From 25e2ab17fd77e752597050980cec4efae7f87854 Mon Sep 17 00:00:00 2001 From: Sujith Date: Wed, 17 Mar 2010 14:25:22 +0530 Subject: [PATCH] ath9k_hw: always set the core clock for AR9271 When initializing the PLL on AR9271 we always need to set the core clock to 117MHz. While at it remove the baud rate settings for the serial device on the AR9271, the default settings work well unless you want to customize it. Signed-off-by: Sujith Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 34 ++-------------------------------- 1 file changed, 2 insertions(+), 32 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 023c38b..5bc5f5f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1006,22 +1006,6 @@ static void ath9k_hw_init_qos(struct ath_hw *ah) REG_WRITE(ah, AR_TXOP_12_15, 0xFFFFFFFF); } -static void ath9k_hw_change_target_baud(struct ath_hw *ah, u32 freq, u32 baud) -{ - u32 lcr; - u32 baud_divider = freq * 1000 * 1000 / 16 / baud; - - lcr = REG_READ(ah , 0x5100c); - lcr |= 0x80; - - REG_WRITE(ah, 0x5100c, lcr); - REG_WRITE(ah, 0x51004, (baud_divider >> 8)); - REG_WRITE(ah, 0x51000, (baud_divider & 0xff)); - - lcr &= ~0x80; - REG_WRITE(ah, 0x5100c, lcr); -} - static void ath9k_hw_init_pll(struct ath_hw *ah, struct ath9k_channel *chan) { @@ -1087,22 +1071,8 @@ static void ath9k_hw_init_pll(struct ath_hw *ah, /* Switch the core clock for ar9271 to 117Mhz */ if (AR_SREV_9271(ah)) { - if ((pll == 0x142c) || (pll == 0x2850) ) { - udelay(500); - /* set CLKOBS to output AHB clock */ - REG_WRITE(ah, 0x7020, 0xe); - /* - * 0x304: 117Mhz, ahb_ratio: 1x1 - * 0x306: 40Mhz, ahb_ratio: 1x1 - */ - REG_WRITE(ah, 0x50040, 0x304); - /* - * makes adjustments for the baud dividor to keep the - * targetted baud rate based on the used core clock. - */ - ath9k_hw_change_target_baud(ah, AR9271_CORE_CLOCK, - AR9271_TARGET_BAUD_RATE); - } + udelay(500); + REG_WRITE(ah, 0x50040, 0x304); } udelay(RTC_PLL_SETTLE_DELAY); -- 2.7.4