From 2805b9ab7c836cfbe01e86129983e36205078cb2 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 17 Jun 2012 21:14:27 +0100 Subject: [PATCH] ARM: 7427/1: mmc: mmci: Defer probe() in case of yet uninitialized GPIOs If the GPIOs used by the MMCI driver are not registered yet when the driver is probe()d, they can't be used. This happens if the mmci driver is probed before the respective GPIO controller (e.g. on the LPC32xx EA3250 board, the PCA9532 GPIO controller would be initialized via DT after mmci). Therefore, we defer mmci in this case. Signed-off-by: Roland Stigge Acked-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 78d3e48..50ff19a 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1425,6 +1425,10 @@ static int __devinit mmci_probe(struct amba_device *dev, writel(0, host->base + MMCIMASK1); writel(0xfff, host->base + MMCICLEAR); + if (plat->gpio_cd == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio_cd; + } if (gpio_is_valid(plat->gpio_cd)) { ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)"); if (ret == 0) @@ -1448,6 +1452,10 @@ static int __devinit mmci_probe(struct amba_device *dev, if (ret >= 0) host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); } + if (plat->gpio_wp == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio_wp; + } if (gpio_is_valid(plat->gpio_wp)) { ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)"); if (ret == 0) -- 2.7.4