypefn + +@node Delete +@chapter Removing records from the database. +@cindex deleting records +@cindex record, deleting + +To remove some data from the database, use the @code{gdbm_delete} +function. + +@deftypefn {gdbm interface} int gdbm_delete (GDBM_FILE @var{dbf}, datum @var{key}) +Deletes the data associated with the given @var{key}, if it exists in +the database @var{dbf}. The file on disk is updated to reflect the +structure of the new database before returning from this function. + +The parameters are: + +@table @var +@item dbf +The pointer returned by @code{gdbm_open}. +@item datum key +The search key. +@end table + +The function returns @samp{-1} if the item is not present or the +requester is a reader. The return of @samp{0} marks a successful delete. +@end deftypefn + +@node Sequential +@chapter Sequential access to records. +@cindex sequential access +@cindex iterating over records +@cindex records, iterating over + +The next two functions allow for accessing all items in the database. This +access is not @code{key} sequential, but it is guaranteed to visit every +@code{key} in the database once. The order has to do with the hash values. +@code{gdbm_firstkey} starts the visit of all keys in the database. +@code{gdbm_nextkey} finds and reads the next entry in the hash structure for +@code{dbf}. + +@deftypefn {gdbm interface} datum gdbm_firstkey (GDBM_FILE @var{dbf}) +Initiate sequential access to the database @var{dbf}. The returned +value is the first key accessed in the database. If the @samp{dptr} +field in the returned datum is @samp{NULL}, the database contains no +data. + +Otherwise, @samp{dptr} points to a memory block obtained from +@code{malloc}, which holds the key value. The caller is responsible +for freeing this memory block when no longer needed. +@end deftypefn + +@deftypefn {gdbm interface} datum gdbm_nextkey (GDBM_FILE @var{dbf}, datum @var{prev}) +This function continues the iteration over the keys in @var{dbf}, +initiated by @code{gdbm_firstkey}. The parameter @var{prev} holds the +value returned from a previous call to @code{gdbm_nextkey} or +@code{gdbm_firstkey}. + +The function returns next key from the database. If the @samp{dptr} +field in the returned datum is @samp{NULL}, all keys in the database +has been visited. + +Otherwise, @samp{dptr} points to a memory block obtained from +@code{malloc}, which holds the key value. The caller is responsible +for freeing this memory block when no longer needed. +@end deftypefn + +@cindex iteration loop +These functions were intended to visit the database in read-only algorithms, +for instance, to validate the database or similar operations. The +usual algorithm for sequential access is: + +@example +@group + key = gdbm_firstkey (dbf); + while (key.dptr) + @{ + datum nextkey; + + /* do something with the key */ + ... + + /* Obtain the next key */ + nextkey = gdbm_nextkey (dbf, key); + /* Reclaim the memory used by the key */ + free (key.dptr); + /* Use nextkey in the next iteration. */ + key = nextkey; + @} +@end group +@end example + +@cindex iteration and @code{gdbm_delete} +@cindex deletion in iteration loops +@cindex @code{gdbm_delete} and sequential access +Care should be taken when the @code{gdbm_delete} function is used in +such a loop. File visiting is based on a @dfn{hash table}. The +@code{gdbm_delete} function re-arranges the hash table to make sure +that any collisions in the table do not leave some item +@dfn{un-findable}. The original key order is @emph{not} guaranteed to +remain unchanged in all instances. So it is possible that some key +will not be visited if a loop like the following is executed: + +@example +@group + key = gdbm_firstkey (dbf); + while (key.dptr) + @{ + datum nextkey; + if (some condition) + @{ + gdbm_delete (dbf, key); + @} + nextkey = gdbm_nextkey (dbf, key); + free (key.dptr); + key = nextkey; + @} +@end group +@end example + +@node Reorganization +@chapter Database reorganization. +@cindex database reorganization +@cindex reorganization, database + +The following function should be used very seldom. + +@deftypefn {gdbm interface} int gdbm_reorganize (GDBM_FILE @var{dbf}) +Reorganizes the database. + +The parameter is: + +@table @var +@item dbf +The pointer returned by @code{gdbm_open}. +@end table +@end deftypefn + +If you have had a lot of deletions and would like to shrink the space +used by the @code{gdbm} file, this function will reorganize the database. +This results, in particular, in shortening the length of a @code{gdbm} +file by removing the space occupied by deleted records. + +This reorganization requires creating a new file and inserting all the elements +in the old file @var{dbf} into the new file. The new file is then renamed to +the same name as the old file and @var{dbf} is updated to contain all the +correct information about the new file. If an error is detected, the return +value is negative. The value zero is returned after a successful +reorganization. + +@node Sync +@chapter Database Synchronization +@cindex database synchronization +@cindex synchronization, database + +@kwindex GDBM_SYNC +Unless your database was opened with the @samp{GDBM_SYNC} flag, +@code{gdbm} does not wait for writes to be flushed to the disk before +continuing. This allows for faster writing of databases at the risk +of having a corrupted database if the application terminates in an +abnormal fashion. The following function allows the programmer to +make sure the disk version of the database has been completely updated +with all changes to the current time. + +@deftypefn {gdbm interface} void gdbm_sync (GDBM_FILE @var{dbf}) +Synchronizes the changes in @var{dbf} with its disk file. The +parameter is a pointer returned by @code{gdbm_open}. + +This function would usually be called after a complete set of changes +have been made to the database and before some long waiting time. +The @code{gdbm_close} function automatically calls the equivalent of +@code{gdbm_sync} so no call is needed if the database is to be closed +immediately after the set of changes have been made. +@end deftypefn + +@node Flat files +@chapter Export and Import +@cindex Flat file format +@cindex export +@cindex import +@code{Gdbm} databases can be converted into a portable @dfn{flat +format}. This format can be used, for example, to migrate between +the different versions of @code{gdbm} databases. Generally speaking, +flat files are safe to send over the network, and can be used to +recreate the database on another machine. The recreated database is +guaranteed to be a byte-to-byte equivalent of the database from which +the flat file was created. This does not necessarily mean, however, +that this file can be used in the same way as the original one. For +example, if the original database contained non-@acronym{ASCII} data +(e.g. @acronym{C} structures, integers etc.), the recreated database +can be of any use only if the target machine has the same integer +size and byte ordering as the source one and if its @acronym{C} +compiler uses the same packing conventions as the one which generated +@acronym{C} which populated the original database. In general, such +binary databases are not portable between machines, unless you follow +some stringent rules on what data is written to them and how it is +interpreted. + +@deftypefn {gdbm interface} int gdbm_export (GDBM_FILE @var{dbf}, @ + const char *@var{exportfile}, int @var{flag}, int @var{mode}) +Create a flat file from the @code{gdbm} database. The parameters are: + +@table @var +@item dbf +A pointer to the source database, returned by a call to +@code{gdbm_open}. The database must be open in @samp{GDBM_WRITER} mode. + +@item exportfile +The name of the output file. + +@item flag +@kwindex GDBM_WRCREAT +@kwindex GDBM_NEWDB +How to create the output file. If @var{flag} is @samp{GDBM_WRCREAT}, +the file will be created if it does not exist already. Otherwise, if +it is @samp{GDBM_NEWDB}, it will be created if it does not exist, and +truncated otherwise. + +@item mode +The permissions to use when creating the output file. +See @ifhtml +@uref{http://www.manpagez.com/man/2/open}, +@end ifhtml +@ifnothtml +@ref{open,,open a file,open(2), open(2) man page}, +@end ifnothtml +for a detailed discussion. +@end table +@end deftypefn + +@deftypefn {gdbm interface} int gdbm_import (GDBM_FILE @var{dbf}, @ + const char *@var{importfile}, int @var{flag}) +Populates the database from an existing flat file. + +@table @var +@item dbf +A pointer to the source database, returned by a call to +@code{gdbm_open}. The database must be open in @samp{GDBM_WRITER} mode. + +@item importfile +The name of the input flat file. The file must exist. + +@item flag +The @var{flag} argument to be passed to @code{gdbm_store} function +when adding new records. @xref{Store}, for a description of its +effect. +@end table +@end deftypefn + +See also @ref{gdbmexport}, @ref{testgdbm export}, and +@ref{testgdbm import}. + +@node Errors +@chapter Error strings. +@cindex error strings + +To convert a @code{gdbm} error code into English text, use this +routine: + +@deftypefn {gdbm interface} {const char *} gdbm_strerror (gdbm_error @var{errno}) +Converts @var{errno} (which is an integer value) into a human-readable +descriptive text. Returns a pointer to a static string. The caller +must not alter or free the returned pointer. + +The @var{errno} argument is usually the value of the global variable +@code{gdbm_errno}. @xref{Variables, gdbm_errno}. +@end deftypefn + +@node Options +@chapter Setting options +@cindex database options +@cindex options, database + +@code{Gdbm} supports the ability to set certain options on an already +open database. + +@deftypefn {gdbm interface} int gdbm_setopt (GDBM_FILE @var{dbf}, int @var{option}, @ + void *@var{value}, int @var{size}) +Sets an option on the database or returns the value of an option. + +The parameters are: + +@table @var +@item dbf +The pointer returned by @code{gdbm_open}. +@item option +The option to be set or retreived. +@item value +A pointer to the value to which @var{option} will be set or where to +place the option value (depending on the option). +@item size +The length of the data pointed to by @var{value}. +@end table +@end deftypefn + +The valid options are: + +@table @asis +@kwindex GDBM_CACHESIZE +@kwindex GDBM_SETCACHESIZE +@item GDBM_SETCACHESIZE +@itemx GDBM_CACHESIZE +Set the size of the internal bucket cache. This option may only be +set once on each GDBM_FILE descriptor, and is set automatically to 100 +upon the first access to the database. The @var{value} should point +to a @code{size_t} holding the desired cache size. + +The @samp{GDBM_CACHESIZE} option is provided for compatibility with +earlier versions. + +@kwindex GDBM_GETCACHESIZE +@item GDBM_GETCACHESIZE +Return the size of the internal bucket cache. The @var{value} should +point to a @code{size_t} variable, where the size will be stored. + +@kwindex GDBM_GETFLAGS +@item GDBM_GETFLAGS +Return the flags describing the state of the database. The @var{value} should +point to a @code{int} variable where to store the flags. The return +is the same as the flags used when opening the database (@pxref{Open, +gdbm_open}), except that it reflects the current state (which may have +been altered by another calls to @code{gdbm_setopt}. + +@kwindex GDBM_FASTMODE +@item GDBM_FASTMODE +Enable or disable the @dfn{fast writes mode}, i.e. writes without +subsequent synchronization. The @var{value} should point +to an integer: @samp{TRUE} to enable fast mode, and @samp{FALSE} to +disable it. + +This option is retained for compatibility with previous versions of +@code{gdbm}. Its effect is the reverse of @code{GDBM_SETSYNCMODE} +(see below). + +@kwindex GDBM_SETSYNCMODE +@kwindex GDBM_SYNCMODE +@item GDBM_SETSYNCMODE +@itemx GDBM_SYNCMODE +Turn on or off file system synchronization operations. This +setting defaults to off. The @var{value} should point +to an integer: @samp{TRUE} to turn synchronization on, and @samp{FALSE} to +turn it off. + +Note, that this option is a reverse of @code{GDBM_FASTMODE}, +i.e. calling @code{GDBM_SETSYNCMODE} with @samp{TRUE} has the same effect +as calling @code{GDBM_FASTMODE} with @samp{FALSE}. + +The @samp{GDBM_SYNCMODE} option is provided for compatibility with +earlier versions. + +@kwindex GDBM_GETSYNCMODE +@item GDBM_GETSYNCMODE +Return the current synchronization status. The @var{value} should +point to an @code{int} where the status will be stored. + +@kwindex GDBM_SETCENTFREE +@kwindex GDBM_CENTFREE +@item GDBM_SETCENTFREE +@itemx GDBM_CENTFREE +@emph{NOTICE: This feature is still under study.} + +Set central free block pool to either on or off. The default is off, +which is how previous versions of @code{gdbm} handled free blocks. If +set, this option causes all subsequent free blocks to be placed in the +@emph{global} pool, allowing (in theory) more file space to be reused +more quickly. The @var{value} should point to an integer: @samp{TRUE} to +turn central block pool on, and @samp{FALSE} to turn it off. + +The @samp{GDBM_CENTFREE} option is provided for compatibility with +earlier versions. + +@kwindex GDBM_SETCOALESCEBLKS +@kwindex GDBM_COALESCEBLKS +@item GDBM_SETCOALESCEBLKS +@itemx GDBM_COALESCEBLKS +@emph{NOTICE: This feature is still under study.} + +Set free block merging to either on or off. The default is off, which +is how previous versions of @code{gdbm} handled free blocks. If set, +this option causes adjacent free blocks to be merged. This can become +a @acronym{CPU} expensive process with time, though, especially if +used in conjunction with GDBM_CENTFREE. The @var{value} should point +to an integer: @samp{TRUE} to turn free block merging on, and @samp{FALSE} to +turn it off. + +@kwindex GDBM_GETCOALESCEBLKS +@item GDBM_GETCOALESCEBLKS +Return the current status of free block merging. The @var{value} should +point to an @code{int} where the status will be stored. + +@kwindex GDBM_SETMAXMAPSIZE +@item GDBM_SETMAXMAPSIZE +Sets maximum size of a memory mapped region. The @var{value} should +point to a value of type @code{size_t}, @code{unsigned long} or +@code{unsigned}. The actual value is rounded to the nearest page +boundary (the page size is obtained from +@code{sysconf(_SC_PAGESIZE)}). + +@kwindex GDBM_GETMAXMAPSIZE +@item GDBM_GETMAXMAPSIZE +Return the maximum size of a memory mapped region. The @var{value} should +point to a value of type @code{size_t} where to return the data. + +@kwindex GDBM_SETMMAP +@item GDBM_SETMMAP +Enable or disable memory mapping mode. The @var{value} should point +to an integer: @samp{TRUE} to enable memory mapping or @samp{FALSE} to +disable it. + +@kwindex GDBM_GETMMAP +@item GDBM_GETMMAP +Check whether memory mapping is enabled. The @var{value} should point +to an integer where to return the status. + +@kwindex GDBM_GETDBNAME +@item GDBM_GETDBNAME +Return the name of the database disk file. The @var{value} should +point to a variable of type @code{char**}. A pointer to the newly +allocated copy of the file name will be placed there. The caller is +responsible for freeing this memory when no longer needed. For +example: + +@example +char *name; + +if (gdbm_setopt (dbf, GDBM_GETDBNAME, &name, sizeof (name))) + @{ + fprintf (stderr, "gdbm_setopt failed: %s\n", + gdbm_strerror (gdbm_errno)); + @} +else + @{ + printf ("database name: %s\n", name); + free (name); + @} +@end example + +@end table + +The return value will be @samp{-1} upon failure, or @samp{0} upon +success. The global variable @code{gdbm_errno} will be set upon failure. + +For instance, to set a database to use a cache of 10, after opening it +with @code{gdbm_open}, but prior to accessing it in any way, the following +code could be used: + +@example +@group +int value = 10; +ret = gdbm_setopt (dbf, GDBM_CACHESIZE, &value, sizeof (int)); +@end group +@end example + +@node Locking +@chapter File Locking. +@cindex locking + +@kwindex GDBM_NOLOCK +With locking disabled (if @code{gdbm_open} was called with @samp{GDBM_NOLOCK}), +the user may want to perform their own file locking on the database file +in order to prevent multiple writers operating on the same file +simultaneously. + +In order to support this, the @code{gdbm_fdesc} routine is provided. + +@deftypefn {gdbm interface} int gdbm_fdesc (GDBM_FILE @var{dbf}) +Returns the file descriptor of the database @var{dbf}. This value +can be used as an argument to @code{flock}, @code{lockf} or similar +calls. +@end deftypefn + +@node testgdbm +@chapter Test and modify a GDBM database. +@cindex testgdbm + +The @command{testgdbm} utility allows you to view and modify an +existing @acronym{GDBM} database or to create a new one. + +@cindex default database, @command{testgdbm} +@cindex @option{-g}, @command{testgdbm} option +@flindex junk.gdbm +When invoked without options, it tries to open a database file called +@file{junk.gdbm}, located in the current working directory. You can +change this default using the @option{-g} command line option. This +option takes a single argument, specifying the file name to open, e.g.: + +@example +$ testgdbm -g file.db +@end example + +@cindex read-only mode, @command{testgdbm} +@cindex @option{-r}, @command{testgdbm} option +The database will be opened in read-write mode, unless the @option{-r} +option is specified, in which case it will be opened only for reading. + +@cindex creating a database, @command{testgdbm} +@cindex @option{-n}, @command{testgdbm} option +If the database does not exist, @command{testgdbm} will create it. +There is a special option @option{-n}, which instructs the utility to +create a new database. If it is used and if the database already +exists, it will be deleted, so use it sparingly. + +@menu +* invocation:: +* shell:: +@end menu + +@node invocation +@section testgdbm invocation +@cindex command line options, @command{testgdbm} + +The following table summarizes all @command{testgdbm} command line +options: + +@table @option +@item -b @var{size} +Set block size. +@item -c @var{size} +Set cache size. +@item -g @var{file} +Operate on @var{file} instead of the default @file{junk.gdbm}. +@item -h +Print a concise help summary. +@item -n +Create the database. +@item -r +Open the database in read-only mode. +@item -s +Synchronize to the disk after each write. +@item -v +Print program version and licensing information and exit. +@end table + +@node shell +@section testgdbm interactive mode +@cindex interactive mode, @command{testgdbm} + +After successful startup, @command{testgdbm} starts a loop, in which +it reads commands from the user, executes them and prints the results +on the standard output. If the standard input is attached to a console, +@command{testgdbm} runs in interactive mode, which is indicated by its +@dfn{prompt}: + +@example +testgdbm> _ +@end example + +The utility finishes when it reads the @samp{quit} command (see below) or +detects end-of-file on its standard input, whichever occurs first. + +A @command{testgdbm} command consists of a @dfn{command verb}, +optionally followed by one or two @dfn{arguments}, separated by any +amount of white space. A command verb can be entered either in full +or in an abbreviated form, as long as that abbreviation does not match +any other verb. For example, @samp{co} can be used instead of +@samp{count} and @samp{ca} instead of @samp{cache}. Furthermore, +many command verbs also have single-letter forms, called @dfn{command +letters}. + +An argument is any sequence of non-whitespace characters. Notice, +that currently there is no way to enter arguments containing white +space. This limitation will be removed in future releases. + +Each command takes at most two @dfn{formal parameters}, which can be +optional or mandatory. If the number of actual arguments is less than the +number of mandatory parameters, @command{testgdbm} will prompt you to +supply missing arguments. For example, the @samp{store} command takes two +mandatory parameters, so if you invoked it with no arguments, you +would be prompted twice to supply the necessary data, as shown in +example below: + +@example +testgdbm> @kbd{store} +key> @kbd{three} +data> @kbd{3} +@end example + +However, such prompting is possible only in interactive mode. In +non-interactive mode (e.g. when running a script), all arguments must +be supplied with each command, otherwise @command{testgdbm} will report an +error and exit immediately. + +@anchor{pager} +@cindex pager, @command{testgdbm} +@cindex @env{PAGER} +Some commands produce excessive amounts of output. To help you follow +it, @command{testgdbm} uses a pager utility to display such +output. The name of the pager utility is taken from the environment +variable @env{PAGER}. The pager is invoked only in interactive mode +and only if the estimated number of output lines is greater then the +number of lines on your screen. + +@anchor{nul-termination} +Many of the @command{testgdbm} commands operate on database key and +data values. The utility assumes that both keys and data are +@acronym{ASCII} strings, either nul-terminated or not. By default, +it is assumed that strings are nul-terminated. You can change this +by using @code{z} (@code{key-zero}, for keys) and @code{Z} +(@code{data-zero}, for data) commands. + +The following table summarizes all available commands: + +@deffn {command verb} count +@deffnx {command abbrev} co +@deffnx {command letter} c +Print the number of entries in the database. +@end deffn + +@deffn {command verb} delete @var{key} +@deffnx {command abbrev} de @var{key} +@deffnx {command letter} d @var{key} +Delete entry with a given @var{key} +@end deffn + +@anchor{testgdbm export} +@deffn {command verb} export @var{file-name} [truncate] +@deffnx {command abbrev} e @var{file-name} [truncate] +Export the database to the flat file @var{file-name}. @xref{Flat files}, +for a description of the flat file format and its purposes. This +command will not overwrite an existing file, unless the word +@samp{truncate} is given as its second argument. + +See also @ref{gdbmexport}. +@end deffn + +@deffn {command verb} fetch @var{key} +@deffnx {command abbrev} fe @var{key} +@deffnx {command letter} f @var{key} +Fetch and display a record with the given @var{key}. +@end deffn + +@anchor{testgdbm import} +@deffn {command verb} import @var{file-name} [replace] +@deffnx {command abbrev} i @var{file-name} [replace] +Import data from a flat dump file @var{file-name} +(@pxref{Flat files}). If the word @samp{replace} is given +as the second argument, any records with the same keys as the already +existing ones will replace them. +@end deffn + +@deffn {command verb} list +@deffnx {command abbrev} l +List the contents of the database (@pxref{pager}). +@end deffn + +@deffn {command verb} next [@var{key}] +@deffnx {command abbrev} n [@var{key}] +Sequential access: fetch and display a next record. If @var{key} is +given, a record following one with this key will be fetched. +Otherwise, the key supplied by the latest @code{1}, @code{2} or +@var{n} command will be used. + +See also @code{first}, below. + +@xref{Sequential}, for more information on sequential access. +@end deffn + +@deffn {command verb} quit +@deffnx {command abbrev} q +Close the database and quit the utility. +@end deffn + +@deffn {command verb} store @var{key} @var{data} +@deffnx {command abbrev} sto @var{key} @var{data} +@deffnx {command letter} s @var{key} @var{data} +Store the @var{data} with @var{key} in the database. If @var{key} +already exists, its data will be replaced. +@end deffn + +@deffn {command verb} first +@deffnx {command abbrev} fi +@deffnx {command letter} 1 +Fetch and display the first record in the database. Subsequent +records can be fetched using @code{next} command (see above). +@xref{Sequential}, for more information on sequential access. +@end deffn + +@deffn {command verb} read @var{file} [replace] +@deffnx {command abbrev} rea @var{file} [replace] +@deffnx {command letter} < @var{file} [replace] +Read entries from @var{file} and store them in the database. If the +word @samp{replace} is given as the second argument, any existing +records with matching keys will be replaced. +@end deffn + +@deffn {command verb} reorganize +@deffnx {command abbrev} reo +@deffnx {command letter} r +Reorganize the database (@pxref{Reorganization}). +@end deffn + +@deffn {command verb} key-zero +@deffnx {command abbrev} k +@deffnx {command letter} z +Toggle key nul-termination. Use @code{status} to inspect the current +state. @xref{nul-termination}. +@end deffn + +@deffn {command verb} avail +@deffnx {command abbrev} a +@deffnx {command letter} A +Print the @dfn{avail list}. +@end deffn + +@deffn {command verb} bucket +@deffnx {command abbrev} b +@deffnx {command letter} B +Print the bucket number @var{num}. +@end deffn + +@deffn {command verb} current +@deffnx {command abbrev} cu +@deffnx {command letter} C +Print the current bucket. +@end deffn + +@deffn {command verb} dir +@deffnx {command abbrev} di +@deffnx {command letter} D +Print hash directory. +@end deffn + +@deffn {command verb} header +@deffnx {command abbrev} hea +@deffnx {command letter} F +Print file header. +@end deffn + +@deffn {command verb} hash @var{key} +@deffnx {command abbrev} ha @var{key} +@deffnx {command letter} H @var{key} +Compute and display the hash value for the given @var{key}. +@end deffn + +@deffn {command verb} cache +@deffnx {command abbrev} ca +@deffnx {command letter} K +Print the bucket cache. +@end deffn + +@deffn {command verb} status +@deffnx {command abbrev} sta +@deffnx {command letter} S +Print current program status. The following example shows the +information displayed: + +@example +Database file: junk.gdbm +Zero terminated keys: yes +Zero terminated data: yes +@end example +@end deffn + +@deffn {command verb} version +@deffnx {command abbrev} v +Print the version of @command{gdbm}. +@end deffn + +@deffn {command verb} data-zero +@deffnx {command abbrev} da +@deffnx {command letter} Z +Toggle data nul-termination. Use @code{status} to examine the current +status. + +@xref{nul-termination}. +@end deffn + +@deffn {command verb} help +@deffnx {command abbrev} hel +@deffnx {command letter} ? +Print a concise command summary, showing each command letter and verb +with its parameters and a short description of what it does. Optional +arguments are enclosed in square brackets. +@end deffn + +@node gdbmexport +@chapter Export a database into a portable format. +@pindex gdbmexport + +The @command{gdbmexport} utility converts the database into a portable +@dfn{flat format}. Files in this format can be used to populate +databases using the @code{gdbm_import} function (@pxref{Flat files, +gdbm_import}) or the @code{i} command of @command{testgdbm} utility +(@pxref{testgdbm import}). In many cases files in this format are suitable for +sending over the network to populate the database on another machine. +The only exception to this are databases whose records contain +non-@acronym{ASCII} data (e.g. @acronym{C} structures, integers +etc.). For such databases you will be better off by writing a +specialized utility to convert them to an architecture-independent +format. + +If @command{gdbmexport} is linked with @file{libgdbm} +version 1.8.3, it can be used to convert databases from old to new +format. + +The utility takes two mandatory arguments: the name of the database +file to convert and the output file name, e.g.: + +@example +$ gdbmexport junk.gdbm junk.flat +@end example + +In addition two options are understood: + +@table @option +@item -h +Display short usage summary and exit. + +@item -v +Display program version and licensing information, and exit. +@end table + +@node Variables +@chapter Useful global variables. + +The following global variables and constants are available: + +@deftypevar gdbm_error gdbm_errno +This variable contains error code from the last failed @code{gdbm} +call. @xref{Error codes}, for a list of available error codes and +their descriptions. + +Use @code{gdbm_strerror} (@pxref{Errors}) to convert it to a +descriptive text. +@end deftypevar + +@deftypevar {const char *} gdbm_errlist[] +This variable is an array of error descriptions, which is used by +@code{gdbm_strerror} to convert error codes to human-readable text +(@pxref{Errors}). You can access it directly, if you wish so. It +contains @code{_GDBM_MAX_ERRNO + 1} elements and can be directly +indexed by the error code to obtain a corresponding descriptive +text. +@end deftypevar + +@defvr {Constant} _GDBM_MIN_ERRNO +The minimum error code used by @code{gdbm}. +@end defvr + +@defvr {Constant} _GDBM_MAX_ERRNO +The maximum error code used by @code{gdbm}. +@end defvr + +@cindex version number +@deftypevar {const char *} gdbm_version +A string containing the version information. +@end deftypevar + +@deftypevar {int const} gdbm_version_number[3] +This variable contains the @code{gdbm} version numbers: + +@multitable @columnfractions 0.4 0.5 +@headitem Index @tab Meaning +@item 0 @tab Major number +@item 1 @tab Minor number +@item 2 @tab Patchlevel number +@end multitable + +Additionally, the following constants are defined in the @file{gdbm.h} +file: + +@table @asis +@kwindex GDBM_VERSION_MAJOR +@item GDBM_VERSION_MAJOR +Major number. + +@kwindex GDBM_VERSION_MINOR +@item GDBM_VERSION_MINOR +Minor number. + +@kwindex GDBM_VERSION_PATCH +@item GDBM_VERSION_PATCH +Patchlevel number. +@end table + +These can be used to verify whether the header file matches the library. +@end deftypevar + +To compare two split-out version numbers, use the following function: + +@deftypefn {gdbm interface} int gdbm_version_cmp (int const @var{a}[3], @ + int const @var{b}[3]) +Compare two version numbers. Return @samp{-1} if @var{a} is less than +@var{b}, @samp{1} if @var{a} is greater than @var{b} and @samp{0} if +they are equal. + +Comparison is done from left to right, so that: + +@example +a = @{ 1, 8, 3 @}; +b = @{ 1, 8, 3 @}; +gdbm_version_cmp (a, b) @result{} 0 + +a = @{ 1, 8, 3 @}; +b = @{ 1, 8, 2 @}; +gdbm_version_cmp (a, b) @result{} 1 + +a = @{ 1, 8, 3 @}; +b = @{ 1, 9. 0 @}; +gdbm_version_cmp (a, b) @result{} -1 +@end example +@end deftypefn + +@node Error codes +@chapter Error codes +@cindex error codes + +This chapter summarizes the error codes which can be set by the +functions in @code{gdbm} library. + +@table @asis +@kwindex GDBM_NO_ERROR +@item GDBM_NO_ERROR +No error occurred. + +@kwindex GDBM_MALLOC_ERROR +@item GDBM_MALLOC_ERROR +Memory allocation failed. Not enough memory. + +@kwindex GDBM_BLOCK_SIZE_ERROR +@item GDBM_BLOCK_SIZE_ERROR +This error is set by the @code{gdbm_open} function (@pxref{Open}), if +the value of its @var{block_size} argument is incorrect. + +@kwindex GDBM_FILE_OPEN_ERROR +@item GDBM_FILE_OPEN_ERROR +The library was not able to open a disk file. This can be set by +@code{gdbm_open} (@pxref{Open}), @code{gdbm_export} and +@code{gdbm_import} functions (@pxref{Flat files}). + +Inspect the value of the system @code{errno} variable to get more +detailed diagnostics. + +@kwindex GDBM_FILE_WRITE_ERROR +@item GDBM_FILE_WRITE_ERROR +Writing to a disk file failed. This can be set by +@code{gdbm_open} (@pxref{Open}), @code{gdbm_export} and +@code{gdbm_import} functions. + +Inspect the value of the system @code{errno} variable to get more +detailed diagnostics. + +@kwindex GDBM_FILE_SEEK_ERROR +@item GDBM_FILE_SEEK_ERROR +Positioning in a disk file failed. This can be set by +@code{gdbm_open} (@pxref{Open}) function. + +Inspect the value of the system @code{errno} variable to get a more +detailed diagnostics. + +@kwindex GDBM_FILE_READ_ERROR +@item GDBM_FILE_READ_ERROR +Reading from a disk file failed. This can be set by +@code{gdbm_open} (@pxref{Open}), @code{gdbm_export} and +@code{gdbm_import} functions. + +Inspect the value of the system @code{errno} variable to get a more +detailed diagnostics. + +@kwindex GDBM_BAD_MAGIC_NUMBER +@item GDBM_BAD_MAGIC_NUMBER +The file given as argument to @code{gdbm_open} function is not a valid +@code{gdbm} file: it has a wrong magic number. + +@kwindex GDBM_EMPTY_DATABASE +@item GDBM_EMPTY_DATABASE +The file given as argument to @code{gdbm_open} function is not a valid +@code{gdbm} file: it has zero length. + +@kwindex GDBM_CANT_BE_READER +@item GDBM_CANT_BE_READER +This error code is set by the @code{gdbm_open} function if it is not +able to lock file when called in @samp{GDBM_READER} mode (@pxref{Open, +GDBM_READER}). + +@kwindex GDBM_CANT_BE_WRITER +@item GDBM_CANT_BE_WRITER +This error code is set by the @code{gdbm_open} function if it is not +able to lock file when called in writer mode (@pxref{Open}). + +@kwindex GDBM_READER_CANT_DELETE +@item GDBM_READER_CANT_DELETE +Set by the @code{gdbm_delete} (@pxref{Delete}) if it attempted to +operate on a database that is open in read-only mode (@pxref{Open, +GDBM_READER}). + +@kwindex GDBM_READER_CANT_STORE +@item GDBM_READER_CANT_STORE +Set by the @code{gdbm_store} (@pxref{Store}) if it attempted to +operate on a database that is open in read-only mode (@pxref{Open, +GDBM_READER}). + +@kwindex GDBM_READER_CANT_REORGANIZE +@item GDBM_READER_CANT_REORGANIZE +Set by the @code{gdbm_reorganize} (@pxref{Reorganization}) if it attempted to +operate on a database that is open in read-only mode (@pxref{Open, +GDBM_READER}). + +@kwindex GDBM_UNKNOWN_UPDATE +@item GDBM_UNKNOWN_UPDATE +Currently unused. Reserved for future uses. + +@kwindex GDBM_ITEM_NOT_FOUND +@item GDBM_ITEM_NOT_FOUND +Requested item was not found. This error is set by @code{gdbm_delete} +(@pxref{Delete}) and @code{gdbm_fetch} (@pxref{Fetch}) when the requested +@var{key} value is not found in the database. + +@kwindex GDBM_REORGANIZE_FAILED +@item GDBM_REORGANIZE_FAILED +The @code{gdbm_reorganize} function is not +able to create a temporary database. @xref{Reorganization}. + +@kwindex GDBM_CANNOT_REPLACE +@item GDBM_CANNOT_REPLACE +Cannot replace existing item. This error is set by the +@code{gdbm_store} if the requested @var{key} value is found in the +database and the @var{flag} parameter is not @samp{GDBM_REPLACE}. +@xref{Store}, for a detailed discussion. + +@kwindex GDBM_ILLEGAL_DATA +@item GDBM_ILLEGAL_DATA +Either @var{key} or @var{content} parameter was wrong in a call to +to @code{gdbm_store} (@pxref{Store}). + +@kwindex GDBM_OPT_ALREADY_SET +@item GDBM_OPT_ALREADY_SET +Requested option can be set only once and was already set. This error +is returned by the @code{gdbm_setopt} function. @xref{Options, +GDBM_CACHESIZE}. + +@kwindex GDBM_OPT_ILLEGAL +@item GDBM_OPT_ILLEGAL +The @var{option} argument is not valid or the @var{value} argument +points to an invalid value in a call to @code{gdbm_setopt} function. +@xref{Options}. + +@kwindex GDBM_BYTE_SWAPPED +@item GDBM_BYTE_SWAPPED +The @code{gdbm_open} function (@pxref{Open}) attempts to open a +database which is created on a machine with different byte ordering. + +@kwindex GDBM_BAD_FILE_OFFSET +@item GDBM_BAD_FILE_OFFSET +The @code{gdbm_open} function (@pxref{Open}) sets this error code if +the file it tries to open has a wrong magic number. + +@kwindex GDBM_BAD_OPEN_FLAGS +@item GDBM_BAD_OPEN_FLAGS +Set by the @code{gdbm_export} function if supplied an invalid +@var{flags} argument. @xref{Flat files}. + +@kwindex GDBM_FILE_STAT_ERROR +@item GDBM_FILE_STAT_ERROR +Getting information about a disk file failed. The system @code{errno} +will give more details about the error. + +This error can be set by the following functions: @code{gdbm_open}, +@code{gdbm_reorganize}. + +@kwindex GDBM_FILE_EOF +@item GDBM_FILE_EOF +End of file was encountered where more data was expected to be +present. This error can occur when fetching data from the database +and usually means that the database is truncated or otherwise corrupted. + +This error can be set by any GDBM function that does I/O. Some of +these functions are: @code{gdbm_delete}, @code{gdbm_exists}, +@code{gdbm_fetch}, @code{gdbm_export}, @code{gdbm_import}, +@code{gdbm_reorganize}, @code{gdbm_firstkey}, @code{gdbm_nextkey}, +@code{gdbm_store}. +@end table + +@node Compatibility +@chapter Compatibility with standard @code{dbm} and @code{ndbm}. + +@cindex compatibility layer +@code{Gdbm} includes a compatibility layer, which provides traditional +@samp{ndbm} and older @samp{dbm} functions. The layer is compiled and +installed if the @option{--enable-libgdbm-compat} option is used when +configuring the package. + +@findex ndbm.h +@findex dbm.h +@findex libgdbm_compat +The compatibility layer consists of two header files: @file{ndbm.h} +and @file{dbm.h} and the @file{libgdbm_compat} library. + +Older programs using @code{ndbm} or @code{dbm} interfaces can +use @file{libgdbm_compat} without any changes. To link a program with +the compatibility library, add the following two options to the +@command{cc} invocation: @option{-lgdbm -lgdbm_compat}. The @option{-L} +option may also be required, depending on where @code{gdbm} is +installed, e.g.: + +@example +cc ... -L/usr/local/lib -lgdbm -lgdbm_compat +@end example + +@cindex @samp{dir} file +@cindex @samp{pag} file +Databases created and manipulated by the compatibility interfaces +consist of two different files: @file{@var{file}.dir} and +@file{@var{file}.pag}. This is required by the @acronym{POSIX} +specification and corresponds to the traditional usage. Note, +however, that despite the similarity of the naming convention, +actual data stored in these files has not the same format as +in the databases created by other @code{dbm} or @code{ndbm} +libraries. In other words, you cannot access a standard UNIX +@code{dbm} file with GNU @code{dbm}! + +GNU @code{dbm} files are not @code{sparse}. You can copy them with +the usual @code{cp} command and they will not expand in the copying +process. + +@menu +* ndbm:: NDBM interface functions. +* dbm:: DBM interface functions. +@end menu + +@node ndbm +@section NDBM interface functions. +@cindex NDBM functions + +The functions below implement the @acronym{POSIX} @samp{ndbm} interface: + +@deftypefn {ndbm} {DBM *} dbm_open (char *@var{file}, int @var{flags}, int @var{mode}) +Opens a database. The @var{file} argument is the full name of the +database file to be opened. The function opens two files: +@file{@var{file}.pag} and @file{@var{file}.dir}. The @var{flags} and +@var{mode} arguments have the same meaning as the second and third +arguments of +@ifhtml +@uref{http://www.manpagez.com/man/2/open,,open(2)}, +@end ifhtml +@ifnothtml +@code{open} (@pxref{open,,open a file,open(2), open(2) man page}), +@end ifnothtml +except that a database opened for write-only access opens the files +for read and write access and the behavior of the @code{O_APPEND} flag is +unspecified. + +The function returns a pointer to the @code{DBM} structure describing +the database. This pointer is used to refer to this database in all +operations described below. + +Any error detected will cause a return value of @samp{NULL} and an +appropriate value will be stored in @code{gdbm_errno} +(@pxref{Variables}). +@end deftypefn + +@deftypefn {ndbm} void dbm_close (DBM *@var{dbf}) +Closes the database. The @var{dbf} argument must be a pointer +returned by an earlier call to @code{dbm_open}. +@end deftypefn + +@deftypefn {ndbm} datum dbm_fetch (DBM *@var{dbf}, datum @var{key}) +Reads a record from the database with the matching key. The @var{key} +argument supplies the key that is being looked for. + +If no matching record is found, the @code{dptr} member of the returned +datum is @samp{NULL}. Otherwise, the @code{dptr} member of the +returned datum points to the memory managed by the compatibility +library. The application should never free it. +@end deftypefn + +@deftypefn {ndbm} int dbm_store (DBM *@var{dbf}, datum @var{key}, @ + datum @var{content}, int @var{mode}) +Writes a key/value pair to the database. The argument @var{dbf} is a +pointer to the @code{DBM} structure returned from a call to +@code{dbm_open}. The @var{key} and @var{content} provide the values +for the record key and content. The @var{mode} argument controls +the behavior of @code{dbm_store} in case a matching record already +exists in the database. It can have one of the following two values: + +@table @code +@kwindex DBM_REPLACE +@item DBM_REPLACE +Replace existing record with the new one. + +@kwindex DBM_INSERT +@item DBM_INSERT +The existing record is left unchanged, and the function returns +@samp{1}. +@end table + +If no matching record exists in the database, new record will be +inserted no matter what the value of the @var{mode} is. +@end deftypefn + +@deftypefn {ndbm} int dbm_delete (DBM *@var{dbf}, datum @var{key}) +Deletes the record with the matching key from the database. If the +function succeeds, @samp{0} is returned. Otherwise, if no matching +record is found or if an error occurs, @samp{-1} is returned. +@end deftypefn + +@deftypefn {ndbm} datum dbm_firstkey (DBM *@var{dbf}) +Initializes iteration over the keys from the database and returns +the first key. Note, that the word @samp{first} does not imply any +specific ordering of the keys. + +If there are no records in the database, the @code{dptr} member of the +returned datum is @samp{NULL}. Otherwise, the @code{dptr} member of +the returned datum points to the memory managed by the compatibility +library. The application should never free it. +@end deftypefn + +@deftypefn {ndbm} datum dbm_nextkey (DBM *@var{dbf}) +Continues the iteration started by @code{dbm_firstkey}. Returns the +next key in the database. If the iteration covered all keys in the +database, the @code{dptr} member of the returned datum is @samp{NULL}. +Otherwise, the @code{dptr} member of the returned datum points to the +memory managed by the compatibility library. The application should +never free it. + +@cindex sequential access, using @samp{NDBM} +@cindex iteration loop, using @samp{NDBM} +The usual way of iterating over all the records in the database is: + +@example +for (key = dbm_firstkey (dbf); + key.ptr; + key = dbm_nextkey (dbf)) + @{ + /* do something with the key */ + @} +@end example + +The loop above should not try to delete any records from the database, +otherwise the iteration is not guaranteed to cover all the keys. +@xref{Sequential}, for a detailed discussion of this. +@end deftypefn + +@deftypefn {ndbm} int dbm_error (DBM *@var{dbf}) +Returns the error condition of the database: @samp{0} if no errors +occurred so far while manipulating the database, and a non-zero value +otherwise. +@end deftypefn + +@deftypefn {ndbm} void dbm_clearerr (DBM *@var{dbf}) +Clears the error condition of the database. +@end deftypefn + +@deftypefn {ndbm} int dbm_dirfno (DBM *@var{dbf}) +Returns the file descriptor of the @samp{dir} file of the database. +It is guaranteed to be different from the descriptor returned by +the @code{dbm_pagfno} function (see below). + +The application can lock this descriptor to serialize accesses to the +database. +@end deftypefn + +@deftypefn {ndbm} int dbm_pagfno (DBM *@var{dbf}) +Returns the file descriptor of the @samp{pag} file of the database. +See also @code{dbm_dirfno}. +@end deftypefn + +@deftypefn {ndbm} int dbm_rdonly (DBM *@var{dbf}) +Returns @samp{1} if the database @var{dbf} is open in a read-only mode +and @samp{0} otherwise. +@end deftypefn + +@node dbm +@section DBM interface functions. +@cindex DBM functions + +The functions below are provided for compatibility with the old +UNIX @samp{DBM} interface. Only one database at a time can be +manipulated using them. + +@deftypefn {dbm} int dbminit (char *@var{file}) +Opens a database. The @var{file} argument is the full name of the +database file to be opened. The function opens two files: +@file{@var{file}.pag} and @file{@var{file}.dir}. If any of +them does not exist, the function fails. It never attempts to create +the files. + +The database is opened in the read-write mode, if its disk permissions +permit. + +The application must ensure that the functions described below in +this section are called only after a successful call to @code{dbminit}. +@end deftypefn + +@deftypefn {dbm} int dbmclose (void) +Closes the database opened by an earlier call to @code{dbminit}. +@end deftypefn + +@deftypefn {dbm} datum fetch (datum @var{key}) +Reads a record from the database with the matching key. The @var{key} +argument supplies the key that is being looked for. + +If no matching record is found, the @code{dptr} member of the returned +datum is @samp{NULL}. Otherwise, the @code{dptr} member of the +returned datum points to the memory managed by the compatibility +library. The application should never free it. +@end deftypefn + +@deftypefn {dbm} int store (datum @var{key}, datum @var{content}) +Stores the key/value pair in the database. If a record with the +matching key already exists, its content will be replaced with the new +one. + +Returns @samp{0} on success and @samp{-1} on error. +@end deftypefn + +@deftypefn {dbm} int delete (datum @var{key}) +Deletes a record with the matching key. + +If the function succeeds, @samp{0} is returned. Otherwise, if no +matching record is found or if an error occurs, @samp{-1} is +returned. +@end deftypefn + +@deftypefn {dbm} datum firstkey (void) +Initializes iteration over the keys from the database and returns +the first key. Note, that the word @samp{first} does not imply any +specific ordering of the keys. + +If there are no records in the database, the @code{dptr} member of the +returned datum is @samp{NULL}. Otherwise, the @code{dptr} member of +the returned datum points to the memory managed by the compatibility +library. The application should never free it. +@end deftypefn + +@deftypefn {dbm} datum nextkey (datum @var{key}) +Continues the iteration started by a call to @code{firstkey}. Returns +the next key in the database. If the iteration covered all keys in the +database, the @code{dptr} member of the returned datum is @samp{NULL}. +Otherwise, the @code{dptr} member of the returned datum points to the +memory managed by the compatibility library. The application should +never free it. +@end deftypefn + +@node Bugs +@chapter Problems and bugs. + +If you have problems with GNU @code{dbm} or think you've found a bug, +please report it. Before reporting a bug, make sure you've actually +found a real bug. Carefully reread the documentation and see if it +really says you can do what you're trying to do. If it's not clear +whether you should be able to do something or not, report that too; it's +a bug in the documentation! + +Before reporting a bug or trying to fix it yourself, try to isolate it +to the smallest possible input file that reproduces the problem. Then +send us the input file and the exact results @code{gdbm} gave you. Also +say what you expected to occur; this will help us decide whether the +problem was really in the documentation. + +Once you've got a precise problem, send e-mail to +@email{bug-gdbm@@gnu.org}. + +Please include the version number of GNU @code{dbm} you are using. You can get +this information by printing the variable @code{gdbm_version} +(@pxref{Variables}). + +Non-bug suggestions are always welcome as well. If you have questions +about things that are unclear in the documentation or are just obscure +features, please report them too. + +You may contact the authors and maintainers by e-mail: +@example +@email{phil@@cs.wwu.edu}, @email{downsj@@downsj.com}, @email{gray@@gnu.org.ua} +@end example + +@node Resources +@chapter Additional resources + +For the latest updates and pointers to additional resources, visit +@uref{http://www.gnu.org/software/gdbm}. + +In particular, a copy of @code{gdbm} documentation in various formats +is available online at @uref{http://www.gnu.org/software/gdbm/manual}. + +Latest versions of @code{gdbm} can be downloaded from anonymous FTP: +@uref{ftp://ftp.gnu.org/gnu/gdbm}, or via HTTP from +@uref{http://ftp.gnu.org/gnu/gdbm}, or from any +@ifhtml +@uref{http://www.gnu.org/order/ftp.html,,GNU mirror} worldwide. +@end ifhtml +@ifnothtml +GNU mirror worldwide. See @uref{http://www.gnu.org/order/ftp.html}, +for a list of mirrors. +@end ifnothtml + +To track @code{gdbm} development, visit +@uref{http://puszcza.gnu.org.ua/projects/gdbm}. + +@node GNU Free Documentation License +@appendix GNU Free Documentation License + +@include fdl.texi + +@node Index +@unnumbered Index + +@printindex cp + +@bye diff --git a/doc/stamp-vti b/doc/stamp-vti new file mode 100644 index 0000000..04fc28f --- /dev/null +++ b/doc/stamp-vti @@ -0,0 +1,4 @@ +@set UPDATED 13 November 2011 +@set UPDATED-MONTH November 2011 +@set EDITION 1.10 +@set VERSION 1.10 diff --git a/doc/version.texi b/doc/version.texi new file mode 100644 index 0000000..04fc28f --- /dev/null +++ b/doc/version.texi @@ -0,0 +1,4 @@ +@set UPDATED 13 November 2011 +@set UPDATED-MONTH November 2011 +@set EDITION 1.10 +@set VERSION 1.10 diff --git a/export/Makefile.am b/export/Makefile.am new file mode 100644 index 0000000..63ce8ee --- /dev/null +++ b/export/Makefile.am @@ -0,0 +1,21 @@ +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AM_CPPFLAGS = -I$(GDBM183_INCLUDEDIR) -I$(srcdir)/../src + +bin_PROGRAMS = gdbmexport +gdbmexport_SOURCES = export.c +gdbmexport_LDADD = -L$(GDBM183_LIBDIR) $(GDBM183_LIBRARY) diff --git a/export/Makefile.in b/export/Makefile.in new file mode 100644 index 0000000..37de02d --- /dev/null +++ b/export/Makefile.in @@ -0,0 +1,586 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +bin_PROGRAMS = gdbmexport$(EXEEXT) +subdir = export +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/autoconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" +PROGRAMS = $(bin_PROGRAMS) +am_gdbmexport_OBJECTS = export.$(OBJEXT) +gdbmexport_OBJECTS = $(am_gdbmexport_OBJECTS) +am__DEPENDENCIES_1 = +gdbmexport_DEPENDENCIES = $(am__DEPENDENCIES_1) +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(gdbmexport_SOURCES) +DIST_SOURCES = $(gdbmexport_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOM4TE = @AUTOM4TE@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GDBM183_INCLUDEDIR = @GDBM183_INCLUDEDIR@ +GDBM183_LIBDIR = @GDBM183_LIBDIR@ +GDBM183_LIBRARY = @GDBM183_LIBRARY@ +GDBM_VERSION_MAJOR = @GDBM_VERSION_MAJOR@ +GDBM_VERSION_MINOR = @GDBM_VERSION_MINOR@ +GDBM_VERSION_PATCH = @GDBM_VERSION_PATCH@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +AM_CPPFLAGS = -I$(GDBM183_INCLUDEDIR) -I$(srcdir)/../src +gdbmexport_SOURCES = export.c +gdbmexport_LDADD = -L$(GDBM183_LIBDIR) $(GDBM183_LIBRARY) +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits export/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnits export/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +installcheck-binPROGRAMS: $(bin_PROGRAMS) + bad=0; pid=$$$$; list="$(bin_PROGRAMS)"; for p in $$list; do \ + case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \ + *" $$p "* | *" $(srcdir)/$$p "*) continue;; \ + esac; \ + f=`echo "$$p" | \ + sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + for opt in --help --version; do \ + if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \ + 2>c$${pid}_.err &2; bad=1; fi; \ + done; \ + done; rm -f c$${pid}_.???; exit $$bad +gdbmexport$(EXEEXT): $(gdbmexport_OBJECTS) $(gdbmexport_DEPENDENCIES) + @rm -f gdbmexport$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(gdbmexport_OBJECTS) $(gdbmexport_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/export.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) +installdirs: + for dir in "$(DESTDIR)$(bindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: installcheck-binPROGRAMS + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic clean-libtool ctags distclean distclean-compile \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-binPROGRAMS install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am \ + installcheck-binPROGRAMS installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-binPROGRAMS + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/export/export.c b/export/export.c new file mode 100644 index 0000000..d2a56a1 --- /dev/null +++ b/export/export.c @@ -0,0 +1,102 @@ +/* export.c - Stand alone flat file exporter for older versions of GDBM. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 2007, Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "systems.h" + +#include + +/* Include flatfile.c to pull in gdbm_export() */ +#define _GDBMEXPORT_ +#include "flatfile.c" + +void +usage (char *s) +{ + printf ("Usage: %s database outfile\n", s); + printf (" or: %s [-hv]\n", s); + printf ("Convert GDBM database into a flat dump format.\n"); + printf ("\n"); + printf ("Report bugs to <%s>.\n", PACKAGE_BUGREPORT); +} + + +void +version () +{ + printf ("gdbmexport (%s) %s\n", PACKAGE_NAME, PACKAGE_VERSION); + printf ("Copyright (C) 2007 Free Software Foundation, Inc.\n"); + printf ("License GPLv3+: GNU GPL version 3 or later \n"); + printf ("This is free software: you are free to change and redistribute it.\n"); + printf ("There is NO WARRANTY, to the extent permitted by law.\n"); +} + + +int +main(int argc, char *argv[]) +{ + int c; + GDBM_FILE dbf; + int flags = 0; + + while ((c = getopt (argc, argv, "hlv")) != -1) + switch (c) + { + case 'h': + usage (argv[0]); + exit (0); + + case 'l': + flags = GDBM_NOLOCK; + break; + + case 'v': + version (); + exit (0); + + default: + usage (argv[0]); + exit (1); + } + + if (argc != 3) + { + usage (argv[0]); + exit (1); + } + + dbf = gdbm_open (argv[1], 0, GDBM_READER | flags, 0600, NULL); + if (dbf == NULL) + { + fprintf (stderr, "%s: couldn't open database, %s\n", argv[0], + gdbm_strerror (gdbm_errno)); + exit (1); + } + + if (gdbm_export (dbf, argv[2], GDBM_WRCREAT | flags, 0600) == -1) + { + fprintf (stderr, "%s: export failed, %s\n", + argv[0], gdbm_strerror (gdbm_errno)); + gdbm_close (dbf); + exit (1); + } + gdbm_close (dbf); + exit (0); +} diff --git a/m4/gettext.m4 b/m4/gettext.m4 new file mode 100644 index 0000000..f84e6a5 --- /dev/null +++ b/m4/gettext.m4 @@ -0,0 +1,383 @@ +# gettext.m4 serial 63 (gettext-0.18) +dnl Copyright (C) 1995-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2006, 2008-2010. + +dnl Macro to add for using GNU gettext. + +dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). +dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The +dnl default (if it is not specified or empty) is 'no-libtool'. +dnl INTLSYMBOL should be 'external' for packages with no intl directory, +dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. +dnl If INTLSYMBOL is 'use-libtool', then a libtool library +dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, +dnl depending on --{enable,disable}-{shared,static} and on the presence of +dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library +dnl $(top_builddir)/intl/libintl.a will be created. +dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext +dnl implementations (in libc or libintl) without the ngettext() function +dnl will be ignored. If NEEDSYMBOL is specified and is +dnl 'need-formatstring-macros', then GNU gettext implementations that don't +dnl support the ISO C 99 formatstring macros will be ignored. +dnl INTLDIR is used to find the intl libraries. If empty, +dnl the value `$(top_builddir)/intl/' is used. +dnl +dnl The result of the configuration is one of three cases: +dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled +dnl and used. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 2) GNU gettext has been found in the system's C library. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 3) No internationalization, always use English msgid. +dnl Catalog format: none +dnl Catalog extension: none +dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. +dnl The use of .gmo is historical (it was needed to avoid overwriting the +dnl GNU format catalogs when building on a platform with an X/Open gettext), +dnl but we keep it in order not to force irrelevant filename changes on the +dnl maintainers. +dnl +AC_DEFUN([AM_GNU_GETTEXT], +[ + dnl Argument checking. + ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , + [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT +])])])])]) + ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old], + [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])]) + ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , + [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT +])])])]) + define([gt_included_intl], + ifelse([$1], [external], + ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]), + [yes])) + define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], [])) + gt_NEEDS_INIT + AM_GNU_GETTEXT_NEED([$2]) + + AC_REQUIRE([AM_PO_SUBDIRS])dnl + ifelse(gt_included_intl, yes, [ + AC_REQUIRE([AM_INTL_SUBDIR])dnl + ]) + + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Sometimes libintl requires libiconv, so first search for libiconv. + dnl Ideally we would do this search only after the + dnl if test "$USE_NLS" = "yes"; then + dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then + dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT + dnl the configure script would need to contain the same shell code + dnl again, outside any 'if'. There are two solutions: + dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. + dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. + dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not + dnl documented, we avoid it. + ifelse(gt_included_intl, yes, , [ + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + ]) + + dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation. + gt_INTL_MACOSX + + dnl Set USE_NLS. + AC_REQUIRE([AM_NLS]) + + ifelse(gt_included_intl, yes, [ + BUILD_INCLUDED_LIBINTL=no + USE_INCLUDED_LIBINTL=no + ]) + LIBINTL= + LTLIBINTL= + POSUB= + + dnl Add a version number to the cache macros. + case " $gt_needs " in + *" need-formatstring-macros "*) gt_api_version=3 ;; + *" need-ngettext "*) gt_api_version=2 ;; + *) gt_api_version=1 ;; + esac + gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" + gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" + + dnl If we use NLS figure out what method + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + ifelse(gt_included_intl, yes, [ + AC_MSG_CHECKING([whether included gettext is requested]) + AC_ARG_WITH([included-gettext], + [ --with-included-gettext use the GNU gettext library included here], + nls_cv_force_use_gnu_gettext=$withval, + nls_cv_force_use_gnu_gettext=no) + AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext]) + + nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" + if test "$nls_cv_force_use_gnu_gettext" != "yes"; then + ]) + dnl User does not insist on using GNU NLS library. Figure out what + dnl to use. If GNU gettext is available we use this. Else we have + dnl to fall back to GNU NLS library. + + if test $gt_api_version -ge 3; then + gt_revision_test_code=' +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +' + else + gt_revision_test_code= + fi + if test $gt_api_version -ge 2; then + gt_expression_test_code=' + * ngettext ("", "", 0)' + else + gt_expression_test_code= + fi + + AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], + [AC_TRY_LINK([#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings;], + [bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings], + [eval "$gt_func_gnugettext_libc=yes"], + [eval "$gt_func_gnugettext_libc=no"])]) + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then + dnl Sometimes libintl requires libiconv, so first search for libiconv. + ifelse(gt_included_intl, yes, , [ + AM_ICONV_LINK + ]) + dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL + dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) + dnl because that would add "-liconv" to LIBINTL and LTLIBINTL + dnl even if libiconv doesn't exist. + AC_LIB_LINKFLAGS_BODY([intl]) + AC_CACHE_CHECK([for GNU gettext in libintl], + [$gt_func_gnugettext_libintl], + [gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + dnl Now see whether libintl exists and does not depend on libiconv. + AC_TRY_LINK([#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *);], + [bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], + [eval "$gt_func_gnugettext_libintl=yes"], + [eval "$gt_func_gnugettext_libintl=no"]) + dnl Now see whether libintl exists and depends on libiconv. + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then + LIBS="$LIBS $LIBICONV" + AC_TRY_LINK([#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *);], + [bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], + [LIBINTL="$LIBINTL $LIBICONV" + LTLIBINTL="$LTLIBINTL $LTLIBICONV" + eval "$gt_func_gnugettext_libintl=yes" + ]) + fi + CPPFLAGS="$gt_save_CPPFLAGS" + LIBS="$gt_save_LIBS"]) + fi + + dnl If an already present or preinstalled GNU gettext() is found, + dnl use it. But if this macro is used in GNU gettext, and GNU + dnl gettext is already preinstalled in libintl, we update this + dnl libintl. (Cf. the install rule in intl/Makefile.in.) + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ + || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools; }; then + gt_use_preinstalled_gnugettext=yes + else + dnl Reset the values set by searching for libintl. + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + ifelse(gt_included_intl, yes, [ + if test "$gt_use_preinstalled_gnugettext" != "yes"; then + dnl GNU gettext is not found in the C library. + dnl Fall back on included GNU gettext library. + nls_cv_use_gnu_gettext=yes + fi + fi + + if test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions used to generate GNU NLS library. + BUILD_INCLUDED_LIBINTL=yes + USE_INCLUDED_LIBINTL=yes + LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD" + LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD" + LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` + fi + + CATOBJEXT= + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions to use GNU gettext tools. + CATOBJEXT=.gmo + fi + ]) + + if test -n "$INTL_MACOSX_LIBS"; then + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Some extra flags are needed during linking. + LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" + LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" + fi + fi + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + AC_DEFINE([ENABLE_NLS], [1], + [Define to 1 if translation of program messages to the user's native language + is requested.]) + else + USE_NLS=no + fi + fi + + AC_MSG_CHECKING([whether to use NLS]) + AC_MSG_RESULT([$USE_NLS]) + if test "$USE_NLS" = "yes"; then + AC_MSG_CHECKING([where the gettext function comes from]) + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + AC_MSG_RESULT([$gt_source]) + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + AC_MSG_CHECKING([how to link with libintl]) + AC_MSG_RESULT([$LIBINTL]) + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) + fi + + dnl For backward compatibility. Some packages may be using this. + AC_DEFINE([HAVE_GETTEXT], [1], + [Define if the GNU gettext() function is already present or preinstalled.]) + AC_DEFINE([HAVE_DCGETTEXT], [1], + [Define if the GNU dcgettext() function is already present or preinstalled.]) + fi + + dnl We need to process the po/ directory. + POSUB=po + fi + + ifelse(gt_included_intl, yes, [ + dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL + dnl to 'yes' because some of the testsuite requires it. + if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then + BUILD_INCLUDED_LIBINTL=yes + fi + + dnl Make all variables we use known to autoconf. + AC_SUBST([BUILD_INCLUDED_LIBINTL]) + AC_SUBST([USE_INCLUDED_LIBINTL]) + AC_SUBST([CATOBJEXT]) + + dnl For backward compatibility. Some configure.ins may be using this. + nls_cv_header_intl= + nls_cv_header_libgt= + + dnl For backward compatibility. Some Makefiles may be using this. + DATADIRNAME=share + AC_SUBST([DATADIRNAME]) + + dnl For backward compatibility. Some Makefiles may be using this. + INSTOBJEXT=.mo + AC_SUBST([INSTOBJEXT]) + + dnl For backward compatibility. Some Makefiles may be using this. + GENCAT=gencat + AC_SUBST([GENCAT]) + + dnl For backward compatibility. Some Makefiles may be using this. + INTLOBJS= + if test "$USE_INCLUDED_LIBINTL" = yes; then + INTLOBJS="\$(GETTOBJS)" + fi + AC_SUBST([INTLOBJS]) + + dnl Enable libtool support if the surrounding package wishes it. + INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix + AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX]) + ]) + + dnl For backward compatibility. Some Makefiles may be using this. + INTLLIBS="$LIBINTL" + AC_SUBST([INTLLIBS]) + + dnl Make all documented variables known to autoconf. + AC_SUBST([LIBINTL]) + AC_SUBST([LTLIBINTL]) + AC_SUBST([POSUB]) +]) + + +dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. +m4_define([gt_NEEDS_INIT], +[ + m4_divert_text([DEFAULTS], [gt_needs=]) + m4_define([gt_NEEDS_INIT], []) +]) + + +dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) +AC_DEFUN([AM_GNU_GETTEXT_NEED], +[ + m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) +]) + + +dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) +AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) diff --git a/m4/iconv.m4 b/m4/iconv.m4 new file mode 100644 index 0000000..f46ff14 --- /dev/null +++ b/m4/iconv.m4 @@ -0,0 +1,199 @@ +# iconv.m4 serial 9 (gettext-0.18) +dnl Copyright (C) 2000-2002, 2007-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl From Bruno Haible. + +AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], +[ + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([iconv]) +]) + +AC_DEFUN([AM_ICONV_LINK], +[ + dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and + dnl those with the standalone portable GNU libiconv installed). + AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + + dnl Add $INCICONV to CPPFLAGS before performing the following checks, + dnl because if the user has installed libiconv and not disabled its use + dnl via --without-libiconv-prefix, he wants to use it. The first + dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. + am_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) + + AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [ + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + AC_TRY_LINK([#include +#include ], + [iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);], + [am_cv_func_iconv=yes]) + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + AC_TRY_LINK([#include +#include ], + [iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);], + [am_cv_lib_iconv=yes] + [am_cv_func_iconv=yes]) + LIBS="$am_save_LIBS" + fi + ]) + if test "$am_cv_func_iconv" = yes; then + AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [ + dnl This tests against bugs in AIX 5.1, HP-UX 11.11, Solaris 10. + am_save_LIBS="$LIBS" + if test $am_cv_lib_iconv = yes; then + LIBS="$LIBS $LIBICONV" + fi + AC_TRY_RUN([ +#include +#include +int main () +{ + /* Test against AIX 5.1 bug: Failures are not distinguishable from successful + returns. */ + { + iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); + if (cd_utf8_to_88591 != (iconv_t)(-1)) + { + static const char input[] = "\342\202\254"; /* EURO SIGN */ + char buf[10]; + const char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_utf8_to_88591, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + return 1; + } + } + /* Test against Solaris 10 bug: Failures are not distinguishable from + successful returns. */ + { + iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); + if (cd_ascii_to_88591 != (iconv_t)(-1)) + { + static const char input[] = "\263"; + char buf[10]; + const char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_ascii_to_88591, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + return 1; + } + } +#if 0 /* This bug could be worked around by the caller. */ + /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; + char buf[50]; + const char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_88591_to_utf8, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if ((int)res > 0) + return 1; + } + } +#endif + /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is + provided. */ + if (/* Try standardized names. */ + iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) + /* Try IRIX, OSF/1 names. */ + && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) + /* Try AIX names. */ + && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) + /* Try HP-UX names. */ + && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) + return 1; + return 0; +}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no], + [case "$host_os" in + aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; + *) am_cv_func_iconv_works="guessing yes" ;; + esac]) + LIBS="$am_save_LIBS" + ]) + case "$am_cv_func_iconv_works" in + *no) am_func_iconv=no am_cv_lib_iconv=no ;; + *) am_func_iconv=yes ;; + esac + else + am_func_iconv=no am_cv_lib_iconv=no + fi + if test "$am_func_iconv" = yes; then + AC_DEFINE([HAVE_ICONV], [1], + [Define if you have the iconv() function and it works.]) + fi + if test "$am_cv_lib_iconv" = yes; then + AC_MSG_CHECKING([how to link with libiconv]) + AC_MSG_RESULT([$LIBICONV]) + else + dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV + dnl either. + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + AC_SUBST([LIBICONV]) + AC_SUBST([LTLIBICONV]) +]) + +AC_DEFUN([AM_ICONV], +[ + AM_ICONV_LINK + if test "$am_cv_func_iconv" = yes; then + AC_MSG_CHECKING([for iconv declaration]) + AC_CACHE_VAL([am_cv_proto_iconv], [ + AC_TRY_COMPILE([ +#include +#include +extern +#ifdef __cplusplus +"C" +#endif +#if defined(__STDC__) || defined(__cplusplus) +size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); +#else +size_t iconv(); +#endif +], [], [am_cv_proto_iconv_arg1=""], [am_cv_proto_iconv_arg1="const"]) + am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) + am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` + AC_MSG_RESULT([ + $am_cv_proto_iconv]) + AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1], + [Define as const if the declaration of iconv() needs const.]) + fi +]) diff --git a/m4/intlmacosx.m4 b/m4/intlmacosx.m4 new file mode 100644 index 0000000..dd91025 --- /dev/null +++ b/m4/intlmacosx.m4 @@ -0,0 +1,51 @@ +# intlmacosx.m4 serial 3 (gettext-0.18) +dnl Copyright (C) 2004-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Checks for special options needed on MacOS X. +dnl Defines INTL_MACOSX_LIBS. +AC_DEFUN([gt_INTL_MACOSX], +[ + dnl Check for API introduced in MacOS X 10.2. + AC_CACHE_CHECK([for CFPreferencesCopyAppValue], + [gt_cv_func_CFPreferencesCopyAppValue], + [gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + AC_TRY_LINK([#include ], + [CFPreferencesCopyAppValue(NULL, NULL)], + [gt_cv_func_CFPreferencesCopyAppValue=yes], + [gt_cv_func_CFPreferencesCopyAppValue=no]) + LIBS="$gt_save_LIBS"]) + if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then + AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1], + [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) + fi + dnl Check for API introduced in MacOS X 10.3. + AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent], + [gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + AC_TRY_LINK([#include ], [CFLocaleCopyCurrent();], + [gt_cv_func_CFLocaleCopyCurrent=yes], + [gt_cv_func_CFLocaleCopyCurrent=no]) + LIBS="$gt_save_LIBS"]) + if test $gt_cv_func_CFLocaleCopyCurrent = yes; then + AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1], + [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) + fi + INTL_MACOSX_LIBS= + if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then + INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" + fi + AC_SUBST([INTL_MACOSX_LIBS]) +]) diff --git a/m4/lib-ld.m4 b/m4/lib-ld.m4 new file mode 100644 index 0000000..ebb3052 --- /dev/null +++ b/m4/lib-ld.m4 @@ -0,0 +1,110 @@ +# lib-ld.m4 serial 4 (gettext-0.18) +dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl Subroutines of libtool.m4, +dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision +dnl with libtool.m4. + +dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. +AC_DEFUN([AC_LIB_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +case `$LD -v 2>&1 conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]* | [A-Za-z]:[\\/]*)] + [re_direlt='/[^/][^/]*/\.\./'] + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL([acl_cv_path_LD], +[if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in + *GNU* | *'with BFD'*) + test "$with_gnu_ld" != no && break ;; + *) + test "$with_gnu_ld" != yes && break ;; + esac + fi + done + IFS="$ac_save_ifs" +else + acl_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$acl_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT([$LD]) +else + AC_MSG_RESULT([no]) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_LIB_PROG_LD_GNU +]) diff --git a/m4/lib-link.m4 b/m4/lib-link.m4 new file mode 100644 index 0000000..c73bd8e --- /dev/null +++ b/m4/lib-link.m4 @@ -0,0 +1,774 @@ +# lib-link.m4 serial 21 (gettext-0.18) +dnl Copyright (C) 2001-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl From Bruno Haible. + +AC_PREREQ([2.54]) + +dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and +dnl augments the CPPFLAGS variable. +dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname +dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. +AC_DEFUN([AC_LIB_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + pushdef([Name],[translit([$1],[./-], [___])]) + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + ac_cv_lib[]Name[]_libs="$LIB[]NAME" + ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" + ac_cv_lib[]Name[]_cppflags="$INC[]NAME" + ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" + ]) + LIB[]NAME="$ac_cv_lib[]Name[]_libs" + LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" + INC[]NAME="$ac_cv_lib[]Name[]_cppflags" + LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + AC_SUBST([LIB]NAME[_PREFIX]) + dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the + dnl results of this search when this library appears as a dependency. + HAVE_LIB[]NAME=yes + popdef([NAME]) + popdef([Name]) +]) + +dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message]) +dnl searches for libname and the libraries corresponding to explicit and +dnl implicit dependencies, together with the specified include files and +dnl the ability to compile and link the specified testcode. The missing-message +dnl defaults to 'no' and may contain additional hints for the user. +dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} +dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and +dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs +dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. +dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname +dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. +AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + pushdef([Name],[translit([$1],[./-], [___])]) + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + + dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + + dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, + dnl because if the user has installed lib[]Name and not disabled its use + dnl via --without-lib[]Name-prefix, he wants to use it. + ac_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + + AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ + ac_save_LIBS="$LIBS" + dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS, + dnl because these -l options might require -L options that are present in + dnl LIBS. -l options benefit only from the -L options listed before it. + dnl Otherwise, add it to the front of LIBS, because it may be a static + dnl library that depends on another static library that is present in LIBS. + dnl Static libraries benefit only from the static libraries listed after + dnl it. + case " $LIB[]NAME" in + *" -l"*) LIBS="$LIBS $LIB[]NAME" ;; + *) LIBS="$LIB[]NAME $LIBS" ;; + esac + AC_TRY_LINK([$3], [$4], + [ac_cv_lib[]Name=yes], + [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])']) + LIBS="$ac_save_LIBS" + ]) + if test "$ac_cv_lib[]Name" = yes; then + HAVE_LIB[]NAME=yes + AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.]) + AC_MSG_CHECKING([how to link with lib[]$1]) + AC_MSG_RESULT([$LIB[]NAME]) + else + HAVE_LIB[]NAME=no + dnl If $LIB[]NAME didn't lead to a usable library, we don't need + dnl $INC[]NAME either. + CPPFLAGS="$ac_save_CPPFLAGS" + LIB[]NAME= + LTLIB[]NAME= + LIB[]NAME[]_PREFIX= + fi + AC_SUBST([HAVE_LIB]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + AC_SUBST([LIB]NAME[_PREFIX]) + popdef([NAME]) + popdef([Name]) +]) + +dnl Determine the platform dependent parameters needed to use rpath: +dnl acl_libext, +dnl acl_shlibext, +dnl acl_hardcode_libdir_flag_spec, +dnl acl_hardcode_libdir_separator, +dnl acl_hardcode_direct, +dnl acl_hardcode_minus_L. +AC_DEFUN([AC_LIB_RPATH], +[ + dnl Tell automake >= 1.10 to complain if config.rpath is missing. + m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) + AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS + AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld + AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host + AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir + AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + ]) + wl="$acl_cv_wl" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" + dnl Determine whether the user wants rpath handling at all. + AC_ARG_ENABLE([rpath], + [ --disable-rpath do not hardcode runtime library paths], + :, enable_rpath=yes) +]) + +dnl AC_LIB_FROMPACKAGE(name, package) +dnl declares that libname comes from the given package. The configure file +dnl will then not have a --with-libname-prefix option but a +dnl --with-package-prefix option. Several libraries can come from the same +dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar +dnl macro call that searches for libname. +AC_DEFUN([AC_LIB_FROMPACKAGE], +[ + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + define([acl_frompackage_]NAME, [$2]) + popdef([NAME]) + pushdef([PACK],[$2]) + pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + define([acl_libsinpackage_]PACKUP, + m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1]) + popdef([PACKUP]) + popdef([PACK]) +]) + +dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. +dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found +dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. +AC_DEFUN([AC_LIB_LINKFLAGS_BODY], +[ + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) + pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) + dnl Autoconf >= 2.61 supports dots in --with options. + pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_ARG_WITH(P_A_C_K[-prefix], +[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib + --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi +]) + dnl Search the library and its dependencies in $additional_libdir and + dnl $LDFLAGS. Using breadth-first-seach. + LIB[]NAME= + LTLIB[]NAME= + INC[]NAME= + LIB[]NAME[]_PREFIX= + dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been + dnl computed. So it has to be reset here. + HAVE_LIB[]NAME= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='$1 $2' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + dnl See if it was already located by an earlier AC_LIB_LINKFLAGS + dnl or AC_LIB_HAVE_LINKFLAGS call. + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" + else + dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined + dnl that this library doesn't exist. So just drop it. + : + fi + else + dnl Search the library lib$name in $additional_libdir and $LDFLAGS + dnl and the already constructed $LIBNAME/$LTLIBNAME. + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + dnl The same code as in the loop below: + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + dnl Found the library. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + dnl Linking with a shared library. We attempt to hardcode its + dnl directory into the executable's runpath, unless it's the + dnl standard /usr/lib. + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + dnl No hardcoding is needed. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + dnl The hardcoding into $LIBNAME is system dependent. + if test "$acl_hardcode_direct" = yes; then + dnl Using DIR/libNAME.so during linking hardcodes DIR into the + dnl resulting binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + dnl Rely on "-L$found_dir". + dnl But don't add it if it's already contained in the LDFLAGS + dnl or the already constructed $LIBNAME + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH + dnl here, because this doesn't fit in flags passed to the + dnl compiler. So give up. No hardcoding. This affects only + dnl very old systems. + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + dnl Linking with a static library. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" + else + dnl We shouldn't come here, but anyway it's good to have a + dnl fallback. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" + fi + fi + dnl Assume the include files are nearby. + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = '$1'; then + LIB[]NAME[]_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = '$1'; then + LIB[]NAME[]_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + dnl Potentially add $additional_includedir to $INCNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's /usr/local/include and we are using GCC on Linux, + dnl 3. if it's already present in $CPPFLAGS or the already + dnl constructed $INCNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INC[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $INCNAME. + INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + dnl Look for dependencies. + if test -n "$found_la"; then + dnl Read the .la file. It defines the variables + dnl dlname, library_names, old_library, dependency_libs, current, + dnl age, revision, installed, dlopen, dlpreopen, libdir. + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + dnl We use only dependency_libs. + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's /usr/local/lib and we are using GCC on Linux, + dnl 3. if it's already present in $LDFLAGS or the already + dnl constructed $LIBNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LIBNAME. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LTLIBNAME. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + dnl Handle this in the next round. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + dnl Handle this in the next round. Throw away the .la's + dnl directory; it is already contained in a preceding -L + dnl option. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + dnl Most likely an immediate library name. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" + ;; + esac + done + fi + else + dnl Didn't find the library; assume it is in the system directories + dnl known to the linker and runtime loader. (All the system + dnl directories known to the linker should also be known to the + dnl runtime loader, otherwise the system is severely misconfigured.) + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user must + dnl pass all path elements in one option. We can arrange that for a + dnl single library, but not when more than one $LIBNAMEs are used. + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + else + dnl The -rpath options are cumulative. + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + dnl When using libtool, the option that works for both libraries and + dnl executables is -R. The -R options are cumulative. + for found_dir in $ltrpathdirs; do + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" + done + fi + popdef([P_A_C_K]) + popdef([PACKLIBS]) + popdef([PACKUP]) + popdef([PACK]) + popdef([NAME]) +]) + +dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, +dnl unless already present in VAR. +dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes +dnl contains two or three consecutive elements that belong together. +AC_DEFUN([AC_LIB_APPENDTOVAR], +[ + for element in [$2]; do + haveit= + for x in $[$1]; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + [$1]="${[$1]}${[$1]:+ }$element" + fi + done +]) + +dnl For those cases where a variable contains several -L and -l options +dnl referring to unknown libraries and directories, this macro determines the +dnl necessary additional linker options for the runtime path. +dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) +dnl sets LDADDVAR to linker options needed together with LIBSVALUE. +dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, +dnl otherwise linking without libtool is assumed. +AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], +[ + AC_REQUIRE([AC_LIB_RPATH]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + $1= + if test "$enable_rpath" != no; then + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode directories into the resulting + dnl binary. + rpathdirs= + next= + for opt in $2; do + if test -n "$next"; then + dir="$next" + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem" \ + && test "X$dir" != "X/usr/$acl_libdirstem2"; then + rpathdirs="$rpathdirs $dir" + fi + next= + else + case $opt in + -L) next=yes ;; + -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem" \ + && test "X$dir" != "X/usr/$acl_libdirstem2"; then + rpathdirs="$rpathdirs $dir" + fi + next= ;; + *) next= ;; + esac + fi + done + if test "X$rpathdirs" != "X"; then + if test -n ""$3""; then + dnl libtool is used for linking. Use -R options. + for dir in $rpathdirs; do + $1="${$1}${$1:+ }-R$dir" + done + else + dnl The linker is used for linking directly. + if test -n "$acl_hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user + dnl must pass all path elements in one option. + alldirs= + for dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="$flag" + else + dnl The -rpath options are cumulative. + for dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="${$1}${$1:+ }$flag" + done + fi + fi + fi + fi + fi + AC_SUBST([$1]) +]) diff --git a/m4/lib-prefix.m4 b/m4/lib-prefix.m4 new file mode 100644 index 0000000..1601cea --- /dev/null +++ b/m4/lib-prefix.m4 @@ -0,0 +1,224 @@ +# lib-prefix.m4 serial 7 (gettext-0.18) +dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl From Bruno Haible. + +dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and +dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't +dnl require excessive bracketing. +ifdef([AC_HELP_STRING], +[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], +[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) + +dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed +dnl to access previously installed libraries. The basic assumption is that +dnl a user will want packages to use other packages he previously installed +dnl with the same --prefix option. +dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate +dnl libraries, but is otherwise very convenient. +AC_DEFUN([AC_LIB_PREFIX], +[ + AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_CANONICAL_HOST]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib-prefix], +[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib + --without-lib-prefix don't search for libraries in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + fi + fi +]) + if test $use_additional = yes; then + dnl Potentially add $additional_includedir to $CPPFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's already present in $CPPFLAGS, + dnl 3. if it's /usr/local/include and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + for x in $CPPFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $CPPFLAGS. + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" + fi + fi + fi + fi + dnl Potentially add $additional_libdir to $LDFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's already present in $LDFLAGS, + dnl 3. if it's /usr/local/lib and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then + haveit= + for x in $LDFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LDFLAGS. + LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" + fi + fi + fi + fi + fi +]) + +dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, +dnl acl_final_exec_prefix, containing the values to which $prefix and +dnl $exec_prefix will expand at the end of the configure script. +AC_DEFUN([AC_LIB_PREPARE_PREFIX], +[ + dnl Unfortunately, prefix and exec_prefix get only finally determined + dnl at the end of configure. + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" +]) + +dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the +dnl variables prefix and exec_prefix bound to the values they will have +dnl at the end of the configure script. +AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], +[ + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + $1 + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" +]) + +dnl AC_LIB_PREPARE_MULTILIB creates +dnl - a variable acl_libdirstem, containing the basename of the libdir, either +dnl "lib" or "lib64" or "lib/64", +dnl - a variable acl_libdirstem2, as a secondary possible value for +dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or +dnl "lib/amd64". +AC_DEFUN([AC_LIB_PREPARE_MULTILIB], +[ + dnl There is no formal standard regarding lib and lib64. + dnl On glibc systems, the current practice is that on a system supporting + dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under + dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine + dnl the compiler's default mode by looking at the compiler's library search + dnl path. If at least one of its elements ends in /lib64 or points to a + dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. + dnl Otherwise we use the default, namely "lib". + dnl On Solaris systems, the current practice is that on a system supporting + dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under + dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or + dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. + AC_REQUIRE([AC_CANONICAL_HOST]) + acl_libdirstem=lib + acl_libdirstem2= + case "$host_os" in + solaris*) + dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment + dnl . + dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." + dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the + dnl symlink is missing, so we set acl_libdirstem2 too. + AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], + [AC_EGREP_CPP([sixtyfour bits], [ +#ifdef _LP64 +sixtyfour bits +#endif + ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no]) + ]) + if test $gl_cv_solaris_64bit = yes; then + acl_libdirstem=lib/64 + case "$host_cpu" in + sparc*) acl_libdirstem2=lib/sparcv9 ;; + i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; + esac + fi + ;; + *) + searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` + if test -n "$searchpath"; then + acl_save_IFS="${IFS= }"; IFS=":" + for searchdir in $searchpath; do + if test -d "$searchdir"; then + case "$searchdir" in + */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; + */../ | */.. ) + # Better ignore directories of this form. They are misleading. + ;; + *) searchdir=`cd "$searchdir" && pwd` + case "$searchdir" in + */lib64 ) acl_libdirstem=lib64 ;; + esac ;; + esac + fi + done + IFS="$acl_save_IFS" + fi + ;; + esac + test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" +]) diff --git a/m4/libtool.m4 b/m4/libtool.m4 new file mode 100644 index 0000000..02f5b5d --- /dev/null +++ b/m4/libtool.m4 @@ -0,0 +1,7392 @@ +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) + +# serial 56 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN + + +## ------------------------------------- ## +## Accumulate code for creating libtool. ## +## ------------------------------------- ## + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + +## ------------------------ ## +## FIXME: Eliminate VARNAME ## +## ------------------------ ## + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2009 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_XSI_SHELLFNS + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES +# -------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX +# ----------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`print -r -- -n 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[AC_CHECK_TOOL(AR, ar, false) +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1]) + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line __oline__ "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +void fnord () __attribute__((visibility("default"))); +#endif + +void fnord () { int i=42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[[4-9]]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method == "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac +AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag= + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE(int foo(void) {}, + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + ) + LDFLAGS="$save_LDFLAGS" + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], + [[If ld is used when linking, flag to hardcode $libdir into a binary + during linking. This must work even if $libdir does not exist]]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [fix_srcfile_path], [1], + [Fix the shell variable $srcfile for the compiler]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd[[12]]*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 will use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +]) +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case $p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + else + prev= + fi + + if test "$pre_test_object_deps_done" = no; then + case $p in + -L* | -R*) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + ;; + + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + CC=${F77-"f77"} + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + CC=${FC-"f95"} + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC="$lt_save_CC" +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC="$lt_save_CC" +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_XSI_SHELLFNS +# --------------------- +# Bourne and XSI compatible variants of some useful shell functions. +m4_defun([_LT_PROG_XSI_SHELLFNS], +[case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $[*] )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} + +dnl func_dirname_and_basename +dnl A portable version of this function is already defined in general.m4sh +dnl so there is no need for it here. + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[[^=]]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[[^.]]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$[@]"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]+=\$[2]" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]=\$$[1]\$[2]" +} + +_LT_EOF + ;; + esac +]) diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4 new file mode 100644 index 0000000..b8e0e71 --- /dev/null +++ b/m4/ltoptions.m4 @@ -0,0 +1,368 @@ +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + +## --------------------------------- ## +## Macros to handle LT_INIT options. ## +## --------------------------------- ## + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [0], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +## ----------------- ## +## LTDL_INIT Options ## +## ----------------- ## + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) diff --git a/m4/ltsugar.m4 b/m4/ltsugar.m4 new file mode 100644 index 0000000..9000a05 --- /dev/null +++ b/m4/ltsugar.m4 @@ -0,0 +1,123 @@ +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) diff --git a/m4/ltversion.m4 b/m4/ltversion.m4 new file mode 100644 index 0000000..cb128aa --- /dev/null +++ b/m4/ltversion.m4 @@ -0,0 +1,23 @@ +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# Generated from ltversion.in. + +# serial 3121 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.2.7a]) +m4_define([LT_PACKAGE_REVISION], [1.3121]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.2.7a' +macro_revision='1.3121' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4 new file mode 100644 index 0000000..bf92b5e --- /dev/null +++ b/m4/lt~obsolete.m4 @@ -0,0 +1,98 @@ +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 4 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff --git a/m4/nls.m4 b/m4/nls.m4 new file mode 100644 index 0000000..003704c --- /dev/null +++ b/m4/nls.m4 @@ -0,0 +1,32 @@ +# nls.m4 serial 5 (gettext-0.18) +dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation, +dnl Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +AC_PREREQ([2.50]) + +AC_DEFUN([AM_NLS], +[ + AC_MSG_CHECKING([whether NLS is requested]) + dnl Default is enabled NLS + AC_ARG_ENABLE([nls], + [ --disable-nls do not use Native Language Support], + USE_NLS=$enableval, USE_NLS=yes) + AC_MSG_RESULT([$USE_NLS]) + AC_SUBST([USE_NLS]) +]) diff --git a/m4/po.m4 b/m4/po.m4 new file mode 100644 index 0000000..47f36a4 --- /dev/null +++ b/m4/po.m4 @@ -0,0 +1,449 @@ +# po.m4 serial 17 (gettext-0.18) +dnl Copyright (C) 1995-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +AC_PREREQ([2.50]) + +dnl Checks for all prerequisites of the po subdirectory. +AC_DEFUN([AM_PO_SUBDIRS], +[ + AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl + AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake + AC_REQUIRE([AM_NLS])dnl + + dnl Release version of the gettext macros. This is used to ensure that + dnl the gettext macros and po/Makefile.in.in are in sync. + AC_SUBST([GETTEXT_MACRO_VERSION], [0.18]) + + dnl Perform the following tests also if --disable-nls has been given, + dnl because they are needed for "make dist" to work. + + dnl Search for GNU msgfmt in the PATH. + dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. + dnl The second test excludes FreeBSD msgfmt. + AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, + [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT]) + + dnl Test whether it is GNU msgfmt >= 0.15. +changequote(,)dnl + case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; + *) MSGFMT_015=$MSGFMT ;; + esac +changequote([,])dnl + AC_SUBST([MSGFMT_015]) +changequote(,)dnl + case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; + *) GMSGFMT_015=$GMSGFMT ;; + esac +changequote([,])dnl + AC_SUBST([GMSGFMT_015]) + + dnl Search for GNU xgettext 0.12 or newer in the PATH. + dnl The first test excludes Solaris xgettext and early GNU xgettext versions. + dnl The second test excludes FreeBSD xgettext. + AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, + [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + dnl Remove leftover from FreeBSD xgettext call. + rm -f messages.po + + dnl Test whether it is GNU xgettext >= 0.15. +changequote(,)dnl + case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; + *) XGETTEXT_015=$XGETTEXT ;; + esac +changequote([,])dnl + AC_SUBST([XGETTEXT_015]) + + dnl Search for GNU msgmerge 0.11 or newer in the PATH. + AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, + [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) + + dnl Installation directories. + dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we + dnl have to define it here, so that it can be used in po/Makefile. + test -n "$localedir" || localedir='${datadir}/locale' + AC_SUBST([localedir]) + + dnl Support for AM_XGETTEXT_OPTION. + test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= + AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) + + AC_CONFIG_COMMANDS([po-directories], [[ + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + # Treat a directory as a PO directory if and only if it has a + # POTFILES.in file. This allows packages to have multiple PO + # directories under different names or in different locations. + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assigment from automake < 1.5. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + # Hide the ALL_LINGUAS assigment from automake < 1.5. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + # Compute POFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) + # Compute UPDATEPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) + # Compute DUMMYPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) + # Compute GMOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + UPDATEPOFILES= + DUMMYPOFILES= + GMOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done]], + [# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it + # from automake < 1.5. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" + ]) +]) + +dnl Postprocesses a Makefile in a directory containing PO files. +AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], +[ + # When this code is run, in config.status, two variables have already been + # set: + # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, + # - LINGUAS is the value of the environment variable LINGUAS at configure + # time. + +changequote(,)dnl + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + # Find a way to echo strings without interpreting backslash. + if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then + gt_echo='echo' + else + if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then + gt_echo='printf %s\n' + else + echo_func () { + cat < "$ac_file.tmp" + if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then + # Add dependencies that cannot be formulated as a simple suffix rule. + for lang in $ALL_LINGUAS; do + frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` + cat >> "$ac_file.tmp" < /dev/null; then + # Add dependencies that cannot be formulated as a simple suffix rule. + for lang in $ALL_LINGUAS; do + frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` + cat >> "$ac_file.tmp" <> "$ac_file.tmp" <, 1996. + +AC_PREREQ([2.50]) + +# Search path for a program which passes the given test. + +dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST], +[ +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL([ac_cv_path_$1], +[case "[$]$1" in + [[\\/]]* | ?:[[\\/]]*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in ifelse([$5], , $PATH, [$5]); do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then + AC_MSG_RESULT([$][$1]) +else + AC_MSG_RESULT([no]) +fi +AC_SUBST([$1])dnl +]) diff --git a/po/LINGUAS b/po/LINGUAS new file mode 100644 index 0000000..9d728fb --- /dev/null +++ b/po/LINGUAS @@ -0,0 +1,6 @@ +# This file is generated automatically; don't edit +de +fi +ja +pl +uk diff --git a/po/Makefile.in.in b/po/Makefile.in.in new file mode 100644 index 0000000..83d8838 --- /dev/null +++ b/po/Makefile.in.in @@ -0,0 +1,444 @@ +# Makefile for PO directory in any package using GNU gettext. +# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper +# +# This file can be copied and used freely without restrictions. It can +# be used in projects which are not available under the GNU General Public +# License but which still want to provide support for the GNU gettext +# functionality. +# Please note that the actual code of GNU gettext is covered by the GNU +# General Public License and is *not* in the public domain. +# +# Origin: gettext-0.18 +GETTEXT_MACRO_VERSION = 0.18 + +PACKAGE = @PACKAGE@ +VERSION = @VERSION@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + +SHELL = /bin/sh +@SET_MAKE@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ + +prefix = @prefix@ +exec_prefix = @exec_prefix@ +datarootdir = @datarootdir@ +datadir = @datadir@ +localedir = @localedir@ +gettextsrcdir = $(datadir)/gettext/po + +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ + +# We use $(mkdir_p). +# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as +# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, +# @install_sh@ does not start with $(SHELL), so we add it. +# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined +# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake +# versions, $(mkinstalldirs) and $(install_sh) are unused. +mkinstalldirs = $(SHELL) @install_sh@ -d +install_sh = $(SHELL) @install_sh@ +MKDIR_P = @MKDIR_P@ +mkdir_p = @mkdir_p@ + +GMSGFMT_ = @GMSGFMT@ +GMSGFMT_no = @GMSGFMT@ +GMSGFMT_yes = @GMSGFMT_015@ +GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) +MSGFMT_ = @MSGFMT@ +MSGFMT_no = @MSGFMT@ +MSGFMT_yes = @MSGFMT_015@ +MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) +XGETTEXT_ = @XGETTEXT@ +XGETTEXT_no = @XGETTEXT@ +XGETTEXT_yes = @XGETTEXT_015@ +XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) +MSGMERGE = msgmerge +MSGMERGE_UPDATE = @MSGMERGE@ --update +MSGINIT = msginit +MSGCONV = msgconv +MSGFILTER = msgfilter + +POFILES = @POFILES@ +GMOFILES = @GMOFILES@ +UPDATEPOFILES = @UPDATEPOFILES@ +DUMMYPOFILES = @DUMMYPOFILES@ +DISTFILES.common = Makefile.in.in remove-potcdate.sin \ +$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) +DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ +$(POFILES) $(GMOFILES) \ +$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) + +POTFILES = \ + +CATALOGS = @CATALOGS@ + +# Makevars gets inserted here. (Don't remove this line!) + +.SUFFIXES: +.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update + +.po.mo: + @echo "$(MSGFMT) -c -o $@ $<"; \ + $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ + +.po.gmo: + @lang=`echo $* | sed -e 's,.*/,,'`; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ + cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo + +.sin.sed: + sed -e '/^#/d' $< > t-$@ + mv t-$@ $@ + + +all: check-macro-version all-@USE_NLS@ + +all-yes: stamp-po +all-no: + +# Ensure that the gettext macros and this Makefile.in.in are in sync. +check-macro-version: + @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ + || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ + exit 1; \ + } + +# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no +# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because +# we don't want to bother translators with empty POT files). We assume that +# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. +# In this case, stamp-po is a nop (i.e. a phony target). + +# stamp-po is a timestamp denoting the last time at which the CATALOGS have +# been loosely updated. Its purpose is that when a developer or translator +# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, +# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent +# invocations of "make" will do nothing. This timestamp would not be necessary +# if updating the $(CATALOGS) would always touch them; however, the rule for +# $(POFILES) has been designed to not touch files that don't need to be +# changed. +stamp-po: $(srcdir)/$(DOMAIN).pot + test ! -f $(srcdir)/$(DOMAIN).pot || \ + test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) + @test ! -f $(srcdir)/$(DOMAIN).pot || { \ + echo "touch stamp-po" && \ + echo timestamp > stamp-poT && \ + mv stamp-poT stamp-po; \ + } + +# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', +# otherwise packages like GCC can not be built if only parts of the source +# have been downloaded. + +# This target rebuilds $(DOMAIN).pot; it is an expensive operation. +# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. +$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed + if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \ + package_gnu='GNU '; \ + else \ + package_gnu=''; \ + fi; \ + if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ + msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ + else \ + msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ + fi; \ + case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ + $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ + --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ + --files-from=$(srcdir)/POTFILES.in \ + --copyright-holder='$(COPYRIGHT_HOLDER)' \ + --msgid-bugs-address="$$msgid_bugs_address" \ + ;; \ + *) \ + $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ + --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ + --files-from=$(srcdir)/POTFILES.in \ + --copyright-holder='$(COPYRIGHT_HOLDER)' \ + --package-name="$${package_gnu}@PACKAGE@" \ + --package-version='@VERSION@' \ + --msgid-bugs-address="$$msgid_bugs_address" \ + ;; \ + esac + test ! -f $(DOMAIN).po || { \ + if test -f $(srcdir)/$(DOMAIN).pot; then \ + sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ + sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ + if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ + rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ + else \ + rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ + mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ + fi; \ + else \ + mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ + fi; \ + } + +# This rule has no dependencies: we don't need to update $(DOMAIN).pot at +# every "make" invocation, only create it when it is missing. +# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. +$(srcdir)/$(DOMAIN).pot: + $(MAKE) $(DOMAIN).pot-update + +# This target rebuilds a PO file if $(DOMAIN).pot has changed. +# Note that a PO file is not touched if it doesn't need to be changed. +$(POFILES): $(srcdir)/$(DOMAIN).pot + @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ + if test -f "$(srcdir)/$${lang}.po"; then \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ + cd $(srcdir) \ + && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ + $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ + *) \ + $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ + esac; \ + }; \ + else \ + $(MAKE) $${lang}.po-create; \ + fi + + +install: install-exec install-data +install-exec: +install-data: install-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ + for file in $(DISTFILES.common) Makevars.template; do \ + $(INSTALL_DATA) $(srcdir)/$$file \ + $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + for file in Makevars; do \ + rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + else \ + : ; \ + fi +install-data-no: all +install-data-yes: all + @catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + dir=$(localedir)/$$lang/LC_MESSAGES; \ + $(mkdir_p) $(DESTDIR)$$dir; \ + if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ + $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ + echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ + for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ + if test -n "$$lc"; then \ + if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ + link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ + mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ + for file in *; do \ + if test -f $$file; then \ + ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ + fi; \ + done); \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + else \ + if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ + :; \ + else \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + fi; \ + fi; \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ + ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ + cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ + fi; \ + done; \ + done + +install-strip: install + +installdirs: installdirs-exec installdirs-data +installdirs-exec: +installdirs-data: installdirs-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ + else \ + : ; \ + fi +installdirs-data-no: +installdirs-data-yes: + @catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + dir=$(localedir)/$$lang/LC_MESSAGES; \ + $(mkdir_p) $(DESTDIR)$$dir; \ + for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ + if test -n "$$lc"; then \ + if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ + link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ + mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ + for file in *; do \ + if test -f $$file; then \ + ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ + fi; \ + done); \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + else \ + if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ + :; \ + else \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + fi; \ + fi; \ + fi; \ + done; \ + done + +# Define this as empty until I found a useful application. +installcheck: + +uninstall: uninstall-exec uninstall-data +uninstall-exec: +uninstall-data: uninstall-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + for file in $(DISTFILES.common) Makevars.template; do \ + rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + else \ + : ; \ + fi +uninstall-data-no: +uninstall-data-yes: + catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + done; \ + done + +check: all + +info dvi ps pdf html tags TAGS ctags CTAGS ID: + +mostlyclean: + rm -f remove-potcdate.sed + rm -f stamp-poT + rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po + rm -fr *.o + +clean: mostlyclean + +distclean: clean + rm -f Makefile Makefile.in POTFILES *.mo + +maintainer-clean: distclean + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + rm -f stamp-po $(GMOFILES) + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +dist distdir: + $(MAKE) update-po + @$(MAKE) dist2 +# This is a separate target because 'update-po' must be executed before. +dist2: stamp-po $(DISTFILES) + dists="$(DISTFILES)"; \ + if test "$(PACKAGE)" = "gettext-tools"; then \ + dists="$$dists Makevars.template"; \ + fi; \ + if test -f $(srcdir)/$(DOMAIN).pot; then \ + dists="$$dists $(DOMAIN).pot stamp-po"; \ + fi; \ + if test -f $(srcdir)/ChangeLog; then \ + dists="$$dists ChangeLog"; \ + fi; \ + for i in 0 1 2 3 4 5 6 7 8 9; do \ + if test -f $(srcdir)/ChangeLog.$$i; then \ + dists="$$dists ChangeLog.$$i"; \ + fi; \ + done; \ + if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ + for file in $$dists; do \ + if test -f $$file; then \ + cp -p $$file $(distdir) || exit 1; \ + else \ + cp -p $(srcdir)/$$file $(distdir) || exit 1; \ + fi; \ + done + +update-po: Makefile + $(MAKE) $(DOMAIN).pot-update + test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) + $(MAKE) update-gmo + +# General rule for creating PO files. + +.nop.po-create: + @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ + echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ + exit 1 + +# General rule for updating PO files. + +.nop.po-update: + @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ + if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ + tmpdir=`pwd`; \ + echo "$$lang:"; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ + cd $(srcdir); \ + if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ + $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ + *) \ + $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ + esac; \ + }; then \ + if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ + rm -f $$tmpdir/$$lang.new.po; \ + else \ + if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ + :; \ + else \ + echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ + exit 1; \ + fi; \ + fi; \ + else \ + echo "msgmerge for $$lang.po failed!" 1>&2; \ + rm -f $$tmpdir/$$lang.new.po; \ + fi + +$(DUMMYPOFILES): + +update-gmo: Makefile $(GMOFILES) + @: + +# Recreate Makefile by invoking config.status. Explicitly invoke the shell, +# because execution permission bits may not work on the current file system. +# Use @SHELL@, which is the shell determined by autoconf for the use by its +# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. +Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ + cd $(top_builddir) \ + && @SHELL@ ./config.status $(subdir)/$@.in po-directories + +force: + +# Tell versions [3.59,3.63) of GNU make not to export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/po/Makevars b/po/Makevars new file mode 100644 index 0000000..4005c14 --- /dev/null +++ b/po/Makevars @@ -0,0 +1,60 @@ +# Gettext variables for GDBM +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . + +# Usually the message domain is the same as the package name. +DOMAIN = $(PACKAGE) + +# These two variables depend on the location of this directory. +subdir = po +top_builddir = .. + +# These options get passed to xgettext. +XGETTEXT_OPTIONS = \ + --keyword=_\ + --keyword=N_\ + --flag=_:1:pass-c-format\ + --flag=N_:1:pass-c-format\ + --flag=error:2:c-format + +# This is the copyright holder that gets inserted into the header of the +# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding +# package. (Note that the msgstr strings, extracted from the package's +# sources, belong to the copyright holder of the package.) Translators are +# expected to transfer the copyright for their translations to this person +# or entity, or to disclaim their copyright. The empty string stands for +# the public domain; in this case the translators are expected to disclaim +# their copyright. +COPYRIGHT_HOLDER = Free Software Foundation, Inc. + +# This is the email address or URL to which the translators shall report +# bugs in the untranslated strings: +# - Strings which are not entire sentences, see the maintainer guidelines +# in the GNU gettext documentation, section 'Preparing Strings'. +# - Strings which use unclear terms or require additional context to be +# understood. +# - Strings which make invalid assumptions about notation of date, time or +# money. +# - Pluralisation problems. +# - Incorrect English spelling. +# - Incorrect formatting. +# It can be your email address, or a mailing list address where translators +# can write to without being subscribed, or the URL of a web page through +# which the translators can contact you. +MSGID_BUGS_ADDRESS = bug-gdbm@gnu.org + +# This is the list of locale categories, beyond LC_MESSAGES, for which the +# message catalogs shall be used. It is usually empty. +EXTRA_LOCALE_CATEGORIES = diff --git a/po/POTFILES.in b/po/POTFILES.in new file mode 100644 index 0000000..e4145ff --- /dev/null +++ b/po/POTFILES.in @@ -0,0 +1,23 @@ +# List of GDBM source files which contain translatable strings. +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . + +src/gdbmerrno.c +src/bucket.c +src/falloc.c +src/findkey.c +src/gdbmseq.c +src/testgdbm.c +src/update.c \ No newline at end of file diff --git a/po/Rules-quot b/po/Rules-quot new file mode 100644 index 0000000..af52487 --- /dev/null +++ b/po/Rules-quot @@ -0,0 +1,47 @@ +# Special Makefile rules for English message catalogs with quotation marks. + +DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot + +.SUFFIXES: .insert-header .po-update-en + +en@quot.po-create: + $(MAKE) en@quot.po-update +en@boldquot.po-create: + $(MAKE) en@boldquot.po-update + +en@quot.po-update: en@quot.po-update-en +en@boldquot.po-update: en@boldquot.po-update-en + +.insert-header.po-update-en: + @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ + if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ + tmpdir=`pwd`; \ + echo "$$lang:"; \ + ll=`echo $$lang | sed -e 's/@.*//'`; \ + LC_ALL=C; export LC_ALL; \ + cd $(srcdir); \ + if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ + if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ + rm -f $$tmpdir/$$lang.new.po; \ + else \ + if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ + :; \ + else \ + echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ + exit 1; \ + fi; \ + fi; \ + else \ + echo "creation of $$lang.po failed!" 1>&2; \ + rm -f $$tmpdir/$$lang.new.po; \ + fi + +en@quot.insert-header: insert-header.sin + sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header + +en@boldquot.insert-header: insert-header.sin + sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header + +mostlyclean: mostlyclean-quot +mostlyclean-quot: + rm -f *.insert-header diff --git a/po/boldquot.sed b/po/boldquot.sed new file mode 100644 index 0000000..4b937aa --- /dev/null +++ b/po/boldquot.sed @@ -0,0 +1,10 @@ +s/"\([^"]*\)"/“\1”/g +s/`\([^`']*\)'/‘\1’/g +s/ '\([^`']*\)' / ‘\1’ /g +s/ '\([^`']*\)'$/ ‘\1’/g +s/^'\([^`']*\)' /‘\1’ /g +s/“”/""/g +s/“/“/g +s/”/”/g +s/‘/‘/g +s/’/’/g diff --git a/po/de.gmo b/po/de.gmo new file mode 100644 index 0000000000000000000000000000000000000000..bea14ad16146d58b26ba40f7b5a91664eddb531e GIT binary patch literal 9737 zcmaKxZH!#kS;tQjH!0K9G@+1|H0epwP1Z^7WY(psp?#!H- zx!ybXPVc?5>vcon1Bj{tg-Q^KeyG2=P&HHvP%PE4RLFvgXe*?Y4+W%31lpEA4e(?}P86{%fF&|D4A!c>D^;pSsM?FM!_yVWD~xl==S+ z)Zp8`{$VyH@~nbFHw(TSTmt1>Pk}P7>+uCp_VXeLYt?;{aXlC=KWVt=&$<#X9V8|-V2@th2INz#oEp!1p7BL*OD<13wQ=f!_wF z!JmR+9}l4~5e+tU{ zw{R%Y#|J>slLO#G;0aLn@vETFy$s6!Uj;=kzYU5UzXyt5z75KLZr0c=cn2uw+y~0| zQy?TN1%=-)fpXrjfHLnlL23UdQ0U(V#eaVQ=Km6S7!kU$h5j;V?GBWE zzXgijT*oCN``ZZ$pFaeOyiS0kFE4^01uug#{@+2-_jljp{Mt@X&U+gu?e}=x1@fmJ z;z#zs>@fx9TrYychcAP&-*1Al&%Xy{zW)HlzU1S;{2kF^b4g^ka_lG0F`T zc|-=IPv2Kspy zI{k!i5dGip-^HhhJs+X0`!<2+{JZ!DdFCmnDWb#joONJ*PEXz|y3x-vlN7ocWu{T2 z*@mXZ?|wbetX5QIW-W|j-AMb;&^FzqZ9a;PK5D|I$!fYn!)X&Y(yq}(s*8@%?Pk5J z3zHYRm!<72>{hj2+2|Slgl?so?wGh&m0|TbZLHdrDtUC?X!kl;OP1=`RkWqN7Lk_c z9{K5nc}K5>ai6((R?UWX6KmZJi*QhJwXm5ngnd_()q8Zf;(j?x{-L&aO<=e(+oo^(KPL?Jjey=^8U{!~$!erXOSiPP_g&V#$ zHr(;XYnfg%SstZ{9AjA~+^WqbnE)1#n#=5VY8W;oI!Rb zOm?DK({QY-le9n%xycGc(?qT&@|twUQ6kJvQIDiuHg>}p+w7XA?N;}@hf&(U0+ov0 zo;{tlQu}sPjBZ8FRI8{U(dcQE;0}6W5y?T()Q1B>;iYScPg?Pu=jlu-^df4kRgKS703X}T~xv|=BvSHn7 zaanJoJB6__VSvafGrc%$*zr=$i?Hw$djIUCtz?&Cgtk*AsHnMauh zZ-skg#O14nQY%|rC(U8CR8r<&3}b}p_i#KNzT|yefmLfe7}DeLDb$WHRF_VyEG!*g z)?tPoQnh>1VJwH{8Zd=g>KEd1yQa%Er%uw2i)mPaIe~0#%S@WJL-9;o+jDM7Y4W{j zIc~khEooI^TRYos7}MO^h4d^rll0OIb?LWr@qYUz@&lY?MQ%7oZDA!MFL>}!lD>l<|{SxwUQq!inr?i8i$?e~}*;yi3y z#nqnQ6?Gc--FD`fwpzmIr@45aQBE>J((l$W1o$k9-7*Dolzr++xt=Gg_vgFHPOGoh zuAiUC@3XOjNRJ!Lnu?zy>nFO$E;21tt|#rsO))$%PejUftXvo|>6RC{OI#BfR+H70 zm$*465>R$q%381uURsdE&b*}loFnsMdl0izwmIrr`8jD0o839Ai0$?)EsViV{1mns z$5KWsIMQ=mPHLoy9m62ymQeBm@s4i zyDG}vouvhpReLqsm0bVU+s0FsjpfBF?y8^rPAfncxA_)(s(}~rjiRqkMZCba$2lXL z@E5yCQFy67)kn-Sf!}~~p3MnZx3aYB^ihn+nd^u#yM{h@bB~A@$8FM-KrGt*sLtF+1m$cG~+Az5~k)>xD94s`0kGr6w=Az!|>f_bNrz*~{gT=fZHG^5q zJ6K6;V&{SE|6n`mS8*Se6H6<>A@(jVBsh$H)%5PE>FGfJ9@f*-wMQO%U~2c&6okP^ zvldBovyEe+bnVnINKTTb*oqQ@w$ z*5lBWZ3o+3w6%)kKEM=7yN`JVD<_7I0uPQ?8zjDvZimb|8uo~`Elckk8ib^l~?*Z%2Udn-=`CsNalil97N zd8%R0A<1vD4LasdF3ueP1eu2pSBt*ky36!Z)+CBDgyC7(c7Y@W2)Tis=14BK zv4Pf+Z1d9Q1tLdV8!jw)(vvLdlB9Q_vLUBUl;m~~P7@j0CcWI~#MO2=y@Wz0*;XY0 ztLme}Wa-Gs&6k&#N3tBd(Q;6WgAyp1MB?3`p~tAttVcOsI>~z`0<)_RZ0o}_D{~8O zllHfZ;k!1Jq7d=uHLl;+UmK)RufIYFP&b4MZt?Mis>v-t{wgdE&h+z8#M27%yw5cj zCg)95?t47Dvf^dW8JAES^+rdcwFupCYmMhvl2$>NS)NAYBgV5W%lvwnkOL({7LMmz zLpm6Va@O01m(451`9g1AYPAx-r}3OCk*w-0K}lBxFGJUCEYsG)-FZZZJ>nX4SZ~Kx zJnnSk=@)KL()(`dpTmCM7IhY>AMxsRtt5;wL-TPe%_!GejvXdKTeNGW*#_#t9H|&C zMKV5@x6Qit!8~PqvU#!5L2oi#qI`SsS(EIS492PxZSpX}D-32YWQT)J#8HFwZ6 z~3VA&L zE0VUDD43UQjTDYsd3XjjKXRN=G5ahm*zPLyWGU9MoK6y97=6TSUL?;G?`EwekTVlq zd4Y^gxZcm2#>=8i@N%rWKv;I?)-X`b0tH84_-o1ha`mL#r%r~)@F^K-MwE=UdiyGS zj%{9IJj30X?&hU-j0RY#&&kzyeymR|+t_NvhpY}4ZIegl3|TiEAW@~}q1{&h?dB8l zB~9VKEK^a(jN}fMFVbW4#YV?Vfy_1P>dlv}`xvh2xFBmexv6EcG50E2h2@c>3H*sY z9XDsf;l%-t>K%MNm7MPrmE<|z*6oI-_U4tikOr5%jkItiyY@TYmuibuVNzt7uw_f@ z(AL<5Q$0DtvcHGU_t#A%H-UOmE@MaF-f=K_kB_9tuW54aXDwG@Hao&`o|?;#=8ju^ zAIV6avXK&TMdfg&g~p*->bP|UTs`;!Rv7FEfr(~~NImviG~QE2xuU!rd~9TS+a`nb z)lq7DcgUS-b$%{urE!}La!-s-DfUq2x8noVqKRR*4P`uI!vvLM(42g6k|fp!uT~@N z_hG0J5lUCy*g~7@c2qAUZS^ch4&@DMhhB|Hg7Yz|(_tq=hw4U{XPv&)p)E~b!b2)8 zR>XGXCfhy-ziOXL#JOK=FSn0L>}l+aC%lR}1zVfIHlE_?IhIqLGo$F4o>DzAm{ zLBpOhl5?5-aI6)S;^Y{UX@# literal 0 HcmV?d00001 diff --git a/po/de.po b/po/de.po new file mode 100644 index 0000000..7b37d88 --- /dev/null +++ b/po/de.po @@ -0,0 +1,708 @@ +# German translation for gdbm. +# Copyright (C) 2011 Free Software Foundation, Inc. +# This file is distributed under the same license as the gdbm package. +# Mario Blättermann , 2011. +# +msgid "" +msgstr "" +"Project-Id-Version: gdbm 1.9.90\n" +"Report-Msgid-Bugs-To: bug-gdbm@gnu.org\n" +"POT-Creation-Date: 2011-11-13 11:47+0200\n" +"PO-Revision-Date: 2011-11-02 21:24+0100\n" +"Last-Translator: Mario Blättermann \n" +"Language-Team: German \n" +"Language: de\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n!=1);\n" +"X-Poedit-Language: German\n" +"X-Poedit-Country: GERMANY\n" + +#: src/gdbmerrno.c:31 +msgid "No error" +msgstr "Kein Fehler" + +#: src/gdbmerrno.c:32 +msgid "Malloc error" +msgstr "Fehler in Speicherzuweisung" + +#: src/gdbmerrno.c:33 +msgid "Block size error" +msgstr "Fehlerhafte Blockgröße" + +#: src/gdbmerrno.c:34 +msgid "File open error" +msgstr "Fehler beim Öffnen der Datei" + +#: src/gdbmerrno.c:35 +msgid "File write error" +msgstr "Datei-Schreibfehler" + +#: src/gdbmerrno.c:36 +msgid "File seek error" +msgstr "Suchfehler in Datei" + +#: src/gdbmerrno.c:37 +msgid "File read error" +msgstr "Dateilesefehler" + +#: src/gdbmerrno.c:38 +msgid "Bad magic number" +msgstr "" + +#: src/gdbmerrno.c:39 +msgid "Empty database" +msgstr "Leere Datenbank" + +#: src/gdbmerrno.c:40 +msgid "Can't be reader" +msgstr "Kann nicht Leser sein" + +#: src/gdbmerrno.c:41 +msgid "Can't be writer" +msgstr "Kann nicht Schreiber sein" + +#: src/gdbmerrno.c:42 +msgid "Reader can't delete" +msgstr "Leser kann nicht löschen" + +#: src/gdbmerrno.c:43 +msgid "Reader can't store" +msgstr "Leser kann nicht speichern" + +#: src/gdbmerrno.c:44 +msgid "Reader can't reorganize" +msgstr "Leser kann nicht reorganisieren" + +#: src/gdbmerrno.c:45 +msgid "Unknown update" +msgstr "Unbekannte Aktualisierung" + +#: src/gdbmerrno.c:46 src/testgdbm.c:395 +#, c-format +msgid "Item not found" +msgstr "Objekt nicht gefunden" + +#: src/gdbmerrno.c:47 +msgid "Reorganize failed" +msgstr "Reorganisieren gescheitert" + +#: src/gdbmerrno.c:48 +msgid "Cannot replace" +msgstr "Ersetzen nicht möglich" + +#: src/gdbmerrno.c:49 +msgid "Illegal data" +msgstr "Unzulässige Daten" + +#: src/gdbmerrno.c:50 +msgid "Option already set" +msgstr "Option wurde bereits definiert" + +#: src/gdbmerrno.c:51 +msgid "Illegal option" +msgstr "Ungültige Option" + +#: src/gdbmerrno.c:52 +msgid "Byte-swapped file" +msgstr "Datei mit vertauschten Bytes" + +#: src/gdbmerrno.c:53 +msgid "Wrong file offset" +msgstr "Falscher Datei-Offset" + +#: src/gdbmerrno.c:54 +msgid "Bad file flags" +msgstr "Datei-Flags sind fehlerhaft" + +#: src/gdbmerrno.c:55 +msgid "Cannot stat file" +msgstr "Status der Datei kann nicht gelesen werden" + +#: src/gdbmerrno.c:56 +#, fuzzy +msgid "Unexpected end of file" +msgstr "Unerwartetes Dateiende" + +#: src/gdbmerrno.c:64 +msgid "Unknown error" +msgstr "Unbekannter Fehler" + +#: src/bucket.c:67 src/bucket.c:148 +msgid "couldn't init cache" +msgstr "Der Zwischenspeicher konnte nicht initialisiert werden" + +#: src/bucket.c:97 src/bucket.c:311 src/falloc.c:185 src/falloc.c:282 +#: src/findkey.c:64 src/update.c:36 src/update.c:82 +msgid "lseek error" +msgstr "lseek-Fehler" + +#: src/bucket.c:188 src/falloc.c:259 src/findkey.c:57 src/gdbmseq.c:73 +msgid "malloc error" +msgstr "malloc-Fehler" + +#: src/falloc.c:181 +msgid "malloc failed" +msgstr "»malloc« schlug fehl" + +#: src/testgdbm.c:82 +#, c-format +msgid "" +"******* %s **********\n" +"\n" +"bits = %d\n" +"count= %d\n" +"Hash Table:\n" +msgstr "" +"******* %s **********\n" +"\n" +"Bits = %d\n" +"Anzahl= %d\n" +"Hash-Tabelle:\n" + +#: src/testgdbm.c:85 +#, c-format +msgid " # hash value key size data size data adr home\n" +msgstr " # Hash-Wert Schl.größe Datengröße Datenadr. Home\n" + +#: src/testgdbm.c:95 +#, c-format +msgid "" +"\n" +"Avail count = %1d\n" +msgstr "" +"\n" +"Verf. Anzahl = %1d\n" + +#: src/testgdbm.c:96 +#, c-format +msgid "Avail adr size\n" +msgstr "Verf. Adr. Größe\n" + +#: src/testgdbm.c:121 src/testgdbm.c:175 +#, c-format +msgid "Out of memory" +msgstr "Nicht genügend Speicher" + +#: src/testgdbm.c:160 +#, c-format +msgid "" +"\n" +"header block\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"Kopfblock\n" +"Größe = %d\n" +"Anzahl = %d\n" + +#: src/testgdbm.c:196 +#, c-format +msgid "" +"\n" +"block = %d\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"Block = %d\n" +"Größe = %d\n" +"Anzahl = %d\n" + +#: src/testgdbm.c:217 +#, c-format +msgid "" +"Bucket Cache (size %d):\n" +" Index: Address Changed Data_Hash \n" +msgstr "" +"Bucket-Zwischenspeicher (Größe %d):\n" +" Index: Adresse Geändert Daten-Hash \n" + +#: src/testgdbm.c:225 +msgid "True" +msgstr "Wahr" + +#: src/testgdbm.c:225 +msgid "False" +msgstr "Falsch" + +#: src/testgdbm.c:230 +#, c-format +msgid "Bucket cache has not been initialized.\n" +msgstr "Bucket-Zwischenspeicher wurde nicht initialisiert.\n" + +#: src/testgdbm.c:236 +#, c-format +msgid "Usage: %s OPTIONS\n" +msgstr "Aufruf: %s [OPTIONEN]\n" + +#: src/testgdbm.c:237 +#, c-format +msgid "Test and modify a GDBM database.\n" +msgstr "Eine GDBM-Datenbank testen und bearbeiten.\n" + +#: src/testgdbm.c:239 +#, c-format +msgid "" +"OPTIONS are:\n" +"\n" +msgstr "" +"OPTIONEN sind:\n" +"\n" + +#: src/testgdbm.c:240 +#, c-format +msgid " -b SIZE set block size\n" +msgstr " -b GRÖSSE Blockgröße festlegen\n" + +#: src/testgdbm.c:241 +#, c-format +msgid " -c SIZE set cache size\n" +msgstr " -c GRÖSSE Zwischenspeichergröße festlegen\n" + +#: src/testgdbm.c:242 +#, c-format +msgid " -g FILE operate on FILE instead of `junk.gdbm'\n" +msgstr " -g DATEI mit DATEI anstelle von »junk.gdbm« arbeiten\n" + +#: src/testgdbm.c:243 +#, c-format +msgid " -h print this help summary\n" +msgstr " -h diese Hilfe-Zusammenfassung anzeigen\n" + +#: src/testgdbm.c:244 +#, c-format +msgid " -l disable file locking\n" +msgstr " -l Dateisperrung deaktivieren\n" + +#: src/testgdbm.c:245 +#, c-format +msgid " -m disable file mmap\n" +msgstr " -m mmap der Datei deaktivieren\n" + +#: src/testgdbm.c:246 +#, c-format +msgid " -n create database\n" +msgstr " -n Datenbank anlegen\n" + +#: src/testgdbm.c:247 +#, c-format +msgid " -r open database in read-only mode\n" +msgstr " -r Datenbank schreibgeschützt öffnen\n" + +#: src/testgdbm.c:248 +#, c-format +msgid " -s synchronize to the disk after each write\n" +msgstr "" +" -s nach jedem Schreibvorgang mit Festplatte abgleichen\n" + +#: src/testgdbm.c:249 +#, c-format +msgid " -v print program version\n" +msgstr " -v Programmversion ausgeben\n" + +#: src/testgdbm.c:251 +#, c-format +msgid "Report bugs to <%s>.\n" +msgstr "Melden Sie Fehler an %s.\n" + +#: src/testgdbm.c:290 +#, c-format +msgid "cannot open file `%s' for reading: %s" +msgstr "Die Datei »%s« kann nicht zum Lesen geöffnet werden: %s" + +#: src/testgdbm.c:301 +#, c-format +msgid "%s:%d: line too long" +msgstr "%s:%d: Zeile ist zu lang" + +#: src/testgdbm.c:309 +#, c-format +msgid "%s:%d: malformed line" +msgstr "%s:%d: fehlerhafte Zeile" + +#: src/testgdbm.c:320 +#, c-format +msgid "%d: item not inserted: %s" +msgstr "%d: Objekt nicht eingefügt: %s" + +#: src/testgdbm.c:379 +#, c-format +msgid "There is %d item in the database.\n" +msgid_plural "There are %d items in the database.\n" +msgstr[0] "Es gibt %d Objekt in der Datenbank.\n" +msgstr[1] "Es gibt %d Objekte in der Datenbank.\n" + +#: src/testgdbm.c:397 +#, c-format +msgid "Can't delete: %s" +msgstr "Löschen nicht möglich: %s" + +#: src/testgdbm.c:416 src/testgdbm.c:450 src/testgdbm.c:475 +#, c-format +msgid "No such item found.\n" +msgstr "Kein entsprechendes Objekt gefunden.\n" + +#: src/testgdbm.c:431 +#, c-format +msgid "Item not inserted.\n" +msgstr "Objekt nicht eingefügt.\n" + +#: src/testgdbm.c:487 +#, c-format +msgid "Reorganization failed.\n" +msgstr "Reorganisieren gescheitert.\n" + +#: src/testgdbm.c:489 +#, c-format +msgid "Reorganization succeeded.\n" +msgstr "Erfolgreich reorganisiert.\n" + +#: src/testgdbm.c:521 +msgid "Current bucket" +msgstr "Aktueller Bucket" + +#: src/testgdbm.c:522 +#, c-format +msgid "" +"\n" +" current directory entry = %d.\n" +msgstr "" +"\n" +" aktueller Ordsereintrag = %d.\n" + +#: src/testgdbm.c:524 +#, c-format +msgid " current bucket address = %lu.\n" +msgstr " Aktuelle Bucket-Adresse = %lu.\n" + +#: src/testgdbm.c:535 src/testgdbm.c:544 +#, c-format +msgid "not a number (stopped near %s)\n" +msgstr "keine Zahl (gestoppt nahe %s)\n" + +#: src/testgdbm.c:563 +#, c-format +msgid "Not a bucket.\n" +msgstr "Kein Bucket.\n" + +#: src/testgdbm.c:588 +#, c-format +msgid "Hash table directory.\n" +msgstr "Ordner der Hash-Tabelle.\n" + +#: src/testgdbm.c:589 +#, c-format +msgid "" +" Size = %d. Bits = %d. \n" +"\n" +msgstr "" +" Größe = %d. Bits = %d. \n" +"\n" + +#: src/testgdbm.c:608 +#, c-format +msgid "" +"\n" +"File Header: \n" +"\n" +msgstr "" +"\n" +"Dateikopf: \n" +"\n" + +#: src/testgdbm.c:609 +#, c-format +msgid " table = %lu\n" +msgstr " Tabelle = %lu\n" + +#: src/testgdbm.c:611 +#, c-format +msgid " table size = %d\n" +msgstr " Tabellengröße = %d\n" + +#: src/testgdbm.c:612 +#, c-format +msgid " table bits = %d\n" +msgstr " Tabellen-Bits = %d\n" + +#: src/testgdbm.c:613 +#, c-format +msgid " block size = %d\n" +msgstr " Blockgröße = %d\n" + +#: src/testgdbm.c:614 +#, c-format +msgid " bucket elems = %d\n" +msgstr " Bucket-Elemente = %d\n" + +#: src/testgdbm.c:615 +#, c-format +msgid " bucket size = %d\n" +msgstr " Bucket-Größe = %d\n" + +#: src/testgdbm.c:616 +#, c-format +msgid " header magic = %x\n" +msgstr "" + +#: src/testgdbm.c:617 +#, c-format +msgid " next block = %lu\n" +msgstr " nächster Block = %lu\n" + +#: src/testgdbm.c:619 +#, c-format +msgid " avail size = %d\n" +msgstr " verf. Größe = %d\n" + +#: src/testgdbm.c:620 +#, c-format +msgid " avail count = %d\n" +msgstr " verf. Anzahl = %d\n" + +#: src/testgdbm.c:621 +#, c-format +msgid " avail nx blk = %lu\n" +msgstr "" + +#: src/testgdbm.c:633 +#, c-format +msgid "hash value = %x. \n" +msgstr "Prüfsumme = %x. \n" + +#: src/testgdbm.c:689 +#, c-format +msgid "cannot fetch data (key %.*s)" +msgstr "Daten können nicht geholt werden (Schlüssel %.*s)" + +#: src/testgdbm.c:722 +#, c-format +msgid "gdbm_export failed, %s" +msgstr "gdbm_export gescheitert, %s" + +#: src/testgdbm.c:735 +#, c-format +msgid "gdbm_import failed, %s" +msgstr "gdbm_import gescheitert, %s" + +#: src/testgdbm.c:741 +msgid "yes" +msgstr "ja" + +#: src/testgdbm.c:741 +msgid "no" +msgstr "nein" + +#: src/testgdbm.c:749 +#, c-format +msgid "Database file: %s\n" +msgstr "Datenbankdatei: %s\n" + +#: src/testgdbm.c:750 src/testgdbm.c:760 +#, c-format +msgid "Zero terminated keys: %s\n" +msgstr "" + +#: src/testgdbm.c:751 +#, c-format +msgid "Zero terminated data: %s\n" +msgstr "" + +#: src/testgdbm.c:792 +msgid "count (number of entries)" +msgstr "Anzahl (der Einträge)" + +#: src/testgdbm.c:795 src/testgdbm.c:801 src/testgdbm.c:813 src/testgdbm.c:845 +msgid "key" +msgstr "Schlüssel" + +#: src/testgdbm.c:795 +msgid "delete" +msgstr "löschen" + +#: src/testgdbm.c:798 src/testgdbm.c:804 src/testgdbm.c:819 +msgid "file" +msgstr "Datei" + +#: src/testgdbm.c:798 +msgid "export" +msgstr "Exportieren" + +#: src/testgdbm.c:801 +msgid "fetch" +msgstr "Holen" + +#: src/testgdbm.c:804 +msgid "import" +msgstr "Importieren" + +#: src/testgdbm.c:807 +msgid "list" +msgstr "Liste" + +#: src/testgdbm.c:810 +msgid "[key]" +msgstr "[Schlüssel]" + +#: src/testgdbm.c:810 +msgid "nextkey" +msgstr "" + +#: src/testgdbm.c:813 +msgid "data" +msgstr "Daten" + +#: src/testgdbm.c:813 +msgid "store" +msgstr "speichern" + +#: src/testgdbm.c:816 +msgid "firstkey" +msgstr "" + +#: src/testgdbm.c:820 +msgid "read entries from file and store" +msgstr "Einträge aus Datei lesen und speichern" + +#: src/testgdbm.c:823 +msgid "reorganize" +msgstr "reorganisieren" + +#: src/testgdbm.c:826 +msgid "toggle key nul-termination" +msgstr "" + +#: src/testgdbm.c:829 +msgid "print avail list" +msgstr "Verfügbare Liste ausgeben" + +#: src/testgdbm.c:832 +msgid "bucket-number" +msgstr "Bucket-Nummer" + +#: src/testgdbm.c:832 +msgid "print a bucket" +msgstr "Ein Bucket ausgeben" + +#: src/testgdbm.c:836 +msgid "print current bucket" +msgstr "Aktuellen Bucket ausgeben" + +#: src/testgdbm.c:839 +msgid "print hash directory" +msgstr "Hash-Ordner ausgeben" + +#: src/testgdbm.c:842 +msgid "print file header" +msgstr "Dateikopf ausgeben" + +#: src/testgdbm.c:845 +msgid "hash value of key" +msgstr "Hash-Wert des Schlüssels" + +#: src/testgdbm.c:848 +msgid "print the bucket cache" +msgstr "Bucket-Zwischenspeicher ausgeben" + +#: src/testgdbm.c:851 +msgid "print current program status" +msgstr "Aktuellen Programmstatus ausgeben" + +#: src/testgdbm.c:854 +msgid "print version of gdbm" +msgstr "Programmversion von gdbm ausgeben" + +#: src/testgdbm.c:857 +msgid "toggle data nul-termination" +msgstr "" + +#: src/testgdbm.c:860 +msgid "print this help list" +msgstr "Diese Hilfe ausgeben" + +#: src/testgdbm.c:863 +msgid "quit the program" +msgstr "Das Programm beenden" + +#: src/testgdbm.c:1063 +#, c-format +msgid "-s is incompatible with -r" +msgstr "-s ist inkompatibel zu -r" + +#: src/testgdbm.c:1070 +#, c-format +msgid "-r is incompatible with -n" +msgstr "-r ist inkompatibel zu -n" + +#: src/testgdbm.c:1077 +#, c-format +msgid "-n is incompatible with -r" +msgstr "-n ist inkompatibel zu -r" + +#: src/testgdbm.c:1099 +#, c-format +msgid "unknown option; try `%s -h' for more info\n" +msgstr "Unbekannte Option, versuchen Sie »%s -h« für weitere Informationen\n" + +#: src/testgdbm.c:1123 +#, c-format +msgid "gdbm_open failed: %s" +msgstr "gdbm_open fehlgeschlagen: %s" + +#: src/testgdbm.c:1127 +#, c-format +msgid "gdbm_setopt failed: %s" +msgstr "gdbm_setopt fehlgeschlagen: %s" + +#: src/testgdbm.c:1133 +#, c-format +msgid "" +"\n" +"Welcome to the gdbm test program. Type ? for help.\n" +"\n" +msgstr "" +"\n" +"Willkommen zum Testrprogramm gdbm. Geben Sie ? ein für Hilfe.\n" +"\n" + +#: src/testgdbm.c:1166 +#, c-format +msgid "Invalid command. Try ? for help." +msgstr "Ungültiger Befehl. Geben Sie ? ein für Hilfe." + +#: src/testgdbm.c:1167 +#, c-format +msgid "Unknown command" +msgstr "Unbekannter Befehl" + +#: src/testgdbm.c:1182 +#, fuzzy, c-format +msgid "%s: not enough arguments" +msgstr "%c: Nicht genug Argumente" + +#: src/testgdbm.c:1187 +#, c-format +msgid "unexpected eof" +msgstr "Unerwartetes Dateiende" + +#: src/testgdbm.c:1208 +#, c-format +msgid "cannot run pager `%s': %s" +msgstr "Pager »%s« kann nicht ausgeführt werden: %s" + +#: src/update.c:110 +#, c-format +msgid "gdbm fatal: %s\n" +msgstr "Schwerwiegender Fehler in gdbm: %s\n" + +#~ msgid "read error" +#~ msgstr "read-Fehler" + +#~ msgid "write error" +#~ msgstr "write-Fehler" + +#~ msgid "Multicharacter commands are not yet implemented.\n" +#~ msgstr "Befehle mit mehreren Zeichen sind noch nicht implementiert.\n" diff --git a/po/en@boldquot.header b/po/en@boldquot.header new file mode 100644 index 0000000..fedb6a0 --- /dev/null +++ b/po/en@boldquot.header @@ -0,0 +1,25 @@ +# All this catalog "translates" are quotation characters. +# The msgids must be ASCII and therefore cannot contain real quotation +# characters, only substitutes like grave accent (0x60), apostrophe (0x27) +# and double quote (0x22). These substitutes look strange; see +# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html +# +# This catalog translates grave accent (0x60) and apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019). +# It also translates pairs of apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019) +# and pairs of quotation mark (0x22) to +# left double quotation mark (U+201C) and right double quotation mark (U+201D). +# +# When output to an UTF-8 terminal, the quotation characters appear perfectly. +# When output to an ISO-8859-1 terminal, the single quotation marks are +# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to +# grave/acute accent (by libiconv), and the double quotation marks are +# transliterated to 0x22. +# When output to an ASCII terminal, the single quotation marks are +# transliterated to apostrophes, and the double quotation marks are +# transliterated to 0x22. +# +# This catalog furthermore displays the text between the quotation marks in +# bold face, assuming the VT100/XTerm escape sequences. +# diff --git a/po/en@quot.header b/po/en@quot.header new file mode 100644 index 0000000..a9647fc --- /dev/null +++ b/po/en@quot.header @@ -0,0 +1,22 @@ +# All this catalog "translates" are quotation characters. +# The msgids must be ASCII and therefore cannot contain real quotation +# characters, only substitutes like grave accent (0x60), apostrophe (0x27) +# and double quote (0x22). These substitutes look strange; see +# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html +# +# This catalog translates grave accent (0x60) and apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019). +# It also translates pairs of apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019) +# and pairs of quotation mark (0x22) to +# left double quotation mark (U+201C) and right double quotation mark (U+201D). +# +# When output to an UTF-8 terminal, the quotation characters appear perfectly. +# When output to an ISO-8859-1 terminal, the single quotation marks are +# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to +# grave/acute accent (by libiconv), and the double quotation marks are +# transliterated to 0x22. +# When output to an ASCII terminal, the single quotation marks are +# transliterated to apostrophes, and the double quotation marks are +# transliterated to 0x22. +# diff --git a/po/fi.gmo b/po/fi.gmo new file mode 100644 index 0000000000000000000000000000000000000000..ea127097062948d540459a8b270ec3c9d893f812 GIT binary patch literal 10435 zcma)>dyr+tUB{d72)O~&0LEYf9g<;pfjik<-m@&rK4I9M-Gv<>fP_6e_sqR#?z!h& z&SQ2jB$0pt9})eBM=JV@IkAe)oI2``6vS{=K^U?5poO=Q+dk4D?=T{v2a|ANC2r z!Jh=52X6#_8@v*H75pH0)&<7w0ke`yc)dxLSr_7v)~l?D0l<- z0(cwv7vMGE1s8ewZU!%*d@pz@xD?7y1bi;w=L5bH@NYoz|7*Y>hx$u@!jE?~XldU8 zz6U%S>K_Bu@7KVaz?ZG!?h`@yZ?9pF5OE1KT`wXWX+HU95{n*SA0<9-9wIIn@S+kXbU5Mia4 z4WRn9LHYMKP=5AdQ2ZYU>0(|C z2bBGO0BYWgF|y+LN>J;V13!0`F?WNK?|*;B$M0n*Tl4P&w}TIXo4`+l>c0Z+0bd7Y zpX-=JasL1){!fB8fGeQ#!vBD`fHx!52f+eV-gyDs4gNi-{+FYK_knkT*MdE88hj4? z0Qfafa(xeEYV$)-`gk{;B!3%ZDP|5-eGH2K@qoV$%5Pr+#s8-uQ=5MQF9*-&XFGT$ zsC6C<_$vWl1|`R9pyoN3K~R}_A1M9a2p$Iag324ugQ(to6_h`H6I8$Nfs#wclN~Pw zHQ!aB?0+{XzJ*YJ9F+h5DyV+XgNlPMfZ}@vlpNm*_y(x;zk|gJuK?TN4WRljg!&Vp z{Px*^p8+l9&w-NT&p^rjZBX;P4$8mJyV9@g5>WQP2Gsm_gVN6u$P&%7AYIJwfWHX- zRcLUTcEO5UsZQ9K_AcmzC~@`K>H;735|y8}wD0f-BmCqP`zd?w%@g!*rW z@*AM!zVIrKSArV%Ch%Nv8>n%2g323rfztndpzOH-Y8}VHw}DTC9|C^~lwST2lwbWh zDF6QtP{tKY&`UMb`nm-05?`xps`fqS6_+wE1vUQ`k z-%(KZdJ;Sj{0ev$_z-j#q}WxQN)|nm^*Z;)SpnQ1-leuia%96he z6_D2SC?uWU34IL8p|?YlOOMv0=T>N^d-Fec06!1iJyCav_Yt%l>a;f~UY`zS!D4v7 z2|NZJgwBCdNWLk*xF4E)vQYRWDF5FKJp=89q{rQm^sna$NII_}*|%p1zih02I={@2NQvZ!~5-E37vqBLzv7gLH9y>%kx@Mvgl@g}alK(J{=kC>u$?N!E3&gEwbo%%S7UPT^Z9 zVhJw|9*au9Ml`qXVU5|C$0nJjSErq4>BtW9j_*~j>tk&>$`*P>p2_^ddsso=MvGNk z*cipy<3&>W?#rii_qqvQW|!llO!7?2IHCc!TRE|{yOOGOzBMgxwKkgYY43C6%IpLt zcRrcctE|C^6ceiSe!IT1Ug+a6aT*W&WRBBUde)|U@aaL+O%^o$32|oeiN@Pp9Qf(c zIA#nFtdq6Jw5kv@4B%PU3e^PnF)v2c=@fBECpQw&J=K}9D0g79yuxHB?I zXVjP`ne39|Nm;k497HK$Jcv84*<9@(dfD&_v|3I)w`3R4?(I&+=e*W5(=zSM;?hY* z<`_m*qJW*1@RVqr0jx}__6#b@>4SX`K0 zE(bZa#YK@*;dQm!#q>tkFxA;K)3SCp>%=E!tlinDad$7ux~ReKAv7Lwi(^9H-{%Ap zlGE+6nBYjVq)MU`v6NYNjjFg^9*>4YMv#PNca&|w2VxgFh&C>}2x!V3JgkbHkzkPF zig=ht3$DM4WffInz>wR$`HiGh0J}yF&@y`m!)i2+TC*=o%hUMpJw?{*h2o*Z^RtHz9p?tVi!}F8PkLH#2J;44TUW$+(T$YV*4CHou&N5JxIJ6KB0H>eiFNge zy%5KpwM|&hu`|dpFL0N-TPkzjI#u4rO6IleqCn-`WO2kI@7S|zZfs$3^x`5`3{7>s zPDs_-w43xkW{F@6JPNo|n2I_!_h$VpKb|#a8<)MKG_CcJ!C@|=u5(-)^xZP|llr?p zKJ&#zDf+><;1CfPgCwI*$BE^Ab$tuFd+A#q;`L$Ut=SH7jcpVRi*beRwKls^$APKo ztIJI$G&&!5$>Hc!xxt-HWN~&(7hZv@s53i6^1_PCx8!x&QLrkcaRau0>)r=F%xTs%Din2m9<4#SB@TPuMDnH`+gUzocW*yrj$-o)kyTWR< zUy$<;C#M?%trBEm2v<#3YK}>yr+*13P z`eZqO3bLS(jkvx`by*x0tYcHl_|3Zs!=~u=W;dg6U%Q6|uBNit`IYnPGBi4i`b{>} zxYdnQQK*#Dd!GpwTz}A-5F(r`WLD|aJX&LS4G;t{K0SJi+r=Uuc&An*`k0@{2)?4q zyIriV-EmXf?sNxHN~0e2LEO*-raDe^{FFr}Ztyzo%SwLOM5<_QI2VA*|&GI zdYaVLI(%rpy_+Q~eYN)xr!#iz<}F*=`n%3<*)nteP1kJRx_L8-nUj^G)>K6d(d7?ZkI*N=`yd2g_t8uH=fSoYITSijMkc) zo!h&roGsIvTf6hDBADB{!pxAHPE;Ra!%ebncA*y)gxB_a=l8X5Ugguwi*eE3%h|?f zlbbmWwGO9s5vA>YtboLo4PCL^zIB`RuiH0f_Wj%KmQCBZ_}FaJA94E1xYYFH0fOg6 zvYhy1EbaSOPI7>#s+E(dw_G`C^E6(LY+Cp0!OF>%lLb`-x4W;+CvhidfOcM$4Ce1_ z^Kr2pS9O|4&I8a9K~$G{Zz)a(QIv6RJ~YHEHPyDyEs1=Zrjgy@u5M}G>*r3GRzK&> zzpkHMH#k41<9`cQcg%J7xGG_(x*}nIYIR=E{4};oNN3^Q7utE5v$-QY08 z{fFFW;fF&Hi*PcitK(WY1K0A($ut?%OrMN-yLNtd@18?P=EtK}c```GwbDzR^ilag zJ@K343mxxnrcUHl;yJz-IE`VvxmhAK%WmV*cKlT2Hkyy}}%l4CE3A@x~S?5bptrxYY z5$J|E?Pajffgn#TzC5x^c|S@@*3}HvS78bJ^ih->h8zua`2lZjw>jPvn7dqD;lj5$38Ix${W4Y`Xl$c{ojyh$B~0p*R!Th)S2!vO%2_d&-Mq zf0N5+qb(e+Ul)m6z5 zIx3HaH+vJiOo+S9L>X%-T2mE*y^6;59iR59D01H7`%~G^i)9_HS1anOtoh2vVX*BI zbXKvujkU%V`(U%FHm+*i>M$IAf_60t!jF1n8g*v7QM1`Q#AEX^Q5TnTGi^+D>9xFC zsgPS=7voQv+pA@fRo*7EjR*1jp7YP~zK<&JlO^Mns7V^3P|vtl;SjtwTU+Zk?kb<2 z*vogcS9kMivvV~r)0LM;)hHWPYbryaB80zRxBc3rbP1&sh%7Mf%ypUVknJ;SVxF!r zDC!%nYehQ`%+4Q~otxchbF8Rq_kBL@GDXi)ZnbI4bIhFEj7gEhVV#%*&Sjj#$&Iuj z;u-6!v0bsmiAJ$w>zdnFN?u&g#a$~UvC{qChNbBk^W8GW;<=8KRh=O6X?fnNeR2#l zn-16#BQ)ovwj1NDn{rW22)<3$MLlN#E?S&;-F?34Kqg!{nPu$xPU%R*vexqd|IfQD zMV|@Su9qT9KJE8;y<^v0d)3(^@dVe;v}4OAQyp*7H*2e0PZuTpk3sAcYH&g`zgp#; zXrcmDSXtI8jabi`* z$BS7`V(#a4C-U`N4osY}=P`~p*S1@q>E}H{g#1_fJA$*C*XQKdiAf({{TLCxQJlWf ze_ou3FSpLg?-i5%Tw}8Xxl4hLH2Q8KIkizwHkzu=T|z)vb@>k#YYJ;Z z-8AQb-Ji@pooN%@F6f-tgir{_Wt~XKdx0dm)GHz*Pobah}8);_sf-+WSGndTO_9txb zSG5g7kzJ&Fozdd3jk=i7u0Z(syqiU)$+l~f^te@r2du|e7DY9wT7BIO$j2de*XI!* z^L{5%7o8W@ckmU;niD-t-pL6!pQM_wC2q9QaFXix6BIGdV$BA-EgW8z9+78tGxhP# Orx$ne>yP9M=KlcRf(|wS literal 0 HcmV?d00001 diff --git a/po/fi.po b/po/fi.po new file mode 100644 index 0000000..5861e96 --- /dev/null +++ b/po/fi.po @@ -0,0 +1,712 @@ +# Finnish messages for gdbm. +# Copyright © 2011 Free Software Foundation, Inc. +# This file is distributed under the same license as the gdbm package. +# Jorma Karvonen , 2011. +# +msgid "" +msgstr "" +"Project-Id-Version: gdbm 1.9.90\n" +"Report-Msgid-Bugs-To: bug-gdbm@gnu.org\n" +"POT-Creation-Date: 2011-11-13 11:47+0200\n" +"PO-Revision-Date: 2011-10-14 19:45+0200\n" +"Last-Translator: Jorma Karvonen \n" +"Language-Team: Finnish \n" +"Language: fi\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" + +#: src/gdbmerrno.c:31 +msgid "No error" +msgstr "Ei virhettä" + +#: src/gdbmerrno.c:32 +msgid "Malloc error" +msgstr "Malloc-virhe" + +#: src/gdbmerrno.c:33 +msgid "Block size error" +msgstr "Lohkokokovirhe" + +#: src/gdbmerrno.c:34 +msgid "File open error" +msgstr "Tiedoston avausvirhe" + +#: src/gdbmerrno.c:35 +msgid "File write error" +msgstr "Tiedoston kirjoitusvirhe" + +#: src/gdbmerrno.c:36 +msgid "File seek error" +msgstr "Tiedoston etsintävirhe" + +#: src/gdbmerrno.c:37 +msgid "File read error" +msgstr "Tiedoston lukuvirhe" + +#: src/gdbmerrno.c:38 +msgid "Bad magic number" +msgstr "Väärä maaginen numero" + +#: src/gdbmerrno.c:39 +msgid "Empty database" +msgstr "Tyhjä tietokanta" + +#: src/gdbmerrno.c:40 +msgid "Can't be reader" +msgstr "Ei voi olla lukija" + +#: src/gdbmerrno.c:41 +msgid "Can't be writer" +msgstr "Ei voi olla kirjoittaja" + +#: src/gdbmerrno.c:42 +msgid "Reader can't delete" +msgstr "Lukijaa ei voi poistaa" + +#: src/gdbmerrno.c:43 +msgid "Reader can't store" +msgstr "Lukijaa ei voi tallentaa" + +#: src/gdbmerrno.c:44 +msgid "Reader can't reorganize" +msgstr "Lukijaa ei voi järjestää uudelleen" + +#: src/gdbmerrno.c:45 +msgid "Unknown update" +msgstr "Tuntematon päivitys" + +#: src/gdbmerrno.c:46 src/testgdbm.c:395 +#, c-format +msgid "Item not found" +msgstr "Alkiota ei löytynyt" + +#: src/gdbmerrno.c:47 +msgid "Reorganize failed" +msgstr "Uudelleenjärjestely epäonnistui" + +#: src/gdbmerrno.c:48 +msgid "Cannot replace" +msgstr "Ei voida korvata" + +#: src/gdbmerrno.c:49 +msgid "Illegal data" +msgstr "Virheellisiä tietoja" + +#: src/gdbmerrno.c:50 +msgid "Option already set" +msgstr "Valitsin on jo asetettu" + +#: src/gdbmerrno.c:51 +msgid "Illegal option" +msgstr "Virheellinen valitsin" + +#: src/gdbmerrno.c:52 +msgid "Byte-swapped file" +msgstr "Tavuvaihdettu tiedosto" + +#: src/gdbmerrno.c:53 +msgid "Wrong file offset" +msgstr "Väärä tiedostosiirrososoite" + +#: src/gdbmerrno.c:54 +msgid "Bad file flags" +msgstr "Väärät tiedostoliput" + +#: src/gdbmerrno.c:55 +msgid "Cannot stat file" +msgstr "Ei voida kutsua stat-toimintoa tiedostolle" + +#: src/gdbmerrno.c:56 +#, fuzzy +msgid "Unexpected end of file" +msgstr "odottamaton tiedoston loppumerkki" + +#: src/gdbmerrno.c:64 +msgid "Unknown error" +msgstr "Tuntematon virhe" + +#: src/bucket.c:67 src/bucket.c:148 +msgid "couldn't init cache" +msgstr "ei voitu alustaa välimuistia" + +#: src/bucket.c:97 src/bucket.c:311 src/falloc.c:185 src/falloc.c:282 +#: src/findkey.c:64 src/update.c:36 src/update.c:82 +msgid "lseek error" +msgstr "lseek-virhe" + +#: src/bucket.c:188 src/falloc.c:259 src/findkey.c:57 src/gdbmseq.c:73 +msgid "malloc error" +msgstr "malloc-virhe" + +#: src/falloc.c:181 +msgid "malloc failed" +msgstr "malloc epäonnistui" + +#: src/testgdbm.c:82 +#, c-format +msgid "" +"******* %s **********\n" +"\n" +"bits = %d\n" +"count= %d\n" +"Hash Table:\n" +msgstr "" +"******* %s **********\n" +"\n" +"bitit = %d\n" +"laskuri= %d\n" +"Tiivistetaulu:\n" + +#: src/testgdbm.c:85 +#, c-format +msgid " # hash value key size data size data adr home\n" +msgstr " # tiivistearvo avainkoko tietokoko tieto-osoite koti\n" + +#: src/testgdbm.c:95 +#, c-format +msgid "" +"\n" +"Avail count = %1d\n" +msgstr "" +"\n" +"Käytettävissä oleva lukumäärä = %1d\n" + +#: src/testgdbm.c:96 +#, c-format +msgid "Avail adr size\n" +msgstr "Käytettävissä oleva osoite koko\n" + +#: src/testgdbm.c:121 src/testgdbm.c:175 +#, c-format +msgid "Out of memory" +msgstr "Muisti loppui" + +#: src/testgdbm.c:160 +#, c-format +msgid "" +"\n" +"header block\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"otsakelohko\n" +"koko = %d\n" +"lukumäärä = %d\n" + +#: src/testgdbm.c:196 +#, c-format +msgid "" +"\n" +"block = %d\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"lohko = %d\n" +"koko = %d\n" +"lukumäärä = %d\n" + +# Esimerkiksi puhelinluettelon A-kirjaimella alkavat nimet muodostavat \"bucket\":in. +#: src/testgdbm.c:217 +#, c-format +msgid "" +"Bucket Cache (size %d):\n" +" Index: Address Changed Data_Hash \n" +msgstr "" +"Säiliön välimuisti (koko %d):\n" +" Indeksi: Osoite Muuttunut Tieto_tiiviste \n" + +#: src/testgdbm.c:225 +msgid "True" +msgstr "Tosi" + +#: src/testgdbm.c:225 +msgid "False" +msgstr "Epätosi" + +#: src/testgdbm.c:230 +#, c-format +msgid "Bucket cache has not been initialized.\n" +msgstr "Säiliövälimuistia ei ole alustettu.\n" + +#: src/testgdbm.c:236 +#, c-format +msgid "Usage: %s OPTIONS\n" +msgstr "Käyttö: %s VALITSIMET\n" + +#: src/testgdbm.c:237 +#, c-format +msgid "Test and modify a GDBM database.\n" +msgstr "Testaa ja muokkaa GBM-tietokantaa.\n" + +#: src/testgdbm.c:239 +#, c-format +msgid "" +"OPTIONS are:\n" +"\n" +msgstr "" +"VALITSIMIA ovat:\n" +"\n" + +#: src/testgdbm.c:240 +#, c-format +msgid " -b SIZE set block size\n" +msgstr " -b KOKO aseta lohkokoko\n" + +#: src/testgdbm.c:241 +#, c-format +msgid " -c SIZE set cache size\n" +msgstr " -c KOKO aseta välimuistikoko\n" + +#: src/testgdbm.c:242 +#, c-format +msgid " -g FILE operate on FILE instead of `junk.gdbm'\n" +msgstr " -g TIEDOSTO toimi TIEDOSTOlla eikä ”junk.gdbm”\n" + +#: src/testgdbm.c:243 +#, c-format +msgid " -h print this help summary\n" +msgstr " -h tulosta tämä opasteyhteenveto\n" + +#: src/testgdbm.c:244 +#, c-format +msgid " -l disable file locking\n" +msgstr " -l ota pois käytöstä tiedostojen lukitus\n" + +#: src/testgdbm.c:245 +#, c-format +msgid " -m disable file mmap\n" +msgstr " -m ota pois käytöstä tiedoston mmap\n" + +#: src/testgdbm.c:246 +#, c-format +msgid " -n create database\n" +msgstr " -n luo tietokanta\n" + +#: src/testgdbm.c:247 +#, c-format +msgid " -r open database in read-only mode\n" +msgstr " -r avaa tietokanta kirjoitussuojautussa tilassa\n" + +#: src/testgdbm.c:248 +#, c-format +msgid " -s synchronize to the disk after each write\n" +msgstr " -s synkronoi levy jokaisen kirjoituksen jälkeen\n" + +#: src/testgdbm.c:249 +#, c-format +msgid " -v print program version\n" +msgstr " -v tulosta ohjelmaversio\n" + +#: src/testgdbm.c:251 +#, c-format +msgid "Report bugs to <%s>.\n" +msgstr "" +"Ilmoita vioista (englanniksi) osoitteeseen <%s>.\n" +"Ilmoita käännösvirheistä osoitteeseen .\n" + +#: src/testgdbm.c:290 +#, c-format +msgid "cannot open file `%s' for reading: %s" +msgstr "ei voida avata tiedostoa ”%s” lukemista varten: %s" + +#: src/testgdbm.c:301 +#, c-format +msgid "%s:%d: line too long" +msgstr "%s:%d: rivi on liian pitkä" + +#: src/testgdbm.c:309 +#, c-format +msgid "%s:%d: malformed line" +msgstr "%s:%d: vääränmuotoinen rivi" + +#: src/testgdbm.c:320 +#, c-format +msgid "%d: item not inserted: %s" +msgstr "%d: alkiota ei ole lisätty: %s" + +#: src/testgdbm.c:379 +#, c-format +msgid "There is %d item in the database.\n" +msgid_plural "There are %d items in the database.\n" +msgstr[0] "Tietokannassa on %d alkio.\n" +msgstr[1] "Tietokannassa on %d alkiota.\n" + +#: src/testgdbm.c:397 +#, c-format +msgid "Can't delete: %s" +msgstr "Ei voida poistaa: %s" + +#: src/testgdbm.c:416 src/testgdbm.c:450 src/testgdbm.c:475 +#, c-format +msgid "No such item found.\n" +msgstr "Ei löytynyt sellaista alkiota.\n" + +#: src/testgdbm.c:431 +#, c-format +msgid "Item not inserted.\n" +msgstr "Alkiota ei lisätty.\n" + +#: src/testgdbm.c:487 +#, c-format +msgid "Reorganization failed.\n" +msgstr "Uudelleenjärjestely epäonnistui.\n" + +#: src/testgdbm.c:489 +#, c-format +msgid "Reorganization succeeded.\n" +msgstr "Uudelleenjärjestely onnistui.\n" + +#: src/testgdbm.c:521 +msgid "Current bucket" +msgstr "Nykyinen säiliö" + +#: src/testgdbm.c:522 +#, c-format +msgid "" +"\n" +" current directory entry = %d.\n" +msgstr "" +"\n" +" nykyinen hakemistorivi = %d.\n" + +#: src/testgdbm.c:524 +#, c-format +msgid " current bucket address = %lu.\n" +msgstr " nykyinen säiliöosoite = %lu.\n" + +#: src/testgdbm.c:535 src/testgdbm.c:544 +#, c-format +msgid "not a number (stopped near %s)\n" +msgstr "ei ole numero (pysähtyi kohteen %s lähellä)\n" + +#: src/testgdbm.c:563 +#, c-format +msgid "Not a bucket.\n" +msgstr "Ei ole säiliö.\n" + +#: src/testgdbm.c:588 +#, c-format +msgid "Hash table directory.\n" +msgstr "Tiivistetauluhakemisto.\n" + +#: src/testgdbm.c:589 +#, c-format +msgid "" +" Size = %d. Bits = %d. \n" +"\n" +msgstr "" +" Koko = %d. Bitit = %d. \n" +"\n" + +#: src/testgdbm.c:608 +#, c-format +msgid "" +"\n" +"File Header: \n" +"\n" +msgstr "" +"\n" +"Tiedosto-otsake: \n" +"\n" + +#: src/testgdbm.c:609 +#, c-format +msgid " table = %lu\n" +msgstr " taulukko = %lu\n" + +#: src/testgdbm.c:611 +#, c-format +msgid " table size = %d\n" +msgstr " taulukkokoko = %d\n" + +#: src/testgdbm.c:612 +#, c-format +msgid " table bits = %d\n" +msgstr " taulukkobitit= %d\n" + +#: src/testgdbm.c:613 +#, c-format +msgid " block size = %d\n" +msgstr " lohkokoko = %d\n" + +#: src/testgdbm.c:614 +#, c-format +msgid " bucket elems = %d\n" +msgstr " säiliöelementit = %d\n" + +#: src/testgdbm.c:615 +#, c-format +msgid " bucket size = %d\n" +msgstr " säiliökoko = %d\n" + +#: src/testgdbm.c:616 +#, c-format +msgid " header magic = %x\n" +msgstr " otsakkeen maaginen luku = %x\n" + +#: src/testgdbm.c:617 +#, c-format +msgid " next block = %lu\n" +msgstr " seuraava lohko = %lu\n" + +#: src/testgdbm.c:619 +#, c-format +msgid " avail size = %d\n" +msgstr " käytettävissä oleva koko = %d\n" + +#: src/testgdbm.c:620 +#, c-format +msgid " avail count = %d\n" +msgstr " käytettävissä oleva lukumäärä = %d\n" + +#: src/testgdbm.c:621 +#, c-format +msgid " avail nx blk = %lu\n" +msgstr " käytettävissä oleva seuraava lohko = %lu\n" + +#: src/testgdbm.c:633 +#, c-format +msgid "hash value = %x. \n" +msgstr "tiivistearvo = %x. \n" + +#: src/testgdbm.c:689 +#, c-format +msgid "cannot fetch data (key %.*s)" +msgstr "ei voida noutaa tietoja (avain %.*s)" + +#: src/testgdbm.c:722 +#, c-format +msgid "gdbm_export failed, %s" +msgstr "gdbm_export epäonnistui, %s" + +#: src/testgdbm.c:735 +#, c-format +msgid "gdbm_import failed, %s" +msgstr "gdbm_import epäonnistui, %s" + +#: src/testgdbm.c:741 +msgid "yes" +msgstr "kyllä" + +#: src/testgdbm.c:741 +msgid "no" +msgstr "ei" + +#: src/testgdbm.c:749 +#, c-format +msgid "Database file: %s\n" +msgstr "Tietokantatiedosto: %s\n" + +#: src/testgdbm.c:750 src/testgdbm.c:760 +#, c-format +msgid "Zero terminated keys: %s\n" +msgstr "Nollapäätteiset avaimet: %s\n" + +#: src/testgdbm.c:751 +#, c-format +msgid "Zero terminated data: %s\n" +msgstr "Nollapäätteiset tiedot: %s\n" + +#: src/testgdbm.c:792 +msgid "count (number of entries)" +msgstr "lukumäärä (alkioiden lukumäärä)" + +#: src/testgdbm.c:795 src/testgdbm.c:801 src/testgdbm.c:813 src/testgdbm.c:845 +msgid "key" +msgstr "avain" + +#: src/testgdbm.c:795 +msgid "delete" +msgstr "poista" + +#: src/testgdbm.c:798 src/testgdbm.c:804 src/testgdbm.c:819 +msgid "file" +msgstr "tiedosto" + +#: src/testgdbm.c:798 +msgid "export" +msgstr "vie" + +#: src/testgdbm.c:801 +msgid "fetch" +msgstr "nouda" + +#: src/testgdbm.c:804 +msgid "import" +msgstr "tuo" + +#: src/testgdbm.c:807 +msgid "list" +msgstr "luettelo" + +#: src/testgdbm.c:810 +msgid "[key]" +msgstr "[avain]" + +#: src/testgdbm.c:810 +msgid "nextkey" +msgstr "seuraava-avain" + +#: src/testgdbm.c:813 +msgid "data" +msgstr "tiedot" + +#: src/testgdbm.c:813 +msgid "store" +msgstr "tallenna" + +#: src/testgdbm.c:816 +msgid "firstkey" +msgstr "ensimmäinen-avain" + +#: src/testgdbm.c:820 +msgid "read entries from file and store" +msgstr "lue rivejä tiedostosta ja tallenna" + +#: src/testgdbm.c:823 +msgid "reorganize" +msgstr "järjestä uudelleen" + +#: src/testgdbm.c:826 +msgid "toggle key nul-termination" +msgstr "vaihda päälle ja pois päältä nul-pääte" + +#: src/testgdbm.c:829 +msgid "print avail list" +msgstr "tulosta käytettävissä oleva luettelo" + +#: src/testgdbm.c:832 +msgid "bucket-number" +msgstr "säiliönumero" + +#: src/testgdbm.c:832 +msgid "print a bucket" +msgstr "tulosta säiliö" + +#: src/testgdbm.c:836 +msgid "print current bucket" +msgstr "tulosta nykyinen säiliö" + +#: src/testgdbm.c:839 +msgid "print hash directory" +msgstr "tulosta tiivistehakemisto" + +#: src/testgdbm.c:842 +msgid "print file header" +msgstr "tulosta tiedosto-otsake" + +#: src/testgdbm.c:845 +msgid "hash value of key" +msgstr "avaimen tiivistearvo" + +#: src/testgdbm.c:848 +msgid "print the bucket cache" +msgstr "tulosta säiliövälimuisti" + +#: src/testgdbm.c:851 +msgid "print current program status" +msgstr "tulosta nykyinen ohjelman tila" + +#: src/testgdbm.c:854 +msgid "print version of gdbm" +msgstr "tulosta gdbm-versio" + +#: src/testgdbm.c:857 +msgid "toggle data nul-termination" +msgstr "vaihtele päälle ja pois tietojen nul-päätettä" + +#: src/testgdbm.c:860 +msgid "print this help list" +msgstr "tulosta tämä opasteluettelo" + +#: src/testgdbm.c:863 +msgid "quit the program" +msgstr "poistu ohjelmasta" + +#: src/testgdbm.c:1063 +#, c-format +msgid "-s is incompatible with -r" +msgstr "-s on yhteensopimaton valitsimen -r kanssa" + +#: src/testgdbm.c:1070 +#, c-format +msgid "-r is incompatible with -n" +msgstr "-r on yhteensopimaton valitsimen -n kanssa" + +#: src/testgdbm.c:1077 +#, c-format +msgid "-n is incompatible with -r" +msgstr "-n on yhteensopimaton valitsimen -r kanssa" + +#: src/testgdbm.c:1099 +#, c-format +msgid "unknown option; try `%s -h' for more info\n" +msgstr "tuntematon valitsin; lisätietoja komennolla ”%s -h”\n" + +#: src/testgdbm.c:1123 +#, c-format +msgid "gdbm_open failed: %s" +msgstr "gdbm_open epäonnistui: %s" + +#: src/testgdbm.c:1127 +#, c-format +msgid "gdbm_setopt failed: %s" +msgstr "gdbm_setopt epäonnistui: %s" + +#: src/testgdbm.c:1133 +#, c-format +msgid "" +"\n" +"Welcome to the gdbm test program. Type ? for help.\n" +"\n" +msgstr "" +"\n" +"Tervetuloa gdbm-testausohjelmaan. Opastusta komennolla ?.\n" +"\n" + +#: src/testgdbm.c:1166 +#, c-format +msgid "Invalid command. Try ? for help." +msgstr "Virheellinen komento. Opastusta ?-komennolla." + +#: src/testgdbm.c:1167 +#, c-format +msgid "Unknown command" +msgstr "Tuntematon komento" + +#: src/testgdbm.c:1182 +#, fuzzy, c-format +msgid "%s: not enough arguments" +msgstr "%c: argumentteja ei ole kylliksi" + +#: src/testgdbm.c:1187 +#, c-format +msgid "unexpected eof" +msgstr "odottamaton tiedoston loppumerkki" + +#: src/testgdbm.c:1208 +#, c-format +msgid "cannot run pager `%s': %s" +msgstr "ei voida suorittaa sivuttajaa ”%s”: %s" + +#: src/update.c:110 +#, c-format +msgid "gdbm fatal: %s\n" +msgstr "kohtalokas gdbm-virhe: %s\n" + +#~ msgid "read error" +#~ msgstr "lukuvirhe" + +#~ msgid "write error" +#~ msgstr "kirjoitusvirhe" + +#~ msgid "nextkey on last key (from n, 1 or 2)" +#~ msgstr "seuraava-avain viimeisessä avaimessa (kohteesta n, 1 tai 2)" + +#~ msgid "Multicharacter commands are not yet implemented.\n" +#~ msgstr "Monimerkkikomentoja ei ole vielä toteutettu.\n" diff --git a/po/gdbm.pot b/po/gdbm.pot new file mode 100644 index 0000000..799641d --- /dev/null +++ b/po/gdbm.pot @@ -0,0 +1,667 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR Free Software Foundation, Inc. +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR , YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: gdbm 1.10\n" +"Report-Msgid-Bugs-To: bug-gdbm@gnu.org\n" +"POT-Creation-Date: 2011-11-13 11:47+0200\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME \n" +"Language-Team: LANGUAGE \n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" + +#: src/gdbmerrno.c:31 +msgid "No error" +msgstr "" + +#: src/gdbmerrno.c:32 +msgid "Malloc error" +msgstr "" + +#: src/gdbmerrno.c:33 +msgid "Block size error" +msgstr "" + +#: src/gdbmerrno.c:34 +msgid "File open error" +msgstr "" + +#: src/gdbmerrno.c:35 +msgid "File write error" +msgstr "" + +#: src/gdbmerrno.c:36 +msgid "File seek error" +msgstr "" + +#: src/gdbmerrno.c:37 +msgid "File read error" +msgstr "" + +#: src/gdbmerrno.c:38 +msgid "Bad magic number" +msgstr "" + +#: src/gdbmerrno.c:39 +msgid "Empty database" +msgstr "" + +#: src/gdbmerrno.c:40 +msgid "Can't be reader" +msgstr "" + +#: src/gdbmerrno.c:41 +msgid "Can't be writer" +msgstr "" + +#: src/gdbmerrno.c:42 +msgid "Reader can't delete" +msgstr "" + +#: src/gdbmerrno.c:43 +msgid "Reader can't store" +msgstr "" + +#: src/gdbmerrno.c:44 +msgid "Reader can't reorganize" +msgstr "" + +#: src/gdbmerrno.c:45 +msgid "Unknown update" +msgstr "" + +#: src/gdbmerrno.c:46 src/testgdbm.c:395 +#, c-format +msgid "Item not found" +msgstr "" + +#: src/gdbmerrno.c:47 +msgid "Reorganize failed" +msgstr "" + +#: src/gdbmerrno.c:48 +msgid "Cannot replace" +msgstr "" + +#: src/gdbmerrno.c:49 +msgid "Illegal data" +msgstr "" + +#: src/gdbmerrno.c:50 +msgid "Option already set" +msgstr "" + +#: src/gdbmerrno.c:51 +msgid "Illegal option" +msgstr "" + +#: src/gdbmerrno.c:52 +msgid "Byte-swapped file" +msgstr "" + +#: src/gdbmerrno.c:53 +msgid "Wrong file offset" +msgstr "" + +#: src/gdbmerrno.c:54 +msgid "Bad file flags" +msgstr "" + +#: src/gdbmerrno.c:55 +msgid "Cannot stat file" +msgstr "" + +#: src/gdbmerrno.c:56 +msgid "Unexpected end of file" +msgstr "" + +#: src/gdbmerrno.c:64 +msgid "Unknown error" +msgstr "" + +#: src/bucket.c:67 src/bucket.c:148 +msgid "couldn't init cache" +msgstr "" + +#: src/bucket.c:97 src/bucket.c:311 src/falloc.c:185 src/falloc.c:282 +#: src/findkey.c:64 src/update.c:36 src/update.c:82 +msgid "lseek error" +msgstr "" + +#: src/bucket.c:188 src/falloc.c:259 src/findkey.c:57 src/gdbmseq.c:73 +msgid "malloc error" +msgstr "" + +#: src/falloc.c:181 +msgid "malloc failed" +msgstr "" + +#: src/testgdbm.c:82 +#, c-format +msgid "" +"******* %s **********\n" +"\n" +"bits = %d\n" +"count= %d\n" +"Hash Table:\n" +msgstr "" + +#: src/testgdbm.c:85 +#, c-format +msgid " # hash value key size data size data adr home\n" +msgstr "" + +#: src/testgdbm.c:95 +#, c-format +msgid "" +"\n" +"Avail count = %1d\n" +msgstr "" + +#: src/testgdbm.c:96 +#, c-format +msgid "Avail adr size\n" +msgstr "" + +#: src/testgdbm.c:121 src/testgdbm.c:175 +#, c-format +msgid "Out of memory" +msgstr "" + +#: src/testgdbm.c:160 +#, c-format +msgid "" +"\n" +"header block\n" +"size = %d\n" +"count = %d\n" +msgstr "" + +#: src/testgdbm.c:196 +#, c-format +msgid "" +"\n" +"block = %d\n" +"size = %d\n" +"count = %d\n" +msgstr "" + +#: src/testgdbm.c:217 +#, c-format +msgid "" +"Bucket Cache (size %d):\n" +" Index: Address Changed Data_Hash \n" +msgstr "" + +#: src/testgdbm.c:225 +msgid "True" +msgstr "" + +#: src/testgdbm.c:225 +msgid "False" +msgstr "" + +#: src/testgdbm.c:230 +#, c-format +msgid "Bucket cache has not been initialized.\n" +msgstr "" + +#: src/testgdbm.c:236 +#, c-format +msgid "Usage: %s OPTIONS\n" +msgstr "" + +#: src/testgdbm.c:237 +#, c-format +msgid "Test and modify a GDBM database.\n" +msgstr "" + +#: src/testgdbm.c:239 +#, c-format +msgid "" +"OPTIONS are:\n" +"\n" +msgstr "" + +#: src/testgdbm.c:240 +#, c-format +msgid " -b SIZE set block size\n" +msgstr "" + +#: src/testgdbm.c:241 +#, c-format +msgid " -c SIZE set cache size\n" +msgstr "" + +#: src/testgdbm.c:242 +#, c-format +msgid " -g FILE operate on FILE instead of `junk.gdbm'\n" +msgstr "" + +#: src/testgdbm.c:243 +#, c-format +msgid " -h print this help summary\n" +msgstr "" + +#: src/testgdbm.c:244 +#, c-format +msgid " -l disable file locking\n" +msgstr "" + +#: src/testgdbm.c:245 +#, c-format +msgid " -m disable file mmap\n" +msgstr "" + +#: src/testgdbm.c:246 +#, c-format +msgid " -n create database\n" +msgstr "" + +#: src/testgdbm.c:247 +#, c-format +msgid " -r open database in read-only mode\n" +msgstr "" + +#: src/testgdbm.c:248 +#, c-format +msgid " -s synchronize to the disk after each write\n" +msgstr "" + +#: src/testgdbm.c:249 +#, c-format +msgid " -v print program version\n" +msgstr "" + +#: src/testgdbm.c:251 +#, c-format +msgid "Report bugs to <%s>.\n" +msgstr "" + +#: src/testgdbm.c:290 +#, c-format +msgid "cannot open file `%s' for reading: %s" +msgstr "" + +#: src/testgdbm.c:301 +#, c-format +msgid "%s:%d: line too long" +msgstr "" + +#: src/testgdbm.c:309 +#, c-format +msgid "%s:%d: malformed line" +msgstr "" + +#: src/testgdbm.c:320 +#, c-format +msgid "%d: item not inserted: %s" +msgstr "" + +#: src/testgdbm.c:379 +#, c-format +msgid "There is %d item in the database.\n" +msgid_plural "There are %d items in the database.\n" +msgstr[0] "" +msgstr[1] "" + +#: src/testgdbm.c:397 +#, c-format +msgid "Can't delete: %s" +msgstr "" + +#: src/testgdbm.c:416 src/testgdbm.c:450 src/testgdbm.c:475 +#, c-format +msgid "No such item found.\n" +msgstr "" + +#: src/testgdbm.c:431 +#, c-format +msgid "Item not inserted.\n" +msgstr "" + +#: src/testgdbm.c:487 +#, c-format +msgid "Reorganization failed.\n" +msgstr "" + +#: src/testgdbm.c:489 +#, c-format +msgid "Reorganization succeeded.\n" +msgstr "" + +#: src/testgdbm.c:521 +msgid "Current bucket" +msgstr "" + +#: src/testgdbm.c:522 +#, c-format +msgid "" +"\n" +" current directory entry = %d.\n" +msgstr "" + +#: src/testgdbm.c:524 +#, c-format +msgid " current bucket address = %lu.\n" +msgstr "" + +#: src/testgdbm.c:535 src/testgdbm.c:544 +#, c-format +msgid "not a number (stopped near %s)\n" +msgstr "" + +#: src/testgdbm.c:563 +#, c-format +msgid "Not a bucket.\n" +msgstr "" + +#: src/testgdbm.c:588 +#, c-format +msgid "Hash table directory.\n" +msgstr "" + +#: src/testgdbm.c:589 +#, c-format +msgid "" +" Size = %d. Bits = %d. \n" +"\n" +msgstr "" + +#: src/testgdbm.c:608 +#, c-format +msgid "" +"\n" +"File Header: \n" +"\n" +msgstr "" + +#: src/testgdbm.c:609 +#, c-format +msgid " table = %lu\n" +msgstr "" + +#: src/testgdbm.c:611 +#, c-format +msgid " table size = %d\n" +msgstr "" + +#: src/testgdbm.c:612 +#, c-format +msgid " table bits = %d\n" +msgstr "" + +#: src/testgdbm.c:613 +#, c-format +msgid " block size = %d\n" +msgstr "" + +#: src/testgdbm.c:614 +#, c-format +msgid " bucket elems = %d\n" +msgstr "" + +#: src/testgdbm.c:615 +#, c-format +msgid " bucket size = %d\n" +msgstr "" + +#: src/testgdbm.c:616 +#, c-format +msgid " header magic = %x\n" +msgstr "" + +#: src/testgdbm.c:617 +#, c-format +msgid " next block = %lu\n" +msgstr "" + +#: src/testgdbm.c:619 +#, c-format +msgid " avail size = %d\n" +msgstr "" + +#: src/testgdbm.c:620 +#, c-format +msgid " avail count = %d\n" +msgstr "" + +#: src/testgdbm.c:621 +#, c-format +msgid " avail nx blk = %lu\n" +msgstr "" + +#: src/testgdbm.c:633 +#, c-format +msgid "hash value = %x. \n" +msgstr "" + +#: src/testgdbm.c:689 +#, c-format +msgid "cannot fetch data (key %.*s)" +msgstr "" + +#: src/testgdbm.c:722 +#, c-format +msgid "gdbm_export failed, %s" +msgstr "" + +#: src/testgdbm.c:735 +#, c-format +msgid "gdbm_import failed, %s" +msgstr "" + +#: src/testgdbm.c:741 +msgid "yes" +msgstr "" + +#: src/testgdbm.c:741 +msgid "no" +msgstr "" + +#: src/testgdbm.c:749 +#, c-format +msgid "Database file: %s\n" +msgstr "" + +#: src/testgdbm.c:750 src/testgdbm.c:760 +#, c-format +msgid "Zero terminated keys: %s\n" +msgstr "" + +#: src/testgdbm.c:751 +#, c-format +msgid "Zero terminated data: %s\n" +msgstr "" + +#: src/testgdbm.c:792 +msgid "count (number of entries)" +msgstr "" + +#: src/testgdbm.c:795 src/testgdbm.c:801 src/testgdbm.c:813 src/testgdbm.c:845 +msgid "key" +msgstr "" + +#: src/testgdbm.c:795 +msgid "delete" +msgstr "" + +#: src/testgdbm.c:798 src/testgdbm.c:804 src/testgdbm.c:819 +msgid "file" +msgstr "" + +#: src/testgdbm.c:798 +msgid "export" +msgstr "" + +#: src/testgdbm.c:801 +msgid "fetch" +msgstr "" + +#: src/testgdbm.c:804 +msgid "import" +msgstr "" + +#: src/testgdbm.c:807 +msgid "list" +msgstr "" + +#: src/testgdbm.c:810 +msgid "[key]" +msgstr "" + +#: src/testgdbm.c:810 +msgid "nextkey" +msgstr "" + +#: src/testgdbm.c:813 +msgid "data" +msgstr "" + +#: src/testgdbm.c:813 +msgid "store" +msgstr "" + +#: src/testgdbm.c:816 +msgid "firstkey" +msgstr "" + +#: src/testgdbm.c:820 +msgid "read entries from file and store" +msgstr "" + +#: src/testgdbm.c:823 +msgid "reorganize" +msgstr "" + +#: src/testgdbm.c:826 +msgid "toggle key nul-termination" +msgstr "" + +#: src/testgdbm.c:829 +msgid "print avail list" +msgstr "" + +#: src/testgdbm.c:832 +msgid "bucket-number" +msgstr "" + +#: src/testgdbm.c:832 +msgid "print a bucket" +msgstr "" + +#: src/testgdbm.c:836 +msgid "print current bucket" +msgstr "" + +#: src/testgdbm.c:839 +msgid "print hash directory" +msgstr "" + +#: src/testgdbm.c:842 +msgid "print file header" +msgstr "" + +#: src/testgdbm.c:845 +msgid "hash value of key" +msgstr "" + +#: src/testgdbm.c:848 +msgid "print the bucket cache" +msgstr "" + +#: src/testgdbm.c:851 +msgid "print current program status" +msgstr "" + +#: src/testgdbm.c:854 +msgid "print version of gdbm" +msgstr "" + +#: src/testgdbm.c:857 +msgid "toggle data nul-termination" +msgstr "" + +#: src/testgdbm.c:860 +msgid "print this help list" +msgstr "" + +#: src/testgdbm.c:863 +msgid "quit the program" +msgstr "" + +#: src/testgdbm.c:1063 +#, c-format +msgid "-s is incompatible with -r" +msgstr "" + +#: src/testgdbm.c:1070 +#, c-format +msgid "-r is incompatible with -n" +msgstr "" + +#: src/testgdbm.c:1077 +#, c-format +msgid "-n is incompatible with -r" +msgstr "" + +#: src/testgdbm.c:1099 +#, c-format +msgid "unknown option; try `%s -h' for more info\n" +msgstr "" + +#: src/testgdbm.c:1123 +#, c-format +msgid "gdbm_open failed: %s" +msgstr "" + +#: src/testgdbm.c:1127 +#, c-format +msgid "gdbm_setopt failed: %s" +msgstr "" + +#: src/testgdbm.c:1133 +#, c-format +msgid "" +"\n" +"Welcome to the gdbm test program. Type ? for help.\n" +"\n" +msgstr "" + +#: src/testgdbm.c:1166 +#, c-format +msgid "Invalid command. Try ? for help." +msgstr "" + +#: src/testgdbm.c:1167 +#, c-format +msgid "Unknown command" +msgstr "" + +#: src/testgdbm.c:1182 +#, c-format +msgid "%s: not enough arguments" +msgstr "" + +#: src/testgdbm.c:1187 +#, c-format +msgid "unexpected eof" +msgstr "" + +#: src/testgdbm.c:1208 +#, c-format +msgid "cannot run pager `%s': %s" +msgstr "" + +#: src/update.c:110 +#, c-format +msgid "gdbm fatal: %s\n" +msgstr "" diff --git a/po/insert-header.sin b/po/insert-header.sin new file mode 100644 index 0000000..b26de01 --- /dev/null +++ b/po/insert-header.sin @@ -0,0 +1,23 @@ +# Sed script that inserts the file called HEADER before the header entry. +# +# At each occurrence of a line starting with "msgid ", we execute the following +# commands. At the first occurrence, insert the file. At the following +# occurrences, do nothing. The distinction between the first and the following +# occurrences is achieved by looking at the hold space. +/^msgid /{ +x +# Test if the hold space is empty. +s/m/m/ +ta +# Yes it was empty. First occurrence. Read the file. +r HEADER +# Output the file's contents by reading the next line. But don't lose the +# current line while doing this. +g +N +bb +:a +# The hold space was nonempty. Following occurrences. Do nothing. +x +:b +} diff --git a/po/ja.gmo b/po/ja.gmo new file mode 100644 index 0000000000000000000000000000000000000000..fec80ca171b5dd9e5d208ee0ade9d82dc0d6daeb GIT binary patch literal 11388 zcmbW5d5~Piea9P&4IYj-7R1ITrU5UKz_YBlSs@TBBv_0jj>Q~~gPwNY&W<$mW|>3M z5@Ty-1iDs;BNAF9kOV^LKnEpZKdsn`TV+j zX5Q?sz|O1b`M&P{_4T{^ee}gMHYlEzl#3``XDIa+IB*t!JPXcNN`oFa2`qzO05^iy zgRg^^f**lj2TwaksSfaRQ0gg%PlGp8KLp0XpMh6^UprT+$zUhg0zL*_2fhH_0{%64 zC3wzxc7Hd5=TmdPH&aJa|e35S0R3jIlkzjo~x{EnUP3Q*I3D|jKez_mXP z%DDC54d83wSHORE__4!DFh%y&3Np2t1qz?;bJz{uO1%Kec@KlX3w{VPh5D((UxED8 zd34G=7lTr7b@f}pFH)c9>K^!6>V2Thv&7+34mW}_ekb^Q;M*XqS08{f|385m{C8JB zo5@AaUjc=#6%U9{P+kI zIsXKdb$Btk(ugdj}}{dC=7Z5K>hEW&9wh!98FMd>@o^|2_Cs@Iz4K_c18z zPD03H$CrX~j=A90)0Dawyo&mNe%b25B`{mY-2?_;7kCZ$XAb`de1!Uy5VeC(fiu8A z1!sf5cI~s-gtRYrcpSWe`Y*xx;I$mO6I=n#0Y3nzfEWC}mG>>6*xy4SKegQ9%MOn^ z{73LI`acHQn!4y~mT%XC97)Y}*aLop`u9OO?;D`VX;xECO;KekGA6wvXz~MWf z$Y}@^{Xb3P6T!;8z7GoD&Y@HGG1KA0pzJdTik=OCSA$zYk?)T{InSu8 zpTp)vUYCO6r!NQTQr`rHF5~LYg00jKfimyEfwJy@f!_hogBaGUG$`j=1&SUW2E{IZ z=-U4dY@vP{i^)8b!8WiRl<|u}IrmD3J01QIgf(i&;TcRKcJXy^D>x0D4gL)%=l#;< z_FQ*?GVeT4)>{P1ex3kPU9}DrJ=g)tx&I23^?wR}7Ce_uvAap2$n_FX^zvSC8aM!o z9FBuB@6W+Az|&E-&w*z;JP(xlE&!$ftKeCn2F3481sSSlIP^hSrPhHQNxcaQzklrT zXQ0gg`Kk7tUjSv^^FfjGg`k}8Dp2%l4tOTm4W14z24{i+DEv79%KGnvuvq;96uEpE zqn3InDD?p3r?&DZ^nVG$D)noD6H$)y!xw=4)dl$d8 zkTQ=VGE7rM*0?(LASL>U&y?p$is-AzWF=)bumQteJO&R;7T*GAWM#>*X2>!smi>}V4v{1wkPN(!y#7Bvq z$%AT}+;at(pj<^+K#}KB3npjj=DmaR2xT#466ISI@k64+^31THG^(Vi|OuSF6RdYok->U?m{-#uc`4rL$@SaV=8vr5-*k3-Ps~Ev`tIUHYb(#^_{+# z@N?}tM#F=Cx;vZkbs?(@y}nK+7G`w8&lhxGE}P7GnO3d4`ulu+tM19>bg!T8Yn5RO z)7kFDW~Ep@^|-I?Yke(Qs@JTd4dtnbv^Zz^v%r}M>3#>@2^>hw73L@Mts zL_9qrBjIluJ(RJs1*}QOYp_jL3gmYsa&KT5bbSlt{O2o54x?g9q z2|Fr3W{lSP{-C=zmkmVxPJ1}PV(s-5{G9e-tX`T+73}aO$==1tX%d!gNi zmq_INJcG-On2HA)l}-hCjy|uDl7lWy6?%0%r{cL&bOkET zkW-AZu1XuThB3m5nCigHj4kw}y=2~0E#re?W}%-`9mWS4w)weSmIlkKS;nTPn2wgj z)b^Oxok7B1)~@w!H8#%b^@1d9(6?h6kD9}=pdD|00uIUWcA<}Pq=Hl-<)zt{c-D^o zf*;Q>_4@jlL3XHSdBJ3Kz&Dn|*6MX*0kwJp4J-IYNDzqNa(-Xh>o()1nlE?-H=*c3x#hP`bp7;I5(Yo2AYcQO!`dAMu zoVYWc_LE-PELX2&`wEz>>I`t(sRV%rM-*VRUBsYBxKN!nHSHl3B^uS5)-wNGFO4wW z9_D2mFZm*F#OS#h4Cy@hYP9Ce(mK@OsZy2+Dpr!2_b$#%`X~sb4gFUT624z2rEsl7qurO^blc9OAr}G>WSozhmk_Tz}HqXSSzD82yN! zBZ=^HnN+}-gxQwW)v-N9_q^@-Hm~1NR+@2V*T_bUp~o*EdpVn)BI!U&>lOK_%5@qY zH_l-}OMbG+O+?~EOk-Y-Dpw42A3M)!p|U;MVmcwlDkhB@5dM`-Tc+6MMOP$`O8KlN zt1G7^{xXr8GTTzd>U&bTe1WYglQs1~o3^Kt`lFWK$^0AGtRZ_el`+D%s?cb*2QvC$ z_GzYos~DM^!ZhQRYH1Q~c^OerMVi>UY{xF4~A5*lbp`{mn7VQPmo2kzagXG4DE!L~W3DE#`D} zSL7N+>8;K<364#)BAalTg@{#nsvavMcbUL#Kw0-_C9ZpN*^E_cu|#Y05szRS3fW|m zkY`jgD5m2zofmKD`rsq%Ywjw-;65^SOvBIiD3V8GfYyyp*OI!UraInh^%-}Cu?Icb znCkcQ>YiM75rgBMiTJl{vea&~^=Yj)wcgYgvrZ*GH=j%;;vKk_cvrSvd`w)9Ju?{; zTX9{nd**k=XK`e4U-8?q({_Dz+q7wM`CX%@O>4jQhAZ2yZfk=uexJW2C0SV$U0eKW z=&otM?)od+Zi4P^FJFjv<-8!D_HdEy`e83$^cJUd7fv*Z`%dYb`)yNUW-^0@w-PCC zVO)?bVw>?U-^;Y?ySzRx@QH9Y7u;O3FsXJXzQ~&?^31p9v&CGuPXd$lTLZt)n4?`U z@?vv4=gw}hW?E}oY*scXV9Ig1z_jC;mKCld+@^x*y1UoQVO%pF=$aG1u|X#*_xQQ^ zY%&|`OKv0=irteg=Dc)#4w(~fE9f)T{ETVSwSAq@Hl6#99$A09x@A{b+8%g~ zVOZHH3$TIm0kiQ~Sbj@3Rz6b8US;FOk23`>JB$_yQU zWi*>XvT#K9_=%&(-z6g#Mzmz;y;sBX`mnqP!P&bddl-Ix-O#Zukv)vRR2uQ3WAIsI zJG!$pa(IPofBUYH9Y-QV$KNo+Ce?D1W$4I??bS8!iUKtbKmO9$G`h53%e_;dV)Xc{ zXhUq3K_kC+8Om9QS3MJ1b^PUYbkDx9bfUU`Bb=%pEMqcZaIaV^?x zL^%H1I=uOvu(WRU_)(el_yC654O z%$0fUrW?D4VaDw3U;QvNH~1udwR1>E{cw?vh%;^+B`l*ktBqrR*Dh&Xv0Rs}dq!fz z11E5cqFSYOVd;2S+8mbgr&RHhTTK$?ZrG#S(Vl_o4of*0mYz2BgUa;}y|Zq3->ZnI zdhC_zQM~JZGXnC#Q{B89XEf)lGd=1UIkCNhiyP;8|>*6_@FN_{JsnfV4Vau_LW(0m1GQiJM_)x(<)8+D5~lSUkhebO=_|5Y#H zD5?V+C3Ke22qNi&;V0M1g2!Lb zDr&%CB10y$D9%=k#&x$I5w%AwY7=HQ{B+VhX^KgiWvNUFi#(*eAL+ZxgOpwJHjtm;FQ8(}U*;J#cOv*>vMUo(a zK-B^)ay%4Ph&BA1@I}1+)I5zSvKtk#N!p3=shV=Wt27` z>(|VQ+;uR*ks9~dKO0bzR+8SjEOSq7?gL?|Z1R}etaYV#A;fTPVyb3F$tRq!xe0G1 zQCKu_FTQQ$`0ge{E3ZX~h=4eD&O0#r1ETJly7@)T=s>f9816)@Y+!WHy3u``np8g0 zePHOsOVx4RcEsN5jyH!lARm6PK;neqXKlv4=NbG}?C#y@Q}@nfl0y_eOUeg5u=HS8T#!9L_;F_gh@1#;h>*I-tzQ zsJg0$b!(UFPVGWcT4QwM(9ntf68R+k!G~CHXpLr~3Gi=V$FmP_Jg96cG<;}-_@l-rtW$<4(Ln6vz0l-kstu*64jiej!Xd0S zo|uT{+@AGt6H%CZi|wB1D_4C6*km1VP4%1=NeCmR9d#eRqOQ_>&ce4nXWgMqjwLe| z9Y8alts8)>k7~VGOG}B6N9&`j`?uCIl18dyN65;JXewK5gt?~V!faYpRY|fk#mbP^ z-|pMl=*q*@XOE4%xWe))8To!DdO4AK$-xYr`=Iuzbmj}&gjD9pW-j-^?bKA!L`-g| zlF%Akch^+0hDH>D;uIg_>OR)+Z%~bOy~MuY=*NWd@CPvw8|DFAf@~B%bm0 zYH7>xJ{(2E8Sz1{IhAUy-^b;2xE!HUz+N}Y!WhlKqGE9 zJ}!(|I?8l0tTMXW^z~)@tfx#J$C1kCl*WDgl*bnZg3+IH353(lw?-WPTjil6B!=?c zf$qq0O(1t}v1aTx_o+oAGiKZe%7$+#4d{6f+, 2011. +# +msgid "" +msgstr "" +"Project-Id-Version: gdbm 1.9.90\n" +"Report-Msgid-Bugs-To: bug-gdbm@gnu.org\n" +"POT-Creation-Date: 2011-11-13 11:47+0200\n" +"PO-Revision-Date: 2011-10-23 13:56+0900\n" +"Last-Translator: Yasuaki Taniguchi \n" +"Language-Team: Japanese \n" +"Language: ja\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +#: src/gdbmerrno.c:31 +msgid "No error" +msgstr "エラー無し" + +#: src/gdbmerrno.c:32 +msgid "Malloc error" +msgstr "malloc エラー" + +#: src/gdbmerrno.c:33 +msgid "Block size error" +msgstr "ブロックサイズ・エラー" + +#: src/gdbmerrno.c:34 +msgid "File open error" +msgstr "ファイルを開く時のエラー" + +#: src/gdbmerrno.c:35 +msgid "File write error" +msgstr "ファイル書き込みエラー" + +#: src/gdbmerrno.c:36 +msgid "File seek error" +msgstr "ファイル探索 (seek) エラー" + +#: src/gdbmerrno.c:37 +msgid "File read error" +msgstr "ファイル読み込みエラー" + +#: src/gdbmerrno.c:38 +msgid "Bad magic number" +msgstr "間違ったマジック番号" + +#: src/gdbmerrno.c:39 +msgid "Empty database" +msgstr "空データベース" + +#: src/gdbmerrno.c:40 +msgid "Can't be reader" +msgstr "読取器になれない" + +#: src/gdbmerrno.c:41 +msgid "Can't be writer" +msgstr "書込器になれない" + +#: src/gdbmerrno.c:42 +msgid "Reader can't delete" +msgstr "読取器は削除できない" + +#: src/gdbmerrno.c:43 +msgid "Reader can't store" +msgstr "読取器は保存できない" + +#: src/gdbmerrno.c:44 +msgid "Reader can't reorganize" +msgstr "読取器が認識できない" + +#: src/gdbmerrno.c:45 +msgid "Unknown update" +msgstr "不明な更新" + +#: src/gdbmerrno.c:46 src/testgdbm.c:395 +#, c-format +msgid "Item not found" +msgstr "項目が見つからない" + +#: src/gdbmerrno.c:47 +msgid "Reorganize failed" +msgstr "認識失敗" + +#: src/gdbmerrno.c:48 +msgid "Cannot replace" +msgstr "置換できない" + +#: src/gdbmerrno.c:49 +msgid "Illegal data" +msgstr "不正なデータ" + +#: src/gdbmerrno.c:50 +msgid "Option already set" +msgstr "オプションはすでに定義されている" + +#: src/gdbmerrno.c:51 +msgid "Illegal option" +msgstr "不正なオプション" + +#: src/gdbmerrno.c:52 +msgid "Byte-swapped file" +msgstr "バイト順が入れ替わっているファイル" + +#: src/gdbmerrno.c:53 +msgid "Wrong file offset" +msgstr "間違ったファイルオフセット" + +#: src/gdbmerrno.c:54 +msgid "Bad file flags" +msgstr "間違ったファイルフラグ" + +#: src/gdbmerrno.c:55 +msgid "Cannot stat file" +msgstr "ファイルの状態取得 (stat) ができない" + +#: src/gdbmerrno.c:56 +#, fuzzy +msgid "Unexpected end of file" +msgstr "予期しないファイル終端 (EOF) です" + +#: src/gdbmerrno.c:64 +msgid "Unknown error" +msgstr "不明なエラー" + +#: src/bucket.c:67 src/bucket.c:148 +msgid "couldn't init cache" +msgstr "キャッシュを初期化できませんでした" + +#: src/bucket.c:97 src/bucket.c:311 src/falloc.c:185 src/falloc.c:282 +#: src/findkey.c:64 src/update.c:36 src/update.c:82 +msgid "lseek error" +msgstr "lseek エラーです" + +#: src/bucket.c:188 src/falloc.c:259 src/findkey.c:57 src/gdbmseq.c:73 +msgid "malloc error" +msgstr "malloc エラーです" + +#: src/falloc.c:181 +msgid "malloc failed" +msgstr "malloc に失敗しました" + +#: src/testgdbm.c:82 +#, c-format +msgid "" +"******* %s **********\n" +"\n" +"bits = %d\n" +"count= %d\n" +"Hash Table:\n" +msgstr "" +"******* %s **********\n" +"\n" +"ビット = %d\n" +"数 = %d\n" +"ハッシュ表:\n" + +#: src/testgdbm.c:85 +#, c-format +msgid " # hash value key size data size data adr home\n" +msgstr " # ハッシュ値 キーサイズ データサイズ データadr ホーム\n" + +#: src/testgdbm.c:95 +#, c-format +msgid "" +"\n" +"Avail count = %1d\n" +msgstr "" +"\n" +"利用可能数 = %1d\n" + +#: src/testgdbm.c:96 +#, c-format +msgid "Avail adr size\n" +msgstr "利用可 adr サイズ\n" + +#: src/testgdbm.c:121 src/testgdbm.c:175 +#, c-format +msgid "Out of memory" +msgstr "メモリが足りません" + +#: src/testgdbm.c:160 +#, c-format +msgid "" +"\n" +"header block\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"ヘッダブロック\n" +"サイズ = %d\n" +"数 = %d\n" + +#: src/testgdbm.c:196 +#, c-format +msgid "" +"\n" +"block = %d\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"ブロック = %d\n" +"サイズ = %d\n" +"数 = %d\n" + +#: src/testgdbm.c:217 +#, c-format +msgid "" +"Bucket Cache (size %d):\n" +" Index: Address Changed Data_Hash \n" +msgstr "" +"バケットキャッシュ (サイズ %d):\n" +" 索引 : アドレス 変更 データハッシュ\n" + +#: src/testgdbm.c:225 +msgid "True" +msgstr "真" + +#: src/testgdbm.c:225 +msgid "False" +msgstr "偽" + +#: src/testgdbm.c:230 +#, c-format +msgid "Bucket cache has not been initialized.\n" +msgstr "バケットキャッシュが初期化されていません。\n" + +#: src/testgdbm.c:236 +#, c-format +msgid "Usage: %s OPTIONS\n" +msgstr "使用法: %s OPTIONS\n" + +#: src/testgdbm.c:237 +#, c-format +msgid "Test and modify a GDBM database.\n" +msgstr "GDBM データベースのテストおよび修正を行います。\n" + +#: src/testgdbm.c:239 +#, c-format +msgid "" +"OPTIONS are:\n" +"\n" +msgstr "" +"オプション:\n" +"\n" + +#: src/testgdbm.c:240 +#, c-format +msgid " -b SIZE set block size\n" +msgstr " -b SIZE ブロックサイズを設定する\n" + +#: src/testgdbm.c:241 +#, c-format +msgid " -c SIZE set cache size\n" +msgstr " -c SIZE キャッシュサイズを設定する\n" + +#: src/testgdbm.c:242 +#, c-format +msgid " -g FILE operate on FILE instead of `junk.gdbm'\n" +msgstr " -g FILE `junk.gdbm'の代わりに FILE を操作する\n" + +#: src/testgdbm.c:243 +#, c-format +msgid " -h print this help summary\n" +msgstr " -h このヘルプ要約を表示する\n" + +#: src/testgdbm.c:244 +#, c-format +msgid " -l disable file locking\n" +msgstr " -l ファイルロックを無効にする\n" + +#: src/testgdbm.c:245 +#, c-format +msgid " -m disable file mmap\n" +msgstr " -m ファイルの mmap を無効にする\n" + +#: src/testgdbm.c:246 +#, c-format +msgid " -n create database\n" +msgstr " -n データベースを作成する\n" + +#: src/testgdbm.c:247 +#, c-format +msgid " -r open database in read-only mode\n" +msgstr " -r 読み取り専用モードでデータベースを開く\n" + +#: src/testgdbm.c:248 +#, c-format +msgid " -s synchronize to the disk after each write\n" +msgstr " -s 書き込み後に毎回ディスクを同期する\n" + +#: src/testgdbm.c:249 +#, c-format +msgid " -v print program version\n" +msgstr " -v プログラムのバージョンを表示する\n" + +#: src/testgdbm.c:251 +#, c-format +msgid "Report bugs to <%s>.\n" +msgstr "" +"バグを発見したら <%s> に報告して下さい。\n" +"翻訳に関するバグはに報告してくださ" +"い。\n" + +#: src/testgdbm.c:290 +#, c-format +msgid "cannot open file `%s' for reading: %s" +msgstr "ファイル `%s' を読み取り用に開けません: %s" + +#: src/testgdbm.c:301 +#, c-format +msgid "%s:%d: line too long" +msgstr "%s:%d: 行が大きすぎます" + +#: src/testgdbm.c:309 +#, c-format +msgid "%s:%d: malformed line" +msgstr "%s:%d: 不正な形式の行です" + +#: src/testgdbm.c:320 +#, c-format +msgid "%d: item not inserted: %s" +msgstr "%d: 項目を挿入できませんでした: %s" + +#: src/testgdbm.c:379 +#, c-format +msgid "There is %d item in the database.\n" +msgid_plural "There are %d items in the database.\n" +msgstr[0] "データベースには %d 項目あります。\n" + +#: src/testgdbm.c:397 +#, c-format +msgid "Can't delete: %s" +msgstr "削除できません: %s" + +#: src/testgdbm.c:416 src/testgdbm.c:450 src/testgdbm.c:475 +#, c-format +msgid "No such item found.\n" +msgstr "そのような項目はありません。\n" + +#: src/testgdbm.c:431 +#, c-format +msgid "Item not inserted.\n" +msgstr "項目が挿入されませんでした。\n" + +#: src/testgdbm.c:487 +#, c-format +msgid "Reorganization failed.\n" +msgstr "認識に失敗しました。\n" + +#: src/testgdbm.c:489 +#, c-format +msgid "Reorganization succeeded.\n" +msgstr "認識に成功しました。\n" + +#: src/testgdbm.c:521 +msgid "Current bucket" +msgstr "現在のバケット" + +#: src/testgdbm.c:522 +#, c-format +msgid "" +"\n" +" current directory entry = %d.\n" +msgstr "" +"\n" +" 現在のディレクトリー項目 = %d。\n" + +#: src/testgdbm.c:524 +#, c-format +msgid " current bucket address = %lu.\n" +msgstr " 現在のバケットアドレス = %lu。\n" + +#: src/testgdbm.c:535 src/testgdbm.c:544 +#, c-format +msgid "not a number (stopped near %s)\n" +msgstr "数値ではありません (%s あたりで停止しました)\n" + +#: src/testgdbm.c:563 +#, c-format +msgid "Not a bucket.\n" +msgstr "バケットではありません。\n" + +#: src/testgdbm.c:588 +#, c-format +msgid "Hash table directory.\n" +msgstr "ハッシュ表ディレクトリーです。\n" + +#: src/testgdbm.c:589 +#, c-format +msgid "" +" Size = %d. Bits = %d. \n" +"\n" +msgstr "" +" サイズ = %d。 ビット = %d。\n" +"\n" + +#: src/testgdbm.c:608 +#, c-format +msgid "" +"\n" +"File Header: \n" +"\n" +msgstr "" +"\n" +"ファイルヘッダ: \n" +"\n" + +#: src/testgdbm.c:609 +#, c-format +msgid " table = %lu\n" +msgstr " 表 = %lu\n" + +#: src/testgdbm.c:611 +#, c-format +msgid " table size = %d\n" +msgstr " 表サイズ = %d\n" + +#: src/testgdbm.c:612 +#, c-format +msgid " table bits = %d\n" +msgstr " 表ビット = %d\n" + +#: src/testgdbm.c:613 +#, c-format +msgid " block size = %d\n" +msgstr " ブロックサイズ = %d\n" + +#: src/testgdbm.c:614 +#, c-format +msgid " bucket elems = %d\n" +msgstr " バケット要素数 = %d\n" + +#: src/testgdbm.c:615 +#, c-format +msgid " bucket size = %d\n" +msgstr " バケットサイズ = %d\n" + +#: src/testgdbm.c:616 +#, c-format +msgid " header magic = %x\n" +msgstr " ヘッダマジック番号 = %x\n" + +#: src/testgdbm.c:617 +#, c-format +msgid " next block = %lu\n" +msgstr " 次ブロック = %lu\n" + +#: src/testgdbm.c:619 +#, c-format +msgid " avail size = %d\n" +msgstr " 使用可能サイズ = %d\n" + +#: src/testgdbm.c:620 +#, c-format +msgid " avail count = %d\n" +msgstr " 使用可能数 = %d\n" + +#: src/testgdbm.c:621 +#, c-format +msgid " avail nx blk = %lu\n" +msgstr " 使用可能な次ブロック = %lu\n" + +#: src/testgdbm.c:633 +#, c-format +msgid "hash value = %x. \n" +msgstr "ハッシュ値 = %x。\n" + +#: src/testgdbm.c:689 +#, c-format +msgid "cannot fetch data (key %.*s)" +msgstr "データを取得できません (キー %.*s)" + +#: src/testgdbm.c:722 +#, c-format +msgid "gdbm_export failed, %s" +msgstr "gdbm_export に失敗しました。 %s" + +#: src/testgdbm.c:735 +#, c-format +msgid "gdbm_import failed, %s" +msgstr "gdbm_import に失敗しました。 %s" + +#: src/testgdbm.c:741 +msgid "yes" +msgstr "yes" + +#: src/testgdbm.c:741 +msgid "no" +msgstr "no" + +#: src/testgdbm.c:749 +#, c-format +msgid "Database file: %s\n" +msgstr "データベースファイル: %s\n" + +#: src/testgdbm.c:750 src/testgdbm.c:760 +#, c-format +msgid "Zero terminated keys: %s\n" +msgstr "0で区切られたキー: %s\n" + +#: src/testgdbm.c:751 +#, c-format +msgid "Zero terminated data: %s\n" +msgstr "0で区切られたデータ: %s\n" + +#: src/testgdbm.c:792 +msgid "count (number of entries)" +msgstr "数 (項目数)" + +#: src/testgdbm.c:795 src/testgdbm.c:801 src/testgdbm.c:813 src/testgdbm.c:845 +msgid "key" +msgstr "key" + +#: src/testgdbm.c:795 +msgid "delete" +msgstr "delete" + +#: src/testgdbm.c:798 src/testgdbm.c:804 src/testgdbm.c:819 +msgid "file" +msgstr "file" + +#: src/testgdbm.c:798 +msgid "export" +msgstr "export" + +#: src/testgdbm.c:801 +msgid "fetch" +msgstr "fetch" + +#: src/testgdbm.c:804 +msgid "import" +msgstr "import" + +#: src/testgdbm.c:807 +msgid "list" +msgstr "list" + +#: src/testgdbm.c:810 +msgid "[key]" +msgstr "[key]" + +#: src/testgdbm.c:810 +msgid "nextkey" +msgstr "nextkey" + +#: src/testgdbm.c:813 +msgid "data" +msgstr "data" + +#: src/testgdbm.c:813 +msgid "store" +msgstr "store" + +#: src/testgdbm.c:816 +msgid "firstkey" +msgstr "firstkey" + +#: src/testgdbm.c:820 +msgid "read entries from file and store" +msgstr "ファイルから項目を読み込み保存する" + +#: src/testgdbm.c:823 +msgid "reorganize" +msgstr "reorganize" + +#: src/testgdbm.c:826 +msgid "toggle key nul-termination" +msgstr "NULL 区切りであるかどうかを切り替える" + +#: src/testgdbm.c:829 +msgid "print avail list" +msgstr "使用可能なリストを表示する" + +#: src/testgdbm.c:832 +msgid "bucket-number" +msgstr "bucket-number" + +#: src/testgdbm.c:832 +msgid "print a bucket" +msgstr "バケットを表示する" + +#: src/testgdbm.c:836 +msgid "print current bucket" +msgstr "現在のバケットを表示する" + +#: src/testgdbm.c:839 +msgid "print hash directory" +msgstr "ハッシュディレクトリーを表示する" + +#: src/testgdbm.c:842 +msgid "print file header" +msgstr "ファイルヘッダを表示する" + +#: src/testgdbm.c:845 +msgid "hash value of key" +msgstr "キーのハッシュ値" + +#: src/testgdbm.c:848 +msgid "print the bucket cache" +msgstr "バケットキャッシュを表示する" + +#: src/testgdbm.c:851 +msgid "print current program status" +msgstr "プログラムの現在の状態を表示する" + +#: src/testgdbm.c:854 +msgid "print version of gdbm" +msgstr "gdbm のバージョンを表示する" + +#: src/testgdbm.c:857 +msgid "toggle data nul-termination" +msgstr "データが NULL 区切りであるかどうかを切り替える" + +#: src/testgdbm.c:860 +msgid "print this help list" +msgstr "このヘルプリストを表示する" + +#: src/testgdbm.c:863 +msgid "quit the program" +msgstr "プログラムを終了する" + +#: src/testgdbm.c:1063 +#, c-format +msgid "-s is incompatible with -r" +msgstr "-s は -r と同時に指定できません" + +#: src/testgdbm.c:1070 +#, c-format +msgid "-r is incompatible with -n" +msgstr "-r と -n は同時に指定できません" + +#: src/testgdbm.c:1077 +#, c-format +msgid "-n is incompatible with -r" +msgstr "-n は -r と同時に指定できません" + +#: src/testgdbm.c:1099 +#, c-format +msgid "unknown option; try `%s -h' for more info\n" +msgstr "不明なオプションです。詳細は `%s -h' を参照してください。\n" + +#: src/testgdbm.c:1123 +#, c-format +msgid "gdbm_open failed: %s" +msgstr "gdbm_open に失敗しました: %s" + +#: src/testgdbm.c:1127 +#, c-format +msgid "gdbm_setopt failed: %s" +msgstr "gdbm_setopt に失敗しました: %s" + +#: src/testgdbm.c:1133 +#, c-format +msgid "" +"\n" +"Welcome to the gdbm test program. Type ? for help.\n" +"\n" +msgstr "" +"\n" +"gdbm テストプログラムにようこそ。ヘルプを見る場合は ? と入力してください。\n" +"\n" + +#: src/testgdbm.c:1166 +#, c-format +msgid "Invalid command. Try ? for help." +msgstr "無効なコマンドです。ヘルプを見る場合は ? を試してみてください。" + +#: src/testgdbm.c:1167 +#, c-format +msgid "Unknown command" +msgstr "不明なコマンドです" + +#: src/testgdbm.c:1182 +#, fuzzy, c-format +msgid "%s: not enough arguments" +msgstr "%c: 十分な引数がありません" + +#: src/testgdbm.c:1187 +#, c-format +msgid "unexpected eof" +msgstr "予期しないファイル終端 (EOF) です" + +#: src/testgdbm.c:1208 +#, c-format +msgid "cannot run pager `%s': %s" +msgstr "ページャー `%s' を実行できません: %s" + +#: src/update.c:110 +#, c-format +msgid "gdbm fatal: %s\n" +msgstr "gdbm 致命的: %s\n" + +#~ msgid "read error" +#~ msgstr "読み込みエラーです" + +#~ msgid "write error" +#~ msgstr "書き込みエラーです" + +#~ msgid "Multicharacter commands are not yet implemented.\n" +#~ msgstr "複数文字のコマンドはまだ実装されていません。\n" diff --git a/po/pl.gmo b/po/pl.gmo new file mode 100644 index 0000000000000000000000000000000000000000..65c698d84a0713d3a0b4f1d23b266565ea3fe39c GIT binary patch literal 10293 zcma)=3ydU3dB@Ax1~a@8{D?ycE->pm+st_PZ18#S&OYxwd~4r}^V)}Bx$B+jo$Z~O z?s0d|?ajp41jzk}C-?|O?do4{Fc0(=;J zKlo|zR`3PzdhpF}_3~{6FQa@9csaNf${z{%$$*~^__cuF0>%F?0slADU;Z{f-gTg* z{WkEI!Q-KR0IJ_7z?;F(f$soc3i#82m!cHORRbB?>;k2yBLVB+ZInw;>-`e=i{SS_ zhA=-4_%o27c`J#ThDR)7Qb0Xjq0Y3$*|DS+YfL{Soy?GJT z_}>LB_-ZJ>iNR&(cYxxnfpUdypw_n=RKNQIE`t2bGJlxL{3fXWPlCS$egWiX&W7?o zfYRT;flO&CFiXGh1m6vA0q+3kKwQ!MKB#s55vcLM2x|VXfg1NkP~&_bl-+(3@GS@{ zy=(&2uL{b)w}JAr4}s!;6r_uJGL*jnYTmyAUk^SX@b5s4_npxG3Mjq&6Daw91WLdE z6Yw$?#jCj8IVvi9|NWTCqc>oIq(hOGvMpMzXGoU zzY0npFN3o4k3h})Gf?Zjl*u*UB&hlsQ1ToNQi zfDyPA{9SMd_zkcIUV;!ef;WR|Z-MUvKMRWQo1o(CZ7g2n90K13J_c(2e+WvBXF~aJ z1HK&Ue-iMGzv}s~0>yt*z&isT5A7$wt7-o&ke~T;{;mXH05$IqK;^@WDWEd5FW|9& zCqRw=aZvL8F{u835$eAQ?xXxePNep!}f*%3eD`_1g_<{s%#(G7p1_i{AlRg83|{e$Rm#?_1y`_(M?ruVgaeBq)E~ z2g-l%1tnh{lw2PM<=?*tYQE2a;{Ote>dkYY^!W;i=;lHetMy*ZpXAyLS}+FXcTa#- z@QYv!z5;4pdl*D=&Vq{12SMq-4Qk%ULCNzZsCoYk)cDVXinCWi`S*W-*MJwi*ZbdQ z@Mg+KL7L1bKTF9Lr6YTSPXacT2kAR?Q~Cp>NiE#(J7 z`4Lch{R}AizXB?6ya-+lemmfILFxPZp!E4;PfMO+A812Uz#4wQZlf%2ny zQ0sp*wEqDp`JMyik1v7pgZ~WW%QkuaRRit0&+|@T;K4{bx}A zqa+}?roaop2O#AE`MTm=GU-unQrzpAh3;~1-ge>D>HQH3vd7%8GT`)BS?g#*Ii$5e z3`qvX*@vMFdIR)&NRRwQ&vxi`_vZiZ03L%rI97Lv_dawY)H&Vr{zNDX7Q(yyXdXHU zT?Dlu>00_Z3XMN$D4Yi04M}%rpgqtn&@Sj|NY6*0El>}79VCB~O+EzO2g%=Lo88bN zbT{-kq&zx+^gQapMBw4@z7s5< zQVf^SP0(*Z`=Rwu5-K)Q6tW$ZH0=Xal4*%Vq0dmT#RkA zG2gLeT$Hw(XU#n7)U2KBcVl~-UC45~7`MAMb(?Qz^_H8dQY3@e`q$B1nrhL_VjbtX zn5>?w^|u%mi}pm+?lBfmEACrAu(ge-j79}tiW)gxkh@~6tcH4?WBsijw=nx*Z&?PLw#t60~^+M=J<7xOHY`Gfbcf|iXI$~d<%inYsm zQu^*EHgxy830`JT#Cefqsg`lK2Haug#MaIvW#N3QCU3Pi8uMxIbEC@iBqn!0+3u~f z1}9QXsM7oG`pRCtg~P<{xZ@{toW9bt4!Z}R?nKR`uIW#TGmTFUz0JjepB{~4#_+&8 zUOTTa7C~9wAY!Bb2H;|kW*Wn z=NT1VSG!zHZ*~n6jccbX*3PDl_~f*;w-430YcWcjsKM?gG>*B&F`@78a{>v;>2^LQ zIFd9elc>>xzMr9WP!*T-;D`RIQ7-YCS?zW@4 z>#t%_Mr9Z<?2Xz*Y+QPG;p{cy%8F(?RxaYWHC}cy zh6<+%?~kKxg%!`X+i^2$yXi)StXmSYW;P{lCk-|l5>ZOf&anrLZ5L*C=%x#7MUBPyihjW|DdonbwQo+9h@Lh;byx!FSp@3v8nV^VZ7*{H2WvxUT^ zIn*natvhjtEz%sJp7d0A2J;44TbIXK-i(yh*47v7u&N5JxIJ6K0z0g8iFNgeU613& z+9s^$*cqgo<+w|)StxUEpD1o+C3D(!QJ`{eve0LdckG@yFtV^X7UMit3{5n=PDs_- zw1??^#1g?4coc9OnDSn1?nzr|www;lHY$5Z8MgMi3=VS^A z(CB>JC5Ph^#U^()k;U0DU3dkqyqDT8lIK=jz9s9m8wys1G;YB5Z~U=kv!7nRqH|Od zGn-~N!As(kvYK&X85i{nNnVtQX56W10p7M>mCDCFf3W%ch*`&WEa^DodskSk_6u_U z;pB8fpjCn_4B@KDO2cCkY563(q8Y0~bcy4qFnVn#MQO+kqljk*SdFw$2yUr;OnuUf zpMoqXWHYYsQe7HHIqSH#V*KVk48vj3?agjR-@bMa3tYp>;m)s|*DFG!v#8%>LycSA zC>4cDIlcFpV8QhVtuZ0O$wFq8PR+wT?5+WV0LG_BZ*jYjXC3dPI#*{K)qDM6Y1*IGr)sy%chlMs#^BWX4Zke2#s_J*6otm1y>E`Pvw@gmLSUnP-NOUS2=bPMG-7;k- zZ=RmK(ev$(in2PFM`_WHNRiX_&ZyO!w=-F@R}Ad-hv&1bSlrodH>#XSdM72st(E=k zzC8l7Iu}QsX?r-sV2gHp8HUlEoU%LBZhNOpS=5TGm)B#?F3q@>#^ve=)3)2L9GE?@ zXH_dxwaLn^EG>!Rs_rh+B&Cz(4eYc@y3N)Xqnxef|0&Abrj)jb?)d>Yxx zF{pC5-OHnPbuWh|GFIAk#bU>e+n81@JJKCHrr7N!Ev*w%leg~JVz0Tzy>8!elU_Hg zdUE^Jq3ZKTcS-LpWfJrkj)M)q*`rLw zKBueQa)0INfKiS1^ctUkQrwUEG{vh!@vNr--T7HoTAe8JrXTQ&_+w4%y+cr~8C z?=44pnXNp1_Ka?RgUDL-s;Oyx#Zt2|3z3<4O`wz_C ze#8x{zaH6yg=kelik^=AEq5WP*8hL}J=}~v$L$T|Iwoq`!~19N8qLBB={nDro%+(q zwccX~5h`L2|M~aAk-nXzW!%gdFe$v08!v{ipTau^j$6xdGe_RsPQZ;f#5H|-E6?`p zNn~|X#8P7&H(nWg<#LvXsiJ{Sm@wGuJsJ_H@ zgMatAKz1`CVCC5co;rw7OLDF&0E29Qa8vN*)Lu>)r!`#Zm4b7++}9K zs@ZLKMi*LM^^rR)}u#RABj z=bY4$O9;Is96s__%_SX-5o*xP8r*3I;hMRz+Fda>R_A87H=YuSROoESHIAryN+ari ziSsCV4lARfgA9%28csLXr4_D>taqqRlB?aU!Idff%~Kc87CQ$wPuYOy{*Lk!nzj2# ze53H%Fp#V;K<;Se6k)(=wZ0^!_A%CBBt;ELnw~vvTUk3^N=c>lgwlMpB(E?B>D|dz zp2fT7`y^R~VI-aQI~&>vB9iL5mR`|g^s{H2{l`Wd;Gt(vcayVc#>ZLix3V;19-Zb! z8OF?v_BHQtam&j-znWMyJ}Xk?7*I1~{@SeOyB6g}S@^KI=kA;i8?$IbOVkmRWQo8!TshKhaq)jmK*u5;i$&=q{Wl zF+*Jm`urQK#<0YEJ09QzTy%ZR^~|2v3O=NelOnf2shgQRYT0?`x4m->|$r1swZaG$YoqckT=CJ_m;8qYd4M#$~fw| zc$@+Hu6^~+?6N1NAGMrzUL-m_03@>-Uk(~R=hjS$S!*TzsJ9ES!Rm2}*|Q;7_p z7ssyOZeQiltt)tcA@TbxSB+J7b$4pL2RzJD~QiO0x=9v z8MS0(`~?>rdDyV3?>ymjV_3#IQLF4lZ4|-J+}&ca4T3;1#>E}$kCI-W`;ac}Arf|L zfep+KOEc$M zV;Pn1^X|mQUD+K8f(?~LUDPWRx`>DksoZ@7a0_BcBSB4a?C}#Y^oRZu$;oHGESk@oE z*?`^0g!T1qNzv$wf;<5|k*tTybl(<+g^;DfXN8SZ8y&FR{UzuM7Uw7~Svma^Cz}UR zi68JWF+)T6E{E{dqu$8DR;wfs2URx9a5oxbA6~7-Pd(>oW>qO$L-3_Brq#Pm2$$8V zM^`oN9sRLB-ltYi2Fy=uxMsP7{OYlPtXnw9%7SJXkB)mJmf!V;nMUWRL5P>c?{1Nl zI!eVlSu;{NC>w2$^3QOY@Bz;R!+lqQA9v2f<{cuiF%uWExRvN&!bya3J*bFRrLC|} bZX12s=w=NzWyMpx, 2011. +# +msgid "" +msgstr "" +"Project-Id-Version: gdbm 1.9.90\n" +"Report-Msgid-Bugs-To: bug-gdbm@gnu.org\n" +"POT-Creation-Date: 2011-11-13 11:47+0200\n" +"PO-Revision-Date: 2011-08-21 07:03+0200\n" +"Last-Translator: Jakub Bogusz \n" +"Language-Team: Polish \n" +"Language: pl\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " +"|| n%100>=20) ? 1 : 2;\n" + +#: src/gdbmerrno.c:31 +msgid "No error" +msgstr "Brak błędu" + +#: src/gdbmerrno.c:32 +msgid "Malloc error" +msgstr "Błąd malloc" + +#: src/gdbmerrno.c:33 +msgid "Block size error" +msgstr "Błąd rozmiaru bloku" + +#: src/gdbmerrno.c:34 +msgid "File open error" +msgstr "Błąd otwierania pliku" + +#: src/gdbmerrno.c:35 +msgid "File write error" +msgstr "Błąd zapisu pliku" + +#: src/gdbmerrno.c:36 +msgid "File seek error" +msgstr "Błąd przemieszczania w pliku" + +#: src/gdbmerrno.c:37 +msgid "File read error" +msgstr "Błąd odczytu pliku" + +#: src/gdbmerrno.c:38 +msgid "Bad magic number" +msgstr "Błędna liczba magiczna" + +#: src/gdbmerrno.c:39 +msgid "Empty database" +msgstr "Pusta baza danych" + +#: src/gdbmerrno.c:40 +msgid "Can't be reader" +msgstr "Nie można być czytającym" + +#: src/gdbmerrno.c:41 +msgid "Can't be writer" +msgstr "Nie można być piszącym" + +#: src/gdbmerrno.c:42 +msgid "Reader can't delete" +msgstr "Czytający nie może usuwać" + +#: src/gdbmerrno.c:43 +msgid "Reader can't store" +msgstr "Czytający nie może zapisywać" + +#: src/gdbmerrno.c:44 +msgid "Reader can't reorganize" +msgstr "Czytający nie może reorganizować" + +#: src/gdbmerrno.c:45 +msgid "Unknown update" +msgstr "Nieznane uaktualnienie" + +#: src/gdbmerrno.c:46 src/testgdbm.c:395 +#, c-format +msgid "Item not found" +msgstr "Nie znaleziono elementu" + +#: src/gdbmerrno.c:47 +msgid "Reorganize failed" +msgstr "Reorganizacja nie powiodła się" + +#: src/gdbmerrno.c:48 +msgid "Cannot replace" +msgstr "Nie można zastąpić" + +#: src/gdbmerrno.c:49 +msgid "Illegal data" +msgstr "Niedozwolone dane" + +#: src/gdbmerrno.c:50 +msgid "Option already set" +msgstr "Opcja już ustawiona" + +#: src/gdbmerrno.c:51 +msgid "Illegal option" +msgstr "Niedozwolona opcja" + +#: src/gdbmerrno.c:52 +msgid "Byte-swapped file" +msgstr "Plik z inną kolejnością bajtów" + +#: src/gdbmerrno.c:53 +msgid "Wrong file offset" +msgstr "Błędny offset pliku" + +#: src/gdbmerrno.c:54 +msgid "Bad file flags" +msgstr "Błędne flagi pliku" + +#: src/gdbmerrno.c:55 +msgid "Cannot stat file" +msgstr "Nie można wykonać stat na pliku" + +#: src/gdbmerrno.c:56 +#, fuzzy +msgid "Unexpected end of file" +msgstr "nieoczekiwany koniec pliku" + +#: src/gdbmerrno.c:64 +msgid "Unknown error" +msgstr "Nieznany błąd" + +#: src/bucket.c:67 src/bucket.c:148 +msgid "couldn't init cache" +msgstr "nie udało się zainicjować bufora" + +#: src/bucket.c:97 src/bucket.c:311 src/falloc.c:185 src/falloc.c:282 +#: src/findkey.c:64 src/update.c:36 src/update.c:82 +msgid "lseek error" +msgstr "błąd lseek" + +#: src/bucket.c:188 src/falloc.c:259 src/findkey.c:57 src/gdbmseq.c:73 +msgid "malloc error" +msgstr "błąd malloc" + +#: src/falloc.c:181 +msgid "malloc failed" +msgstr "malloc nie powiodło się" + +#: src/testgdbm.c:82 +#, c-format +msgid "" +"******* %s **********\n" +"\n" +"bits = %d\n" +"count= %d\n" +"Hash Table:\n" +msgstr "" +"******* %s **********\n" +"\n" +"bitów = %d\n" +"liczba= %d\n" +"Tablica haszująca:\n" + +#: src/testgdbm.c:85 +#, c-format +msgid " # hash value key size data size data adr home\n" +msgstr "" +" # wartość hasza rozm.klucza rozm.danych adr.danych początek\n" + +#: src/testgdbm.c:95 +#, c-format +msgid "" +"\n" +"Avail count = %1d\n" +msgstr "" +"\n" +"Liczba dostępnych = %1d\n" + +#: src/testgdbm.c:96 +#, c-format +msgid "Avail adr size\n" +msgstr "Dost. adr. rozm.\n" + +#: src/testgdbm.c:121 src/testgdbm.c:175 +#, c-format +msgid "Out of memory" +msgstr "Brak pamięci" + +#: src/testgdbm.c:160 +#, c-format +msgid "" +"\n" +"header block\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"blok nagłówka\n" +"rozmiar = %d\n" +"liczba = %d\n" + +#: src/testgdbm.c:196 +#, c-format +msgid "" +"\n" +"block = %d\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"blok = %d\n" +"rozmiar = %d\n" +"liczba = %d\n" + +#: src/testgdbm.c:217 +#, c-format +msgid "" +"Bucket Cache (size %d):\n" +" Index: Address Changed Data_Hash \n" +msgstr "" +"Bufor kubełkowy (rozmiar %d):\n" +" Indeks: Adres Zmieniony Hasz danych\n" + +#: src/testgdbm.c:225 +msgid "True" +msgstr "tak" + +#: src/testgdbm.c:225 +msgid "False" +msgstr "nie" + +#: src/testgdbm.c:230 +#, c-format +msgid "Bucket cache has not been initialized.\n" +msgstr "Bufor kubełkowy nie został zainicjowany.\n" + +#: src/testgdbm.c:236 +#, c-format +msgid "Usage: %s OPTIONS\n" +msgstr "Składnia: %s OPCJE\n" + +#: src/testgdbm.c:237 +#, c-format +msgid "Test and modify a GDBM database.\n" +msgstr "Testowanie i modyfikowanie bazy danych GDBM.\n" + +#: src/testgdbm.c:239 +#, c-format +msgid "" +"OPTIONS are:\n" +"\n" +msgstr "" +"OPCJE to:\n" +"\n" + +#: src/testgdbm.c:240 +#, c-format +msgid " -b SIZE set block size\n" +msgstr " -b ROZMIAR ustawienie rozmiaru bloku\n" + +#: src/testgdbm.c:241 +#, c-format +msgid " -c SIZE set cache size\n" +msgstr " -c ROZMIAR ustawienie rozmiaru bufora (cache)\n" + +#: src/testgdbm.c:242 +#, c-format +msgid " -g FILE operate on FILE instead of `junk.gdbm'\n" +msgstr " -g PLIK operowanie na PLIKU zamiast `junk.gdbm'\n" + +#: src/testgdbm.c:243 +#, c-format +msgid " -h print this help summary\n" +msgstr " -h wyświetlenie tego opisu\n" + +#: src/testgdbm.c:244 +#, c-format +msgid " -l disable file locking\n" +msgstr " -l wyłączenie blokowania pliku\n" + +#: src/testgdbm.c:245 +#, c-format +msgid " -m disable file mmap\n" +msgstr " -m wyłączenie użycia mmap na pliku\n" + +#: src/testgdbm.c:246 +#, c-format +msgid " -n create database\n" +msgstr " -n utworzenie bazy danych\n" + +#: src/testgdbm.c:247 +#, c-format +msgid " -r open database in read-only mode\n" +msgstr " -r otworzenie bazy danych tylko do odczytu\n" + +#: src/testgdbm.c:248 +#, c-format +msgid " -s synchronize to the disk after each write\n" +msgstr " -s synchronizacja na dysk po każdym zapisie\n" + +#: src/testgdbm.c:249 +#, c-format +msgid " -v print program version\n" +msgstr " -v wypisanie wersji programu\n" + +#: src/testgdbm.c:251 +#, c-format +msgid "Report bugs to <%s>.\n" +msgstr "Błędy prosimy zgłaszać na adres <%s>.\n" + +#: src/testgdbm.c:290 +#, c-format +msgid "cannot open file `%s' for reading: %s" +msgstr "nie można otworzyć pliku `%s' do odczytu: %s" + +#: src/testgdbm.c:301 +#, c-format +msgid "%s:%d: line too long" +msgstr "%s:%d: linia zbyt długa" + +#: src/testgdbm.c:309 +#, c-format +msgid "%s:%d: malformed line" +msgstr "%s:%d: linia źle sformatowana" + +#: src/testgdbm.c:320 +#, c-format +msgid "%d: item not inserted: %s" +msgstr "%d: element nie wstawiony: %s" + +#: src/testgdbm.c:379 +#, c-format +msgid "There is %d item in the database.\n" +msgid_plural "There are %d items in the database.\n" +msgstr[0] "W bazie danych jest %d element.\n" +msgstr[1] "W bazie danych są %d elementy.\n" +msgstr[2] "W bazie danych jest %d elementów.\n" + +#: src/testgdbm.c:397 +#, c-format +msgid "Can't delete: %s" +msgstr "Nie można usunąć: %s" + +#: src/testgdbm.c:416 src/testgdbm.c:450 src/testgdbm.c:475 +#, c-format +msgid "No such item found.\n" +msgstr "Nie znaleziono elementu.\n" + +#: src/testgdbm.c:431 +#, c-format +msgid "Item not inserted.\n" +msgstr "Element nie wstawiony.\n" + +#: src/testgdbm.c:487 +#, c-format +msgid "Reorganization failed.\n" +msgstr "Reorganizacja nie powiodła się.\n" + +#: src/testgdbm.c:489 +#, c-format +msgid "Reorganization succeeded.\n" +msgstr "Reorganizacja powiodła się.\n" + +#: src/testgdbm.c:521 +msgid "Current bucket" +msgstr "Bieżący kubełek" + +#: src/testgdbm.c:522 +#, c-format +msgid "" +"\n" +" current directory entry = %d.\n" +msgstr "" +"\n" +" bieżący wpis katalogu = %d.\n" + +#: src/testgdbm.c:524 +#, c-format +msgid " current bucket address = %lu.\n" +msgstr " adres bieżącego kubełka = %lu.\n" + +#: src/testgdbm.c:535 src/testgdbm.c:544 +#, c-format +msgid "not a number (stopped near %s)\n" +msgstr "nie jest liczbą (zatrzymano po %s)\n" + +#: src/testgdbm.c:563 +#, c-format +msgid "Not a bucket.\n" +msgstr "Nie jest kubełkiem.\n" + +#: src/testgdbm.c:588 +#, c-format +msgid "Hash table directory.\n" +msgstr "Katalog tablicy haszującej.\n" + +#: src/testgdbm.c:589 +#, c-format +msgid "" +" Size = %d. Bits = %d. \n" +"\n" +msgstr "" +" Rozmiar = %d. Bitów = %d.\n" +"\n" + +#: src/testgdbm.c:608 +#, c-format +msgid "" +"\n" +"File Header: \n" +"\n" +msgstr "" +"\n" +"Nagłówek pliku: \n" +"\n" + +#: src/testgdbm.c:609 +#, c-format +msgid " table = %lu\n" +msgstr " tablica = %lu\n" + +#: src/testgdbm.c:611 +#, c-format +msgid " table size = %d\n" +msgstr " rozm.tablicy = %d\n" + +#: src/testgdbm.c:612 +#, c-format +msgid " table bits = %d\n" +msgstr " bitów tabl. = %d\n" + +#: src/testgdbm.c:613 +#, c-format +msgid " block size = %d\n" +msgstr " rozm.bloku = %d\n" + +#: src/testgdbm.c:614 +#, c-format +msgid " bucket elems = %d\n" +msgstr " elem.kubełka = %d\n" + +#: src/testgdbm.c:615 +#, c-format +msgid " bucket size = %d\n" +msgstr " rozm.kubełka = %d\n" + +#: src/testgdbm.c:616 +#, c-format +msgid " header magic = %x\n" +msgstr " l.magiczna = %x\n" + +#: src/testgdbm.c:617 +#, c-format +msgid " next block = %lu\n" +msgstr " nast.blok = %lu\n" + +#: src/testgdbm.c:619 +#, c-format +msgid " avail size = %d\n" +msgstr " rozm.dost. = %d\n" + +#: src/testgdbm.c:620 +#, c-format +msgid " avail count = %d\n" +msgstr " liczba dost. = %d\n" + +#: src/testgdbm.c:621 +#, c-format +msgid " avail nx blk = %lu\n" +msgstr " nast.bl.dost.= %lu\n" + +#: src/testgdbm.c:633 +#, c-format +msgid "hash value = %x. \n" +msgstr "wartość hasza = %x. \n" + +#: src/testgdbm.c:689 +#, c-format +msgid "cannot fetch data (key %.*s)" +msgstr "nie można pobrać danych (klucz %.*s)" + +#: src/testgdbm.c:722 +#, c-format +msgid "gdbm_export failed, %s" +msgstr "gdbm_export nie powiódł się, %s" + +#: src/testgdbm.c:735 +#, c-format +msgid "gdbm_import failed, %s" +msgstr "gdbm_import nie powiódł się, %s" + +#: src/testgdbm.c:741 +msgid "yes" +msgstr "tak" + +#: src/testgdbm.c:741 +msgid "no" +msgstr "nie" + +#: src/testgdbm.c:749 +#, c-format +msgid "Database file: %s\n" +msgstr "Plik bazy danych: %s\n" + +#: src/testgdbm.c:750 src/testgdbm.c:760 +#, c-format +msgid "Zero terminated keys: %s\n" +msgstr "Klucze zakończone zerami: %s\n" + +#: src/testgdbm.c:751 +#, c-format +msgid "Zero terminated data: %s\n" +msgstr "Dane zakończone zerami: %s\n" + +#: src/testgdbm.c:792 +msgid "count (number of entries)" +msgstr "liczba elementów" + +#: src/testgdbm.c:795 src/testgdbm.c:801 src/testgdbm.c:813 src/testgdbm.c:845 +msgid "key" +msgstr "klucz" + +#: src/testgdbm.c:795 +msgid "delete" +msgstr "usunięcie" + +#: src/testgdbm.c:798 src/testgdbm.c:804 src/testgdbm.c:819 +msgid "file" +msgstr "plik" + +#: src/testgdbm.c:798 +msgid "export" +msgstr "eksport" + +#: src/testgdbm.c:801 +msgid "fetch" +msgstr "pobranie" + +#: src/testgdbm.c:804 +msgid "import" +msgstr "import" + +#: src/testgdbm.c:807 +msgid "list" +msgstr "lista" + +#: src/testgdbm.c:810 +msgid "[key]" +msgstr "[klucz]" + +#: src/testgdbm.c:810 +msgid "nextkey" +msgstr "następny_klucz" + +#: src/testgdbm.c:813 +msgid "data" +msgstr "dane" + +#: src/testgdbm.c:813 +msgid "store" +msgstr "zapisanie" + +#: src/testgdbm.c:816 +msgid "firstkey" +msgstr "pierwszy_klucz" + +#: src/testgdbm.c:820 +msgid "read entries from file and store" +msgstr "odczyt elementów z pliku i zapisanie" + +#: src/testgdbm.c:823 +msgid "reorganize" +msgstr "reorganizacja" + +#: src/testgdbm.c:826 +msgid "toggle key nul-termination" +msgstr "przełączenie kończenia klucza zerem" + +#: src/testgdbm.c:829 +msgid "print avail list" +msgstr "wypisanie listy dostępnych" + +#: src/testgdbm.c:832 +msgid "bucket-number" +msgstr "numer_kubełka" + +#: src/testgdbm.c:832 +msgid "print a bucket" +msgstr "wypisanie kubełka" + +#: src/testgdbm.c:836 +msgid "print current bucket" +msgstr "wypisanie bieżącego kubełka" + +#: src/testgdbm.c:839 +msgid "print hash directory" +msgstr "wypisanie katalogu haszy" + +#: src/testgdbm.c:842 +msgid "print file header" +msgstr "wypisanie nagłówka pliku" + +#: src/testgdbm.c:845 +msgid "hash value of key" +msgstr "wartość hasza klucza" + +#: src/testgdbm.c:848 +msgid "print the bucket cache" +msgstr "wypisanie bufora kubełkowego" + +#: src/testgdbm.c:851 +msgid "print current program status" +msgstr "wypisanie bieżącego stanu programu" + +#: src/testgdbm.c:854 +msgid "print version of gdbm" +msgstr "wypisanie wersji gdbm" + +#: src/testgdbm.c:857 +msgid "toggle data nul-termination" +msgstr "przełączenie kończenia danych zerem" + +#: src/testgdbm.c:860 +msgid "print this help list" +msgstr "wyświetlenie tego opisu" + +#: src/testgdbm.c:863 +msgid "quit the program" +msgstr "zakończenie programu" + +#: src/testgdbm.c:1063 +#, c-format +msgid "-s is incompatible with -r" +msgstr "-s jest niezgodne z -r" + +#: src/testgdbm.c:1070 +#, c-format +msgid "-r is incompatible with -n" +msgstr "-r jest niezgodne z -n" + +#: src/testgdbm.c:1077 +#, c-format +msgid "-n is incompatible with -r" +msgstr "-n jest niezgodne z -r" + +#: src/testgdbm.c:1099 +#, c-format +msgid "unknown option; try `%s -h' for more info\n" +msgstr "nieznana opcja; `%s -h' poda więcej informacji\n" + +#: src/testgdbm.c:1123 +#, c-format +msgid "gdbm_open failed: %s" +msgstr "gdbm_open nie powiodło się: %s" + +#: src/testgdbm.c:1127 +#, c-format +msgid "gdbm_setopt failed: %s" +msgstr "gdbm_setopt nie powiodło się: %s" + +#: src/testgdbm.c:1133 +#, c-format +msgid "" +"\n" +"Welcome to the gdbm test program. Type ? for help.\n" +"\n" +msgstr "" +"\n" +"Witamy w programie testowym gdbm. Wpisanie ? wyświetli pomoc.\n" +"\n" + +#: src/testgdbm.c:1166 +#, c-format +msgid "Invalid command. Try ? for help." +msgstr "Błędne polecenie. Wpisanie ? wyświetli pomoc." + +#: src/testgdbm.c:1167 +#, c-format +msgid "Unknown command" +msgstr "Nieznane polecenie" + +#: src/testgdbm.c:1182 +#, fuzzy, c-format +msgid "%s: not enough arguments" +msgstr "%c: zbyt mało argumentów" + +#: src/testgdbm.c:1187 +#, c-format +msgid "unexpected eof" +msgstr "nieoczekiwany koniec pliku" + +#: src/testgdbm.c:1208 +#, c-format +msgid "cannot run pager `%s': %s" +msgstr "nie można uruchomić programu stronicującego `%s': %s" + +#: src/update.c:110 +#, c-format +msgid "gdbm fatal: %s\n" +msgstr "błąd krytyczny gdbm: %s\n" + +#~ msgid "read error" +#~ msgstr "błąd odczytu" + +#~ msgid "write error" +#~ msgstr "błąd zapisu" + +#~ msgid "nextkey on last key (from n, 1 or 2)" +#~ msgstr "następny_klucz dla ostatniego klucza (od n, 1 lub 2)" + +#~ msgid "Multicharacter commands are not yet implemented.\n" +#~ msgstr "Wieloznakowe polecenia nie są jeszcze zaimplementowane.\n" diff --git a/po/quot.sed b/po/quot.sed new file mode 100644 index 0000000..0122c46 --- /dev/null +++ b/po/quot.sed @@ -0,0 +1,6 @@ +s/"\([^"]*\)"/“\1”/g +s/`\([^`']*\)'/‘\1’/g +s/ '\([^`']*\)' / ‘\1’ /g +s/ '\([^`']*\)'$/ ‘\1’/g +s/^'\([^`']*\)' /‘\1’ /g +s/“”/""/g diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin new file mode 100644 index 0000000..2436c49 --- /dev/null +++ b/po/remove-potcdate.sin @@ -0,0 +1,19 @@ +# Sed script that remove the POT-Creation-Date line in the header entry +# from a POT file. +# +# The distinction between the first and the following occurrences of the +# pattern is achieved by looking at the hold space. +/^"POT-Creation-Date: .*"$/{ +x +# Test if the hold space is empty. +s/P/P/ +ta +# Yes it was empty. First occurrence. Remove the line. +g +d +bb +:a +# The hold space was nonempty. Following occurrences. Do nothing. +x +:b +} diff --git a/po/stamp-po b/po/stamp-po new file mode 100644 index 0000000..9788f70 --- /dev/null +++ b/po/stamp-po @@ -0,0 +1 @@ +timestamp diff --git a/po/uk.gmo b/po/uk.gmo new file mode 100644 index 0000000000000000000000000000000000000000..9aada706f7e1bd13b676b6f8947e256897a30644 GIT binary patch literal 13092 zcmcJUYjB*^dB+do61vmT zt&}7N$2Kk0CJeC&kd`!cJ54iFUyG10beK+O+DtR=W;!8lX*!*@A9_jCX}+YLY1-fa zIcHb9D?3TcbVo=3J-6pP_jB3rUVPRU9iLs4_fSU9a_%Vj)VciQ^YD4jd9Vat0zMAD z4crS}3;quHLGZiaW#Ad-JGTbB98|p$aW{Aa^}}Eh{5SAQ@O>9Jw**`d4uGEmuL1Xg zH-di#ei%Ie!oc4O@KWmcg6{wyiS=y}zZmgr5nqk?=b*;_W5oZC?eDlK(7O`!^sffr z1wI_xKMiW$9`HJFKlpC&uOt32;w30Wd<}w-c56ZD>F$VQ;A-j(Q1TuD-wwV3Lc;xP z#2HYy z!GDVN^B^uezZ=xJK~S!+5|n(mfSPxI#7U4pw}pS0%Ka*+`Oksx1iudQ=l&?xUk9bX z?}IGq3JjKh-vfRCTn63-j)J(Ndl8geUjaq`AgJ|U1x5Fppy>Q9D7*b2;sr1(y(|GW zuL#P&SAz1hkAoWjS&%92xmf=?sCEAsJO}(n#BYJ3_ZPAMZ$Rng??LhRJy81nuZWi- z6kpwkLABomir@P{@%soU`j3KVg4;o@y9*?g+*6?R{~Rd(_k(W*4})(3kAd$8PlD3N zcR|_td!W|+5h!^tVR5ZD1gd=vD1PpX^%P{N+YV~}mp~7G4J?4)044Xg!Jh};0A;@) zf?D?yjI22RASgLDfEU5wN5N~Tmr%0i?E{r34uemE-v)=lO%S^od={KhJ9s;I8ey*5Ab-jlUj*l)D#X30DXCb5BP+04}GVgVMvz_-oNUr6e=sW}}e|-l0HE=)Z!K*J1`F<3X zKg~wm1Io_(LGk-~Z2xy~kovh0gGF~8_z~~{@DA`vQ1iY6-Uk+7?rLxocrUmYydC@( z@GkJ0E7*&`9pE`&5vHYw%nzk0o(@SqV7phcH9r% z3H}}U5V#DbY2Gv73h+g20 zeLM(?{%-It@K~&$M<*(FD?m)5MYeWX`?6n8hB*U%2tYOC%<@vqIlHjyZ~+* zyqF?CyqxklMW2MSj&imtd~gZNEe&uvSd8HY@?t zADf{(NV%J$kK&DRa-XM^DY&?Mn4*tjTAz1P#wcqjpP)=pE}?vkqI_}%8it3Df+C|zk(lYW?7Ope7TY(V~tui>#6a7l^-Y%7F^-x&814!kJXxtp>4QK z+qz0M@wX?Xa*~bs0uA>i)v?-i;u|&Jm`wacdDFCSB=v@$$!Zf>X?oE6(b<{AulD1$ z%ugoOnL$n4RIQCo*-C|a<Ap7o!&)#k;2^`sFNws|&a?39DXN@GZ^m2A+2U$_2_ z9!j;DBr7!%UrR$*C9O9Q%-6>K!;du6sX=LMiA|pD=D@zsWEFJZn5@)IbH3i3o-Spx zHoCfKbh%P5ZNfa`vXS&#NhfUR^p773%^4e)E*dwMC1PG0+*GOu8PQzd2N~1O7+*;} zv&zL5G{w zW~b>&U6CoLnH5r%x3ESrQbob7AbYX)8_Q1By(#l2btQEEUVEFbhXxE zdZ~2`l&=^mc)va^CtF9nzqzf(wUecE0yX$s2#tqKI2H`^Lrx$enQk{F1V<&UG%BSk zY$>y@nQbJ+`j*nn3>3tnTU$z(-~)+84y<+R76I*g84qhDW+Vp4a9J`_EsfcHRqKsX zBNB|cJ(%B#O9ilXia^2LIz7{v?L@6xSE|+%XX)L-IcUV{ie}$cuP4b=cini54W^0U zkDYA=iPu-F$waAY%XKQXnFb;2)~BTHN|}v@M3fS=qwGOl+l5=-cGGdTqVhtu?X}R~ zP^x0g$itnrg)j9cX~g{8CNuO-^i=XeFI4Z^IJ*9>JMZzO49BEuJo!>pLbHV=4R=?w zp=>>!OtVG0yJ;sqjhVrML3-P=q?S#Tl+}9M>+G;)CLK%+xa6r8!Yo=DcB`ej}2MYS%@9%DI*CS%kdpmNgqX7S@Q#Buf-S1LdF-Qnfbi zc6#p&DKRXLQNS%4lrlenlQ)pQQrl3AE|#L#Aj`M zT#Eigl5vPgvgu07oU*YMe6_!a-Mt=q9^mVPE?Bb|;~Lv27{-$ZwwG*vsg45!gICtC zaIw>T+>*n?1N9|#Hj%~IF)h5}sH~a#892|pMunbQvszZLDx`4(wtp9nElb1l@)ez< zDhaD;br-!P*($3!W6N38k5{sK1J<0Kn#LJh4N|H8P#7O=eibom!yc+koAHAyEHnp! z%s-4zBY{>4vPi<3$x7{G5@~rWyQ1rAf_1SImT>x7t<)Qi%+QH=c7TOQi+Q&2} zt?{QIiwaqa>szWzlTwBpR}@^>yxU>euG-#gD~A5wJuHrDH@0_v<-BG+cA7=QCL3E! zx=t#JjdJ?nGtq+m2dyq9;>kj0l}_EKn%G?gA_Fd@$6#?kp4Fy1}(Uo3Dcihw$Cxbtet_b#Y zyjF0tN!@MCYL76vxV~KcSU4<=gwy));Pr#o4;4aEDQ>7wRLaFQq?Y1nZA3YyD6wyv zNSlMCuENH z(zuZ+=|q#TERH6n=@EbLR8}GyHM9}wXi<*Y)5Yf0O|oTuuwH{o!r^5i=_NAan^T1i z>o?rGpqAmmp~Bi)+8~UJy1a~#m9{oM!d6>JSNgHZQbu5{x_5M4amB(otvsG&#alVm zggml>b5LPpwV9Qw#dVyTNLlHORqLykuk_*Ts&v(=VYa)gJ-q|NL#kbVxqTh_z^Y+& z4aKe-S1oII-LPu8zAn{_p&N#W{G*SCDU2Dqf;q#?S+=t9@#1Ysstbq|dq-``jv#(` za2fY2pTC-)Y&}ldm7mDx@>hKRa(;luxz=MopU)4_cOXBOpUe-pwudt`v-0O#d-G$h zrv`m~gsG3U9v@VnT@LeoOgPL0O*%xG_pQ&<^a>3J!gVo!0lJTgx(2{PYn!OB{Bczw z=~?!u=mr|CeQ^+6Y-85(e9qjK^`C*n(fmkjZ|m{aQ~tHzTm9Oxt9UL8~KtdxmLhK~lt-Ds;~` zbrre@ga*#)eC)mog%hy03kgo-Ct7=aYX@RKfu?<%5F*Z_>fH=F(A{_hHDIvT4ruZ9 zNNbxJgT`PKiGXTgO1BGcxA{x?uVb4R^PTxi%!wbgAuWrRtTkt9YOgIN__nyM?M7(q z|4wK=$Yx|FeEwVc)A^V37uuW%Wi?y;VC1AT$aF2Mz^&Q2b8UX@m=RojZ6i&T(d*Xl)N(6djCP=4 zj>+=<^B3R4O%MVG0fL<{&4K*oAV>5DTYB;3yyNsgW~wI;=2}nWM>{O-vUQ?_MtSiC z-oo}oYloTb1k%Hg)DkphUfSAAQV~&diVTn+S2SZv6Wm(PkP+;TB)|O^*wP zg)l6#h(*1U2Lq0_wxO=Qr$`)p<`?e@CFUWadVaKPHoi3K|x4zDCnds z{hMj>-|W$DO!y2BFCsxYw!vH>fl`#jLee67Bo3l41Q<+`0mQ#TEWDh&ITH55^5#fn zE`PQiHl4i*C+hb2g3EtHY%i!?S>jdvQW71^xiA7V zC#mlj*@tkpn47s~oqDOD?t|DB);+#MHdCxK@fiPQ->}h~Bplch?J$MGEwOej%0Wju z#C6TbW2)6A@e1n1#~l2d*5qDMUxX=cHP_c=A!Mh(1#gQ(4w*!7ia+iN4tk88F>Drd z7Ke5Q)B(g?SQ-f)%?2Y$PESZID>*3*+dCF(b?=VR4HO4v^S-PB<&Ji2ZwzO?sDH5* z{LV~EfQkPwPK4Tag1y$>eh=#1K~d+zmfi20xLeQ8d0HoCQRSYO@mj3i+8wQI#|a#^ zb0S#8OXr9l_I`XOjuk7Wo2dy>zE#X!gxF0;6UcYSeVP!At|bzi^4jn z0`LBbi@!`%>IAnJoyO(A5^jkKS4l!Iwm9ty;m8w?flt^TqXQ4ou3XefVAA(j)XQb`WbD zo=H9;tPe>*h_Xo zQ!Y)cp`rXl9|IPLAssEKt3MT;qJJTrb*{6tw=kbj(3YefIE0t^?=vi~kkxgneSfAy zJB&yFeIeYJPejWysjZ^85-vgnSkK6Jrc-qD0wm6r{|GCsf2b?6H89*pkHX}S(t z4g=3Cd0CE?3&mTvqoL>7%eB=fE|gZ45!uM2Z5?FdvjBc)S*0f;?4>Pw(&CQz3x)j# zAztFfsH|hZK7^kUPTQ?tEP`TBF*p2j5xP(NQl?9-e!*xzowd~vH(o^QWW3HpnnSn8 zPo=rGN=&c1OV|eA%bNWVVg~J!wS7Y9-e2TN-Md!2%1OoM8VhsmHjV{frLWgCI93QS zHgMap?RvvGf2lpRa1LUMlx@1#oo3EngzN_vbD8dk67x2DC}?dD5-?RBXZ&;vZM%ZG zWaO%~BY0pJIn=^DJBZskw3oW1?HU~2xa*OoYdUJy;mHC|X@WqsH{pfn-bITmOcvf= zdtaFs4Ms{h?Hq~2Bdgtq`nl|uK@noFvHkQ~JMk$3$lev0!E3T@5Hel268q=1W4TKS z;fNAms_d5~i~rC{mf zF()65auBscS$mpO#zFX=mr*?&*%?M}?p-gYvQ}HDPB@xN*jYj*R~{^)J5-O%Cy$, 2011. +msgid "" +msgstr "" +"Project-Id-Version: gdbm 1.9.90\n" +"Report-Msgid-Bugs-To: bug-gdbm@gnu.org\n" +"POT-Creation-Date: 2011-11-13 11:47+0200\n" +"PO-Revision-Date: 2011-08-18 19:17+0300\n" +"Last-Translator: Yuri Chornoivan \n" +"Language-Team: Ukrainian \n" +"Language: uk\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=4; plural=n==1 ? 3 : n%10==1 && n%100!=11 ? 0 : n" +"%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" +"X-Generator: Lokalize 1.2\n" + +#: src/gdbmerrno.c:31 +msgid "No error" +msgstr "Без помилок" + +#: src/gdbmerrno.c:32 +msgid "Malloc error" +msgstr "Помилка malloc" + +#: src/gdbmerrno.c:33 +msgid "Block size error" +msgstr "Помилка у розмірі блоку" + +#: src/gdbmerrno.c:34 +msgid "File open error" +msgstr "Помилка відкриття файла" + +#: src/gdbmerrno.c:35 +msgid "File write error" +msgstr "Помилка запису до файла" + +#: src/gdbmerrno.c:36 +msgid "File seek error" +msgstr "Помилка позиціювання у файлі" + +#: src/gdbmerrno.c:37 +msgid "File read error" +msgstr "Помилка читання файла" + +#: src/gdbmerrno.c:38 +msgid "Bad magic number" +msgstr "Помилкове магічне число" + +#: src/gdbmerrno.c:39 +msgid "Empty database" +msgstr "Порожня база даних" + +#: src/gdbmerrno.c:40 +msgid "Can't be reader" +msgstr "Не може читати" + +#: src/gdbmerrno.c:41 +msgid "Can't be writer" +msgstr "Не може записувати" + +#: src/gdbmerrno.c:42 +msgid "Reader can't delete" +msgstr "Зчитувач не може вилучати" + +#: src/gdbmerrno.c:43 +msgid "Reader can't store" +msgstr "Зчитувач не може зберігати" + +#: src/gdbmerrno.c:44 +msgid "Reader can't reorganize" +msgstr "Зчитувач не може змінювати впорядкування" + +#: src/gdbmerrno.c:45 +msgid "Unknown update" +msgstr "Невідоме оновлення" + +#: src/gdbmerrno.c:46 src/testgdbm.c:395 +#, c-format +msgid "Item not found" +msgstr "Пункт не знайдено" + +#: src/gdbmerrno.c:47 +msgid "Reorganize failed" +msgstr "Спроба перевпорядкування завершилася невдало" + +#: src/gdbmerrno.c:48 +msgid "Cannot replace" +msgstr "Заміна неможлива" + +#: src/gdbmerrno.c:49 +msgid "Illegal data" +msgstr "Некоректні дані" + +#: src/gdbmerrno.c:50 +msgid "Option already set" +msgstr "Параметр вже встановлено" + +#: src/gdbmerrno.c:51 +msgid "Illegal option" +msgstr "Некоректний параметр" + +#: src/gdbmerrno.c:52 +msgid "Byte-swapped file" +msgstr "Файл зі зміненим порядком байтів" + +#: src/gdbmerrno.c:53 +msgid "Wrong file offset" +msgstr "Помилковий відступ від початку файла" + +#: src/gdbmerrno.c:54 +msgid "Bad file flags" +msgstr "Помилкові параметри файла" + +#: src/gdbmerrno.c:55 +msgid "Cannot stat file" +msgstr "Не вдалося виконати stat для файла" + +#: src/gdbmerrno.c:56 +#, fuzzy +msgid "Unexpected end of file" +msgstr "неочікуваний символ кінця файла" + +#: src/gdbmerrno.c:64 +msgid "Unknown error" +msgstr "Невідома помилка" + +#: src/bucket.c:67 src/bucket.c:148 +msgid "couldn't init cache" +msgstr "не вдалося ініціалізувати кеш" + +#: src/bucket.c:97 src/bucket.c:311 src/falloc.c:185 src/falloc.c:282 +#: src/findkey.c:64 src/update.c:36 src/update.c:82 +msgid "lseek error" +msgstr "помилка lseek" + +#: src/bucket.c:188 src/falloc.c:259 src/findkey.c:57 src/gdbmseq.c:73 +msgid "malloc error" +msgstr "помилка malloc" + +#: src/falloc.c:181 +msgid "malloc failed" +msgstr "невдала спроба виконати malloc" + +#: src/testgdbm.c:82 +#, c-format +msgid "" +"******* %s **********\n" +"\n" +"bits = %d\n" +"count= %d\n" +"Hash Table:\n" +msgstr "" +"******* %s **********\n" +"\n" +"бітів = %d\n" +"кільк.= %d\n" +"Таблиця хешів:\n" + +#: src/testgdbm.c:85 +#, c-format +msgid " # hash value key size data size data adr home\n" +msgstr " # значення хешу розм. ключа розм. даних адр. дан. домівка\n" + +#: src/testgdbm.c:95 +#, c-format +msgid "" +"\n" +"Avail count = %1d\n" +msgstr "" +"\n" +"Кіль. дост. = %1d\n" + +#: src/testgdbm.c:96 +#, c-format +msgid "Avail adr size\n" +msgstr "Дост. адр. розмір\n" + +#: src/testgdbm.c:121 src/testgdbm.c:175 +#, c-format +msgid "Out of memory" +msgstr "Не вистачає пам'яті" + +#: src/testgdbm.c:160 +#, c-format +msgid "" +"\n" +"header block\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"блок заголовкаk\n" +"розмір = %d\n" +"кільк. = %d\n" + +#: src/testgdbm.c:196 +#, c-format +msgid "" +"\n" +"block = %d\n" +"size = %d\n" +"count = %d\n" +msgstr "" +"\n" +"блок = %d\n" +"розмір= %d\n" +"кільк.= %d\n" + +#: src/testgdbm.c:217 +#, c-format +msgid "" +"Bucket Cache (size %d):\n" +" Index: Address Changed Data_Hash \n" +msgstr "" +"Кеш ділянок (розмір %d):\n" +" Номер: Адреса Змінено Хеш_даних \n" + +#: src/testgdbm.c:225 +msgid "True" +msgstr "Так" + +#: src/testgdbm.c:225 +msgid "False" +msgstr "Ні" + +#: src/testgdbm.c:230 +#, c-format +msgid "Bucket cache has not been initialized.\n" +msgstr "Кеш ділянок не було ініціалізовано.\n" + +#: src/testgdbm.c:236 +#, c-format +msgid "Usage: %s OPTIONS\n" +msgstr "Використання: %s ПАРАМЕТРИ\n" + +#: src/testgdbm.c:237 +#, c-format +msgid "Test and modify a GDBM database.\n" +msgstr "Перевірка і внесення змін до бази даних GDBM.\n" + +#: src/testgdbm.c:239 +#, c-format +msgid "" +"OPTIONS are:\n" +"\n" +msgstr "" +"ПАРАМЕТРИ:\n" +"\n" + +#: src/testgdbm.c:240 +#, c-format +msgid " -b SIZE set block size\n" +msgstr " -b РОЗМІР встановити розмір блоку\n" + +#: src/testgdbm.c:241 +#, c-format +msgid " -c SIZE set cache size\n" +msgstr " -c РОЗМІР встановити розмір кешу\n" + +#: src/testgdbm.c:242 +#, c-format +msgid " -g FILE operate on FILE instead of `junk.gdbm'\n" +msgstr " -g ФАЙЛ обробити ФАЙЛ замість «junk.gdbm»\n" + +#: src/testgdbm.c:243 +#, c-format +msgid " -h print this help summary\n" +msgstr " -h вивести цю коротку довідку\n" + +#: src/testgdbm.c:244 +#, c-format +msgid " -l disable file locking\n" +msgstr " -l вимкнути блокування файлів\n" + +#: src/testgdbm.c:245 +#, c-format +msgid " -m disable file mmap\n" +msgstr " -m вимкнути mmap для файлів\n" + +#: src/testgdbm.c:246 +#, c-format +msgid " -n create database\n" +msgstr " -n створити базу даних\n" + +#: src/testgdbm.c:247 +#, c-format +msgid " -r open database in read-only mode\n" +msgstr " -r відкрити базу даних лише для читання\n" + +#: src/testgdbm.c:248 +#, c-format +msgid " -s synchronize to the disk after each write\n" +msgstr "" +" -s синхронізувати дані з диском після кожного запису\n" + +#: src/testgdbm.c:249 +#, c-format +msgid " -v print program version\n" +msgstr " -v вивести дані щодо версії програми\n" + +#: src/testgdbm.c:251 +#, c-format +msgid "Report bugs to <%s>.\n" +msgstr "Про вади слід повідомляти на адресу <%s>.\n" + +#: src/testgdbm.c:290 +#, c-format +msgid "cannot open file `%s' for reading: %s" +msgstr "не вдалося відкрити файл «%s» для читання: %s" + +#: src/testgdbm.c:301 +#, c-format +msgid "%s:%d: line too long" +msgstr "%s:%d: занадто довгий рядок" + +#: src/testgdbm.c:309 +#, c-format +msgid "%s:%d: malformed line" +msgstr "%s:%d: помилкове форматування рядка" + +#: src/testgdbm.c:320 +#, c-format +msgid "%d: item not inserted: %s" +msgstr "%d: пункт не вставлено: %s" + +#: src/testgdbm.c:379 +#, c-format +msgid "There is %d item in the database.\n" +msgid_plural "There are %d items in the database.\n" +msgstr[0] "У базі даних %d пункт.\n" +msgstr[1] "У базі даних %d пункти.\n" +msgstr[2] "У базі даних %d пунктів.\n" +msgstr[3] "У базі даних один пункт.\n" + +#: src/testgdbm.c:397 +#, c-format +msgid "Can't delete: %s" +msgstr "Не вдалося вилучити: %s" + +#: src/testgdbm.c:416 src/testgdbm.c:450 src/testgdbm.c:475 +#, c-format +msgid "No such item found.\n" +msgstr "Такого пункту не знайдено.\n" + +#: src/testgdbm.c:431 +#, c-format +msgid "Item not inserted.\n" +msgstr "Пункт не вставлено.\n" + +#: src/testgdbm.c:487 +#, c-format +msgid "Reorganization failed.\n" +msgstr "Спроба перевпорядкування завершилася невдало.\n" + +#: src/testgdbm.c:489 +#, c-format +msgid "Reorganization succeeded.\n" +msgstr "Успішне перевпорядкування.\n" + +#: src/testgdbm.c:521 +msgid "Current bucket" +msgstr "Поточна ділянка" + +#: src/testgdbm.c:522 +#, c-format +msgid "" +"\n" +" current directory entry = %d.\n" +msgstr "" +"\n" +" поточний запис каталогу = %d.\n" + +#: src/testgdbm.c:524 +#, c-format +msgid " current bucket address = %lu.\n" +msgstr " поточна адреса ділянки = %lu.\n" + +#: src/testgdbm.c:535 src/testgdbm.c:544 +#, c-format +msgid "not a number (stopped near %s)\n" +msgstr "не є числом (зупинка поблизу %s)\n" + +#: src/testgdbm.c:563 +#, c-format +msgid "Not a bucket.\n" +msgstr "Не є ділянкою.\n" + +#: src/testgdbm.c:588 +#, c-format +msgid "Hash table directory.\n" +msgstr "Каталог таблиці хешів.\n" + +#: src/testgdbm.c:589 +#, c-format +msgid "" +" Size = %d. Bits = %d. \n" +"\n" +msgstr "" +" Розмір = %d. Біти = %d. \n" +"\n" + +#: src/testgdbm.c:608 +#, c-format +msgid "" +"\n" +"File Header: \n" +"\n" +msgstr "" +"\n" +"Заголовок файла: \n" +"\n" + +#: src/testgdbm.c:609 +#, c-format +msgid " table = %lu\n" +msgstr " таблиця = %lu\n" + +#: src/testgdbm.c:611 +#, c-format +msgid " table size = %d\n" +msgstr " розм. таблиці= %d\n" + +#: src/testgdbm.c:612 +#, c-format +msgid " table bits = %d\n" +msgstr " біти таблиці = %d\n" + +#: src/testgdbm.c:613 +#, c-format +msgid " block size = %d\n" +msgstr " розмір блоку = %d\n" + +#: src/testgdbm.c:614 +#, c-format +msgid " bucket elems = %d\n" +msgstr " ел. у ділянці= %d\n" + +#: src/testgdbm.c:615 +#, c-format +msgid " bucket size = %d\n" +msgstr " розм. ділянки= %d\n" + +#: src/testgdbm.c:616 +#, c-format +msgid " header magic = %x\n" +msgstr " маг. ч. заг. = %x\n" + +#: src/testgdbm.c:617 +#, c-format +msgid " next block = %lu\n" +msgstr " наст. блок = %lu\n" + +#: src/testgdbm.c:619 +#, c-format +msgid " avail size = %d\n" +msgstr " дост. розмір = %d\n" + +#: src/testgdbm.c:620 +#, c-format +msgid " avail count = %d\n" +msgstr " дост. к-ть = %d\n" + +#: src/testgdbm.c:621 +#, c-format +msgid " avail nx blk = %lu\n" +msgstr " дост. н. блок.= %lu\n" + +#: src/testgdbm.c:633 +#, c-format +msgid "hash value = %x. \n" +msgstr "значення хешу = %x. \n" + +#: src/testgdbm.c:689 +#, c-format +msgid "cannot fetch data (key %.*s)" +msgstr "не вдалося отримати дані (ключ %.*s)" + +#: src/testgdbm.c:722 +#, c-format +msgid "gdbm_export failed, %s" +msgstr "помилка gdbm_export, %s" + +#: src/testgdbm.c:735 +#, c-format +msgid "gdbm_import failed, %s" +msgstr "помилка gdbm_import, %s" + +#: src/testgdbm.c:741 +msgid "yes" +msgstr "так" + +#: src/testgdbm.c:741 +msgid "no" +msgstr "ні" + +#: src/testgdbm.c:749 +#, c-format +msgid "Database file: %s\n" +msgstr "Файл бази даних: %s\n" + +#: src/testgdbm.c:750 src/testgdbm.c:760 +#, c-format +msgid "Zero terminated keys: %s\n" +msgstr "Ключі, що завершуються нулем: %s\n" + +#: src/testgdbm.c:751 +#, c-format +msgid "Zero terminated data: %s\n" +msgstr "Дані, що завершуються нулем: %s\n" + +#: src/testgdbm.c:792 +msgid "count (number of entries)" +msgstr "порахувати (кількість записів)" + +#: src/testgdbm.c:795 src/testgdbm.c:801 src/testgdbm.c:813 src/testgdbm.c:845 +msgid "key" +msgstr "ключ" + +#: src/testgdbm.c:795 +msgid "delete" +msgstr "вилучити" + +#: src/testgdbm.c:798 src/testgdbm.c:804 src/testgdbm.c:819 +msgid "file" +msgstr "файл" + +#: src/testgdbm.c:798 +msgid "export" +msgstr "експортувати" + +#: src/testgdbm.c:801 +msgid "fetch" +msgstr "отримати" + +#: src/testgdbm.c:804 +msgid "import" +msgstr "імпортувати" + +#: src/testgdbm.c:807 +msgid "list" +msgstr "список" + +#: src/testgdbm.c:810 +msgid "[key]" +msgstr "[ключ]" + +#: src/testgdbm.c:810 +msgid "nextkey" +msgstr "наступний ключ" + +#: src/testgdbm.c:813 +msgid "data" +msgstr "дані" + +#: src/testgdbm.c:813 +msgid "store" +msgstr "зберегти" + +#: src/testgdbm.c:816 +msgid "firstkey" +msgstr "перший ключ" + +#: src/testgdbm.c:820 +msgid "read entries from file and store" +msgstr "прочитати записи з файла і зберегти їх" + +#: src/testgdbm.c:823 +msgid "reorganize" +msgstr "перевпорядкувати" + +#: src/testgdbm.c:826 +msgid "toggle key nul-termination" +msgstr "увімкнути або вимкнути завершення ключів нуль-символом" + +#: src/testgdbm.c:829 +msgid "print avail list" +msgstr "показати список доступних" + +#: src/testgdbm.c:832 +msgid "bucket-number" +msgstr "ділянка-номер" + +#: src/testgdbm.c:832 +msgid "print a bucket" +msgstr "вивести ділянку" + +#: src/testgdbm.c:836 +msgid "print current bucket" +msgstr "вивести поточну ділянку" + +#: src/testgdbm.c:839 +msgid "print hash directory" +msgstr "вивести каталог хешів" + +#: src/testgdbm.c:842 +msgid "print file header" +msgstr "вивести заголовок файла" + +#: src/testgdbm.c:845 +msgid "hash value of key" +msgstr "хешувати значення ключа" + +#: src/testgdbm.c:848 +msgid "print the bucket cache" +msgstr "вивести ділянку кешу" + +#: src/testgdbm.c:851 +msgid "print current program status" +msgstr "вивести дані щодо поточного стану програми" + +#: src/testgdbm.c:854 +msgid "print version of gdbm" +msgstr "вивести дані щодо версії gdbm" + +#: src/testgdbm.c:857 +msgid "toggle data nul-termination" +msgstr "увімкнути або вимкнути завершення даних нуль-символом" + +#: src/testgdbm.c:860 +msgid "print this help list" +msgstr "вивести цей довідковий список" + +#: src/testgdbm.c:863 +msgid "quit the program" +msgstr "завершити роботу програми" + +#: src/testgdbm.c:1063 +#, c-format +msgid "-s is incompatible with -r" +msgstr "-s не можна використовувати разом з -r" + +#: src/testgdbm.c:1070 +#, c-format +msgid "-r is incompatible with -n" +msgstr "-r не можна використовувати разом з -n" + +#: src/testgdbm.c:1077 +#, c-format +msgid "-n is incompatible with -r" +msgstr "-n не можна використовувати разом з -r" + +#: src/testgdbm.c:1099 +#, c-format +msgid "unknown option; try `%s -h' for more info\n" +msgstr "невідомий параметр, віддайте команду «%s -h», щоб дізнатися більше\n" + +#: src/testgdbm.c:1123 +#, c-format +msgid "gdbm_open failed: %s" +msgstr "помилка gdbm_open: %s" + +#: src/testgdbm.c:1127 +#, c-format +msgid "gdbm_setopt failed: %s" +msgstr "помилка gdbm_setopt: %s" + +#: src/testgdbm.c:1133 +#, c-format +msgid "" +"\n" +"Welcome to the gdbm test program. Type ? for help.\n" +"\n" +msgstr "" +"\n" +"Ласкаво просимо до тестової програми gdbm. Введіть «?», щоб отримати " +"довідку.\n" +"\n" + +#: src/testgdbm.c:1166 +#, c-format +msgid "Invalid command. Try ? for help." +msgstr "" +"Некоректна команда. Віддайте команду «?», щоб ознайомитися зі списком команд." + +#: src/testgdbm.c:1167 +#, c-format +msgid "Unknown command" +msgstr "Невідома команда" + +#: src/testgdbm.c:1182 +#, fuzzy, c-format +msgid "%s: not enough arguments" +msgstr "%c: недостатньо аргументів" + +#: src/testgdbm.c:1187 +#, c-format +msgid "unexpected eof" +msgstr "неочікуваний символ кінця файла" + +#: src/testgdbm.c:1208 +#, c-format +msgid "cannot run pager `%s': %s" +msgstr "не вдалося запустити засіб поділу на сторінки «%s»: %s" + +#: src/update.c:110 +#, c-format +msgid "gdbm fatal: %s\n" +msgstr "критична помилка gdbm: %s\n" + +#~ msgid "read error" +#~ msgstr "помилка читання" + +#~ msgid "write error" +#~ msgstr "помилка запису" + +#~ msgid "nextkey on last key (from n, 1 or 2)" +#~ msgstr "наступний ключ для останнього ключа (від n, 1 або 2)" + +#~ msgid "Multicharacter commands are not yet implemented.\n" +#~ msgstr "Багатосимвольні команди ще не реалізовано.\n" diff --git a/src/Makefile.am b/src/Makefile.am new file mode 100644 index 0000000..1c55a4e --- /dev/null +++ b/src/Makefile.am @@ -0,0 +1,67 @@ +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . + +# Flags +AM_CPPFLAGS=-DIN_GDBM -DLOCALEDIR=\"$(localedir)\" + +# Headers +include_HEADERS = gdbm.h +noinst_HEADERS = \ + gdbmconst.h\ + gdbmdefs.h\ + gettext.h\ + proto.h\ + systems.h + +EXTRA_DIST = gdbm.h.in + +# The libraries +VI_CURRENT = 4 +VI_REVISION = 0 +VI_AGE = 0 + +lib_LTLIBRARIES = libgdbm.la +libgdbm_la_LIBADD = @LTLIBINTL@ + +libgdbm_la_SOURCES = \ + gdbmopen.c\ + gdbmdelete.c\ + gdbmfetch.c\ + gdbmstore.c\ + gdbmclose.c\ + gdbmreorg.c\ + gdbmseq.c\ + gdbmsync.c\ + gdbmerrno.c\ + gdbmexists.c\ + gdbmfdesc.c\ + gdbmsetopt.c\ + bucket.c\ + falloc.c\ + findkey.c\ + flatfile.c\ + fullio.c\ + hash.c\ + lock.c\ + mmap.c\ + update.c\ + version.c + +libgdbm_la_LDFLAGS = -version-info $(VI_CURRENT):$(VI_REVISION):$(VI_AGE) + +# Programs +bin_PROGRAMS = testgdbm +testgdbm_LDADD = ./libgdbm.la diff --git a/src/Makefile.in b/src/Makefile.in new file mode 100644 index 0000000..b03d5c1 --- /dev/null +++ b/src/Makefile.in @@ -0,0 +1,751 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# This file is part of GDBM. -*- Makefile -*- +# Copyright (C) 2007, 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . + + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +bin_PROGRAMS = testgdbm$(EXEEXT) +subdir = src +DIST_COMMON = $(include_HEADERS) $(noinst_HEADERS) \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(srcdir)/gdbm.h.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/autoconf.h +CONFIG_CLEAN_FILES = gdbm.h +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(includedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libgdbm_la_DEPENDENCIES = +am_libgdbm_la_OBJECTS = gdbmopen.lo gdbmdelete.lo gdbmfetch.lo \ + gdbmstore.lo gdbmclose.lo gdbmreorg.lo gdbmseq.lo gdbmsync.lo \ + gdbmerrno.lo gdbmexists.lo gdbmfdesc.lo gdbmsetopt.lo \ + bucket.lo falloc.lo findkey.lo flatfile.lo fullio.lo hash.lo \ + lock.lo mmap.lo update.lo version.lo +libgdbm_la_OBJECTS = $(am_libgdbm_la_OBJECTS) +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +libgdbm_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(libgdbm_la_LDFLAGS) $(LDFLAGS) -o $@ +PROGRAMS = $(bin_PROGRAMS) +testgdbm_SOURCES = testgdbm.c +testgdbm_OBJECTS = testgdbm.$(OBJEXT) +testgdbm_DEPENDENCIES = ./libgdbm.la +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(libgdbm_la_SOURCES) testgdbm.c +DIST_SOURCES = $(libgdbm_la_SOURCES) testgdbm.c +HEADERS = $(include_HEADERS) $(noinst_HEADERS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOM4TE = @AUTOM4TE@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GDBM183_INCLUDEDIR = @GDBM183_INCLUDEDIR@ +GDBM183_LIBDIR = @GDBM183_LIBDIR@ +GDBM183_LIBRARY = @GDBM183_LIBRARY@ +GDBM_VERSION_MAJOR = @GDBM_VERSION_MAJOR@ +GDBM_VERSION_MINOR = @GDBM_VERSION_MINOR@ +GDBM_VERSION_PATCH = @GDBM_VERSION_PATCH@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Flags +AM_CPPFLAGS = -DIN_GDBM -DLOCALEDIR=\"$(localedir)\" + +# Headers +include_HEADERS = gdbm.h +noinst_HEADERS = \ + gdbmconst.h\ + gdbmdefs.h\ + gettext.h\ + proto.h\ + systems.h + +EXTRA_DIST = gdbm.h.in + +# The libraries +VI_CURRENT = 4 +VI_REVISION = 0 +VI_AGE = 0 +lib_LTLIBRARIES = libgdbm.la +libgdbm_la_LIBADD = @LTLIBINTL@ +libgdbm_la_SOURCES = \ + gdbmopen.c\ + gdbmdelete.c\ + gdbmfetch.c\ + gdbmstore.c\ + gdbmclose.c\ + gdbmreorg.c\ + gdbmseq.c\ + gdbmsync.c\ + gdbmerrno.c\ + gdbmexists.c\ + gdbmfdesc.c\ + gdbmsetopt.c\ + bucket.c\ + falloc.c\ + findkey.c\ + flatfile.c\ + fullio.c\ + hash.c\ + lock.c\ + mmap.c\ + update.c\ + version.c + +libgdbm_la_LDFLAGS = -version-info $(VI_CURRENT):$(VI_REVISION):$(VI_AGE) +testgdbm_LDADD = ./libgdbm.la +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits src/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnits src/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +gdbm.h: $(top_builddir)/config.status $(srcdir)/gdbm.h.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +libgdbm.la: $(libgdbm_la_OBJECTS) $(libgdbm_la_DEPENDENCIES) + $(AM_V_CCLD)$(libgdbm_la_LINK) -rpath $(libdir) $(libgdbm_la_OBJECTS) $(libgdbm_la_LIBADD) $(LIBS) +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +installcheck-binPROGRAMS: $(bin_PROGRAMS) + bad=0; pid=$$$$; list="$(bin_PROGRAMS)"; for p in $$list; do \ + case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \ + *" $$p "* | *" $(srcdir)/$$p "*) continue;; \ + esac; \ + f=`echo "$$p" | \ + sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + for opt in --help --version; do \ + if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \ + 2>c$${pid}_.err &2; bad=1; fi; \ + done; \ + done; rm -f c$${pid}_.???; exit $$bad +testgdbm$(EXEEXT): $(testgdbm_OBJECTS) $(testgdbm_DEPENDENCIES) + @rm -f testgdbm$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(testgdbm_OBJECTS) $(testgdbm_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bucket.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/falloc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/findkey.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flatfile.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fullio.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmclose.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmdelete.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmerrno.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmexists.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmfdesc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmfetch.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmopen.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmreorg.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmseq.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmsetopt.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmstore.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbmsync.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lock.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mmap.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testgdbm.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/update.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Plo@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) + test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + done + +uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(includedir)" && rm -f $$files + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS) +install-binPROGRAMS: install-libLTLIBRARIES + +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-includeHEADERS + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: installcheck-binPROGRAMS + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic clean-libLTLIBRARIES clean-libtool ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-includeHEADERS install-info install-info-am \ + install-libLTLIBRARIES install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installcheck-binPROGRAMS installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am \ + uninstall-binPROGRAMS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/bucket.c b/src/bucket.c new file mode 100644 index 0000000..0c87759 --- /dev/null +++ b/src/bucket.c @@ -0,0 +1,319 @@ +/* bucket.c - The routines for playing with hash buckets. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + + +/* Initializing a new hash buckets sets all bucket entries to -1 hash value. */ +void +_gdbm_new_bucket (GDBM_FILE dbf, hash_bucket *bucket, int bits) +{ + int index; + + /* Initialize the avail block. */ + bucket->av_count = 0; + + /* Set the information fields first. */ + bucket->bucket_bits = bits; + bucket->count = 0; + + /* Initialize all bucket elements. */ + for (index = 0; index < dbf->header->bucket_elems; index++) + bucket->h_table[index].hash_value = -1; +} + + + +/* Find a bucket for DBF that is pointed to by the bucket directory from + location DIR_INDEX. The bucket cache is first checked to see if it + is already in memory. If not, a bucket may be tossed to read the new + bucket. In any case, the requested bucket is make the "current" bucket + and dbf->bucket points to the correct bucket. */ + +void +_gdbm_get_bucket (GDBM_FILE dbf, int dir_index) +{ + int rc; + off_t bucket_adr; /* The address of the correct hash bucket. */ + off_t file_pos; /* The return address for lseek. */ + int index; /* Loop index. */ + + /* Initial set up. */ + dbf->bucket_dir = dir_index; + bucket_adr = dbf->dir [dir_index]; + + if (dbf->bucket_cache == NULL) + { + if(_gdbm_init_cache(dbf, DEFAULT_CACHESIZE) == -1) + _gdbm_fatal(dbf, _("couldn't init cache")); + } + + /* Is that one is not already current, we must find it. */ + if (dbf->cache_entry->ca_adr != bucket_adr) + { + /* Look in the cache. */ + for (index = 0; index < dbf->cache_size; index++) + { + if (dbf->bucket_cache[index].ca_adr == bucket_adr) + { + dbf->bucket = dbf->bucket_cache[index].ca_bucket; + dbf->cache_entry = &dbf->bucket_cache[index]; + return; + } + } + + /* It is not in the cache, read it from the disk. */ + dbf->last_read = (dbf->last_read + 1) % dbf->cache_size; + if (dbf->bucket_cache[dbf->last_read].ca_changed) + _gdbm_write_bucket (dbf, &dbf->bucket_cache[dbf->last_read]); + dbf->bucket_cache[dbf->last_read].ca_adr = bucket_adr; + dbf->bucket = dbf->bucket_cache[dbf->last_read].ca_bucket; + dbf->cache_entry = &dbf->bucket_cache[dbf->last_read]; + dbf->cache_entry->ca_data.elem_loc = -1; + dbf->cache_entry->ca_changed = FALSE; + + /* Read the bucket. */ + file_pos = __lseek (dbf, bucket_adr, SEEK_SET); + if (file_pos != bucket_adr) + _gdbm_fatal (dbf, _("lseek error")); + + rc = _gdbm_full_read (dbf, dbf->bucket, dbf->header->bucket_size); + if (rc) + _gdbm_fatal (dbf, gdbm_strerror (rc)); + } + + return; +} + + +/* Split the current bucket. This includes moving all items in the bucket to + a new bucket. This doesn't require any disk reads because all hash values + are stored in the buckets. Splitting the current bucket may require + doubling the size of the hash directory. */ +void +_gdbm_split_bucket (GDBM_FILE dbf, int next_insert) +{ + hash_bucket *bucket[2]; /* Pointers to the new buckets. */ + + int new_bits; /* The number of bits for the new buckets. */ + int cache_0; /* Location in the cache for the buckets. */ + int cache_1; + off_t adr_0; /* File address of the new bucket 0. */ + off_t adr_1; /* File address of the new bucket 1. */ + avail_elem old_bucket; /* Avail Struct for the old bucket. */ + + off_t dir_start0; /* Used in updating the directory. */ + off_t dir_start1; + off_t dir_end; + + off_t *new_dir; /* Pointer to the new directory. */ + off_t dir_adr; /* Address of the new directory. */ + int dir_size; /* Size of the new directory. */ + off_t old_adr[31]; /* Address of the old directories. */ + int old_size[31]; /* Size of the old directories. */ + int old_count; /* Number of old directories. */ + + int index; /* Used in array indexing. */ + int index1; /* Used in array indexing. */ + int elem_loc; /* Location in new bucket to put element. */ + bucket_element *old_el; /* Pointer into the old bucket. */ + int select; /* Used to index bucket during movement. */ + + + /* No directories are yet old. */ + old_count = 0; + + if (dbf->bucket_cache == NULL) + { + if(_gdbm_init_cache(dbf, DEFAULT_CACHESIZE) == -1) + _gdbm_fatal(dbf, _("couldn't init cache")); + } + + while (dbf->bucket->count == dbf->header->bucket_elems) + { + /* Initialize the "new" buckets in the cache. */ + do + { + dbf->last_read = (dbf->last_read + 1) % dbf->cache_size; + cache_0 = dbf->last_read; + } + while (dbf->bucket_cache[cache_0].ca_bucket == dbf->bucket); + bucket[0] = dbf->bucket_cache[cache_0].ca_bucket; + if (dbf->bucket_cache[cache_0].ca_changed) + _gdbm_write_bucket (dbf, &dbf->bucket_cache[cache_0]); + do + { + dbf->last_read = (dbf->last_read + 1) % dbf->cache_size; + cache_1 = dbf->last_read; + } + while (dbf->bucket_cache[cache_1].ca_bucket == dbf->bucket); + bucket[1] = dbf->bucket_cache[cache_1].ca_bucket; + if (dbf->bucket_cache[cache_1].ca_changed) + _gdbm_write_bucket (dbf, &dbf->bucket_cache[cache_1]); + new_bits = dbf->bucket->bucket_bits+1; + _gdbm_new_bucket (dbf, bucket[0], new_bits); + _gdbm_new_bucket (dbf, bucket[1], new_bits); + adr_0 = _gdbm_alloc (dbf, dbf->header->bucket_size); + dbf->bucket_cache[cache_0].ca_adr = adr_0; + adr_1 = _gdbm_alloc (dbf, dbf->header->bucket_size); + dbf->bucket_cache[cache_1].ca_adr = adr_1; + + + + /* Double the directory size if necessary. */ + if (dbf->header->dir_bits == dbf->bucket->bucket_bits) + { + dir_size = dbf->header->dir_size * 2; + dir_adr = _gdbm_alloc (dbf, dir_size); + new_dir = (off_t *) malloc (dir_size); + if (new_dir == NULL) _gdbm_fatal (dbf, _("malloc error")); + for (index = 0; + index < dbf->header->dir_size/sizeof (off_t); index++) + { + new_dir[2*index] = dbf->dir[index]; + new_dir[2*index+1] = dbf->dir[index]; + } + + /* Update header. */ + old_adr[old_count] = dbf->header->dir; + dbf->header->dir = dir_adr; + old_size[old_count] = dbf->header->dir_size; + dbf->header->dir_size = dir_size; + dbf->header->dir_bits = new_bits; + old_count++; + + /* Now update dbf. */ + dbf->header_changed = TRUE; + dbf->bucket_dir *= 2; + free (dbf->dir); + dbf->dir = new_dir; + } + + /* Copy all elements in dbf->bucket into the new buckets. */ + for (index = 0; index < dbf->header->bucket_elems; index++) + { + old_el = & (dbf->bucket->h_table[index]); + select = (old_el->hash_value >> (31-new_bits)) & 1; + elem_loc = old_el->hash_value % dbf->header->bucket_elems; + while (bucket[select]->h_table[elem_loc].hash_value != -1) + elem_loc = (elem_loc + 1) % dbf->header->bucket_elems; + bucket[select]->h_table[elem_loc] = *old_el; + bucket[select]->count += 1; + } + + /* Allocate avail space for the bucket[1]. */ + bucket[1]->bucket_avail[0].av_adr + = _gdbm_alloc (dbf, dbf->header->block_size); + bucket[1]->bucket_avail[0].av_size = dbf->header->block_size; + bucket[1]->av_count = 1; + + /* Copy the avail elements in dbf->bucket to bucket[0]. */ + bucket[0]->av_count = dbf->bucket->av_count; + index = 0; + index1 = 0; + if (bucket[0]->av_count == BUCKET_AVAIL) + { + /* The avail is full, move the first one to bucket[1]. */ + _gdbm_put_av_elem (dbf->bucket->bucket_avail[0], + bucket[1]->bucket_avail, + &bucket[1]->av_count, FALSE); + index = 1; + bucket[0]->av_count --; + } + for (; index < dbf->bucket->av_count; index++) + { + bucket[0]->bucket_avail[index1++] = dbf->bucket->bucket_avail[index]; + } + + /* Update the directory. We have new file addresses for both buckets. */ + dir_start1 = (dbf->bucket_dir >> (dbf->header->dir_bits - new_bits)) | 1; + dir_end = (dir_start1 + 1) << (dbf->header->dir_bits - new_bits); + dir_start1 = dir_start1 << (dbf->header->dir_bits - new_bits); + dir_start0 = dir_start1 - (dir_end - dir_start1); + for (index = dir_start0; index < dir_start1; index++) + dbf->dir[index] = adr_0; + for (index = dir_start1; index < dir_end; index++) + dbf->dir[index] = adr_1; + + + /* Set changed flags. */ + dbf->bucket_cache[cache_0].ca_changed = TRUE; + dbf->bucket_cache[cache_1].ca_changed = TRUE; + dbf->bucket_changed = TRUE; + dbf->directory_changed = TRUE; + dbf->second_changed = TRUE; + + /* Update the cache! */ + dbf->bucket_dir = next_insert >> (31-dbf->header->dir_bits); + + /* Invalidate old cache entry. */ + old_bucket.av_adr = dbf->cache_entry->ca_adr; + old_bucket.av_size = dbf->header->bucket_size; + dbf->cache_entry->ca_adr = 0; + dbf->cache_entry->ca_changed = FALSE; + + /* Set dbf->bucket to the proper bucket. */ + if (dbf->dir[dbf->bucket_dir] == adr_0) + { + dbf->bucket = bucket[0]; + dbf->cache_entry = &dbf->bucket_cache[cache_0]; + _gdbm_put_av_elem (old_bucket, + bucket[1]->bucket_avail, + &bucket[1]->av_count, FALSE); + } + else + { + dbf->bucket = bucket[1]; + dbf->cache_entry = &dbf->bucket_cache[cache_1]; + _gdbm_put_av_elem (old_bucket, + bucket[0]->bucket_avail, + &bucket[0]->av_count, FALSE); + } + + } + + /* Get rid of old directories. */ + for (index = 0; index < old_count; index++) + _gdbm_free (dbf, old_adr[index], old_size[index]); +} + + +/* The only place where a bucket is written. CA_ENTRY is the + cache entry containing the bucket to be written. */ + +void +_gdbm_write_bucket (GDBM_FILE dbf, cache_elem *ca_entry) +{ + int rc; + off_t file_pos; /* The return value for lseek. */ + + file_pos = __lseek (dbf, ca_entry->ca_adr, SEEK_SET); + if (file_pos != ca_entry->ca_adr) + _gdbm_fatal (dbf, _("lseek error")); + rc = _gdbm_full_write (dbf, ca_entry->ca_bucket, dbf->header->bucket_size); + if (rc) + _gdbm_fatal (dbf, gdbm_strerror (rc)); + + ca_entry->ca_changed = FALSE; + ca_entry->ca_data.hash_val = -1; + ca_entry->ca_data.elem_loc = -1; +} diff --git a/src/falloc.c b/src/falloc.c new file mode 100644 index 0000000..560ccf8 --- /dev/null +++ b/src/falloc.c @@ -0,0 +1,470 @@ +/* falloc.c - The file space management routines for dbm. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 1994, 2007, 2011 Free Software + Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + + +/* The forward definitions for this file. See the functions for + the definition of the function. */ + +static avail_elem get_elem (int, avail_elem [], int *); +static avail_elem get_block (int, GDBM_FILE); +static void push_avail_block (GDBM_FILE); +static void pop_avail_block (GDBM_FILE); +static void adjust_bucket_avail (GDBM_FILE); + +/* Allocate space in the file DBF for a block NUM_BYTES in length. Return + the file address of the start of the block. + + Each hash bucket has a fixed size avail table. We first check this + avail table to satisfy the request for space. In most cases we can + and this causes changes to be only in the current hash bucket. + Allocation is done on a first fit basis from the entries. If a + request can not be satisfied from the current hash bucket, then it is + satisfied from the file header avail block. If nothing is there that + has enough space, another block at the end of the file is allocated + and the unused portion is returned to the avail block. This routine + "guarantees" that an allocation does not cross a block boundary unless + the size is larger than a single block. The avail structure is + changed by this routine if a change is needed. If an error occurs, + the value of 0 will be returned. */ + +off_t +_gdbm_alloc (GDBM_FILE dbf, int num_bytes) +{ + off_t file_adr; /* The address of the block. */ + avail_elem av_el; /* For temporary use. */ + + /* The current bucket is the first place to look for space. */ + av_el = get_elem (num_bytes, dbf->bucket->bucket_avail, + &dbf->bucket->av_count); + + /* If we did not find some space, we have more work to do. */ + if (av_el.av_size == 0) + { + /* If the header avail table is less than half full, and there's + something on the stack. */ + if ((dbf->header->avail.count <= (dbf->header->avail.size >> 1)) + && (dbf->header->avail.next_block != 0)) + pop_avail_block (dbf); + + /* check the header avail table next */ + av_el = get_elem (num_bytes, dbf->header->avail.av_table, + &dbf->header->avail.count); + if (av_el.av_size == 0) + /* Get another full block from end of file. */ + av_el = get_block (num_bytes, dbf); + + dbf->header_changed = TRUE; + } + + /* We now have the place from which we will allocate the new space. */ + file_adr = av_el.av_adr; + + /* Put the unused space back in the avail block. */ + av_el.av_adr += num_bytes; + av_el.av_size -= num_bytes; + _gdbm_free (dbf, av_el.av_adr, av_el.av_size); + + /* Return the address. */ + return file_adr; + +} + + + +/* Free space of size NUM_BYTES in the file DBF at file address FILE_ADR. Make + it avaliable for reuse through _gdbm_alloc. This routine changes the + avail structure. */ + +void +_gdbm_free (GDBM_FILE dbf, off_t file_adr, int num_bytes) +{ + avail_elem temp; + + /* Is it too small to worry about? */ + if (num_bytes <= IGNORE_SIZE) + return; + + /* Initialize the avail element. */ + temp.av_size = num_bytes; + temp.av_adr = file_adr; + + /* Is the freed space large or small? */ + if ((num_bytes >= dbf->header->block_size) || dbf->central_free) + { + if (dbf->header->avail.count == dbf->header->avail.size) + { + push_avail_block (dbf); + } + _gdbm_put_av_elem (temp, dbf->header->avail.av_table, + &dbf->header->avail.count, dbf->coalesce_blocks); + dbf->header_changed = TRUE; + } + else + { + /* Try to put into the current bucket. */ + if (dbf->bucket->av_count < BUCKET_AVAIL) + _gdbm_put_av_elem (temp, dbf->bucket->bucket_avail, + &dbf->bucket->av_count, dbf->coalesce_blocks); + else + { + if (dbf->header->avail.count == dbf->header->avail.size) + { + push_avail_block (dbf); + } + _gdbm_put_av_elem (temp, dbf->header->avail.av_table, + &dbf->header->avail.count, dbf->coalesce_blocks); + dbf->header_changed = TRUE; + } + } + + if (dbf->header_changed) + adjust_bucket_avail (dbf); + + /* All work is done. */ + return; +} + + + +/* The following are all utility routines needed by the previous two. */ + + +/* Gets the avail block at the top of the stack and loads it into the + active avail block. It does a "free" for itself! This can (and is) + now called even when the avail block is not empty, so we must be + smart about things. */ + +static void +pop_avail_block (GDBM_FILE dbf) +{ + int rc; + off_t file_pos; /* For use with the lseek system call. */ + avail_elem new_el; + avail_block *new_blk; + int index; + + if (dbf->header->avail.count == dbf->header->avail.size) + { + /* We're kind of stuck here, so we re-split the header in order to + avoid crashing. Sigh. */ + push_avail_block(dbf); + } + + /* Set up variables. */ + new_el.av_adr = dbf->header->avail.next_block; + new_el.av_size = ( ( (dbf->header->avail.size * sizeof (avail_elem)) >> 1) + + sizeof (avail_block)); + + /* Allocate space for the block. */ + new_blk = (avail_block *) malloc (new_el.av_size); + if (new_blk == NULL) _gdbm_fatal(dbf, _("malloc failed")); + + /* Read the block. */ + file_pos = __lseek (dbf, new_el.av_adr, SEEK_SET); + if (file_pos != new_el.av_adr) _gdbm_fatal (dbf, _("lseek error")); + rc = _gdbm_full_read (dbf, new_blk, new_el.av_size); + if (rc) + _gdbm_fatal (dbf, gdbm_strerror (rc)); + + /* Add the elements from the new block to the header. */ + index = 0; + while (index < new_blk->count) + { + while(index < new_blk->count + && dbf->header->avail.count < dbf->header->avail.size) + { + /* With luck, this will merge a lot of blocks! */ + _gdbm_put_av_elem(new_blk->av_table[index], + dbf->header->avail.av_table, + &dbf->header->avail.count, TRUE); + index++; + } + if (dbf->header->avail.count == dbf->header->avail.size) + { + /* We're kind of stuck here, so we re-split the header in order to + avoid crashing. Sigh. */ + push_avail_block(dbf); + } + } + + /* Fix next_block, as well. */ + dbf->header->avail.next_block = new_blk->next_block; + + /* We changed the header. */ + dbf->header_changed = TRUE; + + /* Free the previous avail block. It is possible that the header table + is now FULL, which will cause us to overflow it! */ + if (dbf->header->avail.count == dbf->header->avail.size) + { + /* We're kind of stuck here, so we re-split the header in order to + avoid crashing. Sigh. */ + push_avail_block(dbf); + } + + _gdbm_put_av_elem (new_el, dbf->header->avail.av_table, + &dbf->header->avail.count, TRUE); + free (new_blk); +} + + +/* Splits the header avail block and pushes half onto the avail stack. */ + +static void +push_avail_block (GDBM_FILE dbf) +{ + int av_size; + off_t av_adr; + int index; + off_t file_pos; + avail_block *temp; + avail_elem new_loc; + int rc; + + /* Caclulate the size of the split block. */ + av_size = ( (dbf->header->avail.size * sizeof (avail_elem)) >> 1) + + sizeof (avail_block); + + /* Get address in file for new av_size bytes. */ + new_loc = get_elem (av_size, dbf->header->avail.av_table, + &dbf->header->avail.count); + if (new_loc.av_size == 0) + new_loc = get_block (av_size, dbf); + av_adr = new_loc.av_adr; + + + /* Split the header block. */ + temp = (avail_block *) malloc (av_size); + if (temp == NULL) _gdbm_fatal (dbf, _("malloc error")); + /* Set the size to be correct AFTER the pop_avail_block. */ + temp->size = dbf->header->avail.size; + temp->count = 0; + temp->next_block = dbf->header->avail.next_block; + dbf->header->avail.next_block = av_adr; + for (index = 1; index < dbf->header->avail.count; index++) + if ( (index & 0x1) == 1) /* Index is odd. */ + temp->av_table[temp->count++] = dbf->header->avail.av_table[index]; + else + dbf->header->avail.av_table[index>>1] + = dbf->header->avail.av_table[index]; + + /* Update the header avail count to previous size divided by 2. */ + dbf->header->avail.count >>= 1; + + /* Free the unneeded space. */ + new_loc.av_adr += av_size; + new_loc.av_size -= av_size; + _gdbm_free (dbf, new_loc.av_adr, new_loc.av_size); + + /* Update the disk. */ + file_pos = __lseek (dbf, av_adr, SEEK_SET); + if (file_pos != av_adr) _gdbm_fatal (dbf, _("lseek error")); + rc = _gdbm_full_write (dbf, temp, av_size); + if (rc) + _gdbm_fatal (dbf, gdbm_strerror (rc)); + free (temp); +} + + + +/* Get_elem returns an element in the AV_TABLE block which is + larger than SIZE. AV_COUNT is the number of elements in the + AV_TABLE. If an item is found, it extracts it from the AV_TABLE + and moves the other elements up to fill the space. If no block is + found larger than SIZE, get_elem returns a size of zero. This + routine does no I/O. */ + +static avail_elem +get_elem (int size, avail_elem av_table[], int *av_count) +{ + int index; /* For searching through the avail block. */ + avail_elem val; /* The default return value. */ + + /* Initialize default return value. */ + val.av_adr = 0; + val.av_size = 0; + + /* Search for element. List is sorted by size. */ + index = 0; + while (index < *av_count && av_table[index].av_size < size) + { + index++; + } + + /* Did we find one of the right size? */ + if (index >= *av_count) + return val; + + /* Ok, save that element and move all others up one. */ + val = av_table[index]; + *av_count -= 1; + while (index < *av_count) + { + av_table[index] = av_table[index+1]; + index++; + } + + return val; +} + + +/* This routine inserts a single NEW_EL into the AV_TABLE block. + This routine does no I/O. */ + +int +_gdbm_put_av_elem (avail_elem new_el, avail_elem av_table[], int *av_count, + int can_merge) +{ + int index; /* For searching through the avail block. */ + int index1; + + /* Is it too small to deal with? */ + if (new_el.av_size <= IGNORE_SIZE) + return FALSE; + + if (can_merge == TRUE) + { + /* Search for blocks to coalesce with this one. */ + index = 0; + + while (index < *av_count) + { + /* Can we merge with the previous block? */ + if ((av_table[index].av_adr + + av_table[index].av_size) == new_el.av_adr) + { + /* Simply expand the endtry. */ + av_table[index].av_size += new_el.av_size; + } + /* Can we merge with the next block? */ + else if ((new_el.av_adr + + new_el.av_size) == av_table[index].av_adr) + { + /* Update this entry. */ + av_table[index].av_adr = new_el.av_adr; + av_table[index].av_size += new_el.av_size; + } + /* Not contiguous */ + else + { + index++; + continue; + } + + /* If we got here, we're done. */ + return TRUE; + } + } + + /* Search for place to put element. List is sorted by size. */ + index = 0; + while (index < *av_count && av_table[index].av_size < new_el.av_size) + { + index++; + } + + /* Move all others up one. */ + index1 = *av_count-1; + while (index1 >= index) + { + av_table[index1+1] = av_table[index1]; + index1--; + } + + /* Add the new element. */ + av_table[index] = new_el; + + /* Increment the number of elements. */ + *av_count += 1; + + return TRUE; +} + + + + + +/* Get_block "allocates" new file space and the end of the file. This is + done in integral block sizes. (This helps insure that data smaller than + one block size is in a single block.) Enough blocks are allocated to + make sure the number of bytes allocated in the blocks is larger than SIZE. + DBF contains the file header that needs updating. This routine does + no I/O. */ + +static avail_elem +get_block (int size, GDBM_FILE dbf) +{ + avail_elem val; + + /* Need at least one block. */ + val.av_adr = dbf->header->next_block; + val.av_size = dbf->header->block_size; + + /* Get enough blocks to fit the need. */ + while (val.av_size < size) + val.av_size += dbf->header->block_size; + + /* Update the header and return. */ + dbf->header->next_block += val.av_size; + + /* We changed the header. */ + dbf->header_changed = TRUE; + + return val; + +} + + +/* When the header already needs writing, we can make sure the current + bucket has its avail block as close to 1/3 full as possible. */ +static void +adjust_bucket_avail (GDBM_FILE dbf) +{ + int third = BUCKET_AVAIL / 3; + avail_elem av_el; + + /* Can we add more entries to the bucket? */ + if (dbf->bucket->av_count < third) + { + if (dbf->header->avail.count > 0) + { + dbf->header->avail.count -= 1; + av_el = dbf->header->avail.av_table[dbf->header->avail.count]; + _gdbm_put_av_elem (av_el, dbf->bucket->bucket_avail, + &dbf->bucket->av_count, dbf->coalesce_blocks); + dbf->bucket_changed = TRUE; + } + return; + } + + /* Is there too much in the bucket? */ + while (dbf->bucket->av_count > BUCKET_AVAIL-third + && dbf->header->avail.count < dbf->header->avail.size) + { + av_el = get_elem (0, dbf->bucket->bucket_avail, &dbf->bucket->av_count); + _gdbm_put_av_elem (av_el, dbf->header->avail.av_table, + &dbf->header->avail.count, dbf->coalesce_blocks); + dbf->bucket_changed = TRUE; + } +} diff --git a/src/findkey.c b/src/findkey.c new file mode 100644 index 0000000..d6a6781 --- /dev/null +++ b/src/findkey.c @@ -0,0 +1,145 @@ +/* findkey.c - The routine that finds a key entry in the file. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + + +/* Read the data found in bucket entry ELEM_LOC in file DBF and + return a pointer to it. Also, cache the read value. */ + +char * +_gdbm_read_entry (GDBM_FILE dbf, int elem_loc) +{ + int rc; + int key_size; + int data_size; + off_t file_pos; + data_cache_elem *data_ca; + + /* Is it already in the cache? */ + if (dbf->cache_entry->ca_data.elem_loc == elem_loc) + return dbf->cache_entry->ca_data.dptr; + + /* Set sizes and pointers. */ + key_size = dbf->bucket->h_table[elem_loc].key_size; + data_size = dbf->bucket->h_table[elem_loc].data_size; + data_ca = &dbf->cache_entry->ca_data; + + /* Set up the cache. */ + if (data_ca->dptr != NULL) free (data_ca->dptr); + data_ca->key_size = key_size; + data_ca->data_size = data_size; + data_ca->elem_loc = elem_loc; + data_ca->hash_val = dbf->bucket->h_table[elem_loc].hash_value; + if (key_size+data_size == 0) + data_ca->dptr = (char *) malloc (1); + else + data_ca->dptr = (char *) malloc (key_size+data_size); + if (data_ca->dptr == NULL) _gdbm_fatal (dbf, _("malloc error")); + + + /* Read into the cache. */ + file_pos = __lseek (dbf, dbf->bucket->h_table[elem_loc].data_pointer, + SEEK_SET); + if (file_pos != dbf->bucket->h_table[elem_loc].data_pointer) + _gdbm_fatal (dbf, _("lseek error")); + rc = _gdbm_full_read (dbf, data_ca->dptr, key_size+data_size); + if (rc) + _gdbm_fatal (dbf, gdbm_strerror (rc)); + + return data_ca->dptr; +} + + + +/* Find the KEY in the file and get ready to read the associated data. The + return value is the location in the current hash bucket of the KEY's + entry. If it is found, a pointer to the data and the key are returned + in DPTR. If it is not found, the value -1 is returned. Since find + key computes the hash value of key, that value */ +int +_gdbm_findkey (GDBM_FILE dbf, datum key, char **dptr, int *new_hash_val) +{ + int bucket_hash_val; /* The hash value from the bucket. */ + char *file_key; /* The complete key as stored in the file. */ + int elem_loc; /* The location in the bucket. */ + int home_loc; /* The home location in the bucket. */ + int key_size; /* Size of the key on the file. */ + + /* Compute hash value and load proper bucket. */ + *new_hash_val = _gdbm_hash (key); + _gdbm_get_bucket (dbf, *new_hash_val>> (31-dbf->header->dir_bits)); + + /* Is the element the last one found for this bucket? */ + if (dbf->cache_entry->ca_data.elem_loc != -1 + && *new_hash_val == dbf->cache_entry->ca_data.hash_val + && dbf->cache_entry->ca_data.key_size == key.dsize + && dbf->cache_entry->ca_data.dptr != NULL + && memcmp (dbf->cache_entry->ca_data.dptr, key.dptr, key.dsize) == 0) + { + /* This is it. Return the cache pointer. */ + *dptr = dbf->cache_entry->ca_data.dptr+key.dsize; + return dbf->cache_entry->ca_data.elem_loc; + } + + /* It is not the cached value, search for element in the bucket. */ + elem_loc = *new_hash_val % dbf->header->bucket_elems; + home_loc = elem_loc; + bucket_hash_val = dbf->bucket->h_table[elem_loc].hash_value; + while (bucket_hash_val != -1) + { + key_size = dbf->bucket->h_table[elem_loc].key_size; + if (bucket_hash_val != *new_hash_val + || key_size != key.dsize + || memcmp (dbf->bucket->h_table[elem_loc].key_start, key.dptr, + (SMALL < key_size ? SMALL : key_size)) != 0) + { + /* Current elem_loc is not the item, go to next item. */ + elem_loc = (elem_loc + 1) % dbf->header->bucket_elems; + if (elem_loc == home_loc) return -1; + bucket_hash_val = dbf->bucket->h_table[elem_loc].hash_value; + } + else + { + /* This may be the one we want. + The only way to tell is to read it. */ + file_key = _gdbm_read_entry (dbf, elem_loc); + if (memcmp (file_key, key.dptr, key_size) == 0) + { + /* This is the item. */ + *dptr = file_key+key.dsize; + return elem_loc; + } + else + { + /* Not the item, try the next one. Return if not found. */ + elem_loc = (elem_loc + 1) % dbf->header->bucket_elems; + if (elem_loc == home_loc) return -1; + bucket_hash_val = dbf->bucket->h_table[elem_loc].hash_value; + } + } + } + + /* If we get here, we never found the key. */ + return -1; + +} diff --git a/src/flatfile.c b/src/flatfile.c new file mode 100644 index 0000000..c0f9422 --- /dev/null +++ b/src/flatfile.c @@ -0,0 +1,246 @@ +/* flatfile.c - Import/export a GDBM database. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 2007, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +#ifndef _GDBMEXPORT_ + +/* Include system configuration before all else. */ +# include "autoconf.h" +# include + +# include "gdbmdefs.h" +# include "gdbm.h" + +#endif + +int +gdbm_export (GDBM_FILE dbf, const char *exportfile, int flags, int mode) +{ + int nfd, size; + datum key, nextkey, data; + const char *header1 = "!\r\n! GDBM FLAT FILE DUMP -- THIS IS NOT A TEXT FILE\r\n! "; + const char *header2 = "\r\n!\r\n"; + int count = 0; + + /* Only support GDBM_WCREAT or GDBM_NEWDB */ + switch (flags) + { + case GDBM_WRCREAT: + nfd = open (exportfile, O_WRONLY | O_CREAT | O_EXCL, mode); + if (nfd == -1) + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; + return -1; + } + break; + case GDBM_NEWDB: + nfd = open (exportfile, O_WRONLY | O_CREAT | O_TRUNC, mode); + if (nfd == -1) + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; + return -1; + } + break; + default: +#ifdef GDBM_BAD_OPEN_FLAGS + gdbm_errno = GDBM_BAD_OPEN_FLAGS; +#else + gdbm_errno = GDBM_FILE_OPEN_ERROR; +#endif + return -1; + } + + /* Write out the text header. */ + if (write (nfd, header1, strlen (header1)) != strlen (header1)) + goto write_fail; + if (write (nfd, gdbm_version, strlen (gdbm_version)) != strlen (gdbm_version)) + goto write_fail; + if (write (nfd, header2, strlen (header2)) != strlen (header2)) + goto write_fail; + + /* For each item in the database, write out a record to the file. */ + key = gdbm_firstkey (dbf); + + while (key.dptr != NULL) + { + data = gdbm_fetch (dbf, key); + if (data.dptr != NULL) + { + /* Add the data to the new file. */ + size = htonl (key.dsize); + if (write (nfd, &size, sizeof(int)) != sizeof (int)) + goto write_fail; + if (write (nfd, key.dptr, key.dsize) != key.dsize) + goto write_fail; + + size = htonl (data.dsize); + if (write (nfd, &size, sizeof(int)) != sizeof (int)) + goto write_fail; + if (write (nfd, data.dptr, data.dsize) != data.dsize) + goto write_fail; + } + nextkey = gdbm_nextkey (dbf, key); + free (key.dptr); + free (data.dptr); + key = nextkey; + + count++; + } + close (nfd); + + return count; + + write_fail: + + gdbm_errno = GDBM_FILE_WRITE_ERROR; + return -1; +} + +#ifndef _GDBMEXPORT_ + +int +gdbm_import (GDBM_FILE dbf, const char *importfile, int flag) +{ + int ifd, seenbang, seennewline, rsize, size, kbufsize, dbufsize, rret; + char c, *kbuffer, *dbuffer; + datum key, data; + int count = 0; + + ifd = open (importfile, O_RDONLY, 0); + if (ifd == -1) + { + gdbm_errno = GDBM_FILE_OPEN_ERROR; + return -1; + } + + seenbang = 0; + seennewline = 0; + kbuffer = NULL; + dbuffer = NULL; + + /* Read (and discard) four lines begining with ! and ending with \n. */ + while (1) + { + if (read (ifd, &c, 1) != 1) + goto read_fail; + + if (c == '!') + seenbang++; + if (c == '\n') + { + if (seenbang > 3 && seennewline > 2) + { + /* End of last line. */ + break; + } + seennewline++; + } + } + + /* Allocate buffers. */ + kbufsize = 512; + kbuffer = malloc (kbufsize); + if (kbuffer == NULL) + { + gdbm_errno = GDBM_MALLOC_ERROR; + close (ifd); + return -1; + } + dbufsize = 512; + dbuffer = malloc (dbufsize); + if (dbuffer == NULL) + { + gdbm_errno = GDBM_MALLOC_ERROR; + close (ifd); + return -1; + } + + /* Insert/replace records in the database until we run out of file. */ + while ((rret = read (ifd, &rsize, sizeof(rsize))) != 0) + { + if (rret != sizeof(rsize)) + goto read_fail; + + /* Read the key. */ + size = ntohl (rsize); + if (size > kbufsize) + { + kbufsize = (size + 512); + kbuffer = realloc (kbuffer, kbufsize); + if (kbuffer == NULL) + { + gdbm_errno = GDBM_MALLOC_ERROR; + close (ifd); + return -1; + } + } + if (read (ifd, kbuffer, size) != size) + goto read_fail; + + key.dptr = kbuffer; + key.dsize = size; + + /* Read the data. */ + if (read (ifd, &rsize, sizeof(rsize)) != sizeof(rsize)) + goto read_fail; + + size = ntohl (rsize); + if (size > dbufsize) + { + dbufsize = (size + 512); + dbuffer = realloc (dbuffer, dbufsize); + if (dbuffer == NULL) + { + gdbm_errno = GDBM_MALLOC_ERROR; + close (ifd); + return -1; + } + } + if (read (ifd, dbuffer, size) != size) + goto read_fail; + + data.dptr = dbuffer; + data.dsize = size; + + if (gdbm_store (dbf, key, data, flag) != 0) + { + /* Keep the existing errno. */ + free (kbuffer); + free (dbuffer); + close (ifd); + return -1; + } + + count++; + } + + close (ifd); + return count; + +read_fail: + + if (kbuffer != NULL) + free (kbuffer); + if (dbuffer != NULL) + free (dbuffer); + + close (ifd); + + gdbm_errno = GDBM_FILE_READ_ERROR; + return -1; +} +#endif diff --git a/src/fullio.c b/src/fullio.c new file mode 100644 index 0000000..9e401da --- /dev/null +++ b/src/fullio.c @@ -0,0 +1,70 @@ +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +#include "autoconf.h" +#include "gdbmdefs.h" + +/* Read exactly SIZE bytes of data into BUFFER. Return value is 0 on + success, GDBM_FILE_EOF, if not enough data is available, and + GDBM_FILE_READ_ERROR, if a read error occurs. In the latter case + errno keeps actual system error code. */ +int +_gdbm_full_read (GDBM_FILE dbf, void *buffer, size_t size) +{ + char *ptr = buffer; + while (size) + { + ssize_t rdbytes = __read (dbf, ptr, size); + if (rdbytes == -1) + { + if (errno == EINTR) + continue; + return GDBM_FILE_READ_ERROR; + } + if (rdbytes == 0) + return GDBM_FILE_EOF; + ptr += rdbytes; + size -= rdbytes; + } + return 0; +} + +/* Write exactly SIZE bytes of data from BUFFER tp DBF. Return 0 on + success, and GDBM_FILE_READ_ERROR on error. In the latter case errno + will keep actual system error code. */ +int +_gdbm_full_write (GDBM_FILE dbf, void *buffer, size_t size) +{ + char *ptr = buffer; + while (size) + { + ssize_t wrbytes = __write (dbf, ptr, size); + if (wrbytes == -1) + { + if (errno == EINTR) + continue; + return GDBM_FILE_WRITE_ERROR; + } + if (wrbytes == 0) + { + errno = ENOSPC; + return GDBM_FILE_WRITE_ERROR; + } + ptr += wrbytes; + size -= wrbytes; + } + return 0; +} diff --git a/src/gdbm.h b/src/gdbm.h new file mode 100644 index 0000000..1a5c9b8 --- /dev/null +++ b/src/gdbm.h @@ -0,0 +1,159 @@ +/* gdbm.h - The include file for dbm users. -*- c -*- */ + +/* This file is part of GDBM, the GNU data base manager, by Philip A. Nelson. + Copyright (C) 1990, 1991, 1993, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . + + You may contact the author by: + e-mail: phil@cs.wwu.edu + us-mail: Philip A. Nelson + Computer Science Department + Western Washington University + Bellingham, WA 98226 + +*************************************************************************/ + +/* Protection for multiple includes. */ +#ifndef _GDBM_H_ +# define _GDBM_H_ + +/* GDBM C++ support */ +# if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +# endif + +/* Parameters to gdbm_open for READERS, WRITERS, and WRITERS who + can create the database. */ +# define GDBM_READER 0 /* A reader. */ +# define GDBM_WRITER 1 /* A writer. */ +# define GDBM_WRCREAT 2 /* A writer. Create the db if needed. */ +# define GDBM_NEWDB 3 /* A writer. Always create a new db. */ +# define GDBM_OPENMASK 7 /* Mask for the above. */ + +# define GDBM_FAST 0x010 /* Write fast! => No fsyncs. OBSOLETE. */ +# define GDBM_SYNC 0x020 /* Sync operations to the disk. */ +# define GDBM_NOLOCK 0x040 /* Don't do file locking operations. */ +# define GDBM_NOMMAP 0x080 /* Don't use mmap(). */ +# define GDBM_CLOEXEC 0x100 /* Close the underlying fd on exec(3) */ + +/* Parameters to gdbm_store for simple insertion or replacement in the + case that the key is already in the database. */ +# define GDBM_INSERT 0 /* Never replace old data with new. */ +# define GDBM_REPLACE 1 /* Always replace old data with new. */ + +/* Parameters to gdbm_setopt, specifing the type of operation to perform. */ +# define GDBM_SETCACHESIZE 1 /* Set the cache size. */ +# define GDBM_FASTMODE 2 /* Toggle fast mode. OBSOLETE. */ +# define GDBM_SETSYNCMODE 3 /* Turn on or off sync operations. */ +# define GDBM_SETCENTFREE 4 /* Keep all free blocks in the header. */ +# define GDBM_SETCOALESCEBLKS 5 /* Attempt to coalesce free blocks. */ +# define GDBM_SETMAXMAPSIZE 6 /* Set maximum mapped memory size */ +# define GDBM_SETMMAP 7 /* Toggle mmap mode */ + +/* Compatibility defines: */ +# define GDBM_CACHESIZE GDBM_SETCACHESIZE +# define GDBM_SYNCMODE GDBM_SETSYNCMODE +# define GDBM_CENTFREE GDBM_SETCENTFREE +# define GDBM_COALESCEBLKS GDBM_SETCOALESCEBLKS + +# define GDBM_GETFLAGS 8 /* Get gdbm_open flags */ +# define GDBM_GETMMAP 9 /* Get mmap status */ +# define GDBM_GETCACHESIZE 10 /* Get current cache side */ +# define GDBM_GETSYNCMODE 11 /* Get synch mode */ +# define GDBM_GETCENTFREE 12 /* Get "centfree" status */ +# define GDBM_GETCOALESCEBLKS 13 /* Get free block coalesce status */ +# define GDBM_GETMAXMAPSIZE 14 /* Get maximum mapped memory size */ +# define GDBM_GETDBNAME 15 /* Return database file name */ + +/* The data and key structure. */ +typedef struct { + char *dptr; + int dsize; + } datum; + + +/* The file information header. This is good enough for most applications. */ +typedef struct gdbm_file_info *GDBM_FILE; + +/* External variable, the gdbm build release string. */ +extern const char *gdbm_version; + +# define GDBM_VERSION_MAJOR 1 +# define GDBM_VERSION_MINOR 10 +# define GDBM_VERSION_PATCH 0 + +extern int const gdbm_version_number[3]; + +/* GDBM external functions. */ + +extern GDBM_FILE gdbm_open (const char *, int, int, int, + void (*)(const char *)); +extern void gdbm_close (GDBM_FILE); +extern int gdbm_store (GDBM_FILE, datum, datum, int); +extern datum gdbm_fetch (GDBM_FILE, datum); +extern int gdbm_delete (GDBM_FILE, datum); +extern datum gdbm_firstkey (GDBM_FILE); +extern datum gdbm_nextkey (GDBM_FILE, datum); +extern int gdbm_reorganize (GDBM_FILE); +extern void gdbm_sync (GDBM_FILE); +extern int gdbm_exists (GDBM_FILE, datum); +extern int gdbm_setopt (GDBM_FILE, int, void *, int); +extern int gdbm_fdesc (GDBM_FILE); +extern int gdbm_export (GDBM_FILE, const char *, int, int); +extern int gdbm_import (GDBM_FILE, const char *, int); + +# define GDBM_NO_ERROR 0 +# define GDBM_MALLOC_ERROR 1 +# define GDBM_BLOCK_SIZE_ERROR 2 +# define GDBM_FILE_OPEN_ERROR 3 +# define GDBM_FILE_WRITE_ERROR 4 +# define GDBM_FILE_SEEK_ERROR 5 +# define GDBM_FILE_READ_ERROR 6 +# define GDBM_BAD_MAGIC_NUMBER 7 +# define GDBM_EMPTY_DATABASE 8 +# define GDBM_CANT_BE_READER 9 +# define GDBM_CANT_BE_WRITER 10 +# define GDBM_READER_CANT_DELETE 11 +# define GDBM_READER_CANT_STORE 12 +# define GDBM_READER_CANT_REORGANIZE 13 +# define GDBM_UNKNOWN_UPDATE 14 +# define GDBM_ITEM_NOT_FOUND 15 +# define GDBM_REORGANIZE_FAILED 16 +# define GDBM_CANNOT_REPLACE 17 +# define GDBM_ILLEGAL_DATA 18 +# define GDBM_OPT_ALREADY_SET 19 +# define GDBM_OPT_ILLEGAL 20 +# define GDBM_BYTE_SWAPPED 21 +# define GDBM_BAD_FILE_OFFSET 22 +# define GDBM_BAD_OPEN_FLAGS 23 +# define GDBM_FILE_STAT_ERROR 24 +# define GDBM_FILE_EOF 25 + +# define _GDBM_MIN_ERRNO 0 +# define _GDBM_MAX_ERRNO GDBM_FILE_EOF +typedef int gdbm_error; /* For compatibilities sake. */ +extern gdbm_error gdbm_errno; +extern const char * const gdbm_errlist[]; + +/* extra prototypes */ + +extern const char *gdbm_strerror (gdbm_error); +extern int gdbm_version_cmp (int const a[], int const b[]); + +# if defined(__cplusplus) || defined(c_plusplus) +} +# endif + +#endif diff --git a/src/gdbm.h.in b/src/gdbm.h.in new file mode 100644 index 0000000..21168de --- /dev/null +++ b/src/gdbm.h.in @@ -0,0 +1,159 @@ +/* gdbm.h - The include file for dbm users. -*- c -*- */ + +/* This file is part of GDBM, the GNU data base manager, by Philip A. Nelson. + Copyright (C) 1990, 1991, 1993, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . + + You may contact the author by: + e-mail: phil@cs.wwu.edu + us-mail: Philip A. Nelson + Computer Science Department + Western Washington University + Bellingham, WA 98226 + +*************************************************************************/ + +/* Protection for multiple includes. */ +#ifndef _GDBM_H_ +# define _GDBM_H_ + +/* GDBM C++ support */ +# if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +# endif + +/* Parameters to gdbm_open for READERS, WRITERS, and WRITERS who + can create the database. */ +# define GDBM_READER 0 /* A reader. */ +# define GDBM_WRITER 1 /* A writer. */ +# define GDBM_WRCREAT 2 /* A writer. Create the db if needed. */ +# define GDBM_NEWDB 3 /* A writer. Always create a new db. */ +# define GDBM_OPENMASK 7 /* Mask for the above. */ + +# define GDBM_FAST 0x010 /* Write fast! => No fsyncs. OBSOLETE. */ +# define GDBM_SYNC 0x020 /* Sync operations to the disk. */ +# define GDBM_NOLOCK 0x040 /* Don't do file locking operations. */ +# define GDBM_NOMMAP 0x080 /* Don't use mmap(). */ +# define GDBM_CLOEXEC 0x100 /* Close the underlying fd on exec(3) */ + +/* Parameters to gdbm_store for simple insertion or replacement in the + case that the key is already in the database. */ +# define GDBM_INSERT 0 /* Never replace old data with new. */ +# define GDBM_REPLACE 1 /* Always replace old data with new. */ + +/* Parameters to gdbm_setopt, specifing the type of operation to perform. */ +# define GDBM_SETCACHESIZE 1 /* Set the cache size. */ +# define GDBM_FASTMODE 2 /* Toggle fast mode. OBSOLETE. */ +# define GDBM_SETSYNCMODE 3 /* Turn on or off sync operations. */ +# define GDBM_SETCENTFREE 4 /* Keep all free blocks in the header. */ +# define GDBM_SETCOALESCEBLKS 5 /* Attempt to coalesce free blocks. */ +# define GDBM_SETMAXMAPSIZE 6 /* Set maximum mapped memory size */ +# define GDBM_SETMMAP 7 /* Toggle mmap mode */ + +/* Compatibility defines: */ +# define GDBM_CACHESIZE GDBM_SETCACHESIZE +# define GDBM_SYNCMODE GDBM_SETSYNCMODE +# define GDBM_CENTFREE GDBM_SETCENTFREE +# define GDBM_COALESCEBLKS GDBM_SETCOALESCEBLKS + +# define GDBM_GETFLAGS 8 /* Get gdbm_open flags */ +# define GDBM_GETMMAP 9 /* Get mmap status */ +# define GDBM_GETCACHESIZE 10 /* Get current cache side */ +# define GDBM_GETSYNCMODE 11 /* Get synch mode */ +# define GDBM_GETCENTFREE 12 /* Get "centfree" status */ +# define GDBM_GETCOALESCEBLKS 13 /* Get free block coalesce status */ +# define GDBM_GETMAXMAPSIZE 14 /* Get maximum mapped memory size */ +# define GDBM_GETDBNAME 15 /* Return database file name */ + +/* The data and key structure. */ +typedef struct { + char *dptr; + int dsize; + } datum; + + +/* The file information header. This is good enough for most applications. */ +typedef struct gdbm_file_info *GDBM_FILE; + +/* External variable, the gdbm build release string. */ +extern const char *gdbm_version; + +# define GDBM_VERSION_MAJOR @GDBM_VERSION_MAJOR@ +# define GDBM_VERSION_MINOR @GDBM_VERSION_MINOR@ +# define GDBM_VERSION_PATCH @GDBM_VERSION_PATCH@ + +extern int const gdbm_version_number[3]; + +/* GDBM external functions. */ + +extern GDBM_FILE gdbm_open (const char *, int, int, int, + void (*)(const char *)); +extern void gdbm_close (GDBM_FILE); +extern int gdbm_store (GDBM_FILE, datum, datum, int); +extern datum gdbm_fetch (GDBM_FILE, datum); +extern int gdbm_delete (GDBM_FILE, datum); +extern datum gdbm_firstkey (GDBM_FILE); +extern datum gdbm_nextkey (GDBM_FILE, datum); +extern int gdbm_reorganize (GDBM_FILE); +extern void gdbm_sync (GDBM_FILE); +extern int gdbm_exists (GDBM_FILE, datum); +extern int gdbm_setopt (GDBM_FILE, int, void *, int); +extern int gdbm_fdesc (GDBM_FILE); +extern int gdbm_export (GDBM_FILE, const char *, int, int); +extern int gdbm_import (GDBM_FILE, const char *, int); + +# define GDBM_NO_ERROR 0 +# define GDBM_MALLOC_ERROR 1 +# define GDBM_BLOCK_SIZE_ERROR 2 +# define GDBM_FILE_OPEN_ERROR 3 +# define GDBM_FILE_WRITE_ERROR 4 +# define GDBM_FILE_SEEK_ERROR 5 +# define GDBM_FILE_READ_ERROR 6 +# define GDBM_BAD_MAGIC_NUMBER 7 +# define GDBM_EMPTY_DATABASE 8 +# define GDBM_CANT_BE_READER 9 +# define GDBM_CANT_BE_WRITER 10 +# define GDBM_READER_CANT_DELETE 11 +# define GDBM_READER_CANT_STORE 12 +# define GDBM_READER_CANT_REORGANIZE 13 +# define GDBM_UNKNOWN_UPDATE 14 +# define GDBM_ITEM_NOT_FOUND 15 +# define GDBM_REORGANIZE_FAILED 16 +# define GDBM_CANNOT_REPLACE 17 +# define GDBM_ILLEGAL_DATA 18 +# define GDBM_OPT_ALREADY_SET 19 +# define GDBM_OPT_ILLEGAL 20 +# define GDBM_BYTE_SWAPPED 21 +# define GDBM_BAD_FILE_OFFSET 22 +# define GDBM_BAD_OPEN_FLAGS 23 +# define GDBM_FILE_STAT_ERROR 24 +# define GDBM_FILE_EOF 25 + +# define _GDBM_MIN_ERRNO 0 +# define _GDBM_MAX_ERRNO GDBM_FILE_EOF +typedef int gdbm_error; /* For compatibilities sake. */ +extern gdbm_error gdbm_errno; +extern const char * const gdbm_errlist[]; + +/* extra prototypes */ + +extern const char *gdbm_strerror (gdbm_error); +extern int gdbm_version_cmp (int const a[], int const b[]); + +# if defined(__cplusplus) || defined(c_plusplus) +} +# endif + +#endif diff --git a/src/gdbmclose.c b/src/gdbmclose.c new file mode 100644 index 0000000..7c32b56 --- /dev/null +++ b/src/gdbmclose.c @@ -0,0 +1,61 @@ +/* gdbmclose.c - Close a previously opened dbm file. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* Close the dbm file and free all memory associated with the file DBF. + Before freeing members of DBF, check and make sure that they were + allocated. */ + +void +gdbm_close (GDBM_FILE dbf) +{ + int index; /* For freeing the bucket cache. */ + + /* Make sure the database is all on disk. */ + if (dbf->read_write != GDBM_READER) + __fsync (dbf); + + /* Close the file and free all malloced memory. */ +#if HAVE_MMAP + _gdbm_mapped_unmap(dbf); +#endif + if (dbf->file_locking) + { + _gdbm_unlock_file (dbf); + } + close (dbf->desc); + free (dbf->name); + if (dbf->dir != NULL) free (dbf->dir); + + if (dbf->bucket_cache != NULL) { + for (index = 0; index < dbf->cache_size; index++) { + if (dbf->bucket_cache[index].ca_bucket != NULL) + free (dbf->bucket_cache[index].ca_bucket); + if (dbf->bucket_cache[index].ca_data.dptr != NULL) + free (dbf->bucket_cache[index].ca_data.dptr); + } + free (dbf->bucket_cache); + } + if ( dbf->header != NULL ) free (dbf->header); + free (dbf); +} diff --git a/src/gdbmconst.h b/src/gdbmconst.h new file mode 100644 index 0000000..0fb623e --- /dev/null +++ b/src/gdbmconst.h @@ -0,0 +1,52 @@ +/* gdbmconst.h - The constants defined for use in gdbm. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Start with the constant definitions. */ +#define TRUE 1 +#define FALSE 0 + +/* Header magic numbers. Since we don't have space for flags or versions, we + use different static numbers to determine what kind of file it is. + + This should've been done back when off_t was added to the library, but + alas... We just have to assume that an OMAGIC file is readable. */ + +#define GDBM_OMAGIC 0x13579ace /* Original magic number. */ +#define GDBM_MAGIC32 0x13579acd /* New 32bit magic number. */ +#define GDBM_MAGIC64 0x13579acf /* New 64bit magic number. */ + +#define GDBM_OMAGIC_SWAP 0xce9a5713 /* OMAGIC swapped. */ +#define GDBM_MAGIC32_SWAP 0xcd9a5713 /* MAGIC32 swapped. */ +#define GDBM_MAGIC64_SWAP 0xcf9a5713 /* MAGIC64 swapped. */ + +/* In freeing blocks, we will ignore any blocks smaller (and equal) to + IGNORE_SIZE number of bytes. */ +#define IGNORE_SIZE 4 + +/* The number of key bytes kept in a hash bucket. */ +#define SMALL 4 + +/* The number of bucket_avail entries in a hash bucket. */ +#define BUCKET_AVAIL 6 + +/* The size of the bucket cache. */ +#define DEFAULT_CACHESIZE 100 + +/* Maximum size representable by a size_t variable */ +#define SIZE_T_MAX ((size_t)-1) diff --git a/src/gdbmdefs.h b/src/gdbmdefs.h new file mode 100644 index 0000000..519d688 --- /dev/null +++ b/src/gdbmdefs.h @@ -0,0 +1,221 @@ +/* gdbmdefs.h - The include file for dbm. Defines structure and constants. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +#include "systems.h" +#include "gdbmconst.h" +#include "gdbm.h" +#define DEFAULT_TEXT_DOMAIN PACKAGE +#include "gettext.h" + +#define _(s) gettext (s) +#define N_(s) s + +/* The type definitions are next. */ + +/* The available file space is stored in an "avail" table. The one with + most activity is contained in the file header. (See below.) When that + one filles up, it is split in half and half is pushed on an "avail + stack." When the active avail table is empty and the "avail stack" is + not empty, the top of the stack is popped into the active avail table. */ + +/* The following structure is the element of the avaliable table. */ +typedef struct { + int av_size; /* The size of the available block. */ + off_t av_adr; /* The file address of the available block. */ + } avail_elem; + +/* This is the actual table. The in-memory images of the avail blocks are + allocated by malloc using a calculated size. */ +typedef struct { + int size; /* The number of avail elements in the table.*/ + int count; /* The number of entries in the table. */ + off_t next_block; /* The file address of the next avail block. */ + avail_elem av_table[1]; /* The table. Make it look like an array. */ + } avail_block; + +/* The dbm file header keeps track of the current location of the hash + directory and the free space in the file. */ + +typedef struct { + int header_magic; /* Version of file. */ + int block_size; /* The optimal i/o blocksize from stat. */ + off_t dir; /* File address of hash directory table. */ + int dir_size; /* Size in bytes of the table. */ + int dir_bits; /* The number of address bits used in the table.*/ + int bucket_size; /* Size in bytes of a hash bucket struct. */ + int bucket_elems; /* Number of elements in a hash bucket. */ + off_t next_block; /* The next unallocated block address. */ + avail_block avail; /* This must be last because of the psuedo + array in avail. This avail grows to fill + the entire block. */ + } gdbm_file_header; + + +/* The dbm hash bucket element contains the full 31 bit hash value, the + "pointer" to the key and data (stored together) with their sizes. It also + has a small part of the actual key value. It is used to verify the first + part of the key has the correct value without having to read the actual + key. */ + +typedef struct { + int hash_value; /* The complete 31 bit value. */ + char key_start[SMALL]; /* Up to the first SMALL bytes of the key. */ + off_t data_pointer; /* The file address of the key record. The + data record directly follows the key. */ + int key_size; /* Size of key data in the file. */ + int data_size; /* Size of associated data in the file. */ + } bucket_element; + + +/* A bucket is a small hash table. This one consists of a number of + bucket elements plus some bookkeeping fields. The number of elements + depends on the optimum blocksize for the storage device and on a + parameter given at file creation time. This bucket takes one block. + When one of these tables gets full, it is split into two hash buckets. + The contents are split between them by the use of the first few bits + of the 31 bit hash function. The location in a bucket is the hash + value modulo the size of the bucket. The in-memory images of the + buckets are allocated by malloc using a calculated size depending of + the file system buffer size. To speed up write, each bucket will have + BUCKET_AVAIL avail elements with the bucket. */ + +typedef struct { + int av_count; /* The number of bucket_avail entries. */ + avail_elem bucket_avail[BUCKET_AVAIL]; /* Distributed avail. */ + int bucket_bits; /* The number of bits used to get here. */ + int count; /* The number of element buckets full. */ + bucket_element h_table[1]; /* The table. Make it look like an array.*/ + } hash_bucket; + +/* We want to keep from reading buckets as much as possible. The following is + to implement a bucket cache. When full, buckets will be dropped in a + least recently read from disk order. */ + +/* To speed up fetching and "sequential" access, we need to implement a + data cache for key/data pairs read from the file. To find a key, we + must exactly match the key from the file. To reduce overhead, the + data will be read at the same time. Both key and data will be stored + in a data cache. Each bucket cached will have a one element data + cache. */ + +typedef struct { + int hash_val; + int data_size; + int key_size; + char *dptr; + int elem_loc; + } data_cache_elem; + +typedef struct { + hash_bucket * ca_bucket; + off_t ca_adr; + char ca_changed; /* Data in the bucket changed. */ + data_cache_elem ca_data; + } cache_elem; + +/* This final structure contains all main memory based information for + a gdbm file. This allows multiple gdbm files to be opened at the same + time by one program. */ + +struct gdbm_file_info { + /* Global variables and pointers to dynamic variables used by gdbm. */ + + /* The file name. */ + char *name; + + /* The reader/writer status. */ + unsigned read_write :2; + + /* Fast_write is set to 1 if no fsyncs are to be done. */ + unsigned fast_write :1; + + /* Central_free is set if all free blocks are kept in the header. */ + unsigned central_free :1; + + /* Coalesce_blocks is set if we should try to merge free blocks. */ + unsigned coalesce_blocks :1; + + /* Whether or not we should do file locking ourselves. */ + unsigned file_locking :1; + + /* Whether or not we're allowing mmap() use. */ + unsigned memory_mapping :1; + + /* Whether the database was open with GDBM_CLOEXEC flag */ + unsigned cloexec :1; + + /* Type of file locking in use. */ + enum { LOCKING_NONE = 0, LOCKING_FLOCK, LOCKING_LOCKF, + LOCKING_FCNTL } lock_type; + + /* The fatal error handling routine. */ + void (*fatal_err) (const char *); + + /* The gdbm file descriptor which is set in gdbm_open. */ + int desc; + + /* The file header holds information about the database. */ + gdbm_file_header *header; + + /* The hash table directory from extendible hashing. See Fagin et al, + ACM Trans on Database Systems, Vol 4, No 3. Sept 1979, 315-344 */ + off_t *dir; + + /* The bucket cache. */ + cache_elem *bucket_cache; + size_t cache_size; + int last_read; + + /* Points to the current hash bucket in the cache. */ + hash_bucket *bucket; + + /* The directory entry used to get the current hash bucket. */ + int bucket_dir; + + /* Pointer to the current bucket's cache entry. */ + cache_elem *cache_entry; + + /* Bookkeeping of things that need to be written back at the + end of an update. */ + unsigned header_changed :1; + unsigned directory_changed :1; + unsigned bucket_changed :1; + unsigned second_changed :1; + + /* Mmap info */ + size_t mapped_size_max;/* Max. allowed value for mapped_size */ + void *mapped_region; /* Mapped region */ + size_t mapped_size; /* Size of the region */ + off_t mapped_pos; /* Current offset in the region */ + off_t mapped_off; /* Position in the file where the region + begins */ + }; + +/* Execute CODE without clobbering errno */ +#define SAVE_ERRNO(code) \ + do \ + { \ + int __ec = errno; \ + code; \ + errno = __ec; \ + } \ + while (0) \ + +/* Now define all the routines in use. */ +#include "proto.h" diff --git a/src/gdbmdelete.c b/src/gdbmdelete.c new file mode 100644 index 0000000..331a286 --- /dev/null +++ b/src/gdbmdelete.c @@ -0,0 +1,106 @@ +/* gdbmdelete.c - Remove the key and its associated data from the database. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* Remove the KEYed item and the KEY from the database DBF. The file on disk + is updated to reflect the structure of the new database before returning + from this procedure. */ + +int +gdbm_delete (GDBM_FILE dbf, datum key) +{ + int elem_loc; /* The location in the current hash bucket. */ + int last_loc; /* Last location emptied by the delete. */ + int home; /* Home position of an item. */ + bucket_element elem; /* The element to be deleted. */ + char *find_data; /* Return pointer from findkey. */ + int hash_val; /* Returned by findkey. */ + off_t free_adr; /* Temporary stroage for address and size. */ + int free_size; + + /* First check to make sure this guy is a writer. */ + if (dbf->read_write == GDBM_READER) + { + gdbm_errno = GDBM_READER_CANT_DELETE; + return -1; + } + + /* Initialize the gdbm_errno variable. */ + gdbm_errno = GDBM_NO_ERROR; + + /* Find the item. */ + elem_loc = _gdbm_findkey (dbf, key, &find_data, &hash_val); + if (elem_loc == -1) + { + gdbm_errno = GDBM_ITEM_NOT_FOUND; + return -1; + } + + /* Save the element. */ + elem = dbf->bucket->h_table[elem_loc]; + + /* Delete the element. */ + dbf->bucket->h_table[elem_loc].hash_value = -1; + dbf->bucket->count -= 1; + + /* Move other elements to guarantee that they can be found. */ + last_loc = elem_loc; + elem_loc = (elem_loc + 1) % dbf->header->bucket_elems; + while (elem_loc != last_loc + && dbf->bucket->h_table[elem_loc].hash_value != -1) + { + home = dbf->bucket->h_table[elem_loc].hash_value + % dbf->header->bucket_elems; + if ( (last_loc < elem_loc && (home <= last_loc || home > elem_loc)) + || (last_loc > elem_loc && home <= last_loc && home > elem_loc)) + + { + dbf->bucket->h_table[last_loc] = dbf->bucket->h_table[elem_loc]; + dbf->bucket->h_table[elem_loc].hash_value = -1; + last_loc = elem_loc; + } + elem_loc = (elem_loc + 1) % dbf->header->bucket_elems; + } + + /* Free the file space. */ + free_adr = elem.data_pointer; + free_size = elem.key_size + elem.data_size; + _gdbm_free (dbf, free_adr, free_size); + + /* Set the flags. */ + dbf->bucket_changed = TRUE; + + /* Clear out the data cache for the current bucket. */ + if (dbf->cache_entry->ca_data.dptr != NULL) + { + free (dbf->cache_entry->ca_data.dptr); + dbf->cache_entry->ca_data.dptr = NULL; + } + dbf->cache_entry->ca_data.hash_val = -1; + dbf->cache_entry->ca_data.key_size = 0; + dbf->cache_entry->ca_data.elem_loc = -1; + + /* Do the writes. */ + _gdbm_end_update (dbf); + return 0; +} diff --git a/src/gdbmerrno.c b/src/gdbmerrno.c new file mode 100644 index 0000000..d9c5c3f --- /dev/null +++ b/src/gdbmerrno.c @@ -0,0 +1,70 @@ +/* gdbmerrno.c - convert gdbm errors into english. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1993, 2007, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* The dbm error number is placed in the variable GDBM_ERRNO. */ +gdbm_error gdbm_errno = GDBM_NO_ERROR; + +/* this is not static so that applications may access the array if they + like. it must be in the same order as the error codes! */ + +const char * const gdbm_errlist[_GDBM_MAX_ERRNO+1] = { + N_("No error"), /* GDBM_NO_ERROR */ + N_("Malloc error"), /* GDBM_MALLOC_ERROR */ + N_("Block size error"), /* GDBM_BLOCK_SIZE_ERROR */ + N_("File open error"), /* GDBM_FILE_OPEN_ERROR */ + N_("File write error"), /* GDBM_FILE_WRITE_ERROR */ + N_("File seek error"), /* GDBM_FILE_SEEK_ERROR */ + N_("File read error"), /* GDBM_FILE_READ_ERROR */ + N_("Bad magic number"), /* GDBM_BAD_MAGIC_NUMBER */ + N_("Empty database"), /* GDBM_EMPTY_DATABASE */ + N_("Can't be reader"), /* GDBM_CANT_BE_READER */ + N_("Can't be writer"), /* GDBM_CANT_BE_WRITER */ + N_("Reader can't delete"), /* GDBM_READER_CANT_DELETE */ + N_("Reader can't store"), /* GDBM_READER_CANT_STORE */ + N_("Reader can't reorganize"), /* GDBM_READER_CANT_REORGANIZE */ + N_("Unknown update"), /* GDBM_UNKNOWN_UPDATE */ + N_("Item not found"), /* GDBM_ITEM_NOT_FOUND */ + N_("Reorganize failed"), /* GDBM_REORGANIZE_FAILED */ + N_("Cannot replace"), /* GDBM_CANNOT_REPLACE */ + N_("Illegal data"), /* GDBM_ILLEGAL_DATA */ + N_("Option already set"), /* GDBM_OPT_ALREADY_SET */ + N_("Illegal option"), /* GDBM_OPT_ILLEGAL */ + N_("Byte-swapped file"), /* GDBM_BYTE_SWAPPED */ + N_("Wrong file offset"), /* GDBM_BAD_FILE_OFFSET */ + N_("Bad file flags"), /* GDBM_BAD_OPEN_FLAGS */ + N_("Cannot stat file"), /* GDBM_FILE_STAT_ERROR */ + N_("Unexpected end of file"), /* GDBM_FILE_EOF */ +}; + +const char * +gdbm_strerror (gdbm_error error) +{ + if (((int)error < _GDBM_MIN_ERRNO) || ((int)error > _GDBM_MAX_ERRNO)) + { + return _("Unknown error"); + } + else + { + return gettext (gdbm_errlist[(int)error]); + } +} diff --git a/src/gdbmexists.c b/src/gdbmexists.c new file mode 100644 index 0000000..631d1cf --- /dev/null +++ b/src/gdbmexists.c @@ -0,0 +1,34 @@ +/* gdbmexists.c - Check to see if a key exists */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1993, 2007, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* This is nothing more than a wrapper around _gdbm_findkey(). The + point? It doesn't alloate any memory. */ + +int +gdbm_exists (GDBM_FILE dbf, datum key) +{ + char *find_data; /* Dummy */ + int hash_val; /* Dummy */ + + return (_gdbm_findkey (dbf, key, &find_data, &hash_val) >= 0); +} diff --git a/src/gdbmfdesc.c b/src/gdbmfdesc.c new file mode 100644 index 0000000..2342a9d --- /dev/null +++ b/src/gdbmfdesc.c @@ -0,0 +1,30 @@ +/* gdbfdesc.c - return the file descriptor associated with the database. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1999, 2007, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* Return the file number of the DBF file. */ + +int +gdbm_fdesc(GDBM_FILE dbf) +{ + return (dbf->desc); +} diff --git a/src/gdbmfetch.c b/src/gdbmfetch.c new file mode 100644 index 0000000..9095d6d --- /dev/null +++ b/src/gdbmfetch.c @@ -0,0 +1,63 @@ +/* gdbmfetch.c - Find a key and return the associated data. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* Look up a given KEY and return the information associated with that KEY. + The pointer in the structure that is returned is a pointer to dynamically + allocated memory block. */ + +datum +gdbm_fetch (GDBM_FILE dbf, datum key) +{ + datum return_val; /* The return value. */ + int elem_loc; /* The location in the bucket. */ + char *find_data; /* Returned from find_key. */ + int hash_val; /* Returned from find_key. */ + + /* Set the default return value. */ + return_val.dptr = NULL; + return_val.dsize = 0; + + /* Initialize the gdbm_errno variable. */ + gdbm_errno = GDBM_NO_ERROR; + + /* Find the key and return a pointer to the data. */ + elem_loc = _gdbm_findkey (dbf, key, &find_data, &hash_val); + + /* Copy the data if the key was found. */ + if (elem_loc >= 0) + { + /* This is the item. Return the associated data. */ + return_val.dsize = dbf->bucket->h_table[elem_loc].data_size; + if (return_val.dsize == 0) + return_val.dptr = (char *) malloc (1); + else + return_val.dptr = (char *) malloc (return_val.dsize); + if (return_val.dptr == NULL) _gdbm_fatal (dbf, _("malloc error")); + memcpy (return_val.dptr, find_data, return_val.dsize); + } + + /* Check for an error and return. */ + if (return_val.dptr == NULL) gdbm_errno = GDBM_ITEM_NOT_FOUND; + return return_val; +} diff --git a/src/gdbmopen.c b/src/gdbmopen.c new file mode 100644 index 0000000..67db9c2 --- /dev/null +++ b/src/gdbmopen.c @@ -0,0 +1,475 @@ +/* gdbmopen.c - Open the dbm file and initialize data structures for use. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* Determine our native magic number and bail if we can't. */ +#if SIZEOF_OFF_T == 4 +# define GDBM_MAGIC GDBM_MAGIC32 +#elif SIZEOF_OFF_T == 8 +# define GDBM_MAGIC GDBM_MAGIC64 +#else +# error "Unsupported off_t size, contact GDBM maintainer. What crazy system is this?!?" +#endif + +/* Initialize dbm system. FILE is a pointer to the file name. If the file + has a size of zero bytes, a file initialization procedure is performed, + setting up the initial structure in the file. BLOCK_SIZE is used during + initialization to determine the size of various constructs. If the value + is less than 512, the file system blocksize is used, otherwise the value + of BLOCK_SIZE is used. BLOCK_SIZE is ignored if the file has previously + initialized. If FLAGS is set to GDBM_READ the user wants to just + read the database and any call to dbm_store or dbm_delete will fail. Many + readers can access the database at the same time. If FLAGS is set to + GDBM_WRITE, the user wants both read and write access to the database and + requires exclusive access. If FLAGS is GDBM_WRCREAT, the user wants + both read and write access to the database and if the database does not + exist, create a new one. If FLAGS is GDBM_NEWDB, the user want a + new database created, regardless of whether one existed, and wants read + and write access to the new database. Any error detected will cause a + return value of null and an approprate value will be in gdbm_errno. If + no errors occur, a pointer to the "gdbm file descriptor" will be + returned. */ + + +GDBM_FILE +gdbm_open (const char *file, int block_size, int flags, int mode, + void (*fatal_func) (const char *)) +{ + GDBM_FILE dbf; /* The record to return. */ + struct stat file_stat; /* Space for the stat information. */ + int len; /* Length of the file name. */ + off_t file_pos; /* Used with seeks. */ + int file_block_size; /* Block size to use for a new file. */ + int index; /* Used as a loop index. */ + char need_trunc; /* Used with GDBM_NEWDB and locking to avoid + truncating a file from under a reader. */ + int rc; /* temporary error code */ + int fbits = 0; /* additional bits for open(2) flags */ + + /* Initialize the gdbm_errno variable. */ + gdbm_errno = GDBM_NO_ERROR; + + /* Allocate new info structure. */ + dbf = (GDBM_FILE) malloc (sizeof (*dbf)); + if (dbf == NULL) + { + gdbm_errno = GDBM_MALLOC_ERROR; + return NULL; + } + + /* Initialize some fields for known values. This is done so gdbm_close + will work if called before allocating some structures. */ + dbf->dir = NULL; + dbf->bucket = NULL; + dbf->header = NULL; + dbf->bucket_cache = NULL; + dbf->cache_size = 0; + + dbf->memory_mapping = FALSE; + dbf->mapped_size_max = SIZE_T_MAX; + dbf->mapped_region = NULL; + dbf->mapped_size = 0; + dbf->mapped_pos = 0; + dbf->mapped_off = 0; + + /* Save name of file. */ + len = strlen (file); + dbf->name = (char *) malloc (len + 1); + if (dbf->name == NULL) + { + free (dbf); + gdbm_errno = GDBM_MALLOC_ERROR; + return NULL; + } + strcpy (dbf->name, file); + + /* Initialize the fatal error routine. */ + dbf->fatal_err = fatal_func; + + dbf->fast_write = TRUE; /* Default to setting fast_write. */ + dbf->file_locking = TRUE; /* Default to doing file locking. */ + dbf->central_free = FALSE; /* Default to not using central_free. */ + dbf->coalesce_blocks = FALSE; /* Default to not coalescing blocks. */ + + /* GDBM_FAST used to determine whether or not we set fast_write. */ + if (flags & GDBM_SYNC) + { + /* If GDBM_SYNC has been requested, don't do fast_write. */ + dbf->fast_write = FALSE; + } + if (flags & GDBM_NOLOCK) + { + dbf->file_locking = FALSE; + } + if (flags & GDBM_CLOEXEC) + { + fbits = O_CLOEXEC; + dbf->cloexec = TRUE; + } + else + dbf->cloexec = FALSE; + + /* Open the file. */ + need_trunc = FALSE; + switch (flags & GDBM_OPENMASK) + { + case GDBM_READER: + dbf->desc = open (dbf->name, O_RDONLY|fbits, 0); + break; + + case GDBM_WRITER: + dbf->desc = open (dbf->name, O_RDWR|fbits, 0); + break; + + case GDBM_NEWDB: + dbf->desc = open (dbf->name, O_RDWR|O_CREAT|fbits, mode); + need_trunc = TRUE; + break; + + default: + dbf->desc = open (dbf->name, O_RDWR|O_CREAT|fbits, mode); + break; + + } + if (dbf->desc < 0) + { + SAVE_ERRNO (free (dbf->name); + free (dbf)); + gdbm_errno = GDBM_FILE_OPEN_ERROR; + return NULL; + } + + /* Get the status of the file. */ + if (fstat (dbf->desc, &file_stat)) + { + SAVE_ERRNO (close (dbf->desc); + free (dbf->name); + free (dbf)); + gdbm_errno = GDBM_FILE_STAT_ERROR; + return NULL; + } + + /* Zero-length file can't be a reader... */ + if (((flags & GDBM_OPENMASK) == GDBM_READER) && (file_stat.st_size == 0)) + { + close (dbf->desc); + free (dbf->name); + free (dbf); + gdbm_errno = GDBM_EMPTY_DATABASE; + return NULL; + } + + /* Record the kind of user. */ + dbf->read_write = (flags & GDBM_OPENMASK); + + /* Lock the file in the appropriate way. */ + if (dbf->file_locking) + { + if (_gdbm_lock_file (dbf) == -1) + { + close (dbf->desc); + free (dbf->name); + free (dbf); + if ((flags & GDBM_OPENMASK) == GDBM_READER) + gdbm_errno = GDBM_CANT_BE_READER; + else + gdbm_errno = GDBM_CANT_BE_WRITER; + return NULL; + } + } + + /* If we do have a write lock and it was a GDBM_NEWDB, it is + now time to truncate the file. */ + if (need_trunc && file_stat.st_size != 0) + { + TRUNCATE (dbf); + fstat (dbf->desc, &file_stat); + } + + /* Decide if this is a new file or an old file. */ + if (file_stat.st_size == 0) + { + + /* This is a new file. Create an empty database. */ + + /* Start with the blocksize. */ + if (block_size < 512) + file_block_size = STATBLKSIZE; + else + file_block_size = block_size; + + /* Get space for the file header. It will be written to disk, so + make sure there's no garbage in it. */ + dbf->header = (gdbm_file_header *) calloc (1, file_block_size); + if (dbf->header == NULL) + { + gdbm_close (dbf); + gdbm_errno = GDBM_MALLOC_ERROR; + return NULL; + } + + /* Set the magic number and the block_size. */ + dbf->header->header_magic = GDBM_MAGIC; + dbf->header->block_size = file_block_size; + + /* Create the initial hash table directory. */ + dbf->header->dir_size = 8 * sizeof (off_t); + dbf->header->dir_bits = 3; + while (dbf->header->dir_size < dbf->header->block_size) + { + dbf->header->dir_size <<= 1; + dbf->header->dir_bits += 1; + } + + /* Check for correct block_size. */ + if (dbf->header->dir_size != dbf->header->block_size) + { + gdbm_close (dbf); + gdbm_errno = GDBM_BLOCK_SIZE_ERROR; + return NULL; + } + + /* Allocate the space for the directory. */ + dbf->dir = (off_t *) malloc (dbf->header->dir_size); + if (dbf->dir == NULL) + { + gdbm_close (dbf); + gdbm_errno = GDBM_MALLOC_ERROR; + return NULL; + } + dbf->header->dir = dbf->header->block_size; + + /* Create the first and only hash bucket. */ + dbf->header->bucket_elems = + (dbf->header->block_size - sizeof (hash_bucket)) + / sizeof (bucket_element) + 1; + dbf->header->bucket_size = dbf->header->block_size; + dbf->bucket = (hash_bucket *) malloc (dbf->header->bucket_size); + if (dbf->bucket == NULL) + { + gdbm_close (dbf); + gdbm_errno = GDBM_MALLOC_ERROR; + return NULL; + } + _gdbm_new_bucket (dbf, dbf->bucket, 0); + dbf->bucket->av_count = 1; + dbf->bucket->bucket_avail[0].av_adr = 3*dbf->header->block_size; + dbf->bucket->bucket_avail[0].av_size = dbf->header->block_size; + + /* Set table entries to point to hash buckets. */ + for (index = 0; index < dbf->header->dir_size / sizeof (off_t); index++) + dbf->dir[index] = 2*dbf->header->block_size; + + /* Initialize the active avail block. */ + dbf->header->avail.size + = ( (dbf->header->block_size - sizeof (gdbm_file_header)) + / sizeof (avail_elem)) + 1; + dbf->header->avail.count = 0; + dbf->header->avail.next_block = 0; + dbf->header->next_block = 4*dbf->header->block_size; + + /* Write initial configuration to the file. */ + /* Block 0 is the file header and active avail block. */ + rc = _gdbm_full_write (dbf, dbf->header, dbf->header->block_size); + if (rc) + { + SAVE_ERRNO (gdbm_close (dbf)); + gdbm_errno = rc; + return NULL; + } + + /* Block 1 is the initial bucket directory. */ + rc = _gdbm_full_write (dbf, dbf->dir, dbf->header->dir_size); + if (rc) + { + SAVE_ERRNO (gdbm_close (dbf)); + gdbm_errno = rc; + return NULL; + } + + /* Block 2 is the only bucket. */ + rc = _gdbm_full_write (dbf, dbf->bucket, dbf->header->bucket_size); + if (rc) + { + SAVE_ERRNO (gdbm_close (dbf)); + gdbm_errno = rc; + return NULL; + } + + /* Wait for initial configuration to be written to disk. */ + __fsync (dbf); + + free (dbf->bucket); + } + else + { + /* This is an old database. Read in the information from the file + header and initialize the hash directory. */ + + gdbm_file_header partial_header; /* For the first part of it. */ + + /* Read the partial file header. */ + rc = _gdbm_full_read (dbf, &partial_header, sizeof (gdbm_file_header)); + if (rc) + { + SAVE_ERRNO (gdbm_close (dbf)); + gdbm_errno = rc; + return NULL; + } + + /* Is the magic number good? */ + if (partial_header.header_magic != GDBM_MAGIC + && partial_header.header_magic != GDBM_OMAGIC) + { + gdbm_close (dbf); + switch (partial_header.header_magic) + { + case GDBM_OMAGIC_SWAP: + case GDBM_MAGIC32_SWAP: + case GDBM_MAGIC64_SWAP: + gdbm_errno = GDBM_BYTE_SWAPPED; + break; + case GDBM_MAGIC32: + case GDBM_MAGIC64: + gdbm_errno = GDBM_BAD_FILE_OFFSET; + break; + default: + gdbm_errno = GDBM_BAD_MAGIC_NUMBER; + } + return NULL; + } + + /* It is a good database, read the entire header. */ + dbf->header = (gdbm_file_header *) malloc (partial_header.block_size); + if (dbf->header == NULL) + { + gdbm_close (dbf); + gdbm_errno = GDBM_MALLOC_ERROR; + return NULL; + } + memcpy (dbf->header, &partial_header, sizeof (gdbm_file_header)); + rc = _gdbm_full_read (dbf, &dbf->header->avail.av_table[1], + dbf->header->block_size-sizeof (gdbm_file_header)); + if (rc) + { + SAVE_ERRNO (gdbm_close (dbf)); + gdbm_errno = rc; + return NULL; + } + + /* Allocate space for the hash table directory. */ + dbf->dir = (off_t *) malloc (dbf->header->dir_size); + if (dbf->dir == NULL) + { + gdbm_close (dbf); + gdbm_errno = GDBM_MALLOC_ERROR; + return NULL; + } + + /* Read the hash table directory. */ + file_pos = __lseek (dbf, dbf->header->dir, SEEK_SET); + if (file_pos != dbf->header->dir) + { + SAVE_ERRNO (gdbm_close (dbf)); + gdbm_errno = GDBM_FILE_SEEK_ERROR; + return NULL; + } + + rc = _gdbm_full_read (dbf, dbf->dir, dbf->header->dir_size); + if (rc) + { + SAVE_ERRNO (gdbm_close (dbf)); + gdbm_errno = rc; + return NULL; + } + + } + +#if HAVE_MMAP + if (!(flags & GDBM_NOMMAP)) + { + if (_gdbm_mapped_init (dbf) == 0) + dbf->memory_mapping = TRUE; + else + { + /* gdbm_errno should already be set. */ + close (dbf->desc); + free (dbf->name); + free (dbf); + return NULL; + } + } +#endif + + /* Finish initializing dbf. */ + dbf->last_read = -1; + dbf->bucket = NULL; + dbf->bucket_dir = 0; + dbf->cache_entry = NULL; + dbf->header_changed = FALSE; + dbf->directory_changed = FALSE; + dbf->bucket_changed = FALSE; + dbf->second_changed = FALSE; + + /* Everything is fine, return the pointer to the file + information structure. */ + return dbf; + +} + +/* Initialize the bucket cache. */ +int +_gdbm_init_cache(GDBM_FILE dbf, size_t size) +{ + int index; + + if (dbf->bucket_cache == NULL) + { + dbf->bucket_cache = (cache_elem *) malloc(sizeof(cache_elem) * size); + if(dbf->bucket_cache == NULL) + { + gdbm_errno = GDBM_MALLOC_ERROR; + return -1; + } + dbf->cache_size = size; + + for(index = 0; index < size; index++) + { + (dbf->bucket_cache[index]).ca_bucket + = (hash_bucket *) malloc (dbf->header->bucket_size); + if ((dbf->bucket_cache[index]).ca_bucket == NULL) + { + gdbm_errno = GDBM_MALLOC_ERROR; + return -1; + } + (dbf->bucket_cache[index]).ca_adr = 0; + (dbf->bucket_cache[index]).ca_changed = FALSE; + (dbf->bucket_cache[index]).ca_data.hash_val = -1; + (dbf->bucket_cache[index]).ca_data.elem_loc = -1; + (dbf->bucket_cache[index]).ca_data.dptr = NULL; + } + dbf->bucket = dbf->bucket_cache[0].ca_bucket; + dbf->cache_entry = &dbf->bucket_cache[0]; + } + return 0; +} diff --git a/src/gdbmreorg.c b/src/gdbmreorg.c new file mode 100644 index 0000000..cc2a929 --- /dev/null +++ b/src/gdbmreorg.c @@ -0,0 +1,218 @@ +/* gdbmreorg.c - Reorganize the database file. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +#if !HAVE_RENAME + +/* Rename takes OLD_NAME and renames it as NEW_NAME. If it can not rename + the file a non-zero value is returned. OLD_NAME is guaranteed to + remain if it can't be renamed. It assumes NEW_NAME always exists (due + to being used in gdbm). */ + +static int +_gdbm_rename (char *old_name, char *new_name) +{ + if (unlink (new_name) != 0) + return -1; + + if (link (old_name, new_name) != 0) + return -1; + + unlink (old_name); + return 0; + +} + +# define rename _gdbm_rename +#endif + + + +/* Reorganize the database. This requires creating a new file and inserting + all the elements in the old file DBF into the new file. The new file + is then renamed to the same name as the old file and DBF is updated to + contain all the correct information about the new file. If an error + is detected, the return value is negative. The value zero is returned + after a successful reorganization. */ + +int +gdbm_reorganize (GDBM_FILE dbf) +{ + GDBM_FILE new_dbf; /* The new file. */ + char *new_name; /* A temporary name. */ + int len; /* Used in new_name construction. */ + datum key, nextkey, data; /* For the sequential sweep. */ + struct stat fileinfo; /* Information about the file. */ + int index; /* Use in moving the bucket cache. */ + + + /* Readers can not reorganize! */ + if (dbf->read_write == GDBM_READER) + { + gdbm_errno = GDBM_READER_CANT_REORGANIZE; + return -1; + } + + /* Get the mode for the old file */ + if (fstat (dbf->desc, &fileinfo)) + { + gdbm_errno = GDBM_FILE_STAT_ERROR; + return -1; + } + + /* Initialize the gdbm_errno variable. */ + gdbm_errno = GDBM_NO_ERROR; + + /* Construct new name for temporary file. */ + len = strlen (dbf->name); + new_name = (char *) malloc (len + 3); + if (new_name == NULL) + { + gdbm_errno = GDBM_MALLOC_ERROR; + return -1; + } + strcpy (&new_name[0], dbf->name); + new_name[len+2] = 0; + new_name[len+1] = '#'; + while ( (len > 0) && new_name[len-1] != '/') + { + new_name[len] = new_name[len-1]; + len -= 1; + } + new_name[len] = '#'; + + /* Open the new database. */ + new_dbf = gdbm_open (new_name, dbf->header->block_size, + GDBM_WRCREAT | (dbf->cloexec ? GDBM_CLOEXEC : 0), + fileinfo.st_mode, dbf->fatal_err); + + if (new_dbf == NULL) + { + free (new_name); + gdbm_errno = GDBM_REORGANIZE_FAILED; + return -1; + } + + + /* For each item in the old database, add an entry in the new. */ + key = gdbm_firstkey (dbf); + + while (key.dptr != NULL) + { + data = gdbm_fetch (dbf, key); + if (data.dptr != NULL) + { + /* Add the data to the new file. */ + if (gdbm_store (new_dbf, key, data, GDBM_INSERT) != 0) + { + gdbm_close (new_dbf); + gdbm_errno = GDBM_REORGANIZE_FAILED; + unlink (new_name); + free (new_name); + return -1; + } + } + else + { + /* ERROR! Abort and don't finish reorganize. */ + gdbm_close (new_dbf); + gdbm_errno = GDBM_REORGANIZE_FAILED; + unlink (new_name); + free (new_name); + return -1; + } + nextkey = gdbm_nextkey (dbf, key); + free (key.dptr); + free (data.dptr); + key = nextkey; + } + + /* Write everything. */ + _gdbm_end_update (new_dbf); + gdbm_sync (new_dbf); + +#if HAVE_MMAP + _gdbm_mapped_unmap (dbf); +#endif + + /* Move the new file to old name. */ + + if (rename (new_name, dbf->name) != 0) + { + gdbm_errno = GDBM_REORGANIZE_FAILED; + gdbm_close (new_dbf); + free (new_name); + return -1; + } + + /* Fix up DBF to have the correct information for the new file. */ + if (dbf->file_locking) + { + _gdbm_unlock_file (dbf); + } + close (dbf->desc); + free (dbf->header); + free (dbf->dir); + + if (dbf->bucket_cache != NULL) { + for (index = 0; index < dbf->cache_size; index++) { + if (dbf->bucket_cache[index].ca_bucket != NULL) + free (dbf->bucket_cache[index].ca_bucket); + if (dbf->bucket_cache[index].ca_data.dptr != NULL) + free (dbf->bucket_cache[index].ca_data.dptr); + } + free (dbf->bucket_cache); + } + +#if HAVE_MMAP + /* Re-initialize mapping if required */ + if (dbf->memory_mapping) + _gdbm_mapped_init (dbf); +#endif + + dbf->desc = new_dbf->desc; + dbf->header = new_dbf->header; + dbf->dir = new_dbf->dir; + dbf->bucket = new_dbf->bucket; + dbf->bucket_dir = new_dbf->bucket_dir; + dbf->last_read = new_dbf->last_read; + dbf->bucket_cache = new_dbf->bucket_cache; + dbf->cache_size = new_dbf->cache_size; + dbf->header_changed = new_dbf->header_changed; + dbf->directory_changed = new_dbf->directory_changed; + dbf->bucket_changed = new_dbf->bucket_changed; + dbf->second_changed = new_dbf->second_changed; + + free (new_dbf->name); + free (new_dbf); + free (new_name); + + /* Make sure the new database is all on disk. */ + __fsync (dbf); + + /* Force the right stuff for a correct bucket cache. */ + dbf->cache_entry = &dbf->bucket_cache[0]; + _gdbm_get_bucket (dbf, 0); + + return 0; +} diff --git a/src/gdbmseq.c b/src/gdbmseq.c new file mode 100644 index 0000000..4323185 --- /dev/null +++ b/src/gdbmseq.c @@ -0,0 +1,129 @@ +/* gdbmseq.c - Routines to visit all keys. Not in sorted order. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* Special extern for this file. */ +extern char *_gdbm_read_entry (GDBM_FILE , int); + + +/* Find and read the next entry in the hash structure for DBF starting + at ELEM_LOC of the current bucket and using RETURN_VAL as the place to + put the data that is found. */ + +static void +get_next_key (GDBM_FILE dbf, int elem_loc, datum *return_val) +{ + int found; /* Have we found the next key. */ + char *find_data; /* Data pointer returned by find_key. */ + + /* Find the next key. */ + found = FALSE; + while (!found) + { + /* Advance to the next location in the bucket. */ + elem_loc++; + if (elem_loc == dbf->header->bucket_elems) + { + /* We have finished the current bucket, get the next bucket. */ + elem_loc = 0; + + /* Find the next bucket. It is possible several entries in + the bucket directory point to the same bucket. */ + while (dbf->bucket_dir < dbf->header->dir_size / sizeof (off_t) + && dbf->cache_entry->ca_adr == dbf->dir[dbf->bucket_dir]) + dbf->bucket_dir++; + + /* Check to see if there was a next bucket. */ + if (dbf->bucket_dir < dbf->header->dir_size / sizeof (off_t)) + _gdbm_get_bucket (dbf, dbf->bucket_dir); + else + /* No next key, just return. */ + return ; + } + found = dbf->bucket->h_table[elem_loc].hash_value != -1; + } + + /* Found the next key, read it into return_val. */ + find_data = _gdbm_read_entry (dbf, elem_loc); + return_val->dsize = dbf->bucket->h_table[elem_loc].key_size; + if (return_val->dsize == 0) + return_val->dptr = (char *) malloc (1); + else + return_val->dptr = (char *) malloc (return_val->dsize); + if (return_val->dptr == NULL) _gdbm_fatal (dbf, _("malloc error")); + memcpy (return_val->dptr, find_data, return_val->dsize); +} + + +/* Start the visit of all keys in the database. This produces something in + hash order, not in any sorted order. */ + +datum +gdbm_firstkey (GDBM_FILE dbf) +{ + datum return_val; /* To return the first key. */ + + /* Set the default return value for not finding a first entry. */ + return_val.dptr = NULL; + + /* Initialize the gdbm_errno variable. */ + gdbm_errno = GDBM_NO_ERROR; + + /* Get the first bucket. */ + _gdbm_get_bucket (dbf, 0); + + /* Look for first entry. */ + get_next_key (dbf, -1, &return_val); + + return return_val; +} + + +/* Continue visiting all keys. The next key following KEY is returned. */ + +datum +gdbm_nextkey (GDBM_FILE dbf, datum key) +{ + datum return_val; /* The return value. */ + int elem_loc; /* The location in the bucket. */ + char *find_data; /* Data pointer returned by _gdbm_findkey. */ + int hash_val; /* Returned by _gdbm_findkey. */ + + /* Initialize the gdbm_errno variable. */ + gdbm_errno = GDBM_NO_ERROR; + + /* Set the default return value for no next entry. */ + return_val.dptr = NULL; + + /* Do we have a valid key? */ + if (key.dptr == NULL) return return_val; + + /* Find the key. */ + elem_loc = _gdbm_findkey (dbf, key, &find_data, &hash_val); + if (elem_loc == -1) return return_val; + + /* Find the next key. */ + get_next_key (dbf, elem_loc, &return_val); + + return return_val; +} diff --git a/src/gdbmsetopt.c b/src/gdbmsetopt.c new file mode 100644 index 0000000..c31cdd5 --- /dev/null +++ b/src/gdbmsetopt.c @@ -0,0 +1,258 @@ +/* gdbmsetopt.c - set options pertaining to a GDBM descriptor. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1993, 1994, 2007, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* operate on an already open descriptor. */ + +static int +getbool (void *optval, int optlen) +{ + int n; + + if (!optval || optlen != sizeof (int) || + (((n = *(int*)optval) != TRUE) && n != FALSE)) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + return n; +} + +static int +get_size (void *optval, int optlen, size_t *ret) +{ + if (!optval) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + if (optlen == sizeof (unsigned)) + *ret = *(unsigned*) optval; + else if (optlen == sizeof (unsigned long)) + *ret = *(unsigned long*) optval; + else if (optlen == sizeof (size_t)) + *ret = *(size_t*) optval; + else + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + return 0; +} + +int +gdbm_setopt (GDBM_FILE dbf, int optflag, void *optval, int optlen) +{ + int n; + size_t sz; + + switch (optflag) + { + /* Cache size: */ + + case GDBM_SETCACHESIZE: + /* Optval will point to the new size of the cache. */ + if (dbf->bucket_cache != NULL) + { + gdbm_errno = GDBM_OPT_ALREADY_SET; + return -1; + } + + if (get_size (optval, optlen, &sz)) + return -1; + return _gdbm_init_cache (dbf, (sz > 9) ? sz : 10); + + case GDBM_GETCACHESIZE: + if (!optval || optlen != sizeof (size_t)) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + *(size_t*) optval = dbf->cache_size; + break; + + /* Obsolete form of GDBM_SETSYNCMODE. */ + case GDBM_FASTMODE: + if ((n = getbool (optval, optlen)) == -1) + return -1; + dbf->fast_write = n; + break; + + /* SYNC mode: */ + + case GDBM_SETSYNCMODE: + /* Optval will point to either true or false. */ + if ((n = getbool (optval, optlen)) == -1) + return -1; + dbf->fast_write = !n; + break; + + case GDBM_GETSYNCMODE: + if (!optval || optlen != sizeof (int)) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + *(int*) optval = !dbf->fast_write; + break; + + /* CENTFREE - set or get the stat of the central block repository */ + case GDBM_SETCENTFREE: + /* Optval will point to either true or false. */ + if ((n = getbool (optval, optlen)) == -1) + return -1; + dbf->central_free = n; + break; + + case GDBM_GETCENTFREE: + if (!optval || optlen != sizeof (int)) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + *(int*) optval = !dbf->central_free; + break; + + /* Coalesce state: */ + case GDBM_SETCOALESCEBLKS: + /* Optval will point to either true or false. */ + if ((n = getbool (optval, optlen)) == -1) + return -1; + dbf->coalesce_blocks = n; + break; + + case GDBM_GETCOALESCEBLKS: + if (!optval || optlen != sizeof (int)) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + *(int*) optval = dbf->coalesce_blocks; + break; + + /* Mmap mode */ + case GDBM_SETMMAP: +#if HAVE_MMAP + if ((n = getbool (optval, optlen)) == -1) + return -1; + __fsync (dbf); + if (n == dbf->memory_mapping) + return 0; + if (n) + { + if (_gdbm_mapped_init (dbf) == 0) + dbf->memory_mapping = TRUE; + else + return -1; + } + else + { + _gdbm_mapped_unmap (dbf); + dbf->memory_mapping = FALSE; + } +#else + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; +#endif + break; + + case GDBM_GETMMAP: + if (!optval || optlen != sizeof (int)) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + *(int*) optval = dbf->memory_mapping; + break; + + /* Maximum size of a memory mapped region */ + case GDBM_SETMAXMAPSIZE: +#if HAVE_MMAP + { + size_t page_size = sysconf (_SC_PAGESIZE); + + if (get_size (optval, optlen, &sz)) + return -1; + dbf->mapped_size_max = ((sz + page_size - 1) / page_size) * + page_size; + _gdbm_mapped_init (dbf); + break; + } +#else + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; +#endif + + case GDBM_GETMAXMAPSIZE: + if (!optval || optlen != sizeof (size_t)) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + *(size_t*) optval = dbf->mapped_size_max; + break; + + /* Flags */ + case GDBM_GETFLAGS: + if (!optval || optlen != sizeof (int)) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + else + { + int flags = dbf->read_write; + if (!dbf->fast_write) + flags |= GDBM_SYNC; + if (!dbf->file_locking) + flags |= GDBM_NOLOCK; + if (!dbf->memory_mapping) + flags |= GDBM_NOMMAP; + *(int*) optval = flags; + } + break; + + case GDBM_GETDBNAME: + if (!optval || optlen != sizeof (char*)) + { + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + else + { + char *p = strdup (dbf->name); + if (!p) + { + gdbm_errno = GDBM_MALLOC_ERROR; + return -1; + } + *(char**) optval = p; + } + break; + + default: + gdbm_errno = GDBM_OPT_ILLEGAL; + return -1; + } + + return 0; +} diff --git a/src/gdbmstore.c b/src/gdbmstore.c new file mode 100644 index 0000000..aedf375 --- /dev/null +++ b/src/gdbmstore.c @@ -0,0 +1,156 @@ +/* gdbmstore.c - Add a new key/data pair to the database. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + + +/* Add a new element to the database. CONTENT is keyed by KEY. The + file on disk is updated to reflect the structure of the new database + before returning from this procedure. The FLAGS define the action to + take when the KEY is already in the database. The value GDBM_REPLACE + asks that the old data be replaced by the new CONTENT. The value + GDBM_INSERT asks that an error be returned and no action taken. A + return value of 0 means no errors. A return value of -1 means that + the item was not stored in the data base because the caller was not an + official writer. A return value of 0 means that the item was not stored + because the argument FLAGS was GDBM_INSERT and the KEY was already in + the database. */ + +int +gdbm_store (GDBM_FILE dbf, datum key, datum content, int flags) +{ + int new_hash_val; /* The new hash value. */ + int elem_loc; /* The location in hash bucket. */ + off_t file_adr; /* The address of new space in the file. */ + off_t file_pos; /* The position after a lseek. */ + off_t free_adr; /* For keeping track of a freed section. */ + int free_size; + int new_size; /* Used in allocating space. */ + char *temp; /* Used in _gdbm_findkey call. */ + int rc; + + /* First check to make sure this guy is a writer. */ + if (dbf->read_write == GDBM_READER) + { + gdbm_errno = GDBM_READER_CANT_STORE; + return -1; + } + + /* Check for illegal data values. A NULL dptr field is illegal because + NULL dptr returned by a lookup procedure indicates an error. */ + if ((key.dptr == NULL) || (content.dptr == NULL)) + { + gdbm_errno = GDBM_ILLEGAL_DATA; + return -1; + } + + /* Initialize the gdbm_errno variable. */ + gdbm_errno = GDBM_NO_ERROR; + + /* Look for the key in the file. + A side effect loads the correct bucket and calculates the hash value. */ + elem_loc = _gdbm_findkey (dbf, key, &temp, &new_hash_val); + + /* Initialize these. */ + file_adr = 0; + new_size = key.dsize + content.dsize; + + /* Did we find the item? */ + if (elem_loc != -1) + { + if (flags == GDBM_REPLACE) + { + /* Just replace the data. */ + free_adr = dbf->bucket->h_table[elem_loc].data_pointer; + free_size = dbf->bucket->h_table[elem_loc].key_size + + dbf->bucket->h_table[elem_loc].data_size; + if (free_size != new_size) + { + _gdbm_free (dbf, free_adr, free_size); + } + else + { + /* Just reuse the same address! */ + file_adr = free_adr; + } + } + else + { + gdbm_errno = GDBM_CANNOT_REPLACE; + return 1; + } + } + + + /* Get the file address for the new space. + (Current bucket's free space is first place to look.) */ + if (file_adr == 0) + { + file_adr = _gdbm_alloc (dbf, new_size); + } + + /* If this is a new entry in the bucket, we need to do special things. */ + if (elem_loc == -1) + { + if (dbf->bucket->count == dbf->header->bucket_elems) + { + /* Split the current bucket. */ + _gdbm_split_bucket (dbf, new_hash_val); + } + + /* Find space to insert into bucket and set elem_loc to that place. */ + elem_loc = new_hash_val % dbf->header->bucket_elems; + while (dbf->bucket->h_table[elem_loc].hash_value != -1) + { elem_loc = (elem_loc + 1) % dbf->header->bucket_elems; } + + /* We now have another element in the bucket. Add the new information.*/ + dbf->bucket->count += 1; + dbf->bucket->h_table[elem_loc].hash_value = new_hash_val; + memcpy (dbf->bucket->h_table[elem_loc].key_start, key.dptr, + (SMALL < key.dsize ? SMALL : key.dsize)); + } + + + /* Update current bucket data pointer and sizes. */ + dbf->bucket->h_table[elem_loc].data_pointer = file_adr; + dbf->bucket->h_table[elem_loc].key_size = key.dsize; + dbf->bucket->h_table[elem_loc].data_size = content.dsize; + + /* Write the data to the file. */ + file_pos = __lseek (dbf, file_adr, SEEK_SET); + if (file_pos != file_adr) _gdbm_fatal (dbf, _("lseek error")); + rc = _gdbm_full_write (dbf, key.dptr, key.dsize); + if (rc) + _gdbm_fatal (dbf, gdbm_strerror (rc)); + rc = _gdbm_full_write (dbf, content.dptr, content.dsize); + if (rc) + _gdbm_fatal (dbf, gdbm_strerror (rc)); + + /* Current bucket has changed. */ + dbf->cache_entry->ca_changed = TRUE; + dbf->bucket_changed = TRUE; + + /* Write everything that is needed to the disk. */ + _gdbm_end_update (dbf); + return 0; + +} diff --git a/src/gdbmsync.c b/src/gdbmsync.c new file mode 100644 index 0000000..83b8e85 --- /dev/null +++ b/src/gdbmsync.c @@ -0,0 +1,37 @@ +/* gdbmsync.c - Sync the disk with the in memory state. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +/* Make sure the database is all on disk. */ + +void +gdbm_sync (GDBM_FILE dbf) +{ + + /* Initialize the gdbm_errno variable. */ + gdbm_errno = GDBM_NO_ERROR; + + /* Do the sync on the file. */ + __fsync (dbf); + +} diff --git a/src/gettext.h b/src/gettext.h new file mode 100644 index 0000000..e76b592 --- /dev/null +++ b/src/gettext.h @@ -0,0 +1,280 @@ +/* Convenience header for conditional use of GNU . + Copyright (C) 1995-1998, 2000-2002, 2004-2006, 2009 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published + by the Free Software Foundation; either version 3, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + USA. */ + +#ifndef _LIBGETTEXT_H +#define _LIBGETTEXT_H 1 + +/* NLS can be disabled through the configure --disable-nls option. */ +#if ENABLE_NLS + +/* Get declarations of GNU message catalog functions. */ +# include + +/* You can set the DEFAULT_TEXT_DOMAIN macro to specify the domain used by + the gettext() and ngettext() macros. This is an alternative to calling + textdomain(), and is useful for libraries. */ +# ifdef DEFAULT_TEXT_DOMAIN +# undef gettext +# define gettext(Msgid) \ + dgettext (DEFAULT_TEXT_DOMAIN, Msgid) +# undef ngettext +# define ngettext(Msgid1, Msgid2, N) \ + dngettext (DEFAULT_TEXT_DOMAIN, Msgid1, Msgid2, N) +# endif + +#else + +/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which + chokes if dcgettext is defined as a macro. So include it now, to make + later inclusions of a NOP. We don't include + as well because people using "gettext.h" will not include , + and also including would fail on SunOS 4, whereas + is OK. */ +#if defined(__sun) +# include +#endif + +/* Many header files from the libstdc++ coming with g++ 3.3 or newer include + , which chokes if dcgettext is defined as a macro. So include + it now, to make later inclusions of a NOP. */ +#if defined(__cplusplus) && defined(__GNUG__) && (__GNUC__ >= 3) +# include +# if (__GLIBC__ >= 2) || _GLIBCXX_HAVE_LIBINTL_H +# include +# endif +#endif + +/* Disabled NLS. + The casts to 'const char *' serve the purpose of producing warnings + for invalid uses of the value returned from these functions. + On pre-ANSI systems without 'const', the config.h file is supposed to + contain "#define const". */ +# undef gettext +# define gettext(Msgid) ((const char *) (Msgid)) +# undef dgettext +# define dgettext(Domainname, Msgid) ((void) (Domainname), gettext (Msgid)) +# undef dcgettext +# define dcgettext(Domainname, Msgid, Category) \ + ((void) (Category), dgettext (Domainname, Msgid)) +# undef ngettext +# define ngettext(Msgid1, Msgid2, N) \ + ((N) == 1 \ + ? ((void) (Msgid2), (const char *) (Msgid1)) \ + : ((void) (Msgid1), (const char *) (Msgid2))) +# undef dngettext +# define dngettext(Domainname, Msgid1, Msgid2, N) \ + ((void) (Domainname), ngettext (Msgid1, Msgid2, N)) +# undef dcngettext +# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \ + ((void) (Category), dngettext(Domainname, Msgid1, Msgid2, N)) +# undef textdomain +# define textdomain(Domainname) ((const char *) (Domainname)) +# undef bindtextdomain +# define bindtextdomain(Domainname, Dirname) \ + ((void) (Domainname), (const char *) (Dirname)) +# undef bind_textdomain_codeset +# define bind_textdomain_codeset(Domainname, Codeset) \ + ((void) (Domainname), (const char *) (Codeset)) + +#endif + +/* A pseudo function call that serves as a marker for the automated + extraction of messages, but does not call gettext(). The run-time + translation is done at a different place in the code. + The argument, String, should be a literal string. Concatenated strings + and other string expressions won't work. + The macro's expansion is not parenthesized, so that it is suitable as + initializer for static 'char[]' or 'const char[]' variables. */ +#define gettext_noop(String) String + +/* The separator between msgctxt and msgid in a .mo file. */ +#define GETTEXT_CONTEXT_GLUE "\004" + +/* Pseudo function calls, taking a MSGCTXT and a MSGID instead of just a + MSGID. MSGCTXT and MSGID must be string literals. MSGCTXT should be + short and rarely need to change. + The letter 'p' stands for 'particular' or 'special'. */ +#ifdef DEFAULT_TEXT_DOMAIN +# define pgettext(Msgctxt, Msgid) \ + pgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES) +#else +# define pgettext(Msgctxt, Msgid) \ + pgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES) +#endif +#define dpgettext(Domainname, Msgctxt, Msgid) \ + pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES) +#define dcpgettext(Domainname, Msgctxt, Msgid, Category) \ + pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, Category) +#ifdef DEFAULT_TEXT_DOMAIN +# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \ + npgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES) +#else +# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \ + npgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES) +#endif +#define dnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N) \ + npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES) +#define dcnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N, Category) \ + npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, Category) + +#ifdef __GNUC__ +__inline +#else +#ifdef __cplusplus +inline +#endif +#endif +static const char * +pgettext_aux (const char *domain, + const char *msg_ctxt_id, const char *msgid, + int category) +{ + const char *translation = dcgettext (domain, msg_ctxt_id, category); + if (translation == msg_ctxt_id) + return msgid; + else + return translation; +} + +#ifdef __GNUC__ +__inline +#else +#ifdef __cplusplus +inline +#endif +#endif +static const char * +npgettext_aux (const char *domain, + const char *msg_ctxt_id, const char *msgid, + const char *msgid_plural, unsigned long int n, + int category) +{ + const char *translation = + dcngettext (domain, msg_ctxt_id, msgid_plural, n, category); + if (translation == msg_ctxt_id || translation == msgid_plural) + return (n == 1 ? msgid : msgid_plural); + else + return translation; +} + +/* The same thing extended for non-constant arguments. Here MSGCTXT and MSGID + can be arbitrary expressions. But for string literals these macros are + less efficient than those above. */ + +#include + +#define _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS \ + (((__GNUC__ >= 3 || __GNUG__ >= 2) && !__STRICT_ANSI__) \ + /* || __STDC_VERSION__ >= 199901L */ ) + +#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS +#include +#endif + +#define pgettext_expr(Msgctxt, Msgid) \ + dcpgettext_expr (NULL, Msgctxt, Msgid, LC_MESSAGES) +#define dpgettext_expr(Domainname, Msgctxt, Msgid) \ + dcpgettext_expr (Domainname, Msgctxt, Msgid, LC_MESSAGES) + +#ifdef __GNUC__ +__inline +#else +#ifdef __cplusplus +inline +#endif +#endif +static const char * +dcpgettext_expr (const char *domain, + const char *msgctxt, const char *msgid, + int category) +{ + size_t msgctxt_len = strlen (msgctxt) + 1; + size_t msgid_len = strlen (msgid) + 1; + const char *translation; +#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS + char msg_ctxt_id[msgctxt_len + msgid_len]; +#else + char buf[1024]; + char *msg_ctxt_id = + (msgctxt_len + msgid_len <= sizeof (buf) + ? buf + : (char *) malloc (msgctxt_len + msgid_len)); + if (msg_ctxt_id != NULL) +#endif + { + memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1); + msg_ctxt_id[msgctxt_len - 1] = '\004'; + memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len); + translation = dcgettext (domain, msg_ctxt_id, category); +#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS + if (msg_ctxt_id != buf) + free (msg_ctxt_id); +#endif + if (translation != msg_ctxt_id) + return translation; + } + return msgid; +} + +#define npgettext_expr(Msgctxt, Msgid, MsgidPlural, N) \ + dcnpgettext_expr (NULL, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES) +#define dnpgettext_expr(Domainname, Msgctxt, Msgid, MsgidPlural, N) \ + dcnpgettext_expr (Domainname, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES) + +#ifdef __GNUC__ +__inline +#else +#ifdef __cplusplus +inline +#endif +#endif +static const char * +dcnpgettext_expr (const char *domain, + const char *msgctxt, const char *msgid, + const char *msgid_plural, unsigned long int n, + int category) +{ + size_t msgctxt_len = strlen (msgctxt) + 1; + size_t msgid_len = strlen (msgid) + 1; + const char *translation; +#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS + char msg_ctxt_id[msgctxt_len + msgid_len]; +#else + char buf[1024]; + char *msg_ctxt_id = + (msgctxt_len + msgid_len <= sizeof (buf) + ? buf + : (char *) malloc (msgctxt_len + msgid_len)); + if (msg_ctxt_id != NULL) +#endif + { + memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1); + msg_ctxt_id[msgctxt_len - 1] = '\004'; + memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len); + translation = dcngettext (domain, msg_ctxt_id, msgid_plural, n, category); +#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS + if (msg_ctxt_id != buf) + free (msg_ctxt_id); +#endif + if (!(translation == msg_ctxt_id || translation == msgid_plural)) + return translation; + } + return (n == 1 ? msgid : msgid_plural); +} + +#endif /* _LIBGETTEXT_H */ diff --git a/src/hash.c b/src/hash.c new file mode 100644 index 0000000..8e64654 --- /dev/null +++ b/src/hash.c @@ -0,0 +1,47 @@ +/* hash.c - The gdbm hash function. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + + +/* This hash function computes a 31 bit value. The value is used to index + the hash directory using the top n bits. It is also used in a hash bucket + to find the home position of the element by taking the value modulo the + bucket hash table size. */ + +int +_gdbm_hash (datum key) +{ + unsigned int value; /* Used to compute the hash value. */ + int index; /* Used to cycle through random values. */ + + + /* Set the initial value from key. */ + value = 0x238F13AF * key.dsize; + for (index = 0; index < key.dsize; index++) + value = (value + (key.dptr[index] << (index*5 % 24))) & 0x7FFFFFFF; + + value = (1103515243 * value + 12345) & 0x7FFFFFFF; + + /* Return the value. */ + return((int) value); +} diff --git a/src/lock.c b/src/lock.c new file mode 100644 index 0000000..214e1cb --- /dev/null +++ b/src/lock.c @@ -0,0 +1,154 @@ +/* lock.c - Implement basic file locking for GDBM. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 2008, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +#include + +#if HAVE_FLOCK +# ifndef LOCK_SH +# define LOCK_SH 1 +# endif + +# ifndef LOCK_EX +# define LOCK_EX 2 +# endif + +# ifndef LOCK_NB +# define LOCK_NB 4 +# endif + +# ifndef LOCK_UN +# define LOCK_UN 8 +# endif +#endif + +#if defined(F_SETLK) && defined(F_RDLCK) && defined(F_WRLCK) +# define HAVE_FCNTL_LOCK 1 +#else +# define HAVE_FCNTL_LOCK 0 +#endif + +#if 0 +int +gdbm_locked (GDBM_FILE dbf) +{ + return (dbf->lock_type != LOCKING_NONE); +} +#endif + +void +_gdbm_unlock_file (GDBM_FILE dbf) +{ +#if HAVE_FCNTL_LOCK + struct flock fl; +#endif + + switch (dbf->lock_type) + { + case LOCKING_FLOCK: +#if HAVE_FLOCK + flock (dbf->desc, LOCK_UN); +#endif + break; + + case LOCKING_LOCKF: +#if HAVE_LOCKF + lockf (dbf->desc, F_ULOCK, (off_t)0L); +#endif + break; + + case LOCKING_FCNTL: +#if HAVE_FCNTL_LOCK + fl.l_type = F_UNLCK; + fl.l_whence = SEEK_SET; + fl.l_start = fl.l_len = (off_t)0L; + fcntl (dbf->desc, F_SETLK, &fl); +#endif + break; + + case LOCKING_NONE: + break; + } + + dbf->lock_type = LOCKING_NONE; +} + +/* Try each supported locking mechanism. */ +int +_gdbm_lock_file (GDBM_FILE dbf) +{ +#if HAVE_FCNTL_LOCK + struct flock fl; +#endif + int lock_val = -1; + +#if HAVE_FLOCK + if (dbf->read_write == GDBM_READER) + lock_val = flock (dbf->desc, LOCK_SH + LOCK_NB); + else + lock_val = flock (dbf->desc, LOCK_EX + LOCK_NB); + + if ((lock_val == -1) && (errno == EWOULDBLOCK)) + { + dbf->lock_type = LOCKING_NONE; + return lock_val; + } + else if (lock_val != -1) + { + dbf->lock_type = LOCKING_FLOCK; + return lock_val; + } +#endif + +#if HAVE_LOCKF + /* Mask doesn't matter for lockf. */ + lock_val = lockf (dbf->desc, F_LOCK, (off_t)0L); + if ((lock_val == -1) && (errno == EDEADLK)) + { + dbf->lock_type = LOCKING_NONE; + return lock_val; + } + else if (lock_val != -1) + { + dbf->lock_type = LOCKING_LOCKF; + return lock_val; + } +#endif + +#if HAVE_FCNTL_LOCK + /* If we're still here, try fcntl. */ + if (dbf->read_write == GDBM_READER) + fl.l_type = F_RDLCK; + else + fl.l_type = F_WRLCK; + fl.l_whence = SEEK_SET; + fl.l_start = fl.l_len = (off_t)0L; + lock_val = fcntl (dbf->desc, F_SETLK, &fl); + + if (lock_val != -1) + dbf->lock_type = LOCKING_FCNTL; +#endif + + if (lock_val == -1) + dbf->lock_type = LOCKING_NONE; + return lock_val; +} diff --git a/src/mmap.c b/src/mmap.c new file mode 100644 index 0000000..8735624 --- /dev/null +++ b/src/mmap.c @@ -0,0 +1,366 @@ +/* This file is part of GDBM. + Copyright (C) 2007, 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +#include "autoconf.h" + +#if HAVE_MMAP + +# include "gdbmdefs.h" + +# include +# include +# include +# include +# include +# include + +/* Some systems fail to define this */ +# ifndef MAP_FAILED +# define MAP_FAILED ((void*)-1) +# endif + +/* Translate current offset in the mapped region into the absolute position */ +# define _GDBM_MMAPPED_POS(dbf) ((dbf)->mapped_off + (dbf)->mapped_pos) +/* Return true if the absolute offset OFF lies within the currentlty mmapped + region */ +# define _GDBM_IN_MAPPED_REGION_P(dbf, off) \ + ((off) >= (dbf)->mapped_off \ + && ((off) - (dbf)->mapped_off) < (dbf)->mapped_size) +/* Return true if the current region needs to be remapped */ +# define _GDBM_NEED_REMAP(dbf) \ + (!(dbf)->mapped_region || (dbf)->mapped_pos == (dbf)->mapped_size) +/* Return the sum of the currently mapped size and DELTA */ +# define SUM_FILE_SIZE(dbf, delta) \ + ((dbf)->mapped_off + (dbf)->mapped_size + (delta)) + +/* Store the size of the GDBM file DBF in *PSIZE. + Return 0 on success and -1 on failure. */ +int +_gdbm_file_size (GDBM_FILE dbf, off_t *psize) +{ + struct stat sb; + if (fstat (dbf->desc, &sb)) + return -1; + *psize = sb.st_size; + return 0; +} + +/* Unmap the region. Reset all mapped fields to initial values. */ +void +_gdbm_mapped_unmap (GDBM_FILE dbf) +{ + if (dbf->mapped_region) + { + munmap (dbf->mapped_region, dbf->mapped_size); + dbf->mapped_region = NULL; + dbf->mapped_size = 0; + dbf->mapped_pos = 0; + dbf->mapped_off = 0; + } +} + +/* Remap the DBF file according to dbf->{mapped_off,mapped_pos,mapped_size}. + Take care to recompute {mapped_off,mapped_pos} so that the former lies + on a page size boundary. */ +int +_gdbm_internal_remap (GDBM_FILE dbf, size_t size) +{ + void *p; + int flags = PROT_READ; + size_t page_size = sysconf (_SC_PAGESIZE); + + munmap (dbf->mapped_region, dbf->mapped_size); + dbf->mapped_size = size; + + if (size == 0) + return 0; + + dbf->mapped_pos += dbf->mapped_off % page_size; + dbf->mapped_off = (dbf->mapped_off / page_size) * page_size; + + if (dbf->read_write) + flags |= PROT_WRITE; + + p = mmap (NULL, dbf->mapped_size, flags, MAP_SHARED, + dbf->desc, dbf->mapped_off); + if (p == MAP_FAILED) + { + dbf->mapped_region = NULL; + gdbm_errno = GDBM_MALLOC_ERROR; + return -1; + } + + dbf->mapped_region = p; + return 0; +} + +# define _REMAP_DEFAULT 0 +# define _REMAP_EXTEND 1 +# define _REMAP_END 2 + +/* Remap the GDBM file so that its mapped region ends on SIZEth byte. + If the file is opened with write permissions, FLAG controls how + it is expanded. The value _REMAP_DEFAULT truncates SIZE to the + actual file size. The value _REMAP_EXTEND extends the file, if + necessary, to accomodate max(SIZE,dbf->header->next_block) bytes. + Finally, the value _REMAP_END instructs the function to use + max(SIZE, file_size) as the upper bound of the mapped region. + + If the file is opened read-only, FLAG is ignored and SIZE is + truncated to the actual file size. + + The upper bound obtained that way is used as a *hint* to select + the actual size of the mapped region. which can never exceed + dbf->mapped_size_max. + + The function returns 0 on success, -1 on failure. */ +int +_gdbm_mapped_remap (GDBM_FILE dbf, off_t size, int flag) +{ + off_t file_size, pos; + + if (_gdbm_file_size (dbf, &file_size)) + { + SAVE_ERRNO (_gdbm_mapped_unmap (dbf)); + gdbm_errno = GDBM_FILE_STAT_ERROR; + return -1; + } + + if (flag == _REMAP_END && size < file_size) + size = file_size; + + if (dbf->read_write) + { + if (size > file_size) + { + if (flag != _REMAP_DEFAULT) + { + char c = 0; + + if (size < dbf->header->next_block) + size = dbf->header->next_block; + lseek (dbf->desc, size - 1, SEEK_SET); + write (dbf->desc, &c, 1); + file_size = size; + } + else + { + size = file_size; + return 0; + } + } + } + else + { + if (size > file_size) + size = file_size; + + if (size == SUM_FILE_SIZE (dbf, 0)) + return 0; + } + + pos = _GDBM_MMAPPED_POS (dbf); + if (size > dbf->mapped_size_max) + { + dbf->mapped_off = pos; + dbf->mapped_pos = 0; + size = dbf->mapped_size_max; + if (dbf->mapped_off + size > file_size) + size = file_size - dbf->mapped_off; + } + else + { + dbf->mapped_pos += dbf->mapped_off; + dbf->mapped_off = 0; + } + + return _gdbm_internal_remap (dbf, size); +} + +/* Initialize mapping system. If the file size is less than MAPPED_SIZE_MAX, + map the entire file into the memory. Otherwise, map first MAPPED_SIZE_MAX + bytes. */ +int +_gdbm_mapped_init (GDBM_FILE dbf) +{ + if (dbf->mapped_size_max == 0) + dbf->mapped_size_max = SIZE_T_MAX; + return _gdbm_mapped_remap (dbf, 0, _REMAP_END); +} + +/* Read LEN bytes from the GDBM file DBF into BUFFER. If mmapping is + not initialized or if it fails, fall back to the classical read(1). + Return number of bytes read or -1 on failure. */ +ssize_t +_gdbm_mapped_read (GDBM_FILE dbf, void *buffer, size_t len) +{ + if (dbf->memory_mapping) + { + ssize_t total = 0; + char *cbuf = buffer; + + while (len) + { + size_t nbytes; + + if (_GDBM_NEED_REMAP (dbf)) + { + off_t pos = _GDBM_MMAPPED_POS (dbf); + if (_gdbm_mapped_remap (dbf, SUM_FILE_SIZE (dbf, len), + _REMAP_DEFAULT)) + { + int rc; + + dbf->memory_mapping = FALSE; + if (lseek (dbf->desc, pos, SEEK_SET) != pos) + return total > 0 ? total : -1; + rc = read (dbf->desc, cbuf, len); + if (rc == -1) + return total > 0 ? total : -1; + return total + rc; + } + } + + nbytes = dbf->mapped_size - dbf->mapped_pos; + if (nbytes == 0) + break; + if (nbytes > len) + nbytes = len; + + memcpy (cbuf, (char*) dbf->mapped_region + dbf->mapped_pos, nbytes); + cbuf += nbytes; + dbf->mapped_pos += nbytes; + total += nbytes; + len -= nbytes; + } + return total; + } + return read (dbf->desc, buffer, len); +} + +/* Write LEN bytes from BUFFER to the GDBM file DBF. If mmapping is + not initialized or if it fails, fall back to the classical write(1). + Return number of bytes written or -1 on failure. */ +ssize_t +_gdbm_mapped_write (GDBM_FILE dbf, void *buffer, size_t len) +{ + if (dbf->memory_mapping) + { + ssize_t total = 0; + char *cbuf = buffer; + + while (len) + { + size_t nbytes; + + if (_GDBM_NEED_REMAP (dbf)) + { + off_t pos = _GDBM_MMAPPED_POS (dbf); + if (_gdbm_mapped_remap (dbf, SUM_FILE_SIZE (dbf, len), + _REMAP_EXTEND)) + { + int rc; + + dbf->memory_mapping = FALSE; + if (lseek (dbf->desc, pos, SEEK_SET) != pos) + return total > 0 ? total : -1; + rc = write (dbf->desc, cbuf, len); + if (rc == -1) + return total > 0 ? total : -1; + return total + rc; + } + } + + nbytes = dbf->mapped_size - dbf->mapped_pos; + if (nbytes == 0) + break; + if (nbytes > len) + nbytes = len; + + memcpy ((char*) dbf->mapped_region + dbf->mapped_pos, cbuf, nbytes); + cbuf += nbytes; + dbf->mapped_pos += nbytes; + total += nbytes; + len -= nbytes; + } + return total; + } + return write (dbf->desc, buffer, len); +} + +/* Seek to the offset OFFSET in the GDBM file DBF, according to the + lseek(1)-style directive WHENCE. Return the resulting absolute + offset or -1 in case of failure. If mmapping is not initialized or + if it fails, fall back to the classical lseek(1). + + Return number of bytes written or -1 on failure. */ + +off_t +_gdbm_mapped_lseek (GDBM_FILE dbf, off_t offset, int whence) +{ + if (dbf->memory_mapping) + { + off_t needle; + + switch (whence) + { + case SEEK_SET: + needle = offset; + break; + + case SEEK_CUR: + needle = offset + _GDBM_MMAPPED_POS (dbf); + break; + + case SEEK_END: + { + off_t file_size; + if (_gdbm_file_size (dbf, &file_size)) + { + gdbm_errno = GDBM_FILE_STAT_ERROR; + return -1; + } + needle = file_size - offset; + break; + } + } + + if (!_GDBM_IN_MAPPED_REGION_P (dbf, needle)) + { + _gdbm_mapped_unmap (dbf); + dbf->mapped_off = needle; + dbf->mapped_pos = 0; + } + else + dbf->mapped_pos = needle - dbf->mapped_off; + return needle; + } + return lseek (dbf->desc, offset, whence); +} + +/* Sync the mapped region to disk. */ +int +_gdbm_mapped_sync (GDBM_FILE dbf) +{ + if (dbf->mapped_region) + { + return msync (dbf->mapped_region, dbf->mapped_size, + MS_SYNC | MS_INVALIDATE); + } + return fsync (dbf->desc); +} + +#endif diff --git a/src/proto.h b/src/proto.h new file mode 100644 index 0000000..39a5e31 --- /dev/null +++ b/src/proto.h @@ -0,0 +1,62 @@ +/* proto.h - The prototypes for the dbm routines. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + + +/* From bucket.c */ +void _gdbm_new_bucket (GDBM_FILE, hash_bucket *, int); +void _gdbm_get_bucket (GDBM_FILE, int); +void _gdbm_split_bucket (GDBM_FILE, int); +void _gdbm_write_bucket (GDBM_FILE, cache_elem *); + +/* From falloc.c */ +off_t _gdbm_alloc (GDBM_FILE, int); +void _gdbm_free (GDBM_FILE, off_t, int); +int _gdbm_put_av_elem (avail_elem, avail_elem [], int *, int); + +/* From findkey.c */ +char *_gdbm_read_entry (GDBM_FILE, int); +int _gdbm_findkey (GDBM_FILE, datum, char **, int *); + +/* From hash.c */ +int _gdbm_hash (datum); + +/* From update.c */ +void _gdbm_end_update (GDBM_FILE); +void _gdbm_fatal (GDBM_FILE, const char *); + +/* From gdbmopen.c */ +int _gdbm_init_cache (GDBM_FILE, size_t); + +/* From mmap.c */ +int _gdbm_mapped_init (GDBM_FILE); +void _gdbm_mapped_unmap (GDBM_FILE); +ssize_t _gdbm_mapped_read (GDBM_FILE, void *, size_t); +ssize_t _gdbm_mapped_write (GDBM_FILE, void *, size_t); +off_t _gdbm_mapped_lseek (GDBM_FILE, off_t, int); +int _gdbm_mapped_sync (GDBM_FILE); + +/* From lock.c */ +void _gdbm_unlock_file (GDBM_FILE); +int _gdbm_lock_file (GDBM_FILE); + +/* From fullio.c */ +int _gdbm_full_read (GDBM_FILE, void *, size_t); +int _gdbm_full_write (GDBM_FILE, void *, size_t); + + diff --git a/src/systems.h b/src/systems.h new file mode 100644 index 0000000..c83cd9c --- /dev/null +++ b/src/systems.h @@ -0,0 +1,89 @@ +/* systems.h - Most of the system dependant code and defines are here. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include all system headers first. */ +#if HAVE_SYS_TYPES_H +# include +#endif +#include +#if HAVE_SYS_FILE_H +# include +#endif +#include +#if HAVE_STDLIB_H +# include +#endif +#if HAVE_STRING_H +# include +#else +# include +#endif +#if HAVE_UNISTD_H +# include +#endif +#if HAVE_FCNTL_H +# include +#endif +#include + +#ifndef SEEK_SET +# define SEEK_SET 0 +#endif + +#ifndef O_CLOEXEC +# define O_CLOEXEC 0 +#endif + +/* Default block size. Some systems do not have blocksize in their + stat record. This code uses the BSD blocksize from stat. */ + +#if HAVE_STRUCT_STAT_ST_BLKSIZE +# define STATBLKSIZE file_stat.st_blksize +#else +# define STATBLKSIZE 1024 +#endif + +/* Do we have ftruncate? */ +#if HAVE_FTRUNCATE +# define TRUNCATE(dbf) ftruncate (dbf->desc, 0) +#else +# define TRUNCATE(dbf) close( open (dbf->name, O_RDWR|O_TRUNC, mode)); +#endif + +#ifndef STDERR_FILENO +# define STDERR_FILENO 2 +#endif + +/* I/O macros. */ +#if HAVE_MMAP +# define __read(_dbf, _buf, _size) _gdbm_mapped_read(_dbf, _buf, _size) +# define __write(_dbf, _buf, _size) _gdbm_mapped_write(_dbf, _buf, _size) +# define __lseek(_dbf, _off, _whn) _gdbm_mapped_lseek(_dbf, _off, _whn) +# define __fsync(_dbf) _gdbm_mapped_sync(_dbf) +#else +# define __read(_dbf, _buf, _size) read(_dbf->desc, _buf, _size) +# define __write(_dbf, _buf, _size) write(_dbf->desc, _buf, _size) +# define __lseek(_dbf, _off, _whn) lseek(_dbf->desc, _off, _whn) +# if HAVE_FSYNC +# define __fsync(_dbf) fsync(_dbf->desc) +# else +# define __fsync(_dbf) { sync(); sync(); } +# endif +#endif + diff --git a/src/testgdbm.c b/src/testgdbm.c new file mode 100644 index 0000000..b2b9c6c --- /dev/null +++ b/src/testgdbm.c @@ -0,0 +1,1227 @@ +/* testgdbm.c - Driver program to test the database routines and to + help debug gdbm. Uses inside information to show "system" information */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" +#include "gdbm.h" + +#include +#include +#include +#include +#ifdef HAVE_SYS_TERMIOS_H +# include +#endif +#include +#ifdef HAVE_LOCALE_H +# include +#endif + +const char *progname; /* Program name */ + +char *prompt = "testgdbm> "; + +char *file_name = NULL; /* Database file name */ +GDBM_FILE gdbm_file = NULL; /* Database to operate upon */ +int interactive; /* Are we running in interactive mode? */ +datum key_data; /* Current key */ +datum return_data; /* Current data */ +int key_z = 1; /* Keys are nul-terminated strings */ +int data_z = 1; /* Data are nul-terminated strings */ + +#define SIZE_T_MAX ((size_t)-1) + + +void +error (int code, const char *fmt, ...) +{ + va_list ap; + if (!interactive) + fprintf (stderr, "%s: ", progname); + va_start (ap, fmt); + vfprintf (stderr, fmt, ap); + va_end (ap); + fputc ('\n', stderr); + if (code) + exit (code); +} + + +size_t +bucket_print_lines (hash_bucket *bucket) +{ + return 6 + gdbm_file->header->bucket_elems + 3 + bucket->av_count; +} + +/* Debug procedure to print the contents of the current hash bucket. */ +void +print_bucket (FILE *fp, hash_bucket *bucket, const char *mesg) +{ + int index; + + fprintf (fp, + _("******* %s **********\n\nbits = %d\ncount= %d\nHash Table:\n"), + mesg, bucket->bucket_bits, bucket->count); + fprintf (fp, + _(" # hash value key size data size data adr home\n")); + for (index = 0; index < gdbm_file->header->bucket_elems; index++) + fprintf (fp, " %4d %12x %11d %11d %11lu %5d\n", index, + bucket->h_table[index].hash_value, + bucket->h_table[index].key_size, + bucket->h_table[index].data_size, + (unsigned long) bucket->h_table[index].data_pointer, + bucket->h_table[index].hash_value % + gdbm_file->header->bucket_elems); + + fprintf (fp, _("\nAvail count = %1d\n"), bucket->av_count); + fprintf (fp, _("Avail adr size\n")); + for (index = 0; index < bucket->av_count; index++) + fprintf (fp, "%9lu%9d\n", + (unsigned long) bucket->bucket_avail[index].av_adr, + bucket->bucket_avail[index].av_size); +} + +size_t +_gdbm_avail_list_size (GDBM_FILE dbf, size_t min_size) +{ + int temp; + int size; + avail_block *av_stk; + size_t lines; + int rc; + + lines = 4 + dbf->header->avail.count; + if (lines > min_size) + return lines; + /* Initialize the variables for a pass throught the avail stack. */ + temp = dbf->header->avail.next_block; + size = (((dbf->header->avail.size * sizeof (avail_elem)) >> 1) + + sizeof (avail_block)); + av_stk = (avail_block *) malloc (size); + if (av_stk == NULL) + error (2, _("Out of memory")); + + /* Traverse the stack. */ + while (temp) + { + if (__lseek (dbf, temp, SEEK_SET) != temp) + { + error (0, "lseek: %s", strerror (errno)); + break; + } + + if ((rc = _gdbm_full_read (dbf, av_stk, size))) + { + if (rc == GDBM_FILE_EOF) + error (0, "read: %s", gdbm_strerror (rc)); + else + error (0, "read: %s (%s)", gdbm_strerror (rc), strerror (errno)); + break; + } + + lines += av_stk->count; + if (lines > min_size) + break; + temp = av_stk->next_block; + } + free (av_stk); + + return lines; +} + +void +_gdbm_print_avail_list (FILE *fp, GDBM_FILE dbf) +{ + int temp; + int size; + avail_block *av_stk; + int rc; + + /* Print the the header avail block. */ + fprintf (fp, _("\nheader block\nsize = %d\ncount = %d\n"), + dbf->header->avail.size, dbf->header->avail.count); + for (temp = 0; temp < dbf->header->avail.count; temp++) + { + fprintf (fp, " %15d %10lu \n", + dbf->header->avail.av_table[temp].av_size, + (unsigned long) dbf->header->avail.av_table[temp].av_adr); + } + + /* Initialize the variables for a pass throught the avail stack. */ + temp = dbf->header->avail.next_block; + size = (((dbf->header->avail.size * sizeof (avail_elem)) >> 1) + + sizeof (avail_block)); + av_stk = (avail_block *) malloc (size); + if (av_stk == NULL) + error (2, _("Out of memory")); + + /* Print the stack. */ + while (temp) + { + if (__lseek (dbf, temp, SEEK_SET) != temp) + { + error (0, "lseek: %s", strerror (errno)); + break; + } + + if ((rc = _gdbm_full_read (dbf, av_stk, size))) + { + if (rc == GDBM_FILE_EOF) + error (0, "read: %s", gdbm_strerror (rc)); + else + error (0, "read: %s (%s)", gdbm_strerror (rc), strerror (errno)); + break; + } + + /* Print the block! */ + fprintf (fp, _("\nblock = %d\nsize = %d\ncount = %d\n"), temp, + av_stk->size, av_stk->count); + for (temp = 0; temp < av_stk->count; temp++) + { + fprintf (fp, " %15d %10lu \n", av_stk->av_table[temp].av_size, + (unsigned long) av_stk->av_table[temp].av_adr); + } + temp = av_stk->next_block; + } + free (av_stk); +} + +void +_gdbm_print_bucket_cache (FILE *fp, GDBM_FILE dbf) +{ + int index; + char changed; + + if (dbf->bucket_cache != NULL) + { + fprintf (fp, + _("Bucket Cache (size %d):\n Index: Address Changed Data_Hash \n"), + dbf->cache_size); + for (index = 0; index < dbf->cache_size; index++) + { + changed = dbf->bucket_cache[index].ca_changed; + fprintf (fp, " %5d: %7lu %7s %x\n", + index, + (unsigned long) dbf->bucket_cache[index].ca_adr, + (changed ? _("True") : _("False")), + dbf->bucket_cache[index].ca_data.hash_val); + } + } + else + fprintf (fp, _("Bucket cache has not been initialized.\n")); +} + +void +usage () +{ + printf (_("Usage: %s OPTIONS\n"), progname); + printf (_("Test and modify a GDBM database.\n")); + printf ("\n"); + printf (_("OPTIONS are:\n\n")); + printf (_(" -b SIZE set block size\n")); + printf (_(" -c SIZE set cache size\n")); + printf (_(" -g FILE operate on FILE instead of `junk.gdbm'\n")); + printf (_(" -h print this help summary\n")); + printf (_(" -l disable file locking\n")); + printf (_(" -m disable file mmap\n")); + printf (_(" -n create database\n")); + printf (_(" -r open database in read-only mode\n")); + printf (_(" -s synchronize to the disk after each write\n")); + printf (_(" -v print program version\n")); + printf ("\n"); + printf (_("Report bugs to <%s>.\n"), PACKAGE_BUGREPORT); +} + +void +version () +{ + printf ("testgdbm (%s) %s\n", PACKAGE_NAME, PACKAGE_VERSION); + printf ("Copyright (C) 2007-2011 Free Software Foundation, Inc.\n"); + printf ("License GPLv3+: GNU GPL version 3 or later \n"); + printf ("This is free software: you are free to change and redistribute it.\n"); + printf ("There is NO WARRANTY, to the extent permitted by law.\n"); +} + +int +trimnl (char *str) +{ + int len = strlen (str); + + if (str[len - 1] == '\n') + { + str[--len] = 0; + return 1; + } + return 0; +} + +void +read_from_file (const char *name, int replace) +{ + int line = 0; + char buf[1024]; + datum key; + datum data; + FILE *fp; + int flag = replace ? GDBM_REPLACE : 0; + + fp = fopen (name, "r"); + if (!fp) + { + error (0, _("cannot open file `%s' for reading: %s"), + name, strerror (errno)); + return; + } + + while (fgets (buf, sizeof buf, fp)) + { + char *p; + + if (!trimnl (buf)) + { + error (0, _("%s:%d: line too long"), name, line); + continue; + } + + line++; + p = strchr (buf, ' '); + if (!p) + { + error (0, _("%s:%d: malformed line"), name, line); + continue; + } + + for (*p++ = 0; *p && isspace (*p); p++) + ; + key.dptr = buf; + key.dsize = strlen (buf) + key_z; + data.dptr = p; + data.dsize = strlen (p) + data_z; + if (gdbm_store (gdbm_file, key, data, flag) != 0) + error (0, _("%d: item not inserted: %s"), + line, gdbm_strerror (gdbm_errno)); + } + fclose (fp); +} + +int +get_screen_lines () +{ +#ifdef TIOCGWINSZ + if (isatty (1)) + { + struct winsize ws; + + ws.ws_col = ws.ws_row = 0; + if ((ioctl(1, TIOCGWINSZ, (char *) &ws) < 0) || ws.ws_row == 0) + { + const char *lines = getenv ("LINES"); + if (lines) + ws.ws_row = strtol (lines, NULL, 10); + } + return ws.ws_row; + } +#else + const char *lines = getenv ("LINES"); + if (lines) + return strtol (lines, NULL, 10); +#endif + return -1; +} + +int +get_record_count () +{ + datum key, data; + int count = 0; + data = gdbm_firstkey (gdbm_file); + while (data.dptr != NULL) + { + count++; + key = data; + data = gdbm_nextkey (gdbm_file, key); + free (key.dptr); + } + return count; +} + + +#define ARG_UNUSED __attribute__ ((__unused__)) + +#define NARGS 2 + + +/* c - count */ +void +count_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, + void *call_data ARG_UNUSED) +{ + int count = get_record_count (); + fprintf (fp, ngettext ("There is %d item in the database.\n", + "There are %d items in the database.\n", count), + count); +} + +/* d key - delete */ +void +delete_handler (char *arg[NARGS], FILE *fp, void *call_data ARG_UNUSED) +{ + if (key_data.dptr != NULL) + free (key_data.dptr); + key_data.dptr = strdup (arg[0]); + key_data.dsize = strlen (arg[0]) + key_z; + if (gdbm_delete (gdbm_file, key_data) != 0) + { + if (gdbm_errno == GDBM_ITEM_NOT_FOUND) + error (0, _("Item not found")); + else + error (0, _("Can't delete: %s"), gdbm_strerror (gdbm_errno)); + } +} + +/* f key - fetch */ +void +fetch_handler (char *arg[NARGS], FILE *fp, void *call_data ARG_UNUSED) +{ + if (key_data.dptr != NULL) + free (key_data.dptr); + key_data.dptr = strdup (arg[0]); + key_data.dsize = strlen (arg[0]) + key_z; + return_data = gdbm_fetch (gdbm_file, key_data); + if (return_data.dptr != NULL) + { + fprintf (fp, "%.*s\n", return_data.dsize, return_data.dptr); + free (return_data.dptr); + } + else + fprintf (stderr, _("No such item found.\n")); +} + +/* s key data - store */ +void +store_handler (char *arg[NARGS], FILE *fp, void *call_data ARG_UNUSED) +{ + datum key; + datum data; + + key.dptr = arg[0]; + key.dsize = strlen (arg[0]) + key_z; + data.dptr = arg[1]; + data.dsize = strlen (arg[1]) + data_z; + if (gdbm_store (gdbm_file, key, data, GDBM_REPLACE) != 0) + fprintf (stderr, _("Item not inserted.\n")); +} + +/* 1 - begin iteration */ + +void +firstkey_handler (char *arg[NARGS], FILE *fp, void *call_data ARG_UNUSED) +{ + if (key_data.dptr != NULL) + free (key_data.dptr); + key_data = gdbm_firstkey (gdbm_file); + if (key_data.dptr != NULL) + { + fprintf (fp, "%.*s\n", key_data.dsize, key_data.dptr); + return_data = gdbm_fetch (gdbm_file, key_data); + fprintf (fp, "%.*s\n", return_data.dsize, return_data.dptr); + free (return_data.dptr); + } + else + fprintf (fp, _("No such item found.\n")); +} + +/* n [key] - next key */ +void +nextkey_handler (char *arg[NARGS], FILE *fp, void *call_data ARG_UNUSED) +{ + if (arg[0]) + { + if (key_data.dptr != NULL) + free (key_data.dptr); + key_data.dptr = strdup (arg[0]); + key_data.dsize = strlen (arg[0]) + key_z; + } + return_data = gdbm_nextkey (gdbm_file, key_data); + if (return_data.dptr != NULL) + { + key_data = return_data; + fprintf (fp, "%.*s\n", key_data.dsize, key_data.dptr); + return_data = gdbm_fetch (gdbm_file, key_data); + fprintf (fp, "%.*s\n", return_data.dsize, return_data.dptr); + free (return_data.dptr); + } + else + { + fprintf (stderr, _("No such item found.\n")); + free (key_data.dptr); + key_data.dptr = NULL; + } +} + +/* r - reorganize */ +void +reorganize_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp ARG_UNUSED, + void *call_data ARG_UNUSED) +{ + if (gdbm_reorganize (gdbm_file)) + fprintf (stderr, _("Reorganization failed.\n")); + else + fprintf (stderr, _("Reorganization succeeded.\n")); +} + +/* A - print available list */ +int +avail_begin (char *arg[NARGS], size_t *exp_count, void **data) +{ + if (exp_count) + *exp_count = _gdbm_avail_list_size (gdbm_file, SIZE_T_MAX); + return 0; +} + +void +avail_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, + void *call_data ARG_UNUSED) +{ + _gdbm_print_avail_list (fp, gdbm_file); +} + +/* C - print current bucket */ +int +print_current_bucket_begin (char *arg[NARGS], size_t *exp_count, void **data) +{ + if (exp_count) + *exp_count = bucket_print_lines (gdbm_file->bucket) + 3; + return 0; +} + +void +print_current_bucket_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, + void *call_data ARG_UNUSED) +{ + print_bucket (fp, gdbm_file->bucket, _("Current bucket")); + fprintf (fp, _("\n current directory entry = %d.\n"), + gdbm_file->bucket_dir); + fprintf (fp, _(" current bucket address = %lu.\n"), + (unsigned long) gdbm_file->cache_entry->ca_adr); +} + +int +getnum (int *pnum, char *arg, char **endp) +{ + char *p; + unsigned long x = strtoul (arg, &p, 10); + if (*p && !isspace (*p)) + { + printf (_("not a number (stopped near %s)\n"), p); + return 1; + } + while (*p && isspace (*p)) + p++; + if (endp) + *endp = p; + else if (*p) + { + printf (_("not a number (stopped near %s)\n"), p); + return 1; + } + *pnum = x; + return 0; +} + +/* B num - print a bucket and set is a current one. + Uses print_current_bucket_handler */ +int +print_bucket_begin (char *arg[NARGS], size_t *exp_count, void **data ARG_UNUSED) +{ + int temp; + + if (getnum (&temp, arg[0], NULL)) + return 1; + + if (temp >= gdbm_file->header->dir_size / 4) + { + fprintf (stderr, _("Not a bucket.\n")); + return 1; + } + _gdbm_get_bucket (gdbm_file, temp); + if (exp_count) + *exp_count = bucket_print_lines (gdbm_file->bucket) + 3; + return 0; +} + + +/* D - print hash directory */ +int +print_dir_begin (char *arg[NARGS], size_t *exp_count, void **data ARG_UNUSED) +{ + if (exp_count) + *exp_count = gdbm_file->header->dir_size / 4 + 3; + return 0; +} + +void +print_dir_handler (char *arg[NARGS] ARG_UNUSED, FILE *out, + void *call_data ARG_UNUSED) +{ + int i; + + fprintf (out, _("Hash table directory.\n")); + fprintf (out, _(" Size = %d. Bits = %d. \n\n"), + gdbm_file->header->dir_size, gdbm_file->header->dir_bits); + + for (i = 0; i < gdbm_file->header->dir_size / 4; i++) + fprintf (out, " %10d: %12lu\n", i, (unsigned long) gdbm_file->dir[i]); +} + +/* F - print file handler */ +int +print_header_begin (char *arg[NARGS], size_t *exp_count, void **data ARG_UNUSED) +{ + if (exp_count) + *exp_count = 14; + return 0; +} + +void +print_header_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, void *call_data) +{ + fprintf (fp, _("\nFile Header: \n\n")); + fprintf (fp, _(" table = %lu\n"), + (unsigned long) gdbm_file->header->dir); + fprintf (fp, _(" table size = %d\n"), gdbm_file->header->dir_size); + fprintf (fp, _(" table bits = %d\n"), gdbm_file->header->dir_bits); + fprintf (fp, _(" block size = %d\n"), gdbm_file->header->block_size); + fprintf (fp, _(" bucket elems = %d\n"), gdbm_file->header->bucket_elems); + fprintf (fp, _(" bucket size = %d\n"), gdbm_file->header->bucket_size); + fprintf (fp, _(" header magic = %x\n"), gdbm_file->header->header_magic); + fprintf (fp, _(" next block = %lu\n"), + (unsigned long) gdbm_file->header->next_block); + fprintf (fp, _(" avail size = %d\n"), gdbm_file->header->avail.size); + fprintf (fp, _(" avail count = %d\n"), gdbm_file->header->avail.count); + fprintf (fp, _(" avail nx blk = %lu\n"), + (unsigned long) gdbm_file->header->avail.next_block); +} + +/* H key - hash the key */ +void +hash_handler (char *arg[NARGS], FILE *fp, void *call_data) +{ + datum key; + + key.dptr = arg[0]; + key.dsize = strlen (arg[0]) + key_z; + fprintf (fp, _("hash value = %x. \n"), _gdbm_hash (key)); +} + +/* K - print the bucket cache */ +int +print_cache_begin (char *arg[NARGS], size_t *exp_count, void **data ARG_UNUSED) +{ + if (exp_count) + *exp_count = gdbm_file->bucket_cache ? gdbm_file->cache_size + 1 : 1; + return 0; +} + +void +print_cache_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, + void *call_data ARG_UNUSED) +{ + _gdbm_print_bucket_cache (fp, gdbm_file); +} + +/* V - print GDBM version */ +void +print_version_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, + void *call_data ARG_UNUSED) +{ + fprintf (fp, "%s\n", gdbm_version); +} + +/* < file [replace] - read entries from file and store */ +void +read_handler (char *arg[NARGS], FILE *fp, void *call_data ARG_UNUSED) +{ + read_from_file (arg[0], arg[1] && strcmp (arg[1], "replace") == 0); +} + +/* l - List all entries */ +int +list_begin (char *arg[NARGS], size_t *exp_count, void **data ARG_UNUSED) +{ + if (exp_count) + *exp_count = get_record_count (); + return 0; +} + +void +list_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, void *call_data) +{ + datum key; + datum data; + + key = gdbm_firstkey (gdbm_file); + while (key.dptr) + { + datum nextkey = gdbm_nextkey (gdbm_file, key); + + data = gdbm_fetch (gdbm_file, key); + if (!data.dptr) + error (0, _("cannot fetch data (key %.*s)"), key.dsize, key.dptr); + else + { + fprintf (fp, "%.*s %.*s\n", key.dsize, key.dptr, data.dsize, + data.dptr); + free (data.dptr); + } + free (key.dptr); + key = nextkey; + } +} + +/* q - quit the program */ +void +quit_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp ARG_UNUSED, + void *call_data ARG_UNUSED) +{ + if (gdbm_file != NULL) + gdbm_close (gdbm_file); + + exit (0); +} + +/* e file [truncate] - export to a flat file format */ +void +export_handler (char *arg[NARGS], FILE *fp, void *call_data ARG_UNUSED) +{ + int flags = GDBM_WRCREAT; + + if (arg[1] != NULL && strcmp (arg[1], "truncate") == 0) + flags = GDBM_NEWDB; + + if (gdbm_export (gdbm_file, arg[0], flags, 0600) == -1) + error (0, _("gdbm_export failed, %s"), gdbm_strerror (gdbm_errno)); +} + +/* i file [replace] - import from a flat file */ +void +import_handler (char *arg[NARGS], FILE *fp, void *call_data ARG_UNUSED) +{ + int flag = GDBM_INSERT; + + if (arg[1] != NULL && strcmp(arg[1], "replace") == 0) + flag = GDBM_REPLACE; + + if (gdbm_import (gdbm_file, arg[0], flag) == -1) + error (0, _("gdbm_import failed, %s"), gdbm_strerror (gdbm_errno)); +} + +static const char * +boolstr (int val) +{ + return val ? _("yes") : _("no"); +} + +/* S - print current program status */ +void +status_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, + void *call_data ARG_UNUSED) +{ + fprintf (fp, _("Database file: %s\n"), file_name); + fprintf (fp, _("Zero terminated keys: %s\n"), boolstr (key_z)); + fprintf (fp, _("Zero terminated data: %s\n"), boolstr (data_z)); +} + +/* z - toggle key nul-termination */ +void +key_z_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, + void *call_data ARG_UNUSED) +{ + key_z = !key_z; + fprintf (fp, _("Zero terminated keys: %s\n"), boolstr (key_z)); +} + +/* Z - toggle data nul-termination */ +void +data_z_handler (char *arg[NARGS] ARG_UNUSED, FILE *fp, + void *call_data ARG_UNUSED) +{ + data_z = !data_z; + fprintf (fp, "Zero terminated data: %s\n", boolstr (data_z)); +} + + +void help_handler (char *arg[NARGS], FILE *fp, void *call_data); +int help_begin (char *arg[NARGS], size_t *exp_count, void **data); + +struct command +{ + char *name; /* Command name */ + size_t minlen; /* Minimal unambiguous length */ + int abbrev; /* Single-letter shortkey (optional) */ + int (*begin) (char *[NARGS], size_t *, void **); + void (*handler) (char *[NARGS], FILE *fp, void *call_data); + void (*end) (void *data); + char *args[NARGS]; + char *doc; +}; + + +struct command command_tab[] = { + { "count", 0, 'c', + NULL, count_handler, NULL, + { NULL, NULL, }, N_("count (number of entries)") }, + { "delete", 0, 'd', + NULL, delete_handler, NULL, + { N_("key"), NULL, }, N_("delete") }, + { "export", 0, 'e', + NULL, export_handler, NULL, + { N_("file"), "[truncate]", }, N_("export") }, + { "fetch", 0, 'f', + NULL, fetch_handler, NULL, + { N_("key"), NULL }, N_("fetch") }, + { "import", 0, 'i', + NULL, import_handler, NULL, + { N_("file"), "[replace]", }, N_("import") }, + { "list", 0, 'l', + list_begin, list_handler, NULL, + { NULL, NULL }, N_("list") }, + { "next", 0, 'n', + NULL, nextkey_handler, NULL, + { N_("[key]"), NULL }, N_("nextkey") }, + { "store", 0, 's', + NULL, store_handler, NULL, + { N_("key"), N_("data") }, N_("store") }, + { "first", 0, '1', + NULL, firstkey_handler, NULL, + { NULL, NULL }, N_("firstkey") }, + { "read", 0, '<', + NULL, read_handler, NULL, + { N_("file"), "[replace]" }, + N_("read entries from file and store") }, + { "reorganize", 0, 'r', + NULL, reorganize_handler, NULL, + { NULL, NULL, }, N_("reorganize") }, + { "key-zero", 0, 'z', + NULL, key_z_handler, NULL, + { NULL, NULL }, N_("toggle key nul-termination") }, + { "avail", 0, 'A', + avail_begin, avail_handler, NULL, + { NULL, NULL, }, N_("print avail list") }, + { "bucket", 0, 'B', + print_bucket_begin, print_current_bucket_handler, NULL, + { N_("bucket-number"), NULL, }, N_("print a bucket") }, + { "current", 0, 'C', + print_current_bucket_begin, print_current_bucket_handler, NULL, + { NULL, NULL, }, + N_("print current bucket") }, + { "dir", 0, 'D', + print_dir_begin, print_dir_handler, NULL, + { NULL, NULL, }, N_("print hash directory") }, + { "header", 0, 'F', + print_header_begin , print_header_handler, NULL, + { NULL, NULL, }, N_("print file header") }, + { "hash", 0, 'H', + NULL, hash_handler, NULL, + { N_("key"), NULL, }, N_("hash value of key") }, + { "cache", 0, 'K', + print_cache_begin, print_cache_handler, NULL, + { NULL, NULL, }, N_("print the bucket cache") }, + { "status", 0, 'S', + NULL, status_handler, NULL, + { NULL, NULL }, N_("print current program status") }, + { "version", 0, 'v', + NULL, print_version_handler, NULL, + { NULL, NULL, }, N_("print version of gdbm") }, + { "data-zero", 0, 'Z', + NULL, data_z_handler, NULL, + { NULL, NULL }, N_("toggle data nul-termination") }, + { "help", 0, '?', + help_begin, help_handler, NULL, + { NULL, NULL, }, N_("print this help list") }, + { "quit", 0, 'q', + NULL, quit_handler, NULL, + { NULL, NULL, }, N_("quit the program") }, + { 0 } +}; + +static int +cmdcmp (const void *a, const void *b) +{ + struct command const *ac = a; + struct command const *bc = b; + return strcmp (ac->name, bc->name); +} + +void +set_minimal_abbreviations () +{ + struct command *cmd; + + qsort (command_tab, sizeof (command_tab) / sizeof (command_tab[0]) - 1, + sizeof (command_tab[0]), cmdcmp); + + /* Initialize minimum abbreviation + lengths to 1. */ + for (cmd = command_tab; cmd->name; cmd++) + cmd->minlen = 1; + /* Determine minimum abbreviations */ + for (cmd = command_tab; cmd->name; cmd++) + { + const char *sample = cmd->name; + size_t sample_len = strlen (sample); + size_t minlen = cmd->minlen; + struct command *p; + + for (p = cmd + 1; p->name; p++) + { + size_t len = strlen (p->name); + if (len >= minlen && memcmp (p->name, sample, minlen) == 0) + do + { + minlen++; + if (minlen <= len) + p->minlen = minlen; + if (minlen == sample_len) + break; + } + while (len >= minlen && memcmp (p->name, sample, minlen) == 0); + else if (p->name[0] == sample[0]) + p->minlen = minlen; + else + break; + } + if (minlen <= sample_len) + cmd->minlen = minlen; + } +} + + +/* ? - help handler */ +#define CMDCOLS 30 + +int +help_begin (char *arg[NARGS], size_t *exp_count, void **data) +{ + if (exp_count) + *exp_count = sizeof (command_tab) / sizeof (command_tab[0]) + 1; + return 0; +} + +void +help_handler (char *arg[NARGS], FILE *fp, void *call_data) +{ + struct command *cmd; + + for (cmd = command_tab; cmd->name; cmd++) + { + int i; + int n; + + if (cmd->abbrev) + n = fprintf (fp, " %c, ", cmd->abbrev); + else + n = fprintf (fp, " "); + if (cmd->name[cmd->minlen]) + n += fprintf (fp, "%.*s(%s)", cmd->minlen, cmd->name, + cmd->name + cmd->minlen); + else + n += fprintf (fp, "%s", cmd->name); + + for (i = 0; i < NARGS && cmd->args[i]; i++) + n += fprintf (fp, " %s", gettext (cmd->args[i])); + + if (n < CMDCOLS) + fprintf (fp, "%*.s", CMDCOLS-n, ""); + fprintf (fp, " %s", gettext (cmd->doc)); + fputc ('\n', fp); + } +} + +struct command * +find_command (char *str) +{ + struct command *cmd; + size_t len = strlen (str); + + for (cmd = command_tab; cmd->name; cmd++) + if (len >= cmd->minlen && memcmp (cmd->name, str, len) == 0) + return cmd; + + if (len == 1) + { + for (cmd = command_tab; cmd->name; cmd++) + if (cmd->abbrev == *str) + return cmd; + } + return NULL; +} + +#define SKIPWS(p) while (*(p) && isspace (*(p))) (p)++ +#define SKIPWORD(p) while (*(p) && !isspace (*(p))) (p)++ + +char * +getword (char *s, char **endp) +{ + char *p; + SKIPWS (s); + p = s; + SKIPWORD (s); + if (*s) + { + *s++ = 0; + SKIPWS (s); + } + *endp = s; + return p; +} + +/* The test program allows one to call all the routines plus the hash function. + The commands are single letter commands. The user is prompted for all other + information. See the help command (?) for a list of all commands. */ + +int +main (int argc, char *argv[]) +{ + char cmdbuf[1000]; + + int cache_size = DEFAULT_CACHESIZE; + int block_size = 0; + + int opt; + char reader = FALSE; + char newdb = FALSE; + int flags = 0; + char *pager = getenv ("PAGER"); + + progname = strrchr (argv[0], '/'); + if (progname) + progname++; + else + progname = argv[0]; + +#ifdef HAVE_SETLOCALE + setlocale (LC_ALL, ""); +#endif + bindtextdomain (PACKAGE, LOCALEDIR); + textdomain (PACKAGE); + + set_minimal_abbreviations (); + + /* Argument checking. */ + if (argc == 2) + { + if (strcmp (argv[1], "--help") == 0) + { + usage (); + exit (0); + } + else if (strcmp (argv[1], "--version") == 0) + { + version (); + exit (0); + } + } + + opterr = 0; + while ((opt = getopt (argc, argv, "lmsrnc:b:g:hv")) != -1) + switch (opt) + { + case 'h': + usage (); + exit (0); + + case 'l': + flags = flags | GDBM_NOLOCK; + break; + + case 'm': + flags = flags | GDBM_NOMMAP; + break; + + case 's': + if (reader) + error (2, _("-s is incompatible with -r")); + + flags = flags | GDBM_SYNC; + break; + + case 'r': + if (newdb) + error (2, _("-r is incompatible with -n")); + + reader = TRUE; + break; + + case 'n': + if (reader) + error (2, _("-n is incompatible with -r")); + + newdb = TRUE; + break; + + case 'c': + cache_size = atoi (optarg); + break; + + case 'b': + block_size = atoi (optarg); + break; + + case 'g': + file_name = optarg; + break; + + case 'v': + version (); + exit (0); + + default: + error (2, _("unknown option; try `%s -h' for more info\n"), progname); + } + + if (file_name == NULL) + file_name = "junk.gdbm"; + + /* Initialize variables. */ + interactive = isatty (0); + + if (reader) + { + gdbm_file = gdbm_open (file_name, block_size, GDBM_READER, 00664, NULL); + } + else if (newdb) + { + gdbm_file = + gdbm_open (file_name, block_size, GDBM_NEWDB | flags, 00664, NULL); + } + else + { + gdbm_file = + gdbm_open (file_name, block_size, GDBM_WRCREAT | flags, 00664, NULL); + } + if (gdbm_file == NULL) + error (2, _("gdbm_open failed: %s"), gdbm_strerror (gdbm_errno)); + + if (gdbm_setopt (gdbm_file, GDBM_CACHESIZE, &cache_size, sizeof (int)) == + -1) + error (2, _("gdbm_setopt failed: %s"), gdbm_strerror (gdbm_errno)); + + signal (SIGPIPE, SIG_IGN); + + /* Welcome message. */ + if (interactive) + printf (_("\nWelcome to the gdbm test program. Type ? for help.\n\n")); + + while (1) + { + int i; + char *p, *sp; + char argbuf[NARGS][128]; + char *args[NARGS]; + struct command *cmd; + void *call_data; + size_t expected_lines, *expected_lines_ptr; + FILE *out; + + if (interactive) + { + printf ("%s", prompt); + fflush (stdout); + } + + if (fgets (cmdbuf, sizeof cmdbuf, stdin) == NULL) + { + putchar ('\n'); + break; + } + + trimnl (cmdbuf); + p = getword (cmdbuf, &sp); + if (!*p) + continue; + cmd = find_command (p); + if (!cmd) + { + error (0, + interactive ? _("Invalid command. Try ? for help.") : + _("Unknown command")); + continue; + } + + memset (args, 0, sizeof (args)); + for (i = 0; i < NARGS && cmd->args[i]; i++) + { + p = i < NARGS-1 ? getword (sp, &sp) : sp; + if (!*p) + { + char *arg = cmd->args[i]; + if (*arg == '[') + /* Optional argument */ + break; + if (!interactive) + error (1, _("%s: not enough arguments"), cmd->name); + + + printf ("%s? ", arg); + if (fgets (argbuf[i], sizeof argbuf[i], stdin) == NULL) + error (1, _("unexpected eof")); + + trimnl (argbuf[i]); + args[i] = argbuf[i]; + } + else + args[i] = p; + } + + /* Prepare for calling the handler */ + call_data = NULL; + expected_lines = 0; + expected_lines_ptr = (interactive && pager) ? &expected_lines : NULL; + out = NULL; + if (cmd->begin && cmd->begin (args, expected_lines_ptr, &call_data)) + continue; + if (pager && expected_lines > get_screen_lines ()) + { + out = popen (pager, "w"); + if (!out) + { + error (0, _("cannot run pager `%s': %s"), pager, + strerror (errno)); + pager = NULL; + } + } + + cmd->handler (args, out ? out : stdout, call_data); + if (cmd->end) + cmd->end (call_data); + else if (call_data) + free (call_data); + + if (out) + pclose (out); + } + + /* Quit normally. */ + quit_handler (NULL, stdout, NULL); + return 0; +} diff --git a/src/update.c b/src/update.c new file mode 100644 index 0000000..faefe4f --- /dev/null +++ b/src/update.c @@ -0,0 +1,114 @@ +/* update.c - The routines for updating the file to a consistent state. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +/* Include system configuration before all else. */ +#include "autoconf.h" + +#include "gdbmdefs.h" + +static void write_header (GDBM_FILE); + +/* This procedure writes the header back to the file described by DBF. */ + +static void +write_header (GDBM_FILE dbf) +{ + off_t file_pos; /* Return value for lseek. */ + int rc; + + file_pos = __lseek (dbf, 0L, SEEK_SET); + if (file_pos != 0) _gdbm_fatal (dbf, _("lseek error")); + rc = _gdbm_full_write (dbf, dbf->header, dbf->header->block_size); + if (rc) + _gdbm_fatal (dbf, gdbm_strerror (rc)); + + /* Sync the file if fast_write is FALSE. */ + if (dbf->fast_write == FALSE) + __fsync (dbf); +} + + +/* After all changes have been made in memory, we now write them + all to disk. */ +void +_gdbm_end_update (GDBM_FILE dbf) +{ + off_t file_pos; /* Return value for lseek. */ + int rc; + + /* Write the current bucket. */ + if (dbf->bucket_changed && (dbf->cache_entry != NULL)) + { + _gdbm_write_bucket (dbf, dbf->cache_entry); + dbf->bucket_changed = FALSE; + } + + /* Write the other changed buckets if there are any. */ + if (dbf->second_changed) + { + if (dbf->bucket_cache != NULL) + { + int index; + + for (index = 0; index < dbf->cache_size; index++) + { + if (dbf->bucket_cache[index].ca_changed) + _gdbm_write_bucket (dbf, &dbf->bucket_cache[index]); + } + } + dbf->second_changed = FALSE; + } + + /* Write the directory. */ + if (dbf->directory_changed) + { + file_pos = __lseek (dbf, dbf->header->dir, SEEK_SET); + if (file_pos != dbf->header->dir) _gdbm_fatal (dbf, _("lseek error")); + rc = _gdbm_full_write (dbf, dbf->dir, dbf->header->dir_size); + if (rc) + _gdbm_fatal (dbf, gdbm_strerror (rc)); + dbf->directory_changed = FALSE; + if (!dbf->header_changed && dbf->fast_write == FALSE) + __fsync (dbf); + } + + /* Final write of the header. */ + if (dbf->header_changed) + { + write_header (dbf); + dbf->header_changed = FALSE; + } +} + + +/* If a fatal error is detected, come here and exit. VAL tells which fatal + error occured. */ + +void +_gdbm_fatal (GDBM_FILE dbf, const char *val) +{ + if ((dbf != NULL) && (dbf->fatal_err != NULL)) + (*dbf->fatal_err) (val); + else + { + fprintf (stderr, _("gdbm fatal: %s\n"), val ? val : ""); + } + exit (1); + /* NOTREACHED */ +} diff --git a/src/version.c b/src/version.c new file mode 100644 index 0000000..ed33342 --- /dev/null +++ b/src/version.c @@ -0,0 +1,57 @@ +/* version.c - This is file contains the version number for gdbm source. */ + +/* This file is part of GDBM, the GNU data base manager. + Copyright (C) 1990, 1991, 1993, 2007, 2011 Free Software Foundation, + Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . */ + +#include "autoconf.h" +#include "gdbm.h" + +/* Keep a string with the version number in it. + The DIST_DATE magic below is replaced by the actual date when + making the distdir. */ +const char * gdbm_version = "GDBM version " PACKAGE_VERSION ". " +"13/11/2011" +#if defined(__STDC__) && defined(__DATE__) && defined(__TIME__) + " (built " __DATE__ " " __TIME__ ")" +#endif +; +int const gdbm_version_number[3] = { + GDBM_VERSION_MAJOR, + GDBM_VERSION_MINOR, + GDBM_VERSION_PATCH +}; + +int +gdbm_version_cmp (int const a[], int const b[]) +{ + if (a[0] > b[0]) + return 1; + else if (a[0] < b[0]) + return -1; + + if (a[1] > b[1]) + return 1; + else if (a[1] < b[1]) + return -1; + + if (a[2] > b[2]) + return 1; + else if (a[2] < b[2]) + return -1; + + return 0; +} diff --git a/tests/Makefile.am b/tests/Makefile.am new file mode 100644 index 0000000..95d7fff --- /dev/null +++ b/tests/Makefile.am @@ -0,0 +1,135 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +EXTRA_DIST = \ + $(TESTSUITE_AT)\ + testsuite\ + package.m4 + +DISTCLEANFILES = atconfig +MAINTAINERCLEANFILES = Makefile.in $(TESTSUITE) + + +## ------------ ## +## package.m4. ## +## ------------ ## + +$(srcdir)/package.m4: $(top_srcdir)/configure.ac $(srcdir)/Makefile.am + $(AM_V_GEN){ \ + echo '# Signature of the current package.'; \ + echo 'm4_define([AT_PACKAGE_NAME], [@PACKAGE_NAME@])'; \ + echo 'm4_define([AT_PACKAGE_TARNAME], [@PACKAGE_TARNAME@])'; \ + echo 'm4_define([AT_PACKAGE_VERSION], [@PACKAGE_VERSION@])'; \ + echo 'm4_define([AT_PACKAGE_VERSION_MAJOR], [@GDBM_VERSION_MAJOR@])'; \ + echo 'm4_define([AT_PACKAGE_VERSION_MINOR], [@GDBM_VERSION_MINOR@])'; \ + echo 'm4_define([AT_PACKAGE_VERSION_PATCH], [@GDBM_VERSION_PATCH@])'; \ + echo 'm4_define([AT_PACKAGE_STRING], [@PACKAGE_STRING@])'; \ + echo 'm4_define([AT_PACKAGE_BUGREPORT], [@PACKAGE_BUGREPORT@])'; \ + } >$(srcdir)/package.m4 + +# + +## ------------ ## +## Test suite. ## +## ------------ ## + +TESTSUITE_AT = \ + testsuite.at\ + cloexec00.at\ + cloexec01.at\ + cloexec02.at\ + cloexec03.at\ + dbmcreate00.at\ + dbmdel00.at\ + dbmdel01.at\ + dbmdel02.at\ + dbmcvt.at\ + dbmfetch00.at\ + dbmfetch01.at\ + dbmfetch02.at\ + dbmfetch03.at\ + create00.at\ + delete00.at\ + delete01.at\ + delete02.at\ + fetch00.at\ + fetch01.at\ + setopt00.at\ + setopt01.at\ + version.at + +TESTSUITE = $(srcdir)/testsuite +M4=m4 + +AUTOTEST = $(AUTOM4TE) --language=autotest +$(TESTSUITE): package.m4 $(TESTSUITE_AT) + $(AUTOTEST) -I $(srcdir) testsuite.at -o $@.tmp + mv $@.tmp $@ + +atconfig: $(top_builddir)/config.status + cd $(top_builddir) && ./config.status tests/$@ + +clean-local: + test ! -f $(TESTSUITE) || $(SHELL) $(TESTSUITE) --clean + +check-local: atconfig atlocal $(TESTSUITE) + $(SHELL) $(TESTSUITE) + +# Run the test suite on the *installed* tree. +#installcheck-local: +# $(SHELL) $(TESTSUITE) AUTOTEST_PATH=$(exec_prefix)/bin + +## --------------- ## +## num2word et al. ## +## --------------- ## + +if COMPAT_OPT + DBMINCLUDES = -I$(top_srcdir)/compat + DBMPROGS = dtload dtdump dtfetch dtdel d_creat_ce +endif + +check_PROGRAMS = \ + fdop\ + g_open_ce\ + g_reorg_ce\ + gtdel\ + gtdump\ + gtfetch\ + gtload\ + gtopt\ + gtver\ + num2word\ + $(DBMPROGS) + +INCLUDES = -I$(top_srcdir)/src -I$(top_builddir)/src $(DBMINCLUDES) +noinst_HEADERS=progname.h +gtdel_LDADD = ../src/libgdbm.la +gtload_LDADD = ../src/libgdbm.la +gtdump_LDADD = ../src/libgdbm.la +gtfetch_LDADD = ../src/libgdbm.la +gtver_LDADD = ../src/libgdbm.la +gtopt_LDADD = ../src/libgdbm.la + +g_open_ce_LDADD = ../src/libgdbm.la +g_reorg_ce_LDADD = ../src/libgdbm.la + +dtload_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la +dtdump_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la +dtfetch_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la +dtdel_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la +d_creat_ce_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la + + diff --git a/tests/Makefile.in b/tests/Makefile.in new file mode 100644 index 0000000..a7a7e39 --- /dev/null +++ b/tests/Makefile.in @@ -0,0 +1,728 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +check_PROGRAMS = fdop$(EXEEXT) g_open_ce$(EXEEXT) g_reorg_ce$(EXEEXT) \ + gtdel$(EXEEXT) gtdump$(EXEEXT) gtfetch$(EXEEXT) \ + gtload$(EXEEXT) gtopt$(EXEEXT) gtver$(EXEEXT) \ + num2word$(EXEEXT) $(am__EXEEXT_1) +subdir = tests +DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/atlocal.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/autoconf.h +CONFIG_CLEAN_FILES = atlocal +CONFIG_CLEAN_VPATH_FILES = +@COMPAT_OPT_TRUE@am__EXEEXT_1 = dtload$(EXEEXT) dtdump$(EXEEXT) \ +@COMPAT_OPT_TRUE@ dtfetch$(EXEEXT) dtdel$(EXEEXT) \ +@COMPAT_OPT_TRUE@ d_creat_ce$(EXEEXT) +d_creat_ce_SOURCES = d_creat_ce.c +d_creat_ce_OBJECTS = d_creat_ce.$(OBJEXT) +d_creat_ce_DEPENDENCIES = ../src/libgdbm.la \ + ../compat/libgdbm_compat.la +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +dtdel_SOURCES = dtdel.c +dtdel_OBJECTS = dtdel.$(OBJEXT) +dtdel_DEPENDENCIES = ../src/libgdbm.la ../compat/libgdbm_compat.la +dtdump_SOURCES = dtdump.c +dtdump_OBJECTS = dtdump.$(OBJEXT) +dtdump_DEPENDENCIES = ../src/libgdbm.la ../compat/libgdbm_compat.la +dtfetch_SOURCES = dtfetch.c +dtfetch_OBJECTS = dtfetch.$(OBJEXT) +dtfetch_DEPENDENCIES = ../src/libgdbm.la ../compat/libgdbm_compat.la +dtload_SOURCES = dtload.c +dtload_OBJECTS = dtload.$(OBJEXT) +dtload_DEPENDENCIES = ../src/libgdbm.la ../compat/libgdbm_compat.la +fdop_SOURCES = fdop.c +fdop_OBJECTS = fdop.$(OBJEXT) +fdop_LDADD = $(LDADD) +g_open_ce_SOURCES = g_open_ce.c +g_open_ce_OBJECTS = g_open_ce.$(OBJEXT) +g_open_ce_DEPENDENCIES = ../src/libgdbm.la +g_reorg_ce_SOURCES = g_reorg_ce.c +g_reorg_ce_OBJECTS = g_reorg_ce.$(OBJEXT) +g_reorg_ce_DEPENDENCIES = ../src/libgdbm.la +gtdel_SOURCES = gtdel.c +gtdel_OBJECTS = gtdel.$(OBJEXT) +gtdel_DEPENDENCIES = ../src/libgdbm.la +gtdump_SOURCES = gtdump.c +gtdump_OBJECTS = gtdump.$(OBJEXT) +gtdump_DEPENDENCIES = ../src/libgdbm.la +gtfetch_SOURCES = gtfetch.c +gtfetch_OBJECTS = gtfetch.$(OBJEXT) +gtfetch_DEPENDENCIES = ../src/libgdbm.la +gtload_SOURCES = gtload.c +gtload_OBJECTS = gtload.$(OBJEXT) +gtload_DEPENDENCIES = ../src/libgdbm.la +gtopt_SOURCES = gtopt.c +gtopt_OBJECTS = gtopt.$(OBJEXT) +gtopt_DEPENDENCIES = ../src/libgdbm.la +gtver_SOURCES = gtver.c +gtver_OBJECTS = gtver.$(OBJEXT) +gtver_DEPENDENCIES = ../src/libgdbm.la +num2word_SOURCES = num2word.c +num2word_OBJECTS = num2word.$(OBJEXT) +num2word_LDADD = $(LDADD) +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = d_creat_ce.c dtdel.c dtdump.c dtfetch.c dtload.c fdop.c \ + g_open_ce.c g_reorg_ce.c gtdel.c gtdump.c gtfetch.c gtload.c \ + gtopt.c gtver.c num2word.c +DIST_SOURCES = d_creat_ce.c dtdel.c dtdump.c dtfetch.c dtload.c fdop.c \ + g_open_ce.c g_reorg_ce.c gtdel.c gtdump.c gtfetch.c gtload.c \ + gtopt.c gtver.c num2word.c +HEADERS = $(noinst_HEADERS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOM4TE = @AUTOM4TE@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GDBM183_INCLUDEDIR = @GDBM183_INCLUDEDIR@ +GDBM183_LIBDIR = @GDBM183_LIBDIR@ +GDBM183_LIBRARY = @GDBM183_LIBRARY@ +GDBM_VERSION_MAJOR = @GDBM_VERSION_MAJOR@ +GDBM_VERSION_MINOR = @GDBM_VERSION_MINOR@ +GDBM_VERSION_PATCH = @GDBM_VERSION_PATCH@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +EXTRA_DIST = \ + $(TESTSUITE_AT)\ + testsuite\ + package.m4 + +DISTCLEANFILES = atconfig +MAINTAINERCLEANFILES = Makefile.in $(TESTSUITE) + +# +TESTSUITE_AT = \ + testsuite.at\ + cloexec00.at\ + cloexec01.at\ + cloexec02.at\ + cloexec03.at\ + dbmcreate00.at\ + dbmdel00.at\ + dbmdel01.at\ + dbmdel02.at\ + dbmcvt.at\ + dbmfetch00.at\ + dbmfetch01.at\ + dbmfetch02.at\ + dbmfetch03.at\ + create00.at\ + delete00.at\ + delete01.at\ + delete02.at\ + fetch00.at\ + fetch01.at\ + setopt00.at\ + setopt01.at\ + version.at + +TESTSUITE = $(srcdir)/testsuite +M4 = m4 +AUTOTEST = $(AUTOM4TE) --language=autotest + +# Run the test suite on the *installed* tree. +#installcheck-local: +# $(SHELL) $(TESTSUITE) AUTOTEST_PATH=$(exec_prefix)/bin +@COMPAT_OPT_TRUE@DBMINCLUDES = -I$(top_srcdir)/compat +@COMPAT_OPT_TRUE@DBMPROGS = dtload dtdump dtfetch dtdel d_creat_ce +INCLUDES = -I$(top_srcdir)/src -I$(top_builddir)/src $(DBMINCLUDES) +noinst_HEADERS = progname.h +gtdel_LDADD = ../src/libgdbm.la +gtload_LDADD = ../src/libgdbm.la +gtdump_LDADD = ../src/libgdbm.la +gtfetch_LDADD = ../src/libgdbm.la +gtver_LDADD = ../src/libgdbm.la +gtopt_LDADD = ../src/libgdbm.la +g_open_ce_LDADD = ../src/libgdbm.la +g_reorg_ce_LDADD = ../src/libgdbm.la +dtload_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la +dtdump_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la +dtfetch_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la +dtdel_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la +d_creat_ce_LDADD = ../src/libgdbm.la ../compat/libgdbm_compat.la +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits tests/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnits tests/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +atlocal: $(top_builddir)/config.status $(srcdir)/atlocal.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ + +clean-checkPROGRAMS: + @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +d_creat_ce$(EXEEXT): $(d_creat_ce_OBJECTS) $(d_creat_ce_DEPENDENCIES) + @rm -f d_creat_ce$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(d_creat_ce_OBJECTS) $(d_creat_ce_LDADD) $(LIBS) +dtdel$(EXEEXT): $(dtdel_OBJECTS) $(dtdel_DEPENDENCIES) + @rm -f dtdel$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(dtdel_OBJECTS) $(dtdel_LDADD) $(LIBS) +dtdump$(EXEEXT): $(dtdump_OBJECTS) $(dtdump_DEPENDENCIES) + @rm -f dtdump$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(dtdump_OBJECTS) $(dtdump_LDADD) $(LIBS) +dtfetch$(EXEEXT): $(dtfetch_OBJECTS) $(dtfetch_DEPENDENCIES) + @rm -f dtfetch$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(dtfetch_OBJECTS) $(dtfetch_LDADD) $(LIBS) +dtload$(EXEEXT): $(dtload_OBJECTS) $(dtload_DEPENDENCIES) + @rm -f dtload$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(dtload_OBJECTS) $(dtload_LDADD) $(LIBS) +fdop$(EXEEXT): $(fdop_OBJECTS) $(fdop_DEPENDENCIES) + @rm -f fdop$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(fdop_OBJECTS) $(fdop_LDADD) $(LIBS) +g_open_ce$(EXEEXT): $(g_open_ce_OBJECTS) $(g_open_ce_DEPENDENCIES) + @rm -f g_open_ce$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(g_open_ce_OBJECTS) $(g_open_ce_LDADD) $(LIBS) +g_reorg_ce$(EXEEXT): $(g_reorg_ce_OBJECTS) $(g_reorg_ce_DEPENDENCIES) + @rm -f g_reorg_ce$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(g_reorg_ce_OBJECTS) $(g_reorg_ce_LDADD) $(LIBS) +gtdel$(EXEEXT): $(gtdel_OBJECTS) $(gtdel_DEPENDENCIES) + @rm -f gtdel$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(gtdel_OBJECTS) $(gtdel_LDADD) $(LIBS) +gtdump$(EXEEXT): $(gtdump_OBJECTS) $(gtdump_DEPENDENCIES) + @rm -f gtdump$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(gtdump_OBJECTS) $(gtdump_LDADD) $(LIBS) +gtfetch$(EXEEXT): $(gtfetch_OBJECTS) $(gtfetch_DEPENDENCIES) + @rm -f gtfetch$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(gtfetch_OBJECTS) $(gtfetch_LDADD) $(LIBS) +gtload$(EXEEXT): $(gtload_OBJECTS) $(gtload_DEPENDENCIES) + @rm -f gtload$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(gtload_OBJECTS) $(gtload_LDADD) $(LIBS) +gtopt$(EXEEXT): $(gtopt_OBJECTS) $(gtopt_DEPENDENCIES) + @rm -f gtopt$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(gtopt_OBJECTS) $(gtopt_LDADD) $(LIBS) +gtver$(EXEEXT): $(gtver_OBJECTS) $(gtver_DEPENDENCIES) + @rm -f gtver$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(gtver_OBJECTS) $(gtver_LDADD) $(LIBS) +num2word$(EXEEXT): $(num2word_OBJECTS) $(num2word_DEPENDENCIES) + @rm -f num2word$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(num2word_OBJECTS) $(num2word_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/d_creat_ce.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtdel.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtdump.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtfetch.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtload.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fdop.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/g_open_ce.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/g_reorg_ce.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtdel.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtdump.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtfetch.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtload.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtopt.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtver.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/num2word.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) + $(MAKE) $(AM_MAKEFLAGS) check-local +check: check-am +all-am: Makefile $(HEADERS) +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-checkPROGRAMS clean-generic clean-libtool clean-local \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: check-am install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am check-local clean \ + clean-checkPROGRAMS clean-generic clean-libtool clean-local \ + ctags distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am + + +$(srcdir)/package.m4: $(top_srcdir)/configure.ac $(srcdir)/Makefile.am + $(AM_V_GEN){ \ + echo '# Signature of the current package.'; \ + echo 'm4_define([AT_PACKAGE_NAME], [@PACKAGE_NAME@])'; \ + echo 'm4_define([AT_PACKAGE_TARNAME], [@PACKAGE_TARNAME@])'; \ + echo 'm4_define([AT_PACKAGE_VERSION], [@PACKAGE_VERSION@])'; \ + echo 'm4_define([AT_PACKAGE_VERSION_MAJOR], [@GDBM_VERSION_MAJOR@])'; \ + echo 'm4_define([AT_PACKAGE_VERSION_MINOR], [@GDBM_VERSION_MINOR@])'; \ + echo 'm4_define([AT_PACKAGE_VERSION_PATCH], [@GDBM_VERSION_PATCH@])'; \ + echo 'm4_define([AT_PACKAGE_STRING], [@PACKAGE_STRING@])'; \ + echo 'm4_define([AT_PACKAGE_BUGREPORT], [@PACKAGE_BUGREPORT@])'; \ + } >$(srcdir)/package.m4 +$(TESTSUITE): package.m4 $(TESTSUITE_AT) + $(AUTOTEST) -I $(srcdir) testsuite.at -o $@.tmp + mv $@.tmp $@ + +atconfig: $(top_builddir)/config.status + cd $(top_builddir) && ./config.status tests/$@ + +clean-local: + test ! -f $(TESTSUITE) || $(SHELL) $(TESTSUITE) --clean + +check-local: atconfig atlocal $(TESTSUITE) + $(SHELL) $(TESTSUITE) + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/tests/atlocal.in b/tests/atlocal.in new file mode 100644 index 0000000..8dc31d1 --- /dev/null +++ b/tests/atlocal.in @@ -0,0 +1,24 @@ +# @configure_input@ -*- shell-script -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +PATH=@abs_top_builddir@/src:$PATH + +@COMPAT_OPT_TRUE@COMPAT=1 +@COMPAT_OPT_FALSE@COMPAT=0 + + + + diff --git a/tests/cloexec00.at b/tests/cloexec00.at new file mode 100644 index 0000000..022b12f --- /dev/null +++ b/tests/cloexec00.at @@ -0,0 +1,25 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([cloexec: gdbm_open]) +AT_KEYWORDS([gdbm gdbm_open cloexec cloexec00]) + +AT_CHECK([ +g_open_ce "$abs_builddir/fdop" +], +0) + +AT_CLEANUP diff --git a/tests/cloexec01.at b/tests/cloexec01.at new file mode 100644 index 0000000..21baac6 --- /dev/null +++ b/tests/cloexec01.at @@ -0,0 +1,25 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([cloexec: gdbm_reorganize]) +AT_KEYWORDS([gdbm gdbm_reorganize cloexec cloexec01]) + +AT_CHECK([ +g_reorg_ce "$abs_builddir/fdop" +], +0) + +AT_CLEANUP diff --git a/tests/cloexec02.at b/tests/cloexec02.at new file mode 100644 index 0000000..9d1b7e3 --- /dev/null +++ b/tests/cloexec02.at @@ -0,0 +1,27 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([cloexec: dbm_open]) +AT_KEYWORDS([ndbm dbm_open cloexec cloexec02]) + +AT_CHECK([ +AT_COMPAT_PREREQ +num2word 1:10 | dtload file +d_creat_ce "$abs_builddir/fdop" +], +0) + +AT_CLEANUP diff --git a/tests/cloexec03.at b/tests/cloexec03.at new file mode 100644 index 0000000..5fa1c0f --- /dev/null +++ b/tests/cloexec03.at @@ -0,0 +1,26 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([cloexec: dbm_open -creat]) +AT_KEYWORDS([ndbm dbm_open cloexec cloexec03]) + +AT_CHECK([ +AT_COMPAT_PREREQ +d_creat_ce "$abs_builddir/fdop" -creat +], +0) + +AT_CLEANUP diff --git a/tests/create00.at b/tests/create00.at new file mode 100644 index 0000000..2e92fe7 --- /dev/null +++ b/tests/create00.at @@ -0,0 +1,29 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([create database]) +AT_KEYWORDS([gdbm create create00]) + +AT_CHECK([ +AT_SORT_PREREQ +num2word 1:1000 > input +gtload test.db < input +gtdump test.db | sort -k1,2 -n > output +diff -u input output +]) + +AT_CLEANUP + diff --git a/tests/d_creat_ce.c b/tests/d_creat_ce.c new file mode 100644 index 0000000..6a6cff2 --- /dev/null +++ b/tests/d_creat_ce.c @@ -0,0 +1,90 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include +#include +#include +#include + +char * +ntos (int n, char *buf, size_t size) +{ + char *p = buf + size; + *--p = 0; + do + { + int x = n % 10; + *--p = '0' + x; + n /= 10; + } + while (n); + return p; +} + +#ifndef O_CLOEXEC +# define O_CLOEXEC 0 +#endif + +int +main (int argc, char *argv[]) +{ + DBM *d; + char fdbuf[2][80]; + int i; + int flags = O_RDONLY; + + if (argc < 2) + { + fprintf (stderr, "usage: %s PATH-TO-FDOP [-creat] [-write]\n", argv[0]); + return 2; + } + + for (i = 2; i < argc; i++) + { + if (strcmp (argv[i], "-creat") == 0) + flags = O_RDWR|O_CREAT; + else if (strcmp (argv[i], "-write") == 0) + flags = O_RDWR; + else + { + fprintf (stderr, "%s: unknown option: %s\n", + argv[0], argv[i]); + return 2; + } + + } + + if (!O_CLOEXEC) + return 77; + + d = dbm_open ("file", flags|O_CLOEXEC, 0600); + if (!d) + { + perror ("dbm_open"); + return 3; + } + + execl (argv[1], "fdop", + ntos (dbm_pagfno (d), fdbuf[0], sizeof (fdbuf[0])), + ntos (dbm_dirfno (d), fdbuf[1], sizeof (fdbuf[1])), + NULL); + return 127; +} + diff --git a/tests/dbmcreate00.at b/tests/dbmcreate00.at new file mode 100644 index 0000000..f813061 --- /dev/null +++ b/tests/dbmcreate00.at @@ -0,0 +1,30 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([create database]) +AT_KEYWORDS([dbm create create00 dbmcreate00]) + +AT_CHECK([ +AT_COMPAT_PREREQ +AT_SORT_PREREQ +num2word 1:1000 > input +dtload test < input +dtdump test | sort -k1,2 -n > output +diff -u input output +]) + +AT_CLEANUP + diff --git a/tests/dbmcvt.at b/tests/dbmcvt.at new file mode 100644 index 0000000..c314c8e --- /dev/null +++ b/tests/dbmcvt.at @@ -0,0 +1,34 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([converting a 1.8-style database]) +AT_KEYWORDS([dbm fetch cvt]) + +AT_CHECK([ +AT_COMPAT_PREREQ +num2word 1:10 | dtload test +rm test.dir +ln test.pag test.dir +dtfetch test 6 +cmp test.pag test.dir >/dev/null 2>&1 && exit 1 +exit 0 +], +[0], +[six +]) + +AT_CLEANUP + diff --git a/tests/dbmdel00.at b/tests/dbmdel00.at new file mode 100644 index 0000000..8f76648 --- /dev/null +++ b/tests/dbmdel00.at @@ -0,0 +1,40 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([delete a record]) +AT_KEYWORDS([dbm delete delete00 dbmdel00]) + +AT_CHECK([ +AT_COMPAT_PREREQ +AT_SORT_PREREQ +num2word 1:10 | dtload test +dtdel test 8 +dtdump test | sort -k1,2 -n +], +[0], +[1 one +2 two +3 three +4 four +5 five +6 six +7 seven +9 nine +10 ten +]) + +AT_CLEANUP + diff --git a/tests/dbmdel01.at b/tests/dbmdel01.at new file mode 100644 index 0000000..e0b8f20 --- /dev/null +++ b/tests/dbmdel01.at @@ -0,0 +1,32 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([delete: non existing record]) +AT_KEYWORDS([dbm delete delete01 dbmdel01]) + +AT_CHECK([ +AT_COMPAT_PREREQ +AT_SORT_PREREQ +num2word 1:10 | dtload test +dtdel test 11 +], +[2], +[], +[dtdel: cannot delete 11: Item not found +]) + +AT_CLEANUP + diff --git a/tests/dbmdel02.at b/tests/dbmdel02.at new file mode 100644 index 0000000..79e5ef6 --- /dev/null +++ b/tests/dbmdel02.at @@ -0,0 +1,29 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([delete: all records]) +AT_KEYWORDS([dbm delete delete02 dbmdel02]) + +AT_CHECK([ +AT_COMPAT_PREREQ +num2word 1:10 | dtload test +dtdel test 1 2 3 4 5 6 7 8 9 10 +dtdump test +], +[0]) + +AT_CLEANUP + diff --git a/tests/dbmfetch00.at b/tests/dbmfetch00.at new file mode 100644 index 0000000..2eb3279 --- /dev/null +++ b/tests/dbmfetch00.at @@ -0,0 +1,32 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([fetch a record]) +AT_KEYWORDS([dbm fetch fetch00 dbmfetch00]) + +AT_CHECK([ +AT_COMPAT_PREREQ +num2word 1:10000 | dtload test +dtfetch test 1 2745 9999 +], +[0], +[one +two thousand seven hundred and fourty-five +nine thousand nine hundred and ninety-nine +]) + +AT_CLEANUP + diff --git a/tests/dbmfetch01.at b/tests/dbmfetch01.at new file mode 100644 index 0000000..ce74a16 --- /dev/null +++ b/tests/dbmfetch01.at @@ -0,0 +1,31 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([fetch: nonexisting record]) +AT_KEYWORDS([dbm fetch fetch01 dbmfetch01]) + +AT_CHECK([ +AT_COMPAT_PREREQ +num2word 1:10000 | dtload test +dtfetch test 0 +], +[2], +[], +[dtfetch: 0: not found +]) + +AT_CLEANUP + diff --git a/tests/dbmfetch02.at b/tests/dbmfetch02.at new file mode 100644 index 0000000..c581a22 --- /dev/null +++ b/tests/dbmfetch02.at @@ -0,0 +1,32 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([fetch from a read-only database]) +AT_KEYWORDS([dbm fetch fetch02 dbmfetch02]) + +AT_CHECK([ +AT_COMPAT_PREREQ +num2word 1:10 | dtload test +chmod -w test.dir test.pag +dtfetch test 6 10 +], +[0], +[six +ten +]) + +AT_CLEANUP + diff --git a/tests/dbmfetch03.at b/tests/dbmfetch03.at new file mode 100644 index 0000000..b1e149b --- /dev/null +++ b/tests/dbmfetch03.at @@ -0,0 +1,36 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([fetch from a read-only 1.8-style database]) +AT_KEYWORDS([dbm fetch fetch03 dbmfetch03]) + +AT_CHECK([ +AT_COMPAT_PREREQ +mkdir dir +cd dir +num2word 1:10 | dtload test +rm test.dir +ln test.pag test.dir +chmod -w test.dir test.pag . +dtfetch test 6 10 +], +[0], +[six +ten +]) + +AT_CLEANUP + diff --git a/tests/delete00.at b/tests/delete00.at new file mode 100644 index 0000000..ad98034 --- /dev/null +++ b/tests/delete00.at @@ -0,0 +1,39 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([delete a record]) +AT_KEYWORDS([gdbm delete delete00]) + +AT_CHECK([ +AT_SORT_PREREQ +num2word 1:10 | gtload test.db +gtdel test.db 8 +gtdump test.db | sort -k1,2 -n +], +[0], +[1 one +2 two +3 three +4 four +5 five +6 six +7 seven +9 nine +10 ten +]) + +AT_CLEANUP + diff --git a/tests/delete01.at b/tests/delete01.at new file mode 100644 index 0000000..ab7fe4b --- /dev/null +++ b/tests/delete01.at @@ -0,0 +1,31 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([delete: non existing record]) +AT_KEYWORDS([gdbm delete delete01]) + +AT_CHECK([ +AT_SORT_PREREQ +num2word 1:10 | gtload test.db +gtdel test.db 11 +], +[2], +[], +[gtdel: cannot delete 11: Item not found +]) + +AT_CLEANUP + diff --git a/tests/delete02.at b/tests/delete02.at new file mode 100644 index 0000000..6162c0b --- /dev/null +++ b/tests/delete02.at @@ -0,0 +1,28 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([delete: all records]) +AT_KEYWORDS([gdbm delete delete02]) + +AT_CHECK([ +num2word 1:10 | gtload test.db +gtdel test.db 1 2 3 4 5 6 7 8 9 10 +gtdump test.db +], +[0]) + +AT_CLEANUP + diff --git a/tests/dtdel.c b/tests/dtdel.c new file mode 100644 index 0000000..b7d0112 --- /dev/null +++ b/tests/dtdel.c @@ -0,0 +1,96 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include "dbm.h" +#include "progname.h" + +int +main (int argc, char **argv) +{ + const char *progname = canonical_progname (argv[0]); + char *dbname; + datum key; + int flags = 0; + int data_z = 0; + int rc = 0; + + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-h") == 0) + { + printf ("usage: %s [-null] [-nolock] [-nommap] [-sync] DBFILE KEY [KEY...]\n", + progname); + exit (0); + } + else if (strcmp (arg, "-null") == 0) + data_z = 1; + else if (strcmp (arg, "-nolock") == 0) + flags |= GDBM_NOLOCK; + else if (strcmp (arg, "-nommap") == 0) + flags |= GDBM_NOMMAP; + else if (strcmp (arg, "-sync") == 0) + flags |= GDBM_SYNC; + else if (strcmp (arg, "--") == 0) + { + --argc; + ++argv; + break; + } + else if (arg[0] == '-') + { + fprintf (stderr, "%s: unknown option %s\n", progname, arg); + exit (1); + } + else + break; + } + + if (argc < 2) + { + fprintf (stderr, "%s: wrong arguments\n", progname); + exit (1); + } + dbname = *argv; + + if (dbminit (dbname)) + { + fprintf (stderr, "dbminit failed\n"); + exit (1); + } + + while (--argc) + { + char *arg = *++argv; + + key.dptr = arg; + key.dsize = strlen (arg) + !!data_z; + + if (delete(key)) + { + fprintf (stderr, "%s: cannot delete %s: %s\n", + progname, arg, gdbm_strerror (gdbm_errno)); + rc = 2; + } + } + dbmclose (); + exit (rc); +} diff --git a/tests/dtdump.c b/tests/dtdump.c new file mode 100644 index 0000000..4e0aa3e --- /dev/null +++ b/tests/dtdump.c @@ -0,0 +1,97 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include "dbm.h" +#include "progname.h" + +int +main (int argc, char **argv) +{ + const char *progname = canonical_progname (argv[0]); + char *dbname; + datum key; + datum data; + int delim = '\t'; + + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-h") == 0) + { + printf ("usage: %s [-delim=CHR] DBFILE\n", progname); + exit (0); + } + else if (strncmp (arg, "-delim=", 7) == 0) + delim = arg[7]; + else if (strcmp (arg, "--") == 0) + { + --argc; + ++argv; + break; + } + else if (arg[0] == '-') + { + fprintf (stderr, "%s: unknown option %s\n", progname, arg); + exit (1); + } + else + break; + } + + if (argc != 1) + { + fprintf (stderr, "%s: wrong arguments\n", progname); + exit (1); + } + dbname = *argv; + + if (dbminit (dbname)) + { + fprintf (stderr, "dbminit failed\n"); + exit (1); + } + + for (key = firstkey (); key.dptr; key = nextkey (key)) + { + int i; + + for (i = 0; i < key.dsize && key.dptr[i]; i++) + { + if (key.dptr[i] == delim || key.dptr[i] == '\\') + fputc ('\\', stdout); + fputc (key.dptr[i], stdout); + } + + fputc (delim, stdout); + + data = fetch (key); + i = data.dsize; + if (data.dptr[i-1] == 0) + i--; + + fwrite (data.dptr, i, 1, stdout); + + fputc ('\n', stdout); + } + + dbmclose (); + exit (0); +} diff --git a/tests/dtfetch.c b/tests/dtfetch.c new file mode 100644 index 0000000..8a2686f --- /dev/null +++ b/tests/dtfetch.c @@ -0,0 +1,119 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include "dbm.h" +#include "progname.h" + +void +print_key (FILE *fp, datum key, int delim) +{ + size_t i; + + for (i = 0; i < key.dsize && key.dptr[i]; i++) + { + if (key.dptr[i] == delim || key.dptr[i] == '\\') + fputc ('\\', fp); + fputc (key.dptr[i], fp); + } +} + +int +main (int argc, char **argv) +{ + const char *progname = canonical_progname (argv[0]); + char *dbname; + datum key; + datum data; + int data_z = 0; + int delim = 0; + int rc = 0; + + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-h") == 0) + { + printf ("usage: %s [-null] [-delim=CHR] DBFILE KEY [KEY...]\n", + progname); + exit (0); + } + else if (strcmp (arg, "-null") == 0) + data_z = 1; + else if (strncmp (arg, "-delim=", 7) == 0) + delim = arg[7]; + else if (strcmp (arg, "--") == 0) + { + --argc; + ++argv; + break; + } + else if (arg[0] == '-') + { + fprintf (stderr, "%s: unknown option %s\n", progname, arg); + exit (1); + } + else + break; + } + + if (argc < 2) + { + fprintf (stderr, "%s: wrong arguments\n", progname); + exit (1); + } + dbname = *argv; + + if (dbminit (dbname)) + { + fprintf (stderr, "dbminit failed\n"); + exit (1); + } + + while (--argc) + { + char *arg = *++argv; + + key.dptr = arg; + key.dsize = strlen (arg) + !!data_z; + + data = fetch (key); + if (data.dptr == NULL) + { + rc = 2; + fprintf (stderr, "%s: ", progname); + print_key (stderr, key, delim); + fprintf (stderr, ": not found\n"); + continue; + } + if (delim) + { + print_key (stdout, key, delim); + fputc (delim, stdout); + } + + fwrite (data.dptr, data.dsize - !!data_z, 1, stdout); + + fputc ('\n', stdout); + } + + dbmclose (); + exit (rc); +} diff --git a/tests/dtload.c b/tests/dtload.c new file mode 100644 index 0000000..6ebd638 --- /dev/null +++ b/tests/dtload.c @@ -0,0 +1,151 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include +#include +#include +#include +#include +#include "dbm.h" +#include "progname.h" + +#define PAGSUF ".pag" + +int +main (int argc, char **argv) +{ + const char *progname = canonical_progname (argv[0]); + char *dbname; + int line = 0; + char buf[1024]; + datum key; + datum data; + int delim = '\t'; + int data_z = 0; + + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-h") == 0) + { + printf ("usage: %s [-null] [-delim=CHR] DBFILE\n", progname); + exit (0); + } + else if (strcmp (arg, "-null") == 0) + data_z = 1; + else if (strncmp (arg, "-delim=", 7) == 0) + delim = arg[7]; + else if (strcmp (arg, "--") == 0) + { + --argc; + ++argv; + break; + } + else if (arg[0] == '-') + { + fprintf (stderr, "%s: unknown option %s\n", progname, arg); + exit (1); + } + else + break; + } + + if (argc != 1) + { + fprintf (stderr, "%s: wrong arguments\n", progname); + exit (1); + } + + /* Check if .pag file exists. Create it if it doesn't, as DBM + cannot do it itself. */ + + dbname = malloc (strlen (*argv) + sizeof (PAGSUF)); + if (!dbname) + abort (); + + strcat (strcpy (dbname, *argv), PAGSUF); + + if (access (dbname, F_OK)) + { + int fd = creat (dbname, 0644); + if (fd < 0) + { + fprintf (stderr, "%s: ", progname); + perror (dbname); + exit (1); + } + close (fd); + } + free (dbname); + + if (dbminit (*argv)) + { + fprintf (stderr, "dbminit failed\n"); + exit (1); + } + + while (fgets (buf, sizeof buf, stdin)) + { + size_t i, j; + size_t len = strlen (buf); + + if (buf[len - 1] != '\n') + { + fprintf (stderr, "%s: %d: line too long\n", + progname, line); + continue; + } + + buf[--len] = 0; + + line++; + + for (i = j = 0; i < len; i++) + { + if (buf[i] == '\\') + i++; + else if (buf[i] == delim) + break; + else + buf[j++] = buf[i]; + } + + if (buf[i] != delim) + { + fprintf (stderr, "%s: %d: malformed line\n", + progname, line); + continue; + } + + key.dptr = buf; + key.dsize = j + data_z; + data.dptr = buf + j + 1; + data.dsize = strlen (buf + j + 1) + data_z; + if (store (key, data) != 0) + { + fprintf (stderr, "%s: %d: item not inserted\n", + progname, line); + exit (1); + } + } + dbmclose (); + exit (0); +} diff --git a/tests/fdop.c b/tests/fdop.c new file mode 100644 index 0000000..1729323 --- /dev/null +++ b/tests/fdop.c @@ -0,0 +1,36 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include + +/* usage: fdop FD [FD...] + Return: false if any of the FDs is open, true otherwise. +*/ +int +main (int argc, char **argv) +{ + int fd = dup (0); + + while (--argc) + { + int n = atoi (*++argv); + if (n < fd) + return 1; + } + return 0; +} diff --git a/tests/fetch00.at b/tests/fetch00.at new file mode 100644 index 0000000..0b2f48b --- /dev/null +++ b/tests/fetch00.at @@ -0,0 +1,31 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([fetch a record]) +AT_KEYWORDS([gdbm fetch fetch00]) + +AT_CHECK([ +num2word 1:10000 | gtload test.db +gtfetch test.db 1 2745 9999 +], +[0], +[one +two thousand seven hundred and fourty-five +nine thousand nine hundred and ninety-nine +]) + +AT_CLEANUP + diff --git a/tests/fetch01.at b/tests/fetch01.at new file mode 100644 index 0000000..8618b66 --- /dev/null +++ b/tests/fetch01.at @@ -0,0 +1,30 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([fetch: nonexisting record]) +AT_KEYWORDS([gdbm fetch fetch01]) + +AT_CHECK([ +num2word 1:10000 | gtload test.db +gtfetch test.db 0 +], +[2], +[], +[gtfetch: 0: not found +]) + +AT_CLEANUP + diff --git a/tests/g_open_ce.c b/tests/g_open_ce.c new file mode 100644 index 0000000..4f1fcd4 --- /dev/null +++ b/tests/g_open_ce.c @@ -0,0 +1,66 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include +#include + +char * +ntos (int n, char *buf, size_t size) +{ + char *p = buf + size; + *--p = 0; + do + { + int x = n % 10; + *--p = '0' + x; + n /= 10; + } + while (n); + return p; +} + +#ifndef O_CLOEXEC +# define O_CLOEXEC 0 +#endif + +int +main (int argc, char *argv[]) +{ + GDBM_FILE d; + char fdbuf[80]; + + if (argc != 2) + { + fprintf (stderr, "usage: %s PATH-TO-FDOP\n", argv[0]); + return 2; + } + if (!O_CLOEXEC) + return 77; + d = gdbm_open ("file.db", 0, GDBM_NEWDB|GDBM_CLOEXEC, 0600, NULL); + if (!d) + { + fprintf (stderr, "gdbm_open: %s\n", gdbm_strerror (gdbm_errno)); + return 3; + } + execl (argv[1], "fdop", + ntos (gdbm_fdesc (d), fdbuf, sizeof (fdbuf)), NULL); + return 127; +} + diff --git a/tests/g_reorg_ce.c b/tests/g_reorg_ce.c new file mode 100644 index 0000000..f72afa2 --- /dev/null +++ b/tests/g_reorg_ce.c @@ -0,0 +1,72 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include +#include + +char * +ntos (int n, char *buf, size_t size) +{ + char *p = buf + size; + *--p = 0; + do + { + int x = n % 10; + *--p = '0' + x; + n /= 10; + } + while (n); + return p; +} + +#ifndef O_CLOEXEC +# define O_CLOEXEC 0 +#endif + +int +main (int argc, char *argv[]) +{ + GDBM_FILE d; + char fdbuf[80]; + + if (argc != 2) + { + fprintf (stderr, "usage: %s PATH-TO-FDOP\n", argv[0]); + return 2; + } + if (!O_CLOEXEC) + return 77; + d = gdbm_open ("file.db", 0, GDBM_NEWDB|GDBM_CLOEXEC, 0600, NULL); + if (!d) + { + fprintf (stderr, "gdbm_open: %s\n", gdbm_strerror (gdbm_errno)); + return 3; + } + if (gdbm_reorganize (d)) + { + fprintf (stderr, "gdbm_reorganize: %s\n", + gdbm_strerror (gdbm_errno)); + return 3; + } + execl (argv[1], "fdop", + ntos (gdbm_fdesc (d), fdbuf, sizeof (fdbuf)), NULL); + return 127; +} + diff --git a/tests/gtdel.c b/tests/gtdel.c new file mode 100644 index 0000000..ff9cdb9 --- /dev/null +++ b/tests/gtdel.c @@ -0,0 +1,98 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include "gdbm.h" +#include "progname.h" + +int +main (int argc, char **argv) +{ + const char *progname = canonical_progname (argv[0]); + const char *dbname; + datum key; + int flags = 0; + GDBM_FILE dbf; + int data_z = 0; + int rc = 0; + + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-h") == 0) + { + printf ("usage: %s [-null] [-nolock] [-nommap] [-sync] DBFILE KEY [KEY...]\n", + progname); + exit (0); + } + else if (strcmp (arg, "-null") == 0) + data_z = 1; + else if (strcmp (arg, "-nolock") == 0) + flags |= GDBM_NOLOCK; + else if (strcmp (arg, "-nommap") == 0) + flags |= GDBM_NOMMAP; + else if (strcmp (arg, "-sync") == 0) + flags |= GDBM_SYNC; + else if (strcmp (arg, "--") == 0) + { + --argc; + ++argv; + break; + } + else if (arg[0] == '-') + { + fprintf (stderr, "%s: unknown option %s\n", progname, arg); + exit (1); + } + else + break; + } + + if (argc < 2) + { + fprintf (stderr, "%s: wrong arguments\n", progname); + exit (1); + } + dbname = *argv; + + dbf = gdbm_open (dbname, 0, GDBM_WRITER|flags, 0, NULL); + if (!dbf) + { + fprintf (stderr, "gdbm_open failed: %s\n", gdbm_strerror (gdbm_errno)); + exit (1); + } + + while (--argc) + { + char *arg = *++argv; + + key.dptr = arg; + key.dsize = strlen (arg) + !!data_z; + + if (gdbm_delete(dbf, key)) + { + fprintf (stderr, "%s: cannot delete %s: %s\n", + progname, arg, gdbm_strerror (gdbm_errno)); + rc = 2; + } + } + gdbm_close (dbf); + exit (rc); +} diff --git a/tests/gtdump.c b/tests/gtdump.c new file mode 100644 index 0000000..927a47c --- /dev/null +++ b/tests/gtdump.c @@ -0,0 +1,113 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include "gdbm.h" +#include "progname.h" + +int +main (int argc, char **argv) +{ + const char *progname = canonical_progname (argv[0]); + const char *dbname; + datum key; + datum data; + int flags = 0; + GDBM_FILE dbf; + int delim = '\t'; + + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-h") == 0) + { + printf ("usage: %s [-nolock] [-nommap] [-delim=CHR] DBFILE\n", + progname); + exit (0); + } + else if (strcmp (arg, "-nolock") == 0) + flags |= GDBM_NOLOCK; + else if (strcmp (arg, "-nommap") == 0) + flags |= GDBM_NOMMAP; + else if (strcmp (arg, "-sync") == 0) + flags |= GDBM_SYNC; + else if (strncmp (arg, "-delim=", 7) == 0) + delim = arg[7]; + else if (strcmp (arg, "--") == 0) + { + --argc; + ++argv; + break; + } + else if (arg[0] == '-') + { + fprintf (stderr, "%s: unknown option %s\n", progname, arg); + exit (1); + } + else + break; + } + + if (argc != 1) + { + fprintf (stderr, "%s: wrong arguments\n", progname); + exit (1); + } + dbname = *argv; + + dbf = gdbm_open (dbname, 0, GDBM_READER|flags, 00664, NULL); + if (!dbf) + { + fprintf (stderr, "gdbm_open failed: %s\n", gdbm_strerror (gdbm_errno)); + exit (1); + } + + key = gdbm_firstkey (dbf); + while (key.dptr) + { + size_t i; + datum nextkey = gdbm_nextkey (dbf, key); + + for (i = 0; i < key.dsize && key.dptr[i]; i++) + { + if (key.dptr[i] == delim || key.dptr[i] == '\\') + fputc ('\\', stdout); + fputc (key.dptr[i], stdout); + } + + fputc (delim, stdout); + + data = gdbm_fetch (dbf, key); + i = data.dsize; + if (data.dptr[i-1] == 0) + i--; + + fwrite (data.dptr, i, 1, stdout); + free (data.dptr); + + fputc ('\n', stdout); + + free (key.dptr); + key = nextkey; + } + + gdbm_close (dbf); + exit (0); +} diff --git a/tests/gtfetch.c b/tests/gtfetch.c new file mode 100644 index 0000000..0c254b7 --- /dev/null +++ b/tests/gtfetch.c @@ -0,0 +1,127 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include "gdbm.h" +#include "progname.h" + +void +print_key (FILE *fp, datum key, int delim) +{ + size_t i; + + for (i = 0; i < key.dsize && key.dptr[i]; i++) + { + if (key.dptr[i] == delim || key.dptr[i] == '\\') + fputc ('\\', fp); + fputc (key.dptr[i], fp); + } +} + +int +main (int argc, char **argv) +{ + const char *progname = canonical_progname (argv[0]); + const char *dbname; + datum key; + datum data; + int flags = 0; + GDBM_FILE dbf; + int data_z = 0; + int delim = 0; + int rc = 0; + + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-h") == 0) + { + printf ("usage: %s [-nolock] [-nommap] [-null] [-delim=CHR] DBFILE KEY [KEY...]\n", + progname); + exit (0); + } + else if (strcmp (arg, "-nolock") == 0) + flags |= GDBM_NOLOCK; + else if (strcmp (arg, "-nommap") == 0) + flags |= GDBM_NOMMAP; + else if (strcmp (arg, "-null") == 0) + data_z = 1; + else if (strncmp (arg, "-delim=", 7) == 0) + delim = arg[7]; + else if (strcmp (arg, "--") == 0) + { + --argc; + ++argv; + break; + } + else if (arg[0] == '-') + { + fprintf (stderr, "%s: unknown option %s\n", progname, arg); + exit (1); + } + else + break; + } + + if (argc < 2) + { + fprintf (stderr, "%s: wrong arguments\n", progname); + exit (1); + } + dbname = *argv; + + dbf = gdbm_open (dbname, 0, GDBM_READER|flags, 00664, NULL); + if (!dbf) + { + fprintf (stderr, "gdbm_open failed: %s\n", gdbm_strerror (gdbm_errno)); + exit (1); + } + + while (--argc) + { + char *arg = *++argv; + + key.dptr = arg; + key.dsize = strlen (arg) + !!data_z; + + data = gdbm_fetch (dbf, key); + if (data.dptr == NULL) + { + rc = 2; + fprintf (stderr, "%s: ", progname); + print_key (stderr, key, delim); + fprintf (stderr, ": not found\n"); + continue; + } + if (delim) + { + print_key (stdout, key, delim); + fputc (delim, stdout); + } + + fwrite (data.dptr, data.dsize - !!data_z, 1, stdout); + free (data.dptr); + + fputc ('\n', stdout); + } + + gdbm_close (dbf); + exit (rc); +} diff --git a/tests/gtload.c b/tests/gtload.c new file mode 100644 index 0000000..b89ae1f --- /dev/null +++ b/tests/gtload.c @@ -0,0 +1,174 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include +#include "gdbm.h" +#include "progname.h" + +int +main (int argc, char **argv) +{ + const char *progname = canonical_progname (argv[0]); + const char *dbname; + int line = 0; + char buf[1024]; + datum key; + datum data; + int replace = 0; + int flags = 0; + int mode = GDBM_WRCREAT; + int block_size = 0; + GDBM_FILE dbf; + int delim = '\t'; + int data_z = 0; + size_t mapped_size_max = 0; + + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-h") == 0) + { + printf ("usage: %s [-replace] [-clear] [-blocksize=N] [-null] [-nolock] [-nommap] [-maxmap=N] [-sync] [-delim=CHR] DBFILE\n", progname); + exit (0); + } + else if (strcmp (arg, "-replace") == 0) + replace |= GDBM_REPLACE; + else if (strcmp (arg, "-clear") == 0) + mode = GDBM_NEWDB; + else if (strcmp (arg, "-null") == 0) + data_z = 1; + else if (strcmp (arg, "-nolock") == 0) + flags |= GDBM_NOLOCK; + else if (strcmp (arg, "-nommap") == 0) + flags |= GDBM_NOMMAP; + else if (strcmp (arg, "-sync") == 0) + flags |= GDBM_SYNC; + else if (strncmp (arg, "-blocksize=", 11) == 0) + block_size = atoi (arg + 11); + else if (strncmp (arg, "-maxmap=", 8) == 0) + { + char *p; + + errno = 0; + mapped_size_max = strtoul (arg + 8, &p, 10); + + if (errno) + { + fprintf (stderr, "%s: ", progname); + perror ("maxmap"); + exit (1); + } + + if (*p) + { + fprintf (stderr, "%s: bad maxmap\n", progname); + exit (1); + } + } + else if (strncmp (arg, "-delim=", 7) == 0) + delim = arg[7]; + else if (strcmp (arg, "--") == 0) + { + --argc; + ++argv; + break; + } + else if (arg[0] == '-') + { + fprintf (stderr, "%s: unknown option %s\n", progname, arg); + exit (1); + } + else + break; + } + + if (argc != 1) + { + fprintf (stderr, "%s: wrong arguments\n", progname); + exit (1); + } + dbname = *argv; + + dbf = gdbm_open (dbname, block_size, mode|flags, 00664, NULL); + if (!dbf) + { + fprintf (stderr, "gdbm_open failed: %s\n", gdbm_strerror (gdbm_errno)); + exit (1); + } + + if (mapped_size_max) + { + if (gdbm_setopt (dbf, GDBM_SETMAXMAPSIZE, &mapped_size_max, + sizeof (mapped_size_max))) + { + fprintf (stderr, "gdbm_setopt failed: %s\n", + gdbm_strerror (gdbm_errno)); + exit (1); + } + } + + while (fgets (buf, sizeof buf, stdin)) + { + size_t i, j; + size_t len = strlen (buf); + + if (buf[len - 1] != '\n') + { + fprintf (stderr, "%s: %d: line too long\n", + progname, line); + continue; + } + + buf[--len] = 0; + + line++; + + for (i = j = 0; i < len; i++) + { + if (buf[i] == '\\') + i++; + else if (buf[i] == delim) + break; + else + buf[j++] = buf[i]; + } + + if (buf[i] != delim) + { + fprintf (stderr, "%s: %d: malformed line\n", + progname, line); + continue; + } + + key.dptr = buf; + key.dsize = j + data_z; + data.dptr = buf + j + 1; + data.dsize = strlen (buf + j + 1) + data_z; + if (gdbm_store (dbf, key, data, replace) != 0) + { + fprintf (stderr, "%s: %d: item not inserted\n", + progname, line); + exit (1); + } + } + gdbm_close (dbf); + exit (0); +} diff --git a/tests/gtopt.c b/tests/gtopt.c new file mode 100644 index 0000000..13ad8cc --- /dev/null +++ b/tests/gtopt.c @@ -0,0 +1,414 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include +#include +#include "gdbmdefs.h" +#include "progname.h" + +const char *progname; +const char *dbname; +int flags = 0; /* gdbm_open flags */ +int mode = GDBM_WRCREAT; /* gdbm_open mode */ +int block_size = 0; /* block size for the db. 0 means default */ +size_t mapped_size_max = 32768; /* size of the memory mapped region */ +size_t cache_size = 32; /* cache size */ + +static size_t +get_max_mmap_size (const char *arg) +{ + char *p; + size_t size; + + errno = 0; + size = strtoul (arg, &p, 10); + + if (errno) + { + fprintf (stderr, "%s: ", progname); + perror ("maxmap"); + exit (1); + } + + if (*p) + { + fprintf (stderr, "%s: bad maxmap\n", progname); + exit (1); + } + return size; +} + +/* Test results */ +#define RES_PASS 0 +#define RES_FAIL 1 +#define RES_XFAIL 2 +#define RES_SKIP 3 + +const char *resstr[] = { "PASS", "FAIL", "XFAIL", "SKIP" }; +static int _res_max = sizeof(resstr) / sizeof(resstr[0]); + +/* A single setopt testcase */ +struct optest +{ + char *group; /* Group this testcase belongs to */ + char *name; /* Testcase name */ + /* gdbm_setopt arguments: */ + int code; /* option code */ + void *valptr; /* points to the value */ + int valsize; /* size of the value */ + /* end of arguments */ + int xfail; /* if !0, expected value of gdbm_errno */ + int (*test) (void *valptr); /* Test function (can be NULL) */ + void (*init) (void *valptr, int valsize); /* Initialization function + (can be NULL) */ +}; + +/* Storage for the test value */ +char *string; +size_t size; +int intval; +int retbool; + +/* Individual test and initialization functions */ + +int +test_getflags (void *valptr) +{ + int expected = mode | flags; +#ifndef HAVE_MMAP + expected |= GDBM_NOMMAP; +#endif + return (*(int*) valptr == expected) ? RES_PASS : RES_FAIL; +} + +int +test_dbname (void *valptr) +{ + char *s = *(char**)valptr; + int rc = strcmp (string, dbname) == 0 ? RES_PASS : RES_FAIL; + if (rc != RES_PASS) + printf ("[got %s instead of %s] ", s, dbname); + free (s); + return rc; +} + +void +init_cachesize (void *valptr, int valsize) +{ + *(size_t*) valptr = cache_size; +} + +int +test_getcachesize (void *valptr) +{ + return *(size_t*) valptr == cache_size ? RES_PASS : RES_FAIL; +} + +void +init_true (void *valptr, int valsize) +{ + *(int*) valptr = 1; +} + +void +init_false (void *valptr, int valsize) +{ + *(int*) valptr = 0; +} + +void +init_negate_bool (void *valptr, int valsize) +{ + *(int*) valptr = !retbool; +} + +int +test_true (void *valptr) +{ + return *(int*) valptr == 1 ? RES_PASS : RES_FAIL; +} + +int +test_false (void *valptr) +{ + return *(int*) valptr == 0 ? RES_PASS : RES_FAIL; +} + +int +test_negate_bool (void *valptr) +{ + return *(int*) valptr == !retbool ? RES_PASS : RES_FAIL; +} + +int +test_bool (void *valptr) +{ + return *(int*) valptr == retbool ? RES_PASS : RES_FAIL; +} + +int +test_initial_maxmapsize(void *valptr) +{ + return *(size_t*) valptr == SIZE_T_MAX ? RES_PASS : RES_FAIL; +} + +void +init_maxmapsize (void *valptr, int valsize) +{ + *(size_t*)valptr = mapped_size_max; +} + +int +test_maxmapsize (void *valptr) +{ + size_t page_size = sysconf (_SC_PAGESIZE); + size_t expected_size = ((mapped_size_max + page_size - 1) / page_size) * + page_size; + return (*(size_t*) valptr == expected_size) ? RES_PASS : RES_FAIL; +} + +int +test_mmap_group (void *valptr) +{ +#ifdef HAVE_MMAP + return RES_PASS; +#else + return RES_SKIP; +#endif +} + +/* Create a group of testcases for testing a boolean option. + Arguments: + + grp - group name + set - GDBM_SETxxx option + get - GDBM_GETxxx option +*/ +#define TEST_BOOL_OPTION(grp, set,get) \ + { #grp, }, \ + { #grp, "initial " #get, get, &retbool, sizeof (retbool), \ + 0, NULL, NULL }, \ + { #grp, #set, set, &intval, sizeof (intval), \ + 0, NULL, init_negate_bool }, \ + { #grp, #get, get, &intval, sizeof (intval), \ + 0, test_negate_bool, NULL }, \ + { #grp, #set " true", set, &intval, sizeof (intval), \ + 0, NULL, init_true }, \ + { #grp, #get, get, &intval, sizeof (intval), \ + 0, test_true, NULL }, \ + { #grp, #set " false", set, &intval, sizeof (intval), \ + 0, NULL, init_false }, \ + { #grp, #get, get, &intval, sizeof (intval), \ + 0, test_false, NULL } + + +/* Table of testcases: */ +struct optest optest_tab[] = { + { "GETFLAGS", "GDBM_GETFLAGS", GDBM_GETFLAGS, &intval, sizeof (intval), + 0, test_getflags }, + + { "CACHESIZE" }, + { "CACHESIZE", "initial GDBM_SETCACHESIZE", GDBM_SETCACHESIZE, + &size, sizeof (size), 0, + NULL, init_cachesize }, + { "CACHESIZE", "GDBM_GETCACHESIZE", GDBM_GETCACHESIZE, + &size, sizeof (size), 0, + test_getcachesize }, + { "CACHESIZE", "second GDBM_SETCACHESIZE", GDBM_SETCACHESIZE, + &size, sizeof (size), + GDBM_OPT_ALREADY_SET, NULL, init_cachesize }, + + TEST_BOOL_OPTION (SYNCMODE, GDBM_SETSYNCMODE, GDBM_GETSYNCMODE), + TEST_BOOL_OPTION (CENTFREE, GDBM_SETCENTFREE, GDBM_GETCENTFREE), + TEST_BOOL_OPTION (COALESCEBLKS, GDBM_SETCOALESCEBLKS, GDBM_GETCOALESCEBLKS), + + /* MMAP group */ + { "MMAP", NULL, 0, NULL, 0, 0, test_mmap_group }, + + { "MMAP", "initial GDBM_GETMMAP", GDBM_GETMMAP, + &intval, sizeof (intval), 0, + test_true }, + { "MMAP", "GDBM_SETMMAP false", GDBM_SETMMAP, + &intval, sizeof (intval), 0, + NULL, init_false }, + { "MMAP", "GDBM_GETMMAP", GDBM_GETMMAP, + &intval, sizeof (intval), 0, + test_false }, + + { "MMAP", "initial GDBM_GETMAXMAPSIZE", GDBM_GETMAXMAPSIZE, + &size, sizeof (size), 0, + test_initial_maxmapsize, NULL }, + { "MMAP", "GDBM_SETMAXMAPSIZE", GDBM_SETMAXMAPSIZE, + &size, sizeof (size), 0, + NULL, init_maxmapsize }, + { "MMAP", "GDBM_GETMAXMAPSIZE", GDBM_GETMAXMAPSIZE, + &size, sizeof (size), 0, + test_maxmapsize, NULL }, + + + { "GETDBNAME", "GDBM_GETDBNAME", GDBM_GETDBNAME, + &string, sizeof (string), 0, + test_dbname, NULL }, + { NULL } +}; + +/* Use ARGV to determine whether to run the given GROUP of + testcases. + + ARGV is a NULL-terminated array of allowed group names. A "!" + prefix can be used to denote negation. */ +int +groupok (char **argv, const char *group) +{ + int retval = 1; + + if (*argv) + { + char *arg; + + while ((arg = *argv++)) + { + if (*arg == '!') + { + if (strcasecmp (arg + 1, group) == 0) + return 0; + retval = 1; + } + else + { + if (strcasecmp (arg, group) == 0) + return 1; + retval = 0; + } + } + } + + return retval; +} + +int +main (int argc, char **argv) +{ + GDBM_FILE dbf; + struct optest *op; + + progname = canonical_progname (argv[0]); + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-h") == 0) + { + printf ("usage: %s [-blocksize=N] [-nolock] [-sync] [-maxmap=N] DBFILE [GROUP [GROUP...]\n", + progname); + exit (0); + } + else if (strcmp (arg, "-nolock") == 0) + flags |= GDBM_NOLOCK; + else if (strcmp (arg, "-sync") == 0) + flags |= GDBM_SYNC; + else if (strncmp (arg, "-blocksize=", 11) == 0) + block_size = atoi (arg + 11); + else if (strncmp (arg, "-maxmap=", 8) == 0) + mapped_size_max = get_max_mmap_size (arg + 8); + else if (strcmp (arg, "--") == 0) + { + --argc; + ++argv; + break; + } + else if (arg[0] == '-') + { + fprintf (stderr, "%s: unknown option %s\n", progname, arg); + exit (1); + } + else + break; + } + + if (argc == 0) + { + fprintf (stderr, "%s: wrong arguments\n", progname); + exit (1); + } + dbname = *argv; + ++argv; + --argc; + + dbf = gdbm_open (dbname, block_size, mode|flags, 00664, NULL); + if (!dbf) + { + fprintf (stderr, "gdbm_open failed: %s\n", gdbm_strerror (gdbm_errno)); + exit (1); + } + + for (op = optest_tab; op->group; op++) + { + int rc; + + if (!groupok (argv, op->group)) + continue; + + if (!op->name) + { + /* Group header */ + const char *grp = op->group; + + printf ("* %s:", grp); + if (op->test && (rc = op->test (NULL)) != RES_PASS) + { + printf (" %s", resstr[rc]); + for (op++; op->name && strcmp (op->group, grp) == 0; op++) + ; + op--; + } + putchar ('\n'); + continue; + } + + printf ("%s: ", op->name); + if (op->init) + op->init (op->valptr, op->valsize); + + rc = gdbm_setopt (dbf, op->code, op->valptr, op->valsize); + if (rc) + { + if (gdbm_errno == op->xfail) + puts (resstr[RES_XFAIL]); + else + printf ("%s: %s\n", resstr[RES_FAIL], + gdbm_strerror (gdbm_errno)); + } + else if (!op->test) + puts (resstr[RES_PASS]); + else + { + rc = op->test (op->valptr); + assert (rc >= 0 && rc < _res_max); + puts (resstr[rc]); + } + } + + gdbm_close (dbf); + exit (0); +} + + + diff --git a/tests/gtver.c b/tests/gtver.c new file mode 100644 index 0000000..27fc0b9 --- /dev/null +++ b/tests/gtver.c @@ -0,0 +1,74 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include "gdbm.h" +#include "progname.h" + +#define major_number(lib) ((lib) ? gdbm_version_number[0] : GDBM_VERSION_MAJOR) +#define minor_number(lib) ((lib) ? gdbm_version_number[1] : GDBM_VERSION_MINOR) +#define patch_number(lib) ((lib) ? gdbm_version_number[2] : GDBM_VERSION_PATCH) + +int +main (int argc, char **argv) +{ + const char *progname = canonical_progname (argv[0]); + int library = 0; + + if (argc == 1) + { + printf ("%s\n", gdbm_version); + exit (0); + } + + while (--argc) + { + char *arg = *++argv; + + if (strcmp (arg, "-help") == 0) + { + printf ("usage: %s [-string] [-lib] [-header] [-major] [-minor] [-patch] [-full]\n", progname); + exit (0); + } + else if (strcmp (arg, "-string") == 0) + printf ("%s\n", gdbm_version); + else if (strcmp (arg, "-lib") == 0) + library = 1; + else if (strcmp (arg, "-header") == 0) + library = 0; + else if (strcmp (arg, "-major") == 0) + printf ("%d\n", major_number (library)); + else if (strcmp (arg, "-minor") == 0) + printf ("%d\n", minor_number (library)); + else if (strcmp (arg, "-patch") == 0) + printf ("%d\n", patch_number (library)); + else if (strcmp (arg, "-full") == 0) + printf ("%d.%d.%d\n", + major_number (library), + minor_number (library), + patch_number (library)); + else + { + fprintf (stderr, "%s: unknown option %s\n", + progname, arg); + exit (1); + } + } + exit (0); +} diff --git a/tests/num2word.c b/tests/num2word.c new file mode 100644 index 0000000..4b55a35 --- /dev/null +++ b/tests/num2word.c @@ -0,0 +1,255 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ +#include "autoconf.h" +#include +#include +#include +#include +#include + +const char *progname; + +const char *nstr[][10] = { + { "zero", + "one", + "two", + "three", + "four", + "five", + "six", + "seven", + "eight", + "nine" + }, + { "ten", + "eleven", + "twelve", + "thirteen", + "fourteen", + "fifteen", + "sixteen", + "seventeen", + "eighteen", + "nineteen" + }, + { NULL, + NULL, + "twenty", + "thirty", + "fourty", + "fifty", + "sixty", + "seventy", + "eighty", + "ninety" + } +}; + +const char *short_scale[] = { + "one", + "thousand", + "million", + "billion" + /* End of range for 32-bit unsigned long */ +}; +size_t short_scale_max = sizeof (short_scale) / sizeof (short_scale[0]); + +char buffer[1024]; +size_t bufsize = sizeof(buffer); +size_t bufoff; +int delim = 0; + +void +copy (const char *str, int dch) +{ + size_t len = strlen (str); + if (len + !!dch > bufoff) + abort (); + if (dch) + buffer[--bufoff] = dch; + bufoff -= len; + memcpy (buffer + bufoff, str, len); + delim = ' '; +} + +void +format_100 (unsigned long num) +{ + if (num == 0) + ; + else if (num < 10) + copy (nstr[0][num], delim); + else if (num < 20) + copy (nstr[1][num-10], delim); + else + { + unsigned long tens = num / 10; + num %= 10; + if (num) + { + copy (nstr[0][num], delim); + copy ("-", 0); + copy (nstr[2][tens], 0); + } + else + copy (nstr[2][tens], delim); + } +} + +void +format_1000 (unsigned long num, int more) +{ + size_t n = num % 100; + num /= 100; + format_100 (n); + more |= num != 0; + if (n && more) + copy ("and", delim); + if (num) + { + copy ("hundred", delim); + copy (nstr[0][num], delim); + } +} + + +void +format_number (unsigned long num) +{ + int s = 0; + size_t off; + + bufoff = bufsize; + buffer[--bufoff] = 0; + off = bufoff; + delim = 0; + + do + { + unsigned long n = num % 1000; + + num /= 1000; + + if (s > 0 && ((n && off > bufoff) || num == 0)) + copy (short_scale[s], delim); + s++; + + if (s > short_scale_max) + abort (); + + format_1000 (n, num != 0); + } + while (num); + + if (bufoff + 1 == bufsize) + copy (nstr[0][0], 0); +} + + +void +print_number (unsigned long num) +{ + format_number (num); + printf ("%lu\t%s\n", num, buffer + bufoff); +} + +void +print_range (unsigned long num, unsigned long to) +{ + for (; num <= to; num++) + print_number (num); +} + +unsigned long +xstrtoul (char *arg, char **endp) +{ + unsigned long num; + char *p; + + errno = 0; + num = strtoul (arg, &p, 10); + if (errno) + { + fprintf (stderr, "%s: invalid number: ", progname); + perror (arg); + exit (2); + } + if (endp) + *endp = p; + else if (*p) + { + fprintf (stderr, "%s: invalid number (near %s)\n", + progname, p); + exit (2); + } + + return num; +} + +int +main (int argc, char **argv) +{ + progname = argv[0]; + + if (argc == 1 || strcmp (argv[1], "-h") == 0) + { + printf ("usage: %s NUM [NUM...]\n", progname); + printf ("where NUM is a decimal number, NUM:COUNT or NUM-NUM\n"); + exit (0); + } + + while (--argc) + { + char *arg = *++argv; + unsigned long num, num2; + char *p; + + num = xstrtoul (arg, &p); + if (*p == 0) + print_number (num); + else if (*p == ':') + { + *p++ = 0; + num2 = xstrtoul (p, NULL); + if (num2 == 0) + { + fprintf (stderr, "%s: invalid count\n", progname); + exit (2); + } + print_range (num, num + num2 - 1); + } + else if (*p == '-') + { + *p++ = 0; + num2 = xstrtoul (p, NULL); + if (num2 < num) + { + fprintf (stderr, "%s: invalid range: %lu-%lu\n", + progname, num, num2); + exit (2); + } + + print_range (num, num2); + } + else + { + fprintf (stderr, "%s: invalid argument\n", progname); + exit (2); + } + } + exit (0); +} diff --git a/tests/package.m4 b/tests/package.m4 new file mode 100644 index 0000000..9f9ffcc --- /dev/null +++ b/tests/package.m4 @@ -0,0 +1,9 @@ +# Signature of the current package. +m4_define([AT_PACKAGE_NAME], [gdbm]) +m4_define([AT_PACKAGE_TARNAME], [gdbm]) +m4_define([AT_PACKAGE_VERSION], [1.10]) +m4_define([AT_PACKAGE_VERSION_MAJOR], [1]) +m4_define([AT_PACKAGE_VERSION_MINOR], [10]) +m4_define([AT_PACKAGE_VERSION_PATCH], [0]) +m4_define([AT_PACKAGE_STRING], [gdbm 1.10]) +m4_define([AT_PACKAGE_BUGREPORT], [bug-gdbm@gnu.org]) diff --git a/tests/progname.h b/tests/progname.h new file mode 100644 index 0000000..47dea1e --- /dev/null +++ b/tests/progname.h @@ -0,0 +1,32 @@ +/* This file is part of GDBM test suite. + Copyright (C) 2011 Free Software Foundation, Inc. + + GDBM is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GDBM is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GDBM. If not, see . +*/ + +const char * +canonical_progname (const char *str) +{ + const char *p; + + p = strrchr (str, '/'); + if (p) + p++; + else + p = str; + if (strncmp (p, "lt-", 3) == 0) + p += 3; + return p; +} + diff --git a/tests/setopt00.at b/tests/setopt00.at new file mode 100644 index 0000000..6fe3f41 --- /dev/null +++ b/tests/setopt00.at @@ -0,0 +1,61 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([setopt]) +AT_KEYWORDS([setopt setopt00]) + +AT_CHECK([ +num2word 1:1000 | gtload test.db || exit 2 +gtopt test.db '!MMAP' +], +[0], +[GDBM_GETFLAGS: PASS +* CACHESIZE: +initial GDBM_SETCACHESIZE: PASS +GDBM_GETCACHESIZE: PASS +second GDBM_SETCACHESIZE: XFAIL +* SYNCMODE: +initial GDBM_GETSYNCMODE: PASS +GDBM_SETSYNCMODE: PASS +GDBM_GETSYNCMODE: PASS +GDBM_SETSYNCMODE true: PASS +GDBM_GETSYNCMODE: PASS +GDBM_SETSYNCMODE false: PASS +GDBM_GETSYNCMODE: PASS +* CENTFREE: +initial GDBM_GETCENTFREE: PASS +GDBM_SETCENTFREE: PASS +GDBM_GETCENTFREE: FAIL +GDBM_SETCENTFREE true: PASS +GDBM_GETCENTFREE: FAIL +GDBM_SETCENTFREE false: PASS +GDBM_GETCENTFREE: FAIL +* COALESCEBLKS: +initial GDBM_GETCOALESCEBLKS: PASS +GDBM_SETCOALESCEBLKS: PASS +GDBM_GETCOALESCEBLKS: PASS +GDBM_SETCOALESCEBLKS true: PASS +GDBM_GETCOALESCEBLKS: PASS +GDBM_SETCOALESCEBLKS false: PASS +GDBM_GETCOALESCEBLKS: PASS +GDBM_GETDBNAME: PASS +]) + +AT_CLEANUP + + + + diff --git a/tests/setopt01.at b/tests/setopt01.at new file mode 100644 index 0000000..fbe9c71 --- /dev/null +++ b/tests/setopt01.at @@ -0,0 +1,37 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([setopt: mmap options]) +AT_KEYWORDS([setopt setopt01 mmap]) + +AT_CHECK([ +num2word 1:1000 | gtload test.db || exit 2 +gtopt test.db 'MMAP' > out +grep 'MMAP: SKIP' out >/dev/null && AT_SKIP_TEST +cat out +], +[0], +[* MMAP: +initial GDBM_GETMMAP: PASS +GDBM_SETMMAP false: PASS +GDBM_GETMMAP: PASS +initial GDBM_GETMAXMAPSIZE: PASS +GDBM_SETMAXMAPSIZE: PASS +GDBM_GETMAXMAPSIZE: PASS +]) + +AT_CLEANUP + diff --git a/tests/testsuite b/tests/testsuite new file mode 100755 index 0000000..96ee5f9 --- /dev/null +++ b/tests/testsuite @@ -0,0 +1,3234 @@ +#! /bin/sh +# Generated from testsuite.at by GNU Autoconf 2.63. +# +# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 +# Free Software Foundation, Inc. +# This test suite is free software; the Free Software Foundation gives +# unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell bug-autoconf@gnu.org about your system, + echo including any error possibly output before this message. + echo This can help us improve future autoconf versions. + echo Configuration will now proceed without shell functions. +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { { $as_echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +$as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + + + +SHELL=${CONFIG_SHELL-/bin/sh} + +# How were we run? +at_cli_args="$@" + + +# Not all shells have the 'times' builtin; the subshell is needed to make +# sure we discard the 'times: not found' message from the shell. +at_times_p=false +(times) >/dev/null 2>&1 && at_times_p=: + +# CLI Arguments to pass to the debugging scripts. +at_debug_args= +# -e sets to true +at_errexit_p=false +# Shall we be verbose? ':' means no, empty means yes. +at_verbose=: +at_quiet= + +# Shall we keep the debug scripts? Must be `:' when the suite is +# run by a debug script, so that the script doesn't remove itself. +at_debug_p=false +# Display help message? +at_help_p=false +# Display the version message? +at_version_p=false +# List test groups? +at_list_p=false +# --clean +at_clean=false +# Test groups to run +at_groups= +# Whether a write failure occurred +at_write_fail=0 + +# The directory we run the suite in. Default to . if no -C option. +at_dir=`pwd` +# An absolute reference to this testsuite script. +case $as_myself in + [\\/]* | ?:[\\/]* ) at_myself=$as_myself ;; + * ) at_myself=$at_dir/$as_myself ;; +esac +# Whether -C is in effect. +at_change_dir=false + +# List of the tested programs. +at_tested='' +# List of the all the test groups. +at_groups_all=' 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22' +# As many question marks as there are digits in the last test group number. +# Used to normalize the test group numbers so that `ls' lists them in +# numerical order. +at_format='??' +# Description of all the test groups. +at_help_all="1;version.at:17;gdbm version;; +2;create00.at:17;create database;gdbm create create00; +3;fetch00.at:17;fetch a record;gdbm fetch fetch00; +4;fetch01.at:17;fetch: nonexisting record;gdbm fetch fetch01; +5;delete00.at:17;delete a record;gdbm delete delete00; +6;delete01.at:17;delete: non existing record;gdbm delete delete01; +7;delete02.at:17;delete: all records;gdbm delete delete02; +8;dbmcreate00.at:17;create database;dbm create create00 dbmcreate00; +9;dbmcvt.at:17;converting a 1.8-style database;dbm fetch cvt; +10;dbmfetch00.at:17;fetch a record;dbm fetch fetch00 dbmfetch00; +11;dbmfetch01.at:17;fetch: nonexisting record;dbm fetch fetch01 dbmfetch01; +12;dbmfetch02.at:17;fetch from a read-only database;dbm fetch fetch02 dbmfetch02; +13;dbmfetch03.at:17;fetch from a read-only 1.8-style database;dbm fetch fetch03 dbmfetch03; +14;dbmdel00.at:17;delete a record;dbm delete delete00 dbmdel00; +15;dbmdel01.at:17;delete: non existing record;dbm delete delete01 dbmdel01; +16;dbmdel02.at:17;delete: all records;dbm delete delete02 dbmdel02; +17;setopt00.at:17;setopt;setopt setopt00; +18;setopt01.at:17;setopt: mmap options;setopt setopt01 mmap; +19;cloexec00.at:17;cloexec: gdbm_open;gdbm gdbm_open cloexec cloexec00; +20;cloexec01.at:17;cloexec: gdbm_reorganize;gdbm gdbm_reorganize cloexec cloexec01; +21;cloexec02.at:17;cloexec: dbm_open;ndbm dbm_open cloexec cloexec02; +22;cloexec03.at:17;cloexec: dbm_open -creat;ndbm dbm_open cloexec cloexec03; +" + +# at_func_validate_ranges [NAME...] +# --------------------------------- +# Validate and normalize the test group number contained in each +# variable NAME. Leading zeroes are treated as decimal. +at_func_validate_ranges () +{ + for at_grp + do + eval at_value=\$$at_grp + if test $at_value -lt 1 || test $at_value -gt 22; then + $as_echo "invalid test group: $at_value" >&2 + exit 1 + fi + case $at_value in + 0*) # We want to treat leading 0 as decimal, like expr and test, but + # at_func_arith treats it as octal if it uses $(( )). + # With XSI shells, ${at_value#${at_value%%[1-9]*}} avoids the + # expr fork, but it is not worth the effort to determine if the + # shell supports XSI when the user can just avoid leading 0. + eval $at_grp='`expr $at_value + 0`' ;; + esac + done +} + +at_prev= +for at_option +do + # If the previous option needs an argument, assign it. + if test -n "$at_prev"; then + at_option=$at_prev=$at_option + at_prev= + fi + + case $at_option in + *=*) at_optarg=`expr "x$at_option" : 'x[^=]*=\(.*\)'` ;; + *) at_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $at_option in + --help | -h ) + at_help_p=: + ;; + + --list | -l ) + at_list_p=: + ;; + + --version | -V ) + at_version_p=: + ;; + + --clean | -c ) + at_clean=: + ;; + + --debug | -d ) + at_debug_p=: + ;; + + --errexit | -e ) + at_debug_p=: + at_errexit_p=: + ;; + + --verbose | -v ) + at_verbose=; at_quiet=: + ;; + + --trace | -x ) + at_traceon='set -x'; at_traceoff='set +x' + ;; + + [0-9] | [0-9][0-9] | [0-9][0-9][0-9] | [0-9][0-9][0-9][0-9]) + at_func_validate_ranges at_option + at_groups="$at_groups$at_option " + ;; + + # Ranges + [0-9]- | [0-9][0-9]- | [0-9][0-9][0-9]- | [0-9][0-9][0-9][0-9]-) + at_range_start=`echo $at_option |tr -d X-` + at_func_validate_ranges at_range_start + at_range=`$as_echo " $at_groups_all " | \ + sed -e 's/^.* \('$at_range_start' \)/\1/'` + at_groups="$at_groups$at_range " + ;; + + -[0-9] | -[0-9][0-9] | -[0-9][0-9][0-9] | -[0-9][0-9][0-9][0-9]) + at_range_end=`echo $at_option |tr -d X-` + at_func_validate_ranges at_range_end + at_range=`$as_echo " $at_groups_all " | \ + sed -e 's/\( '$at_range_end'\) .*$/\1/'` + at_groups="$at_groups$at_range " + ;; + + [0-9]-[0-9] | [0-9]-[0-9][0-9] | [0-9]-[0-9][0-9][0-9] | \ + [0-9]-[0-9][0-9][0-9][0-9] | [0-9][0-9]-[0-9][0-9] | \ + [0-9][0-9]-[0-9][0-9][0-9] | [0-9][0-9]-[0-9][0-9][0-9][0-9] | \ + [0-9][0-9][0-9]-[0-9][0-9][0-9] | \ + [0-9][0-9][0-9]-[0-9][0-9][0-9][0-9] | \ + [0-9][0-9][0-9][0-9]-[0-9][0-9][0-9][0-9] ) + at_range_start=`expr $at_option : '\(.*\)-'` + at_range_end=`expr $at_option : '.*-\(.*\)'` + if test $at_range_start -gt $at_range_end; then + at_tmp=$at_range_end + at_range_end=$at_range_start + at_range_start=$at_tmp + fi + at_func_validate_ranges at_range_start at_range_end + at_range=`$as_echo " $at_groups_all " | \ + sed -e 's/^.*\( '$at_range_start' \)/\1/' \ + -e 's/\( '$at_range_end'\) .*$/\1/'` + at_groups="$at_groups$at_range " + ;; + + # Directory selection. + --directory | -C ) + at_prev=--directory + ;; + --directory=* ) + at_change_dir=: + at_dir=$at_optarg + ;; + + # Keywords. + --keywords | -k ) + at_prev=--keywords + ;; + --keywords=* ) + at_groups_selected=$at_help_all + at_save_IFS=$IFS + IFS=, + set X $at_optarg + shift + IFS=$at_save_IFS + for at_keyword + do + at_invert= + case $at_keyword in + '!'*) + at_invert="-v" + at_keyword=`expr "X$at_keyword" : 'X!\(.*\)'` + ;; + esac + # It is on purpose that we match the test group titles too. + at_groups_selected=`$as_echo "$at_groups_selected" | + grep -i $at_invert "^[1-9][^;]*;.*[; ]$at_keyword[ ;]"` + done + # Smash the newlines. + at_groups_selected=`$as_echo "$at_groups_selected" | sed 's/;.*//' | + tr "$as_nl" ' ' + ` + at_groups="$at_groups$at_groups_selected " + ;; + + *=*) + at_envvar=`expr "x$at_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $at_envvar in + '' | [0-9]* | *[!_$as_cr_alnum]* ) + { { $as_echo "$as_me:$LINENO: error: invalid variable name: $at_envvar" >&5 +$as_echo "$as_me: error: invalid variable name: $at_envvar" >&2;} + { (exit 1); exit 1; }; } ;; + esac + at_value=`$as_echo "$at_optarg" | sed "s/'/'\\\\\\\\''/g"` + # Export now, but save eval for later and for debug scripts. + export $at_envvar + at_debug_args="$at_debug_args $at_envvar='$at_value'" + ;; + + *) $as_echo "$as_me: invalid option: $at_option" >&2 + $as_echo "Try \`$0 --help' for more information." >&2 + exit 1 + ;; + esac +done + +# Verify our last option didn't require an argument +if test -n "$at_prev"; then + { { $as_echo "$as_me:$LINENO: error: \`$at_prev' requires an argument." >&5 +$as_echo "$as_me: error: \`$at_prev' requires an argument." >&2;} + { (exit 1); exit 1; }; } +fi + + +# Selected test groups. +if test -z "$at_groups"; then + at_groups=$at_groups_all +else + # Sort the tests, removing duplicates. + at_groups=`$as_echo "$at_groups" | tr ' ' "$as_nl" | sort -nu` +fi + +# Help message. +if $at_help_p; then + cat <<_ATEOF || at_write_fail=1 +Usage: $0 [OPTION]... [VARIABLE=VALUE]... [TESTS] + +Run all the tests, or the selected TESTS, given by numeric ranges, and +save a detailed log file. Upon failure, create debugging scripts. + +You should not change environment variables unless explicitly passed +as command line arguments. Set \`AUTOTEST_PATH' to select the executables +to exercise. Each relative directory is expanded as build and source +directories relatively to the top level of this distribution. E.g., + + $ $0 AUTOTEST_PATH=bin + +possibly amounts into + + PATH=/tmp/foo-1.0/bin:/src/foo-1.0/bin:\$PATH +_ATEOF +cat <<_ATEOF || at_write_fail=1 + +Operation modes: + -h, --help print the help message, then exit + -V, --version print version number, then exit + -c, --clean remove all the files this test suite might create and exit + -l, --list describes all the tests, or the selected TESTS +_ATEOF +cat <<_ATEOF || at_write_fail=1 + +Execution tuning: + -C, --directory=DIR + change to directory DIR before starting + -k, --keywords=KEYWORDS + select the tests matching all the comma-separated KEYWORDS + multiple \`-k' accumulate; prefixed \`!' negates a KEYWORD + -e, --errexit abort as soon as a test fails; implies --debug + -v, --verbose force more detailed output + default for debugging scripts + -d, --debug inhibit clean up and top-level logging + default for debugging scripts + -x, --trace enable tests shell tracing +_ATEOF +cat <<_ATEOF || at_write_fail=1 + +Report bugs to . +_ATEOF + exit $at_write_fail +fi + +# List of tests. +if $at_list_p; then + cat <<_ATEOF || at_write_fail=1 +gdbm 1.10 test suite test groups: + + NUM: FILE-NAME:LINE TEST-GROUP-NAME + KEYWORDS + +_ATEOF + # Passing at_groups is tricky. We cannot use it to form a literal string + # or regexp because of the limitation of AIX awk. And Solaris' awk + # doesn't grok more than 99 fields in a record, so we have to use `split'. + # at_groups needs to be space-separated for this script to work. + case $at_groups in + *"$as_nl"* ) + at_groups=`$as_echo "$at_groups" | tr "$as_nl" ' '` ;; + esac + $as_echo "$at_groups$as_nl$at_help_all" | + awk 'BEGIN { FS = ";" } + NR == 1 { + for (n = split($ 0, a, " "); n; n--) selected[a[n]] = 1 + next + } + { + if (selected[$ 1]) { + printf " %3d: %-18s %s\n", $ 1, $ 2, $ 3 + if ($ 4) printf " %s\n", $ 4 + } + }' || at_write_fail=1 + exit $at_write_fail +fi +if $at_version_p; then + $as_echo "$as_me (gdbm 1.10)" && + cat <<\_ACEOF || at_write_fail=1 + +Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 +Free Software Foundation, Inc. +This test suite is free software; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. +_ACEOF + exit $at_write_fail +fi + +# Should we print banners? at_groups is space-separated for entire test, +# newline-separated if only a subset of the testsuite is run. +case $at_groups in + *' '*' '* | *"$as_nl"*"$as_nl"* ) + at_print_banners=: ;; + * ) at_print_banners=false ;; +esac +# Text for banner N, set to empty once printed. +# Banner 1. testsuite.at:35 +# Category starts at test group 2. +at_banner_text_1="GDBM interface" +# Banner 2. testsuite.at:46 +# Category starts at test group 8. +at_banner_text_2="Compatibility library (dbm/ndbm)" +# Banner 3. testsuite.at:61 +# Category starts at test group 17. +at_banner_text_3="DB options" +# Banner 4. testsuite.at:66 +# Category starts at test group 19. +at_banner_text_4="Cloexec" + +# Take any -C into account. +if $at_change_dir ; then + if test x- = "x$at_dir" ; then + at_dir=./- + fi + test x != "x$at_dir" && cd "$at_dir" \ + || { { $as_echo "$as_me:$LINENO: error: unable to change directory" >&5 +$as_echo "$as_me: error: unable to change directory" >&2;} + { (exit 1); exit 1; }; } + at_dir=`pwd` +fi + +# Load the config files for any default variable assignments. +for at_file in atconfig atlocal +do + test -r $at_file || continue + . ./$at_file || { { $as_echo "$as_me:$LINENO: error: invalid content: $at_file" >&5 +$as_echo "$as_me: error: invalid content: $at_file" >&2;} + { (exit 1); exit 1; }; } +done + +# Autoconf <=2.59b set at_top_builddir instead of at_top_build_prefix: +: ${at_top_build_prefix=$at_top_builddir} + +# Perform any assignments requested during argument parsing. +eval "$at_debug_args" + +# atconfig delivers names relative to the directory the test suite is +# in, but the groups themselves are run in testsuite-dir/group-dir. +if test -n "$at_top_srcdir"; then + builddir=../.. + for at_dir_var in srcdir top_srcdir top_build_prefix + do + at_val=`eval 'as_val=${'at_$at_dir_var'} + $as_echo "$as_val"'` + case $at_val in + [\\/$]* | ?:[\\/]* ) at_prefix= ;; + *) at_prefix=../../ ;; + esac + eval "$at_dir_var=\$at_prefix\$at_val" + done +fi + +## ------------------- ## +## Directory structure ## +## ------------------- ## + +# This is the set of directories and files used by this script +# (non-literals are capitalized): +# +# TESTSUITE - the testsuite +# TESTSUITE.log - summarizes the complete testsuite run +# TESTSUITE.dir/ - created during a run, remains after -d or failed test +# + at-groups/ - during a run: status of all groups in run +# | + NNN/ - during a run: meta-data about test group NNN +# | | + check-line - location (source file and line) of current AT_CHECK +# | | + status - exit status of current AT_CHECK +# | | + stdout - stdout of current AT_CHECK +# | | + stder1 - stderr, including trace +# | | + stderr - stderr, with trace filtered out +# | | + test-source - portion of testsuite that defines group +# | | + times - timestamps for computing duration +# | | + pass - created if group passed +# | | + xpass - created if group xpassed +# | | + fail - created if group failed +# | | + xfail - created if group xfailed +# | | + skip - created if group skipped +# + at-stop - during a run: end the run if this file exists +# + at-source-lines - during a run: cache of TESTSUITE line numbers for extraction +# + 0..NNN/ - created for each group NNN, remains after -d or failed test +# | + TESTSUITE.log - summarizes the group results +# | + ... - files created during the group + +# The directory the whole suite works in. +# Should be absolute to let the user `cd' at will. +at_suite_dir=$at_dir/$as_me.dir +# The file containing the suite. +at_suite_log=$at_dir/$as_me.log +# The directory containing helper files per test group. +at_helper_dir=$at_suite_dir/at-groups +# Stop file: if it exists, do not start new jobs. +at_stop_file=$at_suite_dir/at-stop + +if $at_clean; then + test -d "$at_suite_dir" && + find "$at_suite_dir" -type d ! -perm -700 -exec chmod u+rwx \{\} \; + rm -f -r "$at_suite_dir" "$at_suite_log" + exit $? +fi + +# Don't take risks: use only absolute directories in PATH. +# +# For stand-alone test suites (ie. atconfig was not found), +# AUTOTEST_PATH is relative to `.'. +# +# For embedded test suites, AUTOTEST_PATH is relative to the top level +# of the package. Then expand it into build/src parts, since users +# may create executables in both places. +AUTOTEST_PATH=`$as_echo "$AUTOTEST_PATH" | sed "s|:|$PATH_SEPARATOR|g"` +at_path= +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $AUTOTEST_PATH $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -n "$at_path" && at_path=$at_path$PATH_SEPARATOR +case $as_dir in + [\\/]* | ?:[\\/]* ) + at_path=$at_path$as_dir + ;; + * ) + if test -z "$at_top_build_prefix"; then + # Stand-alone test suite. + at_path=$at_path$as_dir + else + # Embedded test suite. + at_path=$at_path$at_top_build_prefix$as_dir$PATH_SEPARATOR + at_path=$at_path$at_top_srcdir/$as_dir + fi + ;; +esac +done +IFS=$as_save_IFS + + +# Now build and simplify PATH. +# +# There might be directories that don't exist, but don't redirect +# builtins' (eg., cd) stderr directly: Ultrix's sh hates that. +at_new_path= +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $at_path +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -d "$as_dir" || continue +case $as_dir in + [\\/]* | ?:[\\/]* ) ;; + * ) as_dir=`(cd "$as_dir" && pwd) 2>/dev/null` ;; +esac +case $PATH_SEPARATOR$at_new_path$PATH_SEPARATOR in + *$PATH_SEPARATOR$as_dir$PATH_SEPARATOR*) ;; + $PATH_SEPARATOR$PATH_SEPARATOR) at_new_path=$as_dir ;; + *) at_new_path=$at_new_path$PATH_SEPARATOR$as_dir ;; +esac +done +IFS=$as_save_IFS + +PATH=$at_new_path +export PATH + +# Setting up the FDs. +# 5 is the log file. Not to be overwritten if `-d'. +if $at_debug_p; then + at_suite_log=/dev/null +else + : >"$at_suite_log" +fi +exec 5>>"$at_suite_log" + +# Banners and logs. +cat <<\_ASBOX +## --------------------- ## +## gdbm 1.10 test suite. ## +## --------------------- ## +_ASBOX +{ + cat <<\_ASBOX +## --------------------- ## +## gdbm 1.10 test suite. ## +## --------------------- ## +_ASBOX + echo + + $as_echo "$as_me: command line was:" + $as_echo " \$ $0 $at_cli_args" + echo + + # Try to find a few ChangeLogs in case it might help determining the + # exact version. Use the relative dir: if the top dir is a symlink, + # find will not follow it (and options to follow the links are not + # portable), which would result in no output here. Prune directories + # matching the package tarname, since they tend to be leftovers from + # `make dist' or `make distcheck' and contain redundant or stale logs. + if test -n "$at_top_srcdir"; then + cat <<\_ASBOX +## ----------- ## +## ChangeLogs. ## +## ----------- ## +_ASBOX + echo + for at_file in `find "$at_top_srcdir" -name "gdbm-*" -prune -o -name ChangeLog -print` + do + $as_echo "$as_me: $at_file:" + sed 's/^/| /;10q' $at_file + echo + done + + fi + + { +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" +done +IFS=$as_save_IFS + +} + echo + + # Contents of the config files. + for at_file in atconfig atlocal + do + test -r $at_file || continue + $as_echo "$as_me: $at_file:" + sed 's/^/| /' $at_file + echo + done +} >&5 + + +## --------------- ## +## Shell functions ## +## --------------- ## + +# at_func_banner NUMBER +# --------------------- +# Output banner NUMBER, provided the testsuite is running multiple groups +# and this particular banner has not yet been printed. +at_func_banner () +{ + $at_print_banners || return 0 + eval at_banner_text=\$at_banner_text_$1 + test "x$at_banner_text" = x && return 0 + eval at_banner_text_$1= + $as_echo "$as_nl$at_banner_text$as_nl" +} # at_func_banner + +# at_func_check_newline COMMAND +# ----------------------------- +# Test if COMMAND includes a newline and, if so, print a message and return +# exit code 1 +at_func_check_newline () +{ + case "$1" in + *' +'*) echo 'Not enabling shell tracing (command contains an embedded newline)' + return 1 ;; + *) return 0 ;; + esac +} + +# at_func_filter_trace EXIT-CODE +# ------------------------------ +# Split the contents of file "$at_stder1" into the "set -x" trace (on stderr) +# and the other lines (on file "$at_stderr"). Return the exit code EXIT-CODE. +at_func_filter_trace () +{ + grep '^ *+' "$at_stder1" >&2 + grep -v '^ *+' "$at_stder1" >"$at_stderr" + return $1 +} + +# at_func_log_failure FILE-LIST +# ----------------------------- +# Copy the files in the list on stdout with a "> " prefix, and exit the shell +# with a failure exit code. +at_func_log_failure () +{ + for file + do $as_echo "$file:"; sed 's/^/> /' "$file"; done + echo 1 > "$at_status_file" + exit 1 +} + +# at_func_check_skip EXIT-CODE +# ---------------------------- +# Check whether EXIT-CODE is the special exit code 77, and if so exit the shell +# with that same exit code. +at_func_check_skip () +{ + case $1 in + 77) echo 77 > "$at_status_file"; exit 77;; + esac +} + +# at_func_check_status EXPECTED EXIT-CODE LINE +# -------------------------------------------- +# Check whether EXIT-CODE is the expected exit code, and if so do nothing. +# Otherwise, if it is 77 exit the shell with that same exit code; if it is +# anything else print an error message and fail the test. +at_func_check_status () +{ + case $2 in + $1 ) ;; + 77) echo 77 > "$at_status_file"; exit 77;; + *) $as_echo "$3: exit code was $2, expected $1" + at_failed=:;; + esac +} + +# at_func_diff_devnull FILE +# ------------------------- +# Emit a diff between /dev/null and FILE. Uses "test -s" to avoid useless +# diff invocations. +at_func_diff_devnull () +{ + test -s "$1" || return 0 + $at_diff "$at_devnull" "$1" +} + +# at_func_test NUMBER +# ------------------- +# Parse out test NUMBER from the tail of this file. +at_func_test () +{ + eval at_sed=\$at_sed$1 + sed "$at_sed" "$at_myself" > "$at_test_source" +} + +# at_func_create_debugging_script +# ------------------------------- +# Create the debugging script $at_group_dir/run which will reproduce the +# current test group. +at_func_create_debugging_script () +{ + { + echo "#! /bin/sh" && + echo 'test "${ZSH_VERSION+set}" = set && alias -g '\''${1+"$@"}'\''='\''"$@"'\''' && + $as_echo "cd '$at_dir'" && + $as_echo "exec \${CONFIG_SHELL-$SHELL} \"$at_myself\" -v -d $at_debug_args $at_group \${1+\"\$@\"}" && + echo 'exit 1' + } >"$at_group_dir/run" && + chmod +x "$at_group_dir/run" +} + +# at_func_arith +# ------------- +# Arithmetic evaluation, avoids expr if the shell is sane. The +# interpretation of leading zeroes is unspecified. +# +# subshell and eval are needed to keep Solaris sh from bailing out: +if ( eval 'test $(( 1 + 1 )) = 2' ) 2>/dev/null; then + # With "$@", bash does not split positional parameters: + eval 'at_func_arith () + { + at_func_arith_result=$(( $* )) + }' +else + at_func_arith () + { + at_func_arith_result=`expr "$@"` + } +fi + +## ---------------------- ## +## End of shell functions ## +## ---------------------- ## +{ + cat <<\_ASBOX +## ---------------- ## +## Tested programs. ## +## ---------------- ## +_ASBOX + echo +} >&5 + +# Report what programs are being tested. +for at_program in : $at_tested +do + test "$at_program" = : && continue + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -f "$as_dir/$at_program" && break +done +IFS=$as_save_IFS + + if test -f "$as_dir/$at_program"; then + { + $as_echo "$at_srcdir/testsuite.at:32: $as_dir/$at_program --version" + "$as_dir/$at_program" --version &5 2>&1 + else + { { $as_echo "$as_me:$LINENO: error: cannot find $at_program" >&5 +$as_echo "$as_me: error: cannot find $at_program" >&2;} + { (exit 1); exit 1; }; } + fi +done + +{ + cat <<\_ASBOX +## ------------------ ## +## Running the tests. ## +## ------------------ ## +_ASBOX +} >&5 + +at_start_date=`date` +at_start_time=`date +%s 2>/dev/null` +$as_echo "$as_me: starting at: $at_start_date" >&5 + +# Create the master directory if it doesn't already exist. +test -d "$at_suite_dir" || + mkdir "$at_suite_dir" || + { { $as_echo "$as_me:$LINENO: error: cannot create '$at_suite_dir'" >&5 +$as_echo "$as_me: error: cannot create '$at_suite_dir'" >&2;} + { (exit 1); exit 1; }; } + +# Can we diff with `/dev/null'? DU 5.0 refuses. +if diff /dev/null /dev/null >/dev/null 2>&1; then + at_devnull=/dev/null +else + at_devnull=$at_suite_dir/devnull + >"$at_devnull" +fi + +# Use `diff -u' when possible. +if at_diff=`diff -u "$at_devnull" "$at_devnull" 2>&1` && test -z "$at_diff" +then + at_diff='diff -u' +else + at_diff=diff +fi + +# Get the last needed group. +for at_group in : $at_groups; do :; done + +# Extract the start and end lines of each test group at the tail +# of this file +awk ' +BEGIN { FS="" } +/^#AT_START_/ { + start = NR +} +/^#AT_STOP_/ { + test = substr ($ 0, 10) + print "at_sed" test "=\"1," start "d;" (NR-1) "q\"" + if (test == "'"$at_group"'") exit +}' "$at_myself" > "$at_suite_dir/at-source-lines" && +. "$at_suite_dir/at-source-lines" || + { { $as_echo "$as_me:$LINENO: error: cannot create test line number cache" >&5 +$as_echo "$as_me: error: cannot create test line number cache" >&2;} + { (exit 1); exit 1; }; } +rm -f "$at_suite_dir/at-source-lines" + +# Set up helper dirs. +rm -rf "$at_helper_dir" && +mkdir "$at_helper_dir" && +cd "$at_helper_dir" && +{ test -z "$at_groups" || mkdir $at_groups; } || +{ { $as_echo "$as_me:$LINENO: error: testsuite directory setup failed" >&5 +$as_echo "$as_me: error: testsuite directory setup failed" >&2;} + { (exit 1); exit 1; }; } + +# Functions for running a test group. We leave the actual +# test group execution outside of a shell function in order +# to avoid hitting zsh 4.x exit status bugs. + +# at_func_group_prepare +# --------------------- +# Prepare running a test group +at_func_group_prepare () +{ + # The directory for additional per-group helper files. + at_job_dir=$at_helper_dir/$at_group + # The file containing the location of the last AT_CHECK. + at_check_line_file=$at_job_dir/check-line + # The file containing the exit status of the last command. + at_status_file=$at_job_dir/status + # The files containing the output of the tested commands. + at_stdout=$at_job_dir/stdout + at_stder1=$at_job_dir/stder1 + at_stderr=$at_job_dir/stderr + # The file containing the code for a test group. + at_test_source=$at_job_dir/test-source + # The file containing dates. + at_times_file=$at_job_dir/times + + # Be sure to come back to the top test directory. + cd "$at_suite_dir" + + # Clearly separate the test groups when verbose. + $at_first || $at_verbose echo + + at_group_normalized=$at_group + + eval 'while :; do + case $at_group_normalized in #( + '"$at_format"'*) break;; + esac + at_group_normalized=0$at_group_normalized + done' + + + # Create a fresh directory for the next test group, and enter. + at_group_dir=$at_suite_dir/$at_group_normalized + at_group_log=$at_group_dir/$as_me.log + if test -d "$at_group_dir"; then + find "$at_group_dir" -type d ! -perm -700 -exec chmod u+rwx \{\} \; + rm -fr "$at_group_dir" || + { $as_echo "$as_me:$LINENO: WARNING: test directory for $at_group_normalized could not be cleaned." >&5 +$as_echo "$as_me: WARNING: test directory for $at_group_normalized could not be cleaned." >&2;} + fi + # Be tolerant if the above `rm' was not able to remove the directory. + { as_dir="$at_group_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + + echo 0 > "$at_status_file" + + # In verbose mode, append to the log file *and* show on + # the standard output; in quiet mode only write to the log. + if test -z "$at_verbose"; then + at_tee_pipe='tee -a "$at_group_log"' + else + at_tee_pipe='cat >> "$at_group_log"' + fi +} + +# at_func_group_postprocess +# ------------------------- +at_func_group_postprocess () +{ + # Be sure to come back to the suite directory, in particular + # since below we might `rm' the group directory we are in currently. + cd "$at_suite_dir" + + if test ! -f "$at_check_line_file"; then + sed "s/^ */$as_me: WARNING: /" <<_ATEOF + A failure happened in a test group before any test could be + run. This means that test suite is improperly designed. Please + report this failure to . +_ATEOF + $as_echo "$at_setup_line" >"$at_check_line_file" + fi + $at_verbose $as_echo_n "$at_group. $at_setup_line: " + $as_echo_n "$at_group. $at_setup_line: " >> "$at_group_log" + case $at_xfail:$at_status in + yes:0) + at_msg="UNEXPECTED PASS" + at_res=xpass + at_errexit=$at_errexit_p + ;; + no:0) + at_msg="ok" + at_res=pass + at_errexit=false + ;; + *:77) + at_msg='skipped ('`cat "$at_check_line_file"`')' + at_res=skip + at_errexit=false + ;; + yes:*) + at_msg='expected failure ('`cat "$at_check_line_file"`')' + at_res=xfail + at_errexit=false + ;; + no:*) + at_msg='FAILED ('`cat "$at_check_line_file"`')' + at_res=fail + at_errexit=$at_errexit_p + ;; + esac + echo "$at_res" > "$at_job_dir/$at_res" + # Make sure there is a separator even with long titles. + $as_echo " $at_msg" + at_log_msg="$at_group. $at_desc ($at_setup_line): $at_msg" + case $at_status in + 0|77) + # $at_times_file is only available if the group succeeded. + # We're not including the group log, so the success message + # is written in the global log separately. But we also + # write to the group log in case they're using -d. + if test -f "$at_times_file"; then + at_log_msg="$at_log_msg ("`sed 1d "$at_times_file"`')' + rm -f "$at_times_file" + fi + $as_echo "$at_log_msg" >> "$at_group_log" + $as_echo "$at_log_msg" >&5 + + # Cleanup the group directory, unless the user wants the files. + if $at_debug_p; then + at_func_create_debugging_script + else + if test -d "$at_group_dir"; then + find "$at_group_dir" -type d ! -perm -700 -exec chmod u+rwx \{\} \; + rm -fr "$at_group_dir" + fi + rm -f "$at_test_source" + fi + ;; + *) + # Upon failure, include the log into the testsuite's global + # log. The failure message is written in the group log. It + # is later included in the global log. + $as_echo "$at_log_msg" >> "$at_group_log" + + # Upon failure, keep the group directory for autopsy, and create + # the debugging script. With -e, do not start any further tests. + at_func_create_debugging_script + if $at_errexit; then + echo stop > "$at_stop_file" + fi + ;; + esac +} + + +## ------------ ## +## Driver loop. ## +## ------------ ## + +rm -f "$at_stop_file" +at_first=: + +for at_group in $at_groups; do + at_func_group_prepare + if cd "$at_group_dir" && + at_func_test $at_group && + . "$at_test_source"; then :; else + { $as_echo "$as_me:$LINENO: WARNING: unable to parse test group: $at_group" >&5 +$as_echo "$as_me: WARNING: unable to parse test group: $at_group" >&2;} + at_failed=: + fi + at_func_group_postprocess + test -f "$at_stop_file" && break + at_first=false +done + +# Wrap up the test suite with summary statistics. +cd "$at_helper_dir" + +# Use ?..???? when the list must remain sorted, the faster * otherwise. +at_pass_list=`for f in */pass; do echo $f; done | sed '/\*/d; s,/pass,,'` +at_skip_list=`for f in */skip; do echo $f; done | sed '/\*/d; s,/skip,,'` +at_xfail_list=`for f in */xfail; do echo $f; done | sed '/\*/d; s,/xfail,,'` +at_xpass_list=`for f in ?/xpass ??/xpass ???/xpass ????/xpass; do + echo $f; done | sed '/?/d; s,/xpass,,'` +at_fail_list=`for f in ?/fail ??/fail ???/fail ????/fail; do + echo $f; done | sed '/?/d; s,/fail,,'` + +set X $at_pass_list $at_xpass_list $at_xfail_list $at_fail_list $at_skip_list +shift; at_group_count=$# +set X $at_xpass_list; shift; at_xpass_count=$#; at_xpass_list=$* +set X $at_xfail_list; shift; at_xfail_count=$# +set X $at_fail_list; shift; at_fail_count=$#; at_fail_list=$* +set X $at_skip_list; shift; at_skip_count=$# + +at_func_arith $at_group_count - $at_skip_count +at_run_count=$at_func_arith_result +at_func_arith $at_xpass_count + $at_fail_count +at_unexpected_count=$at_func_arith_result +at_func_arith $at_xfail_count + $at_fail_count +at_total_fail_count=$at_func_arith_result + +# Back to the top directory. +cd "$at_dir" +rm -rf "$at_helper_dir" + +# Compute the duration of the suite. +at_stop_date=`date` +at_stop_time=`date +%s 2>/dev/null` +$as_echo "$as_me: ending at: $at_stop_date" >&5 +case $at_start_time,$at_stop_time in + [0-9]*,[0-9]*) + at_func_arith $at_stop_time - $at_start_time + at_duration_s=$at_func_arith_result + at_func_arith $at_duration_s / 60 + at_duration_m=$at_func_arith_result + at_func_arith $at_duration_m / 60 + at_duration_h=$at_func_arith_result + at_func_arith $at_duration_s % 60 + at_duration_s=$at_func_arith_result + at_func_arith $at_duration_m % 60 + at_duration_m=$at_func_arith_result + at_duration="${at_duration_h}h ${at_duration_m}m ${at_duration_s}s" + $as_echo "$as_me: test suite duration: $at_duration" >&5 + ;; +esac + +echo +cat <<\_ASBOX +## ------------- ## +## Test results. ## +## ------------- ## +_ASBOX +echo +{ + echo + cat <<\_ASBOX +## ------------- ## +## Test results. ## +## ------------- ## +_ASBOX + echo +} >&5 + +if test $at_run_count = 1; then + at_result="1 test" + at_were=was +else + at_result="$at_run_count tests" + at_were=were +fi +if $at_errexit_p && test $at_unexpected_count != 0; then + if test $at_xpass_count = 1; then + at_result="$at_result $at_were run, one passed" + else + at_result="$at_result $at_were run, one failed" + fi + at_result="$at_result unexpectedly and inhibited subsequent tests." +else + # Don't you just love exponential explosion of the number of cases? + case $at_xpass_count:$at_fail_count:$at_xfail_count in + # So far, so good. + 0:0:0) at_result="$at_result $at_were successful." ;; + 0:0:*) at_result="$at_result behaved as expected." ;; + + # Some unexpected failures + 0:*:0) at_result="$at_result $at_were run, +$at_fail_count failed unexpectedly." ;; + + # Some failures, both expected and unexpected + 0:*:1) at_result="$at_result $at_were run, +$at_total_fail_count failed ($at_xfail_count expected failure)." ;; + 0:*:*) at_result="$at_result $at_were run, +$at_total_fail_count failed ($at_xfail_count expected failures)." ;; + + # No unexpected failures, but some xpasses + *:0:*) at_result="$at_result $at_were run, +$at_xpass_count passed unexpectedly." ;; + + # No expected failures, but failures and xpasses + *:1:0) at_result="$at_result $at_were run, +$at_unexpected_count did not behave as expected ($at_fail_count unexpected failure)." ;; + *:*:0) at_result="$at_result $at_were run, +$at_unexpected_count did not behave as expected ($at_fail_count unexpected failures)." ;; + + # All of them. + *:*:1) at_result="$at_result $at_were run, +$at_xpass_count passed unexpectedly, +$at_total_fail_count failed ($at_xfail_count expected failure)." ;; + *:*:*) at_result="$at_result $at_were run, +$at_xpass_count passed unexpectedly, +$at_total_fail_count failed ($at_xfail_count expected failures)." ;; + esac + + if test $at_skip_count = 0 && test $at_run_count -gt 1; then + at_result="All $at_result" + fi +fi + +# Now put skips in the mix. +case $at_skip_count in + 0) ;; + 1) at_result="$at_result +1 test was skipped." ;; + *) at_result="$at_result +$at_skip_count tests were skipped." ;; +esac + +if test $at_unexpected_count = 0; then + echo "$at_result" + echo "$at_result" >&5 +else + echo "ERROR: $at_result" >&2 + echo "ERROR: $at_result" >&5 + { + echo + cat <<\_ASBOX +## ------------------------ ## +## Summary of the failures. ## +## ------------------------ ## +_ASBOX + + # Summary of failed and skipped tests. + if test $at_fail_count != 0; then + echo "Failed tests:" + $SHELL "$at_myself" $at_fail_list --list + echo + fi + if test $at_skip_count != 0; then + echo "Skipped tests:" + $SHELL "$at_myself" $at_skip_list --list + echo + fi + if test $at_xpass_count != 0; then + echo "Unexpected passes:" + $SHELL "$at_myself" $at_xpass_list --list + echo + fi + if test $at_fail_count != 0; then + cat <<\_ASBOX +## ---------------------- ## +## Detailed failed tests. ## +## ---------------------- ## +_ASBOX + echo + for at_group in $at_fail_list + do + at_group_normalized=$at_group + + eval 'while :; do + case $at_group_normalized in #( + '"$at_format"'*) break;; + esac + at_group_normalized=0$at_group_normalized + done' + + cat "$at_suite_dir/$at_group_normalized/$as_me.log" + echo + done + echo + fi + if test -n "$at_top_srcdir"; then + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## ${at_top_build_prefix}config.log ## +_ASBOX + sed 's/^/| /' ${at_top_build_prefix}config.log + echo + fi + } >&5 + + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## $as_me.log was created. ## +_ASBOX + + echo + $as_echo "Please send \`${at_testdir+${at_testdir}/}$as_me.log' and all information you think might help: + + To: + Subject: [gdbm 1.10] $as_me: $at_fail_list${at_fail_list:+ failed${at_xpass_list:+, }}$at_xpass_list${at_xpass_list:+ passed unexpectedly} +" + if test $at_debug_p = false; then + echo + echo 'You may investigate any problem if you feel able to do so, in which' + echo 'case the test suite provides a good starting point. Its output may' + $as_echo "be found below \`${at_testdir+${at_testdir}/}$as_me.dir'." + echo + fi + exit 1 +fi + +exit 0 + +## ------------- ## +## Actual tests. ## +## ------------- ## +#AT_START_1 +# 1. version.at:17: gdbm version +at_setup_line='version.at:17' +at_desc="gdbm version" +$at_quiet $as_echo_n " 1: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "1. version.at:17: testing ..." + $at_traceon + + +{ $at_traceoff +$as_echo "$at_srcdir/version.at:19: gtver -lib -full -header -full" +echo version.at:19 >"$at_check_line_file" + +if test -n "$at_traceon"; then + ( $at_traceon; gtver -lib -full -header -full ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; gtver -lib -full -header -full ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "1.10.0 +1.10.0 +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/version.at:19" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_1 +#AT_START_2 +# 2. create00.at:17: create database +at_setup_line='create00.at:17' +at_func_banner 1 +at_desc="create database" +$at_quiet $as_echo_n " 2: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "2. create00.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/create00.at:20: + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:1000 > input +gtload test.db < input +gtdump test.db | sort -k1,2 -n > output +diff -u input output +" +echo create00.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:1000 > input +gtload test.db < input +gtdump test.db | sort -k1,2 -n > output +diff -u input output + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:1000 > input +gtload test.db < input +gtdump test.db | sort -k1,2 -n > output +diff -u input output + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/create00.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_2 +#AT_START_3 +# 3. fetch00.at:17: fetch a record +at_setup_line='fetch00.at:17' +at_func_banner 1 +at_desc="fetch a record" +$at_quiet $as_echo_n " 3: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "3. fetch00.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/fetch00.at:20: +num2word 1:10000 | gtload test.db +gtfetch test.db 1 2745 9999 +" +echo fetch00.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; +num2word 1:10000 | gtload test.db +gtfetch test.db 1 2745 9999 + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; +num2word 1:10000 | gtload test.db +gtfetch test.db 1 2745 9999 + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "one +two thousand seven hundred and fourty-five +nine thousand nine hundred and ninety-nine +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/fetch00.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_3 +#AT_START_4 +# 4. fetch01.at:17: fetch: nonexisting record +at_setup_line='fetch01.at:17' +at_func_banner 1 +at_desc="fetch: nonexisting record" +$at_quiet $as_echo_n " 4: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "4. fetch01.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/fetch01.at:20: +num2word 1:10000 | gtload test.db +gtfetch test.db 0 +" +echo fetch01.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; +num2word 1:10000 | gtload test.db +gtfetch test.db 0 + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; +num2word 1:10000 | gtload test.db +gtfetch test.db 0 + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +echo >>"$at_stderr"; $as_echo "gtfetch: 0: not found +" | \ + $at_diff - "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 2 $at_status "$at_srcdir/fetch01.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_4 +#AT_START_5 +# 5. delete00.at:17: delete a record +at_setup_line='delete00.at:17' +at_func_banner 1 +at_desc="delete a record" +$at_quiet $as_echo_n " 5: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "5. delete00.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/delete00.at:20: + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | gtload test.db +gtdel test.db 8 +gtdump test.db | sort -k1,2 -n +" +echo delete00.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | gtload test.db +gtdel test.db 8 +gtdump test.db | sort -k1,2 -n + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | gtload test.db +gtdel test.db 8 +gtdump test.db | sort -k1,2 -n + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "1 one +2 two +3 three +4 four +5 five +6 six +7 seven +9 nine +10 ten +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/delete00.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_5 +#AT_START_6 +# 6. delete01.at:17: delete: non existing record +at_setup_line='delete01.at:17' +at_func_banner 1 +at_desc="delete: non existing record" +$at_quiet $as_echo_n " 6: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "6. delete01.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/delete01.at:20: + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | gtload test.db +gtdel test.db 11 +" +echo delete01.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | gtload test.db +gtdel test.db 11 + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | gtload test.db +gtdel test.db 11 + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +echo >>"$at_stderr"; $as_echo "gtdel: cannot delete 11: Item not found +" | \ + $at_diff - "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 2 $at_status "$at_srcdir/delete01.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_6 +#AT_START_7 +# 7. delete02.at:17: delete: all records +at_setup_line='delete02.at:17' +at_func_banner 1 +at_desc="delete: all records" +$at_quiet $as_echo_n " 7: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "7. delete02.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/delete02.at:20: +num2word 1:10 | gtload test.db +gtdel test.db 1 2 3 4 5 6 7 8 9 10 +gtdump test.db +" +echo delete02.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; +num2word 1:10 | gtload test.db +gtdel test.db 1 2 3 4 5 6 7 8 9 10 +gtdump test.db + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; +num2word 1:10 | gtload test.db +gtdel test.db 1 2 3 4 5 6 7 8 9 10 +gtdump test.db + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/delete02.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_7 +#AT_START_8 +# 8. dbmcreate00.at:17: create database +at_setup_line='dbmcreate00.at:17' +at_func_banner 2 +at_desc="create database" +$at_quiet $as_echo_n " 8: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "8. dbmcreate00.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/dbmcreate00.at:20: + +test $COMPAT -eq 1 || exit 77 + + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:1000 > input +dtload test < input +dtdump test | sort -k1,2 -n > output +diff -u input output +" +echo dbmcreate00.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:1000 > input +dtload test < input +dtdump test | sort -k1,2 -n > output +diff -u input output + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:1000 > input +dtload test < input +dtdump test | sort -k1,2 -n > output +diff -u input output + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/dbmcreate00.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_8 +#AT_START_9 +# 9. dbmcvt.at:17: converting a 1.8-style database +at_setup_line='dbmcvt.at:17' +at_func_banner 2 +at_desc="converting a 1.8-style database" +$at_quiet $as_echo_n " 9: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "9. dbmcvt.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/dbmcvt.at:20: + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload test +rm test.dir +ln test.pag test.dir +dtfetch test 6 +cmp test.pag test.dir >/dev/null 2>&1 && exit 1 +exit 0 +" +echo dbmcvt.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload test +rm test.dir +ln test.pag test.dir +dtfetch test 6 +cmp test.pag test.dir >/dev/null 2>&1 && exit 1 +exit 0 + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload test +rm test.dir +ln test.pag test.dir +dtfetch test 6 +cmp test.pag test.dir >/dev/null 2>&1 && exit 1 +exit 0 + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "six +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/dbmcvt.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_9 +#AT_START_10 +# 10. dbmfetch00.at:17: fetch a record +at_setup_line='dbmfetch00.at:17' +at_func_banner 2 +at_desc="fetch a record" +$at_quiet $as_echo_n " 10: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "10. dbmfetch00.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/dbmfetch00.at:20: + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10000 | dtload test +dtfetch test 1 2745 9999 +" +echo dbmfetch00.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10000 | dtload test +dtfetch test 1 2745 9999 + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10000 | dtload test +dtfetch test 1 2745 9999 + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "one +two thousand seven hundred and fourty-five +nine thousand nine hundred and ninety-nine +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/dbmfetch00.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_10 +#AT_START_11 +# 11. dbmfetch01.at:17: fetch: nonexisting record +at_setup_line='dbmfetch01.at:17' +at_func_banner 2 +at_desc="fetch: nonexisting record" +$at_quiet $as_echo_n " 11: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "11. dbmfetch01.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/dbmfetch01.at:20: + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10000 | dtload test +dtfetch test 0 +" +echo dbmfetch01.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10000 | dtload test +dtfetch test 0 + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10000 | dtload test +dtfetch test 0 + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +echo >>"$at_stderr"; $as_echo "dtfetch: 0: not found +" | \ + $at_diff - "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 2 $at_status "$at_srcdir/dbmfetch01.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_11 +#AT_START_12 +# 12. dbmfetch02.at:17: fetch from a read-only database +at_setup_line='dbmfetch02.at:17' +at_func_banner 2 +at_desc="fetch from a read-only database" +$at_quiet $as_echo_n " 12: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "12. dbmfetch02.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/dbmfetch02.at:20: + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload test +chmod -w test.dir test.pag +dtfetch test 6 10 +" +echo dbmfetch02.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload test +chmod -w test.dir test.pag +dtfetch test 6 10 + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload test +chmod -w test.dir test.pag +dtfetch test 6 10 + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "six +ten +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/dbmfetch02.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_12 +#AT_START_13 +# 13. dbmfetch03.at:17: fetch from a read-only 1.8-style database +at_setup_line='dbmfetch03.at:17' +at_func_banner 2 +at_desc="fetch from a read-only 1.8-style database" +$at_quiet $as_echo_n " 13: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "13. dbmfetch03.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/dbmfetch03.at:20: + +test $COMPAT -eq 1 || exit 77 + +mkdir dir +cd dir +num2word 1:10 | dtload test +rm test.dir +ln test.pag test.dir +chmod -w test.dir test.pag . +dtfetch test 6 10 +" +echo dbmfetch03.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + +mkdir dir +cd dir +num2word 1:10 | dtload test +rm test.dir +ln test.pag test.dir +chmod -w test.dir test.pag . +dtfetch test 6 10 + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + +mkdir dir +cd dir +num2word 1:10 | dtload test +rm test.dir +ln test.pag test.dir +chmod -w test.dir test.pag . +dtfetch test 6 10 + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "six +ten +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/dbmfetch03.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_13 +#AT_START_14 +# 14. dbmdel00.at:17: delete a record +at_setup_line='dbmdel00.at:17' +at_func_banner 2 +at_desc="delete a record" +$at_quiet $as_echo_n " 14: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "14. dbmdel00.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/dbmdel00.at:20: + +test $COMPAT -eq 1 || exit 77 + + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | dtload test +dtdel test 8 +dtdump test | sort -k1,2 -n +" +echo dbmdel00.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | dtload test +dtdel test 8 +dtdump test | sort -k1,2 -n + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | dtload test +dtdel test 8 +dtdump test | sort -k1,2 -n + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "1 one +2 two +3 three +4 four +5 five +6 six +7 seven +9 nine +10 ten +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/dbmdel00.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_14 +#AT_START_15 +# 15. dbmdel01.at:17: delete: non existing record +at_setup_line='dbmdel01.at:17' +at_func_banner 2 +at_desc="delete: non existing record" +$at_quiet $as_echo_n " 15: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "15. dbmdel01.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/dbmdel01.at:20: + +test $COMPAT -eq 1 || exit 77 + + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | dtload test +dtdel test 11 +" +echo dbmdel01.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | dtload test +dtdel test 11 + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + + +test -z "`sort < /dev/null 2>&1`" || exit 77 + +num2word 1:10 | dtload test +dtdel test 11 + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +echo >>"$at_stderr"; $as_echo "dtdel: cannot delete 11: Item not found +" | \ + $at_diff - "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 2 $at_status "$at_srcdir/dbmdel01.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_15 +#AT_START_16 +# 16. dbmdel02.at:17: delete: all records +at_setup_line='dbmdel02.at:17' +at_func_banner 2 +at_desc="delete: all records" +$at_quiet $as_echo_n " 16: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "16. dbmdel02.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/dbmdel02.at:20: + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload test +dtdel test 1 2 3 4 5 6 7 8 9 10 +dtdump test +" +echo dbmdel02.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload test +dtdel test 1 2 3 4 5 6 7 8 9 10 +dtdump test + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload test +dtdel test 1 2 3 4 5 6 7 8 9 10 +dtdump test + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/dbmdel02.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_16 +#AT_START_17 +# 17. setopt00.at:17: setopt +at_setup_line='setopt00.at:17' +at_func_banner 3 +at_desc="setopt" +$at_quiet $as_echo_n " 17: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "17. setopt00.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/setopt00.at:20: +num2word 1:1000 | gtload test.db || exit 2 +gtopt test.db '!MMAP' +" +echo setopt00.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; +num2word 1:1000 | gtload test.db || exit 2 +gtopt test.db '!MMAP' + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; +num2word 1:1000 | gtload test.db || exit 2 +gtopt test.db '!MMAP' + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "GDBM_GETFLAGS: PASS +* CACHESIZE: +initial GDBM_SETCACHESIZE: PASS +GDBM_GETCACHESIZE: PASS +second GDBM_SETCACHESIZE: XFAIL +* SYNCMODE: +initial GDBM_GETSYNCMODE: PASS +GDBM_SETSYNCMODE: PASS +GDBM_GETSYNCMODE: PASS +GDBM_SETSYNCMODE true: PASS +GDBM_GETSYNCMODE: PASS +GDBM_SETSYNCMODE false: PASS +GDBM_GETSYNCMODE: PASS +* CENTFREE: +initial GDBM_GETCENTFREE: PASS +GDBM_SETCENTFREE: PASS +GDBM_GETCENTFREE: FAIL +GDBM_SETCENTFREE true: PASS +GDBM_GETCENTFREE: FAIL +GDBM_SETCENTFREE false: PASS +GDBM_GETCENTFREE: FAIL +* COALESCEBLKS: +initial GDBM_GETCOALESCEBLKS: PASS +GDBM_SETCOALESCEBLKS: PASS +GDBM_GETCOALESCEBLKS: PASS +GDBM_SETCOALESCEBLKS true: PASS +GDBM_GETCOALESCEBLKS: PASS +GDBM_SETCOALESCEBLKS false: PASS +GDBM_GETCOALESCEBLKS: PASS +GDBM_GETDBNAME: PASS +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/setopt00.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_17 +#AT_START_18 +# 18. setopt01.at:17: setopt: mmap options +at_setup_line='setopt01.at:17' +at_func_banner 3 +at_desc="setopt: mmap options" +$at_quiet $as_echo_n " 18: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "18. setopt01.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/setopt01.at:20: +num2word 1:1000 | gtload test.db || exit 2 +gtopt test.db 'MMAP' > out +grep 'MMAP: SKIP' out >/dev/null && exit 77 +cat out +" +echo setopt01.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; +num2word 1:1000 | gtload test.db || exit 2 +gtopt test.db 'MMAP' > out +grep 'MMAP: SKIP' out >/dev/null && exit 77 +cat out + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; +num2word 1:1000 | gtload test.db || exit 2 +gtopt test.db 'MMAP' > out +grep 'MMAP: SKIP' out >/dev/null && exit 77 +cat out + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +echo >>"$at_stdout"; $as_echo "* MMAP: +initial GDBM_GETMMAP: PASS +GDBM_SETMMAP false: PASS +GDBM_GETMMAP: PASS +initial GDBM_GETMAXMAPSIZE: PASS +GDBM_SETMAXMAPSIZE: PASS +GDBM_GETMAXMAPSIZE: PASS +" | \ + $at_diff - "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/setopt01.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_18 +#AT_START_19 +# 19. cloexec00.at:17: cloexec: gdbm_open +at_setup_line='cloexec00.at:17' +at_func_banner 4 +at_desc="cloexec: gdbm_open" +$at_quiet $as_echo_n " 19: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "19. cloexec00.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/cloexec00.at:20: +g_open_ce \"\$abs_builddir/fdop\" +" +echo cloexec00.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; +g_open_ce "$abs_builddir/fdop" + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; +g_open_ce "$abs_builddir/fdop" + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/cloexec00.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_19 +#AT_START_20 +# 20. cloexec01.at:17: cloexec: gdbm_reorganize +at_setup_line='cloexec01.at:17' +at_func_banner 4 +at_desc="cloexec: gdbm_reorganize" +$at_quiet $as_echo_n " 20: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "20. cloexec01.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/cloexec01.at:20: +g_reorg_ce \"\$abs_builddir/fdop\" +" +echo cloexec01.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; +g_reorg_ce "$abs_builddir/fdop" + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; +g_reorg_ce "$abs_builddir/fdop" + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/cloexec01.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_20 +#AT_START_21 +# 21. cloexec02.at:17: cloexec: dbm_open +at_setup_line='cloexec02.at:17' +at_func_banner 4 +at_desc="cloexec: dbm_open" +$at_quiet $as_echo_n " 21: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "21. cloexec02.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/cloexec02.at:20: + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload file +d_creat_ce \"\$abs_builddir/fdop\" +" +echo cloexec02.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload file +d_creat_ce "$abs_builddir/fdop" + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + +num2word 1:10 | dtload file +d_creat_ce "$abs_builddir/fdop" + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/cloexec02.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_21 +#AT_START_22 +# 22. cloexec03.at:17: cloexec: dbm_open -creat +at_setup_line='cloexec03.at:17' +at_func_banner 4 +at_desc="cloexec: dbm_open -creat" +$at_quiet $as_echo_n " 22: $at_desc " +at_xfail=no +echo "# -*- compilation -*-" >> "$at_group_log" +( + $as_echo "22. cloexec03.at:17: testing ..." + $at_traceon + + + +{ $at_traceoff +$as_echo "$at_srcdir/cloexec03.at:20: + +test $COMPAT -eq 1 || exit 77 + +d_creat_ce \"\$abs_builddir/fdop\" -creat +" +echo cloexec03.at:20 >"$at_check_line_file" + +if { echo 'Not enabling shell tracing (command contains an embedded newline)' + false; }; then + ( $at_traceon; + +test $COMPAT -eq 1 || exit 77 + +d_creat_ce "$abs_builddir/fdop" -creat + ) >"$at_stdout" 2>"$at_stder1" + at_func_filter_trace $? +else + ( :; + +test $COMPAT -eq 1 || exit 77 + +d_creat_ce "$abs_builddir/fdop" -creat + ) >"$at_stdout" 2>"$at_stderr" +fi +at_status=$? +at_failed=false +at_func_diff_devnull "$at_stderr" || at_failed=: +at_func_diff_devnull "$at_stdout" || at_failed=: +at_func_check_status 0 $at_status "$at_srcdir/cloexec03.at:20" + +$at_failed && at_func_log_failure +$at_traceon; } + + + $at_traceoff + $at_times_p && times >"$at_times_file" +) 5>&1 2>&1 | eval $at_tee_pipe +at_status=`cat "$at_status_file"` +#AT_STOP_22 diff --git a/tests/testsuite.at b/tests/testsuite.at new file mode 100644 index 0000000..1e7373c --- /dev/null +++ b/tests/testsuite.at @@ -0,0 +1,73 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +m4_version_prereq([2.52g]) + +m4_define([AT_SKIP_TEST],[exit 77]) + +dnl AT_SORT_PREREQ - Skip test if sort utility outputs unwanted data on stderr +m4_define([AT_SORT_PREREQ],[ +test -z "`sort < /dev/null 2>&1`" || AT_SKIP_TEST +]) + +m4_define([AT_COMPAT_PREREQ],[ +test $COMPAT -eq 1 || AT_SKIP_TEST +]) + +dnl # Begin tests + +AT_INIT +m4_include([version.at]) + +AT_BANNER([GDBM interface]) + +m4_include([create00.at]) + +m4_include([fetch00.at]) +m4_include([fetch01.at]) + +m4_include([delete00.at]) +m4_include([delete01.at]) +m4_include([delete02.at]) + +AT_BANNER([Compatibility library (dbm/ndbm)]) + +m4_include([dbmcreate00.at]) + +m4_include([dbmcvt.at]) + +m4_include([dbmfetch00.at]) +m4_include([dbmfetch01.at]) +m4_include([dbmfetch02.at]) +m4_include([dbmfetch03.at]) + +m4_include([dbmdel00.at]) +m4_include([dbmdel01.at]) +m4_include([dbmdel02.at]) + +AT_BANNER([DB options]) + +m4_include([setopt00.at]) +m4_include([setopt01.at]) + +AT_BANNER([Cloexec]) + +m4_include([cloexec00.at]) +m4_include([cloexec01.at]) +m4_include([cloexec02.at]) +m4_include([cloexec03.at]) + +# End of testsuite.at diff --git a/tests/version.at b/tests/version.at new file mode 100644 index 0000000..8959d75 --- /dev/null +++ b/tests/version.at @@ -0,0 +1,25 @@ +# This file is part of GDBM. -*- autoconf -*- +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# GDBM is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GDBM is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GDBM. If not, see . */ + +AT_SETUP([gdbm version]) + +AT_CHECK([gtver -lib -full -header -full], +[0], +[AT_PACKAGE_VERSION_MAJOR.AT_PACKAGE_VERSION_MINOR.AT_PACKAGE_VERSION_PATCH +AT_PACKAGE_VERSION_MAJOR.AT_PACKAGE_VERSION_MINOR.AT_PACKAGE_VERSION_PATCH +]) + +AT_CLEANUP -- 2.7.4