From 29e5c027889ed583fd04d87927e714201b47a225 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Thu, 15 Oct 2020 14:52:30 +0200 Subject: [PATCH] board: stm32mp1: no MTD partitions fixup for serial boot Remove the update of the MTD partitions in kernel device tree for serial boot (USB / UART), and the kernel will use the MTD partitions define in the loaded DTB because U-Boot can't known the expected flash layout in this case. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- board/st/stm32mp1/stm32mp1.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 03a19af..8a3ce0a 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -848,9 +848,14 @@ int ft_board_setup(void *blob, struct bd_info *bd) { "st,stm32mp15-fmc2", MTD_DEV_TYPE_NAND, }, { "st,stm32mp1-fmc2-nfc", MTD_DEV_TYPE_NAND, }, }; - - if (IS_ENABLED(CONFIG_FDT_FIXUP_PARTITIONS)) - fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); + char *boot_device; + + /* Check the boot-source and don't update MTD for serial or usb boot */ + boot_device = env_get("boot_device"); + if (!boot_device || + (strcmp(boot_device, "serial") && strcmp(boot_device, "usb"))) + if (IS_ENABLED(CONFIG_FDT_FIXUP_PARTITIONS)) + fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); return 0; } -- 2.7.4