From 254a42ac93900f92307a280daf4ccbd118c72255 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Wed, 4 Nov 2020 19:48:51 +0300 Subject: [PATCH] dt-bindings: tegra30-actmon: Document OPP and interconnect properties Document EMC DFS OPP table and interconnect paths that will be used for scaling of system's memory bandwidth based on memory utilization statistics. Previously ACTMON was supposed to drive EMC clock rate directly, but now it should do it using interconnect framework in order to support shared voltage scaling in addition to the frequency scaling. Signed-off-by: Dmitry Osipenko Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201104164923.21238-16-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski --- .../bindings/arm/tegra/nvidia,tegra30-actmon.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt index ea670a5..897eedf 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt @@ -18,8 +18,30 @@ clock-names. See ../../clock/clock-bindings.txt for details. ../../reset/reset.txt for details. - reset-names: Must include the following entries: - actmon +- operating-points-v2: See ../bindings/opp/opp.txt for details. +- interconnects: Should contain entries for memory clients sitting on + MC->EMC memory interconnect path. +- interconnect-names: Should include name of the interconnect path for each + interconnect entry. Consult TRM documentation for + information about available memory clients, see MEMORY + CONTROLLER section. + +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: bitfield indicating SoC speedo ID mask +- opp-peak-kBps: peak bandwidth of the memory channel Example: + dfs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp@12750000 { + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <51000>; + }; + ... + }; + actmon@6000c800 { compatible = "nvidia,tegra124-actmon"; reg = <0x0 0x6000c800 0x0 0x400>; @@ -29,4 +51,7 @@ Example: clock-names = "actmon", "emc"; resets = <&tegra_car 119>; reset-names = "actmon"; + operating-points-v2 = <&dfs_opp_table>; + interconnects = <&mc TEGRA124_MC_MPCORER &emc>; + interconnect-names = "cpu"; }; -- 2.7.4