From 27a0faafdca53bda21ed340ca8f8960696dda049 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 11 May 2016 17:33:11 +0100 Subject: [PATCH] usb: dwc3: st: Fix USB_DR_MODE_PERIPHERAL configuration. Set USB3_FORCE_VBUSVALID when configured for USB_DR_MODE_PERIPHERAL mode, as it is required to have a working setup. This worked on the internal driver by relying on the reset value of the syscfg register as the bits aren't explicity cleared and set like the upstream driver. Also add a comment about what setting this bit means. Signed-off-by: Peter Griffin Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-st.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 5c0adb9..50d6ae6 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -129,12 +129,18 @@ static int st_dwc3_drd_init(struct st_dwc3 *dwc3_data) switch (dwc3_data->dr_mode) { case USB_DR_MODE_PERIPHERAL: - val &= ~(USB3_FORCE_VBUSVALID | USB3_DELAY_VBUSVALID + val &= ~(USB3_DELAY_VBUSVALID | USB3_SEL_FORCE_OPMODE | USB3_FORCE_OPMODE(0x3) | USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2 | USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2); - val |= USB3_DEVICE_NOT_HOST; + /* + * USB3_PORT2_FORCE_VBUSVALID When '1' and when + * USB3_PORT2_DEVICE_NOT_HOST = 1, forces VBUSVLDEXT2 input + * of the pico PHY to 1. + */ + + val |= USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID; break; case USB_DR_MODE_HOST: -- 2.7.4