From 27945ebe5b980f796fa04dd61511796ac5b80cc2 Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Fri, 6 Mar 2020 15:54:03 -0800 Subject: [PATCH] igc: Fix NFC queue redirection support The support for ethtool Network Flow Classification (NFC) queue redirection based on destination MAC address is currently broken in IGC. For instance, if we add the following rule, matching frames aren't enqueued on the expected rx queue. $ ethtool -N IFNAME flow-type ether dst 3c:fd:fe:9e:7f:71 queue 2 The issue here is due to the fact that igc_rar_set_index() is missing code to enable the queue selection feature from Receive Address High (RAH) register. This patch adds the missing code and fixes the issue. Signed-off-by: Andre Guedes Acked-by: Sasha Neftin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igc/igc_defines.h | 5 ++++- drivers/net/ethernet/intel/igc/igc_main.c | 11 ++++++++--- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h index 42fe4d7..af0c03d 100644 --- a/drivers/net/ethernet/intel/igc/igc_defines.h +++ b/drivers/net/ethernet/intel/igc/igc_defines.h @@ -63,8 +63,11 @@ * (RAR[15]) for our directed address used by controllers with * manageability enabled, allowing us room for 15 multicast addresses. */ +#define IGC_RAH_QSEL_MASK 0x000C0000 +#define IGC_RAH_QSEL_SHIFT 18 +#define IGC_RAH_QSEL_ENABLE BIT(28) #define IGC_RAH_AV 0x80000000 /* Receive descriptor valid */ -#define IGC_RAH_POOL_1 0x00040000 + #define IGC_RAL_MAC_ADDR_LEN 4 #define IGC_RAH_MAC_ADDR_LEN 2 diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 44366c1..85df936 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -780,13 +780,18 @@ static void igc_rar_set_index(struct igc_adapter *adapter, u32 index) rar_low = le32_to_cpup((__le32 *)(addr)); rar_high = le16_to_cpup((__le16 *)(addr + 4)); + if (adapter->mac_table[index].state & IGC_MAC_STATE_QUEUE_STEERING) { + u8 queue = adapter->mac_table[index].queue; + u32 qsel = IGC_RAH_QSEL_MASK & (queue << IGC_RAH_QSEL_SHIFT); + + rar_high |= qsel; + rar_high |= IGC_RAH_QSEL_ENABLE; + } + /* Indicate to hardware the Address is Valid. */ if (adapter->mac_table[index].state & IGC_MAC_STATE_IN_USE) { if (is_valid_ether_addr(addr)) rar_high |= IGC_RAH_AV; - - rar_high |= IGC_RAH_POOL_1 << - adapter->mac_table[index].queue; } wr32(IGC_RAL(index), rar_low); -- 2.7.4