From 296759c91e60c7fc84708d926161ee928697b0eb Mon Sep 17 00:00:00 2001 From: Wadim Egorov Date: Thu, 21 Jan 2016 13:57:13 +0100 Subject: [PATCH] ARM: dts: rockchip: Bump sd card pin drive strength up on firefly boards It seems some firefly boards need 12mA drive strength for sdmmc. Using 4mA/8mA drive strength will cause the kernel to fail to recognize the sd card correctly. Increased the sdmmc lines drive strength from 4mA to 12mA. Signed-off-by: Wadim Egorov Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-firefly.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 4e3fd9a..49ec20d 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -408,6 +408,11 @@ output-low; }; + pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { + bias-pull-up; + drive-strength = <12>; + }; + act8846 { pwr_hold: pwr-hold { rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; @@ -457,6 +462,25 @@ }; sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on firefly board so bump up to 12ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + sdmmc_pwr: sdmmc-pwr { rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; }; -- 2.7.4