From 27563cd9f8f52f09523e061985917c38f302bd0c Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 14 Sep 2017 17:28:12 +0300 Subject: [PATCH] ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USB There are some changes from the prototype board concerning LEDs and USB pins: - USBB power enable and red LED pins are inverted. - The polarity of LEDs is inverted too. Signed-off-by: Ludovic Desroches Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 9c9088c..f13ef4f 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -67,7 +67,7 @@ usb1: ohci@00400000 { num-ports = <3>; - atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; @@ -330,7 +330,7 @@ }; pinctrl_led_gpio_default: led_gpio_default { - pinmux = , + pinmux = , , ; bias-pull-up; @@ -396,7 +396,7 @@ }; pinctrl_usb_default: usb_default { - pinmux = , + pinmux = , ; bias-disable; }; @@ -520,17 +520,17 @@ red { label = "red"; - gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; }; green { label = "green"; - gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; }; blue { label = "blue"; - gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; -- 2.7.4