From 2a42870778b78c11d2f4fb1cbc515b5176aaad88 Mon Sep 17 00:00:00 2001 From: Nevo Hed Date: Thu, 15 Aug 2019 18:08:44 -0400 Subject: [PATCH] net: mvpp2: use new MVMDIO driver This commit ports mvpp2 to use the recently introduced Marvell MDIO (MVMDIO) driver. It removes direct interaction with the SMI & XSMI busses. This commit is based in part on earlier work by Ken Ma in Marvell's own downstream repo: https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/c81dc39. The above refrenced work was based on an MVMDIO implementation that never made it into U-Boot. With this patch the mvpp2 driver switches to use the new MVMDIO driver that is based on a more universal mdio-uclass implementation. Signed-off-by: Nevo Hed Reviewed-by: Ramon Fried Acked-by: Joe Hershberger --- drivers/net/mvpp2.c | 195 +++++----------------------------------------------- 1 file changed, 18 insertions(+), 177 deletions(-) diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c index 64b03bf..c5d1f9c 100644 --- a/drivers/net/mvpp2.c +++ b/drivers/net/mvpp2.c @@ -33,6 +33,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -63,8 +64,6 @@ do { \ #define MTU 1500 #define RX_BUFFER_SIZE (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN)) -#define MVPP2_SMI_TIMEOUT 10000 - /* RX Fifo Registers */ #define MVPP2_RX_DATA_FIFO_SIZE_REG(port) (0x00 + 4 * (port)) #define MVPP2_RX_ATTR_FIFO_SIZE_REG(port) (0x20 + 4 * (port)) @@ -491,23 +490,8 @@ do { \ #define MVPP2_QUEUE_NEXT_DESC(q, index) \ (((index) < (q)->last_desc) ? ((index) + 1) : 0) -/* SMI: 0xc0054 -> offset 0x54 to lms_base */ -#define MVPP21_SMI 0x0054 /* PP2.2: SMI: 0x12a200 -> offset 0x1200 to iface_base */ #define MVPP22_SMI 0x1200 -#define MVPP2_PHY_REG_MASK 0x1f -/* SMI register fields */ -#define MVPP2_SMI_DATA_OFFS 0 /* Data */ -#define MVPP2_SMI_DATA_MASK (0xffff << MVPP2_SMI_DATA_OFFS) -#define MVPP2_SMI_DEV_ADDR_OFFS 16 /* PHY device address */ -#define MVPP2_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr*/ -#define MVPP2_SMI_OPCODE_OFFS 26 /* Write/Read opcode */ -#define MVPP2_SMI_OPCODE_READ (1 << MVPP2_SMI_OPCODE_OFFS) -#define MVPP2_SMI_READ_VALID (1 << 27) /* Read Valid */ -#define MVPP2_SMI_BUSY (1 << 28) /* Busy */ - -#define MVPP2_PHY_ADDR_MASK 0x1f -#define MVPP2_PHY_REG_MASK 0x1f /* Additional PPv2.2 offsets */ #define MVPP22_MPCS 0x007000 @@ -953,7 +937,6 @@ struct mvpp2_port { /* Per-port registers' base address */ void __iomem *base; - void __iomem *mdio_base; struct mvpp2_rx_queue **rxqs; struct mvpp2_tx_queue **txqs; @@ -974,9 +957,8 @@ struct mvpp2_port { struct phy_device *phy_dev; phy_interface_t phy_interface; - int phy_node; int phyaddr; - struct mii_dev *bus; + struct udevice *mdio_dev; #ifdef CONFIG_DM_GPIO struct gpio_desc phy_reset_gpio; struct gpio_desc phy_tx_disable_gpio; @@ -4500,8 +4482,8 @@ static void mvpp2_phy_connect(struct udevice *dev, struct mvpp2_port *port) struct phy_device *phy_dev; if (!port->init || port->link == 0) { - phy_dev = phy_connect(port->bus, port->phyaddr, dev, - port->phy_interface); + phy_dev = dm_mdio_phy_connect(port->mdio_dev, port->phyaddr, + dev, port->phy_interface); /* * If the phy doesn't match with any existing u-boot drivers the @@ -4586,7 +4568,7 @@ static int mvpp2_open(struct udevice *dev, struct mvpp2_port *port) return err; } - if (port->phy_node) { + if (port->phyaddr < PHY_MAX_ADDR) { mvpp2_phy_connect(dev, port); mvpp2_link_event(port); } else { @@ -4725,35 +4707,25 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port) u32 id; u32 phyaddr = 0; int phy_mode = -1; - - /* Default mdio_base from the same eth base */ - if (port->priv->hw_version == MVPP21) - port->mdio_base = port->priv->lms_base + MVPP21_SMI; - else - port->mdio_base = port->priv->iface_base + MVPP22_SMI; + int ret; phy_node = fdtdec_lookup_phandle(gd->fdt_blob, port_node, "phy"); if (phy_node > 0) { - ofnode phy_ofnode; - fdt_addr_t phy_base; - + int parent; phyaddr = fdtdec_get_int(gd->fdt_blob, phy_node, "reg", 0); if (phyaddr < 0) { dev_err(&pdev->dev, "could not find phy address\n"); return -1; } - - phy_ofnode = ofnode_get_parent(offset_to_ofnode(phy_node)); - phy_base = ofnode_get_addr(phy_ofnode); - port->mdio_base = (void *)phy_base; - - if (port->mdio_base < 0) { - dev_err(&pdev->dev, "could not find mdio base address\n"); - return -1; - } + parent = fdt_parent_offset(gd->fdt_blob, phy_node); + ret = uclass_get_device_by_of_offset(UCLASS_MDIO, parent, + &port->mdio_dev); + if (ret) + return ret; } else { - phy_node = 0; + /* phy_addr is set to invalid value */ + phyaddr = PHY_MAX_ADDR; } phy_mode_str = fdt_getprop(gd->fdt_blob, port_node, "phy-mode", NULL); @@ -4791,7 +4763,6 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port) port->first_rxq = port->id * rxq_number; else port->first_rxq = port->id * port->priv->max_port_rxqs; - port->phy_node = phy_node; port->phy_interface = phy_mode; port->phyaddr = phyaddr; @@ -5068,118 +5039,6 @@ static int mvpp2_init(struct udevice *dev, struct mvpp2 *priv) return 0; } -/* SMI / MDIO functions */ - -static int smi_wait_ready(struct mvpp2_port *priv) -{ - u32 timeout = MVPP2_SMI_TIMEOUT; - u32 smi_reg; - - /* wait till the SMI is not busy */ - do { - /* read smi register */ - smi_reg = readl(priv->mdio_base); - if (timeout-- == 0) { - printf("Error: SMI busy timeout\n"); - return -EFAULT; - } - } while (smi_reg & MVPP2_SMI_BUSY); - - return 0; -} - -/* - * mpp2_mdio_read - miiphy_read callback function. - * - * Returns 16bit phy register value, or 0xffff on error - */ -static int mpp2_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) -{ - struct mvpp2_port *priv = bus->priv; - u32 smi_reg; - u32 timeout; - - /* check parameters */ - if (addr > MVPP2_PHY_ADDR_MASK) { - printf("Error: Invalid PHY address %d\n", addr); - return -EFAULT; - } - - if (reg > MVPP2_PHY_REG_MASK) { - printf("Err: Invalid register offset %d\n", reg); - return -EFAULT; - } - - /* wait till the SMI is not busy */ - if (smi_wait_ready(priv) < 0) - return -EFAULT; - - /* fill the phy address and regiser offset and read opcode */ - smi_reg = (addr << MVPP2_SMI_DEV_ADDR_OFFS) - | (reg << MVPP2_SMI_REG_ADDR_OFFS) - | MVPP2_SMI_OPCODE_READ; - - /* write the smi register */ - writel(smi_reg, priv->mdio_base); - - /* wait till read value is ready */ - timeout = MVPP2_SMI_TIMEOUT; - - do { - /* read smi register */ - smi_reg = readl(priv->mdio_base); - if (timeout-- == 0) { - printf("Err: SMI read ready timeout\n"); - return -EFAULT; - } - } while (!(smi_reg & MVPP2_SMI_READ_VALID)); - - /* Wait for the data to update in the SMI register */ - for (timeout = 0; timeout < MVPP2_SMI_TIMEOUT; timeout++) - ; - - return readl(priv->mdio_base) & MVPP2_SMI_DATA_MASK; -} - -/* - * mpp2_mdio_write - miiphy_write callback function. - * - * Returns 0 if write succeed, -EINVAL on bad parameters - * -ETIME on timeout - */ -static int mpp2_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, - u16 value) -{ - struct mvpp2_port *priv = bus->priv; - u32 smi_reg; - - /* check parameters */ - if (addr > MVPP2_PHY_ADDR_MASK) { - printf("Error: Invalid PHY address %d\n", addr); - return -EFAULT; - } - - if (reg > MVPP2_PHY_REG_MASK) { - printf("Err: Invalid register offset %d\n", reg); - return -EFAULT; - } - - /* wait till the SMI is not busy */ - if (smi_wait_ready(priv) < 0) - return -EFAULT; - - /* fill the phy addr and reg offset and write opcode and data */ - smi_reg = value << MVPP2_SMI_DATA_OFFS; - smi_reg |= (addr << MVPP2_SMI_DEV_ADDR_OFFS) - | (reg << MVPP2_SMI_REG_ADDR_OFFS); - smi_reg &= ~MVPP2_SMI_OPCODE_READ; - - /* write the smi register */ - writel(smi_reg, priv->mdio_base); - - return 0; -} - static int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp) { struct mvpp2_port *port = dev_get_priv(dev); @@ -5192,7 +5051,7 @@ static int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp) struct mvpp2_rx_queue *rxq; u8 *data; - if (port->phy_node) + if (port->phyaddr < PHY_MAX_ADDR) if (!port->phy_dev->link) return 0; @@ -5261,7 +5120,7 @@ static int mvpp2_send(struct udevice *dev, void *packet, int length) int tx_done; int timeout; - if (port->phy_node) + if (port->phyaddr < PHY_MAX_ADDR) if (!port->phy_dev->link) return 0; @@ -5445,31 +5304,13 @@ static int mvpp2_probe(struct udevice *dev) { struct mvpp2_port *port = dev_get_priv(dev); struct mvpp2 *priv = dev_get_priv(dev->parent); - struct mii_dev *bus; int err; /* Only call the probe function for the parent once */ if (!priv->probe_done) err = mvpp2_base_probe(dev->parent); - port->priv = dev_get_priv(dev->parent); - - /* Create and register the MDIO bus driver */ - bus = mdio_alloc(); - if (!bus) { - printf("Failed to allocate MDIO bus\n"); - return -ENOMEM; - } - - bus->read = mpp2_mdio_read; - bus->write = mpp2_mdio_write; - snprintf(bus->name, sizeof(bus->name), dev->name); - bus->priv = (void *)port; - port->bus = bus; - - err = mdio_register(bus); - if (err) - return err; + port->priv = priv; err = phy_info_parse(dev, port); if (err) @@ -5498,7 +5339,7 @@ static int mvpp2_probe(struct udevice *dev) port->gop_id * MVPP22_PORT_OFFSET; /* Set phy address of the port */ - if(port->phy_node) + if (port->phyaddr < PHY_MAX_ADDR) mvpp22_smi_phy_addr_cfg(port); /* GoP Init */ -- 2.7.4